RE: Bare Metal bootloader built, now how do I use it?

[steven james]

Greetings,

You can 'sort of' manage it in theory. Put the bootselect.elf on your boot
server and set up dhcpd.conf filename= line to send bootselect.elf.

Since your flash won't have any tags, you'll see it come up on serial,
then fail (since it won't find any tags).

G'day,
sjames

On Wed, 19 Mar 2003, Gregg C Levine wrote:
> Hello again from Gregg C Levine
> Thought you should know, that I've built my copy of the Bare Metal
> bootloader. According to your notes below, it gets used with an Ether
> boot, and the memory tester. And that I'd need to build my Linux BIOS
> builds with that serial setting turned on. One quick question before I
> do all that, can I simply test Bare Metal, by sending it via an
> etherboot device to the system in question? Your notes say I can. But
> how?
> Gregg C Levine [e-mail]
>
> "The Force will be with you...Always." Obi-Wan Kenobi
> "Use the Force, Luke."� Obi-Wan Kenobi
> (This company dedicates this E-Mail to General Obi-Wan Kenobi )
> (This company dedicates this E-Mail to Master Yoda )
> > -----Original Message-----
> > From: steven james [mailto:[e-mail]]
> > Sent: Saturday, March 15, 2003 4:46 PM
> > To: Gregg C Levine
> > Cc: Linuxbios
> > Subject: Re: Bare Metal bootloader built, now how do I use it?
> >
> > Greetings,
> >
> > I should document this :-)
> >
> > The bootselect will scan the ROM for payload tags (see
> > baremetal/include/rom/read_bytes.h)
> >
> > The signature is $TAG$
> >
> > the data field and any subsequent 16 byte blocks of the tag contain
>
> an
> > ASCIIZ name for the payload.
> >
> > Currently, it's hardwired to the serial console. When it runs, if
>
> there is
> > a byte waiting in the rx buffer, it will present a list and wait for
>
> a
> > numerical selection, otherwise, it will chain to the default payload
> > (the one that follows bootselect).
> >
> > You'll want to build LinuxBIOS with option PYRO_SERIAL so that the
>
> rx
> > buffer will accept and hold your keypress (giving you enough time to
>
> hit
> > space).
> >
> > Usually, I use it with an etherboot or two, memtest86, and a forth
> > environment I'm working on (not in the tree yet since the build is a
> > mess).
> >
> > G'day,
> > sjames
> >
> > On Fri, 14 Mar 2003, Gregg C Levine wrote:
> > > Hello from Gregg C Levine
> > > Okay, here is what I mean.
> > > I have successfully built the Bare Metal boot loader. Now the
>
> question
> > > is, or should be:
> > > How do I use it?
> > >
> > > Steven this is an interesting project. Now I'm just fishing for
> > > advice.
> > > Gregg C Levine [e-mail]
> > >
> > > "The Force will be with you...Always." Obi-Wan Kenobi
> > > "Use the Force, Luke."� Obi-Wan Kenobi
> > > (This company dedicates this E-Mail to General Obi-Wan Kenobi )
> > > (This company dedicates this E-Mail to Master Yoda )
> > >
> > > Linuxbios mailing list
> > > [e-mail]
> > > http://www.clustermatic.org/mailman/listinfo/linuxbios
>
> labs
> > ... ........ ..... ....                    230 peachtree st nw ste
>
> 2701
> > the original linux labs                             atlanta.ga.us
>
> 30303
> >   -since 1995
>
> http://www.linuxlabs.com
> >                                office 404.577.7747 fax
>
> 404.577.7743
> >
> >
>
> Linuxbios mailing list
> [e-mail]
> http://www.clustermatic.org/mailman/listinfo/linuxbios