On 18.12.2007 15:56, Carl-Daniel Hailfinger wrote:
Add support for reading the AMD/ATI RV630 graphics chipset flash ROM. Needs a board enable command line option (flashrom -m AMDATI:RV630) Works with RV630, but BAR addresses have to be fixed up. A timing issue causes all reads to be right-shifted by one bit, resulting in the loss of the LSB. For better debugging, I have to know the exact model of the flash chip and the frequency currently on the SCK connector of the flash chip.
Easiest way to debug would be to try this against a not POSTed card (secondary card) and then try it again when the card is POSTed. Compare the results (including status registers). Send them to the list.
Regards, Carl-Daniel