On Mon, Aug 02, 2010 at 01:20:54PM +0200, Stefan Reinauer wrote:
On 02.08.2010, at 12:43, xdrudis xdrudis@tinet.cat wrote:
On Mon, Aug 02, 2010 at 11:54:15AM +0200, Rudolf Marek wrote:
When I boot with the propietary BIOS I can get GRUB2 and linux console on the serial port, but only at 38400 bps. 118000 does not work. So I've put 38400 in kconfig too.
Hm this is strange. Maybe you can try with 9600 ?
I'll try. Since docs say 118000 I thought the furthest from that the worst, so I didn't try.
Sure it's not 115200? 118000 sounds very unusual.
Stefan
Mph. :-( I feel more stupid than usual. Sorry for the noise. I just tried again with 115200 and grub 2 and linux console work with the propietary BIOS. I don't know what I did wrong the first time... The only thing I find different is that now I'm using ssh to access the other side of the null modem cable (an EPIA-M computer) and the other time I was using the keyboard at the EPIA-M console. I must have done some silly mistake the other time.
But coreboot won't work yet at 9600, 38400 nor 115200 (I've rechecked I din't had the it8712f_24mhz_in call ).
I'm going to try serialICE next.
Thanks.