Stefan Reinauer stepan@openbios.org writes:
Hi,
on a 4cpu K8 system I get the following output before the system hangs..
Hmm. It looks like you have non-bootstrap cpus running through the code.
Usually it is this hunk of code that traps errors. if (!boot_cpu()) { stop_this_cpu();
Although I can see something very weird happening if you have BIST failure, on your secondary cpus. But that is quite unlikely.
Is the machine drunk or are CPU1-3 just running away?
It looks like the cpus are just running away :( Usually I would expect to interlaced characters form a message I recognize. But I don't recognize see anything I recognize here.
Eric
LinuxBIOS-1.1.7.0-fallback Tue Nov 2 20:34:14 CET 2004 starting... setting up resource map....done. Enabling routing table for node 00 done. Enabling SMP settings setup_remote_node: done Renaming current temporary node to 01 done. anabling routing table for node 01 dConlee. tRiennamgin g mcutrrrenrt emporary node to 02 done. Enabling routing table for node 02 dConle.e mRernaiminngg c urmretntr tre porary node to 03 done. Enabling routing table for node 03 dColnee.a iz04n ngod esm itnirtiral ed. coherent_ht_finalize done PCI_DEV=(0,0x18,0) 0xb4=00030000 bus=00 id =74501022 bus=00 id =74601022 PCI_DEV=(0,0x19,0) 0xd4=000a0400