[coreboot] Re: inteltool does not properly dump gpio values for south bridge CM238 chipset

[Matt DeVillier]

whoops, I meant inteltool, not intelmetool

On Tue, May 21, 2019 at 6:14 PM Matt DeVillier 
wrote:
> support already exists in intelmetool for several 7th-gen/Kabylake
> platforms, just not KBL-H.  Easiest thing to try would be to add the PCI
> IDs into inteltool.h next to the existing ones for KBL north/south bridges
> (ie, add: #define PCI_DEVICE_ID_INTEL_CORE_7TH_GEN_H 0x5910) then add it
> everywhere the existing ones are referenced (inteltool.c, memory.c, pcie.c)
> and then recompile.  Actual looks like the southbridge already is, so just
> add the northbridge as per above
>
> On Tue, May 21, 2019 at 5:03 PM Justin Dong-Il Lee 
> wrote:
> > As the subject states, whenever I run inteltool -a under root, I do not
> > get any outputs. My dump is listed below. I am running a kaby lake 7820hq
> > for reference. Any help would be appreciated. Is kaby lake not supported
> > for coreboot?
> > Best,
> > ~Justin
> >
> > CPU: ID 0x906e9, Processor Type 0x0, Family 0x6, Model 0x9e, Stepping 0x9
> > Northbridge: 8086:5910 (unknown)
> > Southbridge: 8086:a154 (CM238)
> > IGD: 8086:591b (Intel(R) UHD Graphics 630)
> > Error: Dumping GPIOs on this southbridge is not (yet) supported.
> >
> > ============= RCBA ==============
> >
> > Error: Dumping RCBA on this southbridge is not (yet) supported.
> >
> > ========== PMBASE/ABASE =========
> >
> > Error: Dumping PMBASE on this southbridge is not (yet) supported.
> >
> > ============= MCHBAR ============
> >
> > Error: Dumping MCHBAR on this northbridge is not (yet) supported.
> >
> > ============= EPBAR =============
> >
> > Error: Dumping EPBAR on this northbridge is not (yet) supported.
> >
> > ============= DMIBAR ============
> >
> > Error: Dumping DMIBAR on this northbridge is not (yet) supported.
> >
> > ========= PCIEXBAR ========
> >
> > Error: Dumping PCIEXBAR on this northbridge is not (yet) supported.
> >
> > Error: Dumping MSRs on this CPU (0x0906e0) is not (yet) supported.
> >
> > ============= AMBs ============
> >
> > Error: Dumping AMBs on this MCH is not (yet) supported.
> >
> > ============= SPI / BIOS CNTL =============
> >
> > Error: Dumping SPI on this southbridge is not (yet) supported.
> >
> > ============= AHCI Registers ==============
> >
> > ABAR = 0xdf32b000 (MEM)
> >
> > coreboot mailing list -- [e-mail]
> > To unsubscribe send an email to [e-mail]