I resend the lspci dump with the pci vga card in lb/kernel: see lspci_lb.txt I resend the lspci dump with the pci vga card and the award bios: see lspci_award.txt One can see that - indeed the pci device is not show up in the system when booting with LinuxBIOS - the pci bridge (device 00:06.0) is in "Substractive decode" mode (prog-if 01) when booting with the proprietary bios and in "Normal decode" (prog-if 00) when booting with LB. Does this impact the scanning of the devices on the "normal" PCI bus (not PCI express)? (this could explain why my pci vga card is not seen..) Can a "PCI guru" on this list help with this issue please? Thank in advance!
Best regards, Florentin Demetrescu
Quoting yhlu yinghailu@gmail.com:
so it seems the pci device in the slot is not show up in your system...
can you check that with lspci in lb/kernel...?
YH
-- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios