Author: yhlu Date: 2006-10-04 22:46:15 +0200 (Wed, 04 Oct 2006) New Revision: 2435
Added: trunk/LinuxBIOSv2/src/arch/i386/init/ldscript_apc.lb trunk/LinuxBIOSv2/src/arch/i386/init/ldscript_failover.lb trunk/LinuxBIOSv2/src/arch/i386/init/ldscript_fallback.lb trunk/LinuxBIOSv2/src/cpu/amd/socket_AM2/ trunk/LinuxBIOSv2/src/cpu/amd/socket_AM2/Config.lb trunk/LinuxBIOSv2/src/cpu/amd/socket_AM2/chip.h trunk/LinuxBIOSv2/src/cpu/amd/socket_AM2/socket_AM2.c trunk/LinuxBIOSv2/src/cpu/amd/socket_F/ trunk/LinuxBIOSv2/src/cpu/amd/socket_F/Config.lb trunk/LinuxBIOSv2/src/cpu/amd/socket_F/chip.h trunk/LinuxBIOSv2/src/cpu/amd/socket_F/socket_F.c trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/Config.lb trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/Options.lb trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/a trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/acpi_tables.c trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/apc_auto.c trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/c trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/cache_as_ram_auto.c trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/chip.h trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/cmos.layout trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8111.asl trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8111_isa.asl trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8111_pic.asl trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8131.asl trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8151.asl trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amdk8_util.asl trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/dsdt_lb.dsl trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/pci0_hc.asl trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/pci2.asl trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/pci2_hc.asl trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/superio.asl trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/fadt.c trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/irq_tables.c trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/mainboard.c trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/mb_sysconf.h trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/mptable.c trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/readme_acpi.txt trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/resourcemap.c trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8_f.h trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8_f_pci.c trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit_f.c trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit_f_dqs.c trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/spd_ddr2.h trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/ssdt.dsl trunk/LinuxBIOSv2/targets/amd/serengeti_cheetah/ trunk/LinuxBIOSv2/targets/amd/serengeti_cheetah/Config.lb trunk/LinuxBIOSv2/targets/amd/serengeti_cheetah/VERSION Modified: trunk/LinuxBIOSv2/src/arch/i386/Config.lb trunk/LinuxBIOSv2/src/arch/i386/boot/acpi.c trunk/LinuxBIOSv2/src/arch/i386/include/arch/acpi.h trunk/LinuxBIOSv2/src/arch/i386/include/arch/cpu.h trunk/LinuxBIOSv2/src/arch/i386/include/arch/romcc_io.h trunk/LinuxBIOSv2/src/arch/i386/init/ldscript.lb trunk/LinuxBIOSv2/src/arch/i386/lib/cpu.c trunk/LinuxBIOSv2/src/arch/i386/lib/pci_ops_conf1.c trunk/LinuxBIOSv2/src/arch/i386/lib/pci_ops_conf2.c trunk/LinuxBIOSv2/src/config/Config.lb trunk/LinuxBIOSv2/src/config/Options.lb trunk/LinuxBIOSv2/src/config/linuxbios_ram.ld trunk/LinuxBIOSv2/src/cpu/amd/car/cache_as_ram.inc trunk/LinuxBIOSv2/src/cpu/amd/car/copy_and_run.c trunk/LinuxBIOSv2/src/cpu/amd/car/post_cache_as_ram.c trunk/LinuxBIOSv2/src/cpu/amd/dualcore/amd_sibling.c trunk/LinuxBIOSv2/src/cpu/amd/dualcore/dualcore.c trunk/LinuxBIOSv2/src/cpu/amd/dualcore/dualcore_id.c trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/Config.lb trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/fidvid.c trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/init_cpus.c trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/model_fxx_init.c trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/model_fxx_update_microcode.c trunk/LinuxBIOSv2/src/cpu/amd/model_gx2/vsmsetup.c trunk/LinuxBIOSv2/src/cpu/amd/model_lx/vsmsetup.c trunk/LinuxBIOSv2/src/cpu/amd/mtrr/amd_earlymtrr.c trunk/LinuxBIOSv2/src/cpu/amd/mtrr/amd_mtrr.c trunk/LinuxBIOSv2/src/cpu/x86/car/copy_and_run.c trunk/LinuxBIOSv2/src/cpu/x86/lapic/lapic.c trunk/LinuxBIOSv2/src/cpu/x86/lapic/lapic_cpu_init.c trunk/LinuxBIOSv2/src/cpu/x86/mtrr/earlymtrr.c trunk/LinuxBIOSv2/src/cpu/x86/mtrr/mtrr.c trunk/LinuxBIOSv2/src/devices/device_util.c trunk/LinuxBIOSv2/src/devices/hypertransport.c trunk/LinuxBIOSv2/src/include/cpu/amd/microcode.h trunk/LinuxBIOSv2/src/include/cpu/amd/model_fxx_rev.h trunk/LinuxBIOSv2/src/include/cpu/x86/mem.h trunk/LinuxBIOSv2/src/include/device/device.h trunk/LinuxBIOSv2/src/include/device/hypertransport_def.h trunk/LinuxBIOSv2/src/include/device/pci.h trunk/LinuxBIOSv2/src/include/device/pci_def.h trunk/LinuxBIOSv2/src/lib/nrv2b.c trunk/LinuxBIOSv2/src/mainboard/Iwill/DK8HTX/auto.c trunk/LinuxBIOSv2/src/mainboard/Iwill/DK8S2/auto.c trunk/LinuxBIOSv2/src/mainboard/Iwill/DK8X/auto.c trunk/LinuxBIOSv2/src/mainboard/agami/aruma/Options.lb trunk/LinuxBIOSv2/src/mainboard/amd/serenade/auto.c trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_leopard/Config.lb trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_leopard/Options.lb trunk/LinuxBIOSv2/src/mainboard/arima/hdama/auto.c trunk/LinuxBIOSv2/src/mainboard/broadcom/blast/Options.lb trunk/LinuxBIOSv2/src/mainboard/ibm/e325/auto.c trunk/LinuxBIOSv2/src/mainboard/ibm/e326/auto.c trunk/LinuxBIOSv2/src/mainboard/newisys/khepri/auto.c trunk/LinuxBIOSv2/src/mainboard/sunw/ultra40/Options.lb trunk/LinuxBIOSv2/src/mainboard/tyan/s2850/Options.lb trunk/LinuxBIOSv2/src/mainboard/tyan/s2875/Options.lb trunk/LinuxBIOSv2/src/mainboard/tyan/s2880/Options.lb trunk/LinuxBIOSv2/src/mainboard/tyan/s2881/Options.lb trunk/LinuxBIOSv2/src/mainboard/tyan/s2882/Options.lb trunk/LinuxBIOSv2/src/mainboard/tyan/s2885/Options.lb trunk/LinuxBIOSv2/src/mainboard/tyan/s2891/Options.lb trunk/LinuxBIOSv2/src/mainboard/tyan/s2892/Options.lb trunk/LinuxBIOSv2/src/mainboard/tyan/s2895/Options.lb trunk/LinuxBIOSv2/src/mainboard/tyan/s4880/Options.lb trunk/LinuxBIOSv2/src/mainboard/tyan/s4882/Options.lb trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/Config.lb trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8.h trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8_acpi.c trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/coherent_ht.c trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/coherent_ht_car.c trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/get_sblk_pci1234.c trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/incoherent_ht.c trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/misc_control.c trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/northbridge.c trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit.c trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit.h trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/setup_resource_map.c trunk/LinuxBIOSv2/src/southbridge/amd/amd8111/amd8111_early_ctrl.c trunk/LinuxBIOSv2/src/southbridge/amd/amd8111/amd8111_enable_rom.c trunk/LinuxBIOSv2/src/southbridge/amd/amd8111/amd8111_reset.c trunk/LinuxBIOSv2/src/southbridge/broadcom/bcm5785/bcm5785_early_setup.c trunk/LinuxBIOSv2/src/southbridge/nvidia/ck804/ck804_early_setup.c trunk/LinuxBIOSv2/src/southbridge/nvidia/ck804/ck804_early_setup_car.c trunk/LinuxBIOSv2/src/stream/rom_stream.c Log: AMD Rev F support
Modified: trunk/LinuxBIOSv2/src/arch/i386/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/arch/i386/Config.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/arch/i386/Config.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -1,10 +1,26 @@ uses CONFIG_SMP uses CONFIG_PRECOMPRESSED_ROM_STREAM uses CONFIG_USE_INIT +uses HAVE_FAILOVER_BOOT +uses USE_FAILOVER_IMAGE +uses USE_FALLBACK_IMAGE
init init/crt0.S.lb -ldscript init/ldscript.lb
+if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + ldscript init/ldscript_failover.lb + else + ldscript init/ldscript.lb + end +else + if USE_FALLBACK_IMAGE + ldscript init/ldscript_fallback.lb + else + ldscript init/ldscript.lb + end +end + makerule all depends "linuxbios.rom" end @@ -21,7 +37,7 @@
makerule payload depends "$(PAYLOAD)" - action "cp -f $< $@" + action "cp $< $@" end
makerule payload.nrv2b @@ -53,9 +69,19 @@ makedefine PAYLOAD-1:=payload end
-makerule linuxbios.rom - depends "linuxbios.strip buildrom $(PAYLOAD-1)" - action "./buildrom $< $@ $(PAYLOAD-1) $(ROM_IMAGE_SIZE) $(ROM_SECTION_SIZE)" +if USE_FAILOVER_IMAGE + makedefine LINUXBIOS_APC:= + makedefine LINUXBIOS_RAM_ROM:= + + makerule linuxbios.rom + depends "linuxbios.strip" + action "cp $< $@" + end +else + makerule linuxbios.rom + depends "linuxbios.strip buildrom $(PAYLOAD-1)" + action "./buildrom $< $@ $(PAYLOAD-1) $(ROM_IMAGE_SIZE) $(ROM_SECTION_SIZE)" + end end
makerule crt0.S @@ -72,11 +98,11 @@ action "$(OBJCOPY) --rename-section .text=.init.text --rename-section .data=.init.data --rename-section .rodata=.init.rodata --rename-section .rodata.str1.1=.init.rodata.str1.1 init.pre.o init.o" end
- makerule linuxbios - depends "crt0.o init.o linuxbios_ram.rom ldscript.ld" + makerule linuxbios + depends "crt0.o $(INIT-OBJECTS) $(LINUXBIOS_APC) $(LINUXBIOS_RAM_ROM) ldscript.ld" action "$(CC) -nostdlib -nostartfiles -static -o $@ -T ldscript.ld crt0.o init.o" action "$(CROSS_COMPILE)nm -n linuxbios | sort > linuxbios.map" - end + end
end
Modified: trunk/LinuxBIOSv2/src/arch/i386/boot/acpi.c =================================================================== --- trunk/LinuxBIOSv2/src/arch/i386/boot/acpi.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/arch/i386/boot/acpi.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -203,6 +203,31 @@ header->checksum = acpi_checksum((void *)srat, header->length); }
+void acpi_create_slit(acpi_slit_t *slit) +{ + + acpi_header_t *header=&(slit->header); + unsigned long current=(unsigned long)slit+sizeof(acpi_slit_t); + + memset((void *)slit, 0, sizeof(acpi_slit_t)); + + /* fill out header fields */ + memcpy(header->signature, SLIT_NAME, 4); + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, SLIT_TABLE, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + + header->length = sizeof(acpi_slit_t); + header->revision = 1; + +// current = acpi_fill_slit(current); + + /* recalculate length */ + header->length= current - (unsigned long)slit; + + header->checksum = acpi_checksum((void *)slit, header->length); +} + void acpi_create_hpet(acpi_hpet_t *hpet) { #define HPET_ADDR 0xfed00000ULL
Modified: trunk/LinuxBIOSv2/src/arch/i386/include/arch/acpi.h =================================================================== --- trunk/LinuxBIOSv2/src/arch/i386/include/arch/acpi.h 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/arch/i386/include/arch/acpi.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -6,12 +6,9 @@ * * The ACPI table structs are based on the Linux kernel sources. * - * ACPI FADT & FACS added by Nick Barker nick.barker9@btinternet.com + */ +/* ACPI FADT & FACS added by Nick Barker nick.barker9@btinternet.com * those parts (C) 2004 Nick Barker - * - * ACPI SRAT support added in 2005.9 by yhlu - * Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. - * */
@@ -32,11 +29,13 @@ #define HPET_NAME "HPET" #define MADT_NAME "APIC" #define SRAT_NAME "SRAT" +#define SLIT_NAME "SLIT"
#define RSDT_TABLE "RSDT " #define HPET_TABLE "AMD64 " #define MADT_TABLE "MADT " #define SRAT_TABLE "SRAT " +#define SLIT_TABLE "SLIT "
#define OEM_ID "LXBIOS" #define ASLC "NONE" @@ -49,7 +48,7 @@ char oem_id[6]; /* OEM ID, "LXBIOS" */ u8 revision; /* 0 for APCI 1.0, 2 for ACPI 2.0 */ u32 rsdt_address; /* physical address of RSDT */ - u32 length; /* total length of RSDP (incl. extended part) */ + u32 length; /* total length of RSDP (including extended part) */ u64 xsdt_address; /* physical address of XSDT */ u8 ext_checksum; /* chechsum of whole table */ u8 reserved[3]; @@ -84,16 +83,15 @@ /* RSDT */ typedef struct acpi_rsdt { struct acpi_table_header header; - u32 entry[5+ACPI_SSDTX_NUM]; /* HPET, FADT, SRAT, MADT(APIC), SSDT, SSDTX */ + u32 entry[6+ACPI_SSDTX_NUM]; /* HPET, FADT, SRAT, SLIT, MADT(APIC), SSDT, SSDTX*/ } __attribute__ ((packed)) acpi_rsdt_t;
/* XSDT */ typedef struct acpi_xsdt { struct acpi_table_header header; - u64 entry[5+ACPI_SSDTX_NUM]; + u64 entry[6+ACPI_SSDTX_NUM]; } __attribute__ ((packed)) acpi_xsdt_t;
- /* HPET TIMERS */ typedef struct acpi_hpet { struct acpi_table_header header; @@ -138,6 +136,11 @@ u32 resv2[2]; } __attribute__ ((packed)) acpi_srat_mem_t;
+/* SLIT */ +typedef struct acpi_slit { + struct acpi_table_header header; + /* followed by static resource allocation 8+byte[num*num]*/ +} __attribute__ ((packed)) acpi_slit_t;
/* MADT */
Modified: trunk/LinuxBIOSv2/src/arch/i386/include/arch/cpu.h =================================================================== --- trunk/LinuxBIOSv2/src/arch/i386/include/arch/cpu.h 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/arch/i386/include/arch/cpu.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -141,6 +141,25 @@ return ci->index; }
+ +struct cpuinfo_x86 { + uint8_t x86; /* CPU family */ + uint8_t x86_vendor; /* CPU vendor */ + uint8_t x86_model; + uint8_t x86_mask; +}; + +static void inline get_fms(struct cpuinfo_x86 *c, uint32_t tfms) +{ + c->x86 = (tfms >> 8) & 0xf; + c->x86_model = (tfms >> 4) & 0xf; + c->x86_mask = tfms & 0xf; + if (c->x86 == 0xf) + c->x86 += (tfms >> 20) & 0xff; + if (c->x86 >= 0x6) + c->x86_model += ((tfms >> 16) & 0xF) << 4; + +} #endif
#endif /* ARCH_CPU_H */
Modified: trunk/LinuxBIOSv2/src/arch/i386/include/arch/romcc_io.h =================================================================== --- trunk/LinuxBIOSv2/src/arch/i386/include/arch/romcc_io.h 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/arch/i386/include/arch/romcc_io.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -4,75 +4,36 @@ #include <stdint.h>
-static inline uint8_t read8(unsigned long addr) +static inline __attribute__((always_inline)) uint8_t read8(unsigned long addr) { return *((volatile uint8_t *)(addr)); }
-static inline uint16_t read16(unsigned long addr) +static inline __attribute__((always_inline)) uint16_t read16(unsigned long addr) { return *((volatile uint16_t *)(addr)); }
-static inline uint32_t read32(unsigned long addr) +static inline __attribute__((always_inline)) uint32_t read32(unsigned long addr) { return *((volatile uint32_t *)(addr)); }
-static inline void write8(unsigned long addr, uint8_t value) +static inline __attribute__((always_inline)) void write8(unsigned long addr, uint8_t value) { *((volatile uint8_t *)(addr)) = value; }
-static inline void write16(unsigned long addr, uint16_t value) +static inline __attribute__((always_inline)) void write16(unsigned long addr, uint16_t value) { *((volatile uint16_t *)(addr)) = value; }
-static inline void write32(unsigned long addr, uint32_t value) +static inline __attribute__((always_inline)) void write32(unsigned long addr, uint32_t value) { *((volatile uint32_t *)(addr)) = value; } -#if 0 -typedef __builtin_div_t div_t; -typedef __builtin_ldiv_t ldiv_t; -typedef __builtin_udiv_t udiv_t; -typedef __builtin_uldiv_t uldiv_t;
-static inline div_t div(int numer, int denom) -{ - return __builtin_div(numer, denom); -} - -static inline ldiv_t ldiv(long numer, long denom) -{ - return __builtin_ldiv(numer, denom); -} - -static inline udiv_t udiv(unsigned numer, unsigned denom) -{ - return __builtin_udiv(numer, denom); -} - -static inline uldiv_t uldiv(unsigned long numer, unsigned long denom) -{ - return __builtin_uldiv(numer, denom); -} - - - -inline int log2(int value) -{ - /* __builtin_bsr is a exactly equivalent to the x86 machine - * instruction with the exception that it returns -1 - * when the value presented to it is zero. - * Otherwise __builtin_bsr returns the zero based index of - * the highest bit set. - */ - return __builtin_bsr(value); -} -#endif - static inline int log2(int value) { unsigned int r = 0; @@ -98,16 +59,16 @@
}
-#define PCI_ADDR(BUS, DEV, FN, WHERE) ( \ - (((BUS) & 0xFF) << 16) | \ - (((DEV) & 0x1f) << 11) | \ - (((FN) & 0x07) << 8) | \ - ((WHERE) & 0xFF)) +#define PCI_ADDR(SEGBUS, DEV, FN, WHERE) ( \ + (((SEGBUS) & 0xFFF) << 20) | \ + (((DEV) & 0x1F) << 15) | \ + (((FN) & 0x07) << 12) | \ + ((WHERE) & 0xFFF))
-#define PCI_DEV(BUS, DEV, FN) ( \ - (((BUS) & 0xFF) << 16) | \ - (((DEV) & 0x1f) << 11) | \ - (((FN) & 0x7) << 8)) +#define PCI_DEV(SEGBUS, DEV, FN) ( \ + (((SEGBUS) & 0xFFF) << 20) | \ + (((DEV) & 0x1F) << 15) | \ + (((FN) & 0x07) << 12))
#define PCI_ID(VENDOR_ID, DEVICE_ID) \ ((((DEVICE_ID) & 0xFFFF) << 16) | ((VENDOR_ID) & 0xFFFF)) @@ -117,58 +78,103 @@
typedef unsigned device_t;
-static inline __attribute__((always_inline)) uint8_t pci_read_config8(device_t dev, unsigned where) +static inline __attribute__((always_inline)) uint8_t pci_io_read_config8(device_t dev, unsigned where) { unsigned addr; - addr = dev | where; + addr = (dev>>4) | where; outl(0x80000000 | (addr & ~3), 0xCF8); return inb(0xCFC + (addr & 3)); }
-static inline __attribute__((always_inline)) uint16_t pci_read_config16(device_t dev, unsigned where) +static inline __attribute__((always_inline)) uint8_t pci_read_config8(device_t dev, unsigned where) { + return pci_io_read_config8(dev, where); +} + +static inline __attribute__((always_inline)) uint16_t pci_io_read_config16(device_t dev, unsigned where) +{ unsigned addr; - addr = dev | where; + addr = (dev>>4) | where; outl(0x80000000 | (addr & ~3), 0xCF8); return inw(0xCFC + (addr & 2)); }
-static inline __attribute__((always_inline)) uint32_t pci_read_config32(device_t dev, unsigned where) +static inline __attribute__((always_inline)) uint16_t pci_read_config16(device_t dev, unsigned where) { + return pci_io_read_config16(dev, where); +} + + +static inline __attribute__((always_inline)) uint32_t pci_io_read_config32(device_t dev, unsigned where) +{ unsigned addr; - addr = dev | where; + addr = (dev>>4) | where; outl(0x80000000 | (addr & ~3), 0xCF8); return inl(0xCFC); }
-static inline __attribute__((always_inline)) void pci_write_config8(device_t dev, unsigned where, uint8_t value) +static inline __attribute__((always_inline)) uint32_t pci_read_config32(device_t dev, unsigned where) { + return pci_io_read_config32(dev, where); +} + +static inline __attribute__((always_inline)) void pci_io_write_config8(device_t dev, unsigned where, uint8_t value) +{ unsigned addr; - addr = dev | where; + addr = (dev>>4) | where; outl(0x80000000 | (addr & ~3), 0xCF8); outb(value, 0xCFC + (addr & 3)); }
+static inline __attribute__((always_inline)) void pci_write_config8(device_t dev, unsigned where, uint8_t value) +{ + pci_io_write_config8(dev, where, value); +} + + +static inline __attribute__((always_inline)) void pci_io_write_config16(device_t dev, unsigned where, uint16_t value) +{ + unsigned addr; + addr = (dev>>4) | where; + outl(0x80000000 | (addr & ~3), 0xCF8); + outw(value, 0xCFC + (addr & 2)); +} + static inline __attribute__((always_inline)) void pci_write_config16(device_t dev, unsigned where, uint16_t value) { - unsigned addr; - addr = dev | where; - outl(0x80000000 | (addr & ~3), 0xCF8); - outw(value, 0xCFC + (addr & 2)); + pci_io_write_config16(dev, where, value); }
-static inline __attribute__((always_inline)) void pci_write_config32(device_t dev, unsigned where, uint32_t value) + +static inline __attribute__((always_inline)) void pci_io_write_config32(device_t dev, unsigned where, uint32_t value) { unsigned addr; - addr = dev | where; + addr = (dev>>4) | where; outl(0x80000000 | (addr & ~3), 0xCF8); outl(value, 0xCFC); }
+static inline __attribute__((always_inline)) void pci_write_config32(device_t dev, unsigned where, uint32_t value) +{ + pci_io_write_config32(dev, where, value); +} + #define PCI_DEV_INVALID (0xffffffffU) +static device_t pci_io_locate_device(unsigned pci_id, device_t dev) +{ + for(; dev <= PCI_DEV(255, 31, 7); dev += PCI_DEV(0,0,1)) { + unsigned int id; + id = pci_io_read_config32(dev, 0); + if (id == pci_id) { + return dev; + } + } + return PCI_DEV_INVALID; +} + static device_t pci_locate_device(unsigned pci_id, device_t dev) { - for(; dev <= PCI_DEV(CONFIG_MAX_PCI_BUSES, 31, 7); dev += PCI_DEV(0,0,1)) { + for(; dev <= PCI_DEV(255, 31, 7); dev += PCI_DEV(0,0,1)) { unsigned int id; id = pci_read_config32(dev, 0); if (id == pci_id) { @@ -180,11 +186,11 @@
static device_t pci_locate_device_on_bus(unsigned pci_id, unsigned bus) { - device_t dev, last; + device_t dev, last;
dev = PCI_DEV(bus, 0, 0); last = PCI_DEV(bus, 31, 7); - + for(; dev <=last; dev += PCI_DEV(0,0,1)) { unsigned int id; id = pci_read_config32(dev, 0); @@ -195,8 +201,6 @@ return PCI_DEV_INVALID; }
- - /* Generic functions for pnp devices */ static inline __attribute__((always_inline)) void pnp_write_config(device_t dev, uint8_t reg, uint8_t value) {
Modified: trunk/LinuxBIOSv2/src/arch/i386/init/ldscript.lb =================================================================== --- trunk/LinuxBIOSv2/src/arch/i386/init/ldscript.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/arch/i386/init/ldscript.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -36,16 +36,13 @@ SECTIONS { . = _ROMBASE; - + .ram . : { _ram = . ; linuxbios_ram.rom(*) _eram = . ; }
- _x = .; - . = (_x < (_ROMBASE - 0x10000 + ROM_IMAGE_SIZE)) ? (_ROMBASE - 0x10000 + ROM_IMAGE_SIZE) : _x; - /* This section might be better named .setup */ .rom . : { _rom = .;
Added: trunk/LinuxBIOSv2/src/arch/i386/init/ldscript_apc.lb =================================================================== --- trunk/LinuxBIOSv2/src/arch/i386/init/ldscript_apc.lb (rev 0) +++ trunk/LinuxBIOSv2/src/arch/i386/init/ldscript_apc.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,13 @@ +INPUT(linuxbios_apc.rom) +SECTIONS +{ + .apcrom . : { + _apcrom = .; + linuxbios_apc.rom(*) + _eapcrom = .; + } + _iseg_apc = DCACHE_RAM_BASE; + _eiseg_apc = _iseg_apc + SIZEOF(.apcrom); + _liseg_apc = _apcrom; + _eliseg_apc = _eapcrom; +}
Added: trunk/LinuxBIOSv2/src/arch/i386/init/ldscript_failover.lb =================================================================== --- trunk/LinuxBIOSv2/src/arch/i386/init/ldscript_failover.lb (rev 0) +++ trunk/LinuxBIOSv2/src/arch/i386/init/ldscript_failover.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,56 @@ +/* + * Memory map: + * + * _RAMBASE + * : data segment + * : bss segment + * : heap + * : stack + * _ROMBASE + * : linuxbios text + * : readonly text + */ +/* + * Bootstrap code for the STPC Consumer + * Copyright (c) 1999 by Net Insight AB. All Rights Reserved. + * + */ + +/* + * Written by Johan Rydberg, based on work by Daniel Kahlin. + * Rewritten by Eric Biederman + */ +/* + * We use ELF as output format. So that we can + * debug the code in some form. + */ +OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") +OUTPUT_ARCH(i386) + +/* +ENTRY(_start) +*/ + +TARGET(binary) +SECTIONS +{ + . = _ROMBASE; + + /* This section might be better named .setup */ + .rom . : { + _rom = .; + *(.rom.text); + *(.rom.data); + *(.rom.data.*); + . = ALIGN(16); + _erom = .; + } + + _lrom = LOADADDR(.rom); + _elrom = LOADADDR(.rom) + SIZEOF(.rom); + + /DISCARD/ : { + *(.comment) + *(.note) + } +}
Added: trunk/LinuxBIOSv2/src/arch/i386/init/ldscript_fallback.lb =================================================================== --- trunk/LinuxBIOSv2/src/arch/i386/init/ldscript_fallback.lb (rev 0) +++ trunk/LinuxBIOSv2/src/arch/i386/init/ldscript_fallback.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,71 @@ +/* + * Memory map: + * + * _RAMBASE + * : data segment + * : bss segment + * : heap + * : stack + * _ROMBASE + * : linuxbios text + * : readonly text + */ +/* + * Bootstrap code for the STPC Consumer + * Copyright (c) 1999 by Net Insight AB. All Rights Reserved. + * + */ + +/* + * Written by Johan Rydberg, based on work by Daniel Kahlin. + * Rewritten by Eric Biederman + */ +/* + * We use ELF as output format. So that we can + * debug the code in some form. + */ +OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") +OUTPUT_ARCH(i386) + +/* +ENTRY(_start) +*/ + +TARGET(binary) +INPUT(linuxbios_ram.rom) +SECTIONS +{ + . = _ROMBASE; + + .ram . : { + _ram = . ; + linuxbios_ram.rom(*) + _eram = . ; + } + + /* cut _start into last 64k*/ + _x = .; + . = (_x < (_ROMBASE - 0x10000 + ROM_IMAGE_SIZE)) ? (_ROMBASE - 0x10000 + ROM_IMAGE_SIZE) : _x; + + /* This section might be better named .setup */ + .rom . : { + _rom = .; + *(.rom.text); + *(.rom.data); + *(.rom.data.*); + . = ALIGN(16); + _erom = .; + } + + _lrom = LOADADDR(.rom); + _elrom = LOADADDR(.rom) + SIZEOF(.rom); + _iseg = _RAMBASE; + _eiseg = _iseg + SIZEOF(.ram); + _liseg = _ram; + _eliseg = _eram; + + /DISCARD/ : { + *(.comment) + *(.note) + } +}
Modified: trunk/LinuxBIOSv2/src/arch/i386/lib/cpu.c =================================================================== --- trunk/LinuxBIOSv2/src/arch/i386/lib/cpu.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/arch/i386/lib/cpu.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -222,6 +222,8 @@ */ struct device *cpu; struct cpu_info *info; + struct cpuinfo_x86 c; + info = cpu_info();
printk_notice("Initializing CPU #%d\n", info->index); @@ -245,6 +247,11 @@ identify_cpu(cpu); printk_debug("CPU: vendor %s device %x\n", cpu_vendor_name(cpu->vendor), cpu->device); + + get_fms(&c, cpu->device); + + printk_debug("CPU: family %02x, model %02x, stepping %02x\n", c.x86, c.x86_model, c.x86_mask); + /* Lookup the cpu's operations */ set_cpu_ops(cpu);
Modified: trunk/LinuxBIOSv2/src/arch/i386/lib/pci_ops_conf1.c =================================================================== --- trunk/LinuxBIOSv2/src/arch/i386/lib/pci_ops_conf1.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/arch/i386/lib/pci_ops_conf1.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -10,40 +10,40 @@
#define CONFIG_CMD(bus,devfn, where) (0x80000000 | (bus << 16) | (devfn << 8) | (where & ~3))
-static uint8_t pci_conf1_read_config8(struct bus *pbus, unsigned char bus, int devfn, int where) +static uint8_t pci_conf1_read_config8(struct bus *pbus, int bus, int devfn, int where) { - outl(CONFIG_CMD(bus, devfn, where), 0xCF8); - return inb(0xCFC + (where & 3)); + outl(CONFIG_CMD(bus, devfn, where), 0xCF8); + return inb(0xCFC + (where & 3)); }
-static uint16_t pci_conf1_read_config16(struct bus *pbus, unsigned char bus, int devfn, int where) +static uint16_t pci_conf1_read_config16(struct bus *pbus, int bus, int devfn, int where) { - outl(CONFIG_CMD(bus, devfn, where), 0xCF8); - return inw(0xCFC + (where & 2)); + outl(CONFIG_CMD(bus, devfn, where), 0xCF8); + return inw(0xCFC + (where & 2)); }
-static uint32_t pci_conf1_read_config32(struct bus *pbus, unsigned char bus, int devfn, int where) +static uint32_t pci_conf1_read_config32(struct bus *pbus, int bus, int devfn, int where) { - outl(CONFIG_CMD(bus, devfn, where), 0xCF8); - return inl(0xCFC); + outl(CONFIG_CMD(bus, devfn, where), 0xCF8); + return inl(0xCFC); }
-static void pci_conf1_write_config8(struct bus *pbus, unsigned char bus, int devfn, int where, uint8_t value) +static void pci_conf1_write_config8(struct bus *pbus, int bus, int devfn, int where, uint8_t value) { - outl(CONFIG_CMD(bus, devfn, where), 0xCF8); - outb(value, 0xCFC + (where & 3)); + outl(CONFIG_CMD(bus, devfn, where), 0xCF8); + outb(value, 0xCFC + (where & 3)); }
-static void pci_conf1_write_config16(struct bus *pbus, unsigned char bus, int devfn, int where, uint16_t value) +static void pci_conf1_write_config16(struct bus *pbus, int bus, int devfn, int where, uint16_t value) { - outl(CONFIG_CMD(bus, devfn, where), 0xCF8); - outw(value, 0xCFC + (where & 2)); + outl(CONFIG_CMD(bus, devfn, where), 0xCF8); + outw(value, 0xCFC + (where & 2)); }
-static void pci_conf1_write_config32(struct bus *pbus, unsigned char bus, int devfn, int where, uint32_t value) +static void pci_conf1_write_config32(struct bus *pbus, int bus, int devfn, int where, uint32_t value) { - outl(CONFIG_CMD(bus, devfn, where), 0xCF8); - outl(value, 0xCFC); + outl(CONFIG_CMD(bus, devfn, where), 0xCF8); + outl(value, 0xCFC); }
#undef CONFIG_CMD
Modified: trunk/LinuxBIOSv2/src/arch/i386/lib/pci_ops_conf2.c =================================================================== --- trunk/LinuxBIOSv2/src/arch/i386/lib/pci_ops_conf2.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/arch/i386/lib/pci_ops_conf2.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -12,7 +12,7 @@ #define FUNC(devfn) (((devfn & 7) << 1) | 0xf0) #define SET(bus,devfn) outb(FUNC(devfn), 0xCF8); outb(bus, 0xCFA);
-static uint8_t pci_conf2_read_config8(struct bus *pbus, unsigned char bus, int devfn, int where) +static uint8_t pci_conf2_read_config8(struct bus *pbus, int bus, int devfn, int where) { uint8_t value; SET(bus, devfn); @@ -21,7 +21,7 @@ return value; }
-static uint16_t pci_conf2_read_config16(struct bus *pbus, unsigned char bus, int devfn, int where) +static uint16_t pci_conf2_read_config16(struct bus *pbus, int bus, int devfn, int where) { uint16_t value; SET(bus, devfn); @@ -30,7 +30,7 @@ return value; }
-static uint32_t pci_conf2_read_config32(struct bus *pbus, unsigned char bus, int devfn, int where) +static uint32_t pci_conf2_read_config32(struct bus *pbus, int bus, int devfn, int where) { uint32_t value; SET(bus, devfn); @@ -39,21 +39,21 @@ return value; }
-static void pci_conf2_write_config8(struct bus *pbus, unsigned char bus, int devfn, int where, uint8_t value) +static void pci_conf2_write_config8(struct bus *pbus, int bus, int devfn, int where, uint8_t value) { SET(bus, devfn); outb(value, IOADDR(devfn, where)); outb(0, 0xCF8); }
-static void pci_conf2_write_config16(struct bus *pbus, unsigned char bus, int devfn, int where, uint16_t value) +static void pci_conf2_write_config16(struct bus *pbus, int bus, int devfn, int where, uint16_t value) { SET(bus, devfn); outw(value, IOADDR(devfn, where)); outb(0, 0xCF8); }
-static void pci_conf2_write_config32(struct bus *pbus, unsigned char bus, int devfn, int where, uint32_t value) +static void pci_conf2_write_config32(struct bus *pbus, int bus, int devfn, int where, uint32_t value) { SET(bus, devfn); outl(value, IOADDR(devfn, where));
Modified: trunk/LinuxBIOSv2/src/config/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/config/Config.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/config/Config.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -1,6 +1,7 @@ ## This is Architecture independant part of the makefile
uses HAVE_OPTION_TABLE +uses CONFIG_AP_CODE_IN_CAR
makedefine CPP:= $(CC) -x assembler-with-cpp -DASSEMBLY -E makedefine LIBGCC_FILE_NAME := $(shell $(CC) -print-libgcc-file-name) @@ -31,6 +32,12 @@ action "$(OBJCOPY) -O binary linuxbios linuxbios.strip" end
+makerule linuxbios.a + depends "$(OBJECTS)" + action "rm -f linuxbios.a" + action "ar cr linuxbios.a $(OBJECTS)" +end + makerule linuxbios_ram.o depends "$(DRIVER) linuxbios.a $(LIBGCC_FILE_NAME)" action "$(CC) -nostdlib -r -o $@ c_start.o $(DRIVER) linuxbios.a $(LIBGCC_FILE_NAME)" @@ -63,18 +70,61 @@ action "cp $(LINUXBIOS_RAM-1) linuxbios_ram.rom" end
+makedefine LINUXBIOS_APC:= + +if CONFIG_AP_CODE_IN_CAR + #for ap code in cache + + makerule linuxbios_apc.a + depends "apc_auto.o" + action "rm -f linuxbios_apc.a" + action "ar cr linuxbios_apc.a apc_auto.o" + end + + makerule linuxbios_apc.o + depends "linuxbios_apc.a c_start.o $(LIBGCC_FILE_NAME)" + action "$(CC) -nostdlib -r -o $@ c_start.o linuxbios_apc.a $(LIBGCC_FILE_NAME)" + end + + makerule linuxbios_apc + depends "linuxbios_apc.o $(TOP)/src/config/linuxbios_apc.ld ldoptions" + action "$(CC) -nostdlib -nostartfiles -static -o $@ -T $(TOP)/src/config/linuxbios_apc.ld linuxbios_apc.o" + action "$(CROSS_COMPILE)nm -n linuxbios_apc | sort > linuxbios_apc.map" + end + + ## + ## By default compress the part of linuxbios that runs from cache as ram + ## + makedefine LINUXBIOS_APC-$(CONFIG_COMPRESS):=linuxbios_apc.nrv2b + makedefine LINUXBIOS_APC-$(CONFIG_UNCOMPRESSED):=linuxbios_apc.bin + + makerule linuxbios_apc.bin + depends "linuxbios_apc" + action "$(OBJCOPY) -O binary $< $@" + end + + makerule linuxbios_apc.nrv2b + depends "linuxbios_apc.bin nrv2b" + action "./nrv2b e $< $@" + end + + makerule linuxbios_apc.rom + depends "$(LINUXBIOS_APC-1)" + action "cp $(LINUXBIOS_APC-1) linuxbios_apc.rom" + end + + makedefine LINUXBIOS_APC:=linuxbios_apc.rom + +end + +makedefine LINUXBIOS_RAM_ROM:=linuxbios_ram.rom + makerule linuxbios - depends "crt0.o $(INIT-OBJECTS) linuxbios_ram.rom ldscript.ld" + depends "crt0.o $(INIT-OBJECTS) $(LINUXBIOS_APC) $(LINUXBIOS_RAM_ROM) ldscript.ld" action "$(CC) -nostdlib -nostartfiles -static -o $@ -T ldscript.ld crt0.o $(INIT-OBJECTS)" action "$(CROSS_COMPILE)nm -n linuxbios | sort > linuxbios.map" end
-makerule linuxbios.a - depends "$(OBJECTS)" - action "rm -f linuxbios.a" - action "ar cr linuxbios.a $(OBJECTS)" -end - #makerule crt0.S # depends "$(CRT0)" # action "cp $< $@" @@ -159,7 +209,7 @@ action "rm -f ldscript.ld" action "rm -f a.out *.s *.l *.o *.E *.inc" action "rm -f TAGS tags romcc*" - action "rm -f docipl buildrom* chips.c *chip.c linuxbios_ram* linuxbios_pay*" + action "rm -f docipl buildrom* chips.c *chip.c linuxbios_apc* linuxbios_ram* linuxbios_pay*" action "rm -f build_opt_tbl* nrv2b* option_table.c crt0.S" end
Modified: trunk/LinuxBIOSv2/src/config/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/config/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/config/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -178,18 +178,36 @@ export always comment "Set if fallback booting required" end +define HAVE_FAILOVER_BOOT + format "%d" + default 0 + export always + comment "Set if failover booting required" +end define USE_FALLBACK_IMAGE format "%d" default 0 export used comment "Set to build a fallback image" end +define USE_FAILOVER_IMAGE + format "%d" + default 0 + export used + comment "Set to build a failover image" +end define FALLBACK_SIZE default 65536 format "0x%x" export used comment "Default fallback image size" end +define FAILOVER_SIZE + default 0 + format "0x%x" + export used + comment "Default failover image size" +end define ROM_SIZE default none format "0x%x" @@ -274,9 +292,9 @@ comment "Use data cache as temporary RAM if possible" end define DCACHE_RAM_BASE - default none + default 0xc0000 format "0x%x" - export used + export always comment "Base address of data cache when using it for temporary RAM" end define DCACHE_RAM_SIZE @@ -291,6 +309,21 @@ export always comment "Size of region that for global variable of cache as ram stage" end +define CONFIG_AP_CODE_IN_CAR + default 0 + export always + comment "will copy linuxbios_apc to AP cache ane execute in AP" +end +define MEM_TRAIN_SEQ + default 0 + export always + comment "0: three for in bsp, 1: on every core0, 2: one for on bsp" +end +define WAIT_BEFORE_CPUS_INIT + default 0 + export always + comment "execute cpus_ready_for_init if it is set to 1" +end define XIP_ROM_BASE default 0 format "0x%x" @@ -853,7 +886,7 @@ define HT_CHAIN_UNITID_BASE default 1 export always - comment "first hypertransport device's unitid base. if southbridge ht chain only has one ht device, it could be 0" + comment "this will be first hypertransport device's unitid base, if sb ht chain only has one ht device, it could be 0" end
define HT_CHAIN_END_UNITID_BASE @@ -868,30 +901,67 @@ comment "this will decided if only offset SB hypertransport chain" end
-define K8_SB_HT_CHAIN_ON_BUS0 +define SB_HT_CHAIN_ON_BUS0 default 0 export always - comment "this will make SB hypertransport chain sit on bus 0, if it is 2 will put other chain on 0x40, 0x80, 0xc0" + comment "this will make SB hypertransport chain sit on bus 0, if it is 1, will put sb ht chain on bus 0, if it is 2 will put other chain on 0x40, 0x80, 0xc0" end
-define K8_HW_MEM_HOLE_SIZEK +define HW_MEM_HOLE_SIZEK default 0 export always comment "Opteron E0 later memory hole size in K, 0 mean disable" end
-define K8_HW_MEM_HOLE_SIZE_AUTO_INC +define HW_MEM_HOLE_SIZE_AUTO_INC default 0 export always comment "Opteron E0 later memory hole size auto increase to avoid hole startk equal to basek" end
define K8_HT_FREQ_1G_SUPPORT - default 0 + default 0 export always comment "Optern E0 later could support 1G HT, but still depends MB design" end
+define K8_REV_F_SUPPORT + default 0 + export always + comment "Opteron Rev F (DDR2) support" +end + +define CBB + default 0 + export always + comment "Opteron cpu bus num base" +end + +define CDB + default 0x18 + export always + comment "Opteron cpu device num base" +end + +define DIMM_SUPPORT + default 0x0108 + format "0x%x" + export always + comment "DIMM support: bit 0 - sdram, bit 1: ddr1, bit 2: ddr2, bit 3: ddr3, bit 4: fbdimm, bit 8: reg" +end + +define CPU_SOCKET_TYPE + default 0x10 + export always + comment "cpu socket type, 0x10 mean Socket F, 0x11 mean socket M2, 0x20, Soxket G, and 0x21 mean socket M3" +end + +define CPU_ADDR_BITS + default 36 + export always + comment "CPU hardware address lines num, for AMD K8 could be 40, and GH could be 48" +end + define CONFIG_PCI_ROM_RUN default 0 export always
Modified: trunk/LinuxBIOSv2/src/config/linuxbios_ram.ld =================================================================== --- trunk/LinuxBIOSv2/src/config/linuxbios_ram.ld 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/config/linuxbios_ram.ld 2006-10-04 20:46:15 UTC (rev 2435) @@ -109,7 +109,7 @@ _ram_seg = _text; _eram_seg = _eheap;
- _bogus = ASSERT( ((_eram_seg>>10)<CONFIG_LB_MEM_TOPK) , "please increase CONFIG_LB_MEM_TOPK"); + _bogus = ASSERT( ( (_eram_seg>>10) < (CONFIG_LB_MEM_TOPK)) , "please increase CONFIG_LB_MEM_TOPK");
_bogus = ASSERT( !((CONFIG_CONSOLE_VGA || CONFIG_PCI_ROM_RUN) && ((_ram_seg<0xa0000) && (_eram_seg>0xa0000))) , "please increase CONFIG_LB_MEM_TOPK and if still fail, try to set _RAMBASE more than 1M");
Modified: trunk/LinuxBIOSv2/src/cpu/amd/car/cache_as_ram.inc =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/car/cache_as_ram.inc 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/amd/car/cache_as_ram.inc 2006-10-04 20:46:15 UTC (rev 2435) @@ -17,7 +17,7 @@ cache_as_ram_setup:
/* hope we can skip the double set for normal part */ -#if USE_FALLBACK_IMAGE == 1 +#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE==1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE==1)) /* check if cpu_init_detected */ movl $MTRRdefType_MSR, %ecx rdmsr @@ -56,16 +56,32 @@ wrmsr movl $0x269, %ecx wrmsr -#else +#endif
- #if CacheSize == 0x8000 +#if CacheSize == 0xc000 + /* enable caching for 16K using fixed mtrr */ + movl $0x268, %ecx /* fix4k_c4000*/ + movl $0x06060606, %edx /* WB IO type */ + xorl %eax, %eax + wrmsr /* enable caching for 32K using fixed mtrr */ movl $0x269, %ecx /* fix4k_c8000*/ movl $0x06060606, %eax /* WB IO type */ + movl %eax, %edx + wrmsr + +#endif + + +#if CacheSize == 0x8000 + /* enable caching for 32K using fixed mtrr */ + movl $0x269, %ecx /* fix4k_c8000*/ + movl $0x06060606, %eax /* WB IO type */ movl %eax, %edx wrmsr - #else +#endif
+#if CacheSize < 0x8000 /* enable caching for 16K/8K/4K using fixed mtrr */ movl $0x269, %ecx /* fix4k_cc000*/ #if CacheSize == 0x4000 @@ -79,8 +95,6 @@ #endif xorl %eax, %eax wrmsr - #endif - #endif
/* enable memory access for first MBs using top_mem */ @@ -88,9 +102,10 @@ xorl %edx, %edx movl $(((CONFIG_LB_MEM_TOPK << 10) + TOP_MEM_MASK) & ~TOP_MEM_MASK) , %eax wrmsr -#endif /* USE_FALLBACK_IMAGE == 1*/ +#endif /* USE_FAILOVER_IMAGE == 1*/
-#if USE_FALLBACK_IMAGE == 0 + +#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 0)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE==0)) /* disable cache */ movl %cr0, %eax orl $(0x1<<30),%eax @@ -108,12 +123,12 @@ wrmsr
movl $0x203, %ecx - movl $0x0000000f, %edx /* AMD 40 bit */ + movl $((1<<(CPU_ADDR_BITS-32))-1), %edx /* AMD 40 bit */ movl $(~(XIP_ROM_SIZE - 1) | 0x800), %eax wrmsr #endif /* XIP_ROM_SIZE && XIP_ROM_BASE */
-#if USE_FALLBACK_IMAGE == 1 +#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE==1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE==1)) /* Set the default memory type and enable fixed and variable MTRRs */ movl $MTRRdefType_MSR, %ecx xorl %edx, %edx @@ -133,23 +148,25 @@ andl $0x9fffffff,%eax movl %eax, %cr0
-#if USE_FALLBACK_IMAGE == 1 +#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE==1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE==1))
/* Read the range with lodsl*/ cld movl $CacheBase, %esi movl $(CacheSize>>2), %ecx - rep lodsl + rep + lodsl /* Clear the range */ movl $CacheBase, %edi movl $(CacheSize>>2), %ecx xorl %eax, %eax - rep stosl + rep + stosl
-#endif /*USE_FALLBACK_IMAGE == 1*/ +#endif /*USE_FAILOVER_IMAGE == 1*/
/* set up the stack pointer */ - movl $(CacheBase+CacheSize - 4 - GlobalVarSize), %eax + movl $(CacheBase+CacheSize - GlobalVarSize), %eax movl %eax, %esp
/* Restore the BIST result */
Modified: trunk/LinuxBIOSv2/src/cpu/amd/car/copy_and_run.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/car/copy_and_run.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/amd/car/copy_and_run.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -2,7 +2,6 @@ moved from nrv2v.c and some lines from crt0.S 2006/05/02 - stepan: move nrv2b to an extra file. */ - static inline void print_debug_cp_run(const char *strval, uint32_t val) { #if CONFIG_USE_INIT @@ -46,8 +45,13 @@ print_debug_cp_run("src=",(uint32_t)src); print_debug_cp_run("dst=",(uint32_t)dst);
- olen = unrv2b(src, dst); +// dump_mem(src, src+0x100); + + olen = unrv2b(src, dst, &ilen); + print_debug_cp_run("linxbios_ram.nrv2b length = ", ilen); + #endif +// dump_mem(dst, dst+0x100);
print_debug_cp_run("linxbios_ram.bin length = ", olen);
@@ -61,3 +65,55 @@ );
} + +#if CONFIG_AP_CODE_IN_CAR == 1 + +static void copy_and_run_ap_code_in_car(unsigned ret_addr) +{ + uint8_t *src, *dst; + unsigned long ilen, olen; + +// print_debug("Copying LinuxBIOS AP code to CAR.\r\n"); + +#if !CONFIG_COMPRESS + __asm__ volatile ( + "leal _liseg_apc, %0\n\t" + "leal _iseg_apc, %1\n\t" + "leal _eiseg_apc, %2\n\t" + "subl %1, %2\n\t" + : "=a" (src), "=b" (dst), "=c" (olen) + ); + memcpy(dst, src, olen); +#else + + __asm__ volatile ( + "leal _liseg_apc, %0\n\t" + "leal _iseg_apc, %1\n\t" + : "=a" (src) , "=b" (dst) + ); + +// print_debug_cp_run("src=",(uint32_t)src); +// print_debug_cp_run("dst=",(uint32_t)dst); + +// dump_mem(src, src+0x100); + + olen = unrv2b(src, dst, &ilen); +// print_debug_cp_run("linxbios_apc.nrv2b length = ", ilen); + +#endif +// dump_mem(dst, dst+0x100); + +// print_debug_cp_run("linxbios_apc.bin length = ", olen); + +// print_debug("Jumping to LinuxBIOS AP code in CAR.\r\n"); + + __asm__ volatile ( + "movl %0, %%ebp\n\t" /* cpu_reset for hardwaremain dummy */ + "cli\n\t" + "leal _iseg_apc, %%edi\n\t" + "jmp *%%edi\n\t" + :: "a"(ret_addr) + ); + +} +#endif
Modified: trunk/LinuxBIOSv2/src/cpu/amd/car/post_cache_as_ram.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/car/post_cache_as_ram.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/amd/car/post_cache_as_ram.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -18,12 +18,13 @@ { __asm__ volatile( "cld\n\t" - "rep movsl\n\t" + "rep; movsl\n\t" : /* No outputs */ : "S" (src), "D" (dest), "c" ((bytes)>>2) ); }
+ static void post_cache_as_ram(void) {
@@ -49,24 +50,34 @@ #error "You need to set CONFIG_LB_MEM_TOPK greater than 1024" #endif - set_init_ram_access(); + set_init_ram_access(); /* So we can access RAM from [1M, CONFIG_LB_MEM_TOPK) */
+// dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x8000, DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x7c00); print_debug("Copying data from cache to ram -- switching to use ram as stack... ");
/* from here don't store more data in CAR */ +#if 0 __asm__ volatile ( "pushl %eax\n\t" ); - memcopy((CONFIG_LB_MEM_TOPK<<10)-DCACHE_RAM_SIZE, DCACHE_RAM_BASE, DCACHE_RAM_SIZE); //inline +#endif + + memcopy((void *)((CONFIG_LB_MEM_TOPK<<10)-DCACHE_RAM_SIZE), (void *)DCACHE_RAM_BASE, DCACHE_RAM_SIZE); //inline +// dump_mem((CONFIG_LB_MEM_TOPK<<10) - 0x8000, (CONFIG_LB_MEM_TOPK<<10) - 0x7c00); + __asm__ volatile ( /* set new esp */ /* before _RAMBASE */ "subl %0, %%ebp\n\t" "subl %0, %%esp\n\t" ::"a"( (DCACHE_RAM_BASE + DCACHE_RAM_SIZE)- (CONFIG_LB_MEM_TOPK<<10) ) ); // We need to push %eax to the stack (CAR) before copy stack and pop it later after copy stack and change esp +#if 0 __asm__ volatile ( "popl %eax\n\t" ); +#endif + + /* We can put data to stack again */
/* only global variable sysinfo in cache need to be offset */ @@ -77,14 +88,27 @@ disable_cache_as_ram_bsp();
print_debug("Clearing initial memory region: "); - clear_init_ram(); //except the range from [(CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_SIZE, (CONFIG_LB_MEM_TOPK<<10)), that is used as stack in ram + clear_init_ram(); //except the range from [(CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_SIZE, (CONFIG_LB_MEM_TOPK<<10)) print_debug("Done\r\n");
+// dump_mem((CONFIG_LB_MEM_TOPK<<10) - 0x8000, (CONFIG_LB_MEM_TOPK<<10) - 0x7c00); + +#ifndef MEM_TRAIN_SEQ +#define MEM_TRAIN_SEQ 0 +#endif + set_sysinfo_in_ram(1); // So other core0 could start to train mem + +#if MEM_TRAIN_SEQ == 1 +// struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); + + // wait for ap memory to trained +// wait_all_core0_mem_trained(sysinfox); // moved to lapic_init_cpus.c +#endif /*copy and execute linuxbios_ram */ copy_and_run(); /* We will not return */
- print_debug("should not be here -\r\n"); + print_debug("should not be here -\r\n");
}
Modified: trunk/LinuxBIOSv2/src/cpu/amd/dualcore/amd_sibling.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/dualcore/amd_sibling.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/amd/dualcore/amd_sibling.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -11,6 +11,7 @@ #include <cpu/x86/mtrr.h> #include <cpu/amd/model_fxx_msr.h> #include <cpu/amd/model_fxx_rev.h> +#include <cpu/amd/amdk8_sysconf.h>
static int first_time = 1; static int disable_siblings = !CONFIG_LOGICAL_CPUS; @@ -168,7 +169,16 @@ /* Build the cpu device path */ cpu_path.type = DEVICE_PATH_APIC; cpu_path.u.apic.apic_id = cpu->path.u.apic.apic_id + i * (nb_cfg_54?1:8); + if(id.nodeid == 0) { + // need some special processing, because may the bsp is not lifted, but the core1 is lifted + //defined in northbridge.c + if(sysconf.enabled_apic_ext_id && (!sysconf.lift_bsp_apicid)) { + cpu->path.u.apic.apic_id += sysconf.apicid_offset; + }
+ } + + /* See if I can find the cpu */ new = find_dev_path(cpu->bus, &cpu_path); /* Allocate the new cpu device structure */
Modified: trunk/LinuxBIOSv2/src/cpu/amd/dualcore/dualcore.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/dualcore/dualcore.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/amd/dualcore/dualcore.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -19,7 +19,9 @@ #if SET_NB_CFG_54 == 1 static inline uint8_t set_apicid_cpuid_lo(void) { +#if K8_REV_F_SUPPORT == 0 if(is_cpu_pre_e0()) return 0; // pre_e0 can not be set +#endif
// set the NB_CFG[54]=1; why the OS will be happy with that ??? msr_t msr;
Modified: trunk/LinuxBIOSv2/src/cpu/amd/dualcore/dualcore_id.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/dualcore/dualcore_id.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/amd/dualcore/dualcore_id.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -20,6 +20,8 @@ }
//called by amd_siblings too +#define CORE_ID_BIT 1 +#define NODE_ID_BIT 3 struct node_core_id get_node_core_id(unsigned nb_cfg_54) { struct node_core_id id; @@ -27,15 +29,15 @@ if( nb_cfg_54) { // when NB_CFG[54] is set, nodeid = ebx[27:25], coreid = ebx[24] id.coreid = (cpuid_ebx(1) >> 24) & 0xf; - id.nodeid = (id.coreid>>1); - id.coreid &= 1; + id.nodeid = (id.coreid>>CORE_ID_BIT); + id.coreid &= ((1<<CORE_ID_BIT)-1); } else { // when NB_CFG[54] is clear, nodeid = ebx[26:24], coreid = ebx[27] id.nodeid = (cpuid_ebx(1) >> 24) & 0xf; - id.coreid = (id.nodeid>>3); - id.nodeid &= 7; + id.coreid = (id.nodeid>>NODE_ID_BIT); + id.nodeid &= ((1<<NODE_ID_BIT)-1); } return id; }
Modified: trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/Config.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/Config.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -1,7 +1,10 @@ uses HAVE_INIT_TIMER uses HAVE_MOVNTI +uses CPU_ADDR_BITS + default HAVE_INIT_TIMER=1 default HAVE_MOVNTI=1 +default CPU_ADDR_BITS=40 dir /cpu/x86/tsc dir /cpu/x86/fpu dir /cpu/x86/mmx
Modified: trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/fidvid.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/fidvid.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/fidvid.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -4,6 +4,12 @@
#define K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST 1
+#ifndef SB_VFSMAF +#define SB_VFSMAF 1 +#endif + +#define FX_SUPPORT 1 + static inline void print_debug_fv(const char *str, unsigned val) { #if K8_SET_FIDVID_DEBUG == 1 @@ -59,7 +65,7 @@ dword |= (1<<14);// disable the DRAM interface at first, it will be enabled by raminit again pci_write_config32(PCI_DEV(0, 0x18+i, 2), 0x94, dword);
- dword = 0x23070000; //enable FID/VID change + dword = 0x23070700; //enable FID/VID change // dword = 0x00070000; //enable FID/VID change pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0x80, dword);
@@ -122,13 +128,27 @@ if((vid_cur==vid) && (fid_cur==fid)) return fidvid;
vid_max = (msr.hi>>(48-32)) & 0x3f; - fid_max = (msr.lo>>16) & 0x3f; + fid_max = ((msr.lo>>16) & 0x3f); //max fid +#if FX_SUPPORT + if(fid_max>=((25-4)*2)) { // FX max fid is 5G + fid_max = ((msr.lo>>8) & 0x3f) + 5*2; // max FID is min fid + 1G + if(fid_max >= ((25-4)*2)) { + fid_max = (10-4)*2; // hard set to 2G + } + } +#endif
//set vid to max msr.hi = 1; msr.lo = (vid_max<<8) | (fid_cur); +#if SB_VFSMAF == 1 msr.lo |= (1<<16); // init changes +#endif wrmsr(0xc0010041, msr); +#if SB_VFSMAF == 0 + ldtstop_sb(); +#endif +
for(loop=0;loop<100000;loop++){ msr = rdmsr(0xc0010042); @@ -159,8 +179,13 @@ //set target fid msr.hi = (100000/5); msr.lo = (vid_cur<<8) | fid_cur; +#if SB_VFSMAF == 1 msr.lo |= (1<<16); // init changes +#endif wrmsr(0xc0010041, msr); +#if SB_VFSMAF == 0 + ldtstop_sb(); +#endif
#if K8_SET_FIDVID_DEBUG == 1 @@ -186,8 +211,13 @@ //set vid to final msr.hi = 1; msr.lo = (vid<<8) | (fid_cur); +#if SB_VFSMAF == 1 msr.lo |= (1<<16); // init changes +#endif wrmsr(0xc0010041, msr); +#if SB_VFSMAF == 0 + ldtstop_sb(); +#endif
for(loop=0;loop<100000;loop++){ msr = rdmsr(0xc0010042); @@ -215,10 +245,21 @@ msr_t msr; uint32_t vid_cur; uint32_t fid_cur; + uint32_t fid_max; int loop;
msr = rdmsr(0xc0010042); - send = ((msr.lo>>16) & 0x3f) << 8; //max fid + fid_max = ((msr.lo>>16) & 0x3f); //max fid +#if FX_SUPPORT + if(fid_max>=((25-4)*2)) { // FX max fid is 5G + fid_max = ((msr.lo>>8) & 0x3f) + 5*2; // max FID is min fid + 1G + if(fid_max >= ((25-4)*2)) { + fid_max = (10-4)*2; // hard set to 2G + } + } +#endif + send = fid_max<<8; + send |= ((msr.hi>>(48-32)) & 0x3f) << 16; //max vid send |= (apicid<<24); // ap apicid
@@ -342,6 +383,14 @@ msr_t msr; msr = rdmsr(0xc0010042); fid_max = ((msr.lo>>16) & 0x3f); //max fid +#if FX_SUPPORT == 1 + if(fid_max>=((25-4)*2)) { // FX max fid is 5G + fid_max = ((msr.lo>>8) & 0x3f) + 5*2; // max FID is min fid + 1G + if(fid_max >= ((25-4)*2)) { + fid_max = (10-4)*2; // hard set to 2G + } + } +#endif vid_max = ((msr.hi>>(48-32)) & 0x3f); //max vid fv.common_fidvid = (fid_max<<8)|(vid_max<<16);
@@ -366,6 +415,29 @@ #endif
+#if 0 + unsigned fid, vid; + // Can we use max only? So we can only set fid in one around, otherwise we need to set that to max after raminit + // set fid vid to DQS training required + fid = (fv.common_fidvid >> 8) & 0x3f; + vid = (fv.common_fidvid >> 16) & 0x3f; + + if(fid>(10-4)*2) { + fid = (10-4)*2; //x10 + } + + if(vid>=0x1f) { + vid+= 4; //unit is 12.5mV + } else { + vid+= 2; //unit is 25mV + } + + fv.common_fidvid = (fid<<8) | (vid<<16); + + print_debug_fv("common_fidvid=", fv.common_fidvid); + +#endif + // set BSP fid and vid print_debug_fv("bsp apicid=", bsp_apicid); fv.common_fidvid = set_fidvid(bsp_apicid, fv.common_fidvid, 1);
Modified: trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/init_cpus.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/init_cpus.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/init_cpus.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -1,6 +1,12 @@ //it takes the ENABLE_APIC_EXT_ID and APIC_ID_OFFSET and LIFT_BSP_APIC_ID #ifndef K8_SET_FIDVID - #define K8_SET_FIDVID 0 + #if K8_REV_F_SUPPORT == 0 + #define K8_SET_FIDVID 0 + #else + // for rev F, need to set FID to max + #define K8_SET_FIDVID 1 + #endif + #endif
#ifndef K8_SET_FIDVID_CORE0_ONLY @@ -8,6 +14,43 @@ #define K8_SET_FIDVID_CORE0_ONLY 1 #endif
+static inline void print_initcpu8 (const char *strval, unsigned val) +{ +#if CONFIG_USE_INIT + printk_debug("%s%02x\r\n", strval, val); +#else + print_debug(strval); print_debug_hex8(val); print_debug("\r\n"); +#endif +} + +static inline void print_initcpu8_nocr (const char *strval, unsigned val) +{ +#if CONFIG_USE_INIT + printk_debug("%s%02x", strval, val); +#else + print_debug(strval); print_debug_hex8(val); +#endif +} + + +static inline void print_initcpu16 (const char *strval, unsigned val) +{ +#if CONFIG_USE_INIT + printk_debug("%s%04x\r\n", strval, val); +#else + print_debug(strval); print_debug_hex16(val); print_debug("\r\n"); +#endif +} + +static inline void print_initcpu(const char *strval, unsigned val) +{ +#if CONFIG_USE_INIT + printk_debug("%s%08x\r\n", strval, val); +#else + print_debug(strval); print_debug_hex32(val); print_debug("\r\n"); +#endif +} + typedef void (*process_ap_t)(unsigned apicid, void *gp);
//core_range = 0 : all cores @@ -44,7 +87,11 @@ j = ((pci_read_config32(PCI_DEV(0, 0x18+i, 3), 0xe8) >> 12) & 3); if(nb_cfg_54) { if(j == 0 ){ // if it is single core, we need to increase siblings for apic calculation - e0_later_single_core = is_e0_later_in_bsp(i); // single core + #if K8_REV_F_SUPPORT == 0 + e0_later_single_core = is_e0_later_in_bsp(i); // single core + #else + e0_later_single_core = is_cpu_f0_in_bsp(i); // We can read cpuid(1) from Func3 + #endif } if(e0_later_single_core) { j=1; @@ -57,14 +104,17 @@ if(core_range == 2) { jstart = 1; } + else { + jstart = 0; + }
if(e0_later_single_core || disable_siblings || (core_range==1)) { jend = 0; } else { jend = siblings; - } - - + } + + for(j=jstart; j<=jend; j++) {
ap_apicid = i * (nb_cfg_54?(siblings+1):1) + j * (nb_cfg_54?1:8); @@ -141,10 +191,10 @@ if((readback & 0xff) == state) break; //target cpu is in stage started } } - static void wait_ap_started(unsigned ap_apicid, void *gp ) { wait_cpu_state(ap_apicid, 0x33); // started + print_initcpu8_nocr(" ", ap_apicid); }
static void wait_all_aps_started(unsigned bsp_apicid) @@ -152,9 +202,11 @@ for_each_ap(bsp_apicid, 0 , wait_ap_started, (void *)0); }
-static void wait_all_other_cores_started(unsigned bsp_apicid) +static void wait_all_other_cores_started(unsigned bsp_apicid) // all aps other than core0 { + print_debug("started ap apicid: "); for_each_ap(bsp_apicid, 2 , wait_ap_started, (void *)0); + print_debug("\r\n"); }
static void allow_all_aps_stop(unsigned bsp_apicid) @@ -162,8 +214,23 @@ lapic_write(LAPIC_MSG_REG, (bsp_apicid<<24) | 0x44); // allow aps to stop }
+static void STOP_CAR_AND_CPU(void) +{ + disable_cache_as_ram(); // inline + stop_this_cpu(); // inline, it will stop all cores except node0/core0 the bsp .... +} +#if RAMINIT_SYSINFO == 1
+#if MEM_TRAIN_SEQ != 1 +static inline void train_ram_on_node(unsigned nodeid, unsigned coreid, struct sys_info *sysinfo, unsigned retcall) {} +#else +static inline void train_ram_on_node(unsigned nodeid, unsigned coreid, struct sys_info *sysinfo, unsigned retcall); +#endif + +#endif + #if RAMINIT_SYSINFO == 1 + static unsigned init_cpus(unsigned cpu_init_detectedx ,struct sys_info *sysinfo) #else static unsigned init_cpus(unsigned cpu_init_detectedx) @@ -251,14 +318,16 @@ init_fidvid_ap(bsp_apicid, apicid); #endif
- // We need to stop the CACHE as RAM for this CPU, really? - wait_cpu_state(bsp_apicid, 0x44); - lapic_write(LAPIC_MSG_REG, (apicid<<24) | 0x44); // bsp can not check it before stop_this_cpu + // We need to stop the CACHE as RAM for this CPU, really? + wait_cpu_state(bsp_apicid, 0x44); + lapic_write(LAPIC_MSG_REG, (apicid<<24) | 0x44); // bsp can not check it before stop_this_cpu + set_init_ram_access(); + #if RAMINIT_SYSINFO == 1 + train_ram_on_node(id.nodeid, id.coreid, sysinfo, STOP_CAR_AND_CPU); + #endif
- set_init_ram_access(); - disable_cache_as_ram(); // inline - stop_this_cpu(); // inline, it will stop all cores except node0/core0 the bsp .... - } + STOP_CAR_AND_CPU(); + }
return bsp_apicid; } @@ -281,9 +350,13 @@ unsigned i; unsigned nodes = get_nodes();
- for(i=1;i<nodes;i++) { // skip bsp, because it is running on bsp - while(!is_core0_started(i)) {} - } + print_debug("core0 started: "); + for(i=1;i<nodes;i++) { // skip bsp, because it is running on bsp + while(!is_core0_started(i)) {} + print_initcpu8_nocr(" ", i); + } + print_debug("\r\n"); + }
#endif
Modified: trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/model_fxx_init.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/model_fxx_init.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/model_fxx_init.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -13,6 +13,7 @@ #include <device/device.h> #include <device/pci.h> #include <string.h> +#include <cpu/x86/msr.h> #include <cpu/x86/pae.h> #include <pc80/mc146818rtc.h> #include <cpu/x86/lapic.h> @@ -29,6 +30,17 @@
#include <cpu/amd/model_fxx_msr.h>
+void cpus_ready_for_init(void) +{ +#if MEM_TRAIN_SEQ == 1 + struct sys_info *sysinfox = (struct sys_info *)((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); + // wait for ap memory to trained + wait_all_core0_mem_trained(sysinfox); +#endif +} + + +#if K8_REV_F_SUPPORT == 0 int is_e0_later_in_bsp(int nodeid) { uint32_t val; @@ -53,7 +65,19 @@
return e0_later; } +#endif
+#if K8_REV_F_SUPPORT == 1 +int is_cpu_f0_in_bsp(int nodeid) +{ + uint32_t dword; + device_t dev; + dev = dev_find_slot(0, PCI_DEVFN(0x18+nodeid, 3)); + dword = pci_read_config32(dev, 0xfc); + return (dword & 0xfff00) == 0x40f00; +} +#endif + #define MCI_STATUS 0x401
static inline msr_t rdmsr_amd(unsigned index) @@ -265,16 +289,20 @@ startk = (pci_read_config32(f1_dev, 0x40 + (node_id*8)) & 0xffff0000) >> 2; endk = ((pci_read_config32(f1_dev, 0x44 + (node_id*8)) & 0xffff0000) >> 2) + 0x4000;
-#if K8_HW_MEM_HOLE_SIZEK != 0 +#if HW_MEM_HOLE_SIZEK != 0 + #if K8_REV_F_SUPPORT == 0 if (!is_cpu_pre_e0()) { + #endif
uint32_t val; val = pci_read_config32(f1_dev, 0xf0); if(val & 1) { hole_startk = ((val & (0xff<<24)) >> 10); } + #if K8_REV_F_SUPPORT == 0 } + #endif #endif
@@ -294,7 +322,7 @@ disable_lapic();
/* Walk through 2M chunks and zero them */ -#if K8_HW_MEM_HOLE_SIZEK != 0 +#if HW_MEM_HOLE_SIZEK != 0 /* here hole_startk can not be equal to begink, never. Also hole_startk is in 2M boundary, 64M? */ if ( (hole_startk != 0) && ((begink < hole_startk) && (endk>(4*1024*1024)))) { for(basek = begink; basek < hole_startk; @@ -336,9 +364,11 @@ printk_debug(" done\n"); }
+ static inline void k8_errata(void) { msr_t msr; +#if K8_REV_F_SUPPORT == 0 if (is_cpu_pre_c0()) { /* Erratum 63... */ msr = rdmsr(HWCR_MSR); @@ -406,8 +436,11 @@ msr.hi |=1; wrmsr_amd(CPU_ID_HYPER_EXT_FEATURES, msr); } +#endif
+#if K8_REV_F_SUPPORT == 0 if (!is_cpu_pre_e0()) +#endif { /* Erratum 110 ... */ msr = rdmsr_amd(CPU_ID_EXT_FEATURES_MSR); @@ -420,9 +453,96 @@ msr.lo |= 1 << 6; wrmsr(HWCR_MSR, msr);
+#if K8_REV_F_SUPPORT == 1 + /* Erratum 131... */ + msr = rdmsr(NB_CFG_MSR); + msr.lo |= 1 << 20; + wrmsr(NB_CFG_MSR, msr); +#endif + }
+#if K8_REV_F_SUPPORT == 1 +static void amd_set_name_string_f(device_t dev) +{ + unsigned socket; + unsigned cmpCap; + unsigned pwrLmt; + unsigned brandId; + unsigned brandTableIndex; + unsigned nN; + unsigned unknown = 1;
+ uint8_t str[48]; + uint32_t *p; + + msr_t msr; + unsigned i; + + brandId = cpuid_ebx(0x80000001) & 0xffff; + + printk_debug("brandId=%04x\n", brandId); + pwrLmt = ((brandId>>14) & 1) | ((brandId>>5) & 0x0e); + brandTableIndex = (brandId>>9) & 0x1f; + nN = (brandId & 0x3f) | ((brandId>>(15-6)) &(1<<6)); + + socket = (dev->device >> 4) & 0x3; + + cmpCap = cpuid_ecx(0x80000008) & 0xff; + + + if((brandTableIndex == 0) && (pwrLmt == 0)) { + memset(str, 0, 48); + sprintf(str, "AMD Engineering Sample"); + unknown = 0; + } else { + + memset(str, 0, 48); + sprintf(str, "AMD Processor model unknown"); + + #if CPU_SOCKET_TYPE == 0x10 + if(socket == 0x01) { // socket F + if ((cmpCap == 1) && ((brandTableIndex==0) ||(brandTableIndex ==1) ||(brandTableIndex == 4)) ) { + uint8_t pc[2]; + unknown = 0; + switch (pwrLmt) { + case 2: pc[0]= 'E'; pc[1] = 'E'; break; + case 6: pc[0]= 'H'; pc[1] = 'E'; break; + case 0xa: pc[0]= ' '; pc[1] = ' '; break; + case 0xc: pc[0]= 'S'; pc[1] = 'E'; break; + default: unknown = 1; + + } + if(!unknown) { + memset(str, 0, 48); + sprintf(str, "Dual-Core AMD Opteron(tm) Processor %1d2%2d %c%c", brandTableIndex<<1, (nN-1)&0x3f, pc[0], pc[1]); + } + } + } + #else + #if CPU_SOCKET_TYPE == 0x11 + if(socket == 0x00) { // socket AM2 + if(cmpCap == 0) { + sprintf(str, "Athlon 64"); + } else { + sprintf(str, "Athlon 64 Dual Core"); + } + + } + #endif + #endif + } + + p = str; + for(i=0;i<6;i++) { + msr.lo = *p; p++; msr.hi = *p; p++; + wrmsr(0xc0010030+i, msr); + } + + +} +#endif + extern void model_fxx_update_microcode(unsigned cpu_deviceid); int init_processor_name(void);
@@ -435,6 +555,16 @@ unsigned siblings; #endif
+#if K8_REV_F_SUPPORT == 1 + struct cpuinfo_x86 c; + + get_fms(&c, dev->device); + + if((c.x86_model & 0xf0) == 0x40) { + amd_set_name_string_f(dev); + } +#endif + /* Turn on caching if we haven't already */ x86_enable_cache(); amd_setup_mtrrs(); @@ -504,6 +634,7 @@ .init = model_fxx_init, }; static struct cpu_device_id cpu_table[] = { +#if K8_REV_F_SUPPORT == 0 { X86_VENDOR_AMD, 0xf50 }, /* B3 */ { X86_VENDOR_AMD, 0xf51 }, /* SH7-B3 */ { X86_VENDOR_AMD, 0xf58 }, /* SH7-C0 */ @@ -540,7 +671,26 @@ { X86_VENDOR_AMD, 0x20fc2 }, { X86_VENDOR_AMD, 0x20f12 }, /* JH-E6 */ { X86_VENDOR_AMD, 0x20f32 }, +#endif
+#if K8_REV_F_SUPPORT == 1 +//AMD_F0_SUPPORT + { X86_VENDOR_AMD, 0x40f50 }, /* SH-F0 Socket F (1207): Opteron */ + { X86_VENDOR_AMD, 0x40f70 }, /* AM2: Athlon64/Athlon64 FX */ + { X86_VENDOR_AMD, 0x40f40 }, /* S1g1: Mobile Athlon64 */ + { X86_VENDOR_AMD, 0x40f11 }, /* JH-F1 Socket F (1207): Opteron Dual Core */ + { X86_VENDOR_AMD, 0x40f31 }, /* AM2: Athlon64 x2/Athlon64 FX Dual Core */ + { X86_VENDOR_AMD, 0x40f01 }, /* S1g1: Mobile Athlon64 */ + { X86_VENDOR_AMD, 0x40f12 }, /* JH-F2 Socket F (1207): Opteron Dual Core */ + { X86_VENDOR_AMD, 0x40f32 }, /* AM2 : Opteron Dual Core/Athlon64 x2/ Athlon64 FX Dual Core */ + { X86_VENDOR_AMD, 0x40fb2 }, /* BH-F2 Socket AM2:Athlon64 x2/ Mobile Athlon64 x2 */ + { X86_VENDOR_AMD, 0x40f82 }, /* S1g1:Turion64 x2 */ + { X86_VENDOR_AMD, 0x40ff2 }, /* DH-F2 Socket AM2: Athlon64 */ + { X86_VENDOR_AMD, 0x40fc2 }, /* S1g1:Turion64 */ + { X86_VENDOR_AMD, 0x40f13 }, /* JH-F3 Socket F (1207): Opteron Dual Core */ + { X86_VENDOR_AMD, 0x40f33 }, /* AM2 : Opteron Dual Core/Athlon64 x2/ Athlon64 FX Dual Core */ +#endif + { 0, 0 }, }; static struct cpu_driver model_fxx __cpu_driver = {
Modified: trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/model_fxx_update_microcode.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/model_fxx_update_microcode.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/amd/model_fxx/model_fxx_update_microcode.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -1,5 +1,5 @@ /* Copyright 2005 AMD - * 2005.08 yhlu add microcode support + * 2005.08 yhlu add microcode support */ /*============================================================================ Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. @@ -52,10 +52,15 @@
static uint8_t microcode_updates[] __attribute__ ((aligned(16))) = {
-#include "microcode_rev_c.h" -#include "microcode_rev_d.h" -#include "microcode_rev_e.h" +#if K8_REV_F_SUPPORT == 0 + #include "microcode_rev_c.h" + #include "microcode_rev_d.h" + #include "microcode_rev_e.h" +#endif
+#if K8_REV_F_SUPPORT == 1 +// #include "microcode_rev_f.h" +#endif /* Dummy terminator */ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @@ -65,6 +70,7 @@
static unsigned get_equivalent_processor_rev_id(unsigned orig_id) { static unsigned id_mapping_table[] = { + #if K8_REV_F_SUPPORT == 0 0x0f48, 0x0048, 0x0f58, 0x0048,
@@ -85,7 +91,12 @@ 0x20f12, 0x0210, 0x20f32, 0x0210, 0x20fb1, 0x0210, + #endif
+ #if K8_REV_F_SUPPORT == 1 + + #endif + };
Modified: trunk/LinuxBIOSv2/src/cpu/amd/model_gx2/vsmsetup.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/model_gx2/vsmsetup.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/amd/model_gx2/vsmsetup.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -254,6 +254,7 @@ unsigned char *buf; unsigned int size = SMM_SIZE*1024; int i; + unsigned long ilen, olen; printk_err("do_vsmbios\n"); /* clear vsm bios data area */ @@ -273,7 +274,8 @@ rom = ((unsigned long) 0) - (ROM_SIZE + 64*1024);
buf = (unsigned char *) 0x60000; - unrv2b((uint8_t *)rom, buf); + olen = unrv2b((uint8_t *)rom, buf, &ilen); + printk_debug("buf ilen %d olen%d\n", ilen, olen); printk_debug("buf %p *buf %d buf[256k] %d\n", buf, buf[0], buf[SMM_SIZE*1024]); printk_debug("buf[0x20] signature is %x:%x:%x:%x\n",
Modified: trunk/LinuxBIOSv2/src/cpu/amd/model_lx/vsmsetup.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/model_lx/vsmsetup.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/amd/model_lx/vsmsetup.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -295,6 +295,7 @@ unsigned char *buf; unsigned int size = SMM_SIZE*1024; int i; + unsigned long ilen, olen; printk_err("do_vsmbios\n"); /* clear vsm bios data area */ @@ -316,7 +317,8 @@ rom = 0xfffc8000;
buf = (unsigned char *) VSA2_BUFFER; - unrv2b((uint8_t *)rom, buf); + olen = unrv2b((uint8_t *)rom, buf, &ilen); + printk_debug("buf ilen %d olen%d\n", ilen, olen); printk_debug("buf %p *buf %d buf[256k] %d\n", buf, buf[0], buf[SMM_SIZE*1024]); printk_debug("buf[0x20] signature is %x:%x:%x:%x\n",
Modified: trunk/LinuxBIOSv2/src/cpu/amd/mtrr/amd_earlymtrr.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/mtrr/amd_earlymtrr.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/amd/mtrr/amd_earlymtrr.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -15,7 +15,6 @@ */ msr_t msr; const unsigned long *msr_addr; - unsigned long cr0; #if 0 /* Enable the access to AMD RdDram and WrDram extension bits */ msr = rdmsr(SYSCFG_MSR);
Modified: trunk/LinuxBIOSv2/src/cpu/amd/mtrr/amd_mtrr.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/mtrr/amd_mtrr.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/amd/mtrr/amd_mtrr.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -149,7 +149,7 @@ msr.lo = state.mmio_basek << 10; wrmsr(TOP_MEM, msr);
- if(state.tomk>(4*1024*1024)) { + if(state.tomk > (4*1024*1024)) { /* Setup TOP_MEM2 */ msr.hi = state.tomk >> 22; msr.lo = state.tomk << 10; @@ -180,7 +180,7 @@ /* FIXME we should probably query the cpu for this * but so far this is all any recent AMD cpu has supported. */ - address_bits = 40; + address_bits = CPU_ADDR_BITS; //K8 could be 40, and GH could be 48
/* Now that I have mapped what is memory and what is not * Setup the mtrrs so we can cache the memory.
Added: trunk/LinuxBIOSv2/src/cpu/amd/socket_AM2/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/socket_AM2/Config.lb (rev 0) +++ trunk/LinuxBIOSv2/src/cpu/amd/socket_AM2/Config.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,19 @@ +uses CONFIG_CHIP_NAME +uses K8_REV_F_SUPPORT +uses K8_HT_FREQ_1G_SUPPORT +uses DIMM_SUPPORT +uses CPU_SOCKET_TYPE + +if CONFIG_CHIP_NAME + config chip.h +end + +default K8_REV_F_SUPPORT=1 +#Opteron K8 1G HT Support +default K8_HT_FREQ_1G_SUPPORT=1 +default DIMM_SUPPORT=0x0004 #DDR2 unbuffered +default CPU_SOCKET_TYPE=0x11 + +object socket_AM2.o + +dir /cpu/amd/model_fxx
Added: trunk/LinuxBIOSv2/src/cpu/amd/socket_AM2/chip.h =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/socket_AM2/chip.h (rev 0) +++ trunk/LinuxBIOSv2/src/cpu/amd/socket_AM2/chip.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,4 @@ +extern struct chip_operations cpu_amd_socket_AM2_ops; + +struct cpu_amd_socket_AM2_config { +};
Added: trunk/LinuxBIOSv2/src/cpu/amd/socket_AM2/socket_AM2.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/socket_AM2/socket_AM2.c (rev 0) +++ trunk/LinuxBIOSv2/src/cpu/amd/socket_AM2/socket_AM2.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,6 @@ +#include <device/device.h> +#include "chip.h" + +struct chip_operations cpu_amd_socket_AM2_ops = { + CHIP_NAME("socket AM2") +};
Added: trunk/LinuxBIOSv2/src/cpu/amd/socket_F/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/socket_F/Config.lb (rev 0) +++ trunk/LinuxBIOSv2/src/cpu/amd/socket_F/Config.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,19 @@ +uses CONFIG_CHIP_NAME +uses K8_REV_F_SUPPORT +uses K8_HT_FREQ_1G_SUPPORT +uses DIMM_SUPPORT +uses CPU_SOCKET_TYPE + +if CONFIG_CHIP_NAME + config chip.h +end + +default K8_REV_F_SUPPORT=1 +#Opteron K8 1G HT Support +default K8_HT_FREQ_1G_SUPPORT=1 +default DIMM_SUPPORT=0x0104 #DDR2 and REG +default CPU_SOCKET_TYPE=0x10 + +object socket_F.o + +dir /cpu/amd/model_fxx
Added: trunk/LinuxBIOSv2/src/cpu/amd/socket_F/chip.h =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/socket_F/chip.h (rev 0) +++ trunk/LinuxBIOSv2/src/cpu/amd/socket_F/chip.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,4 @@ +extern struct chip_operations cpu_amd_socket_F_ops; + +struct cpu_amd_socket_F_config { +};
Added: trunk/LinuxBIOSv2/src/cpu/amd/socket_F/socket_F.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/amd/socket_F/socket_F.c (rev 0) +++ trunk/LinuxBIOSv2/src/cpu/amd/socket_F/socket_F.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,6 @@ +#include <device/device.h> +#include "chip.h" + +struct chip_operations cpu_amd_socket_F_ops = { + CHIP_NAME("socket F") +};
Modified: trunk/LinuxBIOSv2/src/cpu/x86/car/copy_and_run.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/x86/car/copy_and_run.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/x86/car/copy_and_run.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -44,7 +44,7 @@ // dump_mem(src, src+0x100);
- olen=unrv2b(src, dst); + olen = unrv2b(src, dst, &ilen);
#endif // dump_mem(dst, dst+0x100);
Modified: trunk/LinuxBIOSv2/src/cpu/x86/lapic/lapic.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/x86/lapic/lapic.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/x86/lapic/lapic.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -55,7 +55,7 @@ LAPIC_DELIVERY_MODE_NMI) );
- printk_debug(" apic_id: %d ", lapicid()); + printk_debug(" apic_id: 0x%02x ", lapicid());
#else /* !NEED_LLAPIC */ /* Only Pentium Pro and later have those MSR stuff */
Modified: trunk/LinuxBIOSv2/src/cpu/x86/lapic/lapic_cpu_init.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/x86/lapic/lapic_cpu_init.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/x86/lapic/lapic_cpu_init.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -322,7 +322,7 @@
if (!start_cpu(cpu)) { /* Record the error in cpu? */ - printk_err("CPU %u would not start!\n", + printk_err("CPU 0x%02x would not start!\n", cpu->path.u.apic.apic_id); } #if SERIAL_CPU_INIT == 1 @@ -354,7 +354,7 @@ continue; } if (!cpu->initialized) { - printk_err("CPU %u did not initialize!\n", + printk_err("CPU 0x%02x did not initialize!\n", cpu->path.u.apic.apic_id); #warning "FIXME do I need a mainboard_cpu_fixup function?" } @@ -366,6 +366,10 @@ #define initialize_other_cpus(root) do {} while(0) #endif /* CONFIG_SMP */
+#if WAIT_BEFORE_CPUS_INIT==0 + #define cpus_ready_for_init() do {} while(0) +#endif + void initialize_cpus(struct bus *cpu_bus) { struct device_path cpu_path; @@ -394,6 +398,8 @@ copy_secondary_start_to_1m_below(); // why here? In case some day we can start core1 in amd_sibling_init #endif + cpus_ready_for_init(); + #if CONFIG_SMP == 1 #if SERIAL_CPU_INIT == 0 /* start all aps at first, so we can init ECC all together */ @@ -407,7 +413,6 @@
#if CONFIG_SMP == 1 #if SERIAL_CPU_INIT == 1 - /* start all aps */ start_other_cpus(cpu_bus, info->cpu); #endif
Modified: trunk/LinuxBIOSv2/src/cpu/x86/mtrr/earlymtrr.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/x86/mtrr/earlymtrr.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/x86/mtrr/earlymtrr.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -47,10 +47,29 @@ basem.hi = 0; wrmsr(MTRRphysBase_MSR(reg), basem); maskm.lo = ~(size - 1) | 0x800; - maskm.hi = 0x0f; + maskm.hi = (1<<(CPU_ADDR_BITS-32))-1; wrmsr(MTRRphysMask_MSR(reg), maskm); }
+static void set_var_mtrr_x( + unsigned reg, uint32_t base_lo, uint32_t base_hi, uint32_t size_lo, uint32_t size_hi, unsigned type) + +{ + /* Bit Bit 32-35 of MTRRphysMask should be set to 1 */ + msr_t basem, maskm; + basem.lo = (base_lo & 0xfffff000) | type; + basem.hi = base_hi & ((1<<(CPU_ADDR_BITS-32))-1); + wrmsr(MTRRphysBase_MSR(reg), basem); + maskm.hi = (1<<(CPU_ADDR_BITS-32))-1; + if(size_lo) { + maskm.lo = ~(size_lo - 1) | 0x800; + } else { + maskm.lo = 0x800; + maskm.hi &= ~(size_hi - 1); + } + wrmsr(MTRRphysMask_MSR(reg), maskm); +} + static void cache_lbmem(int type) { /* Enable caching for 0 - 1MB using variable mtrr */ @@ -70,7 +89,6 @@ */ msr_t msr; const unsigned long *msr_addr; - unsigned long cr0;
/* Inialize all of the relevant msrs to 0 */ msr.lo = 0;
Modified: trunk/LinuxBIOSv2/src/cpu/x86/mtrr/mtrr.c =================================================================== --- trunk/LinuxBIOSv2/src/cpu/x86/mtrr/mtrr.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/cpu/x86/mtrr/mtrr.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -70,6 +70,25 @@ msr_t base, mask; unsigned address_mask_high;
+ if (reg >= 8) + return; + + // it is recommended that we disable and enable cache when we + // do this. + if (sizek == 0) { + disable_cache(); + + msr_t zero; + zero.lo = zero.hi = 0; + /* The invalid bit is kept in the mask, so we simply clear the + relevant mask register to disable a range. */ + wrmsr (MTRRphysMask_MSR(reg), zero); + + enable_cache(); + return; + } + + address_mask_high = ((1u << (address_bits - 32u)) - 1u);
base.hi = basek >> 22; @@ -86,25 +105,16 @@ mask.lo = 0; }
- if (reg >= 8) - return; - // it is recommended that we disable and enable cache when we // do this. disable_cache(); - if (sizek == 0) { - msr_t zero; - zero.lo = zero.hi = 0; - /* The invalid bit is kept in the mask, so we simply clear the - relevant mask register to disable a range. */ - wrmsr (MTRRphysMask_MSR(reg), zero); - } else { - /* Bit 32-35 of MTRRphysMask should be set to 1 */ - base.lo |= type; - mask.lo |= 0x800; - wrmsr (MTRRphysBase_MSR(reg), base); - wrmsr (MTRRphysMask_MSR(reg), mask); - } + + /* Bit 32-35 of MTRRphysMask should be set to 1 */ + base.lo |= type; + mask.lo |= 0x800; + wrmsr (MTRRphysBase_MSR(reg), base); + wrmsr (MTRRphysMask_MSR(reg), mask); + enable_cache(); }
Modified: trunk/LinuxBIOSv2/src/devices/device_util.c =================================================================== --- trunk/LinuxBIOSv2/src/devices/device_util.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/devices/device_util.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -430,7 +430,7 @@ end = resource_end(resource); buf[0] = '\0'; if (resource->flags & IORESOURCE_PCI_BRIDGE) { - sprintf(buf, "bus %d ", dev->link[0].secondary); + sprintf(buf, "bus %02x ", dev->link[0].secondary); } printk_debug( "%s %02x <- [0x%010Lx - 0x%010Lx] %s%s%s\n",
Modified: trunk/LinuxBIOSv2/src/devices/hypertransport.c =================================================================== --- trunk/LinuxBIOSv2/src/devices/hypertransport.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/devices/hypertransport.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -3,7 +3,6 @@
*/
- #include <bitops.h> #include <console/console.h> #include <device/device.h> @@ -78,9 +77,11 @@ /* AMD K8 Unsupported 1Ghz? */ if ((dev->vendor == PCI_VENDOR_ID_AMD) && (dev->device == 0x1100)) { #if K8_HT_FREQ_1G_SUPPORT == 1 + #if K8_REV_F_SUPPORT == 0 if (is_cpu_pre_e0()) { // only e0 later suupport 1GHz HT freq_cap &= ~(1 << HT_FREQ_1000Mhz); } + #endif #else freq_cap &= ~(1 << HT_FREQ_1000Mhz); #endif @@ -450,8 +451,8 @@ }
flags &= ~0x1f; /* mask out base Unit ID */ - flags |= next_unitid & 0x1f; - pci_write_config16(dev, pos + PCI_CAP_FLAGS, flags); + flags |= next_unitid & 0x1f; + pci_write_config16(dev, pos + PCI_CAP_FLAGS, flags);
/* Update the Unitd id in the device structure */ static_count = 1; @@ -490,7 +491,6 @@ dev->vendor, dev->device, (dev->enabled? "enabled": "disabled"), next_unitid);
- } while((last_unitid != next_unitid) && (next_unitid <= (max_devfn >> 3))); end_of_chain: #if OPT_HT_LINK == 1 @@ -560,9 +560,17 @@ * * @return The maximum bus number found, after scanning all subordinate busses */ +unsigned int hypertransport_scan_chain_x(struct bus *bus, + unsigned min_devfn, unsigned max_devfn, unsigned int max) +{ + unsigned ht_unitid_base[4]; + unsigned offset_unitid = 1; + return hypertransport_scan_chain(bus, min_devfn, max_devfn, max, ht_unitid_base, offset_unitid); +} + unsigned int ht_scan_bridge(struct device *dev, unsigned int max) { - return do_pci_scan_bridge(dev, max, hypertransport_scan_chain); + return do_pci_scan_bridge(dev, max, hypertransport_scan_chain_x); }
Modified: trunk/LinuxBIOSv2/src/include/cpu/amd/microcode.h =================================================================== --- trunk/LinuxBIOSv2/src/include/cpu/amd/microcode.h 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/include/cpu/amd/microcode.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -2,4 +2,5 @@ #define CPU_AMD_MICORCODE_H
void amd_update_microcode(void *microcode_updates, unsigned processor_rev_id); -#endif /* CPU_AMD_MICROCODE_H */ \ No newline at end of file +#endif /* CPU_AMD_MICROCODE_H */ +
Modified: trunk/LinuxBIOSv2/src/include/cpu/amd/model_fxx_rev.h =================================================================== --- trunk/LinuxBIOSv2/src/include/cpu/amd/model_fxx_rev.h 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/include/cpu/amd/model_fxx_rev.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -1,5 +1,6 @@ #include <arch/cpu.h>
+#if K8_REV_F_SUPPORT == 0 static inline int is_cpu_rev_a0(void) { return (cpuid_eax(1) & 0xfffef) == 0x0f00; @@ -74,5 +75,46 @@ int is_e0_later_in_bsp(int nodeid); //defined model_fxx_init.c #endif
+#endif
+#if K8_REV_F_SUPPORT == 1 +//AMD_F0_SUPPORT +static inline int is_cpu_pre_f0(void) +{ + return (cpuid_eax(1) & 0xfff0f) < 0x40f00; +}
+static inline int is_cpu_f0(void) +{ + return (cpuid_eax(1) & 0xfff00) == 0x40f00; +} + +static inline int is_cpu_pre_f2(void) +{ + return (cpuid_eax(1) & 0xfff0f) < 0x40f02; +} + +#ifdef __ROMCC__ +//AMD_F0_SUPPORT +static int is_cpu_f0_in_bsp(int nodeid) +{ + uint32_t dword; + device_t dev; + dev = PCI_DEV(0, 0x18+nodeid, 3); + dword = pci_read_config32(dev, 0xfc); + return (dword & 0xfff00) == 0x40f00; +} +static int is_cpu_pre_f2_in_bsp(int nodeid) +{ + uint32_t dword; + device_t dev; + dev = PCI_DEV(0, 0x18+nodeid, 3); + dword = pci_read_config32(dev, 0xfc); + return (dword & 0xfff0f) < 0x40f02; +} +#else +int is_cpu_f0_in_bsp(int nodeid); // defined in model_fxx_init.c +#endif + +#endif +
Modified: trunk/LinuxBIOSv2/src/include/cpu/x86/mem.h =================================================================== --- trunk/LinuxBIOSv2/src/include/cpu/x86/mem.h 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/include/cpu/x86/mem.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -6,7 +6,7 @@ { asm volatile( "cld \n\t" - "rep stosl\n\t" + "rep; stosl\n\t" : /* No outputs */ : "a" (0), "D" (addr), "c" (size>>2) );
Modified: trunk/LinuxBIOSv2/src/include/device/device.h =================================================================== --- trunk/LinuxBIOSv2/src/include/device/device.h 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/include/device/device.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -48,14 +48,14 @@ device_t children; /* devices behind this bridge */ unsigned bridge_ctrl; /* Bridge control register */ unsigned char link; /* The index of this link */ - unsigned char secondary; /* secondary bus number */ - unsigned char subordinate; /* max subordinate bus number */ + uint16_t secondary; /* secondary bus number */ + uint16_t subordinate; /* max subordinate bus number */ unsigned char cap; /* PCi capability offset */ unsigned reset_needed : 1; unsigned disable_relaxed_ordering : 1; };
-#define MAX_RESOURCES 12 +#define MAX_RESOURCES 12 #define MAX_LINKS 8 /* * There is one device structure for each slot-number/function-number
Modified: trunk/LinuxBIOSv2/src/include/device/hypertransport_def.h =================================================================== --- trunk/LinuxBIOSv2/src/include/device/hypertransport_def.h 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/include/device/hypertransport_def.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -11,6 +11,11 @@ #define HT_FREQ_1200Mhz 7 #define HT_FREQ_1400Mhz 8 #define HT_FREQ_1600Mhz 9 +#define HT_FREQ_1800Mhz 10 +#define HT_FREQ_2000Mhz 11 +#define HT_FREQ_2200Mhz 12 +#define HT_FREQ_2400Mhz 13 +#define HT_FREQ_2600Mhz 14 #define HT_FREQ_VENDOR 15 /* AMD defines this to be 100Mhz */
#endif /* DEVICE_HYPERTRANSPORT_DEF_H */
Modified: trunk/LinuxBIOSv2/src/include/device/pci.h =================================================================== --- trunk/LinuxBIOSv2/src/include/device/pci.h 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/include/device/pci.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -29,12 +29,12 @@
/* Common pci bus operations */ struct pci_bus_operations { - uint8_t (*read8) (struct bus *pbus, unsigned char bus, int devfn, int where); - uint16_t (*read16) (struct bus *pbus, unsigned char bus, int devfn, int where); - uint32_t (*read32) (struct bus *pbus, unsigned char bus, int devfn, int where); - void (*write8) (struct bus *pbus, unsigned char bus, int devfn, int where, uint8_t val); - void (*write16) (struct bus *pbus, unsigned char bus, int devfn, int where, uint16_t val); - void (*write32) (struct bus *pbus, unsigned char bus, int devfn, int where, uint32_t val); + uint8_t (*read8) (struct bus *pbus, int bus, int devfn, int where); + uint16_t (*read16) (struct bus *pbus, int bus, int devfn, int where); + uint32_t (*read32) (struct bus *pbus, int bus, int devfn, int where); + void (*write8) (struct bus *pbus, int bus, int devfn, int where, uint8_t val); + void (*write16) (struct bus *pbus, int bus, int devfn, int where, uint16_t val); + void (*write32) (struct bus *pbus, int bus, int devfn, int where, uint32_t val); };
struct pci_driver {
Modified: trunk/LinuxBIOSv2/src/include/device/pci_def.h =================================================================== --- trunk/LinuxBIOSv2/src/include/device/pci_def.h 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/include/device/pci_def.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -201,6 +201,7 @@ #define PCI_HT_CAP_SLAVE_FREQ1 0x011 /* Slave frequency to */ #define PCI_HT_CAP_SLAVE_FREQ_CAP0 0x0e /* Frequency capability from */ #define PCI_HT_CAP_SLAVE_FREQ_CAP1 0x12 /* Frequency capability to */ +#define PCI_HT_CAP_SLAVE_LINK_ENUM 0x14 /* Link Enumeration Scratchpad */
/* Power Management Registers */
Modified: trunk/LinuxBIOSv2/src/lib/nrv2b.c =================================================================== --- trunk/LinuxBIOSv2/src/lib/nrv2b.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/lib/nrv2b.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -28,18 +28,13 @@ #if ENDIAN == 0 && BITSIZE == 32 #define GETBIT(bb, src, ilen) GETBIT_LE32(bb, src, ilen) #endif - -static unsigned long unrv2b(uint8_t * src, uint8_t * dst) +static unsigned long unrv2b(uint8_t * src, uint8_t * dst, unsigned long *ilen_p) { unsigned long ilen = 0, olen = 0, last_m_off = 1; uint32_t bb = 0; unsigned bc = 0; const uint8_t *m_pos; -// unsigned long file_len = *(unsigned long *) src;
- // we only have printk_debug in copy_and_run.c if CONFIG_USE_INIT is - // not set, so comment it out. - // printk_debug("compressed file len is supposed to be %d bytes\n", file_len); // skip length src += 4; /* FIXME: check olen with the length stored in first 4 bytes */ @@ -81,9 +76,8 @@ } while (--m_len > 0); }
- // we only have printk_debug in copy_and_run.c if CONFIG_USE_INIT is - // not set, so comment it out. - //printk_debug("computed len is %d, file len is %d\n", olen, file_len); + *ilen_p = ilen; + return olen;
}
Modified: trunk/LinuxBIOSv2/src/mainboard/Iwill/DK8HTX/auto.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/Iwill/DK8HTX/auto.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/Iwill/DK8HTX/auto.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -11,7 +11,6 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -23,7 +22,6 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -126,8 +124,10 @@
#include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "sdram/generic_sdram.c" #include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c"
#define FIRST_CPU 1 #define SECOND_CPU 1
Modified: trunk/LinuxBIOSv2/src/mainboard/Iwill/DK8S2/auto.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/Iwill/DK8S2/auto.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/Iwill/DK8S2/auto.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -11,7 +11,6 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -23,7 +22,6 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -126,8 +124,10 @@
#include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "sdram/generic_sdram.c" #include "northbridge/amd/amdk8/resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c"
#define FIRST_CPU 1 #define SECOND_CPU 1
Modified: trunk/LinuxBIOSv2/src/mainboard/Iwill/DK8X/auto.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/Iwill/DK8X/auto.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/Iwill/DK8X/auto.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -11,7 +11,6 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -24,7 +23,6 @@ #include "superio/NSC/pc87360/pc87360_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
@@ -128,8 +126,10 @@
#include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "sdram/generic_sdram.c" #include "northbridge/amd/amdk8/resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c"
#define FIRST_CPU 1 #define SECOND_CPU 1
Modified: trunk/LinuxBIOSv2/src/mainboard/agami/aruma/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/agami/aruma/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/agami/aruma/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -138,7 +138,7 @@ default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcc000 default DCACHE_RAM_SIZE=0x4000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0
## ## Build code to setup a generic IOAPIC
Modified: trunk/LinuxBIOSv2/src/mainboard/amd/serenade/auto.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serenade/auto.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serenade/auto.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -13,7 +13,6 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -25,7 +24,6 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
@@ -128,8 +126,10 @@
#include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "sdram/generic_sdram.c" #include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c"
#define FIRST_CPU 1 #define SECOND_CPU 1
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/Config.lb (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/Config.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,406 @@ +## +## Compute the location and size of where this firmware image +## (linuxBIOS plus bootloader) will live in the boot rom chip. +## +if USE_FAILOVER_IMAGE + default ROM_SECTION_SIZE = FAILOVER_SIZE + default ROM_SECTION_OFFSET = ( ROM_SIZE - FAILOVER_SIZE ) +else + if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE ) + else + default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE ) + default ROM_SECTION_OFFSET = 0 + end +end + +## +## Compute the start location and size size of +## The linuxBIOS bootloader. +## +default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) + +## +## Compute where this copy of linuxBIOS will start in the boot rom +## +default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) + +## +## Compute a range of ROM that can cached to speed up linuxBIOS, +## execution speed. +## +## XIP_ROM_SIZE must be a power of 2. +## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE +## +default XIP_ROM_SIZE=65536 + +if USE_FAILOVER_IMAGE + default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) +else + if USE_FALLBACK_IMAGE + default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE) + else + default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) + end +end + +arch i386 end + +## +## Build the objects we have code for in this directory. +## + +driver mainboard.o + +#dir /drivers/si/3114 + +#needed by irq_tables and mptable and acpi_tables +object get_bus_conf.o + +if HAVE_MP_TABLE + object mptable.o +end + +if HAVE_PIRQ_TABLE + object irq_tables.o +end + +#if HAVE_ACPI_TABLES +# object acpi_tables.o +# object fadt.o +# if SB_HT_CHAIN_ON_BUS0 +# object dsdt_bus0.o +# else +# object dsdt.o +# end +# object ssdt.o +# if ACPI_SSDTX_NUM +# if SB_HT_CHAIN_ON_BUS0 +# object ssdt2_bus0.o +# else +# object ssdt2.o +# end +# end +#end + +if HAVE_ACPI_TABLES + object acpi_tables.o + object fadt.o + makerule dsdt.c + depends "$(MAINBOARD)/dx/dsdt_lb.dsl" + action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/dsdt_lb.dsl" + action "mv dsdt_lb.hex dsdt.c" + end + object ./dsdt.o + + #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb + + if ACPI_SSDTX_NUM + makerule ssdt2.c + depends "$(MAINBOARD)/dx/pci2.asl" + action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/pci2.asl" + action "perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex" + action "mv pci2.hex ssdt2.c" + end + object ./ssdt2.o + end +end + +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + # compile cache_as_ram.c to auto.o + makerule ./cache_as_ram_auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + end + + else + #compile cache_as_ram.c to auto.inc + makerule ./cache_as_ram_auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end + + end +end + +if USE_FAILOVER_IMAGE +else + if CONFIG_AP_CODE_IN_CAR + makerule ./apc_auto.o + depends "$(MAINBOARD)/apc_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + end + ldscript /arch/i386/init/ldscript_apc.lb + end +end + +## +## Build our 16 bit and 32 bit linuxBIOS entry code +## + +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end +else + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end +end + +mainboardinit cpu/x86/32bit/entry32.inc +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end + +## +## Build our reset vector (This is where linuxBIOS is entered) +## +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end +else + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end +end + +## +## Include an id string (For safe flashing) +## +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds + +if USE_DCACHE_RAM + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc +end + +### +### This is the early phase of linuxBIOS startup +### Things are delicate and we test to see if we should +### failover to another image. +### +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover_failover.lds + end + end +else + if USE_FALLBACK_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds + end + end +end + +### +### O.k. We aren't just an intermediary anymore! +### + +## +## Setup RAM +## +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + initobject cache_as_ram_auto.o + else + mainboardinit ./cache_as_ram_auto.inc + end + +end + +## +## Include the secondary Configuration files +## +if CONFIG_CHIP_NAME + config chip.h +end + +# sample config for amd/serengeti_cheetah +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/amd/amd8132 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 off end + device pci 1.0 off end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on + chip drivers/i2c/i2cmux # pca9556 smbus mux + device i2c 18 on #0 pca9516 1 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end + device i2c 18 on #1 pca9516 2 + chip drivers/generic/generic #dimm 1-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-2-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-2-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-3-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-3-1 + device i2c 57 on end + end + end + end + end # acpi + device pci 1.5 off end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + chip northbridge/amd/amdk8 + device pci 19.0 on # northbridge + chip southbridge/amd/amd8151 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 1.0 on end + end + end # device pci 19.0 + + device pci 19.0 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + end + + + end #pci_domain +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 off end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# end + +end + +
