You might want to try Linux MTD (Look in the kernel or http://www.linux-mtd.infradead.org/ ) if you're using flash_n_burn.
On Wed, 24 Dec 2003, Surjan Singh wrote:
Hello,
Wondering if anyone can help me with this one:
I have a basic EPIA board (http://www.viavpsd.com/product/epia_mini_itx_spec.jsp?motherboardId=21) , the one with the 533MHz CPU.
Anyway, I managed to find myself a PLCC Flash chip which seems like it will work (http://www.farnell.com/datasheets/23247.pdf), but when I run the flash program it complains that it does not recognise the chip. So, I added an entry for the chip in "flash.h" hoping I could use the regular routines for the EPIA, but it says it cannot unlock the chip.
Can someone help me with this one pls? Could someone supply a diff, using the above datasheet, that would enable me to use the chip? Even some tips on what I'd need to do if I had to write the code would be appreciated.
Thanks, Surj
Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios