Command? Max cpuid index : 1 Command? Vendor ID : AuthenticAMD Command? Processor Type : 0x00 Command? Processor Family : 0x06
Too many errors encountered; the rest of the message is ignored:
Processor Model : 0x08 Processor Mask : 0x00 Processor Stepping : 0x00 Feature flags : 0x0183f9ff
MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled
Disabling local apic...done. CPU #0 Initialized Allocating PCI resources... ASSIGN RESOURCES, bus 0 PCI: 00:00.0 10 <- [0xf8000000 - 0xfbffffff] mem PCI: 00:00.1 10 <- [0x00002c90 - 0x00002c93] io PCI: 00:00.1 14 <- [0x00002ca0 - 0x00002ca3] io PCI: 00:00.1 18 <- [0x00002cb0 - 0x00002cb3] io PCI: 00:00.1 1c <- [0x00002cc0 - 0x00002cc3] io PCI: 00:00.1 20 <- [0x00002c80 - 0x00002c8f] io PCI: 00:01.1 10 <- [0x00002000 - 0x000020ff] io PCI: 00:01.1 14 <- [0xfc100000 - 0xfc100fff] mem PCI: 00:01.2 10 <- [0xfc101000 - 0xfc101fff] mem PCI: 00:01.3 10 <- [0xfc102000 - 0xfc102fff] mem PCI: 00:01.4 10 <- [0x00002400 - 0x000024ff] io PCI: 00:01.4 14 <- [0xfc103000 - 0xfc103fff] mem PCI: 00:01.6 10 <- [0x00002800 - 0x000028ff] io PCI: 00:01.6 14 <- [0x00002c00 - 0x00002c7f] io PCI: 00:02.0 1c <- [0x00001000 - 0x00001fff] bus 1 ÿÿÿÿÿÿio PCI: 00:02.0 24 <- [0xf0000000 - 0xf7ffffff] bus 1 ÿÿÿÿÿÿprefmem PCI: 00:02.0 20 <- [0xfc000000 - 0xfc0fffff] bus 1 ÿÿÿÿÿÿmem ASSIGN RESOURCES, bus 1 PCI: 01:00.0 10 <- [0xf0000000 - 0xf7ffffff] prefmem PCI: 01:00.0 14 <- [0xfc000000 - 0xfc01ffff] mem PCI: 01:00.0 18 <- [0x00001000 - 0x0000107f] io Allocating VGA resource done. Enabling PCI resourcess...PCI: 00:00.0 cmd <- 07 PCI: 00:00.1 cmd <- 01 PCI: 00:01.0 cmd <- 0c PCI: 00:01.1 cmd <- 03 PCI: 00:01.2 cmd <- 02 PCI: 00:01.3 cmd <- 02 PCI: 00:01.4 cmd <- 03 PCI: 00:01.6 cmd <- 01 PCI: 00:02.0 cmd <- 27PCI: 01:00.0 cmd <- 03 done. Initializing PCI devices... PCI devices initialized Enabled in SIS 503 regs 0x40 and 0x45 handle_superio start, s 0000b040 nsuperio 1 s->super 0000b318 handle_superio Pass 1, check #0, s 0000b040 s->super 0000b318 handle_superio: Pass 1, Superio SiS 950 handle_superio port 0x2e, defaultport 0x2e handle_superio Using port 0x2e handle_superio Pass 1, done #0 handle_superio done PCCHIPS M810LMR (and similar)...Entering the initregs process Southbridge fixup done for SIS 503 handle_superio start, s 0000b040 nsuperio 1 s->super 0000b318 handle_superio Pass 2, check #0, s 0000b040 s->super 0000b318 handle_superio: Pass 2, Superio SiS 950 handle_superio port 0x2e, defaultport 0x2e handle_superio Using port 0x2e Call finishup handle_superio Pass 2, done #0 handle_superio done Copying IRQ routing tables to 0xf0000...done. Wrote linuxbios table at: 00000500 - 0000066c checksum bc14
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.2
37:init_bytes() - zkernel_start:0xfffc0000 zkernel_mask:0x0000ffffFound ELF candiate at offset 0 New segment addr 0x400000 size 0xcba0 offset 0x60 filesize 0x8789 (cleaned up) New segment addr 0x400000 size 0xcba0 offset 0x60 filesize
0x8789
Loading Segment: addr: 0x0000000000400000 memsz: 0x000000000000cba0 filesz: 0x0000000000008789 Clearing Segment: addr: 0x0000000000408789 memsz: 0x0000000000004417 Jumping to boot code ROM segment 0x0000 length 0x0000 reloc 0x0000 Etherboot 5.0.6 (GPL) ELF for [SIS900] Boot from (N)etwork or from (L)ocal? clocks_per_tick = 941374 N I am now initializing the ide system init_drive sectors_per_track = [32], num_heads = [16],num_cylinders=[984], num_sectors = [503808] LBA mode supported
Boot: (hd0,0)/kernel rawread (post_loop) ide_read_sector failed File not found Probing...[SIS900]Found SIS900 ROM address 0x0000 The PCI BIOS has not enabled this device! Updating PCI command 0003->0007. pci_bus 00 pci_device_fn 09 Found SIS 85C503/5513 PCI to ISA bridge ROM address 0x0000
sis900_probe: MAC addr 00:0A:E6:4B:4A:AF at ioaddr 0X2000 sis900_probe: Vendor:0X1039 Device:0X0900 sis900_probe: No MII transceivers found! No adapter found
<sleep> <abort> Boot from (N)etwork or from (L)ocal? N I am now initializing the ide system init_drive sectors_per_track = [32], num_heads = [16],num_cylinders=[984], num_sectors = [503808] LBA mode supported
Boot: (hd0,0)/kernel File not found Probing...[SIS900]Found SIS900 ROM address 0x0000 Found SIS 85C503/5513 PCI to ISA bridge ROM address 0x0000
sis900_probe: MAC addr 00:0A:E6:4B:4A:AF at ioaddr 0X2000 sis900_probe: Vendor:0X1039 Device:0X0900 sis900_probe: No MII transceivers found! No adapter found
<sleep> <abort> Boot from (N)etwork or from (L)ocal? N I am now initializing the ide system init_drive sectors_per_track = [32], num_heads = [16],num_cylinders=[984], num_sectors = [503808] LBA mode supported
Boot: (hd0,0)/kernel File not found Probing...[SIS900]Found SIS900 ROM address 0x0000 Found SIS 85C503/5513 PCI to ISA bridge ROM address 0x0000
sis900_probe: MAC addr 00:0A:E6:4B:4A:AÆ
this is the error on boot in my serial console, but in the Compact flash the file /kernel is here and don't have any problem.
Tnx Serafino