I will change the code to disable the lsi_scsi as the default.
Do you have lsi 1030 onboard? You need to use it?
If you need to use it, I send you pre-built image, because I can not publish the source code of lsi_scsi. LSI don’t want to.
Regards
YH
_____
发件人: HC Wang [mailto:hcwang@netd.com] 发送时间: 2004年4月26日 10:15 收件人: linuxbios@clustermatic.org 主题: tyan s2880 build broken?
Hi,
I checked out linuxbios2 tree from sourceforge.net, and I have problem with building bios for tyan s2880 motherboard, here is the error message from buildtarget tyan/s2880:
Configuring PART mainboard, path tyan/s2880 ===> NOTE: Changing default value of LB_CKS_RANGE_START ===> NOTE: Changing default value of LB_CKS_RANGE_END ===> NOTE: Changing default value of LB_CKS_LOC Configuring DIR ../common/lsi_scsi/Config.lb ===> ERROR: Could not open file "/home/hcwang/linux-bios/freebios2/src/mainboard/tyan/s2880/../common/lsi_sc si/Config.lb" tyan/s2880/Config.lb:0 mainboard/tyan/s2880/Config.lb:0 ../common/lsi_scsi/Config.lb:0 [hcwang@primary targets]$ pwd /home/hcwang/linux-bios/freebios2/targets
Has anybody experience similar problem?
Thanks, HC