Hi,
I'm trying to get my motherboard working with Linuxbios. I'm using ADLO with Linuxbios. The debug messages are as below. The problem is after jumping to linuxbiosmain (it prints "Welcome to start32......") it loops back , restarting the boot process all over again. what's wrong ? why does it go in a loop?
***************log********************************* LinuxBIOS-1.0.0 Thu Apr 24 06:42:06 IST 2003 starting... Ram1 Ram2 Ram3 Ram Enable 1 Ram Enable 2 Ram Enable 3 Ram Enable 4 Ram Enable 5 Ram4 Ram5 Ram6 Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.0.0 Thu Apr 24 06:42:06 IST 2003 booting... Finding PCI configuration type. PCI: Using configuration type 1 handle_superio start, nsuperio 1 handle_superio Pass 0, check #0, s 0000cde0 s->super 0000e138 handle_superio: Pass 0, Superio w83627hf handle_superio port 0x0, defaultport 0x2e handle_superio Using port 0x2e handle_superio Pass 0, done #0 handle_superio done Scanning PCI bus...PCI: pci_scan_bus for bus 0 PCI: 00:00.0 [8086/7124] PCI: 00:1e.0 [8086/2418] PCI: 00:1f.0 [8086/2410] PCI: 00:1f.1 [8086/2411] PCI: 00:1f.2 [8086/2412] PCI: 00:1f.3 [8086/2413] PCI: 00:1f.5 [8086/2415] PCI: 00:1f.6 [8086/2416] PCI: pci_scan_bus for bus 1 PCI: 01:04.0 [10ec/8139] PCI: 01:05.0 [10ec/8139] PCI: pci_scan_bus returning with max=01 PCI: pci_scan_bus returning with max=01 done Allocating PCI resources... ASSIGN RESOURCES, bus 0 PCI: 00:1e.0 1c <- [0x00001000 - 0x00001fff] bus 1 io PCI: 00:1e.0 24 <- [0xfec00000 - 0xfebfffff] bus 1 prefmem PCI: 00:1e.0 20 <- [0xfeb00000 - 0xfebfffff] bus 1 mem ASSIGN RESOURCES, bus 1 PCI: 01:04.0 10 <- [0x00001000 - 0x000010ff] io PCI: 01:04.0 14 <- [0xfeb00000 - 0xfeb000ff] mem PCI: 01:05.0 10 <- [0x00001400 - 0x000014ff] io PCI: 01:05.0 14 <- [0xfeb01000 - 0xfeb010ff] mem ASSIGNED RESOURCES, bus 1 PCI: 00:1f.1 20 <- [0x000028e0 - 0x000028ef] io PCI: 00:1f.2 20 <- [0x000028c0 - 0x000028df] io PCI: 00:1f.3 20 <- [0x000028f0 - 0x000028ff] io PCI: 00:1f.5 10 <- [0x00002000 - 0x000020ff] io PCI: 00:1f.5 14 <- [0x00002880 - 0x000028bf] io PCI: 00:1f.6 10 <- [0x00002400 - 0x000024ff] io PCI: 00:1f.6 14 <- [0x00002800 - 0x0000287f] io ASSIGNED RESOURCES, bus 0 done. Enabling PCI resourcess...PCI: 00:00.0 cmd <- 06 PCI: 00:1e.0 cmd <- 07 PCI: 00:1f.0 cmd <- 0f PCI: 00:1f.1 cmd <- 01 PCI: 00:1f.2 cmd <- 01 PCI: 00:1f.3 cmd <- 01 PCI: 00:1f.5 cmd <- 01 PCI: 00:1f.6 cmd <- 01 PCI: 01:04.0 cmd <- 03 PCI: 01:05.0 cmd <- 03 done. Initializing PCI devices... PCI devices initialized DRP0 = 0x9 DIMM0 - size = 64M DIMM1 - size = 0M DRP1 = 0x0 DIMM2 - size = 0M totalram: 64M Initializing CPU #0 Updating microcode microcode_info: sig = 0x00000678 pf=0x00000001 rev = 0x00000000 Enabling cache... Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) type: WB DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 64MB, type WB DONE variable MTRRs Clear out the extra MTRR's call intel_enable_fixed_mtrr() call intel_enable_var_mtrr() Leave setup_mtrrs done.
Max cpuid index : 1 Vendor ID : CentaurHauls Processor Type : 0x00 Processor Family : 0x06 Processor Model : 0x07 Processor Mask : 0x00 Processor Stepping : 0x08 Feature flags : 0x00803035
MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled
Configuring L2 cache...Not 'GenuineIntel' Processor Enable Cache done. Disabling local apic...done. CPU #0 Initialized ioapic southbridge enabled 180 RTC Init Invalid CMOS LB checksum set power on after power fail Please turn on nvram handle_superio start, nsuperio 1 handle_superio Pass 1, check #0, s 0000cde0 s->super 0000e138 handle_superio: Pass 1, Superio w83627hf handle_superio port 0x2e, defaultport 0x2e handle_superio Using port 0x2e Call init Enabling com device: 03 iobase = 0x02f8 irq=3 handle_superio Pass 1, done #0 handle_superio done handle_superio start, nsuperio 1 handle_superio Pass 2, check #0, s 0000cde0 s->super 0000e138 handle_superio: Pass 2, Superio w83627hf handle_superio port 0x2e, defaultport 0x2e handle_superio Using port 0x2e handle_superio Pass 2, done #0 handle_superio done Wrote linuxbios table at: 00000500 - 00000664 checksum 7535 Jumping to linuxbiosmain()...
Welcome to start32, the open sourced starter. This space will eventually hold more diagnostic information.
January 2000, James Hendricks, Dale Webster, and Ron Minnich. Version 0.1
LinuxBIOS-1.0.0 Thu Apr 24 06:42:06 IST 2003 starting... Ram1 Ram2 Ram3 Ram Enable 1 Ram Enable 2 Ram Enable 3 Ram Enable 4 Ram Enable 5 Ram4 Ram5 Ram6 Copying LinuxBIOS to ram. Jumping to LinuxBIOS.
***************log*********************************
Regards, Shubhangi