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/Options.lb (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,329 @@ +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses HAVE_ACPI_TABLES +uses ACPI_SSDTX_NUM +uses USE_FALLBACK_IMAGE +uses USE_FAILOVER_IMAGE +uses HAVE_FALLBACK_BOOT +uses HAVE_FAILOVER_BOOT +uses HAVE_HARD_RESET +uses IRQ_SLOT_COUNT +uses HAVE_OPTION_TABLE +uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses CONFIG_LOGICAL_CPUS +uses CONFIG_IOAPIC +uses CONFIG_SMP +uses FALLBACK_SIZE +uses FAILOVER_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_STREAM +uses CONFIG_ROM_STREAM_START +uses CONFIG_COMPRESSED_ROM_STREAM +uses PAYLOAD_SIZE +uses _ROMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses STACK_SIZE +uses HEAP_SIZE +uses USE_OPTION_TABLE +uses LB_CKS_RANGE_START +uses LB_CKS_RANGE_END +uses LB_CKS_LOC +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR +uses MAINBOARD +uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses LINUXBIOS_EXTRA_VERSION +uses _RAMBASE +uses TTYS0_BAUD +uses TTYS0_BASE +uses TTYS0_LCS +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_CONSOLE_SERIAL8250 +uses HAVE_INIT_TIMER +uses CONFIG_GDB_STUB +uses CONFIG_GDB_STUB +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY +uses CONFIG_CHIP_NAME +uses CONFIG_CONSOLE_VGA +uses CONFIG_PCI_ROM_RUN +uses HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZE_AUTO_INC +uses K8_HT_FREQ_1G_SUPPORT + +uses HT_CHAIN_UNITID_BASE +uses HT_CHAIN_END_UNITID_BASE +uses SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_UNITID_OFFSET_ONLY + +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses DCACHE_RAM_GLOBAL_VAR_SIZE +uses CONFIG_USE_INIT + +uses SERIAL_CPU_INIT + +uses ENABLE_APIC_EXT_ID +uses APIC_ID_OFFSET +uses LIFT_BSP_APIC_ID + +uses CONFIG_PCI_64BIT_PREF_MEM + +uses CONFIG_LB_MEM_TOPK + +uses CONFIG_AP_CODE_IN_CAR + +uses MEM_TRAIN_SEQ + +uses WAIT_BEFORE_CPUS_INIT + +### +### Build options +### + +## +## ROM_SIZE is the size of boot ROM that this board will use. +## +default ROM_SIZE=524288 + +## +## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## +#default FALLBACK_SIZE=131072 +#default FALLBACK_SIZE=0x40000 + +#FALLBACK: 256K-4K +default FALLBACK_SIZE=0x3f000 +#FAILOVER: 4K +default FAILOVER_SIZE=0x01000 + +#more 1M for pgtbl +default CONFIG_LB_MEM_TOPK=2048 + +## +## Build code for the fallback boot +## +default HAVE_FALLBACK_BOOT=1 +default HAVE_FAILOVER_BOOT=1 + +## +## Build code to reset the motherboard from linuxBIOS +## +default HAVE_HARD_RESET=1 + +## +## Build code to export a programmable irq routing table +## +default HAVE_PIRQ_TABLE=1 +default IRQ_SLOT_COUNT=11 + +## +## Build code to export an x86 MP table +## Useful for specifying IRQ routing values +## +default HAVE_MP_TABLE=1 + +## ACPI tables will be included +default HAVE_ACPI_TABLES=1 +## extra SSDT num +default ACPI_SSDTX_NUM=1 + +## +## Build code to export a CMOS option table +## +default HAVE_OPTION_TABLE=1 + +## +## Move the default LinuxBIOS cmos range off of AMD RTC registers +## +default LB_CKS_RANGE_START=49 +default LB_CKS_RANGE_END=122 +default LB_CKS_LOC=123 + +## +## Build code for SMP support +## Only worry about 2 micro processors +## +default CONFIG_SMP=1 +default CONFIG_MAX_CPUS=8 +default CONFIG_MAX_PHYSICAL_CPUS=4 +default CONFIG_LOGICAL_CPUS=1 + +default SERIAL_CPU_INIT=0 + +default ENABLE_APIC_EXT_ID=0 +default APIC_ID_OFFSET=0x8 +default LIFT_BSP_APIC_ID=1 + +#CHIP_NAME ? +default CONFIG_CHIP_NAME=1 + +#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. +#2G +#default HW_MEM_HOLE_SIZEK=0x200000 +#1G +default HW_MEM_HOLE_SIZEK=0x100000 +#512M +#default HW_MEM_HOLE_SIZEK=0x80000 + +#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy +#default HW_MEM_HOLE_SIZE_AUTO_INC=1 + +#Opteron K8 1G HT Support +default K8_HT_FREQ_1G_SUPPORT=1 + +#VGA Console +default CONFIG_CONSOLE_VGA=1 +default CONFIG_PCI_ROM_RUN=1 + +#HT Unit ID offset, default is 1, the typical one +default HT_CHAIN_UNITID_BASE=0xa + +#real SB Unit ID, default is 0x20, mean dont touch it at last +default HT_CHAIN_END_UNITID_BASE=0x6 + +#make the SB HT chain on bus 0, default is not (0) +default SB_HT_CHAIN_ON_BUS0=2 + +#only offset for SB chain?, default is yes(1) +#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 + +#allow capable device use that above 4G +#default CONFIG_PCI_64BIT_PREF_MEM=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xc8000 +default DCACHE_RAM_SIZE=0x08000 +default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000 +default CONFIG_USE_INIT=0 + +default CONFIG_AP_CODE_IN_CAR=1 +default MEM_TRAIN_SEQ=1 + +default WAIT_BEFORE_CPUS_INIT=1 + +## +## Build code to setup a generic IOAPIC +## +default CONFIG_IOAPIC=1 + +## +## Clean up the motherboard id strings +## +default MAINBOARD_PART_NUMBER="serengeti_cheetah" +default MAINBOARD_VENDOR="AMD" +default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022 +default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80 + +### +### LinuxBIOS layout values +### + +## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +default ROM_IMAGE_SIZE = 65536 + +## +## Use a small 8K stack +## +default STACK_SIZE=0x2000 + +## +## Use a small 32K heap +## +default HEAP_SIZE=0x8000 + +## +## Only use the option table in a normal image +## +default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) + +## +## LinuxBIOS C code runs at this location in RAM +## +default _RAMBASE=0x00100000 + +## +## Load the payload from the ROM +## +default CONFIG_ROM_STREAM = 1 + +#default CONFIG_COMPRESSED_ROM_STREAM = 1 + +### +### Defaults of options that you may want to override in the target config file +### + +## +## The default compiler +## +default CC="$(CROSS_COMPILE)gcc-3.4.5 -m32" +default HOSTCC="gcc-3.4.5" + +## +## Disable the gdb stub by default +## +default CONFIG_GDB_STUB=0 + +## +## The Serial Console +## + +# To Enable the Serial Console +default CONFIG_CONSOLE_SERIAL8250=1 + +## Select the serial console baud rate +default TTYS0_BAUD=115200 +#default TTYS0_BAUD=57600 +#default TTYS0_BAUD=38400 +#default TTYS0_BAUD=19200 +#default TTYS0_BAUD=9600 +#default TTYS0_BAUD=4800 +#default TTYS0_BAUD=2400 +#default TTYS0_BAUD=1200 + +# Select the serial console base port +default TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +default TTYS0_LCS=0x3 + +## +### Select the linuxBIOS loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +default DEFAULT_CONSOLE_LOGLEVEL=8 +## At a maximum only compile in this level of debugging +default MAXIMUM_CONSOLE_LOGLEVEL=8 + +## +## Select power on after power fail setting +default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" + +### End Options.lb +end
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/a =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/a (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/a 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,25 @@ +echo "Creating for ACPI hex for bus 1 Conf" +cd dx +iasl -tc dsdt_lb.dsl +rm DSDT.aml +mv dsdt_lb.hex ../dsdt.c +iasl -tc pci2.asl +rm SSDT2.aml +perl -e 's/AmlCode/AmlCode_ssdt2/g' -pi pci2.hex +mv pci2.hex ../ssdt2.c +cd .. +echo "Creating for ACPI hex for bus 0 Conf" +cd dx_bus0 +iasl -tc dsdt_lb.dsl +rm DSDT.aml +mv dsdt_lb.hex ../dsdt_bus0.c +iasl -tc pci2.asl +rm SSDT2.aml +perl -e 's/AmlCode/AmlCode_ssdt2/g' -pi pci2.hex +mv pci2.hex ../ssdt2_bus0.c +cd .. +echo "Creating ssdt" +iasl -tc ssdt_lb_x.dsl +rm SSDT.aml +perl -e 's/AmlCode/AmlCode_ssdt/g' -pi ssdt_lb_x.hex +mv ssdt_lb_x.hex ssdt.c
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/acpi_tables.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/acpi_tables.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/acpi_tables.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,268 @@ +/* + * Island Aruma ACPI support + * written by Stefan Reinauer stepan@openbios.org + * (C) 2005 Stefan Reinauer + * + * + * Copyright 2005 AMD + * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdk8_sysconf.h> + +#include "mb_sysconf.h" + +#define DUMP_ACPI_TABLES 0 + +#if DUMP_ACPI_TABLES == 1 +static void dump_mem(unsigned start, unsigned end) +{ + + unsigned i; + print_debug("dump_mem:"); + for(i=start;i<end;i++) { + if((i & 0xf)==0) { + printk_debug("\n%08x:", i); + } + printk_debug(" %02x", (unsigned char)*((unsigned char *)i)); + } + print_debug("\n"); + } +#endif + +extern unsigned char AmlCode[]; +extern unsigned char AmlCode_ssdt[]; + +#if ACPI_SSDTX_NUM >= 1 +extern unsigned char AmlCode_ssdt2[]; +//extern unsigned char AmlCode_ssdt3[]; +//extern unsigned char AmlCode_ssdt4[]; +//extern unsigned char AmlCode_ssdt5[]; +//extern unsigned char AmlCode_ssdt6[]; +//extern unsigned char AmlCode_ssdt7[]; +//extern unsigned char AmlCode_ssdt8[]; +#endif + +#define IO_APIC_ADDR 0xfec00000UL + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int gsi_base=0x18; + + struct mb_sysconf_t *m; + + m = sysconf.mb; + + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write 8111 IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8111, + IO_APIC_ADDR, 0); + + /* Write all 8131 IOAPICs */ + { + device_t dev; + struct resource *res; + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0]&0xff), 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_1, + res->base, gsi_base ); + gsi_base+=7; + + } + } + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0] & 0xff)+1, 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_2, + res->base, gsi_base ); + gsi_base+=7; + } + } + } + + current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *) + current, 0, 0, 2, 5 ); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edige-triggered, Active high*/ + + + /* create all subtables for processors */ + current = acpi_create_madt_lapic_nmis(current, 5, 1); + /* 1: LINT1 connect to NMI */ + + + return current; +} + +extern void get_bus_conf(void); + +extern void update_ssdt(void *ssdt); + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + acpi_header_t *ssdtx; + + unsigned char *AmlCode_ssdtx[HC_POSSIBLE_NUM]; + + int i; + + get_bus_conf(); //it will get sblk, pci1234, hcdn, and sbdn + + /* Align ACPI tables to 16byte */ + start = ( start + 0x0f ) & -0x10; + current = start; + + printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt); + acpi_write_rsdt(rsdt); + + /* + * We explicitly add these tables later on: + */ + printk_debug("ACPI: * HPET\n"); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdt,hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + printk_debug("ACPI: * MADT\n"); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current+=madt->header.length; + acpi_add_table(rsdt,madt); + + + /* SRAT */ + printk_debug("ACPI: * SRAT\n"); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current+=srat->header.length; + acpi_add_table(rsdt,srat); + + /* SLIT */ + printk_debug("ACPI: * SLIT\n"); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current+=slit->header.length; + acpi_add_table(rsdt,slit); + + /* SSDT */ + printk_debug("ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + current += ((acpi_header_t *)AmlCode_ssdt)->length; + memcpy((void *)ssdt, (void *)AmlCode_ssdt, ((acpi_header_t *)AmlCode_ssdt)->length); + //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c + update_ssdt((void*)ssdt); + /* recalculate checksum */ + ssdt->checksum = 0; + ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); + acpi_add_table(rsdt,ssdt); + +#if ACPI_SSDTX_NUM >= 1 + // we need to make ssdt2 match to PCI2 in pci2.asl,... pci1234[1] + AmlCode_ssdtx[1] = AmlCode_ssdt2; +// AmlCode_ssdtx[2] = AmlCode_ssdt3; +// AmlCode_ssdtx[3] = AmlCode_ssdt4; +// AmlCode_ssdtx[4] = AmlCode_ssdt5; +// AmlCode_ssdtx[5] = AmlCode_ssdt6; +// AmlCode_ssdtx[6] = AmlCode_ssdt7; +// AmlCode_ssdtx[7] = AmlCode_ssdt8; + + //same htio, but different possition? We may have to copy, change HCIN, and recalculate the checknum and add_table + + for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink + if((sysconf.pci1234[i] & 1) != 1 ) continue; + printk_debug("ACPI: * SSDT for PCI%d\n", i+1); //pci0 and pci1 are in dsdt + ssdtx = (acpi_header_t *)current; + current += ((acpi_header_t *)AmlCode_ssdtx[i])->length; + memcpy((void *)ssdtx, (void *)AmlCode_ssdtx[i], ((acpi_header_t *)AmlCode_ssdtx[i])->length); + acpi_add_table(rsdt,ssdtx); + } +#endif + + + /* FACS */ + printk_debug("ACPI: * FACS\n"); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* DSDT */ + printk_debug("ACPI: * DSDT\n"); + dsdt = (acpi_header_t *)current; + current += ((acpi_header_t *)AmlCode)->length; + memcpy((void *)dsdt,(void *)AmlCode, \ + ((acpi_header_t *)AmlCode)->length); + printk_debug("ACPI: * DSDT @ %08x Length %x\n",dsdt,dsdt->length); + + /* FDAT */ + printk_debug("ACPI: * FADT\n"); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt,facs,dsdt); + acpi_add_table(rsdt,fadt); + +#if DUMP_ACPI_TABLES == 1 + printk_debug("rsdp\n"); + dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); + + printk_debug("rsdt\n"); + dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); + + printk_debug("madt\n"); + dump_mem(madt, ((void *)madt) + madt->header.length); + + printk_debug("srat\n"); + dump_mem(srat, ((void *)srat) + srat->header.length); + + printk_debug("slit\n"); + dump_mem(slit, ((void *)slit) + slit->header.length); + + printk_debug("ssdt\n"); + dump_mem(ssdt, ((void *)ssdt) + ssdt->length); + + printk_debug("fadt\n"); + dump_mem(fadt, ((void *)fadt) + fadt->header.length); +#endif + + printk_info("ACPI: done.\n"); + return current; +} +
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/apc_auto.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/apc_auto.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/apc_auto.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,108 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#define RAMINIT_SYSINFO 1 +#define CACHE_AS_RAM_ADDRESS_DEBUG 0 + +#define SET_NB_CFG_54 1 + +//used by raminit +#define QRANK_DIMM_SUPPORT 1 + +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 + +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" + +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } +#endif +} +#endif + +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" + +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 + #include "lib/memcpy.c" +#endif + + +//#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" + +#include "northbridge/amd/amdk8/debug.c" + +#include "southbridge/amd/amd8111/amd8111_early_ctrl.c" + +#include "northbridge/amd/amdk8/amdk8_f.h" + +#include "cpu/x86/mtrr.h" +#include "cpu/amd/mtrr.h" +#include "cpu/x86/tsc.h" + +#include "northbridge/amd/amdk8/amdk8_f_pci.c" +#include "northbridge/amd/amdk8/raminit_f_dqs.c" + +#include "cpu/amd/dualcore/dualcore.c" + +void hardwaremain(int ret_addr) +{ + struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE + struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM + + struct node_core_id id; + + id = get_node_core_id_x(); + + print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n"); + + train_ram(id.nodeid, sysinfo, sysinfox); + + /* + go back, but can not use stack any more, because we only keep ret_addr and can not restore esp, and ebp + */ + + __asm__ volatile ( + "movl %0, %%edi\n\t" + "jmp *%%edi\n\t" + :: "a"(ret_addr) + ); + + + +} +struct eregs { + uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi; + uint32_t vector; + uint32_t error_code; + uint32_t eip; + uint32_t cs; + uint32_t eflags; +}; + +void x86_exception(struct eregs *info) +{ + do { + hlt(); + } while(1); +} + +
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/c 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,5 @@ +rm dsdt.c +rm ssdt2.c +rm dsdt_bus0.c +rm ssdt2_bus0.c +rm ssdt.c
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/cache_as_ram_auto.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/cache_as_ram_auto.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/cache_as_ram_auto.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,395 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + +#define RAMINIT_SYSINFO 1 +#define CACHE_AS_RAM_ADDRESS_DEBUG 0 + +#define SET_NB_CFG_54 1 + +//used by raminit +#define QRANK_DIMM_SUPPORT 1 + +//used by incoherent_ht +//#define K8_SCAN_PCI_BUS 1 +//#define K8_ALLOCATE_IO_RANGE 1 + + +//used by init_cpus and fidvid +#define K8_SET_FIDVID 1 +//if we want to wait for core1 done before DQS training, set it to 0 +#define K8_SET_FIDVID_CORE0_ONLY 1 + +//0: three for in bsp, only this one support F0_F1 workaround +//1: on every core0 +//2: one for on bsp +//#define MEM_TRAIN_SEQ 1 + +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 + +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" + +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } +#endif +} +#endif +#if USE_FAILOVER_IMAGE==0 +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include <cpu/amd/model_fxx_rev.h> +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#endif + + + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "cpu/x86/bist.h" + +#if USE_FAILOVER_IMAGE==0 + +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 + #include "lib/memcpy.c" +#endif +#include "northbridge/amd/amdk8/debug.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +#include "southbridge/amd/amd8111/amd8111_early_ctrl.c" + +static void memreset_setup(void) +{ + //GPIO on amd8111 to enable MEMRST ???? + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +#define SMBUS_HUB 0x18 + int ret,i; + unsigned device=(ctrl->channel0[0])>>8; + /* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/ + i=2; + do { + ret = smbus_write_byte(SMBUS_HUB, 0x01, device); + } while ((ret!=0) && (i-->0)); + + smbus_write_byte(SMBUS_HUB, 0x03, 0); +} +#if 0 +static inline void change_i2c_mux(unsigned device) +{ +#define SMBUS_HUB 0x18 + int ret, i; + print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\r\n"); + i=2; + do { + ret = smbus_write_byte(SMBUS_HUB, 0x01, device); + print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\r\n"); + } while ((ret!=0) && (i-->0)); + ret = smbus_write_byte(SMBUS_HUB, 0x03, 0); + print_debug("change_i2c_mux 2 ret="); print_debug_hex32(ret); print_debug("\r\n"); +} +#endif + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/amdk8_f.h" +#include "northbridge/amd/amdk8/coherent_ht.c" + +#include "northbridge/amd/amdk8/incoherent_ht.c" + +#include "northbridge/amd/amdk8/raminit_f.c" + +#include "sdram/generic_sdram.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#include "cpu/amd/dualcore/dualcore.c" + +#define RC0 ((1<<0)<<8) +#define RC1 ((1<<1)<<8) +#define RC2 ((1<<2)<<8) +#define RC3 ((1<<3)<<8) + +#define DIMM0 0x50 +#define DIMM1 0x51 +#define DIMM2 0x52 +#define DIMM3 0x53 +#define DIMM4 0x54 +#define DIMM5 0x55 +#define DIMM6 0x56 +#define DIMM7 0x57 + + +#include "cpu/amd/car/copy_and_run.c" +#include "cpu/amd/car/post_cache_as_ram.c" + +#include "cpu/amd/model_fxx/init_cpus.c" + +#include "cpu/amd/model_fxx/fidvid.c" +#endif + +#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1)) + +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) +{ + + unsigned last_boot_normal_x = last_boot_normal(); + + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the rom access for 4M */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ); + + fallback_image: +#if HAVE_FAILOVER_BOOT==1 + __asm__ volatile ("jmp __fallback_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ) +#endif + ; +} +#endif + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ +#if HAVE_FAILOVER_BOOT==1 + #if USE_FAILOVER_IMAGE==1 + failover_process(bist, cpu_init_detectedx); + #else + real_main(bist, cpu_init_detectedx); + #endif +#else + #if USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); + #endif + real_main(bist, cpu_init_detectedx); +#endif +} + +#if USE_FAILOVER_IMAGE==0 + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + //first node + RC0|DIMM0, RC0|DIMM2, 0, 0, + RC0|DIMM1, RC0|DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + //second node + RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6, + RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7, +#endif +#if CONFIG_MAX_PHYSICAL_CPUS > 2 + // third node + RC2|DIMM0, RC2|DIMM2, 0, 0, + RC2|DIMM1, RC2|DIMM3, 0, 0, + // four node + RC3|DIMM0, RC3|DIMM2, RC3|DIMM4, RC3|DIMM6, + RC3|DIMM1, RC3|DIMM3, RC3|DIMM5, RC3|DIMM7, +#endif + + }; + + struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); + + int needs_reset; int i; + unsigned bsp_apicid = 0; + + if (bist == 0) { + //It's the time to set ctrl in sysinfo now; + fill_mem_ctrl(CONFIG_MAX_PHYSICAL_CPUS, sysinfo->ctrl, spd_addr); + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + } + +// post_code(0x32); + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + +// dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n"); + + setup_serengeti_cheetah_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); + +#if MEM_TRAIN_SEQ == 1 + set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram +#endif + setup_coherent_ht_domain(); // routing table and start other core0 + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, + * So here need to make sure last core0 is started, esp for two way system, + * (there may be apic id conflicts in that case) + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + /* it will set up chains and store link pair for optimization later */ + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + +#if 0 + //it your CPU min fid is 1G, you can change HT to 1G and FID to max one time. + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); +#endif + +#if K8_SET_FIDVID == 1 + + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + + } + + enable_fid_change(); + + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + + init_fidvid_bsp(bsp_apicid); + + // show final fid and vid + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); + + } +#endif + +#if 1 + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + + // fidvid change will issue one LDTSTOP and the HT change will be effective too + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); + } +#endif + allow_all_aps_stop(bsp_apicid); + +#if 0 + //It's the time to set ctrl in sysinfo now; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); +#endif + + enable_smbus(); + +#if 0 + for(i=0;i<4;i++) { + activate_spd_rom(&cpu[i]); + dump_smbus_registers(); + } +#endif + +#if 0 + for(i=1;i<256;i<<=1) { + change_i2c_mux(i); + dump_smbus_registers(); + } +#endif + + memreset_setup(); + + //do we need apci timer, tsc...., only debug need it for better output + /* all ap stopped? */ +// init_timer(); // Need to use TMICT to synconize FID/VID + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + +#if 0 + print_pci_devices(); +#endif + +#if 0 +// dump_pci_devices(); + dump_pci_device_index_wait(PCI_DEV(0, 0x18, 2), 0x98); + dump_pci_device_index_wait(PCI_DEV(0, 0x19, 2), 0x98); +#endif + + post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now + +} +#endif
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/chip.h =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/chip.h (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/chip.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,6 @@ +extern struct chip_operations mainboard_amd_serengeti_cheetah_ops; + +struct mainboard_amd_serengeti_cheetah_config { +// int fixup_scsi; +// int fixup_vga; +};
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/cmos.layout =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/cmos.layout (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/cmos.layout 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,98 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 dual_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + +
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8111.asl =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8111.asl (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8111.asl 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,172 @@ +/* + * Copyright 2005 AMD + */ +//AMD8111 + Name (APIC, Package (0x04) + { + Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10},// 0x0004ffff : assusme 8131 is present + Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11}, + Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12}, + Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13} + }) + + Name (PICM, Package (0x04) + { + Package (0x04) { 0x0004FFFF, 0x00, _SB.PCI0.LNKA, 0x00}, + Package (0x04) { 0x0004FFFF, 0x01, _SB.PCI0.LNKB, 0x00}, + Package (0x04) { 0x0004FFFF, 0x02, _SB.PCI0.LNKC, 0x00}, + Package (0x04) { 0x0004FFFF, 0x03, _SB.PCI0.LNKD, 0x00} + }) + + Name (DNCG, Ones) + + Method (_PRT, 0, NotSerialized) + { + If (LEqual (^DNCG, Ones)) { + Store (DADD(_SB.PCI0.SBDN, 0x0001ffff), Local0) + // Update the Device Number according to SBDN + Store(Local0, Index (DeRefOf (Index (PICM, 0)), 0)) + Store(Local0, Index (DeRefOf (Index (PICM, 1)), 0)) + Store(Local0, Index (DeRefOf (Index (PICM, 2)), 0)) + Store(Local0, Index (DeRefOf (Index (PICM, 3)), 0)) + + Store(Local0, Index (DeRefOf (Index (APIC, 0)), 0)) + Store(Local0, Index (DeRefOf (Index (APIC, 1)), 0)) + Store(Local0, Index (DeRefOf (Index (APIC, 2)), 0)) + Store(Local0, Index (DeRefOf (Index (APIC, 3)), 0)) + + Store (0x00, ^DNCG) + + } + + If (LNot (PICF)) { + Return (PICM) + } + Else { + Return (APIC) + } + } + + Device (SBC3) + { + /* acpi smbus it should be 0x00040003 if 8131 present */ + Method (_ADR, 0, NotSerialized) + { + Return (DADD(_SB.PCI0.SBDN, 0x00010003)) + } + OperationRegion (PIRQ, PCI_Config, 0x56, 0x02) + Field (PIRQ, ByteAcc, Lock, Preserve) + { + PIBA, 8, + PIDC, 8 + } +/* + OperationRegion (TS3_, PCI_Config, 0xC4, 0x02) + Field (TS3_, DWordAcc, NoLock, Preserve) + { + PTS3, 16 + } +*/ + } + + Device (HPET) + { + Name (HPT, 0x00) + Name (_HID, EisaId ("PNP0103")) + Name (_UID, 0x00) + Method (_STA, 0, NotSerialized) + { + Return (0x0F) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0xFED00000, 0x00000400) + }) + Return (BUF0) + } + } + + Include ("amd8111_pic.asl") + + Include ("amd8111_isa.asl") + + Device (TP2P) + { + /* 8111 P2P and it should 0x00030000 when 8131 present*/ + Method (_ADR, 0, NotSerialized) + { + Return (DADD(_SB.PCI0.SBDN, 0x00000000)) + } + + Method (_PRW, 0, NotSerialized) + { + If (CondRefOf (_S3, Local0)) { Return (Package (0x02) { 0x08, 0x03 }) } + Else { Return (Package (0x02) { 0x08, 0x01 }) } + } + + Device (USB0) + { + Name (_ADR, 0x00000000) + Method (_PRW, 0, NotSerialized) + { + If (CondRefOf (_S3, Local0)) { Return (Package (0x02) { 0x0F, 0x03 }) } + Else { Return (Package (0x02) { 0x0F, 0x01 }) } + } + } + + Device (USB1) + { + Name (_ADR, 0x00000001) + Method (_PRW, 0, NotSerialized) + { + If (CondRefOf (_S3, Local0)) { Return (Package (0x02) { 0x0F, 0x03 }) } + Else { Return (Package (0x02) { 0x0F, 0x01 }) } + } + } + + Name (APIC, Package (0x0C) + { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, //USB + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }, + + Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10 }, //Slot 4 + Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13 }, + + Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x11 }, //Slot 3 + Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x10 } + }) + + Name (PICM, Package (0x0C) + { + Package (0x04) { 0x0000FFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, //USB + Package (0x04) { 0x0000FFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x03, _SB.PCI0.LNKD, 0x00 }, + + Package (0x04) { 0x0004FFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, //Slot 4 + Package (0x04) { 0x0004FFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0004FFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0004FFFF, 0x03, _SB.PCI0.LNKD, 0x00 }, + + Package (0x04) { 0x0005FFFF, 0x00, _SB.PCI0.LNKB, 0x00 }, //Slot 3 + Package (0x04) { 0x0005FFFF, 0x01, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x02, _SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x03, _SB.PCI0.LNKA, 0x00 } + }) + + Method (_PRT, 0, NotSerialized) + { + If (LNot (PICF)) { Return (PICM) } + Else { Return (APIC) } + } + } +
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8111_isa.asl =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8111_isa.asl (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8111_isa.asl 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,176 @@ +/* + * Copyright 2005 AMD + */ +//AMD8111 isa + + Device (ISA) + { + /* lpc 0x00040000 */ + Method (_ADR, 0, NotSerialized) + { + Return (DADD(_SB.PCI0.SBDN, 0x00010000)) + } + + OperationRegion (PIRY, PCI_Config, 0x51, 0x02) // LPC Decode Registers + Field (PIRY, ByteAcc, NoLock, Preserve) + { + Z000, 2, // Parallel Port Range + , 1, + ECP, 1, // ECP Enable + FDC1, 1, // Floppy Drive Controller 1 + FDC2, 1, // Floppy Drive Controller 2 + Offset (0x01), + Z001, 3, // Serial Port A Range + SAEN, 1, // Serial Post A Enabled + Z002, 3, // Serial Port B Range + SBEN, 1 // Serial Post B Enabled + } + + Device (PIC) + { + Name (_HID, EisaId ("PNP0000")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x0020, 0x0020, 0x01, 0x02) + IO (Decode16, 0x00A0, 0x00A0, 0x01, 0x02) + IRQ (Edge, ActiveHigh, Exclusive) {2} + }) + } + + Device (DMA1) + { + Name (_HID, EisaId ("PNP0200")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x0000, 0x0000, 0x01, 0x10) + IO (Decode16, 0x0080, 0x0080, 0x01, 0x10) + IO (Decode16, 0x00C0, 0x00C0, 0x01, 0x20) + DMA (Compatibility, NotBusMaster, Transfer16) {4} + }) + } + + Device (TMR) + { + Name (_HID, EisaId ("PNP0100")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x0040, 0x0040, 0x01, 0x04) + IRQ (Edge, ActiveHigh, Exclusive) {0} + }) + } + + Device (RTC) + { + Name (_HID, EisaId ("PNP0B00")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x0070, 0x0070, 0x01, 0x06) + IRQ (Edge, ActiveHigh, Exclusive) {8} + }) + } + + Device (SPKR) + { + Name (_HID, EisaId ("PNP0800")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x0061, 0x0061, 0x01, 0x01) + }) + } + + Device (COPR) + { + Name (_HID, EisaId ("PNP0C04")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x00F0, 0x00F0, 0x01, 0x10) + IRQ (Edge, ActiveHigh, Exclusive) {13} + }) + } + + Device (SYSR) + { + Name (_HID, EisaId ("PNP0C02")) + Name (_UID, 0x00) + Name (SYR1, ResourceTemplate () + { + IO (Decode16, 0x04D0, 0x04D0, 0x01, 0x02) //wrh092302 - added to report Thor NVRAM + IO (Decode16, 0x1100, 0x117F, 0x01, 0x80) //wrh092302 - added to report Thor NVRAM + IO (Decode16, 0x1180, 0x11FF, 0x01, 0x80) + IO (Decode16, 0x0010, 0x0010, 0x01, 0x10) + IO (Decode16, 0x0022, 0x0022, 0x01, 0x1E) + IO (Decode16, 0x0044, 0x0044, 0x01, 0x1C) + IO (Decode16, 0x0062, 0x0062, 0x01, 0x02) + IO (Decode16, 0x0065, 0x0065, 0x01, 0x0B) + IO (Decode16, 0x0076, 0x0076, 0x01, 0x0A) + IO (Decode16, 0x0090, 0x0090, 0x01, 0x10) + IO (Decode16, 0x00A2, 0x00A2, 0x01, 0x1E) + IO (Decode16, 0x00E0, 0x00E0, 0x01, 0x10) + IO (Decode16, 0x0B78, 0x0B78, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error + IO (Decode16, 0x0190, 0x0190, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error + }) + Method (_CRS, 0, NotSerialized) + { + Return (SYR1) + } + } + + Device (MEM) + { + Name (_HID, EisaId ("PNP0C02")) + Name (_UID, 0x01) + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0x000E0000, 0x00020000) // BIOS E4000-FFFFF + Memory32Fixed (ReadWrite, 0x000C0000, 0x00000000) // video BIOS c0000-c8404 + Memory32Fixed (ReadWrite, 0xFEC00000, 0x00001000) // I/O APIC + Memory32Fixed (ReadWrite, 0xFFC00000, 0x00380000) // LPC forwarded, 4 MB w/ROM + Memory32Fixed (ReadWrite, 0xFEE00000, 0x00001000) // Local APIC + Memory32Fixed (ReadWrite, 0xFFF80000, 0x00080000) // Overlay BIOS + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) //Overlay BIOS + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) //Overlay BIOS + }) + // Read the Video Memory length + CreateDWordField (BUF0, 0x14, CLEN) + CreateDWordField (BUF0, 0x10, CBAS) + + ShiftLeft (VGA1, 0x09, Local0) + Store (Local0, CLEN) + + Return (BUF0) + } + } + + Device (PS2M) + { + Name (_HID, EisaId ("PNP0F13")) + Name (_CRS, ResourceTemplate () + { + IRQNoFlags () {12} + }) + Method (_STA, 0, NotSerialized) + { + And (FLG0, 0x04, Local0) + If (LEqual (Local0, 0x04)) { Return (0x0F) } + Else { Return (0x00) } + } + } + + Device (PS2K) + { + Name (_HID, EisaId ("PNP0303")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {1} + }) + } + Include ("superio.asl") + + } +
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8111_pic.asl =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8111_pic.asl (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8111_pic.asl 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,360 @@ +/* + * Copyright 2005 AMD + */ +//AMD8111 pic LNKA B C D + + Device (LNKA) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x01) + Method (_STA, 0, NotSerialized) + { + And (_SB.PCI0.SBC3.PIBA, 0x0F, Local0) + If (LEqual (Local0, 0x00)) { Return (0x09) } //Disabled + Else { Return (0x0B) } //Enabled + } + + Method (_PRS, 0, NotSerialized) + { + Name (BUFA, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {3,5,10,11} + }) + Return (BUFA) + } + + Method (_DIS, 0, NotSerialized) + { + Store (0x01, Local3) + And (_SB.PCI0.SBC3.PIBA, 0x0F, Local1) + Store (Local1, Local2) + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local1) + } + + ShiftLeft (Local3, Local1, Local3) + Not (Local3, Local3) + And (_SB.PCI0.SBC3.PIBA, 0xF0, _SB.PCI0.SBC3.PIBA) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUFA, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateByteField (BUFA, 0x01, IRA1) + CreateByteField (BUFA, 0x02, IRA2) + Store (0x00, Local3) + Store (0x00, Local4) + And (_SB.PCI0.SBC3.PIBA, 0x0F, Local1) + If (LNot (LEqual (Local1, 0x00))) + { // Routing enable + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local2) + ShiftLeft (One, Local2, Local4) + } + Else + { + If (LGreater (Local1, 0x00)) + { + ShiftLeft (One, Local1, Local3) + } + } + + Store (Local3, IRA1) + Store (Local4, IRA2) + } + + Return (BUFA) + } + + Method (_SRS, 1, NotSerialized) + { + CreateByteField (Arg0, 0x01, IRA1) + CreateByteField (Arg0, 0x02, IRA2) + ShiftLeft (IRA2, 0x08, Local0) + Or (Local0, IRA1, Local0) + Store (0x00, Local1) + ShiftRight (Local0, 0x01, Local0) + While (LGreater (Local0, 0x00)) + { + Increment (Local1) + ShiftRight (Local0, 0x01, Local0) + } + + And (_SB.PCI0.SBC3.PIBA, 0xF0, _SB.PCI0.SBC3.PIBA) + Or (_SB.PCI0.SBC3.PIBA, Local1, _SB.PCI0.SBC3.PIBA) + } + } + + Device (LNKB) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x02) + Method (_STA, 0, NotSerialized) + { + And (_SB.PCI0.SBC3.PIBA, 0xF0, Local0) + If (LEqual (Local0, 0x00)) { Return (0x09) } + Else { Return (0x0B) } + } + + Method (_PRS, 0, NotSerialized) + { + Name (BUFB, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {3,5,10,11} + }) + Return (BUFB) + } + + Method (_DIS, 0, NotSerialized) + { + Store (0x01, Local3) + And (_SB.PCI0.SBC3.PIBA, 0xF0, Local1) + ShiftRight (Local1, 0x04, Local1) + Store (Local1, Local2) + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local1) + } + + ShiftLeft (Local3, Local1, Local3) + Not (Local3, Local3) + And (_SB.PCI0.SBC3.PIBA, 0x0F, _SB.PCI0.SBC3.PIBA) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUFB, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateByteField (BUFB, 0x01, IRB1) + CreateByteField (BUFB, 0x02, IRB2) + Store (0x00, Local3) + Store (0x00, Local4) + And (_SB.PCI0.SBC3.PIBA, 0xF0, Local1) + ShiftRight (Local1, 0x04, Local1) + If (LNot (LEqual (Local1, 0x00))) + { + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local2) + ShiftLeft (One, Local2, Local4) + } + Else + { + If (LGreater (Local1, 0x00)) + { + ShiftLeft (One, Local1, Local3) + } + } + + Store (Local3, IRB1) + Store (Local4, IRB2) + } + + Return (BUFB) + } + + Method (_SRS, 1, NotSerialized) + { + CreateByteField (Arg0, 0x01, IRB1) + CreateByteField (Arg0, 0x02, IRB2) + ShiftLeft (IRB2, 0x08, Local0) + Or (Local0, IRB1, Local0) + Store (0x00, Local1) + ShiftRight (Local0, 0x01, Local0) + While (LGreater (Local0, 0x00)) + { + Increment (Local1) + ShiftRight (Local0, 0x01, Local0) + } + + And (_SB.PCI0.SBC3.PIBA, 0x0F, _SB.PCI0.SBC3.PIBA) + ShiftLeft (Local1, 0x04, Local1) + Or (_SB.PCI0.SBC3.PIBA, Local1, _SB.PCI0.SBC3.PIBA) + } + } + + Device (LNKC) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x03) + Method (_STA, 0, NotSerialized) + { + And (_SB.PCI0.SBC3.PIDC, 0x0F, Local0) + If (LEqual (Local0, 0x00)) { Return (0x09) } + Else { Return (0x0B) } + } + + Method (_PRS, 0, NotSerialized) + { + Name (BUFA, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {3,5,10,11} + }) + Return (BUFA) + } + + Method (_DIS, 0, NotSerialized) + { + Store (0x01, Local3) + And (_SB.PCI0.SBC3.PIDC, 0x0F, Local1) + Store (Local1, Local2) + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local1) + } + + ShiftLeft (Local3, Local1, Local3) + Not (Local3, Local3) + And (_SB.PCI0.SBC3.PIDC, 0xF0, _SB.PCI0.SBC3.PIDC) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUFA, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateByteField (BUFA, 0x01, IRA1) + CreateByteField (BUFA, 0x02, IRA2) + Store (0x00, Local3) + Store (0x00, Local4) + And (_SB.PCI0.SBC3.PIDC, 0x0F, Local1) + If (LNot (LEqual (Local1, 0x00))) + { + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local2) + ShiftLeft (One, Local2, Local4) + } + Else + { + If (LGreater (Local1, 0x00)) + { + ShiftLeft (One, Local1, Local3) + } + } + + Store (Local3, IRA1) + Store (Local4, IRA2) + } + + Return (BUFA) + } + + Method (_SRS, 1, NotSerialized) + { + CreateByteField (Arg0, 0x01, IRA1) + CreateByteField (Arg0, 0x02, IRA2) + ShiftLeft (IRA2, 0x08, Local0) + Or (Local0, IRA1, Local0) + Store (0x00, Local1) + ShiftRight (Local0, 0x01, Local0) + While (LGreater (Local0, 0x00)) + { + Increment (Local1) + ShiftRight (Local0, 0x01, Local0) + } + + And (_SB.PCI0.SBC3.PIDC, 0xF0, _SB.PCI0.SBC3.PIDC) + Or (_SB.PCI0.SBC3.PIDC, Local1, _SB.PCI0.SBC3.PIDC) + } + } + + Device (LNKD) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x04) + Method (_STA, 0, NotSerialized) + { + And (_SB.PCI0.SBC3.PIDC, 0xF0, Local0) + If (LEqual (Local0, 0x00)) { Return (0x09) } + Else { Return (0x0B) } + } + + Method (_PRS, 0, NotSerialized) + { + Name (BUFB, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {3,5,10,11} + }) + Return (BUFB) + } + + Method (_DIS, 0, NotSerialized) + { + Store (0x01, Local3) + And (_SB.PCI0.SBC3.PIDC, 0xF0, Local1) + ShiftRight (Local1, 0x04, Local1) + Store (Local1, Local2) + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local1) + } + + ShiftLeft (Local3, Local1, Local3) + Not (Local3, Local3) + And (_SB.PCI0.SBC3.PIDC, 0x0F, _SB.PCI0.SBC3.PIDC) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUFB, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateByteField (BUFB, 0x01, IRB1) + CreateByteField (BUFB, 0x02, IRB2) + Store (0x00, Local3) + Store (0x00, Local4) + And (_SB.PCI0.SBC3.PIDC, 0xF0, Local1) + ShiftRight (Local1, 0x04, Local1) + If (LNot (LEqual (Local1, 0x00))) + { + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local2) + ShiftLeft (One, Local2, Local4) + } + Else + { + If (LGreater (Local1, 0x00)) + { + ShiftLeft (One, Local1, Local3) + } + } + + Store (Local3, IRB1) + Store (Local4, IRB2) + } + + Return (BUFB) + } + + Method (_SRS, 1, NotSerialized) + { + CreateByteField (Arg0, 0x01, IRB1) + CreateByteField (Arg0, 0x02, IRB2) + ShiftLeft (IRB2, 0x08, Local0) + Or (Local0, IRB1, Local0) + Store (0x00, Local1) + ShiftRight (Local0, 0x01, Local0) + While (LGreater (Local0, 0x00)) + { + Increment (Local1) + ShiftRight (Local0, 0x01, Local0) + } + + And (_SB.PCI0.SBC3.PIDC, 0x0F, _SB.PCI0.SBC3.PIDC) + ShiftLeft (Local1, 0x04, Local1) + Or (_SB.PCI0.SBC3.PIDC, Local1, _SB.PCI0.SBC3.PIDC) + } + } + +
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8131.asl =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8131.asl (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8131.asl 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,119 @@ +/* + * Copyright 2005 AMD + */ + + Device (PG0A) + { + /* 8132 pcix bridge*/ + Method (_ADR, 0, NotSerialized) + { + Return (DADD(GHCD(HCIN, 0), 0x00000000)) + } + + Method (_PRW, 0, NotSerialized) + { + If (CondRefOf (_S3, Local0)) { Return (Package (0x02) { 0x29, 0x03 }) } + Else { Return (Package (0x02) { 0x29, 0x01 }) } + } + + Name (APIC, Package (0x14) + { + // Slot A - PIRQ BCDA + Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x19 }, //Slot 2 + Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1A }, + Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x1B }, + Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x18 }, + + //Cypress Slot A - PIRQ BCDA + Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x19 }, //? + Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x1A }, + Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x1B }, + Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x18 }, + + //Cypress Slot B - PIRQ CDAB + Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x1A }, //? + Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x1B }, + Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x18 }, + Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x19 }, + + //Cypress Slot C - PIRQ DABC + Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x1B }, //? + Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x18 }, + Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x19 }, + Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x1A }, + + //Cypress Slot D - PIRQ ABCD + Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x18 }, //? + Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x19 }, + Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x1A }, + Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x1B } + }) + Name (PICM, Package (0x14) + { + Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LNKB, 0x00 },//Slot 2 + Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x02, _SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x03, _SB.PCI0.LNKA, 0x00 }, + + Package (0x04) { 0x0003FFFF, 0x00, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0003FFFF, 0x01, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0003FFFF, 0x02, _SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0003FFFF, 0x03, _SB.PCI0.LNKA, 0x00 }, + + Package (0x04) { 0x0004FFFF, 0x00, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0004FFFF, 0x01, _SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0004FFFF, 0x02, _SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x0004FFFF, 0x03, _SB.PCI0.LNKB, 0x00 }, + + Package (0x04) { 0x0005FFFF, 0x00, _SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x01, _SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x02, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x03, _SB.PCI0.LNKC, 0x00 }, + + Package (0x04) { 0x0006FFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x0006FFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0006FFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0006FFFF, 0x03, _SB.PCI0.LNKD, 0x00 } + }) + Method (_PRT, 0, NotSerialized) + { + If (LNot (PICF)) { Return (PICM) } + Else { Return (APIC) } + } + } + + Device (PG0B) + { + /* 8132 pcix bridge 2 */ + Method (_ADR, 0, NotSerialized) + { + Return (DADD(GHCD(HCIN, 0), 0x00010000)) + } + + Method (_PRW, 0, NotSerialized) + { + If (CondRefOf (_S3, Local0)) { Return (Package (0x02) { 0x22, 0x03 }) } + Else { Return (Package (0x02) { 0x22, 0x01 }) } + } + + Name (APIC, Package (0x04) + { + // Slot A - PIRQ ABCD + Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x1F },// Slot 1 + Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x20 }, + Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x21 }, + Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x22 } + }) + Name (PICM, Package (0x04) + { + Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LNKA, 0x00 },//Slot 1 + Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x03, _SB.PCI0.LNKD, 0x00 } + }) + Method (_PRT, 0, NotSerialized) + { + If (LNot (PICF)) { Return (PICM) } + Else { Return (APIC) } + } + }
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8151.asl =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8151.asl (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amd8151.asl 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,29 @@ +// AMD8151 + Device (AGPB) + { + Method (_ADR, 0, NotSerialized) + { + Return (DADD(GHCD(HCIN, 0), 0x00010000)) + } + + Name (APIC, Package (0x04) + { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 } + }) + Name (PICM, Package (0x04) + { + Package (0x04) { 0x0000FFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x03, _SB.PCI0.LNKD, 0x00 } + }) + Method (_PRT, 0, NotSerialized) + { + If (LNot (PICF)) { Return (PICM) } + Else { Return (APIC) } + } + } +
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amdk8_util.asl =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amdk8_util.asl (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/amdk8_util.asl 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,315 @@ +/* + * Copyright 2005 AMD + */ + +//AMD k8 util for BUSB and res range + + Scope (_SB) + { + + Name (OSTB, Ones) + Method (OSTP, 0, NotSerialized) + { + If (LEqual (^OSTB, Ones)) + { + Store (0x00, ^OSTB) + } + + Return (^OSTB) + } + + Method (SEQL, 2, Serialized) + { + Store (SizeOf (Arg0), Local0) + Store (SizeOf (Arg1), Local1) + If (LNot (LEqual (Local0, Local1))) { Return (Zero) } + + Name (BUF0, Buffer (Local0) {}) + Store (Arg0, BUF0) + Name (BUF1, Buffer (Local0) {}) + Store (Arg1, BUF1) + Store (Zero, Local2) + While (LLess (Local2, Local0)) + { + Store (DerefOf (Index (BUF0, Local2)), Local3) + Store (DerefOf (Index (BUF1, Local2)), Local4) + If (LNot (LEqual (Local3, Local4))) { Return (Zero) } + + Increment (Local2) + } + + Return (One) + } + + + Method (DADD, 2, NotSerialized) + { + Store( Arg1, Local0) + Store( Arg0, Local1) + Add( ShiftLeft(Local1,16), Local0, Local0) + Return (Local0) + } + + + Method (GHCE, 1, NotSerialized) // check if the HC enabled + { + Store (DerefOf (Index (_SB.PCI0.HCLK, Arg0)), Local1) + if(LEqual ( And(Local1, 0x01), 0x01)) { Return (0x0F) } + Else { Return (0x00) } + } + + Method (GHCN, 1, NotSerialized) // get the node num for the HC + { + Store (0x00, Local0) + Store (DerefOf (Index (_SB.PCI0.HCLK, Arg0)), Local1) + Store (ShiftRight( And (Local1, 0xf0), 0x04), Local0) + Return (Local0) + } + + Method (GHCL, 1, NotSerialized) // get the link num on node for the HC + { + Store (0x00, Local0) + Store (DerefOf (Index (_SB.PCI0.HCLK, Arg0)), Local1) + Store (ShiftRight( And (Local1, 0xf00), 0x08), Local0) + Return (Local0) + } + + Method (GHCD, 2, NotSerialized) // get the unit id base for the HT device in HC + { + Store (0x00, Local0) + Store (DerefOf (Index (_SB.PCI0.HCDN, Arg0)), Local1) + Store (Arg1, Local2) // Arg1 could be 3, 2, 1, 0 + Multiply (Local2, 0x08, Local2) // change to 24, 16, 8, 0 + Store (And (ShiftRight( Local1, Local2), 0xff), Local0) + Return (Local0) + } + + Method (GBUS, 2, NotSerialized) + { + Store (0x00, Local0) + While (LLess (Local0, 0x04)) + { + Store (DerefOf (Index (_SB.PCI0.BUSN, Local0)), Local1) + If (LEqual (And (Local1, 0x03), 0x03)) + { + If (LEqual (Arg0, ShiftRight (And (Local1, 0x70), 0x04))) + { + If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x0300), 0x08)))) + { + Return (ShiftRight (And (Local1, 0x00FF0000), 0x10)) + } + } + } + + Increment (Local0) + } + + Return (0x00) + } + + Method (GWBN, 2, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Address Space Granularity + 0x0000, // Address Range Minimum + 0x0000, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x0000,,,) + }) + CreateWordField (BUF0, 0x08, BMIN) + CreateWordField (BUF0, 0x0A, BMAX) + CreateWordField (BUF0, 0x0E, BLEN) + Store (0x00, Local0) + While (LLess (Local0, 0x04)) + { + Store (DerefOf (Index (_SB.PCI0.BUSN, Local0)), Local1) + If (LEqual (And (Local1, 0x03), 0x03)) + { + If (LEqual (Arg0, ShiftRight (And (Local1, 0x70), 0x04))) + { + If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x0300), 0x08)))) + { + Store (ShiftRight (And (Local1, 0x00FF0000), 0x10), BMIN) + Store (ShiftRight (Local1, 0x18), BMAX) + Subtract (BMAX, BMIN, BLEN) + Increment (BLEN) + Return (RTAG (BUF0)) + } + } + } + + Increment (Local0) + } + + Return (RTAG (BUF0)) + } + + Method (GMEM, 2, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, + 0x00000000, // Address Space Granularity + 0x00000000, // Address Range Minimum + 0x00000000, // Address Range Maximum + 0x00000000, // Address Translation Offset + 0x00000000,,, + , AddressRangeMemory, TypeStatic) + }) + CreateDWordField (BUF0, 0x0A, MMIN) + CreateDWordField (BUF0, 0x0E, MMAX) + CreateDWordField (BUF0, 0x16, MLEN) + Store (0x00, Local0) + Store (0x00, Local4) + Store (0x00, Local3) + While (LLess (Local0, 0x10)) + { + Store (DerefOf (Index (_SB.PCI0.MMIO, Local0)), Local1) + Increment (Local0) + Store (DerefOf (Index (_SB.PCI0.MMIO, Local0)), Local2) + If (LEqual (And (Local1, 0x03), 0x03)) + { + If (LEqual (Arg0, And (Local2, 0x07))) + { + If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local2, 0x30), 0x04)))) + { + Store (ShiftLeft (And (Local1, 0xFFFFFF00), 0x08), MMIN) + Store (ShiftLeft (And (Local2, 0xFFFFFF00), 0x08), MMAX) + Or (MMAX, 0xFFFF, MMAX) + Subtract (MMAX, MMIN, MLEN) + + If (Local4) + { + Concatenate (RTAG (BUF0), Local3, Local5) + Store (Local5, Local3) + } + Else + { + If (LOr (LAnd (LEqual (Arg1, 0xFF), LEqual (Arg0, 0x00)), LEqual (Arg1, _SB.PCI0.SBLK))) + { + Store (_SB.PCI0.TOM1, MMIN) + Subtract (MMAX, MMIN, MLEN) + Increment (MLEN) + } + + Store (RTAG (BUF0), Local3) + } + + Increment (Local4) + } + } + } + + Increment (Local0) + } + + If (LNot (Local4)) + { + Store (BUF0, Local3) + } + + Return (Local3) + } + + Method (GIOR, 2, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x00000000, // Address Space Granularity + 0x00000000, // Address Range Minimum + 0x00000000, // Address Range Maximum + 0x00000000, // Address Translation Offset + 0x00000000,,, + , TypeStatic) + }) + CreateDWordField (BUF0, 0x0A, PMIN) + CreateDWordField (BUF0, 0x0E, PMAX) + CreateDWordField (BUF0, 0x16, PLEN) + Store (0x00, Local0) + Store (0x00, Local4) + Store (0x00, Local3) + While (LLess (Local0, 0x08)) + { + Store (DerefOf (Index (_SB.PCI0.PCIO, Local0)), Local1) + Increment (Local0) + Store (DerefOf (Index (_SB.PCI0.PCIO, Local0)), Local2) + If (LEqual (And (Local1, 0x03), 0x03)) + { + If (LEqual (Arg0, And (Local2, 0x07))) + { + If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local2, 0x30), 0x04)))) + { + Store (And (Local1, 0x01FFF000), PMIN) + Store (And (Local2, 0x01FFF000), PMAX) + Or (PMAX, 0x0FFF, PMAX) + Subtract (PMAX, PMIN, PLEN) + Increment (PLEN) + + If (Local4) + { + Concatenate (RTAG (BUF0), Local3, Local5) + Store (Local5, Local3) + } + Else + { + If (LGreater (PMAX, PMIN)) + { + If (LOr (LAnd (LEqual (Arg1, 0xFF), LEqual (Arg0, 0x00)), LEqual (Arg1, _SB.PCI0.SBLK))) + { + Store (0x0D00, PMIN) + Subtract (PMAX, PMIN, PLEN) + Increment (PLEN) + } + + Store (RTAG (BUF0), Local3) + Increment (Local4) + } + + If (And (Local1, 0x10)) + { + Store (0x03B0, PMIN) + Store (0x03DF, PMAX) + Store (0x30, PLEN) + If (Local4) + { + Concatenate (RTAG (BUF0), Local3, Local5) + Store (Local5, Local3) + } + Else + { + Store (RTAG (BUF0), Local3) + } + } + } + + Increment (Local4) + } + } + } + + Increment (Local0) + } + + If (LNot (Local4)) + { + Store (RTAG (BUF0), Local3) + } + + Return (Local3) + } + + Method (RTAG, 1, NotSerialized) + { + Store (Arg0, Local0) + Store (SizeOf (Local0), Local1) + Subtract (Local1, 0x02, Local1) + Multiply (Local1, 0x08, Local1) + CreateField (Local0, 0x00, Local1, RETB) + Store (RETB, Local2) + Return (Local2) + } + } +
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/dsdt_lb.dsl =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/dsdt_lb.dsl (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/dsdt_lb.dsl 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,212 @@ +/* + * Copyright 2005 AMD + */ +DefinitionBlock ("DSDT.aml", "DSDT", 1, "AMD-K8", "AMDACPI", 100925440) +{ + Scope (_PR) + { + Processor (CPU0, 0x00, 0x0000C010, 0x06) {} + Processor (CPU1, 0x01, 0x00000000, 0x00) {} + Processor (CPU2, 0x02, 0x00000000, 0x00) {} + Processor (CPU3, 0x03, 0x00000000, 0x00) {} + + } + + Method (FWSO, 0, NotSerialized) { } + + Name (_S0, Package (0x04) { 0x00, 0x00, 0x00, 0x00 }) + Name (_S1, Package (0x04) { 0x01, 0x01, 0x01, 0x01 }) + Name (_S3, Package (0x04) { 0x05, 0x05, 0x05, 0x05 }) + Name (_S5, Package (0x04) { 0x07, 0x07, 0x07, 0x07 }) + + Scope (_SB) + { + Device (PCI0) + { + /* BUS0 root bus */ + + External (BUSN) + External (MMIO) + External (PCIO) + External (SBLK) + External (TOM1) + External (HCLK) + External (SBDN) + External (HCDN) + External (CBST) + + + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00180000) + Name (_UID, 0x01) + + Name (HCIN, 0x00) // HC1 + + Method (_BBN, 0, NotSerialized) + { + Return (GBUS (GHCN(HCIN), GHCL(HCIN))) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + IO (Decode16, 0x0CF8, 0x0CF8, 0x01, 0x08) //CF8-CFFh + IO (Decode16, 0xC000, 0xC000, 0x01, 0x80) //8000h + IO (Decode16, 0xC080, 0xC080, 0x01, 0x80) //8080h + + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x8100, // Address Range Minimum + 0xFFFF, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x7F00,,, + , TypeStatic) //8100h-FFFFh + + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, // Address Space Granularity + 0x000C0000, // Address Range Minimum + 0x00000000, // Address Range Maximum + 0x00000000, // Address Translation Offset + 0x00000000,,, + , AddressRangeMemory, TypeStatic) //Video BIOS A0000h-C7FFFh + + Memory32Fixed (ReadWrite, 0x000D8000, 0x00004000)//USB HC D8000-DBFFF + + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x0000, // Address Range Minimum + 0x03AF, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x03B0,,, + , TypeStatic) //0-CF7h + + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x03E0, // Address Range Minimum + 0x0CF7, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x0918,,, + , TypeStatic) //0-CF7h + }) + _SB.OSTP () + CreateDWordField (BUF0, 0x3E, VLEN) + CreateDWordField (BUF0, 0x36, VMAX) + CreateDWordField (BUF0, 0x32, VMIN) + ShiftLeft (VGA1, 0x09, Local0) + Add (VMIN, Local0, VMAX) + Decrement (VMAX) + Store (Local0, VLEN) + Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) + Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) + Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) + Return (Local3) + } + + Include ("pci0_hc.asl") + + } + Device (PCI1) + { + Name (_HID, "PNP0A03") + Name (_ADR, 0x00000000) + Name (_UID, 0x02) + Method (_STA, 0, NotSerialized) + { + Return (_SB.PCI0.CBST) + } + Name (_BBN, 0x00) + } + + + } + + Scope (_GPE) + { + Method (_L08, 0, NotSerialized) + { + Notify (_SB.PCI0, 0x02) //PME# Wakeup + } + + Method (_L0F, 0, NotSerialized) + { + Notify (_SB.PCI0.TP2P.USB0, 0x02) //USB Wakeup + } + + Method (_L22, 0, NotSerialized) // GPIO18 (LID) - Pogo 0 Bridge B + { + Notify (_SB.PCI0.PG0B, 0x02) + } + + Method (_L29, 0, NotSerialized) // GPIO25 (Suspend) - Pogo 0 Bridge A + { + Notify (_SB.PCI0.PG0A, 0x02) + } + } + + Method (_PTS, 1, NotSerialized) + { + Or (Arg0, 0xF0, Local0) + Store (Local0, DBG1) + } +/* + Method (_WAK, 1, NotSerialized) + { + Or (Arg0, 0xE0, Local0) + Store (Local0, DBG1) + } +*/ + Name (PICF, 0x00) //Flag Variable for PIC vs. I/O APIC Mode + Method (_PIC, 1, NotSerialized) //PIC Flag and Interface Method + { + Store (Arg0, PICF) + } + + OperationRegion (DEBG, SystemIO, 0x80, 0x01) + Field (DEBG, ByteAcc, Lock, Preserve) + { + DBG1, 8 + } + + OperationRegion (EXTM, SystemMemory, 0x000FF83C, 0x04) + Field (EXTM, WordAcc, Lock, Preserve) + { + AMEM, 32 + } + + OperationRegion (VGAM, SystemMemory, 0x000C0002, 0x01) + Field (VGAM, ByteAcc, Lock, Preserve) + { + VGA1, 8 + } + + OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100) + Field (GRAM, ByteAcc, Lock, Preserve) + { + Offset (0x10), + FLG0, 8 + } + + OperationRegion (GSTS, SystemIO, 0xC028, 0x02) + Field (GSTS, ByteAcc, NoLock, Preserve) + { + , 4, + IRQR, 1 + } + + OperationRegion (Z007, SystemIO, 0x21, 0x01) + Field (Z007, ByteAcc, NoLock, Preserve) + { + Z008, 8 + } + + OperationRegion (Z009, SystemIO, 0xA1, 0x01) + Field (Z009, ByteAcc, NoLock, Preserve) + { + Z00A, 8 + } + + Include ("amdk8_util.asl") + +} +
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/pci0_hc.asl =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/pci0_hc.asl (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/pci0_hc.asl 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,2 @@ + Include ("amd8111.asl") //real SB at first + Include ("amd8131.asl")
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/pci2.asl =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/pci2.asl (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/pci2.asl 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,68 @@ +/* + * Copyright 2005 AMD + */ +DefinitionBlock ("SSDT2.aml", "SSDT", 1, "AMD-K8", "AMDACPI", 100925440) +{ + Scope (_SB) + { + External (DADD, MethodObj) + External (GHCE, MethodObj) + External (GHCN, MethodObj) + External (GHCL, MethodObj) + External (GHCD, MethodObj) + External (GNUS, MethodObj) + External (GIOR, MethodObj) + External (GMEM, MethodObj) + External (GWBN, MethodObj) + External (GBUS, MethodObj) + + External (PICF) + + External (_SB.PCI0.LNKA, DeviceObj) + External (_SB.PCI0.LNKB, DeviceObj) + External (_SB.PCI0.LNKC, DeviceObj) + External (_SB.PCI0.LNKD, DeviceObj) + + Device (PCI2) + { + + // BUS ? Second HT Chain + Name (HCIN, 0x01) // HC2 + + Name (_HID, "PNP0A03") + + Method (_ADR, 0, NotSerialized) //Fake bus should be 0 + { + Return (DADD(GHCN(HCIN), 0x00180000)) + } + + Name (_UID, 0x03) + + Method (_BBN, 0, NotSerialized) + { + Return (GBUS (GHCN(HCIN), GHCL(HCIN))) + } + + Method (_STA, 0, NotSerialized) + { + Return (_SB.GHCE(HCIN)) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () { }) + Store( GHCN(HCIN), Local4) + Store( GHCL(HCIN), Local5) + + Concatenate (_SB.GIOR (Local4, Local5), BUF0, Local1) + Concatenate (_SB.GMEM (Local4, Local5), Local1, Local2) + Concatenate (_SB.GWBN (Local4, Local5), Local2, Local3) + Return (Local3) + } + + Include ("pci2_hc.asl") + } + } + +} +
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/pci2_hc.asl =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/pci2_hc.asl (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/pci2_hc.asl 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1 @@ + Include ("amd8151.asl")
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/superio.asl =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/superio.asl (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/dx/superio.asl 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1 @@ +// Include ("w83627hf.asl")
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/fadt.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/fadt.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/fadt.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,149 @@ +/* + * ACPI - create the Fixed ACPI Description Tables (FADT) + * (C) Copyright 2005 Stefan Reinauer stepan@openbios.org + */ + +#include <string.h> +#include <console/console.h> +#include <arch/acpi.h> + +extern unsigned pm_base; /* pm_base should be set in sb acpi */ + +void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){ + + acpi_header_t *header=&(fadt->header); + + printk_debug("pm_base: 0x%04x\n", pm_base); + + /* Prepare the header */ + memset((void *)fadt,0,sizeof(acpi_fadt_t)); + memcpy(header->signature,"FACP",4); + header->length = 244; + header->revision = 1; + memcpy(header->oem_id,OEM_ID,6); + memcpy(header->oem_table_id,"LXBACPI ",8); + memcpy(header->asl_compiler_id,ASLC,4); + header->asl_compiler_revision=0; + + fadt->firmware_ctrl=(u32)facs; + fadt->dsdt= (u32)dsdt; + fadt->res1=0x0; + // 3=Workstation,4=Enterprise Server, 7=Performance Server + fadt->preferred_pm_profile=0x03; + fadt->sci_int=9; + // disable system management mode by setting to 0: + fadt->smi_cmd = 0;//pm_base+0x2f; + fadt->acpi_enable = 0xf0; + fadt->acpi_disable = 0xf1; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0xe2; + + fadt->pm1a_evt_blk = pm_base; + fadt->pm1b_evt_blk = 0x0000; + fadt->pm1a_cnt_blk = pm_base+0x04; + fadt->pm1b_cnt_blk = 0x0000; + fadt->pm2_cnt_blk = 0x0000; + fadt->pm_tmr_blk = pm_base+0x08; + fadt->gpe0_blk = pm_base+0x20; + fadt->gpe1_blk = pm_base+0xb0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 0; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 4; + fadt->gpe1_blk_len = 8; + fadt->gpe1_base = 16; + + fadt->cst_cnt = 0xe3; + fadt->p_lvl2_lat = 101; + fadt->p_lvl3_lat = 1001; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0; // 0x7d these have to be + fadt->mon_alrm = 0; // 0x7e added to cmos.layout + fadt->century = 0; // 0x7f to make rtc alrm work + fadt->iapc_boot_arch = 0x3; // See table 5-11 + fadt->flags = 0x25; + + fadt->res2 = 0; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (u32)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (u32)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pm_base; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 4; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pm_base+4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 2; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = 0x0; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pm_base+0x08; + fadt->x_pm_tmr_blk.addrh = 0x0; + + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 32; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pm_base+0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 64; + fadt->x_gpe1_blk.bit_offset = 16; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = pm_base+0xb0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); + +}
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,140 @@ +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/dualcore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> + +#include "mb_sysconf.h" + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +struct mb_sysconf_t mb_sysconf; + +static unsigned pci1234x[] = +{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; +static unsigned hcdnx[] = +{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + +extern void get_sblk_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + + device_t dev; + int i; + struct mb_sysconf_t *m; + + if(get_bus_conf_done == 1) return; //do it only once + + get_bus_conf_done = 1; + + sysconf.mb = &mb_sysconf; + + m = sysconf.mb; + + sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; + m->sbdn3 = sysconf.hcdn[0] & 0xff; + m->sbdn5 = sysconf.hcdn[1] & 0xff; + + m->bus_8132_0 = (sysconf.pci1234[0] >> 16) & 0xff; + m->bus_8111_0 = m->bus_8132_0; + + /* 8111 */ + dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); + if (dev) { + m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE + m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + m->bus_isa++; +// printk_debug("bus_isa=%d\n",bus_isa); +#endif + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8111_0, sysconf.sbdn); + } + + /* 8132-1 */ + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3,0)); + if (dev) { + m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3); + } + + /* 8132-2 */ + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3+1,0)); + if (dev) { + m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + m->bus_isa++; +// printk_debug("bus_isa=%d\n",bus_isa); +#endif + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3+1); + } + + /* HT chain 1 */ + if((sysconf.pci1234[1] & 0x1) == 1) { + m->bus_8151_0 = (sysconf.pci1234[1] >> 16) & 0xff; + /* 8151 */ + dev = dev_find_slot(m->bus_8151_0, PCI_DEVFN(m->sbdn5+1, 0)); + + if (dev) { + m->bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +// printk_debug("bus_8151_1=%d\n",bus_8151_1); + m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + m->bus_isa++; + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8151_0, m->sbdn5+1); + } + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + m->apicid_8111 = apicid_base+0; + m->apicid_8132_1 = apicid_base+1; + m->apicid_8132_2 = apicid_base+2; +}
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/irq_tables.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/irq_tables.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/irq_tables.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,139 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdk8_sysconf.h> + +#include "mb_sysconf.h" + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + + +extern void get_bus_conf(void); + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + + uint8_t sum=0; + int i; + + struct mb_sysconf_t *m; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + + m = sysconf.mb; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = m->bus_8111_0; + pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1022; + pirq->rtr_device = 0x746b; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; + + { + device_t dev; + dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn+1,3)); + if (dev) { + /* initialize PCI interupts - these assignments depend + on the PCB routing of PINTA-D + + PINTA = IRQ3 + PINTB = IRQ5 + PINTC = IRQ10 + PINTD = IRQ11 + */ + pci_write_config16(dev, 0x56, 0xba53); + } + } + +//pci bridge + printk_debug("setting Onboard AMD Southbridge \n"); + static const unsigned char slotIrqs_1_4[4] = { 3, 5, 10, 11 }; + pci_assign_irqs(m->bus_8111_0, sysconf.sbdn+1, slotIrqs_1_4); + write_pirq_info(pirq_info, m->bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + printk_debug("setting Onboard AMD USB \n"); + static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 11}; + pci_assign_irqs(m->bus_8111_1, 0, slotIrqs_8111_1_0); + write_pirq_info(pirq_info, m->bus_8111_1,0, 0, 0, 0, 0, 0, 0, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + +//pcix bridge +// write_pirq_info(pirq_info, m->bus_8132_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); +// pirq_info++; slot_num++; + + if(sysconf.pci1234[1] & 0xf) { + //agp bridge + write_pirq_info(pirq_info, m->bus_8151_0, (m->sbdn5<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + } + + pirq_info++; slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk_info("done.\n"); + + return (unsigned long) pirq_info; + +}
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/mainboard.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/mainboard.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/mainboard.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,12 @@ +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "chip.h" + +#if CONFIG_CHIP_NAME == 1 +struct chip_operations mainboard_amd_serengeti_cheetah_ops = { + CHIP_NAME("AMD serengeti_cheetah mainboard") +}; +#endif
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/mb_sysconf.h =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/mb_sysconf.h (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/mb_sysconf.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,23 @@ +#ifndef MB_SYSCONF_H + +#define MB_SYSCONF_H + +struct mb_sysconf_t { + unsigned char bus_isa; + unsigned char bus_8132_0; + unsigned char bus_8132_1; + unsigned char bus_8132_2; + unsigned char bus_8111_0; + unsigned char bus_8111_1; + unsigned char bus_8151_0; + unsigned char bus_8151_1; + unsigned apicid_8111; + unsigned apicid_8132_1; + unsigned apicid_8132_2; + + unsigned sbdn3; + unsigned sbdn5; +}; + +#endif +
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/mptable.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/mptable.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/mptable.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,145 @@ +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/dualcore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> +#include "mb_sysconf.h" + +extern void get_bus_conf(void); + +void *smp_write_config_table(void *v) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "AMD "; + static const char productid[12] = "SERENGETI "; + struct mp_config_table *mc; + + unsigned char bus_num; + int i; + struct mb_sysconf_t *m; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); + + get_bus_conf(); + + m = sysconf.mb; + +/*Bus: Bus ID Type*/ + /* define bus and isa numbers */ + for(bus_num = 0; bus_num < m->bus_isa; bus_num++) { + smp_write_bus(mc, bus_num, "PCI "); + } + smp_write_bus(mc, m->bus_isa, "ISA "); + +/*I/O APICs: APIC ID Version State Address*/ + smp_write_ioapic(mc, m->apicid_8111, 0x11, 0xfec00000); //8111 + { + device_t dev; + struct resource *res; + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3, 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, m->apicid_8132_1, 0x11, res->base); + } + } + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3+1, 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, m->apicid_8132_2, 0x11, res->base); + } + } + } + +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_8111, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x1, m->apicid_8111, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_8111, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x3, m->apicid_8111, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x4, m->apicid_8111, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x5, m->apicid_8111, 0x5); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x6, m->apicid_8111, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x7, m->apicid_8111, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x8, m->apicid_8111, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x9, m->apicid_8111, 0x9); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xc, m->apicid_8111, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xd, m->apicid_8111, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_8111, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_8111, 0xf); +//??? What + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_0, ((sysconf.sbdn+1)<<2)|3, m->apicid_8111, 0x13); + +// Onboard AMD USB + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (0<<2)|3, m->apicid_8111, 0x13); + + if(sysconf.pci1234[1] & 0xf) { + // Slot AGP + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8151_1, 0x0, m->apicid_8111, 0x11); + } + +//Slot 3 PCI 32 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (5<<2)|i, m->apicid_8111, 0x10 + (1+i)%4); //16 + } + + +//Slot 4 PCI 32 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (4<<2)|i, m->apicid_8111, 0x10 + (0+i)%4); //16 + } + + +//Slot 1 PCI-X 133/100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_2, (1<<2)|i, m->apicid_8132_2, (0+i)%4); // + } + + +//Slot 2 PCI-X 133/100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_1, (1<<2)|i, m->apicid_8132_1, (1+i)%4); //25 + } + + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v); +}
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/readme_acpi.txt =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/readme_acpi.txt (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/readme_acpi.txt 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,30 @@ +At this time, For acpi support We got +1. support AMK K8 SRAT --- dynamically (LinuxBIOS run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c) +2. support MADT ---- dynamically (LinuxBIOS run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c , src/mainboard/amd/serengeti_cheetah/acpi_tables.c) +3. support DSDT ---- dynamically (Compile time, LinuxBIOS run-time, ACPI run-time) (src/mainboard/amd/serengeti_cheetah/{dx/*, get_bus_conf.c}, src/northbridge/amd/amdk8/get_sblk_pci1234.c) +4. Chipset support: amd8111, amd8132 + +The developers need to change for different MB + +Change dx/dsdt_lb.dsl, according to MB layout + pci1, pci2, pci3, pci4, ...., pci8 + if there is HT-IO board, may use pci2.asl.... to create ssdt2.c, and ssdt3,c and ssdt4.c, ....ssdt8.c + +Change acpi_tables.c + sbdn: Real SB device Num. for 8111 =3 or 1 depend if 8131 presents. ---- Actually you don't need to change it, it is LinuxBIOS run-time configurable now. + if there is HT-IO board, need to adjust SSDTX_NUM...., and preset pci1234 array. acpi_tables.c will decide to put the SSDT on the RSDT or not according if the HT-IO board is installed + +Regarding pci bridge apic and pic + need to modify entries amd8111.asl and amd8131.asl and amd8151.asl.... acording to your MB laybout, it is like that in mptable.c + +About other chipsets, need to develop their special asl such as + ck804.asl --- NB ck804 + bcm5785.asl or bcm5780.asl ---- Serverworks HT1000/HT2000 + +use a to create hex file +use c to delele hex file + +yhlu + +09/18/2005 +
Added: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/resourcemap.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/resourcemap.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah/resourcemap.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,265 @@ +/* + * AMD serengeti_cheetah needs a different resource map + * + */ + +static void setup_serengeti_cheetah_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x08070013, // AMD 8151 on link0 of CPU 1 + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = sizeof(register_values)/sizeof(register_values[0]); + setup_resource_map(register_values, max); +} +
Modified: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_leopard/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_leopard/Config.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_leopard/Config.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -56,14 +56,14 @@ #if HAVE_ACPI_TABLES # object acpi_tables.o # object fadt.o -# if K8_SB_HT_CHAIN_ON_BUS0 +# if SB_HT_CHAIN_ON_BUS0 # object dsdt_bus0.o # else # object dsdt.o # end # object ssdt.o # if ACPI_SSDTX_NUM -# if K8_SB_HT_CHAIN_ON_BUS0 +# if SB_HT_CHAIN_ON_BUS0 # object ssdt2_bus0.o # else # object ssdt2.o @@ -74,7 +74,7 @@ if HAVE_ACPI_TABLES object acpi_tables.o object fadt.o - if K8_SB_HT_CHAIN_ON_BUS0 + if SB_HT_CHAIN_ON_BUS0 makerule dsdt.c depends "$(MAINBOARD)/dx_bus0/dsdt_lb.dsl" action "/usr/sbin/iasl -tc $(MAINBOARD)/dx_bus0/dsdt_lb.dsl" @@ -98,7 +98,7 @@ object ./ssdt.o
if ACPI_SSDTX_NUM - if K8_SB_HT_CHAIN_ON_BUS0 + if SB_HT_CHAIN_ON_BUS0 makerule ssdt2.c depends "$(MAINBOARD)/dx/pci2.asl" action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/pci2.asl"
Modified: trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_leopard/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_leopard/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/amd/serengeti_leopard/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -54,13 +54,13 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK -uses K8_HW_MEM_HOLE_SIZE_AUTO_INC +uses HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZE_AUTO_INC uses K8_HT_FREQ_1G_SUPPORT
uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE -uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
uses USE_DCACHE_RAM @@ -152,14 +152,14 @@
#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. #2G -default K8_HW_MEM_HOLE_SIZEK=0x200000 +default HW_MEM_HOLE_SIZEK=0x200000 #1G -#default K8_HW_MEM_HOLE_SIZEK=0x100000 +#default HW_MEM_HOLE_SIZEK=0x100000 #512M -#default K8_HW_MEM_HOLE_SIZEK=0x80000 +#default HW_MEM_HOLE_SIZEK=0x80000
#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy -#default K8_HW_MEM_HOLE_SIZE_AUTO_INC=1 +#default HW_MEM_HOLE_SIZE_AUTO_INC=1
#Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 @@ -175,7 +175,7 @@ default HT_CHAIN_END_UNITID_BASE=0x1
#make the SB HT chain on bus 0 -default K8_SB_HT_CHAIN_ON_BUS0=1 +default SB_HT_CHAIN_ON_BUS0=1
#allow capable device use that above 4G #default CONFIG_PCI_64BIT_PREF_MEM=1 @@ -186,7 +186,7 @@ default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcc000 default DCACHE_RAM_SIZE=0x4000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0
## ## Build code to setup a generic IOAPIC
Modified: trunk/LinuxBIOSv2/src/mainboard/arima/hdama/auto.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/arima/hdama/auto.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/arima/hdama/auto.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -12,7 +12,6 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" #include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -22,7 +21,6 @@ #include "superio/NSC/pc87360/pc87360_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
@@ -141,7 +139,9 @@
#include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "sdram/generic_sdram.c" +#include "cpu/amd/dualcore/dualcore.c" #include "northbridge/amd/amdk8/resourcemap.c" #include "debug.c"
Modified: trunk/LinuxBIOSv2/src/mainboard/broadcom/blast/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/broadcom/blast/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/broadcom/blast/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -53,10 +53,10 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE -uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_ON_BUS0
uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -128,7 +128,7 @@ default CONFIG_CHIP_NAME=1
#1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console #default CONFIG_CONSOLE_VGA=1 @@ -141,7 +141,7 @@ default HT_CHAIN_END_UNITID_BASE=0x1
#make the SB HT chain on bus 0 -default K8_SB_HT_CHAIN_ON_BUS0=1 +default SB_HT_CHAIN_ON_BUS0=1
## ## enable CACHE_AS_RAM specifics
Modified: trunk/LinuxBIOSv2/src/mainboard/ibm/e325/auto.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/ibm/e325/auto.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/ibm/e325/auto.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -13,7 +13,6 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -25,7 +24,6 @@ #include "superio/NSC/pc87366/pc87366_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1)
@@ -125,8 +123,10 @@ #include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "sdram/generic_sdram.c" #include "mainboard/ibm/e325/resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c"
#define FIRST_CPU 1 #define SECOND_CPU 1
Modified: trunk/LinuxBIOSv2/src/mainboard/ibm/e326/auto.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/ibm/e326/auto.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/ibm/e326/auto.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -13,7 +13,6 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -25,7 +24,6 @@ #include "superio/NSC/pc87366/pc87366_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1)
@@ -125,8 +123,10 @@ #include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "sdram/generic_sdram.c" #include "mainboard/ibm/e326/resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c"
#define FIRST_CPU 1 #define SECOND_CPU 1
Modified: trunk/LinuxBIOSv2/src/mainboard/newisys/khepri/auto.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/newisys/khepri/auto.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/newisys/khepri/auto.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -18,12 +18,10 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include <cpu/amd/model_fxx_rev.h> #include "superio/NSC/pc87360/pc87360_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c"
#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
@@ -80,11 +78,13 @@ #include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c"
#include "sdram/generic_sdram.c"
/* newisys khepri does not want the default */ #include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c"
#define NODE_RAM(x) \ .node_id = 0+x, \
Modified: trunk/LinuxBIOSv2/src/mainboard/sunw/ultra40/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/sunw/ultra40/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/sunw/ultra40/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -52,7 +52,7 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses K8_HT_FREQ_1G_SUPPORT
uses USE_DCACHE_RAM @@ -66,7 +66,7 @@
uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE -uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
## ROM_SIZE is the size of boot ROM that this board will use. @@ -134,7 +134,7 @@ #default CONFIG_CHIP_NAME=1
#1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000
#Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 @@ -146,7 +146,7 @@ #default HT_CHAIN_END_UNITID_BASE=0x0
#make the SB HT chain on bus 0, default is not (0) -default K8_SB_HT_CHAIN_ON_BUS0=2 +default SB_HT_CHAIN_ON_BUS0=2
##only offset for SB chain?, default is yes(1) default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
Modified: trunk/LinuxBIOSv2/src/mainboard/tyan/s2850/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/tyan/s2850/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/tyan/s2850/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -52,7 +52,7 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -122,7 +122,7 @@ default CONFIG_CHIP_NAME=1
#1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console default CONFIG_CONSOLE_VGA=1 @@ -135,7 +135,7 @@ default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0
## ## Build code to setup a generic IOAPIC
Modified: trunk/LinuxBIOSv2/src/mainboard/tyan/s2875/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/tyan/s2875/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/tyan/s2875/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -52,7 +52,7 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -123,7 +123,7 @@ default CONFIG_CHIP_NAME=1
#1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console default CONFIG_CONSOLE_VGA=1 @@ -136,7 +136,7 @@ default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0
## ## Build code to setup a generic IOAPIC
Modified: trunk/LinuxBIOSv2/src/mainboard/tyan/s2880/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/tyan/s2880/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/tyan/s2880/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -52,7 +52,7 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -122,7 +122,7 @@ default CONFIG_CHIP_NAME=1
#1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console default CONFIG_CONSOLE_VGA=1 @@ -135,7 +135,7 @@ default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0
## ## Build code to setup a generic IOAPIC
Modified: trunk/LinuxBIOSv2/src/mainboard/tyan/s2881/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/tyan/s2881/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/tyan/s2881/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -52,7 +52,7 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -122,7 +122,7 @@ default CONFIG_CHIP_NAME=1
#1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console #default CONFIG_CONSOLE_VGA=1 @@ -135,7 +135,7 @@ default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0
## ## Build code to setup a generic IOAPIC
Modified: trunk/LinuxBIOSv2/src/mainboard/tyan/s2882/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/tyan/s2882/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/tyan/s2882/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -52,7 +52,7 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -122,7 +122,7 @@ default CONFIG_CHIP_NAME=1
#1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console default CONFIG_CONSOLE_VGA=1 @@ -135,7 +135,7 @@ default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0
## ## Build code to setup a generic IOAPIC
Modified: trunk/LinuxBIOSv2/src/mainboard/tyan/s2885/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/tyan/s2885/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/tyan/s2885/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -52,7 +52,7 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -126,7 +126,7 @@ default CONFIG_CHIP_NAME=1
#1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console default CONFIG_CONSOLE_VGA=1 @@ -139,7 +139,7 @@ default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0
default ENABLE_APIC_EXT_ID=1 default APIC_ID_OFFSET=0x10
Modified: trunk/LinuxBIOSv2/src/mainboard/tyan/s2891/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/tyan/s2891/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/tyan/s2891/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -53,7 +53,7 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses K8_HT_FREQ_1G_SUPPORT
uses USE_DCACHE_RAM @@ -69,7 +69,7 @@
uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE -uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
uses CONFIG_LB_MEM_TOPK @@ -137,7 +137,7 @@ default CONFIG_LOGICAL_CPUS=1
#1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000
#Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 @@ -149,7 +149,7 @@ #default HT_CHAIN_END_UNITID_BASE=0x0
#make the SB HT chain on bus 0, default is not (0) -default K8_SB_HT_CHAIN_ON_BUS0=2 +default SB_HT_CHAIN_ON_BUS0=2
##only offset for SB chain?, default is yes(1) default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
Modified: trunk/LinuxBIOSv2/src/mainboard/tyan/s2892/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/tyan/s2892/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/tyan/s2892/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -53,7 +53,7 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses K8_HT_FREQ_1G_SUPPORT
uses USE_DCACHE_RAM @@ -63,7 +63,7 @@
uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE -uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
## ROM_SIZE is the size of boot ROM that this board will use. @@ -129,7 +129,7 @@ default CONFIG_LOGICAL_CPUS=1
#1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000
#Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 @@ -141,7 +141,7 @@ #default HT_CHAIN_END_UNITID_BASE=0x0
#make the SB HT chain on bus 0, default is not (0) -default K8_SB_HT_CHAIN_ON_BUS0=2 +default SB_HT_CHAIN_ON_BUS0=2
##only offset for SB chain?, default is yes(1) default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
Modified: trunk/LinuxBIOSv2/src/mainboard/tyan/s2895/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/tyan/s2895/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/tyan/s2895/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -52,7 +52,7 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK uses K8_HT_FREQ_1G_SUPPORT
uses USE_DCACHE_RAM @@ -66,7 +66,7 @@
uses HT_CHAIN_UNITID_BASE uses HT_CHAIN_END_UNITID_BASE -uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
## ROM_SIZE is the size of boot ROM that this board will use. @@ -134,7 +134,7 @@ #default CONFIG_CHIP_NAME=1
#1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000
#Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 @@ -146,7 +146,7 @@ #default HT_CHAIN_END_UNITID_BASE=0x0
#make the SB HT chain on bus 0, default is not (0) -default K8_SB_HT_CHAIN_ON_BUS0=2 +default SB_HT_CHAIN_ON_BUS0=2
##only offset for SB chain?, default is yes(1) default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
Modified: trunk/LinuxBIOSv2/src/mainboard/tyan/s4880/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/tyan/s4880/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/tyan/s4880/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -52,7 +52,7 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -126,7 +126,7 @@ default CONFIG_CHIP_NAME=1
#1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console default CONFIG_CONSOLE_VGA=1 @@ -139,7 +139,7 @@ default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0
default ENABLE_APIC_EXT_ID=1 default APIC_ID_OFFSET=0x10
Modified: trunk/LinuxBIOSv2/src/mainboard/tyan/s4882/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/tyan/s4882/Options.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/mainboard/tyan/s4882/Options.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -52,7 +52,7 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -126,7 +126,7 @@ default CONFIG_CHIP_NAME=1
#1G memory hole -default K8_HW_MEM_HOLE_SIZEK=0x100000 +default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console #default CONFIG_CONSOLE_VGA=1 @@ -139,7 +139,7 @@ default USE_DCACHE_RAM=1 default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 -default CONFIG_USE_INIT=1 +default CONFIG_USE_INIT=0
default ENABLE_APIC_EXT_ID=1 default APIC_ID_OFFSET=0x10
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/Config.lb 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/Config.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -19,6 +19,14 @@
if HAVE_ACPI_TABLES object amdk8_acpi.o + makerule ssdt.c + depends "$(TOP)/src/northbridge/amd/amdk8/ssdt.dsl" + action "/usr/sbin/iasl -tc $(TOP)/src/northbridge/amd/amdk8/ssdt.dsl" + action "perl -pi -e 's/AmlCode/AmlCode_ssdt/g' ssdt.hex" + action "mv ssdt.hex ssdt.c" + end + object ./ssdt.o end
+ object get_sblk_pci1234.o
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8.h =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8.h 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -2,6 +2,10 @@
#define AMDK8_H
+#if K8_REV_F_SUPPORT == 1 + #include "amdk8_f.h" + +#else /* Definitions of various K8 registers */ /* Function 0 */ #define HT_TRANSACTION_CONTROL 0x68 @@ -55,6 +59,7 @@ #define DRAM_CSBASE 0x40 #define DRAM_CSMASK 0x60 #define DRAM_BANK_ADDR_MAP 0x80 + #define DRAM_TIMING_LOW 0x88 #define DTL_TCL_SHIFT 0 #define DTL_TCL_MASK 0x7 @@ -96,6 +101,7 @@ #define DTL_TWR_BASE 2 #define DTL_TWR_MIN 2 #define DTL_TWR_MAX 3 + #define DRAM_TIMING_HIGH 0x8c #define DTH_TWTR_SHIFT 0 #define DTH_TWTR_MASK 0x1 @@ -122,6 +128,7 @@ #define DTH_TWCL_BASE 1 #define DTH_TWCL_MIN 1 #define DTH_TWCL_MAX 2 + #define DRAM_CONFIG_LOW 0x90 #define DCL_DLL_Disable (1<<0) #define DCL_D_DRV (1<<1) @@ -140,7 +147,7 @@ #define DCL_DisInRcvrs (1<<24) #define DCL_BypMax_SHIFT 25 #define DCL_En2T (1<<28) -#define DCL_UpperCSMap (1<<29) + #define DRAM_CONFIG_HIGH 0x94 #define DCH_ASYNC_LAT_SHIFT 0 #define DCH_ASYNC_LAT_MASK 0xf @@ -232,3 +239,5 @@ #define ConnectionPending (1 << 4)
#endif + +#endif /* AMDK8_H */
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8_acpi.c =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8_acpi.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8_acpi.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -43,6 +43,7 @@ #include <device/pci.h> #include <cpu/x86/msr.h> #include <cpu/amd/mtrr.h> +#include <cpu/amd/amdk8_sysconf.h>
//it seems these function can be moved arch/i386/boot/acpi.c
@@ -112,6 +113,8 @@ return current; }
+ + static unsigned long resk(uint64_t value) { unsigned long resultk; @@ -153,7 +156,6 @@ state->current += acpi_create_srat_mem((acpi_srat_mem_t *)state->current, (res->index & 0xf), basek, sizek, 1); // need to figure out NV }
- unsigned long acpi_fill_srat(unsigned long current) { struct acpi_srat_mem_state srat_mem_state; @@ -175,5 +177,157 @@ #endif return current; } + + +unsigned long acpi_fill_slit(unsigned long current) +{ + /* need to find out the node num at first */ + /* fill the first 8 byte with that num */ + /* fill the next num*num byte with distance, local is 10, 1 hop mean 20, and 2 hop with 30.... */ + + /* because We has assume that we know the topology of the HT connection, So we can have set if we know the node_num */ + static uint8_t hops_8[] = { 0, 1, 1, 2, 2, 3, 3, 4, + 1, 0, 2, 1, 3, 2, 4, 3, + 1, 2, 0, 1, 1, 2, 2, 3, + 2, 1, 1, 0, 2, 1, 3, 2, + 2, 3, 1, 2, 0, 1, 1, 2, + 3, 2, 2, 1, 1, 0, 2, 1, + 3, 4, 2, 3, 1, 2, 0, 1, + 4, 4, 3, 2, 2, 1, 1, 0 }; + +// uint8_t outer_node[8]; + + uint8_t *p = (uint8_t *)current; + int nodes = sysconf.nodes; + int i,j; + memset(p, 0, 8+nodes*nodes); +// memset((uint8_t *)outer_node, 0, 8); + *p = (uint8_t) nodes; + p += 8; + +#if 0 + for(i=0;i<sysconf.hc_possible_num;i++) { + if((sysconf.pci1234[i]&1) !=1 ) continue; + outer_node[(sysconf.pci1234[i] >> 4) & 0xf] = 1; // mark the outer node + } +#endif + + for(i=0;i<nodes;i++) { + for(j=0;j<nodes; j++) { + if(i==j) { p[i*nodes+j] = 10; } + else { +#if 0 + int k; + uint8_t latency_factor = 0; + int k_start, k_end; + if(i<j) { + k_start = i; + k_end = j; + } else { + k_start = j; + k_end = i; + } + for(k=k_start;k<=k_end; k++) { + if(outer_node[k]) { + latency_factor = 1; + break; + } + } + p[i*nodes+j] = hops_8[i*nodes+j] * 2 + latency_factor + 10; +#else + p[i*nodes+j] = hops_8[i*nodes+j] * 2 + 10; +#endif + + + } + } + } + + current += 8+nodes*nodes; + + return current; +} + + //end
+ +// moved from mb acpi_tables.c +static void int_to_stream(uint32_t val, uint8_t *dest) +{ + int i; + for(i=0;i<4;i++) { + *(dest+i) = (val >> (8*i)) & 0xff; + } +} + + +// used by acpi_tables.h + +void update_ssdt(void *ssdt) +{ + uint8_t *BUSN; + uint8_t *MMIO; + uint8_t *PCIO; + uint8_t *SBLK; + uint8_t *TOM1; + uint8_t *SBDN; + uint8_t *HCLK; + uint8_t *HCDN; + uint8_t *CBST; + + int i; + device_t dev; + uint32_t dword; + msr_t msr; + + BUSN = ssdt+0x3a; //+5 will be next BUSN + MMIO = ssdt+0x57; //+5 will be next MMIO + PCIO = ssdt+0xaf; //+5 will be next PCIO + SBLK = ssdt+0xdc; // one byte + TOM1 = ssdt+0xe3; // + SBDN = ssdt+0xed;// + HCLK = ssdt+0xfa; //+5 will be next HCLK + HCDN = ssdt+0x12a; //+5 will be next HCDN + CBST = ssdt+0x157; // + + dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); + for(i=0;i<4;i++) { + dword = pci_read_config32(dev, 0xe0+i*4); + int_to_stream(dword, BUSN+i*5); + } + for(i=0;i<0x10;i++) { + dword = pci_read_config32(dev, 0x80+i*4); + int_to_stream(dword, MMIO+i*5); + } + for(i=0;i<0x08;i++) { + dword = pci_read_config32(dev, 0xc0+i*4); + int_to_stream(dword, PCIO+i*5); + } + + *SBLK = (uint8_t)(sysconf.sblk); + + msr = rdmsr(TOP_MEM); + int_to_stream(msr.lo, TOM1); + + for(i=0;i<sysconf.hc_possible_num;i++) { + int_to_stream(sysconf.pci1234[i], HCLK + i*5); + int_to_stream(sysconf.hcdn[i], HCDN + i*5); + } + for(i=sysconf.hc_possible_num; i<HC_POSSIBLE_NUM; i++) { // in case we set array size to other than 8 + int_to_stream(0x00000000, HCLK + i*5); + int_to_stream(0x20202020, HCDN + i*5); + } + + int_to_stream(sysconf.sbdn, SBDN); + + if((sysconf.pci1234[0] >> 12) & 0xff) { //sb chain on other than bus 0 + *CBST = (uint8_t) (0x0f); + } + else { + *CBST = (uint8_t) (0x00); + } + +} + +//end
Added: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8_f.h =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8_f.h (rev 0) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8_f.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,561 @@ +#ifndef AMDK8_F_H + +#define AMDK8_F_H +/* Definitions of various K8 registers */ +/* Function 0 */ +#define HT_TRANSACTION_CONTROL 0x68 +#define HTTC_DIS_RD_B_P (1 << 0) +#define HTTC_DIS_RD_DW_P (1 << 1) +#define HTTC_DIS_WR_B_P (1 << 2) +#define HTTC_DIS_WR_DW_P (1 << 3) +#define HTTC_DIS_MTS (1 << 4) +#define HTTC_CPU1_EN (1 << 5) +#define HTTC_CPU_REQ_PASS_PW (1 << 6) +#define HTTC_CPU_RD_RSP_PASS_PW (1 << 7) +#define HTTC_DIS_P_MEM_C (1 << 8) +#define HTTC_DIS_RMT_MEM_C (1 << 9) +#define HTTC_DIS_FILL_P (1 << 10) +#define HTTC_RSP_PASS_PW (1 << 11) +#define HTTC_CHG_ISOC_TO_ORD (1 << 12) +#define HTTC_BUF_REL_PRI_SHIFT 13 +#define HTTC_BUF_REL_PRI_MASK 3 +#define HTTC_BUF_REL_PRI_64 0 +#define HTTC_BUF_REL_PRI_16 1 +#define HTTC_BUF_REL_PRI_8 2 +#define HTTC_BUF_REL_PRI_2 3 +#define HTTC_LIMIT_CLDT_CFG (1 << 15) +#define HTTC_LINT_EN (1 << 16) +#define HTTC_APIC_EXT_BRD_CST (1 << 17) +#define HTTC_APIC_EXT_ID (1 << 18) +#define HTTC_APIC_EXT_SPUR (1 << 19) +#define HTTC_SEQ_ID_SRC_NODE_EN (1 << 20) +#define HTTC_DS_NP_REQ_LIMIT_SHIFT 21 +#define HTTC_DS_NP_REQ_LIMIT_MASK 3 +#define HTTC_DS_NP_REQ_LIMIT_NONE 0 +#define HTTC_DS_NP_REQ_LIMIT_1 1 +#define HTTC_DS_NP_REQ_LIMIT_4 2 +#define HTTC_DS_NP_REQ_LIMIT_8 3 +#define HTTC_MED_PRI_BYP_CNT_SHIFT 24 +#define HTTC_MED_PRI_BYP_CNT_MASK 3 +#define HTTC_HI_PRI_BYP_CNT_SHIFT 26 +#define HTTC_HI_PRI_BYP_CNT_MASK 3 + + +/* Function 1 */ +#define PCI_IO_BASE0 0xc0 +#define PCI_IO_BASE1 0xc8 +#define PCI_IO_BASE2 0xd0 +#define PCI_IO_BASE3 0xd8 +#define PCI_IO_BASE_VGA_EN (1 << 4) +#define PCI_IO_BASE_NO_ISA (1 << 5) + + +/* Function 2 */ +#define DRAM_CSBASE 0x40 +#define DRAM_CSMASK 0x60 +#define DRAM_BANK_ADDR_MAP 0x80 + +#define DRAM_CTRL 0x78 +#define DC_RdPtrInit_SHIFT 0 +#define DC_RdPrtInit_MASK 0xf +#define DC_RdPadRcvFifoDly_SHIFT 4 +#define DC_RdPadRcvFifoDly_MASK 7 +#define DC_RdPadRcvFiloDly_1_5_CLK 2 +#define DC_RdPadRcvFiloDly_2_CLK 3 +#define DC_RdPadRcvFiloDly_2_5_CLK 4 +#define DC_RdPadRcvFiloDly_3_CLK 5 +#define DC_RdPadRcvFiloDly_3_5_CLK 6 +#define DC_AltVidC3MemClkTriEn (1<<16) +#define DC_DllTempAdjTime_SHIFT 17 +#define DC_DllTempAdjTime_MASK 1 +#define DC_DllTempAdjTime_5_MS 0 +#define DC_DllTempAdjTime_1_MS 1 +#define DC_DqsRcvEnTrain (1<<18) + +#define DRAM_INIT 0x7c +#define DI_MrsAddress_SHIFT 0 +#define DI_MrsAddress_MASK 0xffff +#define DI_MrsBank_SHIFT 16 +#define DI_MrsBank_MASK 7 +#define DI_SendRchgAll (1<<24) +#define DI_SendAutoRefresh (1<<25) +#define DI_SendMrsCmd (1<<26) +#define DI_DeassertMemRstX (1<<27) +#define DI_AssertCke (1<<28) +#define DI_EnDramInit (1<<31) + +#define DRAM_TIMING_LOW 0x88 +#define DTL_TCL_SHIFT 0 +#define DTL_TCL_MASK 7 +#define DTL_TCL_BASE 1 +#define DTL_TCL_MIN 3 +#define DTL_TCL_MAX 6 +#define DTL_TRCD_SHIFT 4 +#define DTL_TRCD_MASK 3 +#define DTL_TRCD_BASE 3 +#define DTL_TRCD_MIN 3 +#define DTL_TRCD_MAX 6 +#define DTL_TRP_SHIFT 8 +#define DTL_TRP_MASK 3 +#define DTL_TRP_BASE 3 +#define DTL_TRP_MIN 3 +#define DTL_TRP_MAX 6 +#define DTL_TRTP_SHIFT 11 +#define DTL_TRTP_MASK 1 +#define DTL_TRTP_BASE 2 +#define DTL_TRTP_MIN 2 /* 4 for 64 bytes*/ +#define DTL_TRTP_MAX 3 /* 5 for 64 bytes */ +#define DTL_TRAS_SHIFT 12 +#define DTL_TRAS_MASK 0xf +#define DTL_TRAS_BASE 3 +#define DTL_TRAS_MIN 5 +#define DTL_TRAS_MAX 18 +#define DTL_TRC_SHIFT 16 +#define DTL_TRC_MASK 0xf +#define DTL_TRC_BASE 11 +#define DTL_TRC_MIN 11 +#define DTL_TRC_MAX 26 +#define DTL_TWR_SHIFT 20 +#define DTL_TWR_MASK 3 +#define DTL_TWR_BASE 3 +#define DTL_TWR_MIN 3 +#define DTL_TWR_MAX 6 +#define DTL_TRRD_SHIFT 22 +#define DTL_TRRD_MASK 3 +#define DTL_TRRD_BASE 2 +#define DTL_TRRD_MIN 2 +#define DTL_TRRD_MAX 5 +#define DTL_MemClkDis_SHIFT 24 /* Channel A */ +#define DTL_MemClkDis3 (1 << 26) +#define DTL_MemClkDis2 (1 << 27) +#define DTL_MemClkDis1 (1 << 28) +#define DTL_MemClkDis0 (1 << 29) +#define DTL_MemClkDis1_AM2 (0x51 << 24) +#define DTL_MemClkDis0_AM2 (0xa2 << 24) +#define DTL_MemClkDis0_S1g1 (0xa2 << 24) + +/* DTL_MemClkDis for m2 and s1g1 is different */ + +#define DRAM_TIMING_HIGH 0x8c +#define DTH_TRWTTO_SHIFT 4 +#define DTH_TRWTTO_MASK 7 +#define DTH_TRWTTO_BASE 2 +#define DTH_TRWTTO_MIN 2 +#define DTH_TRWTTO_MAX 9 +#define DTH_TWTR_SHIFT 8 +#define DTH_TWTR_MASK 3 +#define DTH_TWTR_BASE 0 +#define DTH_TWTR_MIN 1 +#define DTH_TWTR_MAX 3 +#define DTH_TWRRD_SHIFT 10 +#define DTH_TWRRD_MASK 3 +#define DTH_TWRRD_BASE 0 +#define DTH_TWRRD_MIN 0 +#define DTH_TWRRD_MAX 3 +#define DTH_TWRWR_SHIFT 12 +#define DTH_TWRWR_MASK 3 +#define DTH_TWRWR_BASE 1 +#define DTH_TWRWR_MIN 1 +#define DTH_TWRWR_MAX 3 +#define DTH_TRDRD_SHIFT 14 +#define DTH_TRDRD_MASK 3 +#define DTH_TRDRD_BASE 2 +#define DTH_TRDRD_MIN 2 +#define DTH_TRDRD_MAX 5 +#define DTH_TREF_SHIFT 16 +#define DTH_TREF_MASK 3 +#define DTH_TREF_7_8_US 2 +#define DTH_TREF_3_9_US 3 +#define DTH_TRFC0_SHIFT 20 /* for Logical DIMM0 */ +#define DTH_TRFC_MASK 7 +#define DTH_TRFC_75_256M 0 +#define DTH_TRFC_105_512M 1 +#define DTH_TRFC_127_5_1G 2 +#define DTH_TRFC_195_2G 3 +#define DTH_TRFC_327_5_4G 4 +#define DTH_TRFC1_SHIFT 23 /*for Logical DIMM1 */ +#define DTH_TRFC2_SHIFT 26 /*for Logical DIMM2 */ +#define DTH_TRFC3_SHIFT 29 /*for Logical DIMM3 */ + +#define DRAM_CONFIG_LOW 0x90 +#define DCL_InitDram (1<<0) +#define DCL_ExitSelfRef (1<<1) +#define DCL_DramTerm_SHIFT 4 +#define DCL_DramTerm_MASK 3 +#define DCL_DramTerm_No 0 +#define DCL_DramTerm_75_OH 1 +#define DCL_DramTerm_150_OH 2 +#define DCL_DramTerm_50_OH 3 +#define DCL_DrvWeak (1<<7) +#define DCL_ParEn (1<<8) +#define DCL_SelfRefRateEn (1<<9) +#define DCL_BurstLength32 (1<<10) +#define DCL_Width128 (1<<11) +#define DCL_X4Dimm_SHIFT 12 +#define DCL_X4Dimm_MASK 0xf +#define DCL_UnBuffDimm (1<<16) +#define DCL_DimmEccEn (1<<19) + +#define DRAM_CONFIG_HIGH 0x94 +#define DCH_MemClkFreq_SHIFT 0 +#define DCH_MemClkFreq_MASK 7 +#define DCH_MemClkFreq_200MHz 0 +#define DCH_MemClkFreq_266MHz 1 +#define DCH_MemClkFreq_333MHz 2 +#define DCH_MemClkFreq_400MHz 3 +#define DCH_MemClkFreqVal (1<<3) +#define DCH_MaxAsyncLat_SHIFT 4 +#define DCH_MaxAsyncLat_MASK 0xf +#define DCH_MaxAsyncLat_BASE 0 +#define DCH_MaxAsyncLat_MIN 0 +#define DCH_MaxAsyncLat_MAX 15 +#define DCH_RDqsEn (1<<12) +#define DCH_DisDramInterface (1<<14) +#define DCH_PowerDownEn (1<<15) +#define DCH_PowerDownMode_SHIFT 16 +#define DCH_PowerDownMode_MASK 1 +#define DCH_PowerDownMode_Channel_CKE 0 +#define DCH_PowerDownMode_ChipSelect_CKE 1 +#define DCH_FourRankSODimm (1<<17) +#define DCH_FourRankRDimm (1<<18) +#define DCH_SlowAccessMode (1<<19) +#define DCH_BankSwizzleMode (1<<22) +#define DCH_DcqBypassMax_SHIFT 24 +#define DCH_DcqBypassMax_MASK 0xf +#define DCH_DcqBypassMax_BASE 0 +#define DCH_DcqBypassMax_MIN 0 +#define DCH_DcqBypassMax_MAX 15 +#define DCH_FourActWindow_SHIFT 28 +#define DCH_FourActWindow_MASK 0xf +#define DCH_FourActWindow_BASE 7 +#define DCH_FourActWindow_MIN 8 +#define DCH_FourActWindow_MAX 20 + + +// for 0x98 index and 0x9c data +#define DRAM_CTRL_ADDI_DATA_OFFSET 0x98 +#define DCAO_DctOffset_SHIFT 0 +#define DCAO_DctOffset_MASK 0x3fffffff +#define DCAO_DctAccessWrite (1<<30) +#define DCAO_DctAccessDone (1<<31) + +#define DRAM_CTRL_ADDI_DATA_PORT 0x9c + +#define DRAM_OUTPUT_DRV_COMP_CTRL 0x00 +#define DODCC_CkeDrvStren_SHIFT 0 +#define DODCC_CkeDrvStren_MASK 3 +#define DODCC_CkeDrvStren_1_0X 0 +#define DODCC_CkeDrvStren_1_25X 1 +#define DODCC_CkeDrvStren_1_5X 2 +#define DODCC_CkeDrvStren_2_0X 3 +#define DODCC_CsOdtDrvStren_SHIFT 4 +#define DODCC_CsOdtDrvStren_MASK 3 +#define DODCC_CsOdtDrvStren_1_0X 0 +#define DODCC_CsOdtDrvStren_1_25X 1 +#define DODCC_CsOdtDrvStren_1_5X 2 +#define DODCC_CsOdtDrvStren_2_0X 3 +#define DODCC_AddrCmdDrvStren_SHIFT 8 +#define DODCC_AddrCmdDrvStren_MASK 3 +#define DODCC_AddrCmdDrvStren_1_0X 0 +#define DODCC_AddrCmdDrvStren_1_25X 1 +#define DODCC_AddrCmdDrvStren_1_5X 2 +#define DODCC_AddrCmdDrvStren_2_0X 3 +#define DODCC_ClkDrvStren_SHIFT 12 +#define DODCC_ClkDrvStren_MASK 3 +#define DODCC_ClkDrvStren_0_75X 0 +#define DODCC_ClkDrvStren_1_0X 1 +#define DODCC_ClkDrvStren_1_25X 2 +#define DODCC_ClkDrvStren_1_5X 3 +#define DODCC_DataDrvStren_SHIFT 16 +#define DODCC_DataDrvStren_MASK 3 +#define DODCC_DataDrvStren_0_75X 0 +#define DODCC_DataDrvStren_1_0X 1 +#define DODCC_DataDrvStren_1_25X 2 +#define DODCC_DataDrvStren_1_5X 3 +#define DODCC_DqsDrvStren_SHIFT 20 +#define DODCC_DqsDrvStren_MASK 3 +#define DODCC_DqsDrvStren_0_75X 0 +#define DODCC_DqsDrvStren_1_0X 1 +#define DODCC_DqsDrvStren_1_25X 2 +#define DODCC_DqsDrvStren_1_5X 3 +#define DODCC_ProcOdt_SHIFT 28 +#define DODCC_ProcOdt_MASK 3 +#define DODCC_ProcOdt_300_OHMS 0 +#define DODCC_ProcOdt_150_OHMS 1 +#define DODCC_ProcOdt_75_OHMS 2 + +#define DRAM_WRITE_DATA_TIMING_CTRL_LOW 0x01 +#define DWDTCL_WrDatTimeByte0_SHIFT 0 +#define DWDTC_WrDatTimeByte_MASK 0x3f +#define DWDTC_WrDatTimeByte_BASE 0 +#define DWDTC_WrDatTimeByte_MIN 0 +#define DWDTC_WrDatTimeByte_MAX 47 +#define DWDTCL_WrDatTimeByte1_SHIFT 8 +#define DWDTCL_WrDatTimeByte2_SHIFT 16 +#define DWDTCL_WrDatTimeByte3_SHIFT 24 + +#define DRAM_WRITE_DATA_TIMING_CTRL_HIGH 0x02 +#define DWDTCH_WrDatTimeByte4_SHIFT 0 +#define DWDTCH_WrDatTimeByte5_SHIFT 8 +#define DWDTCH_WrDatTimeByte6_SHIFT 16 +#define DWDTCH_WrDatTimeByte7_SHIFT 24 + +#define DRAM_WRITE_DATA_ECC_TIMING_CTRL 0x03 +#define DWDETC_WrChkTime_SHIFT 0 +#define DWDETC_WrChkTime_MASK 0x3f +#define DWDETC_WrChkTime_BASE 0 +#define DWDETC_WrChkTime_MIN 0 +#define DWDETC_WrChkTime_MAX 47 + +#define DRAM_ADDR_TIMING_CTRL 0x04 +#define DATC_CkeFineDelay_SHIFT 0 +#define DATC_CkeFineDelay_MASK 0x1f +#define DATC_CkeFineDelay_BASE 0 +#define DATC_CkeFineDelay_MIN 0 +#define DATC_CkeFineDelay_MAX 31 +#define DATC_CkeSetup (1<<5) +#define DATC_CsOdtFineDelay_SHIFT 8 +#define DATC_CsOdtFineDelay_MASK 0x1f +#define DATC_CsOdtFineDelay_BASE 0 +#define DATC_CsOdtFineDelay_MIN 0 +#define DATC_CsOdtFineDelay_MAX 31 +#define DATC_CsOdtSetup (1<<13) +#define DATC_AddrCmdFineDelay_SHIFT 16 +#define DATC_AddrCmdFineDelay_MASK 0x1f +#define DATC_AddrCmdFineDelay_BASE 0 +#define DATC_AddrCmdFineDelay_MIN 0 +#define DATC_AddrCmdFineDelay_MAX 31 +#define DATC_AddrCmdSetup (1<<21) + +#define DRAM_READ_DQS_TIMING_CTRL_LOW 0x05 +#define DRDTCL_RdDqsTimeByte0_SHIFT 0 +#define DRDTC_RdDqsTimeByte_MASK 0x3f +#define DRDTC_RdDqsTimeByte_BASE 0 +#define DRDTC_RdDqsTimeByte_MIN 0 +#define DRDTC_RdDqsTimeByte_MAX 47 +#define DRDTCL_RdDqsTimeByte1_SHIFT 8 +#define DRDTCL_RdDqsTimeByte2_SHIFT 16 +#define DRDTCL_RdDqsTimeByte3_SHIFT 24 + +#define DRAM_READ_DQS_TIMING_CTRL_HIGH 0x06 +#define DRDTCH_RdDqsTimeByte4_SHIFT 0 +#define DRDTCH_RdDqsTimeByte5_SHIFT 8 +#define DRDTCH_RdDqsTimeByte6_SHIFT 16 +#define DRDTCH_RdDqsTimeByte7_SHIFT 24 + +#define DRAM_READ_DQS_ECC_TIMING_CTRL 0x07 +#define DRDETC_RdDqsTimeCheck_SHIFT 0 +#define DRDETC_RdDqsTimeCheck_MASK 0x3f +#define DRDETC_RdDqsTimeCheck_BASE 0 +#define DRDETC_RdDqsTimeCheck_MIN 0 +#define DRDETC_RdDqsTimeCheck_MAX 47 + +#define DRAM_DQS_RECV_ENABLE_TIME0 0x10 +#define DDRET_DqsRcvEnDelay_SHIFT 0 +#define DDRET_DqsRcvEnDelay_MASK 0xff +#define DDRET_DqsRcvEnDelay_BASE 0 +#define DDRET_DqsRcvEnDelay_MIN 0 +#define DDRET_DqsRcvEnDelay_MAX 0xae /* unit is 50ps */ + +#define DRAM_DQS_RECV_ENABLE_TIME1 0x13 +#define DRAM_DQS_RECV_ENABLE_TIME2 0x16 +#define DRAM_DQS_RECV_ENABLE_TIME3 0x19 + +/* there are index 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x30, 0x33, 0x36, 0x39 +that are corresponding to 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x10, 0x13, 0x16, 0x19 +*/ +#define DRAM_CTRL_MISC 0xa0 +#define DCM_MemClrStatus (1<<0) +#define DCM_DisableJitter (1<<1) +#define DCM_RdWrQByp_SHIFT 2 +#define DCM_RdWrQByp_MASK 3 +#define DCM_RdWrQByp_2 0 +#define DCM_RdWrQByp_4 1 +#define DCM_RdWrQByp_8 2 +#define DCM_RdWrQByp_16 3 +#define DCM_Mode64BitMux (1<<4) +#define DCM_DCC_EN (1<<5) +#define DCM_ILD_lmt_SHIFT 6 +#define DCM_ILD_lmt_MASK 7 +#define DCM_ILD_lmt_0 0 +#define DCM_ILD_lmt_4 1 +#define DCM_ILD_lmt_8 2 +#define DCM_ILD_lmt_16 3 +#define DCM_ILD_lmt_32 4 +#define DCM_ILD_lmt_64 5 +#define DCM_ILD_lmt_128 6 +#define DCM_ILD_lmt_256 7 +#define DCM_DramEnabled (1<<9) +#define DCM_MemClkDis_SHIFT 24 /* Channel B */ +#define DCM_MemClkDis3 (1 << 26) +#define DCM_MemClkDis2 (1 << 27) +#define DCM_MemClkDis1 (1 << 28) +#define DCM_MemClkDis0 (1 << 29) + + +/* Function 3 */ +#define MCA_NB_CONFIG 0x44 +#define MNC_ECC_EN (1 << 22) +#define MNC_CHIPKILL_EN (1 << 23) + +#define SCRUB_CONTROL 0x58 +#define SCRUB_NONE 0 +#define SCRUB_40ns 1 +#define SCRUB_80ns 2 +#define SCRUB_160ns 3 +#define SCRUB_320ns 4 +#define SCRUB_640ns 5 +#define SCRUB_1_28us 6 +#define SCRUB_2_56us 7 +#define SCRUB_5_12us 8 +#define SCRUB_10_2us 9 +#define SCRUB_20_5us 10 +#define SCRUB_41_0us 11 +#define SCRUB_81_9us 12 +#define SCRUB_163_8us 13 +#define SCRUB_327_7us 14 +#define SCRUB_655_4us 15 +#define SCRUB_1_31ms 16 +#define SCRUB_2_62ms 17 +#define SCRUB_5_24ms 18 +#define SCRUB_10_49ms 19 +#define SCRUB_20_97ms 20 +#define SCRUB_42ms 21 +#define SCRUB_84ms 22 +#define SC_DRAM_SCRUB_RATE_SHFIT 0 +#define SC_DRAM_SCRUB_RATE_MASK 0x1f +#define SC_L2_SCRUB_RATE_SHIFT 8 +#define SC_L2_SCRUB_RATE_MASK 0x1f +#define SC_L1D_SCRUB_RATE_SHIFT 16 +#define SC_L1D_SCRUB_RATE_MASK 0x1f + +#define SCRUB_ADDR_LOW 0x5C + +#define SCRUB_ADDR_HIGH 0x60 + +#define NORTHBRIDGE_CAP 0xE8 +#define NBCAP_128Bit (1 << 0) +#define NBCAP_MP (1 << 1) +#define NBCAP_BIG_MP (1 << 2) +#define NBCAP_ECC (1 << 3) +#define NBCAP_CHIPKILL_ECC (1 << 4) +#define NBCAP_MEMCLK_SHIFT 5 +#define NBCAP_MEMCLK_MASK 3 +#define NBCAP_MEMCLK_200MHZ 3 +#define NBCAP_MEMCLK_266MHZ 2 +#define NBCAP_MEMCLK_333MHZ 1 +#define NBCAP_MEMCLK_NOLIMIT 0 +#define NBCAP_MEMCTRL (1 << 8) +#define NBCAP_HtcCap (1<<10) +#define NBCAP_CmpCap_SHIFT 12 +#define NBCAP_CmpCap_MASK 3 + + +#define LinkConnected (1 << 0) +#define InitComplete (1 << 1) +#define NonCoherent (1 << 2) +#define ConnectionPending (1 << 4) + + +#include "raminit.h" +//struct definitions + +struct dimm_size { + uint8_t per_rank; // it is rows + col + bank_lines + data lines */ + uint8_t rows; + uint8_t col; + uint8_t bank; //1, 2, 3 mean 2, 4, 8 + uint8_t rank; +} __attribute__((packed)); + +struct mem_info { // pernode + uint32_t dimm_mask; + struct dimm_size sz[DIMM_SOCKETS]; + uint32_t x4_mask; + uint32_t x16_mask; + uint32_t single_rank_mask; + uint32_t page_1k_mask; +// uint32_t ecc_mask; +// uint32_t registered_mask; + uint8_t is_opteron; + uint8_t is_registered; + uint8_t is_ecc; + uint8_t is_Width128; + uint8_t memclk_set; // we need to use this to retrieve the mem param + uint8_t rsv[3]; +} __attribute__((packed)); + +struct link_pair_st { + device_t udev; + uint32_t upos; + uint32_t uoffs; + device_t dev; + uint32_t pos; + uint32_t offs; + +} __attribute__((packed)); + +struct sys_info { + uint8_t ctrl_present[NODE_NUMS]; + struct mem_info meminfo[NODE_NUMS]; + struct mem_controller ctrl[NODE_NUMS]; + uint8_t mem_trained[NODE_NUMS]; + uint32_t tom_k; + uint32_t tom2_k; + + uint32_t mem_base[NODE_NUMS]; + uint32_t cs_base[NODE_NUMS*8]; //8 cs_idx + uint32_t hole_reg[NODE_NUMS]; // can we spare it to one, and put ctrl idx in it + + uint8_t dqs_delay_a[NODE_NUMS*2*2*9]; //8 node channel 2, direction 2 , bytelane *9 + uint8_t dqs_rcvr_dly_a[NODE_NUMS*2*8]; //8 node, channel 2, receiver 8 + uint32_t nodes; + struct link_pair_st link_pair[16];// enough? only in_conherent + uint32_t link_pair_num; + uint32_t ht_c_num; + uint32_t sbdn; + uint32_t sblk; + uint32_t sbbusn; +} __attribute__((packed)); + +#if MEM_TRAIN_SEQ == 1 + +static void wait_all_core0_mem_trained(struct sys_info *sysinfo) +{ + int i; + uint32_t mask = 0; + + if(sysinfo->nodes == 1) return; // in case only one cpu installed + + for(i=1; i<sysinfo->nodes; i++) { + if (!sysinfo->ctrl_present[ i ]) + continue; + + /* Skip everything if I don't have any memory on this controller */ + if(sysinfo->meminfo[i].dimm_mask==0x00) continue; + + mask |= (1<<i); + + } + + i = 1; + while(1) { + if(mask & (1<<i)) { + if((sysinfo->mem_trained[i])) { + mask &= ~(1<<i); + } + } + + if(!mask) break; + + /* cpu_relax */ + __asm__ __volatile__("rep;nop": : :"memory"); + + i++; + i%=sysinfo->nodes; + } + +} +#endif + +#endif /* AMDK8_F_H */
Added: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8_f_pci.c =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8_f_pci.c (rev 0) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/amdk8_f_pci.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,57 @@ +#ifndef AMDK8_F_PCI_C + +#define AMDK8_F_PCI_C +/* bit [10,8] are dev func, bit[1,0] are dev index */ +static uint32_t pci_read_config32_index(device_t dev, uint32_t index_reg, uint32_t index) +{ + uint32_t dword; + + pci_write_config32(dev, index_reg, index); + + dword = pci_read_config32(dev, index_reg+0x4); + + return dword; +} + +static void pci_write_config32_index(device_t dev, uint32_t index_reg, uint32_t index, uint32_t data) +{ + + pci_write_config32(dev, index_reg, index); + + pci_write_config32(dev, index_reg + 0x4, data); + +} + +static uint32_t pci_read_config32_index_wait(device_t dev, uint32_t index_reg, uint32_t index) +{ + + uint32_t dword; + + index &= ~(1<<30); + pci_write_config32(dev, index_reg, index); + + do { + dword = pci_read_config32(dev, index_reg); + } while (!(dword & (1<<31))); + + dword = pci_read_config32(dev, index_reg+0x4); + + return dword; +} + +static void pci_write_config32_index_wait(device_t dev, uint32_t index_reg, uint32_t index, uint32_t data) +{ + + uint32_t dword; + + pci_write_config32(dev, index_reg + 0x4, data); + + index |= (1<<30); + pci_write_config32(dev, index_reg, index); + do { + dword = pci_read_config32(dev, index_reg); + } while (!(dword & (1<<31))); + +} + +#endif
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/coherent_ht.c =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/coherent_ht.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/coherent_ht.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -1642,6 +1642,10 @@ #endif } +static inline unsigned get_nodes(void) +{ + return ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1; +}
static void coherent_ht_finalize(unsigned nodes) {
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/coherent_ht_car.c =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/coherent_ht_car.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/coherent_ht_car.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -285,12 +285,14 @@ freq_cap = pci_read_config16(dev, pos); freq_cap &= ~(1 << HT_FREQ_VENDOR); /* Ignore Vendor HT frequencies */
+#if K8_REV_F_SUPPORT == 0 #if K8_HT_FREQ_1G_SUPPORT == 1 if (!is_cpu_pre_e0()) { return freq_cap; } #endif +#endif
id = pci_read_config32(dev, 0);
@@ -1590,7 +1592,9 @@ static void coherent_ht_finalize(unsigned nodes) { unsigned node; +#if K8_REV_F_SUPPORT == 0 int rev_a0; +#endif #if CONFIG_LOGICAL_CPUS==1 unsigned total_cpus;
@@ -1609,7 +1613,11 @@ */
print_spew("coherent_ht_finalize\r\n"); + +#if K8_REV_F_SUPPORT == 0 rev_a0 = is_cpu_rev_a0(); +#endif + for (node = 0; node < nodes; node++) { device_t dev; uint32_t val; @@ -1638,11 +1646,13 @@ (3 << HTTC_HI_PRI_BYP_CNT_SHIFT); pci_write_config32(dev, HT_TRANSACTION_CONTROL, val);
+#if K8_REV_F_SUPPORT == 0 if (rev_a0) { pci_write_config32(dev, 0x94, 0); pci_write_config32(dev, 0xb4, 0); pci_write_config32(dev, 0xd4, 0); } +#endif }
print_spew("done\r\n"); @@ -1656,6 +1666,7 @@ device_t dev; uint32_t cmd; dev = NODE_MC(node); +#if K8_REV_F_SUPPORT == 0 if (is_cpu_pre_c0()) {
/* Errata 66 @@ -1697,6 +1708,7 @@ needs_reset = 1; /* Needed? */ } } +#endif } return needs_reset; } @@ -1734,6 +1746,11 @@ return needs_reset; }
+static inline unsigned get_nodes(void) +{ + return ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1; +} + static int optimize_link_coherent_ht(void) { int needs_reset = 0;
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/get_sblk_pci1234.c =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/get_sblk_pci1234.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/get_sblk_pci1234.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -39,7 +39,9 @@ #include <string.h> #include <stdint.h>
+#include <cpu/amd/amdk8_sysconf.h>
+ #if 0 unsigned node_link_to_bus(unsigned node, unsigned link) { @@ -77,13 +79,6 @@ #endif
-extern unsigned pci1234[]; -extern unsigned hcdn[]; -extern unsigned hc_possible_num; -extern unsigned sblk; - -unsigned hcdn_reg[4]; // defined in northbridge.c - /* why we need pci1234 array final result for pci1234 will be pci1234[0] will record sblink and bus range @@ -152,6 +147,13 @@
So Max HC_POSSIBLE_NUM is 8
+ 1n: 3 + 2n: 2x2 - 1 + 4n: 1x4 - 2 + 6n: 2 + 8n: 2 + Total: 12 + just put all the possible ht node/link to the list tp pci1234[] in get_bus_conf.c on MB dir
Also don't forget to increase the ACPI_SSDTX_NUM etc if you have too much SSDT @@ -169,11 +171,11 @@ /* read PCI_DEV(0,0x18,0) 0x64 bit [8:9] to find out SbLink m */ dev = dev_find_slot(0, PCI_DEVFN(0x18,0)); dword = pci_read_config32(dev, 0x64); - sblk = (dword>>8) & 0x3; + sysconf.sblk = (dword>>8) & 0x3;
dword &=0x0300; dword |= 1; - pci1234[0] = dword; + sysconf.pci1234[0] = dword;
/*about hardcode numbering for HT_IO support set the node_id and link_id that could have ht chain in the one array, @@ -189,35 +191,35 @@ dwordx = pci_read_config32(dev, 0xe0+j*4); dwordx &=0xffff0ff1; //keep bus num, node_id, link_num, enable bits if((dwordx & 0xff1) == dword) { //SBLINK - pci1234[0] = dwordx; - hcdn[0] = hcdn_reg[j]; + sysconf.pci1234[0] = dwordx; + sysconf.hcdn[0] = sysconf.hcdn_reg[j]; continue; } if((dwordx & 1) == 1) { // We need to find out the number of HC // for exact match - for(i=1;i<hc_possible_num;i++) { - if((dwordx & 0xff0) == (pci1234[i] & 0xff0)) { - pci1234[i] = dwordx; - hcdn[i] = hcdn_reg[j]; + for(i=1;i<sysconf.hc_possible_num;i++) { + if((dwordx & 0xff0) == (sysconf.pci1234[i] & 0xff0)) { + sysconf.pci1234[i] = dwordx; + sysconf.hcdn[i] = sysconf.hcdn_reg[j]; break; } } // for 0xff0 match or same node - for(i=1;i<hc_possible_num;i++) { - if((dwordx & 0xff0) == (dwordx & pci1234[i] & 0xff0)) { - pci1234[i] = dwordx; - hcdn[i] = hcdn_reg[j]; + for(i=1;i<sysconf.hc_possible_num;i++) { + if((dwordx & 0xff0) == (dwordx & sysconf.pci1234[i] & 0xff0)) { + sysconf.pci1234[i] = dwordx; + sysconf.hcdn[i] = sysconf.hcdn_reg[j]; break; } } } }
- for(i=1;i<hc_possible_num;i++) { - if((pci1234[i] & 1) != 1) { - pci1234[i] = 0; - hcdn[i] = 0x20202020; + for(i=1;i<sysconf.hc_possible_num;i++) { + if((sysconf.pci1234[i] & 1) != 1) { + sysconf.pci1234[i] = 0; + sysconf.hcdn[i] = 0x20202020; } }
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/incoherent_ht.c =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/incoherent_ht.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/incoherent_ht.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -1,11 +1,8 @@ /* - * incoherent hypertransport enumeration - * originally written by Eric Biederman - * - * 2004.12 yhlu add multi ht chain dynamically support - * 2005.11 yhlu add let real sb to use small unitid - * 2006.03 stepan cleanups - */ + This should be done by Eric + 2004.12 yhlu add multi ht chain dynamically support + 2005.11 yhlu add let real sb to use small unitid +*/ #include <device/pci_def.h> #include <device/pci_ids.h> #include <device/hypertransport_def.h> @@ -22,10 +19,7 @@ #define K8_ALLOCATE_IO_RANGE 0 #endif
-/* Do we need to allocate MMIO? Currently we direct the last 64M - * to the southbridge link only. We have to remain access to the - * 4G-4M range for the southbridge (Flash ROM) - */ +// Do we need allocate MMIO? Current We direct last 64M to sblink only, We can not lose access to last 4M range to ROM #ifndef K8_ALLOCATE_MMIO_RANGE #define K8_ALLOCATE_MMIO_RANGE 0 #endif @@ -55,9 +49,7 @@ if (pos > PCI_CAP_LIST_NEXT) { pos = pci_read_config8(dev, pos); } - - /* loop through the linked list */ - while(pos != 0) { + while(pos != 0) { /* loop through the linked list */ uint8_t cap; cap = pci_read_config8(dev, pos + PCI_CAP_LIST_ID); if (cap == PCI_CAP_ID_HT) { @@ -89,7 +81,7 @@ device_t dev; uint32_t id;
- // actually, only for one HT device HT chain, and unitid is 0 + //actually, only for one HT device HT chain, and unitid is 0 #if HT_CHAIN_UNITID_BASE == 0 if(offset_unitid) { return; @@ -158,9 +150,11 @@ /* AMD K8 Unsupported 1Ghz? */ if (id == (PCI_VENDOR_ID_AMD | (0x1100 << 16))) { #if K8_HT_FREQ_1G_SUPPORT == 1 + #if K8_REV_F_SUPPORT == 0 if (is_cpu_pre_e0()) { // only E0 later support 1GHz freq_cap &= ~(1 << HT_FREQ_1000Mhz); } + #endif #else freq_cap &= ~(1 << HT_FREQ_1000Mhz); #endif @@ -268,33 +262,22 @@
return needs_reset; } - #if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
#if RAMINIT_SYSINFO == 1 -static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, - unsigned offset_unitid, struct sys_info *sysinfo); - -static int scan_pci_bus(unsigned bus, struct sys_info *sysinfo) +static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid, struct sys_info *sysinfo); +static int scan_pci_bus( unsigned bus , struct sys_info *sysinfo) #else -static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, - unsigned offset_unitid); - -static int scan_pci_bus(unsigned bus) +static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid); +static int scan_pci_bus( unsigned bus) #endif { - /* Here we already can access PCI_DEV(bus, 0, 0) to - * PCI_DEV(bus, 0x1f, 0x7). - * - * So scan these devices to find out whether there are more bridges. - * - * - If we find a pci bridge, set the bus number in the bridge, and - * continue with the next device. - * - * - For hypertransport bridges, set the bus number in the bridge and - * call ht_setup_chainx(), and scan_pci_bus() - * - */ + /* + here we already can access PCI_DEV(bus, 0, 0) to PCI_DEV(bus, 0x1f, 0x7) + So We can scan these devices to find out if they are bridge + If it is pci bridge, We need to set busn in bridge, and go on + For ht bridge, We need to set the busn in bridge and ht_setup_chainx, and the scan_pci_bus + */ unsigned int devfn; unsigned new_bus; unsigned max_bus; @@ -356,18 +339,12 @@ ((unsigned int) max_bus << 16)); pci_write_config32(dev, PCI_PRIMARY_BUS, buses); - /* Here we need to figure out if dev is a ht - * bridge. If it is, we need to call - * ht_setup_chainx() first - * - * Not verified --- yhlu - */ - - uint8_t upos; // is this valid C? - - // one func one ht sub - upos = ht_lookup_host_capability(dev); - + /* here we need to figure out if dev is a ht bridge + if it is ht bridge, we need to call ht_setup_chainx at first + Not verified --- yhlu + */ + uint8_t upos; + upos = ht_lookup_host_capability(dev); // one func one ht sub if (upos) { // sub ht chain uint8_t busn; busn = (new_bus & 0xff); @@ -390,7 +367,7 @@
buses = (buses & 0xff00ffff) | ((unsigned int) (new_bus & 0xff) << 16); - pci_write_config32(dev, PCI_PRIMARY_BUS, buses); + pci_write_config32(dev, PCI_PRIMARY_BUS, buses);
pci_write_config16(dev, PCI_COMMAND, cr);
@@ -405,7 +382,6 @@ * time probing another function. * Skip to next device. */ - if ( ((devfn & 0x07) == 0x00) && ((hdr_type & 0x80) != 0x80)) { devfn += 0x07; @@ -422,9 +398,7 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid) #endif { - // execute this function even with HT_CHAIN_UNITID_BASE == 0, - // because of the end_of_chain check, and we need it to - // optimize the links + //even HT_CHAIN_UNITID_BASE == 0, we still can go through this function, because of end_of_chain check, also We need it to optimize link
uint8_t next_unitid, last_unitid; unsigned uoffs; @@ -434,8 +408,7 @@ #endif
#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE - // record the device id of last ht device, so we can set the - // unit id to HT_CHAIN_END_UNITID_BASE + //let't record the device of last ht device, So we can set the Unitid to HT_CHAIN_END_UNITID_BASE unsigned real_last_unitid; uint8_t real_last_pos; int ht_dev_num = 0; @@ -519,17 +492,15 @@
next_unitid += count;
- /* Find which side of the ht link we are on, by reading - * which direction our last write to PCI_CAP_FLAGS came - * from. + /* Find which side of the ht link we are on, + * by reading which direction our last write to PCI_CAP_FLAGS + * came from. */ flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS); offs = ((flags>>10) & 1) ? PCI_HT_SLAVE1_OFFS : PCI_HT_SLAVE0_OFFS;
#if RAMINIT_SYSINFO == 1 - /* store the link pair here and we will setup the - * Hypertransport link later, after we get final FID/VID - */ + /* store the link pair here and we will Setup the Hypertransport link later, after we get final FID/VID */ { struct link_pair_st *link_pair = &sysinfo->link_pair[sysinfo->link_pair_num]; link_pair->udev = udev; @@ -544,7 +515,7 @@ reset_needed |= ht_optimize_link(udev, upos, uoffs, dev, pos, offs); #endif
- /* Remember the location of the last device */ + /* Remeber the location of the last device */ udev = dev; upos = pos; uoffs = ( offs != PCI_HT_SLAVE0_OFFS ) ? PCI_HT_SLAVE0_OFFS : PCI_HT_SLAVE1_OFFS; @@ -586,8 +557,6 @@
}
- - #if RAMINIT_SYSINFO == 1 static void ht_setup_chain(device_t udev, unsigned upos, struct sys_info *sysinfo) #else @@ -618,10 +587,7 @@ return ht_setup_chainx(udev, upos, 0, offset_unitid); #endif } - - -static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, - uint8_t linkt, uint8_t val) +static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, uint8_t linkt, uint8_t val) { uint32_t dword, dword_old; uint8_t link_type; @@ -630,17 +596,16 @@ dword = pci_read_config32(PCI_DEV(0,0x18+node,0), 0x98 + (linkn * 0x20)); link_type = dword & 0xff; - dword_old = dword = pci_read_config32(PCI_DEV(0,0x18+node,3), 0xdc); - /* coherent link only linkt = 3, non coherent = 7*/ - if ( (link_type & 7) == linkt ) { + if ( (link_type & 7) == linkt ) { /* Coherent Link only linkt = 3, ncoherent = 7*/ + dword_old = dword = pci_read_config32(PCI_DEV(0,0x18+node,3), 0xdc); dword &= ~( 0xff<<(linkn *8) ); dword |= val << (linkn *8); - } - if (dword != dword_old) { - pci_write_config32(PCI_DEV(0,0x18+node,3), 0xdc, dword); - return 1; + if (dword != dword_old) { + pci_write_config32(PCI_DEV(0,0x18+node,3), 0xdc, dword); + return 1; + } } return 0; @@ -658,14 +623,22 @@ uint8_t nodeid, linkn; uint8_t busn; uint8_t val; + unsigned devn = 1;
+ #if HT_CHAIN_UNITID_BASE != 1 + #if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1 + if(i==0) // to check if it is sb ht chain + #endif + devn = HT_CHAIN_UNITID_BASE; + #endif + reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4); nodeid = ((reg & 0xf0)>>4); // nodeid linkn = ((reg & 0xf00)>>8); // link n busn = (reg & 0xff0000)>>16; //busn - - reg = pci_read_config32( PCI_DEV(busn, 1, 0), PCI_VENDOR_ID); + + reg = pci_read_config32( PCI_DEV(busn, devn, 0), PCI_VENDOR_ID); // ? the chain dev maybe offseted if ( (reg & 0xffff) == PCI_VENDOR_ID_AMD) { val = 0x25; } else if ( (reg & 0xffff) == PCI_VENDOR_ID_NVIDIA ) { @@ -681,18 +654,79 @@ return reset_needed; }
+static int set_ht_link_buffer_count(uint8_t node, uint8_t linkn, uint8_t linkt, unsigned val) +{ + uint32_t dword; + uint8_t link_type; + unsigned regpos; + device_t dev; + + /* This works on an Athlon64 because unimplemented links return 0 */ + regpos = 0x98 + (linkn * 0x20); + dev = PCI_DEV(0,0x18+node,0); + dword = pci_read_config32(dev, regpos); + link_type = dword & 0xff; + + if ( (link_type & 0x7) == linkt ) { /* Coherent Link only linkt = 3, ncoherent = 7*/ + regpos = 0x90 + (linkn * 0x20); + dword = pci_read_config32(dev, regpos ); + + if (dword != val) { + pci_write_config32(dev, regpos, val); + return 1; + } + } + + return 0; +} +static int set_ht_link_buffer_counts_chain(uint8_t ht_c_num, unsigned vendorid, unsigned val) +{ + int reset_needed; + uint8_t i; + + reset_needed = 0; + + for (i = 0; i < ht_c_num; i++) { + uint32_t reg; + uint8_t nodeid, linkn; + uint8_t busn; + unsigned devn = 1; + + #if HT_CHAIN_UNITID_BASE != 1 + #if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1 + if(i==0) // to check if it is sb ht chain + #endif + devn = HT_CHAIN_UNITID_BASE; + #endif + + reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4); + if((reg & 3) != 3) continue; // not enabled + + nodeid = ((reg & 0xf0)>>4); // nodeid + linkn = ((reg & 0xf00)>>8); // link n + busn = (reg & 0xff0000)>>16; //busn + + reg = pci_read_config32( PCI_DEV(busn, devn, 0), PCI_VENDOR_ID); //1? + if ( (reg & 0xffff) == vendorid ) { + reset_needed |= set_ht_link_buffer_count(nodeid, linkn, 0x07,val); + } + } + + return reset_needed; +} + + #if RAMINIT_SYSINFO == 1 static void ht_setup_chains(uint8_t ht_c_num, struct sys_info *sysinfo) #else static int ht_setup_chains(uint8_t ht_c_num) #endif { - /* Assumption: The HT chain that is bus 0 has the HT I/O Hub on it. - * On most boards this just happens. If a cpu has multiple - * non coherent links the appropriate bus registers for the + /* Assumption the HT chain that is bus 0 has the HT I/O Hub on it. + * On most boards this just happens. If a cpu has multiple + * non Coherent links the appropriate bus registers for the * links needs to be programed to point at bus 0. */ - uint8_t upos; device_t udev; uint8_t i; @@ -717,14 +751,9 @@ reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4);
- // We need to setup 0x94, 0xb4, and 0xd4 according to reg - - // nodeid; it will decide 0x18 or 0x19 - devpos = ((reg & 0xf0)>>4)+0x18; - - // link n; it will decide 0x94 or 0xb4, 0x0xd4; - regpos = ((reg & 0xf00)>>8) * 0x20 + 0x94; - + //We need setup 0x94, 0xb4, and 0xd4 according to the reg + devpos = ((reg & 0xf0)>>4)+0x18; // nodeid; it will decide 0x18 or 0x19 + regpos = ((reg & 0xf00)>>8) * 0x20 + 0x94; // link n; it will decide 0x94 or 0xb4, 0x0xd4; busn = (reg & 0xff0000)>>16; dword = pci_read_config32( PCI_DEV(0, devpos, 0), regpos) ; @@ -753,15 +782,12 @@ #endif
#if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1) - /* You can not use use this in romcc, because recursive - * function calls in romcc will kill you - */ + /* You can use use this in romcc, because there is function call in romcc, recursive will kill you */ bus = busn; // we need 32 bit #if RAMINIT_SYSINFO == 1 scan_pci_bus(bus, sysinfo); #else - // take out reset_needed that is stored in upword - reset_needed |= (scan_pci_bus(bus)>>16); + reset_needed |= (scan_pci_bus(bus)>>16); // take out reset_needed that stored in upword #endif #endif } @@ -774,12 +800,10 @@
}
-static inline unsigned get_nodes(void) -{ - return ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1; -} +#if defined (__GNUC__) +static inline unsigned get_nodes(void); +#endif
- #if RAMINIT_SYSINFO == 1 static void ht_setup_chains_x(struct sys_info *sysinfo) #else @@ -803,15 +827,14 @@ /* update PCI_DEV(0, 0x18, 1) 0xe0 to 0x05000m03, and next_busn=0x3f+1 */ print_linkn_in("SBLink=", ((reg>>8) & 3) ); #if RAMINIT_SYSINFO == 1 - sysinfo->sblnk = (reg>>8) & 3; + sysinfo->sblk = (reg>>8) & 3; sysinfo->sbbusn = 0; sysinfo->nodes = nodes; #endif tempreg = 3 | ( 0<<4) | (((reg>>8) & 3)<<8) | (0<<16)| (0x3f<<24); pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0, tempreg);
- /* 0 will be used ht chain with SB we need to keep SB in bus 0 in auto stage */ - next_busn=0x3f+1; + next_busn=0x3f+1; /* 0 will be used ht chain with SB we need to keep SB in bus0 in auto stage*/
#if K8_ALLOCATE_IO_RANGE == 1 /* io range allocation */ @@ -825,9 +848,12 @@ /* clean others */ for(ht_c_num=1;ht_c_num<4; ht_c_num++) { pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4, 0); + +#if K8_ALLOCATE_IO_RANGE == 1 /* io range allocation */ pci_write_config32(PCI_DEV(0, 0x18, 1), 0xc4 + ht_c_num * 8, 0); pci_write_config32(PCI_DEV(0, 0x18, 1), 0xc0 + ht_c_num * 8, 0); +#endif }
for(nodeid=0; nodeid<nodes; nodeid++) { @@ -836,67 +862,38 @@ dev = PCI_DEV(0, 0x18+nodeid,0); for(linkn = 0; linkn<3; linkn++) { unsigned regpos; - regpos = 0x98 + 0x20 * linkn; reg = pci_read_config32(dev, regpos); - - /* skip if link is non conherent or not connected*/ - if ((reg & 0x17) != 7) continue; - - print_linkn_in("NC node|link=", - ((nodeid & 0xf)<<4)|(linkn & 0xf)); - + if ((reg & 0x17) != 7) continue; /* it is not non conherent or not connected*/ + print_linkn_in("NC node|link=", ((nodeid & 0xf)<<4)|(linkn & 0xf)); tempreg = 3 | (nodeid <<4) | (linkn<<8); - - /* compare (temp & 0xffff) with - * (PCI(0, 0x18, 1) 0xe0 to 0xec & 0xfffff) - */ + /*compare (temp & 0xffff), with (PCI(0, 0x18, 1) 0xe0 to 0xec & 0xfffff) */ for(ht_c_num=0;ht_c_num<4; ht_c_num++) { - reg = pci_read_config32( PCI_DEV(0, 0x18, 1), - 0xe0 + ht_c_num * 4); - - if ( ((reg & 0xffff) == (tempreg & 0xffff)) - || ((reg & 0xffff) == 0x0000) ) { - /*we got it*/ + reg = pci_read_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4); + if(((reg & 0xffff) == (tempreg & 0xffff)) || ((reg & 0xffff) == 0x0000)) { /*we got it*/ break; } } - - /* used up the maximum allowed 4 non conherent links */ - if(ht_c_num == 4) break; - - /* update to 0xe0...*/ - if((reg & 0xf) == 3) continue; /* SbLink so don't touch it */ - + if(ht_c_num == 4) break; /*used up only 4 non conherent allowed*/ + /*update to 0xe0...*/ + if((reg & 0xf) == 3) continue; /*SbLink so don't touch it */ print_linkn_in("\tbusn=", next_busn); - tempreg |= (next_busn<<16)|((next_busn+0x3f)<<24); - pci_write_config32(PCI_DEV(0, 0x18, 1), - 0xe0 + ht_c_num * 4, tempreg); - + pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4, tempreg); next_busn+=0x3f+1;
#if K8_ALLOCATE_IO_RANGE == 1 /* io range allocation */ - - // limit - tempreg = nodeid | (linkn<<4) | ((next_io_base+0x3)<<12); - pci_write_config32( PCI_DEV(0, 0x18, 1), - 0xC4 + ht_c_num * 8, tempreg); - - // base :ISA and VGA ? - tempreg = 3 /*| ( 3<<4)*/ | (next_io_base<<12); - pci_write_config32(PCI_DEV(0, 0x18, 1), - 0xC0 + ht_c_num * 8, tempreg); - + tempreg = nodeid | (linkn<<4) | ((next_io_base+0x3)<<12); //limit + pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC4 + ht_c_num * 8, tempreg); + tempreg = 3 /*| ( 3<<4)*/ | (next_io_base<<12); //base :ISA and VGA ? + pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC0 + ht_c_num * 8, tempreg); next_io_base += 0x3+0x1; #endif + } } - - /* update 0xe0, 0xe4, 0xe8, 0xec from PCI_DEV(0, 0x18,1) - * to PCI_DEV(0, 0x19,1) to PCI_DEV(0, 0x1f,1); - */ + /*update 0xe0, 0xe4, 0xe8, 0xec from PCI_DEV(0, 0x18,1) to PCI_DEV(0, 0x19,1) to PCI_DEV(0, 0x1f,1);*/
for(nodeid = 1; nodeid<nodes; nodeid++) { int i; @@ -938,6 +935,7 @@ #if RAMINIT_SYSINFO == 1 sysinfo->ht_c_num = i; ht_setup_chains(i, sysinfo); + sysinfo->sbdn = get_sbdn(sysinfo->sbbusn); #else return ht_setup_chains(i); #endif @@ -947,7 +945,7 @@ #if RAMINIT_SYSINFO == 1 static int optimize_link_incoherent_ht(struct sys_info *sysinfo) { - // We need to use the recorded link pair info to optimize the link + // We need to use recorded link pair info to optimize the link int i; int reset_needed = 0; @@ -955,12 +953,10 @@
for(i=0; i< link_pair_num; i++) { struct link_pair_st *link_pair= &sysinfo->link_pair[i]; - reset_needed |= ht_optimize_link(link_pair->udev, - link_pair->upos, link_pair->uoffs, - link_pair->dev, link_pair->pos, link_pair->offs); + reset_needed |= ht_optimize_link(link_pair->udev, link_pair->upos, link_pair->uoffs, link_pair->dev, link_pair->pos, link_pair->offs); }
- reset_needed |= optimize_link_read_pointers(sysinfo->ht_c_num); + reset_needed |= optimize_link_read_pointers_chain(sysinfo->ht_c_num);
return reset_needed;
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/misc_control.c =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/misc_control.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/misc_control.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -121,6 +121,7 @@ cmd = pci_read_config32(dev, 0x44); cmd |= (1<<6) | (1<<25); pci_write_config32(dev, 0x44, cmd ); +#if K8_REV_F_SUPPORT == 0 if (is_cpu_pre_c0()) {
/* Errata 58 @@ -177,6 +178,7 @@ needs_reset = 1; /* Needed? */ } } +#endif /* Optimize the Link read pointers */ f0_dev = dev_find_slot(0, dev->path.u.pci.devfn - 3); if (f0_dev) {
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/northbridge.c =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/northbridge.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/northbridge.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -30,10 +30,14 @@
#include "amdk8.h"
-#if K8_HW_MEM_HOLE_SIZEK != 0 +#if HW_MEM_HOLE_SIZEK != 0 #include <cpu/amd/model_fxx_rev.h> #endif
+#include <cpu/amd/amdk8_sysconf.h> + +struct amdk8_sysconf_t sysconf; + #define FX_DEVS 8 static device_t __f0_dev[FX_DEVS]; static device_t __f1_dev[FX_DEVS]; @@ -97,8 +101,6 @@ return (dev->path.u.pci.devfn >> 3) - 0x18; }
-unsigned hcdn_reg[4]; // it will be used by get_sblk_pci1234 - static unsigned int amdk8_scan_chain(device_t dev, unsigned nodeid, unsigned link, unsigned sblink, unsigned int max, unsigned offset_unitid) { #if 0 @@ -160,17 +162,17 @@ * We have no idea how many busses are behind this bridge yet, * so we set the subordinate bus number to 0xff for the moment. */ -#if K8_SB_HT_CHAIN_ON_BUS0 > 0 +#if SB_HT_CHAIN_ON_BUS0 > 0 // first chain will on bus 0 if((nodeid == 0) && (sblink==link)) { // actually max is 0 here min_bus = max; } - #if K8_SB_HT_CHAIN_ON_BUS0 > 1 + #if SB_HT_CHAIN_ON_BUS0 > 1 // second chain will be on 0x40, third 0x80, forth 0xc0 else { - min_bus = ((max>>6) + 1) * 0x40; + min_bus = ((max>>6) + 1) * 0x40; } - max = min_bus; + max = min_bus; #else //other ... else { @@ -248,7 +250,7 @@ temp |= (ht_unitid_base[i] & 0xff) << (i*8); }
- hcdn_reg[index] = temp; + sysconf.hcdn_reg[index] = temp;
}
@@ -277,7 +279,7 @@
if(nodeid==0) { sblink = (pci_read_config32(dev, 0x64)>>8) & 3; -#if K8_SB_HT_CHAIN_ON_BUS0 > 0 +#if SB_HT_CHAIN_ON_BUS0 > 0 #if HT_CHAIN_UNITID_BASE != 1 offset_unitid = 1; #endif @@ -286,7 +288,7 @@ }
for(link = 0; link < dev->links; link++) { -#if K8_SB_HT_CHAIN_ON_BUS0 > 0 +#if SB_HT_CHAIN_ON_BUS0 > 0 if( (nodeid == 0) && (sblink == link) ) continue; //already done #endif offset_unitid = 0; @@ -773,7 +775,7 @@ #define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH) #endif
-#if K8_HW_MEM_HOLE_SIZEK != 0 +#if HW_MEM_HOLE_SIZEK != 0
struct hw_mem_hole_info { unsigned hole_startk; @@ -785,7 +787,7 @@ struct hw_mem_hole_info mem_hole; int i;
- mem_hole.hole_startk = K8_HW_MEM_HOLE_SIZEK; + mem_hole.hole_startk = HW_MEM_HOLE_SIZEK; mem_hole.node_id = -1;
for (i = 0; i < 8; i++) { @@ -931,7 +933,7 @@ unsigned long mmio_basek; uint32_t pci_tolm; int i, idx; -#if K8_HW_MEM_HOLE_SIZEK != 0 +#if HW_MEM_HOLE_SIZEK != 0 struct hw_mem_hole_info mem_hole; unsigned reset_memhole = 1; #endif @@ -1015,12 +1017,14 @@ mmio_basek &= ~((64*1024) - 1); #endif
-#if K8_HW_MEM_HOLE_SIZEK != 0 +#if HW_MEM_HOLE_SIZEK != 0 /* if the hw mem hole is already set in raminit stage, here we will compare mmio_basek and hole_basek * if mmio_basek is bigger that hole_basek and will use hole_basek as mmio_basek and we don't need to reset hole. * otherwise We reset the hole to the mmio_basek */ + #if K8_REV_F_SUPPORT == 0 if (!is_cpu_pre_e0()) { + #endif
mem_hole = get_hw_mem_hole_info();
@@ -1032,13 +1036,13 @@ //mmio_basek = 3*1024*1024; // for debug to meet boundary
if(reset_memhole) { - if(mem_hole.node_id!=-1) { // We need to select K8_HW_MEM_HOLE_SIZEK for raminit, it can not make hole_startk to some basek too....! + if(mem_hole.node_id!=-1) { // We need to select HW_MEM_HOLE_SIZEK for raminit, it can not make hole_startk to some basek too....! // We need to reset our Mem Hole, because We want more big HOLE than we already set //Before that We need to disable mem hole at first, becase memhole could already be set on i+1 instead disable_hoist_memory(mem_hole.hole_startk, mem_hole.node_id); }
- #if K8_HW_MEM_HOLE_SIZE_AUTO_INC == 1 + #if HW_MEM_HOLE_SIZE_AUTO_INC == 1 //We need to double check if the mmio_basek is valid for hole setting, if it is equal to basek, we need to decrease it some uint32_t basek_pri; for (i = 0; i < 8; i++) { @@ -1059,7 +1063,9 @@ #endif }
+#if K8_REV_F_SUPPORT == 0 } // is_cpu_pre_e0 +#endif
#endif
@@ -1098,9 +1104,11 @@ idx += 0x10; sizek -= pre_sizek; } - #if K8_HW_MEM_HOLE_SIZEK != 0 + #if HW_MEM_HOLE_SIZEK != 0 if(reset_memhole) + #if K8_REV_F_SUPPORT == 0 if(!is_cpu_pre_e0() ) + #endif sizek += hoist_memory(mmio_basek,i); #endif @@ -1139,7 +1147,6 @@ f0_dev = __f0_dev[i]; if (f0_dev && f0_dev->enabled) { uint32_t httc; - int j; httc = pci_read_config32(f0_dev, HT_TRANSACTION_CONTROL); httc &= ~HTTC_RSP_PASS_PW; if (!dev->link[0].disable_relaxed_ordering) { @@ -1169,24 +1176,20 @@ struct bus *cpu_bus; device_t dev_mc; int bsp_apicid; - int apicid_offset; int i,j; - int nodes; unsigned nb_cfg_54; - int enable_apic_ext_id; unsigned siblings; int e0_later_single_core; int disable_siblings; - unsigned lift_bsp_apicid;
nb_cfg_54 = 0; - enable_apic_ext_id = 0; - lift_bsp_apicid = 0; + sysconf.enabled_apic_ext_id = 0; + sysconf.lift_bsp_apicid = 0; siblings = 0;
/* Find the bootstrap processors apicid */ bsp_apicid = lapicid(); - apicid_offset = bsp_apicid; + sysconf.apicid_offset = bsp_apicid;
disable_siblings = !CONFIG_LOGICAL_CPUS; #if CONFIG_LOGICAL_CPUS == 1 @@ -1203,24 +1206,25 @@ die("0:18.0 not found?"); }
- nodes = ((pci_read_config32(dev_mc, 0x60)>>4) & 7) + 1; + sysconf.nodes = ((pci_read_config32(dev_mc, 0x60)>>4) & 7) + 1; +
if (pci_read_config32(dev_mc, 0x68) & (HTTC_APIC_EXT_ID|HTTC_APIC_EXT_BRD_CST)) { - enable_apic_ext_id = 1; + sysconf.enabled_apic_ext_id = 1; if(bsp_apicid == 0) { /* bsp apic id is not changed */ - apicid_offset = APIC_ID_OFFSET; + sysconf.apicid_offset = APIC_ID_OFFSET; } else { - lift_bsp_apicid = 1; + sysconf.lift_bsp_apicid = 1; } }
/* Find which cpus are present */ cpu_bus = &dev->link[0]; - for(i = 0; i < nodes; i++) { + for(i = 0; i < sysconf.nodes; i++) { device_t dev, cpu; struct device_path cpu_path;
@@ -1262,7 +1266,11 @@ // That is the typical case
if(j == 0 ){ + #if K8_REV_F_SUPPORT == 0 e0_later_single_core = is_e0_later_in_bsp(i); // single core + #else + e0_later_single_core = is_cpu_f0_in_bsp(i); // We can read cpuid(1) from Func3 + #endif } else { e0_later_single_core = 0; } @@ -1321,13 +1329,13 @@ if (cpu) { cpu->path.u.apic.node_id = i; cpu->path.u.apic.core_id = j; - if(enable_apic_ext_id) { - if(lift_bsp_apicid) { - cpu->path.u.apic.apic_id += apicid_offset; + if(sysconf.enabled_apic_ext_id) { + if(sysconf.lift_bsp_apicid) { + cpu->path.u.apic.apic_id += sysconf.apicid_offset; } else { if (cpu->path.u.apic.apic_id != 0) - cpu->path.u.apic.apic_id += apicid_offset; + cpu->path.u.apic.apic_id += sysconf.apicid_offset; } } printk_debug("CPU: %s %s\n",
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit.c =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -18,7 +18,7 @@ #define K8_4RANK_DIMM_SUPPORT 0 #endif
-#if USE_DCACHE_RAM == 1 +#if defined (__GNUC__) static void hard_reset(void); #endif
@@ -44,8 +44,8 @@ print_debug("\r\n"); #endif #endif - dev = register_values[i] & ~0xff; - where = register_values[i] & 0xff; + dev = register_values[i] & ~0xfff; + where = register_values[i] & 0xfff; reg = pci_read_config32(dev, where); reg &= register_values[i+1]; reg |= register_values[i+2]; @@ -555,8 +555,8 @@ print_spew("\r\n"); #endif #endif - dev = (register_values[i] & ~0xff) - PCI_DEV(0, 0x18, 0) + ctrl->f0; - where = register_values[i] & 0xff; + dev = (register_values[i] & ~0xfff) - PCI_DEV(0, 0x18, 0) + ctrl->f0; + where = register_values[i] & 0xfff; reg = pci_read_config32(dev, where); reg &= register_values[i+1]; reg |= register_values[i+2]; @@ -886,7 +886,7 @@
/* Now set top of memory */ msr_t msr; - if(tom_k>(4*1024*1024)) { + if(tom_k > (4*1024*1024)) { msr.lo = (tom_k & 0x003fffff) << 10; msr.hi = (tom_k & 0xffc00000) >> 22; wrmsr(TOP_MEM2, msr); @@ -896,7 +896,7 @@ * so I can see my rom chip and other I/O devices. */ if (tom_k >= 0x003f0000) { -#if K8_HW_MEM_HOLE_SIZEK != 0 +#if HW_MEM_HOLE_SIZEK != 0 if(hole_startk != 0) { tom_k = hole_startk; } else @@ -2183,7 +2183,7 @@ return; }
-#if K8_HW_MEM_HOLE_SIZEK != 0 +#if HW_MEM_HOLE_SIZEK != 0 static uint32_t hoist_memory(int controllers, const struct mem_controller *ctrl,unsigned hole_startk, int i) { int ii; @@ -2242,9 +2242,9 @@ uint32_t hole_startk; int i;
- hole_startk = 4*1024*1024 - K8_HW_MEM_HOLE_SIZEK; + hole_startk = 4*1024*1024 - HW_MEM_HOLE_SIZEK;
-#if K8_HW_MEM_HOLE_SIZE_AUTO_INC == 1 +#if HW_MEM_HOLE_SIZE_AUTO_INC == 1 //We need to double check if the hole_startk is valid, if it is equal to basek, we need to decrease it some uint32_t basek_pri; for(i=0; i<controllers; i++) { @@ -2388,7 +2388,7 @@ print_debug(" done\r\n"); }
-#if K8_HW_MEM_HOLE_SIZEK != 0 +#if HW_MEM_HOLE_SIZEK != 0 // init hw mem hole here /* DramHoleValid bit only can be set after MemClrStatus is set by Hardware */ if(!is_cpu_pre_e0()) @@ -2450,6 +2450,10 @@
} #if USE_DCACHE_RAM == 1 +static void set_sysinfo_in_ram(unsigned val) +{ +} + static void fill_mem_ctrl(int controllers, struct mem_controller *ctrl_a, const uint16_t *spd_addr) { int i;
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit.h =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit.h 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -1,6 +1,8 @@ #ifndef RAMINIT_H #define RAMINIT_H
+#define NODE_NUMS 8 + #define DIMM_SOCKETS 4 struct mem_controller { unsigned node_id; @@ -9,5 +11,4 @@ uint16_t channel1[DIMM_SOCKETS]; };
- #endif /* RAMINIT_H */
Added: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit_f.c =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit_f.c (rev 0) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit_f.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,3065 @@ +/* This should be done by Eric + 2004.11 yhlu add 4 rank DIMM support + 2004.12 yhlu add D0 support + 2005.02 yhlu add E0 memory hole support + 2005.10 yhlu make it support DDR2 only +*/ + +#include <cpu/x86/mem.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/mtrr.h> +#include <cpu/x86/tsc.h> + +#include "raminit.h" +#include "amdk8_f.h" +#include "spd_ddr2.h" + +#ifndef QRANK_DIMM_SUPPORT +#define QRANK_DIMM_SUPPORT 0 +#endif + +static inline void print_raminit(const char *strval, uint32_t val) +{ +#if CONFIG_USE_INIT + printk_debug("%s:%08x\r\n", strval, val); +#else + print_debug(strval); print_debug_hex32(val); print_debug("\r\n"); +#endif +} + +#define RAM_TIMING_DEBUG 0 + +static inline void print_tx(const char *strval, uint32_t val) +{ +#if RAM_TIMING_DEBUG == 1 + print_raminit(strval, val); +#endif +} + + +static inline void print_t(const char *strval) +{ +#if RAM_TIMING_DEBUG == 1 + print_debug(strval); +#endif +} + + + +#if (CONFIG_LB_MEM_TOPK & (CONFIG_LB_MEM_TOPK -1)) != 0 +# error "CONFIG_LB_MEM_TOPK must be a power of 2" +#endif + +#include "amdk8_f_pci.c" + + + // for PCI_ADDR(0, 0x18, 2, 0x98) index, and PCI_ADDR(0x, 0x18, 2, 0x9c) data + /* + index: + [29: 0] DctOffset (Dram Controller Offset) + [30:30] DctAccessWrite (Dram Controller Read/Write Select) + 0 = read access + 1 = write access + [31:31] DctAccessDone (Dram Controller Access Done) + 0 = Access in progress + 1 = No access is progress + + Data: + [31: 0] DctOffsetData (Dram Controller Offset Data) + + Read: + - Write the register num to DctOffset with DctAccessWrite = 0 + - poll the DctAccessDone until it = 1 + - Read the data from DctOffsetData + Write: + - Write the data to DctOffsetData + - Write register num to DctOffset with DctAccessWrite = 1 + - poll the DctAccessDone untio it = 1 + + */ + + +#if 1 +static void setup_resource_map(const unsigned int *register_values, int max) +{ + int i; + + for(i = 0; i < max; i += 3) { + device_t dev; + unsigned where; + unsigned long reg; + + dev = register_values[i] & ~0xff; + where = register_values[i] & 0xff; + reg = pci_read_config32(dev, where); + reg &= register_values[i+1]; + reg |= register_values[i+2]; + pci_write_config32(dev, where, reg); + } +} +#endif + +static int controller_present(const struct mem_controller *ctrl) +{ + return pci_read_config32(ctrl->f0, 0) == 0x11001022; +} + +static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_info *sysinfo) +{ + static const unsigned int register_values[] = { + + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* DRAM CS Base Address i Registers + * F2:0x40 i = 0 + * F2:0x44 i = 1 + * F2:0x48 i = 2 + * F2:0x4C i = 3 + * F2:0x50 i = 4 + * F2:0x54 i = 5 + * F2:0x58 i = 6 + * F2:0x5C i = 7 + * [ 0: 0] Chip-Select Bank Enable + * 0 = Bank Disabled + * 1 = Bank Enabled + * [ 1: 1] Spare Rank + * [ 2: 2] Memory Test Failed + * [ 4: 3] Reserved + * [13: 5] Base Address (21-13) + * An optimization used when all DIMM are the same size... + * [18:14] Reserved + * [28:19] Base Address (36-27) + * This field defines the top 11 addresses bit of a 40-bit + * address that define the memory address space. These + * bits decode 32-MByte blocks of memory. + * [31:29] Reserved + */ + PCI_ADDR(0, 0x18, 2, 0x40), 0xe007c018, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x44), 0xe007c018, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x48), 0xe007c018, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x4C), 0xe007c018, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x50), 0xe007c018, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x54), 0xe007c018, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x58), 0xe007c018, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x5C), 0xe007c018, 0x00000000, + /* DRAM CS Mask Address i Registers + * F2:0x60 i = 0,1 + * F2:0x64 i = 2,3 + * F2:0x68 i = 4,5 + * F2:0x6C i = 6,7 + * Select bits to exclude from comparison with the DRAM Base address register. + * [ 4: 0] Reserved + * [13: 5] Address Mask (21-13) + * Address to be excluded from the optimized case + * [18:14] Reserved + * [28:19] Address Mask (36-27) + * The bits with an address mask of 1 are excluded from address comparison + * [31:29] Reserved + * + */ + PCI_ADDR(0, 0x18, 2, 0x60), 0xe007c01f, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x64), 0xe007c01f, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x68), 0xe007c01f, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x6C), 0xe007c01f, 0x00000000, + + /* DRAM Control Register + * F2:0x78 + * [ 3: 0] RdPtrInit ( Read Pointer Initial Value) + * 0x03-0x00: reserved + * [ 6: 4] RdPadRcvFifoDly (Read Delay from Pad Receive FIFO) + * 000 = reserved + * 001 = reserved + * 010 = 1.5 Memory Clocks + * 011 = 2 Memory Clocks + * 100 = 2.5 Memory Clocks + * 101 = 3 Memory Clocks + * 110 = 3.5 Memory Clocks + * 111 = Reseved + * [15: 7] Reserved + * [16:16] AltVidC3MemClkTriEn (AltVID Memory Clock Tristate Enable) + * Enables the DDR memory clocks to be tristated when alternate VID mode is enabled. This bit has no effect if the DisNbClkRamp bit (F3, 0x88) is set + * [17:17] DllTempAdjTime (DLL Temperature Adjust Cycle Time) + * 0 = 5 ms + * 1 = 1 ms + * [18:18] DqsRcvEnTrain (DQS Receiver Enable Training Mode) + * 0 = Normal DQS Receiver enable operation + * 1 = DQS receiver enable training mode + * [31:19] reverved + */ + PCI_ADDR(0, 0x18, 2, 0x78), 0xfff80000, (6<<4)|(6<<0), + + /* DRAM Initialization Register + * F2:0x7C + * [15: 0] MrsAddress (Address for MRS/EMRS Commands) + * this field specifies the dsata driven on the DRAM address pins 15-0 for MRS and EMRS commands + * [18:16] MrsBank (Bank Address for MRS/EMRS Commands) + * this files specifies the data driven on the DRAM bank pins for the MRS and EMRS commands + * [23:19] reverved + * [24:24] SendPchgAll (Send Precharge All Command) + * Setting this bit causes the DRAM controller to send a precharge all command. This bit is cleared by the hardware after the command completes + * [25:25] SendAutoRefresh (Send Auto Refresh Command) + * Setting this bit causes the DRAM controller to send an auto refresh command. This bit is cleared by the hardware after the command completes + * [26:26] SendMrsCmd (Send MRS/EMRS Command) + * Setting this bit causes the DRAM controller to send the MRS or EMRS command defined by the MrsAddress and MrsBank fields. This bit is cleared by the hardware adter the commmand completes + * [27:27] DeassertMemRstX (De-assert Memory Reset) + * Setting this bit causes the DRAM controller to de-assert the memory reset pin. This bit cannot be used to assert the memory reset pin + * [28:28] AssertCke (Assert CKE) + * setting this bit causes the DRAM controller to assert the CKE pins. This bit cannot be used to de-assert the CKE pins + * [30:29] reverved + * [31:31] EnDramInit (Enable DRAM Initialization) + * Setting this bit puts the DRAM controller in a BIOS controlled DRAM initialization mode. BIOS must clear this bit aster DRAM initialization is complete. + */ +// PCI_ADDR(0, 0x18, 2, 0x7C), 0x60f80000, 0, + + + /* DRAM Bank Address Mapping Register + * F2:0x80 + * Specify the memory module size + * [ 3: 0] CS1/0 + * [ 7: 4] CS3/2 + * [11: 8] CS5/4 + * [15:12] CS7/6 + * [31:16] + row col bank + 0: 13 9 2 :128M + 1: 13 10 2 :256M + 2: 14 10 2 :512M + 3: 13 11 2 :512M + 4: 13 10 3 :512M + 5: 14 10 3 :1G + 6: 14 11 2 :1G + 7: 15 10 3 :2G + 8: 14 11 3 :2G + 9: 15 11 3 :4G + 10: 16 10 3 :4G + 11: 16 11 3 :8G + */ + PCI_ADDR(0, 0x18, 2, 0x80), 0xffff0000, 0x00000000, + /* DRAM Timing Low Register + * F2:0x88 + * [ 2: 0] Tcl (Cas# Latency, Cas# to read-data-valid) + * 000 = reserved + * 001 = reserved + * 010 = CL 3 + * 011 = CL 4 + * 100 = CL 5 + * 101 = CL 6 + * 110 = reserved + * 111 = reserved + * [ 3: 3] Reserved + * [ 5: 4] Trcd (Ras#-active to Cas# read/write delay) + * 00 = 3 clocks + * 01 = 4 clocks + * 10 = 5 clocks + * 11 = 6 clocks + * [ 7: 6] Reserved + * [ 9: 8] Trp (Row Precharge Time, Precharge-to-Active or Auto-Refresh) + * 00 = 3 clocks + * 01 = 4 clocks + * 10 = 5 clocks + * 11 = 6 clocks + * [10:10] Reserved + * [11:11] Trtp (Read to Precharge Time, read Cas# to precharge time) + * 0 = 2 clocks for Burst Length of 32 Bytes + * 4 clocks for Burst Length of 64 Bytes + * 1 = 3 clocks for Burst Length of 32 Bytes + * 5 clocks for Burst Length of 64 Bytes + * [15:12] Tras (Minimum Ras# Active Time) + * 0000 = reserved + * 0001 = reserved + * 0010 = 5 bus clocks + * ... + * 1111 = 18 bus clocks + * [19:16] Trc (Row Cycle Time, Ras#-active to Ras#-active or auto refresh of the same bank) + * 0000 = 11 bus clocks + * 0010 = 12 bus clocks + * ... + * 1110 = 25 bus clocks + * 1111 = 26 bus clocks + * [21:20] Twr (Write Recovery Time, From the last data to precharge, writes can go back-to-back) + * 00 = 3 bus clocks + * 01 = 4 bus clocks + * 10 = 5 bus clocks + * 11 = 6 bus clocks + * [23:22] Trrd (Active-to-active (Ras#-to-Ras#) Delay of different banks) + * 00 = 2 bus clocks + * 01 = 3 bus clocks + * 10 = 4 bus clocks + * 11 = 5 bus clocks + * [31:24] MemClkDis ( Disable the MEMCLK outputs for DRAM channel A, BIOS should set it to reduce the power consumption) + * Bit F(1207) M2 Package S1g1 Package + * 0 N/A MA1_CLK1 N/A + * 1 N/A MA0_CLK1 MA0_CLK1 + * 2 MA3_CLK N/A N/A + * 3 MA2_CLK N/A N/A + * 4 MA1_CLK MA1_CLK0 N/A + * 5 MA0_CLK MA0_CLK0 MA0_CLK0 + * 6 N/A MA1_CLK2 N/A + * 7 N/A MA0_CLK2 MA0_CLK2 + */ + PCI_ADDR(0, 0x18, 2, 0x88), 0x000004c8, 0xff000002 /* 0x03623125 */ , + /* DRAM Timing High Register + * F2:0x8C + * [ 3: 0] Reserved + * [ 6: 4] TrwtTO (Read-to-Write Turnaround for Data, DQS Contention) + * 000 = 2 bus clocks + * 001 = 3 bus clocks + * 010 = 4 bus clocks + * 011 = 5 bus clocks + * 100 = 6 bus clocks + * 101 = 7 bus clocks + * 110 = 8 bus clocks + * 111 = 9 bus clocks + * [ 7: 7] Reserved + * [ 9: 8] Twtr (Internal DRAM Write-to-Read Command Delay, minium write-to-read delay when both access the same chip select) + * 00 = Reserved + * 01 = 1 bus clocks + * 10 = 2 bus clocks + * 11 = 3 bus clocks + * [11:10] Twrrd (Write to Read DIMM Termination Turnaround, minimum write-to-read delay when accessing two different DIMMs) + * 00 = 0 bus clocks + * 01 = 1 bus clocks + * 10 = 2 bus clocks + * 11 = 3 bus clocks + * [13:12] Twrwr (Write to Write Timing) + * 00 = 1 bus clocks ( 0 idle cycle on the bus) + * 01 = 2 bus clocks ( 1 idle cycle on the bus) + * 10 = 3 bus clocks ( 2 idle cycles on the bus) + * 11 = Reserved + * [15:14] Trdrd ( Read to Read Timing) + * 00 = 2 bus clocks ( 1 idle cycle on the bus) + * 01 = 3 bus clocks ( 2 idle cycles on the bus) + * 10 = 4 bus clocks ( 3 idle cycles on the bus) + * 11 = 5 bus clocks ( 4 idel cycles on the bus) + * [17:16] Tref (Refresh Rate) + * 00 = Undefined behavior + * 01 = Reserved + * 10 = Refresh interval of 7.8 microseconds + * 11 = Refresh interval of 3.9 microseconds + * [19:18] Reserved + * [22:20] Trfc0 ( Auto-Refresh Row Cycle Time for the Logical DIMM0, based on DRAM density and speed) + * 000 = 75 ns (all speeds, 256Mbit) + * 001 = 105 ns (all speeds, 512Mbit) + * 010 = 127.5 ns (all speeds, 1Gbit) + * 011 = 195 ns (all speeds, 2Gbit) + * 100 = 327.5 ns (all speeds, 4Gbit) + * 101 = reserved + * 110 = reserved + * 111 = reserved + * [25:23] Trfc1 ( Auto-Refresh Row Cycle Time for the Logical DIMM1, based on DRAM density and speed) + * [28:26] Trfc2 ( Auto-Refresh Row Cycle Time for the Logical DIMM2, based on DRAM density and speed) + * [31:29] Trfc3 ( Auto-Refresh Row Cycle Time for the Logical DIMM3, based on DRAM density and speed) + */ + PCI_ADDR(0, 0x18, 2, 0x8c), 0x000c008f, (2 << 16)|(1 << 8), + /* DRAM Config Low Register + * F2:0x90 + * [ 0: 0] InitDram (Initialize DRAM) + * 1 = write 1 cause DRAM controller to execute the DRAM initialization, when done it read to 0 + * [ 1: 1] ExitSelfRef ( Exit Self Refresh Command ) + * 1 = write 1 causes the DRAM controller to bring the DRAMs out fo self refresh mode + * [ 3: 2] Reserved + * [ 5: 4] DramTerm (DRAM Termination) + * 00 = On die termination disabled + * 01 = 75 ohms + * 10 = 150 ohms + * 11 = 50 ohms + * [ 6: 6] Reserved + * [ 7: 7] DramDrvWeak ( DRAM Drivers Weak Mode) + * 0 = Normal drive strength mode. + * 1 = Weak drive strength mode + * [ 8: 8] ParEn (Parity Enable) + * 1 = Enable address parity computation output, PAR, and enables the parity error input, ERR + * [ 9: 9] SelfRefRateEn (Faster Self Refresh Rate Enable) + * 1 = Enable high temperature ( two times normal ) self refresh rate + * [10:10] BurstLength32 ( DRAM Burst Length Set for 32 Bytes) + * 0 = 64-byte mode + * 1 = 32-byte mode + * [11:11] Width128 ( Width of DRAM interface) + * 0 = the controller DRAM interface is 64-bits wide + * 1 = the controller DRAM interface is 128-bits wide + * [12:12] X4Dimm (DIMM 0 is x4) + * [13:13] X4Dimm (DIMM 1 is x4) + * [14:14] X4Dimm (DIMM 2 is x4) + * [15:15] X4Dimm (DIMM 3 is x4) + * 0 = DIMM is not x4 + * 1 = x4 DIMM present + * [16:16] UnBuffDimm ( Unbuffered DIMMs) + * 0 = Buffered DIMMs + * 1 = Unbuffered DIMMs + * [18:17] Reserved + * [19:19] DimmEccEn ( DIMM ECC Enable ) + 1 = ECC checking is being enabled for all DIMMs on the DRAM controller ( Through F3 0x44[EccEn]) + * [31:20] Reserved + */ + PCI_ADDR(0, 0x18, 2, 0x90), 0xfff6004c, 0x00000010, + /* DRAM Config High Register + * F2:0x94 + * [ 0: 2] MemClkFreq ( Memory Clock Frequency) + * 000 = 200MHz + * 001 = 266MHz + * 010 = 333MHz + * 011 = reserved + * 1xx = reserved + * [ 3: 3] MemClkFreqVal (Memory Clock Freqency Valid) + * 1 = BIOS need to set the bit when setting up MemClkFreq to the proper value + * [ 7: 4] MaxAsyncLat ( Maximum Asynchronous Latency) + * 0000 = 0 ns + * ... + * 1111 = 15 ns + * [11: 8] Reserved + * [12:12] RDqsEn ( Read DQS Enable) This bit is only be set if x8 registered DIMMs are present in the system + * 0 = DM pins function as data mask pins + * 1 = DM pins function as read DQS pins + * [13:13] Reserved + * [14:14] DisDramInterface ( Disable the DRAM interface ) When this bit is set, the DRAM controller is disabled, and interface in low power state + * 0 = Enabled (default) + * 1 = Disabled + * [15:15] PowerDownEn ( Power Down Mode Enable ) + * 0 = Disabled (default) + * 1 = Enabled + * [16:16] PowerDown ( Power Down Mode ) + * 0 = Channel CKE Control + * 1 = Chip Select CKE Control + * [17:17] FourRankSODimm (Four Rank SO-DIMM) + * 1 = this bit is set by BIOS to indicate that a four rank SO-DIMM is present + * [18:18] FourRankRDimm (Four Rank Registered DIMM) + * 1 = this bit is set by BIOS to indicate that a four rank registered DIMM is present + * [19:19] Reserved + * [20:20] SlowAccessMode (Slow Access Mode (2T Mode)) + * 0 = DRAM address and control signals are driven for one MEMCLK cycle + * 1 = One additional MEMCLK of setup time is provided on all DRAM address and control signals except CS, CKE, and ODT; i.e., these signals are drivern for two MEMCLK cycles rather than one + * [21:21] Reserved + * [22:22] BankSwizzleMode ( Bank Swizzle Mode), + * 0 = Disabled (default) + * 1 = Enabled + * [23:23] Reserved + * [27:24] DcqBypassMax ( DRAM Controller Queue Bypass Maximum) + * 0000 = No bypass; the oldest request is never bypassed + * 0001 = The oldest request may be bypassed no more than 1 time + * ... + * 1111 = The oldest request may be bypassed no more than 15 times + * [31:28] FourActWindow ( Four Bank Activate Window) , not more than 4 banks in a 8 bank device are activated + * 0000 = No tFAW window restriction + * 0001 = 8 MEMCLK cycles + * 0010 = 9 MEMCLK cycles + * ... + * 1101 = 20 MEMCLK cycles + * 111x = reserved + */ + PCI_ADDR(0, 0x18, 2, 0x94), 0x00a82f00,0x00008000, + /* DRAM Delay Line Register + * F2:0xa0 + * [ 0: 0] MemClrStatus (Memory Clear Status) : ---------Readonly + * when set, this bit indicates that the memory clear function is complete. Only clear by reset. BIOS should not write or read the DRAM until this bit is set by hardware + * [ 1: 1] DisableJitter ( Disable Jitter) + * When set the DDR compensation circuit will not change the values unless the change is more than one step from the current value + * [ 3: 2] RdWrQByp ( Read/Write Queue Bypass Count) + * 00 = 2 + * 01 = 4 + * 10 = 8 + * 11 = 16 + * [ 4: 4] Mode64BitMux (Mismatched DIMM Support Enable) + * 1 When bit enables support for mismatched DIMMs when using 128-bit DRAM interface, the Width128 no effect, only for M2 and s1g1 + * [ 5: 5] DCC_EN ( Dynamica Idle Cycle Counter Enable) + * When set to 1, indicates that each entry in the page tables dynamically adjusts the idle cycle limit based on page Conflict/Page Miss (PC/PM) traffic + * [ 8: 6] ILD_lmt ( Idle Cycle Limit) + * 000 = 0 cycles + * 001 = 4 cycles + * 010 = 8 cycles + * 011 = 16 cycles + * 100 = 32 cycles + * 101 = 64 cycles + * 110 = 128 cycles + * 111 = 256 cycles + * [ 9: 9] DramEnabled ( DRAM Enabled) + * When Set, this bit indicates that the DRAM is enabled, this bit is set by hardware after DRAM initialization or on an exit from self refresh. The DRAM controller is intialized after the + * hardware-controlled initialization process ( initiated by the F2 0x90[DramInit]) completes or when the BIOS-controlled initialization process completes (F2 0x7c(EnDramInit] is + * written from 1 to 0) + * [23:10] Reserved + * [31:24] MemClkDis ( Disable the MEMCLK outputs for DRAM channel B, BIOS should set it to reduce the power consumption) + * Bit F(1207) M2 Package S1g1 Package + * 0 N/A MA1_CLK1 N/A + * 1 N/A MA0_CLK1 MA0_CLK1 + * 2 MA3_CLK N/A N/A + * 3 MA2_CLK N/A N/A + * 4 MA1_CLK MA1_CLK0 N/A + * 5 MA0_CLK MA0_CLK0 MA0_CLK0 + * 6 N/A MA1_CLK2 N/A + * 7 N/A MA0_CLK2 MA0_CLK2 + */ + PCI_ADDR(0, 0x18, 2, 0xa0), 0x00fffc00, 0xff000000, + + /* DRAM Scrub Control Register + * F3:0x58 + * [ 4: 0] DRAM Scrube Rate + * [ 7: 5] reserved + * [12: 8] L2 Scrub Rate + * [15:13] reserved + * [20:16] Dcache Scrub + * [31:21] reserved + * Scrub Rates + * 00000 = Do not scrub + * 00001 = 40.00 ns + * 00010 = 80.00 ns + * 00011 = 160.00 ns + * 00100 = 320.00 ns + * 00101 = 640.00 ns + * 00110 = 1.28 us + * 00111 = 2.56 us + * 01000 = 5.12 us + * 01001 = 10.20 us + * 01011 = 41.00 us + * 01100 = 81.90 us + * 01101 = 163.80 us + * 01110 = 327.70 us + * 01111 = 655.40 us + * 10000 = 1.31 ms + * 10001 = 2.62 ms + * 10010 = 5.24 ms + * 10011 = 10.49 ms + * 10100 = 20.97 ms + * 10101 = 42.00 ms + * 10110 = 84.00 ms + * All Others = Reserved + */ + PCI_ADDR(0, 0x18, 3, 0x58), 0xffe0e0e0, 0x00000000, + /* DRAM Scrub Address Low Register + * F3:0x5C + * [ 0: 0] DRAM Scrubber Redirect Enable + * 0 = Do nothing + * 1 = Scrubber Corrects errors found in normal operation + * [ 5: 1] Reserved + * [31: 6] DRAM Scrub Address 31-6 + */ + PCI_ADDR(0, 0x18, 3, 0x5C), 0x0000003e, 0x00000000, + /* DRAM Scrub Address High Register + * F3:0x60 + * [ 7: 0] DRAM Scrubb Address 39-32 + * [31: 8] Reserved + */ + PCI_ADDR(0, 0x18, 3, 0x60), 0xffffff00, 0x00000000, + }; + // for PCI_ADDR(0, 0x18, 2, 0x98) index, and PCI_ADDR(0x, 0x18, 2, 0x9c) data + /* + index: + [29: 0] DctOffset (Dram Controller Offset) + [30:30] DctAccessWrite (Dram Controller Read/Write Select) + 0 = read access + 1 = write access + [31:31] DctAccessDone (Dram Controller Access Done) + 0 = Access in progress + 1 = No access is progress + + Data: + [31: 0] DctOffsetData (Dram Controller Offset Data) + + Read: + - Write the register num to DctOffset with DctAccessWrite = 0 + - poll the DctAccessDone until it = 1 + - Read the data from DctOffsetData + Write: + - Write the data to DctOffsetData + - Write register num to DctOffset with DctAccessWrite = 1 + - poll the DctAccessDone untio it = 1 + + */ +#if 0 + static const unsigned int index_register_values[] = { + /* Output Driver Compensation Control Register + * Index: 0x00 + * [ 1: 0] CkeDrvStren (CKE Drive Strength) + * 00 = 1.0x + * 01 = 1.25x + * 10 = 1.5x (Default) + * 11 = 2.0x + * [ 3: 2] reserved + * [ 5: 4] CsOdtDrvStren (CS/ODT Drive Strength) + * 00 = 1.0x + * 01 = 1.25x + * 10 = 1.5x (Default) + * 11 = 2.0x + * [ 7: 6] reserved + * [ 9: 8] AddrCmdDrvStren (Address/Command Drive Strength) + * 00 = 1.0x + * 01 = 1.25x + * 10 = 1.5x (Default) + * 11 = 2.0x + * [11:10] reserved + * [13:12] ClkDrvStren (MEMCLK Drive Strength) + * 00 = 0.75x + * 01 = 1.0x Default) + * 10 = 1.25x + * 11 = 1.5x + * [15:14] reserved + * [17:16] DataDrvStren (Data Drive Strength) + * 00 = 0.75x + * 01 = 1.0x Default) + * 10 = 1.25x + * 11 = 1.5x + * [19:18] reserved + * [21:20] DqsDrvStren (DQS Drive Strength) + * 00 = 0.75x + * 01 = 1.0x Default) + * 10 = 1.25x + * 11 = 1.5x + * [27:22] reserved + * [29:28] ProcOdt ( Processor On-die Termination) + * 00 = 300 ohms +/- 20% + * 01 = 150 ohms +/- 20% + * 10 = 75 ohms +/- 20% + * 11 = reserved + * [31:30] reserved + */ + 0x00, 0xcfcccccc, 0x00000000, + 0x20, 0xcfcccccc, 0x00000000, + /* Write Data Timing Low Control Register + * Index 0x01 + * [ 5: 0] WrDatTimeByte0 (Write Data Byte 0 Timing Control) + * 000000 = no delay + * 000001 = 1/96 MEMCLK delay + * 000010 = 2/96 MEMCLK delay + * ... + * 101111 = 47/96 MEMCLK delay + * 11xxxx = reserved + * [ 7: 6] reserved + * [13: 8] WrDatTimeByte1 (Write Data Byte 1 Timing Control) + * [15:14] reserved + * [21:16] WrDatTimeByte2 (Write Data Byte 2 Timing Control) + * [23:22] reserved + * [29:24] WrDatTimeByte3 (Write Data Byte 3 Timing Control) + * [31:30] reserved + */ + 0x01, 0xc0c0c0c0, 0x00000000, + 0x21, 0xc0c0c0c0, 0x00000000, + /* Write Data Timing High Control Register + * Index 0x02 + * [ 5: 0] WrDatTimeByte4 (Write Data Byte 4 Timing Control) + * [ 7: 6] reserved + * [13: 8] WrDatTimeByte5 (Write Data Byte 5 Timing Control) + * [15:14] reserved + * [21:16] WrDatTimeByte6 (Write Data Byte 6 Timing Control) + * [23:22] reserved + * [29:24] WrDatTimeByte7 (Write Data Byte 7 Timing Control) + * [31:30] reserved + */ + 0x02, 0xc0c0c0c0, 0x00000000, + 0x22, 0xc0c0c0c0, 0x00000000, + + /* Write Data ECC Timing Control Register + * Index 0x03 + * [ 5: 0] WrChkTime (Write Data ECC Timing Control) + * 000000 = no delay + * 000001 = 1/96 MEMCLK delay + * 000010 = 2/96 MEMCLK delay + * ... + * 101111 = 47/96 MEMCLK delay + * 11xxxx = reserved + * [31: 6] reserved + */ + 0x03, 0x000000c0, 0x00000000, + 0x23, 0x000000c0, 0x00000000, + + /* Address Timing Control Register + * Index 0x04 + * [ 4: 0] CkeFineDelay (CKE Fine Delay) + * 00000 = no delay + * 00001 = 1/64 MEMCLK delay + * 00010 = 2/64 MEMCLK delay + * ... + * 11111 = 31/64 MEMCLK delay + * [ 5: 5] CkeSetup (CKE Setup Time) + * 0 = 1/2 MEMCLK + * 1 = 1 MEMCLK + * [ 7: 6] reserved + * [12: 8] CsOdtFineDelay (CS/ODT Fine Delay) + * 00000 = no delay + * 00001 = 1/64 MEMCLK delay + * 00010 = 2/64 MEMCLK delay + * ... + * 11111 = 31/64 MEMCLK delay + * [13:13] CsOdtSetup (CS/ODT Setup Time) + * 0 = 1/2 MEMCLK + * 1 = 1 MEMCLK + * [15:14] reserved + * [20:16] AddrCmdFineDelay (Address/Command Fine Delay) + * 00000 = no delay + * 00001 = 1/64 MEMCLK delay + * 00010 = 2/64 MEMCLK delay + * ... + * 11111 = 31/64 MEMCLK delay + * [21:21] AddrCmdSetup (Address/Command Setup Time) + * 0 = 1/2 MEMCLK + * 1 = 1 MEMCLK + * [31:22] reserved + */ + 0x04, 0xffc0c0c0, 0x00000000, + 0x24, 0xffc0c0c0, 0x00000000, + + /* Read DQS Timing Low Control Register + * Index 0x05 + * [ 5: 0] RdDqsTimeByte0 (Read DQS Byte 0 Timing Control) + * 000000 = no delay + * 000001 = 1/96 MEMCLK delay + * 000010 = 2/96 MEMCLK delay + * ... + * 101111 = 47/96 MEMCLK delay + * 11xxxx = reserved + * [ 7: 6] reserved + * [13: 8] RdDqsTimeByte1 (Read DQS Byte 1 Timing Control) + * [15:14] reserved + * [21:16] RdDqsTimeByte2 (Read DQS Byte 2 Timing Control) + * [23:22] reserved + * [29:24] RdDqsTimeByte3 (Read DQS Byte 3 Timing Control) + * [31:30] reserved + */ + 0x05, 0xc0c0c0c0, 0x00000000, + 0x25, 0xc0c0c0c0, 0x00000000, + + /* Read DQS Timing High Control Register + * Index 0x06 + * [ 5: 0] RdDqsTimeByte4 (Read DQS Byte 4 Timing Control) + * [ 7: 6] reserved + * [13: 8] RdDqsTimeByte5 (Read DQS Byte 5 Timing Control) + * [15:14] reserved + * [21:16] RdDqsTimeByte6 (Read DQS Byte 6 Timing Control) + * [23:22] reserved + * [29:24] RdDqsTimeByte7 (Read DQS Byte 7 Timing Control) + * [31:30] reserved + */ + 0x06, 0xc0c0c0c0, 0x00000000, + 0x26, 0xc0c0c0c0, 0x00000000, + + /* Read DQS ECC Timing Control Register + * Index 0x07 + * [ 5: 0] RdDqsTimeCheck (Read DQS ECC Timing Control) + * 000000 = no delay + * 000001 = 1/96 MEMCLK delay + * 000010 = 2/96 MEMCLK delay + * ... + * 101111 = 47/96 MEMCLK delay + * 11xxxx = reserved + * [31: 6] reserved + */ + 0x07, 0x000000c0, 0x00000000, + 0x27, 0x000000c0, 0x00000000, + + /* DQS Receiver Enable Timing Control Register + * Index 0x10, 0x13, 0x16, 0x19, + * [ 7: 0] Dqs RcvEnDelay (DQS Receiver Enable Delay) + * 0x00 = 0 ps + * 0x01 = 50 ps + * 0x02 = 100 ps + * ... + * 0xae = 8.7 ns + * 0xaf-0xff = reserved + * [31: 6] reserved + */ + 0x10, 0x000000ff, 0x00000000, + 0x13, 0x000000ff, 0x00000000, + 0x16, 0x000000ff, 0x00000000, + 0x19, 0x000000ff, 0x00000000, + 0x30, 0x000000ff, 0x00000000, + 0x33, 0x000000ff, 0x00000000, + 0x36, 0x000000ff, 0x00000000, + 0x39, 0x000000ff, 0x00000000, + }; +#endif + + int i; + int max; + +#if 1 + if (!controller_present(ctrl)) { +// print_debug("No memory controller present\r\n"); + sysinfo->ctrl_present[ctrl->node_id] = 0; + return; + } +#endif + sysinfo->ctrl_present[ctrl->node_id] = 1; + + print_spew("setting up CPU"); + print_spew_hex8(ctrl->node_id); + print_spew(" northbridge registers\r\n"); + max = sizeof(register_values)/sizeof(register_values[0]); + for(i = 0; i < max; i += 3) { + device_t dev; + unsigned where; + unsigned long reg; + dev = (register_values[i] & ~0xff) - PCI_DEV(0, 0x18, 0) + ctrl->f0; + where = register_values[i] & 0xff; + reg = pci_read_config32(dev, where); + reg &= register_values[i+1]; + reg |= register_values[i+2]; + pci_write_config32(dev, where, reg); + } + +#if 0 + // for index regs + max = sizeof(index_register_values)/sizeof(index_register_values[0]); + for(i = 0; i < max; i += 3) { + unsigned long reg; + unsigned index; + index = register_values[i]; + reg = pci_read_config32_index_wait(ctrl->f2, DRAM_CTRL_ADDI_DATA_OFFSET, index); + reg &= register_values[i+1]; + reg |= register_values[i+2]; + pci_write_config32_index_wait(ctrl->f2, DRAM_CTRL_ADDI_DATA_OFFSET, index, reg); + } +#endif + + print_spew("done.\r\n"); +} + +static int is_dual_channel(const struct mem_controller *ctrl) +{ + uint32_t dcl; + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + return dcl & DCL_Width128; +} + +static int is_registered(const struct mem_controller *ctrl) +{ + /* Test to see if we are dealing with registered SDRAM. + * If we are not registered we are unbuffered. + * This function must be called after spd_handle_unbuffered_dimms. + */ + uint32_t dcl; + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + return !(dcl & DCL_UnBuffDimm); +} + +static void spd_get_dimm_size(unsigned device, struct dimm_size *sz) +{ + /* Calculate the log base 2 size of a DIMM in bits */ + int value; + sz->per_rank = 0; + sz->rows = 0; + sz->col = 0; + sz->rank = 0; + + value = spd_read_byte(device, SPD_ROW_NUM); /* rows */ + if (value < 0) goto hw_err; + if ((value & 0xff) == 0) goto val_err; // max is 16 ? + sz->per_rank += value & 0xff; + sz->rows = value & 0xff; + + value = spd_read_byte(device, SPD_COL_NUM); /* columns */ + if (value < 0) goto hw_err; + if ((value & 0xff) == 0) goto val_err; //max is 11 + sz->per_rank += value & 0xff; + sz->col = value & 0xff; + + value = spd_read_byte(device, SPD_BANK_NUM); /* banks */ + if (value < 0) goto hw_err; + if ((value & 0xff) == 0) goto val_err; + sz->bank = log2(value & 0xff); // convert 4 to 2, and 8 to 3 + sz->per_rank += sz->bank; + + /* Get the module data width and convert it to a power of two */ + value = spd_read_byte(device, SPD_DATA_WIDTH); + if (value < 0) goto hw_err; + value &= 0xff; + if ((value != 72) && (value != 64)) goto val_err; + sz->per_rank += log2(value) - 3; //64 bit So another 3 lines + + /* How many ranks? */ + value = spd_read_byte(device, SPD_MOD_ATTRIB_RANK); /* number of physical banks */ + if (value < 0) goto hw_err; +// value >>= SPD_MOD_ATTRIB_RANK_NUM_SHIFT; + value &= SPD_MOD_ATTRIB_RANK_NUM_MASK; + value += SPD_MOD_ATTRIB_RANK_NUM_BASE; // 0-->1, 1-->2, 3-->4 + /* + rank == 1 only one rank or say one side + rank == 2 two side , and two ranks + rank == 4 two side , and four ranks total + Some one side two ranks, because of stacked + */ + if ((value != 1) && (value != 2) && (value != 4 )) { + goto val_err; + } + sz->rank = value; + + /* verify if per_rank is equal byte 31 + it has the DIMM size as a multiple of 128MB. + */ + value = spd_read_byte(device, SPD_RANK_SIZE); + if (value < 0) goto hw_err; + value &= 0xff; + value = log2(value); + if(value <=4 ) value += 8; // add back to 1G to high + value += (27-5); // make 128MB to the real lines + if( value != (sz->per_rank)) { + print_err("Bad RANK Size --\r\n"); + goto val_err; + } + + goto out; + + val_err: + die("Bad SPD value\r\n"); + /* If an hw_error occurs report that I have no memory */ +hw_err: + sz->per_rank = 0; + sz->rows = 0; + sz->col = 0; + sz->bank = 0; + sz->rank = 0; + out: + return; +} + +static void set_dimm_size(const struct mem_controller *ctrl, struct dimm_size *sz, unsigned index, int is_Width128) +{ + uint32_t base0, base1; + + + /* For each base register. + * Place the dimm size in 32 MB quantities in the bits 31 - 21. + * The initialize dimm size is in bits. + * Set the base enable bit0. + */ + + base0 = base1 = 0; + + /* Make certain side1 of the dimm is at least 128MB */ + if (sz->per_rank >= 27) { + base0 = (1 << ((sz->per_rank - 27 ) + 19)) | 1; + } + + /* Make certain side2 of the dimm is at least 128MB */ + if (sz->rank > 1) { // 2 ranks or 4 ranks + base1 = (1 << ((sz->per_rank - 27 ) + 19)) | 1; + } + + /* Double the size if we are using dual channel memory */ + if (is_Width128) { + base0 = (base0 << 1) | (base0 & 1); + base1 = (base1 << 1) | (base1 & 1); + } + + /* Clear the reserved bits */ + base0 &= ~0xe007fffe; + base1 &= ~0xe007fffe; + + /* Set the appropriate DIMM base address register */ + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+0)<<2), base0); + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+1)<<2), base1); +#if QRANK_DIMM_SUPPORT == 1 + if(sz->rank == 4) { + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+4)<<2), base0); + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+5)<<2), base1); + } +#endif + + /* Enable the memory clocks for this DIMM by Clear the MemClkDis bit*/ + if (base0) { + uint32_t dword; + uint32_t ClkDis0; +#if CPU_SOCKET_TYPE == 0x10 /* L1 */ + ClkDis0 = DTL_MemClkDis0; +#else + #if CPU_SOCKET_TYPE == 0x11 /* AM2 */ + ClkDis0 = DTL_MemClkDis0_AM2; + #endif +#endif + + dword = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); //Channel A + dword &= ~(ClkDis0 >> index); +#if QRANK_DIMM_SUPPORT == 1 + if(sz->rank == 4) { + dword &= ~(ClkDis0 >> (index+2)); + } +#endif + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dword); + + if (is_Width128) { //Channel B + dword = pci_read_config32(ctrl->f2, DRAM_CTRL_MISC); + dword &= ~(ClkDis0 >> index); +#if QRANK_DIMM_SUPPORT == 1 + if(sz->rank == 4) { + dword &= ~(ClkDis0 >> (index+2)); + } +#endif + pci_write_config32(ctrl->f2, DRAM_CTRL_MISC, dword); + } + + } +} + +/* row col bank for 64 bit + 0: 13 9 2 :128M + 1: 13 10 2 :256M + 2: 14 10 2 :512M + 3: 13 11 2 :512M + 4: 13 10 3 :512M + 5: 14 10 3 :1G + 6: 14 11 2 :1G + 7: 15 10 3 :2G + 8: 14 11 3 :2G + 9: 15 11 3 :4G + 10: 16 10 3 :4G + 11: 16 11 3 :8G +*/ + +static void set_dimm_cs_map(const struct mem_controller *ctrl, struct dimm_size *sz, unsigned index) +{ + static const uint8_t cs_map_aaa[24] = { + /* (bank=2, row=13, col=9)(3, 16, 11) ---> (0, 0, 0) (1, 3, 2) */ + //Bank2 + 0, 1, 3, + 0, 2, 6, + 0, 0, 0, + 0, 0, 0, + //Bank3 + 0, 4, 0, + 0, 5, 8, + 0, 7, 9, + 0,10,11, + }; + + uint32_t map; + + map = pci_read_config32(ctrl->f2, DRAM_BANK_ADDR_MAP); + map &= ~(0xf << (index * 4)); +#if QRANK_DIMM_SUPPORT == 1 + if(sz->rank == 4) { + map &= ~(0xf << ( (index + 2) * 4)); + } +#endif + + /* Make certain side1 of the dimm is at least 128MB */ + if (sz->per_rank >= 27) { + unsigned temp_map; + temp_map = cs_map_aaa[(sz->bank-2)*3*4 + (sz->rows - 13)*3 + (sz->col - 9) ]; + map |= temp_map << (index*4); +#if QRANK_DIMM_SUPPORT == 1 + if(sz->rank == 4) { + map |= temp_map << ( (index + 2) * 4); + } +#endif + } + + pci_write_config32(ctrl->f2, DRAM_BANK_ADDR_MAP, map); + +} + +static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask, struct mem_info *meminfo) +{ + int i; + + for(i = 0; i < DIMM_SOCKETS; i++) { + struct dimm_size *sz = &(meminfo->sz[i]); + if (!(dimm_mask & (1 << i))) { + continue; + } + spd_get_dimm_size(ctrl->channel0[i], sz); + if (sz->per_rank == 0) { + return -1; /* Report SPD error */ + } + set_dimm_size(ctrl, sz, i, meminfo->is_Width128); + set_dimm_cs_map (ctrl, sz, i); + } + return dimm_mask; +} + +static void route_dram_accesses(const struct mem_controller *ctrl, + unsigned long base_k, unsigned long limit_k) +{ + /* Route the addresses to the controller node */ + unsigned node_id; + unsigned limit; + unsigned base; + unsigned index; + unsigned limit_reg, base_reg; + device_t device; + + node_id = ctrl->node_id; + index = (node_id << 3); + limit = (limit_k << 2); + limit &= 0xffff0000; + limit -= 0x00010000; + limit |= ( 0 << 8) | (node_id << 0); + base = (base_k << 2); + base &= 0xffff0000; + base |= (0 << 8) | (1<<1) | (1<<0); + + limit_reg = 0x44 + index; + base_reg = 0x40 + index; + for(device = PCI_DEV(0, 0x18, 1); device <= PCI_DEV(0, 0x1f, 1); device += PCI_DEV(0, 1, 0)) { + pci_write_config32(device, limit_reg, limit); + pci_write_config32(device, base_reg, base); + } +} + +static void set_top_mem(unsigned tom_k, unsigned hole_startk) +{ + /* Error if I don't have memory */ + if (!tom_k) { + die("No memory?"); + } + + /* Report the amount of memory. */ + print_debug("RAM: 0x"); + print_debug_hex32(tom_k); + print_debug(" KB\r\n"); + + msr_t msr; + if(tom_k > (4*1024*1024)) { + /* Now set top of memory */ + msr.lo = (tom_k & 0x003fffff) << 10; + msr.hi = (tom_k & 0xffc00000) >> 22; + wrmsr(TOP_MEM2, msr); + } + + /* Leave a 64M hole between TOP_MEM and TOP_MEM2 + * so I can see my rom chip and other I/O devices. + */ + if (tom_k >= 0x003f0000) { +#if HW_MEM_HOLE_SIZEK != 0 + if(hole_startk != 0) { + tom_k = hole_startk; + } else +#endif + tom_k = 0x3f0000; + } + msr.lo = (tom_k & 0x003fffff) << 10; + msr.hi = (tom_k & 0xffc00000) >> 22; + wrmsr(TOP_MEM, msr); +} + +static unsigned long interleave_chip_selects(const struct mem_controller *ctrl, int is_Width128) +{ + /* 35 - 27 */ + + static const uint8_t csbase_low_f0_shift[] = { + /* 128MB */ (14 - (13-5)), + /* 256MB */ (15 - (13-5)), + /* 512MB */ (15 - (13-5)), + /* 512MB */ (16 - (13-5)), + /* 512MB */ (16 - (13-5)), + /* 1GB */ (16 - (13-5)), + /* 1GB */ (16 - (13-5)), + /* 2GB */ (16 - (13-5)), + /* 2GB */ (17 - (13-5)), + /* 4GB */ (17 - (13-5)), + /* 4GB */ (16 - (13-5)), + /* 8GB */ (17 - (13-5)), + }; + + /* cs_base_high is not changed */ + + uint32_t csbase_inc; + int chip_selects, index; + int bits; + unsigned common_size; + unsigned common_cs_mode; + uint32_t csbase, csmask; + + /* See if all of the memory chip selects are the same size + * and if so count them. + */ + chip_selects = 0; + common_size = 0; + common_cs_mode = 0xff; + for(index = 0; index < 8; index++) { + unsigned size; + unsigned cs_mode; + uint32_t value; + + value = pci_read_config32(ctrl->f2, DRAM_CSBASE + (index << 2)); + + /* Is it enabled? */ + if (!(value & 1)) { + continue; + } + chip_selects++; + size = (value >> 19) & 0x3ff; + if (common_size == 0) { + common_size = size; + } + /* The size differed fail */ + if (common_size != size) { + return 0; + } + + value = pci_read_config32(ctrl->f2, DRAM_BANK_ADDR_MAP); + cs_mode =( value >> ((index>>1)*4)) & 0xf; + if(common_cs_mode == 0xff) { + common_cs_mode = cs_mode; + } + /* The cs_mode differed fail */ + if(common_cs_mode != cs_mode) { + return 0; + } + } + + /* Chip selects can only be interleaved when there is + * more than one and their is a power of two of them. + */ + bits = log2(chip_selects); + if (((1 << bits) != chip_selects) || (bits < 1) || (bits > 3)) { //chip_selects max = 8 + return 0; + } + + /* Find the bits of csbase that we need to interleave on */ + csbase_inc = 1 << (csbase_low_f0_shift[common_cs_mode]); + if(is_Width128) { + csbase_inc <<=1; + } + + + /* Compute the initial values for csbase and csbask. + * In csbase just set the enable bit and the base to zero. + * In csmask set the mask bits for the size and page level interleave. + */ + csbase = 0 | 1; + csmask = (((common_size << bits) - 1) << 19); + csmask |= 0x3fe0 & ~((csbase_inc << bits) - csbase_inc); + for(index = 0; index < 8; index++) { + uint32_t value; + + value = pci_read_config32(ctrl->f2, DRAM_CSBASE + (index << 2)); + /* Is it enabled? */ + if (!