Hi there
I try to config coreboot to use it on VIA EPIA-ME6000 with onboard vga. Therefore I changed Config.lb in src path.
Here output of lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266] 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] 00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics (rev 03)
Here my diff on Config.lb and Options.lb: Index: Options.lb =================================================================== --- Options.lb (Revision 3086) +++ Options.lb (Arbeitskopie) @@ -52,7 +52,7 @@ ### Build options ### default CONFIG_PCI_ROM_RUN=0 -default CONFIG_CONSOLE_VGA=0 +default CONFIG_CONSOLE_VGA=1
## ## Build code for the fallback boot Index: Config.lb =================================================================== --- Config.lb (Revision 3086) +++ Config.lb (Arbeitskopie) @@ -181,10 +181,18 @@ device pci 12.0 on end # Ethernet end # This is on the EPIA MII, not the M. - chip southbridge/ricoh/rl5c476 - register "enable_cf" = "1" - device pci 0a.0 on end - device pci 0a.1 on end - end +# chip southbridge/ricoh/rl5c476 +# register "enable_cf" = "1" +# device pci 0a.0 on end +# device pci 0a.1 on end +# end end + device pci_domain 1 on + device pci 0.0 on # PCI + chip drivers/pci/onboard + device pci 0.0 on end + register "rom_address" = "0xfffc0000" #256k image + end + end + end end
Please look at this config. Is it possible to use onboard vga with these parameters?
Klaus