Signed-off-by: Marc Bertens mbertens@xs4all.nl
Part two now the PIRQ table for the Nokia IP530.
Changes made: - rebuild the table to get th eNICs and PCMCIA controllers get there correct IRQs assigned. - Added a stub pirq_assign_irqs() due to the fact that it was missing at compilation time. This was discussed with Rudolf Marek (ruik) r.marek@assembler.cz
Marc
On Thu, 2010-05-27 at 11:56 +0200, mbertens wrote:
Hi all,
Here is the patch just for the pirq_routing() function. Its made specific to the CONFIG_NORTHBRIDGE_INTEL_440BX if that is to generic please replace by CONFIG_BOARD_NOKIA_IP530.
Put the following extras in the file;
- added header accordingly "Common License Header" that was missing.
- corrected a printk() warning of the compiler.
- added the correction for the i440BX by AND the link value with 0x5F
so that always the value is kept below 0x5F. That AND value should be 0x03 i think because the link value cannot be greater than 3. But i'm not sure about that, thats why i used the current solution.
The other patches will follow to day.
Marc
On Wed, 2010-05-26 at 15:14 -0600, Myles Watson wrote:
On Wed, May 26, 2010 at 2:15 PM, mbertens mbertens@xs4all.nl wrote:
On Wed, 2010-05-26 at 11:00 -0600, Myles Watson wrote:
// fix made by Marc Bertens <mbertens@xs4all.nl>
if (link > 0x5f) {
// This is basically for the 440BX
link -= 0x5f;
}
I'd prefer this to be guarded by #if CONFIG_NORTHBRIDGE_INTEL_440BX (or whatever the correct one is)
I was thinking of it to put it that way, but i'd. But i will make the changes to the code.