(value & 1)) { + continue; + } + pci_write_config32(ctrl->f2, DRAM_CSBASE + (index << 2), csbase); + if((index & 1) == 0) { //only have 4 CSMASK + pci_write_config32(ctrl->f2, DRAM_CSMASK + ((index>>1) << 2), csmask); + } + csbase += csbase_inc; + } + + print_debug("Interleaved\r\n"); + + /* Return the memory size in K */ + return common_size << ((27-10) + bits); +} +static unsigned long order_chip_selects(const struct mem_controller *ctrl) +{ + unsigned long tom; + + /* Remember which registers we have used in the high 8 bits of tom */ + tom = 0; + for(;;) { + /* Find the largest remaining canidate */ + unsigned index, canidate; + uint32_t csbase, csmask; + unsigned size; + csbase = 0; + canidate = 0; + for(index = 0; index < 8; index++) { + uint32_t value; + value = pci_read_config32(ctrl->f2, DRAM_CSBASE + (index << 2)); + + /* Is it enabled? */ + if (!(value & 1)) { + continue; + } + + /* Is it greater? */ + if (value <= csbase) { + continue; + } + + /* Has it already been selected */ + if (tom & (1 << (index + 24))) { + continue; + } + /* I have a new canidate */ + csbase = value; + canidate = index; + } + /* See if I have found a new canidate */ + if (csbase == 0) { + break; + } + + /* Remember the dimm size */ + size = csbase >> 19; + + /* Remember I have used this register */ + tom |= (1 << (canidate + 24)); + + /* Recompute the cs base register value */ + csbase = (tom << 19) | 1; + + /* Increment the top of memory */ + tom += size; + + /* Compute the memory mask */ + csmask = ((size -1) << 19); + csmask |= 0x3fe0; /* For now don't optimize */ + + /* Write the new base register */ + pci_write_config32(ctrl->f2, DRAM_CSBASE + (canidate << 2), csbase); + /* Write the new mask register */ + if((canidate & 1) == 0) { //only have 4 CSMASK + pci_write_config32(ctrl->f2, DRAM_CSMASK + ((canidate>>1) << 2), csmask); + } + + } + /* Return the memory size in K */ + return (tom & ~0xff000000) << (27-10); +} + +unsigned long memory_end_k(const struct mem_controller *ctrl, int max_node_id) +{ + unsigned node_id; + unsigned end_k; + /* Find the last memory address used */ + end_k = 0; + for(node_id = 0; node_id < max_node_id; node_id++) { + uint32_t limit, base; + unsigned index; + index = node_id << 3; + base = pci_read_config32(ctrl->f1, 0x40 + index); + /* Only look at the limit if the base is enabled */ + if ((base & 3) == 3) { + limit = pci_read_config32(ctrl->f1, 0x44 + index); + end_k = ((limit + 0x00010000) & 0xffff0000) >> 2; + } + } + return end_k; +} + +static void order_dimms(const struct mem_controller *ctrl, struct mem_info *meminfo) +{ + unsigned long tom_k, base_k; + + if (read_option(CMOS_VSTART_interleave_chip_selects, CMOS_VLEN_interleave_chip_selects, 1) != 0) { + tom_k = interleave_chip_selects(ctrl, meminfo->is_Width128); + } else { + print_debug("Interleaving disabled\r\n"); + tom_k = 0; + } + if (!tom_k) { + tom_k = order_chip_selects(ctrl); + } + /* Compute the memory base address */ + base_k = memory_end_k(ctrl, ctrl->node_id); + tom_k += base_k; + route_dram_accesses(ctrl, base_k, tom_k); + set_top_mem(tom_k, 0); +} + +static long disable_dimm(const struct mem_controller *ctrl, unsigned index, long dimm_mask, struct mem_info *meminfo) +{ + print_debug("disabling dimm"); + print_debug_hex8(index); + print_debug("\r\n"); + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+0)<<2), 0); + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+1)<<2), 0); +#if QRANK_DIMM_SUPPORT == 1 + if(meminfo->sz[index].rank == 4) { + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+4)<<2), 0); + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+5)<<2), 0); + } +#endif + + dimm_mask &= ~(1 << index); + return dimm_mask; +} + +static long spd_handle_unbuffered_dimms(const struct mem_controller *ctrl, long dimm_mask, struct mem_info *meminfo) +{ + int i; + uint32_t registered; + uint32_t dcl; + registered = 0; + for(i = 0; (i < DIMM_SOCKETS); i++) { + int value; + if (!(dimm_mask & (1 << i))) { + continue; + } + value = spd_read_byte(ctrl->channel0[i], SPD_DIMM_TYPE); + if (value < 0) { + return -1; + } + /* Registered dimm ? */ + value &= 0x3f; + if ((value == SPD_DIMM_TYPE_RDIMM) || (value == SPD_DIMM_TYPE_mRDIMM)) { + //check SPD_MOD_ATTRIB to verify it is SPD_MOD_ATTRIB_REGADC (0x11)? + registered |= (1<<i); + } + } + + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dcl &= ~DCL_UnBuffDimm; + meminfo->is_registered = 1; + if (!registered) { + dcl |= DCL_UnBuffDimm; + meminfo->is_registered = 0; + } + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); + +#if 1 + if (meminfo->is_registered) { + print_debug("Registered\r\n"); + } else { + print_debug("Unbuffered\r\n"); + } +#endif + return dimm_mask; +} + +static unsigned int spd_detect_dimms(const struct mem_controller *ctrl) +{ + unsigned dimm_mask; + int i; + dimm_mask = 0; + for(i = 0; i < DIMM_SOCKETS; i++) { + int byte; + unsigned device; + device = ctrl->channel0[i]; + if (device) { + byte = spd_read_byte(ctrl->channel0[i], SPD_MEM_TYPE); /* Type */ + if (byte == SPD_MEM_TYPE_SDRAM_DDR2) { + dimm_mask |= (1 << i); + } + } + device = ctrl->channel1[i]; + if (device) { + byte = spd_read_byte(ctrl->channel1[i], SPD_MEM_TYPE); + if (byte == SPD_MEM_TYPE_SDRAM_DDR2) { + dimm_mask |= (1 << (i + DIMM_SOCKETS)); + } + } + } + return dimm_mask; +} + +static long spd_enable_2channels(const struct mem_controller *ctrl, long dimm_mask, struct mem_info *meminfo) +{ + int i; + uint32_t nbcap; + /* SPD addresses to verify are identical */ + static const uint8_t addresses[] = { + 2, /* Type should be DDR2 SDRAM */ + 3, /* *Row addresses */ + 4, /* *Column addresses */ + 5, /* *Number of DIMM Ranks */ + 6, /* *Module Data Width*/ + 9, /* *Cycle time at highest CAS Latency CL=X */ + 11, /* *DIMM Conf Type */ + 13, /* *Pri SDRAM Width */ + 17, /* *Logical Banks */ + 18, /* *Supported CAS Latencies */ + 20, /* *DIMM Type Info */ + 21, /* *SDRAM Module Attributes */ + 23, /* *Cycle time at CAS Latnecy (CLX - 1) */ + 26, /* *Cycle time at CAS Latnecy (CLX - 2) */ + 27, /* *tRP Row precharge time */ + 28, /* *Minimum Row Active to Row Active Delay (tRRD) */ + 29, /* *tRCD RAS to CAS */ + 30, /* *tRAS Activate to Precharge */ + 36, /* *Write recovery time (tWR) */ + 37, /* *Internal write to read command delay (tRDP) */ + 38, /* *Internal read to precharge commanfd delay (tRTP) */ + 41, /* *Extension of Byte 41 tRC and Byte 42 tRFC */ + 41, /* *Minimum Active to Active/Auto Refresh Time(Trc) */ + 42, /* *Minimum Auto Refresh Command Time(Trfc) */ + }; + /* If the dimms are not in pairs do not do dual channels */ + if ((dimm_mask & ((1 << DIMM_SOCKETS) - 1)) != + ((dimm_mask >> DIMM_SOCKETS) & ((1 << DIMM_SOCKETS) - 1))) { + goto single_channel; + } + /* If the cpu is not capable of doing dual channels don't do dual channels */ + nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP); + if (!(nbcap & NBCAP_128Bit)) { + goto single_channel; + } + for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) { + unsigned device0, device1; + int value0, value1; + int j; + /* If I don't have a dimm skip this one */ + if (!(dimm_mask & (1 << i))) { + continue; + } + device0 = ctrl->channel0[i]; + device1 = ctrl->channel1[i]; + for(j = 0; j < sizeof(addresses)/sizeof(addresses[0]); j++) { + unsigned addr; + addr = addresses[j]; + value0 = spd_read_byte(device0, addr); + if (value0 < 0) { + return -1; + } + value1 = spd_read_byte(device1, addr); + if (value1 < 0) { + return -1; + } + if (value0 != value1) { + goto single_channel; + } + } + } + print_spew("Enabling dual channel memory\r\n"); + uint32_t dcl; + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dcl &= ~DCL_BurstLength32; /* 32byte mode may be preferred in platforms that include graphics controllers that generate a lot of 32-bytes system memory accesses + 32byte mode is not supported when the DRAM interface is 128 bits wides, even 32byte mode is set, system still use 64 byte mode */ + dcl |= DCL_Width128; + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); + meminfo->is_Width128 = 1; + return dimm_mask; + single_channel: + dimm_mask &= ~((1 << (DIMM_SOCKETS *2)) - (1 << DIMM_SOCKETS)); + meminfo->is_Width128 = 0; + return dimm_mask; +} + +struct mem_param { + uint16_t cycle_time; + uint8_t divisor; /* In 1/40 ns increments */ + uint8_t TrwtTO; + uint8_t Twrrd; + uint8_t Twrwr; + uint8_t Trdrd; + uint8_t DcqByPassMax; + uint32_t dch_memclk; + char name[9]; +}; + + static const struct mem_param speed[] = { + { + .name = "200Mhz\r\n", + .cycle_time = 0x500, + .divisor = 200, // how many 1/40ns per clock + .dch_memclk = DCH_MemClkFreq_200MHz, //0 + .TrwtTO = 7, + .Twrrd = 2, + .Twrwr = 2, + .Trdrd = 3, + .DcqByPassMax = 4, + + }, + { + .name = "266Mhz\r\n", + .cycle_time = 0x375, + .divisor = 150, //???? + .dch_memclk = DCH_MemClkFreq_266MHz, //1 + .TrwtTO = 7, + .Twrrd = 2, + .Twrwr = 2, + .Trdrd = 3, + .DcqByPassMax = 4, + }, + { + .name = "333Mhz\r\n", + .cycle_time = 0x300, + .divisor = 120, + .dch_memclk = DCH_MemClkFreq_333MHz, //2 + .TrwtTO = 7, + .Twrrd = 2, + .Twrwr = 2, + .Trdrd = 3, + .DcqByPassMax = 4, + + }, + { + .name = "400Mhz\r\n", + .cycle_time = 0x250, + .divisor = 100, + .dch_memclk = DCH_MemClkFreq_400MHz,//3 + .TrwtTO = 7, + .Twrrd = 2, + .Twrwr = 2, + .Trdrd = 3, + .DcqByPassMax = 4, + }, + { + .cycle_time = 0x000, + }, + }; + +static const struct mem_param *get_mem_param(unsigned min_cycle_time) +{ + + const struct mem_param *param; + for(param = &speed[0]; param->cycle_time ; param++) { + if (min_cycle_time > (param+1)->cycle_time) { + break; + } + } + if (!param->cycle_time) { + die("min_cycle_time to low"); + } + print_spew(param->name); +#ifdef DRAM_MIN_CYCLE_TIME + print_debug(param->name); +#endif + return param; +} + +static uint8_t get_exact_divisor(int i, uint8_t divisor) +{ + //input divisor could be 200(200), 150(266), 120(333), 100 (400) + static const uint8_t dv_a[] = { + /* 200 266 333 400 */ + /*4 */ 250, 250, 250, 250, + /*5 */ 200, 200, 200, 100, + /*6 */ 200, 166, 166, 100, + /*7 */ 200, 171, 142, 100, + + /*8 */ 200, 150, 125, 100, + /*9 */ 200, 156, 133, 100, + /*10*/ 200, 160, 120, 100, + /*11*/ 200, 163, 127, 100, + + /*12*/ 200, 150, 133, 100, + /*13*/ 200, 153, 123, 100, + /*14*/ 200, 157, 128, 100, + /*15*/ 200, 160, 120, 100, + }; + + unsigned fid_cur; + int index; + + msr_t msr; + msr = rdmsr(0xc0010042); + fid_cur = msr.lo & 0x3f; + + index = fid_cur>>1; + + if(index>12) return divisor; + + if(i>3) return divisor; + + return dv_a[index * 4+i]; + +} + +struct spd_set_memclk_result { + const struct mem_param *param; + long dimm_mask; +}; + +static unsigned convert_to_linear(unsigned value) +{ + static const unsigned fraction[] = { 0x25, 0x33, 0x66, 0x75 }; + unsigned valuex; + + /* We need to convert value to more readable */ + if((value & 0xf) < 10) { //no .25, .33, .66, .75 + value <<= 4; + } else { + valuex = ((value & 0xf0) << 4) | fraction [(value & 0xf)-10]; + value = valuex; + } + return value; +} + +static struct spd_set_memclk_result spd_set_memclk(const struct mem_controller *ctrl, long dimm_mask, struct mem_info *meminfo) +{ + /* Compute the minimum cycle time for these dimms */ + struct spd_set_memclk_result result; + unsigned min_cycle_time, min_latency, bios_cycle_time; + int i; + uint32_t value; + + static const uint8_t latency_indicies[] = { 25, 23, 9 }; + + static const uint16_t min_cycle_times[] = { // use full speed to compare + [NBCAP_MEMCLK_NOLIMIT] = 0x250, /*2.5ns */ + [NBCAP_MEMCLK_333MHZ] = 0x300, /* 3.0ns */ + [NBCAP_MEMCLK_266MHZ] = 0x375, /* 3.75ns */ + [NBCAP_MEMCLK_200MHZ] = 0x500, /* 5.0s */ + }; + + + value = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP); + min_cycle_time = min_cycle_times[(value >> NBCAP_MEMCLK_SHIFT) & NBCAP_MEMCLK_MASK]; + bios_cycle_time = min_cycle_times[ + read_option(CMOS_VSTART_max_mem_clock, CMOS_VLEN_max_mem_clock, 0)]; + if (bios_cycle_time > min_cycle_time) { + min_cycle_time = bios_cycle_time; + } + min_latency = 3; + + print_tx("1 min_cycle_time:", min_cycle_time); + + /* Compute the least latency with the fastest clock supported + * by both the memory controller and the dimms. + */ + for(i = 0; i < DIMM_SOCKETS; i++) { + int new_cycle_time, new_latency; + int index; + int latencies; + int latency; + + if (!(dimm_mask & (1 << i))) { + continue; + } + + /* First find the supported CAS latencies + * Byte 18 for DDR SDRAM is interpreted: + * bit 3 == CAS Latency = 3 + * bit 4 == CAS Latency = 4 + * bit 5 == CAS Latency = 5 + * bit 6 == CAS Latency = 6 + */ + new_cycle_time = 0x500; + new_latency = 6; + + latencies = spd_read_byte(ctrl->channel0[i], SPD_CAS_LAT); + if (latencies <= 0) continue; + + print_tx("i:",i); + print_tx("\tlatencies:", latencies); + /* Compute the lowest cas latency supported */ + latency = log2(latencies) - 2; + + /* Loop through and find a fast clock with a low latency */ + for(index = 0; index < 3; index++, latency++) { + int value; + if ((latency < 3) || (latency > 6) || + (!(latencies & (1 << latency)))) { + continue; + } + value = spd_read_byte(ctrl->channel0[i], latency_indicies[index]); + if (value < 0) { + goto hw_error; + } + print_tx("\tindex:", index); + print_tx("\t\tlatency:", latency); + print_tx("\t\tvalue1:", value); + + value = convert_to_linear(value); + + print_tx("\t\tvalue2:", value); + + /* Only increase the latency if we decreas the clock */ + if (value >= min_cycle_time ) { + if(value < new_cycle_time) { + new_cycle_time = value; + new_latency = latency; + } else if (value == new_cycle_time) { + if(new_latency > latency) { + new_latency = latency; + } + } + } + print_tx("\t\tnew_cycle_time:", new_cycle_time); + print_tx("\t\tnew_latency:", new_latency); + + } + if (new_latency > 6){ + continue; + } + /* Does min_latency need to be increased? */ + if (new_cycle_time > min_cycle_time) { + min_cycle_time = new_cycle_time; + } + /* Does min_cycle_time need to be increased? */ + if (new_latency > min_latency) { + min_latency = new_latency; + } + + print_tx("2 min_cycle_time:", min_cycle_time); + print_tx("2 min_latency:", min_latency); + } + /* Make a second pass through the dimms and disable + * any that cannot support the selected memclk and cas latency. + */ + + print_tx("3 min_cycle_time:", min_cycle_time); + print_tx("3 min_latency:", min_latency); + + for(i = 0; (i < DIMM_SOCKETS) && (ctrl->channel0[i]); i++) { + int latencies; + int latency; + int index; + int value; + if (!(dimm_mask & (1 << i))) { + continue; + } + latencies = spd_read_byte(ctrl->channel0[i], SPD_CAS_LAT); + if (latencies < 0) goto hw_error; + if (latencies == 0) { + continue; +// goto dimm_err; + } + + /* Compute the lowest cas latency supported */ + latency = log2(latencies) -2; + + /* Walk through searching for the selected latency */ + for(index = 0; index < 3; index++, latency++) { + if (!(latencies & (1 << latency))) { + continue; + } + if (latency == min_latency) + break; + } + /* If I can't find the latency or my index is bad error */ + if ((latency != min_latency) || (index >= 3)) { + goto dimm_err; + } + + /* Read the min_cycle_time for this latency */ + value = spd_read_byte(ctrl->channel0[i], latency_indicies[index]); + if (value < 0) goto hw_error; + + value = convert_to_linear(value); + /* All is good if the selected clock speed + * is what I need or slower. + */ + if (value <= min_cycle_time) { + continue; + } + /* Otherwise I have an error, disable the dimm */ + dimm_err: + dimm_mask = disable_dimm(ctrl, i, dimm_mask, meminfo); + } + + print_tx("4 min_cycle_time:", min_cycle_time); + + /* Now that I know the minimum cycle time lookup the memory parameters */ + result.param = get_mem_param(min_cycle_time); + + /* Update DRAM Config High with our selected memory speed */ + value = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + value &= ~(DCH_MemClkFreq_MASK << DCH_MemClkFreq_SHIFT); + + value |= result.param->dch_memclk << DCH_MemClkFreq_SHIFT; + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, value); + + print_debug(result.param->name); + + /* Update DRAM Timing Low with our selected cas latency */ + value = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); + value &= ~(DTL_TCL_MASK << DTL_TCL_SHIFT); + value |= (min_latency - DTL_TCL_BASE) << DTL_TCL_SHIFT; + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, value); + + result.dimm_mask = dimm_mask; + return result; + hw_error: + result.param = (const struct mem_param *)0; + result.dimm_mask = -1; + return result; +} + +static unsigned convert_to_1_4(unsigned value) +{ + static const uint8_t fraction[] = { 0, 1, 2, 2, 3, 3, 0 }; + unsigned valuex; + + /* We need to convert value to more readable */ + valuex = fraction [value & 0x7]; + return valuex; +} +static int update_dimm_Trc(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + unsigned clocks, old_clocks; + uint32_t dtl; + int value; + int value2; + value = spd_read_byte(ctrl->channel0[i], SPD_TRC); + if (value < 0) return -1; + + value2 = spd_read_byte(ctrl->channel0[i], SPD_TRC -1); + value <<= 2; + value += convert_to_1_4(value2>>4); + + value *=10; + + clocks = (value + param->divisor - 1)/param->divisor; + + if (clocks < DTL_TRC_MIN) { + clocks = DTL_TRC_MIN; + } + if (clocks > DTL_TRC_MAX) { + return 0; + } + + dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); + old_clocks = ((dtl >> DTL_TRC_SHIFT) & DTL_TRC_MASK) + DTL_TRC_BASE; + if (old_clocks >= clocks) { //?? someone did it + // clocks = old_clocks; + return 1; + } + dtl &= ~(DTL_TRC_MASK << DTL_TRC_SHIFT); + dtl |= ((clocks - DTL_TRC_BASE) << DTL_TRC_SHIFT); + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); + return 1; +} + +static int update_dimm_Trfc(const struct mem_controller *ctrl, const struct mem_param *param, int i, struct mem_info *meminfo) +{ + unsigned clocks, old_clocks; + uint32_t dth; + int value; + +#if 0 + int value2; + + value = spd_read_byte(ctrl->channel0[i], SPD_TRFC); + if (value < 0) return -1; + + value2 = spd_read_byte(ctrl->channel0[i], SPD_TRC -1); + if(value2 & 1) value += 256; + value <<= 2; + value += convert_to_1_4(value2>>1); + + if (value == 0) { + value = param->tRFC; + } + value *= 10; + clocks = (value + param->divisor - 1)/param->divisor; +#endif + //get the cs_size --> logic dimm size + value = spd_read_byte(ctrl->channel0[i], SPD_PRI_WIDTH); + if (value < 0) { + return -1; + } + + value = 6 - log2(value); //4-->4, 8-->3, 16-->2 + + clocks = meminfo->sz[i].per_rank - 27 + 2 - value; + + dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH); + + old_clocks = ((dth >> (DTH_TRFC0_SHIFT+i*3)) & DTH_TRFC_MASK); + if (old_clocks >= clocks) { // some one did it? +// clocks = old_clocks; + return 1; + } + dth &= ~(DTH_TRFC_MASK << (DTH_TRFC0_SHIFT+i*3)); + dth |= clocks << (DTH_TRFC0_SHIFT+i*3); + pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth); + return 1; +} + +static int update_dimm_TT_1_4(const struct mem_controller *ctrl, const struct mem_param *param, int i, + unsigned TT_REG, + unsigned SPD_TT, unsigned TT_SHIFT, unsigned TT_MASK, unsigned TT_BASE, unsigned TT_MIN, unsigned TT_MAX ) +{ + unsigned clocks, old_clocks; + uint32_t dtl; + int value; + value = spd_read_byte(ctrl->channel0[i], SPD_TT); //already in 1/4 ns + if (value < 0) return -1; + value *=10; + clocks = (value + param->divisor -1)/param->divisor; + if (clocks < TT_MIN) { + clocks = TT_MIN; + } + if (clocks > TT_MAX) { + return 0; + } + dtl = pci_read_config32(ctrl->f2, TT_REG); + + old_clocks = ((dtl >> TT_SHIFT) & TT_MASK) + TT_BASE; + if (old_clocks >= clocks) { //some one did it? +// clocks = old_clocks; + return 1; + } + dtl &= ~(TT_MASK << TT_SHIFT); + dtl |= ((clocks - TT_BASE) << TT_SHIFT); + pci_write_config32(ctrl->f2, TT_REG, dtl); + return 1; +} + +static int update_dimm_Trcd(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + return update_dimm_TT_1_4(ctrl, param, i, DRAM_TIMING_LOW, SPD_TRCD, DTL_TRCD_SHIFT, DTL_TRCD_MASK, DTL_TRCD_BASE, DTL_TRCD_MIN, DTL_TRCD_MAX); +} + +static int update_dimm_Trrd(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + return update_dimm_TT_1_4(ctrl, param, i, DRAM_TIMING_LOW, SPD_TRRD, DTL_TRRD_SHIFT, DTL_TRRD_MASK, DTL_TRRD_BASE, DTL_TRRD_MIN, DTL_TRRD_MAX); +} + +static int update_dimm_Tras(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + unsigned clocks, old_clocks; + uint32_t dtl; + int value; + value = spd_read_byte(ctrl->channel0[i], SPD_TRAS); //in 1 ns + if (value < 0) return -1; + print_tx("update_dimm_Tras: 0 value=", value); + + value<<=2; //convert it to in 1/4ns + + value *= 10; + print_tx("update_dimm_Tras: 1 value=", value); + + clocks = (value + param->divisor - 1)/param->divisor; + print_tx("update_dimm_Tras: divisor=", param->divisor); + print_tx("update_dimm_Tras: clocks=", clocks); + if (clocks < DTL_TRAS_MIN) { + clocks = DTL_TRAS_MIN; + } + if (clocks > DTL_TRAS_MAX) { + return 0; + } + dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); + old_clocks = ((dtl >> DTL_TRAS_SHIFT) & DTL_TRAS_MASK) + DTL_TRAS_BASE; + if (old_clocks >= clocks) { // someone did it? +// clocks = old_clocks; + return 1; + } + dtl &= ~(DTL_TRAS_MASK << DTL_TRAS_SHIFT); + dtl |= ((clocks - DTL_TRAS_BASE) << DTL_TRAS_SHIFT); + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); + return 1; +} + +static int update_dimm_Trp(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + return update_dimm_TT_1_4(ctrl, param, i, DRAM_TIMING_LOW, SPD_TRP, DTL_TRP_SHIFT, DTL_TRP_MASK, DTL_TRP_BASE, DTL_TRP_MIN, DTL_TRP_MAX); +} + +static int update_dimm_Trtp(const struct mem_controller *ctrl, const struct mem_param *param, int i, struct mem_info *meminfo) +{ + //need to figure if it is 32 byte burst or 64 bytes burst + int offset = 2; + if(!meminfo->is_Width128) { + uint32_t dword; + dword = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + if((dword & DCL_BurstLength32)) offset = 0; + } + return update_dimm_TT_1_4(ctrl, param, i, DRAM_TIMING_LOW, SPD_TRTP, DTL_TRTP_SHIFT, DTL_TRTP_MASK, DTL_TRTP_BASE+offset, DTL_TRTP_MIN+offset, DTL_TRTP_MAX+offset); +} + + +static int update_dimm_Twr(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + return update_dimm_TT_1_4(ctrl, param, i, DRAM_TIMING_LOW, SPD_TWR, DTL_TWR_SHIFT, DTL_TWR_MASK, DTL_TWR_BASE, DTL_TWR_MIN, DTL_TWR_MAX); +} + + +static int update_dimm_Tref(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + uint32_t dth, dth_old; + int value; + value = spd_read_byte(ctrl->channel0[i], SPD_TREF); // 0: 15.625us, 1: 3.9us 2: 7.8 us.... + if (value < 0) return -1; + + if(value == 1 ) { + value = 3; + } else { + value = 2; + } + + dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH); + + dth_old = dth; + dth &= ~(DTH_TREF_MASK << DTH_TREF_SHIFT); + dth |= (value << DTH_TREF_SHIFT); + if(dth_old != dth) { + pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth); + } + return 1; +} + +static void set_4RankRDimm(const struct mem_controller *ctrl, const struct mem_param *param, struct mem_info *meminfo) +{ +#if QRANK_DIMM_SUPPRT == 1 + int value; + int i; + + + if(!(meminfo->is_registered)) return; + + value = 0; + + for(i = 0; i < DIMM_SOCKETS; i++) { + if (!(dimm_mask & (1 << i))) { + continue; + } + + if(meminfo->sz.rank == 4) { + value = 1; + break; + } + } + + if(value == 1) { + uint32_t dch; + dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + dch |= DCH_FourRankRDimm; + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); + } +#endif +} + + +static uint32_t get_extra_dimm_mask(const struct mem_controller *ctrl, struct mem_info *meminfo) +{ + int i; + + uint32_t mask_x4; + uint32_t mask_x16; + uint32_t mask_single_rank; + uint32_t mask_page_1k; + int value; +#if QRANK_DIMM_SUPPORT == 1 + int rank; +#endif + + long dimm_mask = meminfo->dimm_mask; + + + mask_x4 = 0; + mask_x16 = 0; + mask_single_rank = 0; + mask_page_1k = 0; + + for(i = 0; i < DIMM_SOCKETS; i++) { + + if (!(dimm_mask & (1 << i))) { + continue; + } + + if(meminfo->sz[i].rank == 1) { + mask_single_rank |= 1<<i; + } + + if(meminfo->sz[i].col==10) { + mask_page_1k |= 1<<i; + } + + + value = spd_read_byte(ctrl->channel0[i], SPD_PRI_WIDTH); + + #if QRANK_DIMM_SUPPORT == 1 + rank = meminfo->sz[i].rank; + #endif + + if(value==4) { + mask_x4 |= (1<<i); + #if QRANK_DIMM_SUPPORT == 1 + if(rank==4) { + mask_x4 |= 1<<(i+2); + } + #endif + } else if(value==16) { + mask_x16 |= (1<<i); + #if QRANK_DIMM_SUPPORT == 1 + if(rank==4) { + mask_x16 |= 1<<(i+2); + } + #endif + } + + } + + meminfo->x4_mask= mask_x4; + meminfo->x16_mask = mask_x16; + + meminfo->single_rank_mask = mask_single_rank; + meminfo->page_1k_mask = mask_page_1k; + + return mask_x4; + +} + + +static void set_dimm_x4(const struct mem_controller *ctrl, const struct mem_param *param, struct mem_info *meminfo) +{ + uint32_t dcl; + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dcl &= ~(DCL_X4Dimm_MASK<<DCL_X4Dimm_SHIFT); + dcl |= ((meminfo->x4_mask) & 0xf) << (DCL_X4Dimm_SHIFT); + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); +} + +static int count_ones(uint32_t dimm_mask) +{ + int dimms; + unsigned index; + dimms = 0; + for(index = 0; index < DIMM_SOCKETS; index++, dimm_mask>>=1) { + if (dimm_mask & 1) { + dimms++; + } + } + return dimms; +} + + +static void set_DramTerm(const struct mem_controller *ctrl, const struct mem_param *param, struct mem_info *meminfo) +{ + uint32_t dcl; + unsigned odt; + odt = 1; // 75 ohms + + if(param->divisor == 100) { //DDR2 800 + if(meminfo->is_Width128) { + if(count_ones(meminfo->dimm_mask & 0x0f)==2) { + odt = 3; //50 ohms + } + } + + } + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dcl &= ~(DCL_DramTerm_MASK<<DCL_DramTerm_SHIFT); + dcl |= (odt & DCL_DramTerm_MASK) << (DCL_DramTerm_SHIFT); + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); +} + + +static void set_ecc(const struct mem_controller *ctrl,const struct mem_param *param, long dimm_mask, struct mem_info *meminfo) +{ + int i; + int value; + + uint32_t dcl, nbcap; + nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP); + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dcl &= ~DCL_DimmEccEn; + if (nbcap & NBCAP_ECC) { + dcl |= DCL_DimmEccEn; + } + if (read_option(CMOS_VSTART_ECC_memory, CMOS_VLEN_ECC_memory, 1) == 0) { + dcl &= ~DCL_DimmEccEn; + } + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); + + meminfo->is_ecc = 1; + if(!(dcl & DCL_DimmEccEn)) { + meminfo->is_ecc = 0; + return; // already disabled the ECC, so don't need to read SPD any more + } + + for(i = 0; i < DIMM_SOCKETS; i++) { + + if (!(dimm_mask & (1 << i))) { + continue; + } + + value = spd_read_byte(ctrl->channel0[i], SPD_DIMM_CONF_TYPE); + + if(!(value & SPD_DIMM_CONF_TYPE_ECC)) { + dcl &= ~DCL_DimmEccEn; + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); + meminfo->is_ecc = 0; + return; + } + + } +} + +static int update_dimm_Twtr(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + + return update_dimm_TT_1_4(ctrl, param, i, DRAM_TIMING_HIGH, SPD_TWTR, DTH_TWTR_SHIFT, DTH_TWTR_MASK, DTH_TWTR_BASE, DTH_TWTR_MIN, DTH_TWTR_MAX); + +} + +static void set_TT(const struct mem_controller *ctrl, const struct mem_param *param, unsigned TT_REG, + unsigned TT_SHIFT, unsigned TT_MASK, unsigned TT_BASE, unsigned TT_MIN, unsigned TT_MAX, unsigned val, const char *str) +{ + uint32_t reg; + + if ((val < TT_MIN) || (val > TT_MAX)) { + print_err(str); + die(" Unknown\r\n"); + } + + reg = pci_read_config32(ctrl->f2, TT_REG); + reg &= ~(TT_MASK << TT_SHIFT); + reg |= ((val - TT_BASE) << TT_SHIFT); + pci_write_config32(ctrl->f2, TT_REG, reg); + return; +} + +static void set_TrwtTO(const struct mem_controller *ctrl, const struct mem_param *param) +{ + set_TT(ctrl, param, DRAM_TIMING_HIGH, DTH_TRWTTO_SHIFT, DTH_TRWTTO_MASK,DTH_TRWTTO_BASE, DTH_TRWTTO_MIN, DTH_TRWTTO_MAX, param->TrwtTO, "TrwtTO"); +} + +static void set_Twrrd(const struct mem_controller *ctrl, const struct mem_param *param) +{ + set_TT(ctrl, param, DRAM_TIMING_HIGH, DTH_TWRRD_SHIFT, DTH_TWRRD_MASK,DTH_TWRRD_BASE, DTH_TWRRD_MIN, DTH_TWRRD_MAX, param->Twrrd, "Twrrd"); +} + +static void set_Twrwr(const struct mem_controller *ctrl, const struct mem_param *param) +{ + set_TT(ctrl, param, DRAM_TIMING_HIGH, DTH_TWRWR_SHIFT, DTH_TWRWR_MASK,DTH_TWRWR_BASE, DTH_TWRWR_MIN, DTH_TWRWR_MAX, param->Twrwr, "Twrwr"); +} + +static void set_Trdrd(const struct mem_controller *ctrl, const struct mem_param *param) +{ + set_TT(ctrl, param, DRAM_TIMING_HIGH, DTH_TRDRD_SHIFT, DTH_TRDRD_MASK,DTH_TRDRD_BASE, DTH_TRDRD_MIN, DTH_TRDRD_MAX, param->Trdrd, "Trdrd"); +} + +static void set_DcqBypassMax(const struct mem_controller *ctrl, const struct mem_param *param) +{ + set_TT(ctrl, param, DRAM_CONFIG_HIGH, DCH_DcqBypassMax_SHIFT, DCH_DcqBypassMax_MASK,DCH_DcqBypassMax_BASE, DCH_DcqBypassMax_MIN, DCH_DcqBypassMax_MAX, param->DcqByPassMax, "DcqBypassMax"); // value need to be in CMOS +} + +static void set_Tfaw(const struct mem_controller *ctrl, const struct mem_param *param, struct mem_info *meminfo) +{ + static const uint8_t faw_1k[] = {8, 10, 13, 14}; + static const uint8_t faw_2k[] = {10, 14, 17, 18}; + unsigned memclkfreq_index; + unsigned faw; + + + memclkfreq_index = param->dch_memclk; + + if(meminfo->page_1k_mask != 0) { //1k page + faw = faw_1k[memclkfreq_index]; + } + else { + faw = faw_2k[memclkfreq_index]; + } + + set_TT(ctrl, param, DRAM_CONFIG_HIGH, DCH_FourActWindow_SHIFT, DCH_FourActWindow_MASK, DCH_FourActWindow_BASE, DCH_FourActWindow_MIN, DCH_FourActWindow_MAX, faw, "FourActWindow"); + +} + + +static void set_max_async_latency(const struct mem_controller *ctrl, const struct mem_param *param) +{ + uint32_t dch; + unsigned async_lat; + + + dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + dch &= ~(DCH_MaxAsyncLat_MASK << DCH_MaxAsyncLat_SHIFT); + + async_lat = 6+6; + + + dch |= ((async_lat - DCH_MaxAsyncLat_BASE) << DCH_MaxAsyncLat_SHIFT); + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); +} + +static void set_SlowAccessMode(const struct mem_controller *ctrl) +{ + uint32_t dch; + + dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + + dch |= (1<<20); + + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); +} + + +/* + DRAM_OUTPUT_DRV_COMP_CTRL 0, 0x20 + DRAM_ADDR_TIMING_CTRL 04, 0x24 +*/ +static void set_misc_timing(const struct mem_controller *ctrl, struct mem_info *meminfo) +{ + uint32_t dword; + uint32_t dwordx; + unsigned SlowAccessMode = 0; + + long dimm_mask = meminfo->dimm_mask & 0x0f; + +#if DIMM_SUPPORT==0x0104 /* DDR2 and REG */ + /* for REG DIMM */ + dword = 0x00111222; + dwordx = 0x002f0000; + switch (meminfo->memclk_set) { + case DCH_MemClkFreq_266MHz: + if( (dimm_mask == 0x03) || (dimm_mask == 0x02) || (dimm_mask == 0x01)) { + dwordx = 0x002f2700; + } + break; + case DCH_MemClkFreq_333MHz: + if( (dimm_mask == 0x03) || (dimm_mask == 0x02) || (dimm_mask == 0x01)) { + if ((meminfo->single_rank_mask & 0x03)!=0x03) { //any double rank there? + dwordx = 0x002f2f00; + } + } + break; + case DCH_MemClkFreq_400MHz: + dwordx = 0x002f3300; + break; + } + +#endif + +#if DIMM_SUPPORT==0x0004 /* DDR2 and unbuffered */ + /* for UNBUF DIMM */ + dword = 0x00111222; + dwordx = 0x002f2f00; + switch (meminfo->memclk_set) { + case DCH_MemClkFreq_200MHz: + if(dimm_mask == 0x03) { + SlowAccessMode = 1; + dword = 0x00111322; + } + break; + case DCH_MemClkFreq_266MHz: + if(dimm_mask == 0x03) { + SlowAccessMode = 1; + dword = 0x00111322; + if((meminfo->x4_mask == 0 ) && (meminfo->x16_mask == 0)) { + switch (meminfo->single_rank_mask) { + case 0x03: + dwordx = 0x00002f00; //x8 single Rank + break; + case 0x00: + dwordx = 0x00342f00; //x8 double Rank + break; + default: + dwordx = 0x00372f00; //x8 single Rank and double Rank mixed + } + } else if((meminfo->x4_mask == 0 ) && (meminfo->x16_mask == 0x01) && (meminfo->single_rank_mask == 0x01)) { + dwordx = 0x00382f00; //x8 Double Rank and x16 single Rank mixed + } else if((meminfo->x4_mask == 0 ) && (meminfo->x16_mask == 0x02) && (meminfo->single_rank_mask == 0x02)) { + dwordx = 0x00382f00; //x16 single Rank and x8 double Rank mixed + } + + } + else { + if((meminfo->x4_mask == 0 ) && (meminfo->x16_mask == 0x00) && ((meminfo->single_rank_mask == 0x01)||(meminfo->single_rank_mask == 0x02))) { //x8 single rank + dwordx = 0x002f2f00; + } else { + dwordx = 0x002b2f00; + } + } + break; + case DCH_MemClkFreq_333MHz: + dwordx = 0x00202220; + if(dimm_mask == 0x03) { + SlowAccessMode = 1; + dword = 0x00111322; + if((meminfo->x4_mask == 0 ) && (meminfo->x16_mask == 0)) { + switch (meminfo->single_rank_mask) { + case 0x03: + dwordx = 0x00302220; //x8 single Rank + break; + case 0x00: + dwordx = 0x002b2220; //x8 double Rank + break; + defalut: + dwordx = 0x002a2220; //x8 single Rank and double Rank mixed + } + } else if((meminfo->x4_mask == 0) && (meminfo->x16_mask == 0x01) && (meminfo->single_rank_mask == 0x01)) { + dwordx = 0x002c2220; //x8 Double Rank and x16 single Rank mixed + } else if((meminfo->x4_mask == 0) && (meminfo->x16_mask == 0x02) && (meminfo->single_rank_mask == 0x02)) { + dwordx = 0x002c2220; //x16 single Rank and x8 double Rank mixed + } + } + break; + case DCH_MemClkFreq_400MHz: + dwordx = 0x00202520; + SlowAccessMode = 1; + if(dimm_mask == 0x03) { + dword = 0x00113322; + } else { + dword = 0x00113222; + } + break; + } + + print_raminit("\tdimm_mask = ", meminfo->dimm_mask); + print_raminit("\tx4_mask = ", meminfo->x4_mask); + print_raminit("\tx16_mask = ", meminfo->x16_mask); + print_raminit("\tsingle_rank_mask = ", meminfo->single_rank_mask); + print_raminit("\tODC = ", dword); + print_raminit("\tAddr Timing= ", dwordx); +#endif + +#if (DIMM_SUPPORT & 0x0100)==0x0000 /* 2T mode only used for unbuffered DIMM */ + if(SlowAccessMode) { + set_SlowAccessMode(ctrl); + } +#endif + + /* Program the Output Driver Compensation Control Registers (Function 2:Offset 0x9c, index 0, 0x20) */ + pci_write_config32_index_wait(ctrl->f2, 0x98, 0, dword); + if(meminfo->is_Width128) { + pci_write_config32_index_wait(ctrl->f2, 0x98, 0x20, dword); + } + + /* Program the Address Timing Control Registers (Function 2:Offset 0x9c, index 4, 0x24) */ + pci_write_config32_index_wait(ctrl->f2, 0x98, 4, dwordx); + if(meminfo->is_Width128) { + pci_write_config32_index_wait(ctrl->f2, 0x98, 0x24, dwordx); + } + +} + + +static void set_RDqsEn(const struct mem_controller *ctrl, const struct mem_param *param, struct mem_info *meminfo) +{ +#if CPU_SOCKET_TYPE==0x10 + //only need to set for reg and x8 + uint32_t dch; + + dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + + dch &= ~DCH_RDqsEn; + if((!meminfo->x4_mask) && (!meminfo->x16_mask)) { + dch |= DCH_RDqsEn; + } + + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); +#endif +} + + +static void set_idle_cycle_limit(const struct mem_controller *ctrl, const struct mem_param *param) +{ + uint32_t dcm; + /* AMD says to Hardcode this */ + dcm = pci_read_config32(ctrl->f2, DRAM_CTRL_MISC); + dcm &= ~(DCM_ILD_lmt_MASK << DCM_ILD_lmt_SHIFT); + dcm |= DCM_ILD_lmt_16 << DCM_ILD_lmt_SHIFT; + dcm |= DCM_DCC_EN; + pci_write_config32(ctrl->f2, DRAM_CTRL_MISC, dcm); +} + +static void set_RdWrQByp(const struct mem_controller *ctrl, const struct mem_param *param) +{ + set_TT(ctrl, param, DRAM_CTRL_MISC, DCM_RdWrQByp_SHIFT, DCM_RdWrQByp_MASK,0, 0, 3, 2, "RdWrQByp"); +} + + + +static long spd_set_dram_timing(const struct mem_controller *ctrl, const struct mem_param *param, long dimm_mask, struct mem_info *meminfo) +{ + int i; + + for(i = 0; i < DIMM_SOCKETS; i++) { + int rc; + if (!(dimm_mask & (1 << i))) { + continue; + } + print_tx("dimm socket: ", i); + /* DRAM Timing Low Register */ + print_t("\ttrc\r\n"); + if ((rc = update_dimm_Trc (ctrl, param, i)) <= 0) goto dimm_err; + + print_t("\ttrcd\r\n"); + if ((rc = update_dimm_Trcd(ctrl, param, i)) <= 0) goto dimm_err; + + print_t("\ttrrd\r\n"); + if ((rc = update_dimm_Trrd(ctrl, param, i)) <= 0) goto dimm_err; + + print_t("\ttras\r\n"); + if ((rc = update_dimm_Tras(ctrl, param, i)) <= 0) goto dimm_err; + + print_t("\ttrp\r\n"); + if ((rc = update_dimm_Trp (ctrl, param, i)) <= 0) goto dimm_err; + + print_t("\ttrtp\r\n"); + if ((rc = update_dimm_Trtp(ctrl, param, i, meminfo)) <= 0) goto dimm_err; + + print_t("\ttwr\r\n"); + if ((rc = update_dimm_Twr (ctrl, param, i)) <= 0) goto dimm_err; + + /* DRAM Timing High Register */ + print_t("\ttref\r\n"); + if ((rc = update_dimm_Tref(ctrl, param, i)) <= 0) goto dimm_err; + + print_t("\ttwtr\r\n"); + if ((rc = update_dimm_Twtr(ctrl, param, i)) <= 0) goto dimm_err; + + print_t("\ttrfc\r\n"); + if ((rc = update_dimm_Trfc(ctrl, param, i, meminfo)) <= 0) goto dimm_err; + + /* DRAM Config Low */ + + continue; + dimm_err: + if (rc < 0) { + return -1; + } + dimm_mask = disable_dimm(ctrl, i, dimm_mask, meminfo); + } + + meminfo->dimm_mask = dimm_mask; // store final dimm_mask + + get_extra_dimm_mask(ctrl, meminfo); // will be used by RDqsEn and dimm_x4 + /* DRAM Timing Low Register */ + + /* DRAM Timing High Register */ + set_TrwtTO(ctrl, param); + set_Twrrd (ctrl, param); + set_Twrwr (ctrl, param); + set_Trdrd (ctrl, param); + + set_4RankRDimm(ctrl, param, meminfo); + + /* DRAM Config High */ + set_Tfaw(ctrl, param, meminfo); + set_DcqBypassMax(ctrl, param); + set_max_async_latency(ctrl, param); + set_RDqsEn(ctrl, param, meminfo); + + /* DRAM Config Low */ + set_ecc(ctrl, param, dimm_mask, meminfo); + set_dimm_x4(ctrl, param, meminfo); + set_DramTerm(ctrl, param, meminfo); + + /* DRAM Control Misc */ + set_idle_cycle_limit(ctrl, param); + set_RdWrQByp(ctrl, param); + + return dimm_mask; +} + +static void sdram_set_spd_registers(const struct mem_controller *ctrl, struct sys_info *sysinfo) +{ + struct spd_set_memclk_result result; + const struct mem_param *param; + struct mem_param paramx; + struct mem_info *meminfo; + long dimm_mask; +#if 1 + if (!sysinfo->ctrl_present[ctrl->node_id]) { +// print_debug("No memory controller present\r\n"); + return; + } +#endif + meminfo = &sysinfo->meminfo[ctrl->node_id]; + + print_debug_addr("sdram_set_spd_registers: paramx :", ¶mx); + + activate_spd_rom(ctrl); + dimm_mask = spd_detect_dimms(ctrl); + if (!(dimm_mask & ((1 << DIMM_SOCKETS) - 1))) { + print_debug("No memory for this cpu\r\n"); + return; + } + dimm_mask = spd_enable_2channels(ctrl, dimm_mask, meminfo); + if (dimm_mask < 0) + goto hw_spd_err; + dimm_mask = spd_set_ram_size(ctrl , dimm_mask, meminfo); + if (dimm_mask < 0) + goto hw_spd_err; + dimm_mask = spd_handle_unbuffered_dimms(ctrl, dimm_mask, meminfo); + if (dimm_mask < 0) + goto hw_spd_err; + result = spd_set_memclk(ctrl, dimm_mask, meminfo); + param = result.param; + dimm_mask = result.dimm_mask; + if (dimm_mask < 0) + goto hw_spd_err; + + //store memclk set to sysinfo, incase we need rebuilt param again + meminfo->memclk_set = param->dch_memclk; + + memcpy(¶mx, param, sizeof(paramx)); + + paramx.divisor = get_exact_divisor(param->dch_memclk, paramx.divisor); + + dimm_mask = spd_set_dram_timing(ctrl, ¶mx , dimm_mask, meminfo); // dimm_mask will be stored to meminfo->dimm_mask + if (dimm_mask < 0) + goto hw_spd_err; + + order_dimms(ctrl, meminfo); + + return; + hw_spd_err: + /* Unrecoverable error reading SPD data */ + print_err("SPD error - reset\r\n"); + hard_reset(); + return; +} + +#define TIMEOUT_LOOPS 300000 + +#include "raminit_f_dqs.c" + +#if HW_MEM_HOLE_SIZEK != 0 +static uint32_t hoist_memory(int controllers, const struct mem_controller *ctrl,unsigned hole_startk, int i) +{ + int ii; + uint32_t carry_over; + device_t dev; + uint32_t base, limit; + uint32_t basek; + uint32_t hoist; + int j; + + carry_over = (4*1024*1024) - hole_startk; + + for(ii=controllers - 1;ii>i;ii--) { + base = pci_read_config32(ctrl[0].f1, 0x40 + (ii << 3)); + if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { + continue; + } + limit = pci_read_config32(ctrl[0].f1, 0x44 + (ii << 3)); + limit += (carry_over << 2 ); + base += (carry_over << 2 ); + for(j = 0; j < controllers; j++) { + pci_write_config32(ctrl[j].f1, 0x44 + (ii << 3), limit); + pci_write_config32(ctrl[j].f1, 0x40 + (ii << 3), base ); + } + } + limit = pci_read_config32(ctrl[0].f1, 0x44 + (i << 3)); + limit += (carry_over << 2); + for(j = 0; j < controllers; j++) { + pci_write_config32(ctrl[j].f1, 0x44 + (i << 3), limit); + } + dev = ctrl[i].f1; + base = pci_read_config32(dev, 0x40 + (i << 3)); + basek = (base & 0xffff0000) >> 2; + if(basek == hole_startk) { + //don't need set memhole here, because hole off set will be 0, overflow + //so need to change base reg instead, new basek will be 4*1024*1024 + base &= 0x0000ffff; + base |= (4*1024*1024)<<2; + for(j = 0; j < controllers; j++) { + pci_write_config32(ctrl[j].f1, 0x40 + (i<<3), base); + } + } + else + { + hoist = /* hole start address */ + ((hole_startk << 10) & 0xff000000) + + /* hole address to memory controller address */ + (((basek + carry_over) >> 6) & 0x0000ff00) + + /* enable */ + 1; + pci_write_config32(dev, 0xf0, hoist); + } + + return carry_over; +} + +static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl) +{ + + uint32_t hole_startk; + int i; + + hole_startk = 4*1024*1024 - HW_MEM_HOLE_SIZEK; + +#if HW_MEM_HOLE_SIZE_AUTO_INC == 1 + //We need to double check if the hole_startk is valid, if it is equal to basek, we need to decrease it some + uint32_t basek_pri; + for(i=0; i<controllers; i++) { + uint32_t base; + unsigned base_k; + base = pci_read_config32(ctrl[0].f1, 0x40 + (i << 3)); + if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { + continue; + } + base_k = (base & 0xffff0000) >> 2; + if(base_k == hole_startk) { + hole_startk -= (base_k - basek_pri)>>1; // decrease mem hole startk to make sure it is on middle of previous node + break; //only one hole + } + basek_pri = base_k; + } +#endif + //find node index that need do set hole + for(i=0; i<controllers; i++) { + uint32_t base, limit; + unsigned base_k, limit_k; + base = pci_read_config32(ctrl[0].f1, 0x40 + (i << 3)); + if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { + continue; + } + limit = pci_read_config32(ctrl[0].f1, 0x44 + (i << 3)); + base_k = (base & 0xffff0000) >> 2; + limit_k = ((limit + 0x00010000) & 0xffff0000) >> 2; + if ((base_k <= hole_startk) && (limit_k > hole_startk)) { + unsigned end_k; + hoist_memory(controllers, ctrl, hole_startk, i); + end_k = memory_end_k(ctrl, controllers); + set_top_mem(end_k, hole_startk); + break; //only one hole + } + } + +} + +#endif + +static void sdram_enable(int controllers, const struct mem_controller *ctrl, struct sys_info *sysinfo) +{ + int i; + + +#if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 + unsigned cpu_f0_f1[8]; + tsc_t tsc, tsc0[8]; + + print_debug_addr("sdram_enable: tsc0[8]: ", &tsc0[0]); +#endif + uint32_t dword; + + /* Error if I don't have memory */ + if (memory_end_k(ctrl, controllers) == 0) { + die("No memory\r\n"); + } + + /* Before enabling memory start the memory clocks */ + for(i = 0; i < controllers; i++) { + uint32_t dtl, dch; + if (!sysinfo->ctrl_present[ i ]) + continue; + dch = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_HIGH); + + // if no memory installed, disabled the interface + if(sysinfo->meminfo[i].dimm_mask==0x00){ + dch |= DCH_DisDramInterface; + pci_write_config32(ctrl[i].f2, DRAM_CONFIG_HIGH, dch); + + } + else { + dch |= DCH_MemClkFreqVal; + pci_write_config32(ctrl[i].f2, DRAM_CONFIG_HIGH, dch); + /* address timing and Output driver comp Control */ + set_misc_timing(ctrl+i, sysinfo->meminfo+i ); + } + } + + /* We need to wait a mimmium of 20 MEMCLKS to enable the InitDram */ + memreset(controllers, ctrl); + + for(i = 0; i < controllers; i++) { + uint32_t dcl, dch; + if (!sysinfo->ctrl_present[ i ]) + continue; + /* Skip everything if I don't have any memory on this controller */ + dch = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_HIGH); + if (!(dch & DCH_MemClkFreqVal)) { + continue; + } + + /* ChipKill */ + dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); + if (dcl & DCL_DimmEccEn) { + uint32_t mnc; + print_spew("ECC enabled\r\n"); + mnc = pci_read_config32(ctrl[i].f3, MCA_NB_CONFIG); + mnc |= MNC_ECC_EN; + if (dcl & DCL_Width128) { + mnc |= MNC_CHIPKILL_EN; + } + pci_write_config32(ctrl[i].f3, MCA_NB_CONFIG, mnc); + } + +#if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 + cpu_f0_f1[i] = is_cpu_pre_f2_in_bsp(i); + if(cpu_f0_f1[i]) { + //Rev F0/F1 workaround +#if 1 + /* Set the DqsRcvEnTrain bit */ + dword = pci_read_config32(ctrl[i].f2, DRAM_CTRL); + dword |= DC_DqsRcvEnTrain; + pci_write_config32(ctrl[i].f2, DRAM_CTRL, dword); +#endif + tsc0[i] = rdtsc(); + } +#endif + +#if 0 + /* Set the DqsRcvEnTrain bit */ + dword = pci_read_config32(ctrl[i].f2, DRAM_CTRL); + dword |= DC_DqsRcvEnTrain; + pci_write_config32(ctrl[i].f2, DRAM_CTRL, dword); +#endif + + pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl); + dcl |= DCL_InitDram; + pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl); + + } + + for(i = 0; i < controllers; i++) { + uint32_t dcl, dch, dcm; + if (!sysinfo->ctrl_present[ i ]) + continue; + /* Skip everything if I don't have any memory on this controller */ + if(sysinfo->meminfo[i].dimm_mask==0x00) continue; + + print_debug("Initializing memory: "); + int loops = 0; + do { + dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); + loops++; + if ((loops & 1023) == 0) { + print_debug("."); + } + } while(((dcl & DCL_InitDram) != 0) && (loops < TIMEOUT_LOOPS)); + if (loops >= TIMEOUT_LOOPS) { + print_debug(" failed\r\n"); + continue; + } + + /* Wait until it is safe to touch memory */ + do { + dcm = pci_read_config32(ctrl[i].f2, DRAM_CTRL_MISC); + } while(((dcm & DCM_MemClrStatus) == 0) /* || ((dcm & DCM_DramEnabled) == 0)*/ ); + +#if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 + if(cpu_f0_f1[i]) { + tsc= rdtsc(); + + print_debug_dqs_tsc("\r\nbegin tsc0", i, tsc0[i].hi, tsc0[i].lo, 2); + print_debug_dqs_tsc("end tsc ", i, tsc.hi, tsc.lo, 2); + + if(tsc.lo<tsc0[i].lo) { + tsc.hi--; + } + tsc.lo -= tsc0[i].lo; + tsc.hi -= tsc0[i].hi; + + tsc0[i].lo = tsc.lo; + tsc0[i].hi = tsc.hi; + + print_debug_dqs_tsc(" dtsc0", i, tsc0[i].hi, tsc0[i].lo, 2); + } +#endif + print_debug(" done\r\n"); + } + +#if HW_MEM_HOLE_SIZEK != 0 + // init hw mem hole here + /* DramHoleValid bit only can be set after MemClrStatus is set by Hardware */ + set_hw_mem_hole(controllers, ctrl); +#endif + + //store tom to sysinfo, and it will be used by dqs_timing + { + msr_t msr; + //[1M, TOM) + msr = rdmsr(TOP_MEM); + sysinfo->tom_k = ((msr.hi<<24) | (msr.lo>>8))>>2; + + //[4G, TOM2) + msr = rdmsr(TOP_MEM2); + sysinfo->tom2_k = ((msr.hi<<24)| (msr.lo>>8))>>2; + } + + for(i = 0; i < controllers; i++) { + sysinfo->mem_trained[i] = 0; + } + +#if MEM_TRAIN_SEQ == 0 + #if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 + dqs_timing(controllers, ctrl, tsc0, sysinfo); + #else + dqs_timing(controllers, ctrl, sysinfo); + #endif +#else + + #if MEM_TRAIN_SEQ == 2 + //need to enable mtrr, so dqs training could access the test address + setup_mtrr_dqs(sysinfo->tom_k, sysinfo->tom2_k); + #endif + + for(i = 0; i < controllers; i++) { + if (!sysinfo->ctrl_present[ i ]) + continue; + + /* Skip everything if I don't have any memory on this controller */ + if(sysinfo->meminfo[i].dimm_mask==0x00) continue; + + dqs_timing(i, ctrl, sysinfo, 1); + + #if MEM_TRAIN_SEQ == 1 + break; // only train the first node with ram + #endif + } + + #if MEM_TRAIN_SEQ == 2 + clear_mtrr_dqs(sysinfo->tom2_k); + #endif + +#endif + + +} +static void fill_mem_ctrl(int controllers, struct mem_controller *ctrl_a, const uint16_t *spd_addr) +{ + int i; + int j; + struct mem_controller *ctrl; + for(i=0;i<controllers; i++) { + ctrl = &ctrl_a[i]; + ctrl->node_id = i; + ctrl->f0 = PCI_DEV(0, 0x18+i, 0); + ctrl->f1 = PCI_DEV(0, 0x18+i, 1); + ctrl->f2 = PCI_DEV(0, 0x18+i, 2); + ctrl->f3 = PCI_DEV(0, 0x18+i, 3); + + if(spd_addr == (void *)0) continue; + + for(j=0;j<DIMM_SOCKETS;j++) { + ctrl->channel0[j] = spd_addr[(i*2+0)*DIMM_SOCKETS + j]; + ctrl->channel1[j] = spd_addr[(i*2+1)*DIMM_SOCKETS + j]; + } + } +}
Added: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit_f_dqs.c =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit_f_dqs.c (rev 0) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/raminit_f_dqs.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,2036 @@ +/* + yhlu 2005.10 dqs training +*/ +//0: mean no debug info +#define DQS_TRAIN_DEBUG 0 + +static inline void print_debug_dqs(const char *str, unsigned val, unsigned level) +{ +#if DQS_TRAIN_DEBUG > 0 + if(DQS_TRAIN_DEBUG > level) { + #if CONFIG_USE_INIT == 1 + printk_debug("%s%x\r\n", str, val); + #else + print_debug(str); print_debug_hex32(val); print_debug("\r\n"); + #endif + } +#endif +} + +static inline void print_debug_dqs_pair(const char *str, unsigned val, const char *str2, unsigned val2, unsigned level) +{ +#if DQS_TRAIN_DEBUG > 0 + if(DQS_TRAIN_DEBUG > level) { + #if CONFIG_USE_INIT == 1 + printk_debug("%s%08x%s%08x\r\n", str, val, str2, val2); + #else + print_debug(str); print_debug_hex32(val); print_debug(str2); print_debug_hex32(val2); print_debug("\r\n"); + #endif + } +#endif +} + +static inline void print_debug_dqs_tsc(const char *str, unsigned i, unsigned val, unsigned val2, unsigned level) +{ +#if DQS_TRAIN_DEBUG > 0 + if(DQS_TRAIN_DEBUG > level) { + #if CONFIG_USE_INIT == 1 + printk_debug("%s[%02x]=%08x%08x\r\n", str, i, val, val2); + #else + print_debug(str); print_debug("["); print_debug_hex8(i); print_debug("]="); print_debug_hex32(val); print_debug_hex32(val2); print_debug("\r\n"); + #endif + } +#endif +} + +static inline void print_debug_dqs_tsc_x(const char *str, unsigned i, unsigned val, unsigned val2) +{ + #if CONFIG_USE_INIT == 1 + printk_debug("%s[%02x]=%08x%08x\r\n", str, i, val, val2); + #else + print_debug(str); print_debug("["); print_debug_hex8(i); print_debug("]="); print_debug_hex32(val); print_debug_hex32(val2); print_debug("\r\n"); + #endif + +} + +static void fill_mem_cs_sysinfo(unsigned nodeid, const struct mem_controller *ctrl, struct sys_info *sysinfo) +{ + + int i; + sysinfo->mem_base[nodeid] = pci_read_config32(ctrl->f1, 0x40 + (nodeid<<3)); + + for(i=0;i<8; i++) { + sysinfo->cs_base[nodeid*8+i] = pci_read_config32(ctrl->f2, 0x40 + (i<<2)); + } + + sysinfo->hole_reg[nodeid] = pci_read_config32(ctrl->f1, 0xf0); + +} +static unsigned Get_MCTSysAddr(const struct mem_controller *ctrl, unsigned cs_idx, struct sys_info *sysinfo) +{ + uint32_t dword; + uint32_t mem_base; + unsigned nodeid = ctrl->node_id; + +#if HW_MEM_HOLE_SIZEK != 0 + uint32_t hole_reg; +#endif + + //get the local base addr of the chipselect + dword = sysinfo->cs_base[nodeid * 8 + cs_idx]; + dword &= 0xfffffff0; + + //sys addr= node base + local cs base + mem_base = sysinfo->mem_base[nodeid]; + mem_base &= 0xffff0000; + + dword += mem_base; +#if HW_MEM_HOLE_SIZEK != 0 + hole_reg = sysinfo->hole_reg[nodeid]; + if(hole_reg & 1) { + unsigned hole_startk; + hole_startk = (hole_reg & (0xff<<24)) >> 10; + if( (dword >= (hole_startk<<2)) && (dword < ((4*1024*1024)<<2))) { + dword += ((4*1024*1024 - hole_startk)<<2); + } + } +#endif + + //add 1MB offset to avoid compat area + dword += (1<<(20-8)); + + //So final result is upper 32 bit addr + + return dword; + +} + +static unsigned Get_RcvrSysAddr(const struct mem_controller * ctrl, unsigned channel, unsigned cs_idx, struct sys_info *sysinfo) +{ +#if 0 + //get SB_64MuxedMode + uint32_t dword; + dword = pci_read_config32(ctrl->f2, DRAM_CTRL_MISC); + if((dword & DCM_Mode64BitMux) == DCM_Mode64BitMux) { + if(channel) cs_idx += 4; // translate Receiver number to Chipsel + } +#endif + + return Get_MCTSysAddr(ctrl, cs_idx, sysinfo); + +} + +static inline unsigned long read_cr4(void) +{ + unsigned long cr4; + asm volatile ("movl %%cr4, %0" : "=r" (cr4)); + return cr4; +} + +static inline void write_cr4(unsigned long cr4) +{ + asm volatile ("movl %0, %%cr4" : : "r" (cr4)); +} + + +static inline void enable_sse2() +{ + unsigned long cr4; + cr4 = read_cr4(); + cr4 |= (1<<9); + write_cr4(cr4); +} + +static inline void disable_sse2() +{ + unsigned long cr4; + cr4 = read_cr4(); + cr4 &= ~(1<<9); + write_cr4(cr4); +} + + +static void set_wrap32dis(void) { + msr_t msr; + + msr = rdmsr(0xc0010015); + msr.lo |= (1<<17); + + wrmsr(0xc0010015, msr); + +} + +static void clear_wrap32dis(void) { + msr_t msr; + + msr = rdmsr(0xc0010015); + msr.lo &= ~(1<<17); + + wrmsr(0xc0010015, msr); + +} + +static void set_FSBASE(uint32_t addr_hi) +{ + msr_t msr; + + //set fs and use fs prefix to access the mem + msr.hi = addr_hi; + msr.lo = 0; + wrmsr(0xc0000100, msr); //FS_BASE + +} + +#if 0 +static void write_mem(uint32_t addr_hi, uint32_t addr_lo, uint32_t value) +{ + if(addr_hi == 0) { + *((uint32_t *)addr_lo) = value; + return; + } + + set_FSBASE(addr_hi); + + __asm__ volatile ( + "movl %1, %%fs:(%0)\n\t" + :: "a" (addr_lo), "b" (value) + ); + +} + +static uint32_t read_mem(uint32_t addr_hi, uint32_t addr_lo) +{ + unsigned value; + if(addr_hi == 0) { + value = *((uint32_t *)addr_lo); + return value; + } + + set_FSBASE(addr_hi); + + __asm__ volatile ( + "movl %%fs:(%1), %0\n\t" + :"=b"(value): "a" (addr_lo) + ); + + return value; + +} +#endif + +static unsigned ChipSelPresent(const struct mem_controller *ctrl, unsigned cs_idx, struct sys_info *sysinfo) +{ + unsigned enabled; + unsigned nodeid = ctrl->node_id; + + + enabled = sysinfo->cs_base[nodeid * 8 + cs_idx]; + enabled &= 1; + + return enabled; + +} + +static unsigned RcvrRankEnabled(const struct mem_controller *ctrl, int channel, int cs_idx, unsigned is_Width128, struct sys_info *sysinfo) +{ + if(!is_Width128) { + if(channel) return 0; // no channel b + } + + return ChipSelPresent(ctrl, cs_idx, sysinfo); +} + +static void WriteLNTestPattern(unsigned addr_lo, uint8_t *buf_a, unsigned line_num) +{ + __asm__ volatile ( + "1:\n\t" + "movdqa (%3), %%xmm0\n\t" + "movntdq %%xmm0, %%fs:(%0)\n\t" /* xmm0 is 128 bit */ + "addl %1, %0\n\t" + "addl %1, %3\n\t" + "loop 1b\n\t" + + :: "a" (addr_lo), "d" (16), "c" (line_num * 4), "b"(buf_a) + ); + + +} + +static void Write1LTestPattern(unsigned addr, unsigned p, uint8_t *buf_a, uint8_t *buf_b) +{ + uint8_t *buf; + if(p==1) { buf = buf_b; } + else { buf = buf_a; } + + set_FSBASE (addr>>24); + + WriteLNTestPattern(addr<<8, buf, 1); +} + +static void Read1LTestPattern(unsigned addr) +{ + unsigned value; + + set_FSBASE(addr>>24); + + /* 1st move causes read fill (to exclusive or shared)*/ + __asm__ volatile ( + "movl %%fs:(%1), %0\n\t" + :"=b"(value): "a" (addr<<8) + ); + +} + +#define DQS_PASS 0 +#define DQS_FAIL 1 + +#define DQS_FIRST_PASS 1 +#define DQS_SECOND_PASS 2 + +#define SB_NORCVREN 11 +#define RCVREN_MARGIN 6 +#define SB_SmallRCVR 13 +#define SB_CHA2BRCVREN 12 +#define SB_NODQSPOS 14 +#define MIN_DQS_WNDW 3 +#define SB_SMALLDQS 15 + + +static unsigned CompareTestPatternQW0(unsigned channel, unsigned addr, unsigned pattern, const uint32_t *TestPattern0, const uint32_t *TestPattern1, const uint32_t *TestPattern2, unsigned Pass, unsigned is_Width128) +{ + uint32_t addr_lo; + uint32_t *test_buf; + uint32_t value; + uint32_t value_test; + unsigned result = DQS_FAIL; + + if(Pass == DQS_FIRST_PASS) { + if(pattern==1) { + test_buf = (uint32_t *)TestPattern1; + } + else { + test_buf = (uint32_t *)TestPattern0; + } + } + else { + test_buf = (uint32_t *)TestPattern2; + } + + set_FSBASE(addr>>24); + + addr_lo = addr<<8; + + if(is_Width128 && (channel == 1)) { + addr_lo += 8; //second channel + test_buf += 2; + } + + __asm__ volatile ( + "movl %%fs:(%1), %0\n\t" + :"=b"(value): "a" (addr_lo) + ); + + value_test = *test_buf; + + + print_debug_dqs_pair("\t\t\t\t\t\tQW0.lo : test_buf= ", (unsigned)test_buf, " value = ", value_test, 4); + print_debug_dqs_pair("\t\t\t\t\t\tQW0.lo : addr_lo = ", addr_lo, " value = ", value, 4); + + if(value == value_test) { + addr_lo += 4; + test_buf++; + __asm__ volatile ( + "movl %%fs:(%1), %0\n\t" + :"=b"(value): "a" (addr_lo) + ); + value_test = *test_buf; + print_debug_dqs_pair("\t\t\t\t\t\tQW0.hi : test_buf= ", (unsigned)test_buf, " value = ", value_test, 4); + print_debug_dqs_pair("\t\t\t\t\t\tQW0.hi : addr_lo = ", addr_lo, " value = ", value, 4); + + if(value == value_test){ + result = DQS_PASS; + } + } + + if(Pass == DQS_SECOND_PASS) { // second pass need to be inverted + if(result==DQS_PASS) { + result = DQS_FAIL; + } + else { + result = DQS_PASS; + } + } + + return result; + +} + +static void SetMaxAL_RcvrDly(const struct mem_controller *ctrl, unsigned dly) +{ + uint32_t reg; + + dly += (20-1); // round it + dly /= 20; // convert from unit 50ps to 1ns + + dly += 6; + + + reg = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + reg &= ~(DCH_MaxAsyncLat_MASK <<DCH_MaxAsyncLat_SHIFT); + reg |= ((dly - DCH_MaxAsyncLat_BASE) << DCH_MaxAsyncLat_SHIFT); + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, reg); + +} + +/* + Set the Target range to WT IO (using an IORR overlapping the already existing + WB dram type). Use IORR0 +*/ +static void SetTargetWTIO(unsigned addr) +{ + msr_t msr; + msr.hi = addr>>24; + msr.lo = addr<<8; + wrmsr(0xc0010016, msr); //IORR0 BASE + + msr.hi = 0xff; + msr.lo = 0xfc000800; // 64MB Mask + wrmsr(0xc0010017, msr); // IORR0 Mask +} + +static void ResetTargetWTIO(void) +{ + msr_t msr; + + msr.hi = 0; + msr.lo = 0; + wrmsr(0xc0010017, msr); // IORR0 Mask +} + +static void proc_CLFLUSH(unsigned addr) +{ + + set_FSBASE(addr>>24); + + /* 1st move causes read fill (to exclusive or shared)*/ + __asm__ volatile ( + /* clflush fs:[eax] */ + "clflush %%fs:(%0)\n\t" + ::"a" (addr<<8) + ); + +} +static void proc_IOCLFLUSH(unsigned addr) +{ + SetTargetWTIO(addr); + proc_CLFLUSH(addr); + ResetTargetWTIO(); +} + +static void ResetDCTWrPtr(const struct mem_controller *ctrl) +{ + uint32_t dword; + unsigned index = 0x10; + + dword = pci_read_config32_index_wait(ctrl->f2, 0x98, index); + pci_write_config32_index_wait(ctrl->f2, 0x98, index, dword); + +} + + +static uint16_t get_exact_T1000(unsigned i) +{ + // 200 266, 333, 400 + const static uint16_t T1000_a[]= { 5000, 3759, 3003, 2500 }; + + static const uint16_t TT_a[] = { + /*200 266 333 400 */ + /*4 */ 6250, 6250, 6250, 6250, + /*5 */ 5000, 5000, 5000, 2500, + /*6 */ 5000, 4166, 4166, 2500, + /*7 */ 5000, 4285, 3571, 2500, + + /*8 */ 5000, 3750, 3125, 2500, + /*9 */ 5000, 3888, 3333, 2500, + /*10*/ 5000, 4000, 3000, 2500, + /*11*/ 5000, 4090, 3181, 2500, + + /*12*/ 5000, 3750, 3333, 2500, + /*13*/ 5000, 3846, 3076, 2500, + /*14*/ 5000, 3928, 3214, 2500, + /*15*/ 5000, 4000, 3000, 2500, + }; + + unsigned fid_cur; + int index; + + msr_t msr; + msr = rdmsr(0xc0010042); + fid_cur = msr.lo & 0x3f; + + index = fid_cur>>1; + + if(index>12) return T1000_a[i]; + + return TT_a[index * 4+i]; + +} + +static void InitDQSPos4RcvrEn(const struct mem_controller *ctrl) +{ + int i; + uint32_t dword; + + dword = 0x00000000; + for(i=1; i<=3; i++) { + /* Program the DQS Write Timing Control Registers (Function 2:Offset 0x9c, index 0x01-0x03, 0x21-0x23) to 0x00 for all bytes */ + pci_write_config32_index_wait(ctrl->f2, 0x98, i, dword); + pci_write_config32_index_wait(ctrl->f2, 0x98, i+0x20, dword); + } + + dword = 0x2f2f2f2f; + for(i=5; i<=7; i++) { + /* Program the DQS Write Timing Control Registers (Function 2:Offset 0x9c, index 0x05-0x07, 0x25-0x27) to 0x2f for all bytes */ + pci_write_config32_index_wait(ctrl->f2, 0x98, i, dword); + pci_write_config32_index_wait(ctrl->f2, 0x98, i+0x20, dword); + } + + +} +#ifndef K8_REV_F_SUPPORT_F0_F1_WORKAROUND +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 1 +#endif + +static void TrainRcvrEn(const struct mem_controller *ctrl, unsigned Pass, struct sys_info *sysinfo) +{ + + const static uint32_t TestPattern0[] = { + 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa, + 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa, + 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa, + 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa, + }; + const static uint32_t TestPattern1[] = { + 0x55555555, 0x55555555, 0x55555555, 0x55555555, + 0x55555555, 0x55555555, 0x55555555, 0x55555555, + 0x55555555, 0x55555555, 0x55555555, 0x55555555, + 0x55555555, 0x55555555, 0x55555555, 0x55555555, + }; + const static uint32_t TestPattern2[] = { + 0x12345678, 0x87654321, 0x23456789, 0x98765432, + 0x59385824, 0x30496724, 0x24490795, 0x99938733, + 0x40385642, 0x38465245, 0x29432163, 0x05067894, + 0x12349045, 0x98723467, 0x12387634, 0x34587623, + }; + + uint8_t pattern_buf_x[64 * 4 + 16]; // We need to two cache line So have more 16 bytes to keep 16 byte alignment */ + uint8_t *buf_a, *buf_b; + uint32_t ecc_bit; + uint32_t dword; + uint8_t *dqs_rcvr_dly_a = &sysinfo->dqs_rcvr_dly_a[ctrl->node_id * 2* 8] ; //8 node, channel 2, receiver 8 + + int i; + + unsigned channel, receiver; + + unsigned Errors; + unsigned CTLRMaxDelay; + unsigned T1000; + + unsigned LastTest; + unsigned CurrTest; + unsigned Test0, Test1; + + unsigned RcvrEnDlyRmin; + + unsigned two_ranks; + unsigned RcvrEnDly; + + unsigned PatternA; + unsigned PatternB; + + unsigned TestAddr0, TestAddr0B, TestAddr1, TestAddr1B; + + unsigned CurrRcvrCHADelay; + + unsigned tmp; + + unsigned is_Width128 = sysinfo->meminfo[ctrl->node_id].is_Width128; + + unsigned cpu_f0_f1; + + if(Pass == DQS_FIRST_PASS) { + InitDQSPos4RcvrEn(ctrl); + } + + //enable SSE2 + enable_sse2(); + + //wrap32dis + set_wrap32dis(); + + //disable ECC temp + dword = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + ecc_bit = dword & DCL_DimmEccEn; + dword &= ~(DCL_DimmEccEn); + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dword); + + + if(Pass == DQS_FIRST_PASS) { +#if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 + cpu_f0_f1 = is_cpu_pre_f2_in_bsp(ctrl->node_id); + if(!cpu_f0_f1) +#endif + { +#if 1 + /* Set the DqsRcvEnTrain bit */ + dword = pci_read_config32(ctrl->f2, DRAM_CTRL); + dword |= DC_DqsRcvEnTrain; + pci_write_config32(ctrl->f2, DRAM_CTRL, dword); +#endif + } + } + + //get T1000 figures (cycle time (ns)) * 1K + dword = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + dword &= DCH_MemClkFreq_MASK; + + T1000 = get_exact_T1000(dword); + + // SetupRcvrPattern + buf_a = (uint8_t *)(((uint32_t)(&pattern_buf_x[0]) + 0x10) & (0xfffffff0)); + buf_b = buf_a + 128; //?? + if(Pass==DQS_FIRST_PASS) { + for(i=0;i<16;i++) { + *((uint32_t *)(buf_a + i*4)) = TestPattern0[i]; + *((uint32_t *)(buf_b + i*4)) = TestPattern1[i]; + } + } + else { + for(i=0;i<16;i++) { + *((uint32_t *)(buf_a + i*4)) = TestPattern2[i]; + *((uint32_t *)(buf_b + i*4)) = TestPattern2[i]; + } + } + + print_debug_dqs("\r\nTrainRcvEn: 0 ctrl", ctrl->node_id, 0); + + print_debug_addr("TrainRcvEn: buf_a:", buf_a); + + Errors = 0; + /* for each channel */ + CTLRMaxDelay = 0; + for(channel = 0; (channel < 2) && (!Errors); channel++) + { + print_debug_dqs("\tTrainRcvEn51: channel ",channel, 1); + + /* for each rank */ + /* there are four recriver pairs, loosely associated with CS */ + for( receiver = 0; (receiver < 8) && (!Errors); receiver+=2) + { + + unsigned index=(receiver>>1) * 3 + 0x10; + + print_debug_dqs("\t\tTrainRcvEn52: index ", index, 2); + + if(is_Width128) { + if(channel) { + dword = pci_read_config32_index_wait(ctrl->f2, 0x98, index); + CurrRcvrCHADelay= dword & 0xff; + } + } + else { + if(channel) { + index += 0x20; + } + } + + LastTest = DQS_FAIL; + RcvrEnDlyRmin = 0xaf; + + if(!RcvrRankEnabled(ctrl, channel, receiver, is_Width128, sysinfo)) continue; + + /* for each DQS receiver enable setting */ + + TestAddr0 = Get_RcvrSysAddr(ctrl, channel, receiver, sysinfo); + + TestAddr0B = TestAddr0 + (1<<(20+2-8)); // 4MB + + if(RcvrRankEnabled(ctrl, channel, receiver+1, is_Width128, sysinfo)) { + TestAddr1 = Get_RcvrSysAddr(ctrl, channel, receiver+1, sysinfo); + TestAddr1B = TestAddr1 + (1<<(20+2-8)); //4MB + two_ranks = 1; + } + else { + two_ranks = 0; + } + + print_debug_dqs("\t\tTrainRcvEn53: TestAddr0B ", TestAddr0B, 2); + + Write1LTestPattern(TestAddr0, 0, buf_a, buf_b); // rank0 of dimm, test p0 + Write1LTestPattern(TestAddr0B, 1, buf_a, buf_b); //rank0 of dimm, test p1 + + if(two_ranks == 1) { + Write1LTestPattern(TestAddr1, 0, buf_a, buf_b); //rank 1 of dimm + Write1LTestPattern(TestAddr1B, 1, buf_a, buf_b);//rank 1 of dimm + } + + if(Pass == DQS_FIRST_PASS) { + RcvrEnDly = 0; + } else { + RcvrEnDly = dqs_rcvr_dly_a[channel * 8 + receiver]; + } + + while ( RcvrEnDly < 0xaf) { // Sweep Delay value here + print_debug_dqs("\t\t\tTrainRcvEn541: RcvrEnDly ", RcvrEnDly, 3); + + if(RcvrEnDly & 1) { + /* Odd steps get another pattern such that even + and odd steps alternate. + The pointers to the patterns will be swapped + at the end of the loop so they are correspond + */ + PatternA = 1; + PatternB = 0; + } + else { + /* Even step */ + PatternA = 0; + PatternB = 1; + } + + /* Program current Receiver enable delay */ + pci_write_config32_index_wait(ctrl->f2, 0x98, index, RcvrEnDly); + + if(is_Width128) { + /* Program current Receiver enable delay chaannel b */ + pci_write_config32_index_wait(ctrl->f2, 0x98, index+ 0x20, RcvrEnDly); + } + + /* Program the MaxAsyncLat filed with the + current DQS receiver enable setting plus 6ns + */ + /*Porgram MaxAsyncLat to correspond with current delay */ + SetMaxAL_RcvrDly(ctrl, RcvrEnDly); + + CurrTest = DQS_FAIL; + + Read1LTestPattern(TestAddr0); //Cache Fill + /* ROM vs cache compare */ + Test0 = CompareTestPatternQW0(channel, TestAddr0, PatternA, TestPattern0, TestPattern1, TestPattern2, Pass, is_Width128); + proc_IOCLFLUSH(TestAddr0); + + ResetDCTWrPtr(ctrl); + + print_debug_dqs("\t\t\tTrainRcvEn542: Test0 ", Test0, 3); + + if(Test0 == DQS_PASS) { + + Read1LTestPattern(TestAddr0B); + Test1 = CompareTestPatternQW0(channel, TestAddr0B, PatternB, TestPattern0, TestPattern1, TestPattern2, Pass, is_Width128); + proc_IOCLFLUSH(TestAddr0B); + + ResetDCTWrPtr(ctrl); + + print_debug_dqs("\t\t\tTrainRcvEn543: Test1 ", Test1, 3); + + if(Test1 == DQS_PASS) { + if(two_ranks) { + Read1LTestPattern(TestAddr1); + Test0 = CompareTestPatternQW0(channel, TestAddr1, PatternA, TestPattern0, TestPattern1, TestPattern2, Pass, is_Width128); + proc_IOCLFLUSH(TestAddr1); + ResetDCTWrPtr(ctrl); + + if(Test0 == DQS_PASS) { + Read1LTestPattern(TestAddr1B); + Test1 = CompareTestPatternQW0(channel, TestAddr1B, PatternB, TestPattern0, TestPattern1, TestPattern2, Pass, is_Width128); + proc_IOCLFLUSH(TestAddr1B); + ResetDCTWrPtr(ctrl); + + if(Test1 == DQS_PASS) { + CurrTest = DQS_PASS; + } + } + print_debug_dqs("\t\t\tTrainRcvEn544: Test0 ", Test0, 3); + } + else { + CurrTest = DQS_PASS; + } + } + } + + print_debug_dqs("\t\t\tTrainRcvEn55: RcvrEnDly ", RcvrEnDly, 3); + + if(CurrTest == DQS_PASS) { + if(LastTest == DQS_FAIL) { + RcvrEnDlyRmin = RcvrEnDly; + break; + } + } + + LastTest = CurrTest; + + /* swap the rank 0 pointers */ + tmp = TestAddr0; + TestAddr0 = TestAddr0B; + TestAddr0B = tmp; + + /* swap the rank 1 pointers */ + tmp = TestAddr1; + TestAddr1 = TestAddr1B; + TestAddr1B = tmp; + + print_debug_dqs("\t\t\tTrainRcvEn56: RcvrEnDly ", RcvrEnDly, 3); + + RcvrEnDly++; + + } // while RcvrEnDly + + print_debug_dqs("\t\tTrainRcvEn61: RcvrEnDly ", RcvrEnDly, 2); + + if(RcvrEnDlyRmin == 0xaf) { + //no passing window + Errors |= SB_NORCVREN; + } + + if(Pass == DQS_FIRST_PASS) { + // We need a better value for DQSPos trainning + RcvrEnDly = RcvrEnDlyRmin /* + RCVREN_MARGIN * T1000/64/50 */; + } else { + RcvrEnDly = RcvrEnDlyRmin; + } + + if(RcvrEnDly > 0xae) { + //passing window too narrow, too far delayed + Errors |= SB_SmallRCVR; + RcvrEnDly = 0xae; + } + + if(Pass == DQS_SECOND_PASS) { //second pass must average vales + RcvrEnDly += dqs_rcvr_dly_a[channel * 8 + receiver] /* - (RCVREN_MARGIN * T1000/64/50)*/; + RcvrEnDly >>= 1; + } + + dqs_rcvr_dly_a[channel * 8 + receiver] = RcvrEnDly; + + //Set final RcvrEnDly for this DIMM and Channel + pci_write_config32_index_wait(ctrl->f2, 0x98, index, RcvrEnDly); + + if(is_Width128) { + pci_write_config32_index_wait(ctrl->f2, 0x98, index+0x20, RcvrEnDly); // channel B + if(channel) { + pci_write_config32_index_wait(ctrl->f2, 0x98, index, CurrRcvrCHADelay); + if(RcvrEnDly > CurrRcvrCHADelay) { + dword = RcvrEnDly - CurrRcvrCHADelay; + } + else { + dword = CurrRcvrCHADelay - RcvrEnDly; + } + dword *= 50; + if(dword > T1000) { + Errors |= SB_CHA2BRCVREN; + } + } + } + + print_debug_dqs("\t\tTrainRcvEn63: RcvrEnDly ", RcvrEnDly, 2); + + if(RcvrEnDly > CTLRMaxDelay) { + CTLRMaxDelay = RcvrEnDly; + } + + print_debug_dqs("\t\tTrainRcvEn64: CTLRMaxDelay ", CTLRMaxDelay, 2); + + } /* receiver */ + } /* channel */ + + print_debug_dqs("\tTrainRcvEn65: CTLRMaxDelay ", CTLRMaxDelay, 1); + + /* Program the MaxAsysncLat field with the largest DQS Receiver Enable setting */ + SetMaxAL_RcvrDly(ctrl, CTLRMaxDelay); + ResetDCTWrPtr(ctrl); + + //Enable ECC again + dword = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dword &= ~(DCL_DimmEccEn); + dword |= ecc_bit; + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dword); + + if(Pass == DQS_FIRST_PASS) { +#if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 + if(!cpu_f0_f1) +#endif + { + dword = pci_read_config32(ctrl->f2, DRAM_CTRL); + dword &= ~DC_DqsRcvEnTrain; + pci_write_config32(ctrl->f2, DRAM_CTRL, dword); + } + } + + //Clear wrap32dis + + clear_wrap32dis(); + + //restore SSE2 setting + disable_sse2(); + +#if MEM_TRAIN_SEQ != 1 + /* We need tidy output for type 1 */ + #if CONFIG_USE_INIT == 1 + printk_debug(" CTLRMaxDelay=%02x", CTLRMaxDelay); + #else + print_debug(" CTLRMaxDelay="); print_debug_hex8(CTLRMaxDelay); + #endif +#endif + + if(CTLRMaxDelay==0xae) { + soft_reset(); // try more or downgrade? + } + +} + +#define DQS_READDIR 1 +#define DQS_WRITEDIR 0 + + +static void SetDQSDelayCSR(const struct mem_controller *ctrl, unsigned channel, unsigned bytelane, unsigned direction, unsigned dqs_delay) +{ //ByteLane could be 0-8, last is for ECC + unsigned index; + uint32_t dword; + unsigned shift; + + dqs_delay &= 0xff; + + index = (bytelane>>2) + 1 + channel * 0x20 + (direction << 2); + shift = bytelane; + while(shift>3) { + shift-=4; + } + shift <<= 3; // 8 bit + + dword = pci_read_config32_index_wait(ctrl->f2, 0x98, index); + dword &= ~(0x3f<<shift); + dword |= (dqs_delay<<shift); + pci_write_config32_index_wait(ctrl->f2, 0x98, index, dword); + +} + +static void SetDQSDelayAllCSR(const struct mem_controller *ctrl, unsigned channel, unsigned direction, unsigned dqs_delay) +{ + unsigned index; + uint32_t dword; + int i; + + dword = 0; + dqs_delay &= 0xff; + for(i=0;i<4;i++) { + dword |= dqs_delay<<(i*8); + } + + index = 1 + channel * 0x20 + direction * 4; + + for(i=0; i<2; i++) { + pci_write_config32_index_wait(ctrl->f2, 0x98, index + i, dword); + } + +} + +static unsigned MiddleDQS(unsigned min_d, unsigned max_d) +{ + unsigned size_d; + size_d = max_d-min_d; + if(size_d & 1) { //need round up + min_d++; + } + return ( min_d + (size_d>>1)); +} + +static inline void save_dqs_delay(unsigned channel, unsigned bytelane, unsigned direction, uint8_t *dqs_delay_a, uint8_t dqs_delay) +{ + dqs_delay_a[channel * 2*9 + direction * 9 + bytelane] = dqs_delay; +} + +static void WriteDQSTestPattern(unsigned addr_lo, unsigned pattern , uint8_t *buf_a) +{ + WriteLNTestPattern(addr_lo, buf_a, (pattern+1) * 9); +} + +static void ReadL18TestPattern(unsigned addr_lo) +{ + //set fs and use fs prefix to access the mem + __asm__ volatile ( + "movl %%fs:-128(%%esi), %%eax\n\t" //TestAddr cache line + "movl %%fs:-64(%%esi), %%eax\n\t" //+1 + "movl %%fs:(%%esi), %%eax\n\t" //+2 + "movl %%fs:64(%%esi), %%eax\n\t" //+3 + + "movl %%fs:-128(%%edi), %%eax\n\t" //+4 + "movl %%fs:-64(%%edi), %%eax\n\t" //+5 + "movl %%fs:(%%edi), %%eax\n\t" //+6 + "movl %%fs:64(%%edi), %%eax\n\t" //+7 + + "movl %%fs:-128(%%ebx), %%eax\n\t" //+8 + "movl %%fs:-64(%%ebx), %%eax\n\t" //+9 + "movl %%fs:(%%ebx), %%eax\n\t" //+10 + "movl %%fs:64(%%ebx), %%eax\n\t" //+11 + + "movl %%fs:-128(%%ecx), %%eax\n\t" //+12 + "movl %%fs:-64(%%ecx), %%eax\n\t" //+13 + "movl %%fs:(%%ecx), %%eax\n\t" //+14 + "movl %%fs:64(%%ecx), %%eax\n\t" //+15 + + "movl %%fs:-128(%%edx), %%eax\n\t" //+16 + "movl %%fs:-64(%%edx), %%eax\n\t" //+17 + + :: "a"(0), "b" (addr_lo+128+8*64), "c" (addr_lo+128+12*64), "d" (addr_lo +128+16*64), "S"(addr_lo+128), "D"(addr_lo+128+4*64) + ); + +} + +static void ReadL9TestPattern(unsigned addr_lo) +{ + + //set fs and use fs prefix to access the mem + __asm__ volatile ( + + "movl %%fs:-128(%%ecx), %%eax\n\t" //TestAddr cache line + "movl %%fs:-64(%%ecx), %%eax\n\t" //+1 + "movl %%fs:(%%ecx), %%eax\n\t" //+2 + "movl %%fs:64(%%ecx), %%eax\n\t" //+3 + + "movl %%fs:-128(%%edx), %%eax\n\t" //+4 + "movl %%fs:-64(%%edx), %%eax\n\t" //+5 + "movl %%fs:(%%edx), %%eax\n\t" //+6 + "movl %%fs:64(%%edx), %%eax\n\t" //+7 + + "movl %%fs:-128(%%ebx), %%eax\n\t" //+8 + + :: "a"(0), "b" (addr_lo+128+8*64), "c"(addr_lo+128), "d"(addr_lo+128+4*64) + ); + +} + + +static void ReadDQSTestPattern(unsigned addr_lo, unsigned pattern) +{ + if(pattern == 0) { + ReadL9TestPattern(addr_lo); + } + else { + ReadL18TestPattern(addr_lo); + } +} + +static void FlushDQSTestPattern_L9(unsigned addr_lo) +{ + __asm__ volatile ( + "clflush %%fs:-128(%%ecx)\n\t" + "clflush %%fs:-64(%%ecx)\n\t" + "clflush %%fs:(%%ecx)\n\t" + "clflush %%fs:64(%%ecx)\n\t" + + "clflush %%fs:-128(%%eax)\n\t" + "clflush %%fs:-64(%%eax)\n\t" + "clflush %%fs:(%%eax)\n\t" + "clflush %%fs:64(%%eax)\n\t" + + "clflush %%fs:-128(%%ebx)\n\t" + + :: "b" (addr_lo+128+8*64), "c"(addr_lo+128), "a"(addr_lo+128+4*64) + ); + +} +static __attribute__((noinline)) void FlushDQSTestPattern_L18(unsigned addr_lo) +{ + __asm__ volatile ( + "clflush %%fs:-128(%%eax)\n\t" + "clflush %%fs:-64(%%eax)\n\t" + "clflush %%fs:(%%eax)\n\t" + "clflush %%fs:64(%%eax)\n\t" + + "clflush %%fs:-128(%%edi)\n\t" + "clflush %%fs:-64(%%edi)\n\t" + "clflush %%fs:(%%edi)\n\t" + "clflush %%fs:64(%%edi)\n\t" + + "clflush %%fs:-128(%%ebx)\n\t" + "clflush %%fs:-64(%%ebx)\n\t" + "clflush %%fs:(%%ebx)\n\t" + "clflush %%fs:64(%%ebx)\n\t" + + "clflush %%fs:-128(%%ecx)\n\t" + "clflush %%fs:-64(%%ecx)\n\t" + "clflush %%fs:(%%ecx)\n\t" + "clflush %%fs:64(%%ecx)\n\t" + + "clflush %%fs:-128(%%edx)\n\t" + "clflush %%fs:-64(%%edx)\n\t" + + :: "b" (addr_lo+128+8*64), "c" (addr_lo+128+12*64), "d" (addr_lo +128+16*64), "a"(addr_lo+128), "D"(addr_lo+128+4*64) + ); +} + +static void FlushDQSTestPattern(unsigned addr_lo, unsigned pattern ) +{ + + if(pattern == 0){ + FlushDQSTestPattern_L9(addr_lo); + } + else { + FlushDQSTestPattern_L18(addr_lo); + } +} + +static unsigned CompareDQSTestPattern(unsigned channel, unsigned addr_lo, unsigned pattern, uint8_t *buf_a) +{ + uint32_t *test_buf; + unsigned bitmap = 0xff; + unsigned bytelane; + int i; + uint32_t value; + int j; + uint32_t value_test; + + test_buf = (uint32_t *)buf_a; + + + if(pattern && channel) { + addr_lo += 8; //second channel + test_buf+= 2; + } + + bytelane = 0; + for(i=0;i<9*64/4;i++) { + __asm__ volatile ( + "movl %%fs:(%1), %0\n\t" + :"=b"(value): "a" (addr_lo) + ); + value_test = *test_buf; + + print_debug_dqs_pair("\t\t\t\t\t\ttest_buf= ", (unsigned)test_buf, " value = ", value_test, 7); + print_debug_dqs_pair("\t\t\t\t\t\ttaddr_lo = ",addr_lo, " value = ", value, 7); + + for(j=0;j<4*8;j+=8) { + if(((value>>j)&0xff) != ((value_test>>j)& 0xff)) { + bitmap &= ~(1<<bytelane); + } + + bytelane++; + bytelane &= 0x7; + } + print_debug_dqs("\t\t\t\t\t\tbitmap = ", bitmap, 7); + + if(bytelane == 0) { + if(pattern == 1) { //dual channel + addr_lo += 8; //skip over other channel's data + test_buf += 2; + } + } + addr_lo += 4; + test_buf +=1; + + } + + + return bitmap; + +} + +static unsigned TrainDQSPos(const struct mem_controller *ctrl, unsigned channel, unsigned Direction, unsigned Pattern, uint8_t *buf_a, uint8_t *dqs_delay_a, struct sys_info *sysinfo) +{ + unsigned ByteLane; + unsigned Errors; + unsigned BanksPresent; + + unsigned MutualCSPassW[48]; + + unsigned ChipSel; + unsigned DQSDelay; + + unsigned TestAddr; + + unsigned LastTest; + unsigned RnkDlyFilterMax, RnkDlyFilterMin; + unsigned RnkDlySeqPassMax, RnkDlySeqPassMin; + + Errors = 0; + BanksPresent = 0; + + print_debug_dqs("\t\t\tTrainDQSPos begin ", 0, 3); + + print_debug_addr("TrainDQSPos: MutualCSPassW[48] :", MutualCSPassW); + + for(DQSDelay=0; DQSDelay<48; DQSDelay++) { + MutualCSPassW[DQSDelay] = 0xff; // Bitmapped status per delay setting, 0xff=All positions passing (1= PASS) + } + + for(ChipSel = 0; ChipSel < 8; ChipSel++) { //logical register chipselects 0..7 + print_debug_dqs("\t\t\t\tTrainDQSPos: 11 ChipSel ", ChipSel, 4); + if(!ChipSelPresent(ctrl, ChipSel, sysinfo)) continue; + BanksPresent = 1; + + TestAddr = Get_MCTSysAddr(ctrl, ChipSel, sysinfo); + + print_debug_dqs("\t\t\t\tTrainDQSPos: 12 TestAddr ", TestAddr, 4); + + //set fs and use fs prefix to access the mem + set_FSBASE(TestAddr>>24); + + if(Direction == DQS_READDIR) { + print_debug_dqs("\t\t\t\tTrainDQSPos: 13 for read so write at first", 0, 4); + WriteDQSTestPattern(TestAddr<<8, Pattern, buf_a); + } + + for(DQSDelay = 0; DQSDelay < 48; DQSDelay++ ){ + print_debug_dqs("\t\t\t\t\tTrainDQSPos: 141 DQSDelay ", DQSDelay, 5); + if(MutualCSPassW[DQSDelay] == 0) continue; //skip current delay value if other chipselects have failed all 8 bytelanes + SetDQSDelayAllCSR(ctrl, channel, Direction, DQSDelay); + print_debug_dqs("\t\t\t\t\tTrainDQSPos: 142 MutualCSPassW ", MutualCSPassW[DQSDelay], 5); + if(Direction == DQS_WRITEDIR) { + print_debug_dqs("\t\t\t\t\tTrainDQSPos: 143 for write", 0, 5); + WriteDQSTestPattern(TestAddr<<8, Pattern, buf_a); + } + print_debug_dqs("\t\t\t\t\tTrainDQSPos: 144 Pattern ", Pattern, 5); + ReadDQSTestPattern(TestAddr<<8, Pattern); + print_debug_dqs("\t\t\t\t\tTrainDQSPos: 145 MutualCSPassW ", MutualCSPassW[DQSDelay], 5); + MutualCSPassW[DQSDelay] &= CompareDQSTestPattern(channel, TestAddr<<8, Pattern, buf_a); //0: fail, 1=pass + print_debug_dqs("\t\t\t\t\tTrainDQSPos: 146 MutualCSPassW ", MutualCSPassW[DQSDelay], 5); + SetTargetWTIO(TestAddr); + FlushDQSTestPattern(TestAddr<<8, Pattern); + ResetTargetWTIO(); + } + } + + if(BanksPresent) + for(ByteLane = 0; ByteLane < 8; ByteLane++) { + print_debug_dqs("\t\t\t\tTrainDQSPos: 31 ByteLane ",ByteLane, 4); + + LastTest = DQS_FAIL; + RnkDlySeqPassMax = 0; + RnkDlyFilterMax = 0; + RnkDlyFilterMin = 0; + for(DQSDelay=0; DQSDelay<48; DQSDelay++) { + if(MutualCSPassW[DQSDelay] & (1<<ByteLane)) { + + print_debug_dqs("\t\t\t\t\tTrainDQSPos: 321 DQSDelay ", DQSDelay, 5); + print_debug_dqs("\t\t\t\t\tTrainDQSPos: 322 MutualCSPassW ", MutualCSPassW[DQSDelay], 5); + + RnkDlySeqPassMax = DQSDelay; + if(LastTest == DQS_FAIL) { + RnkDlySeqPassMin = DQSDelay; //start sequential run + } + if((RnkDlySeqPassMax - RnkDlySeqPassMin)>(RnkDlyFilterMax-RnkDlyFilterMin)){ + RnkDlyFilterMin = RnkDlySeqPassMin; + RnkDlyFilterMax = RnkDlySeqPassMax; + } + LastTest = DQS_PASS; + } + else { + LastTest = DQS_FAIL; + } + } + print_debug_dqs("\t\t\t\tTrainDQSPos: 33 RnkDlySeqPassMax ", RnkDlySeqPassMax, 4); + + if(RnkDlySeqPassMax == 0) { + Errors |= SB_NODQSPOS; // no passing window + } + else { + print_debug_dqs("\t\t\t\tTrainDQSPos: 34 RnkDlyFilterMax ", RnkDlyFilterMax, 4); + print_debug_dqs("\t\t\t\tTrainDQSPos: 34 RnkDlyFilterMin ", RnkDlyFilterMin, 4); + if((RnkDlyFilterMax - RnkDlyFilterMin)< MIN_DQS_WNDW){ + Errors |= SB_SMALLDQS; + } + else { + unsigned middle_dqs; + middle_dqs = MiddleDQS(RnkDlyFilterMin, RnkDlyFilterMax); + print_debug_dqs("\t\t\t\tTrainDQSPos: 35 middle_dqs ",middle_dqs, 4); + SetDQSDelayCSR(ctrl, channel, ByteLane, Direction, middle_dqs); + save_dqs_delay(channel, ByteLane, Direction, dqs_delay_a, middle_dqs); + } + } + + } + + print_debug_dqs("\t\t\tTrainDQSPos: end", 0xff, 3); + + return Errors; + + +} + +static unsigned TrainReadDQS(const struct mem_controller *ctrl, unsigned channel, unsigned pattern, uint8_t *buf_a, uint8_t *dqs_delay_a, struct sys_info *sysinfo) +{ + print_debug_dqs("\t\tTrainReadPos", 0, 2); + return TrainDQSPos(ctrl, channel, DQS_READDIR, pattern, buf_a, dqs_delay_a, sysinfo); +} + +static unsigned TrainWriteDQS(const struct mem_controller *ctrl, unsigned channel, unsigned pattern, uint8_t *buf_a, uint8_t *dqs_delay_a, struct sys_info *sysinfo) +{ + print_debug_dqs("\t\tTrainWritePos", 0, 2); + return TrainDQSPos(ctrl, channel, DQS_WRITEDIR, pattern, buf_a, dqs_delay_a, sysinfo); +} + + + +static unsigned TrainDQSRdWrPos(const struct mem_controller *ctrl, struct sys_info *sysinfo) +{ + const static uint32_t TestPatternJD1a[] = { + 0x00000000,0x00000000,0xFFFFFFFF,0xFFFFFFFF, // QW0-1, ALL-EVEN + 0x00000000,0x00000000,0x00000000,0x00000000, // QW2-3, ALL-EVEN + 0x00000000,0x00000000,0xFFFFFFFF,0xFFFFFFFF, // QW4-5, ALL-EVEN + 0x00000000,0x00000000,0x00000000,0x00000000, // QW6-7, ALL-EVEN + 0xFeFeFeFe,0xFeFeFeFe,0x01010101,0x01010101, // QW0-1, DQ0-ODD + 0xFeFeFeFe,0xFeFeFeFe,0x01010101,0x01010101, // QW2-3, DQ0-ODD + 0x01010101,0x01010101,0xFeFeFeFe,0xFeFeFeFe, // QW4-5, DQ0-ODD + 0xFeFeFeFe,0xFeFeFeFe,0x01010101,0x01010101, // QW6-7, DQ0-ODD + 0x02020202,0x02020202,0x02020202,0x02020202, // QW0-1, DQ1-ODD + 0xFdFdFdFd,0xFdFdFdFd,0xFdFdFdFd,0xFdFdFdFd, // QW2-3, DQ1-ODD + 0xFdFdFdFd,0xFdFdFdFd,0x02020202,0x02020202, // QW4-5, DQ1-ODD + 0x02020202,0x02020202,0x02020202,0x02020202, // QW6-7, DQ1-ODD + 0x04040404,0x04040404,0xfBfBfBfB,0xfBfBfBfB, // QW0-1, DQ2-ODD + 0x04040404,0x04040404,0x04040404,0x04040404, // QW2-3, DQ2-ODD + 0xfBfBfBfB,0xfBfBfBfB,0xfBfBfBfB,0xfBfBfBfB, // QW4-5, DQ2-ODD + 0xfBfBfBfB,0xfBfBfBfB,0xfBfBfBfB,0xfBfBfBfB, // QW6-7, DQ2-ODD + 0x08080808,0x08080808,0xF7F7F7F7,0xF7F7F7F7, // QW0-1, DQ3-ODD + 0x08080808,0x08080808,0x08080808,0x08080808, // QW2-3, DQ3-ODD + 0xF7F7F7F7,0xF7F7F7F7,0x08080808,0x08080808, // QW4-5, DQ3-ODD + 0xF7F7F7F7,0xF7F7F7F7,0xF7F7F7F7,0xF7F7F7F7, // QW6-7, DQ3-ODD + 0x10101010,0x10101010,0x10101010,0x10101010, // QW0-1, DQ4-ODD + 0xeFeFeFeF,0xeFeFeFeF,0x10101010,0x10101010, // QW2-3, DQ4-ODD + 0xeFeFeFeF,0xeFeFeFeF,0xeFeFeFeF,0xeFeFeFeF, // QW4-5, DQ4-ODD + 0xeFeFeFeF,0xeFeFeFeF,0x10101010,0x10101010, // QW6-7, DQ4-ODD + 0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF, // QW0-1, DQ5-ODD + 0xdFdFdFdF,0xdFdFdFdF,0x20202020,0x20202020, // QW2-3, DQ5-ODD + 0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF, // QW4-5, DQ5-ODD + 0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF, // QW6-7, DQ5-ODD + 0xBfBfBfBf,0xBfBfBfBf,0xBfBfBfBf,0xBfBfBfBf, // QW0-1, DQ6-ODD + 0x40404040,0x40404040,0xBfBfBfBf,0xBfBfBfBf, // QW2-3, DQ6-ODD + 0x40404040,0x40404040,0xBfBfBfBf,0xBfBfBfBf, // QW4-5, DQ6-ODD + 0x40404040,0x40404040,0xBfBfBfBf,0xBfBfBfBf, // QW6-7, DQ6-ODD + 0x80808080,0x80808080,0x7F7F7F7F,0x7F7F7F7F, // QW0-1, DQ7-ODD + 0x80808080,0x80808080,0x7F7F7F7F,0x7F7F7F7F, // QW2-3, DQ7-ODD + 0x80808080,0x80808080,0x7F7F7F7F,0x7F7F7F7F, // QW4-5, DQ7-ODD + 0x80808080,0x80808080,0x80808080,0x80808080 // QW6-7, DQ7-ODD + }; + const static uint32_t TestPatternJD1b[] = { + 0x00000000,0x00000000,0x00000000,0x00000000, // QW0,CHA-B, ALL-EVEN + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, // QW1,CHA-B, ALL-EVEN + 0x00000000,0x00000000,0x00000000,0x00000000, // QW2,CHA-B, ALL-EVEN + 0x00000000,0x00000000,0x00000000,0x00000000, // QW3,CHA-B, ALL-EVEN + 0x00000000,0x00000000,0x00000000,0x00000000, // QW4,CHA-B, ALL-EVEN + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, // QW5,CHA-B, ALL-EVEN + 0x00000000,0x00000000,0x00000000,0x00000000, // QW6,CHA-B, ALL-EVEN + 0x00000000,0x00000000,0x00000000,0x00000000, // QW7,CHA-B, ALL-EVEN + 0xFeFeFeFe,0xFeFeFeFe,0xFeFeFeFe,0xFeFeFeFe, // QW0,CHA-B, DQ0-ODD + 0x01010101,0x01010101,0x01010101,0x01010101, // QW1,CHA-B, DQ0-ODD + 0xFeFeFeFe,0xFeFeFeFe,0xFeFeFeFe,0xFeFeFeFe, // QW2,CHA-B, DQ0-ODD + 0x01010101,0x01010101,0x01010101,0x01010101, // QW3,CHA-B, DQ0-ODD + 0x01010101,0x01010101,0x01010101,0x01010101, // QW4,CHA-B, DQ0-ODD + 0xFeFeFeFe,0xFeFeFeFe,0xFeFeFeFe,0xFeFeFeFe, // QW5,CHA-B, DQ0-ODD + 0xFeFeFeFe,0xFeFeFeFe,0xFeFeFeFe,0xFeFeFeFe, // QW6,CHA-B, DQ0-ODD + 0x01010101,0x01010101,0x01010101,0x01010101, // QW7,CHA-B, DQ0-ODD + 0x02020202,0x02020202,0x02020202,0x02020202, // QW0,CHA-B, DQ1-ODD + 0x02020202,0x02020202,0x02020202,0x02020202, // QW1,CHA-B, DQ1-ODD + 0xFdFdFdFd,0xFdFdFdFd,0xFdFdFdFd,0xFdFdFdFd, // QW2,CHA-B, DQ1-ODD + 0xFdFdFdFd,0xFdFdFdFd,0xFdFdFdFd,0xFdFdFdFd, // QW3,CHA-B, DQ1-ODD + 0xFdFdFdFd,0xFdFdFdFd,0xFdFdFdFd,0xFdFdFdFd, // QW4,CHA-B, DQ1-ODD + 0x02020202,0x02020202,0x02020202,0x02020202, // QW5,CHA-B, DQ1-ODD + 0x02020202,0x02020202,0x02020202,0x02020202, // QW6,CHA-B, DQ1-ODD + 0x02020202,0x02020202,0x02020202,0x02020202, // QW7,CHA-B, DQ1-ODD + 0x04040404,0x04040404,0x04040404,0x04040404, // QW0,CHA-B, DQ2-ODD + 0xfBfBfBfB,0xfBfBfBfB,0xfBfBfBfB,0xfBfBfBfB, // QW1,CHA-B, DQ2-ODD + 0x04040404,0x04040404,0x04040404,0x04040404, // QW2,CHA-B, DQ2-ODD + 0x04040404,0x04040404,0x04040404,0x04040404, // QW3,CHA-B, DQ2-ODD + 0xfBfBfBfB,0xfBfBfBfB,0xfBfBfBfB,0xfBfBfBfB, // QW4,CHA-B, DQ2-ODD + 0xfBfBfBfB,0xfBfBfBfB,0xfBfBfBfB,0xfBfBfBfB, // QW5,CHA-B, DQ2-ODD + 0xfBfBfBfB,0xfBfBfBfB,0xfBfBfBfB,0xfBfBfBfB, // QW6,CHA-B, DQ2-ODD + 0xfBfBfBfB,0xfBfBfBfB,0xfBfBfBfB,0xfBfBfBfB, // QW7,CHA-B, DQ2-ODD + 0x08080808,0x08080808,0x08080808,0x08080808, // QW0,CHA-B, DQ3-ODD + 0xF7F7F7F7,0xF7F7F7F7,0xF7F7F7F7,0xF7F7F7F7, // QW1,CHA-B, DQ3-ODD + 0x08080808,0x08080808,0x08080808,0x08080808, // QW2,CHA-B, DQ3-ODD + 0x08080808,0x08080808,0x08080808,0x08080808, // QW3,CHA-B, DQ3-ODD + 0xF7F7F7F7,0xF7F7F7F7,0xF7F7F7F7,0xF7F7F7F7, // QW4,CHA-B, DQ3-ODD + 0x08080808,0x08080808,0x08080808,0x08080808, // QW5,CHA-B, DQ3-ODD + 0xF7F7F7F7,0xF7F7F7F7,0xF7F7F7F7,0xF7F7F7F7, // QW6,CHA-B, DQ3-ODD + 0xF7F7F7F7,0xF7F7F7F7,0xF7F7F7F7,0xF7F7F7F7, // QW7,CHA-B, DQ3-ODD + 0x10101010,0x10101010,0x10101010,0x10101010, // QW0,CHA-B, DQ4-ODD + 0x10101010,0x10101010,0x10101010,0x10101010, // QW1,CHA-B, DQ4-ODD + 0xeFeFeFeF,0xeFeFeFeF,0xeFeFeFeF,0xeFeFeFeF, // QW2,CHA-B, DQ4-ODD + 0x10101010,0x10101010,0x10101010,0x10101010, // QW3,CHA-B, DQ4-ODD + 0xeFeFeFeF,0xeFeFeFeF,0xeFeFeFeF,0xeFeFeFeF, // QW4,CHA-B, DQ4-ODD + 0xeFeFeFeF,0xeFeFeFeF,0xeFeFeFeF,0xeFeFeFeF, // QW5,CHA-B, DQ4-ODD + 0xeFeFeFeF,0xeFeFeFeF,0xeFeFeFeF,0xeFeFeFeF, // QW6,CHA-B, DQ4-ODD + 0x10101010,0x10101010,0x10101010,0x10101010, // QW7,CHA-B, DQ4-ODD + 0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF, // QW0,CHA-B, DQ5-ODD + 0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF, // QW1,CHA-B, DQ5-ODD + 0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF, // QW2,CHA-B, DQ5-ODD + 0x20202020,0x20202020,0x20202020,0x20202020, // QW3,CHA-B, DQ5-ODD + 0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF, // QW4,CHA-B, DQ5-ODD + 0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF, // QW5,CHA-B, DQ5-ODD + 0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF, // QW6,CHA-B, DQ5-ODD + 0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF,0xdFdFdFdF, // QW7,CHA-B, DQ5-ODD + 0xBfBfBfBf,0xBfBfBfBf,0xBfBfBfBf,0xBfBfBfBf, // QW0,CHA-B, DQ6-ODD + 0xBfBfBfBf,0xBfBfBfBf,0xBfBfBfBf,0xBfBfBfBf, // QW1,CHA-B, DQ6-ODD + 0x40404040,0x40404040,0x40404040,0x40404040, // QW2,CHA-B, DQ6-ODD + 0xBfBfBfBf,0xBfBfBfBf,0xBfBfBfBf,0xBfBfBfBf, // QW3,CHA-B, DQ6-ODD + 0x40404040,0x40404040,0x40404040,0x40404040, // QW4,CHA-B, DQ6-ODD + 0xBfBfBfBf,0xBfBfBfBf,0xBfBfBfBf,0xBfBfBfBf, // QW5,CHA-B, DQ6-ODD + 0x40404040,0x40404040,0x40404040,0x40404040, // QW6,CHA-B, DQ6-ODD + 0xBfBfBfBf,0xBfBfBfBf,0xBfBfBfBf,0xBfBfBfBf, // QW7,CHA-B, DQ6-ODD + 0x80808080,0x80808080,0x80808080,0x80808080, // QW0,CHA-B, DQ7-ODD + 0x7F7F7F7F,0x7F7F7F7F,0x7F7F7F7F,0x7F7F7F7F, // QW1,CHA-B, DQ7-ODD + 0x80808080,0x80808080,0x80808080,0x80808080, // QW2,CHA-B, DQ7-ODD + 0x7F7F7F7F,0x7F7F7F7F,0x7F7F7F7F,0x7F7F7F7F, // QW3,CHA-B, DQ7-ODD + 0x80808080,0x80808080,0x80808080,0x80808080, // QW4,CHA-B, DQ7-ODD + 0x7F7F7F7F,0x7F7F7F7F,0x7F7F7F7F,0x7F7F7F7F, // QW5,CHA-B, DQ7-ODD + 0x80808080,0x80808080,0x80808080,0x80808080, // QW6,CHA-B, DQ7-ODD + 0x80808080,0x80808080,0x80808080,0x80808080 // QW7,CHA-B, DQ7-ODD + }; + uint8_t pattern_buf_x[64 * 18 + 16]; // We need to two cache line So have more 16 bytes to keep 16 byte alignment */ + uint8_t *buf_a; + + unsigned pattern; + uint32_t dword; + uint32_t ecc_bit; + unsigned Errors; + unsigned channel; + int i; + unsigned DQSWrDelay; + unsigned is_Width128 = sysinfo->meminfo[ctrl->node_id].is_Width128; + uint8_t *dqs_delay_a = &sysinfo->dqs_delay_a[ctrl->node_id * 2*2*9]; //channel 2, direction 2 , bytelane *9 + + //enable SSE2 + enable_sse2(); + + //wrap32dis + set_wrap32dis(); + + //disable ECC temp + dword = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + ecc_bit = dword & DCL_DimmEccEn; + dword &= ~(DCL_DimmEccEn); + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dword); + + //SetupDqsPattern + buf_a = (uint8_t *)(((uint32_t)(&pattern_buf_x[0]) + 0x10) & (~0xf)); + + if(is_Width128){ + pattern = 1; + for(i=0;i<16*18;i++) { + *((uint32_t *)(buf_a + i*4)) = TestPatternJD1b[i]; + } + } + else { + pattern = 0; + for(i=0; i<16*9;i++) { + *((uint32_t *)(buf_a + i*4)) = TestPatternJD1a[i]; + } + + } + + print_debug_dqs("\r\nTrainDQSRdWrPos: 0 ctrl ", ctrl->node_id, 0); + + print_debug_addr("TrainDQSRdWrPos: buf_a:", buf_a); + + Errors = 0; + + channel = 0; + while( (channel<2) && (!Errors)) { + print_debug_dqs("\tTrainDQSRdWrPos: 1 channel ",channel, 1); + for(DQSWrDelay = 0; DQSWrDelay < 48; DQSWrDelay++) { + unsigned err; + SetDQSDelayAllCSR(ctrl, channel, DQS_WRITEDIR, DQSWrDelay); + print_debug_dqs("\t\tTrainDQSRdWrPos: 21 DQSWrDelay ", DQSWrDelay, 2); + err= TrainReadDQS(ctrl, channel, pattern, buf_a, dqs_delay_a, sysinfo); + print_debug_dqs("\t\tTrainDQSRdWrPos: 22 err ",err, 2); + if(err == 0) break; + Errors |= err; + } + + print_debug_dqs("\tTrainDQSRdWrPos: 3 DQSWrDelay ", DQSWrDelay, 1); + + if(DQSWrDelay < 48) { + Errors = TrainWriteDQS(ctrl, channel, pattern, buf_a, dqs_delay_a, sysinfo); + print_debug_dqs("\tTrainDQSRdWrPos: 4 Errors ", Errors, 1); + + } + channel++; + if(!is_Width128){ + channel++; // skip channel if 64-bit mode + } + } + + //Enable ECC again + dword = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dword &= ~(DCL_DimmEccEn); + dword |= ecc_bit; + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dword); + + //Clear wrap32dis + + clear_wrap32dis(); + + //restore SSE2 setting + disable_sse2(); + + print_debug_dqs("TrainDQSRdWrPos: ", 5, 0); + + return Errors; + +} +static inline uint8_t get_dqs_delay(unsigned channel, unsigned bytelane, unsigned direction, uint8_t *dqs_delay_a) +{ + return dqs_delay_a[channel * 2*9 + direction * 9 + bytelane]; +} + +static unsigned CalcEccDQSPos(unsigned channel,unsigned ByteLane0, unsigned ByteLane1, unsigned InterFactor, unsigned Direction, uint8_t *dqs_delay_a) +/* InterFactor: 0: 100% ByteLane 0 + 0x80: 50% between ByteLane 0 and 1 + 0xff: 99.6% ByteLane 1 and 0.4% like 0 +*/ +{ + unsigned DQSDelay0, DQSDelay1; + unsigned DQSDelay; + + DQSDelay0 = get_dqs_delay(channel, ByteLane0, Direction, dqs_delay_a); + DQSDelay1 = get_dqs_delay(channel, ByteLane1, Direction, dqs_delay_a); + + if(DQSDelay0>DQSDelay1) { + DQSDelay = DQSDelay0 - DQSDelay1; + InterFactor = 0xff - InterFactor; + } + else { + DQSDelay = DQSDelay1 - DQSDelay0; + } + + DQSDelay *= InterFactor; + + DQSDelay >>= 8; // /255 + + if(DQSDelay0>DQSDelay1) { + DQSDelay += DQSDelay1; + } + else { + DQSDelay += DQSDelay0; + } + + return DQSDelay; + +} + +static void SetEccDQSRdWrPos(const struct mem_controller *ctrl, struct sys_info *sysinfo) +{ + unsigned channel; + unsigned ByteLane; + unsigned Direction; + unsigned lane0, lane1, ratio; + unsigned dqs_delay; + + unsigned direction[] = { DQS_READDIR, DQS_WRITEDIR }; + int i; + uint8_t *dqs_delay_a = &sysinfo->dqs_delay_a[ctrl->node_id * 2*2*9]; //channel 2, direction 2 , bytelane *9 + + ByteLane = 8; + + for(channel = 0; channel < 2; channel++) { + for(i=0;i<2;i++) { + Direction = direction[i]; + lane0 = 4; lane1 = 5; ratio = 0; + dqs_delay = CalcEccDQSPos(channel, lane0, lane1, ratio, Direction, dqs_delay_a); + print_debug_dqs_pair("\t\tSetEccDQSRdWrPos: channel ", channel, Direction==DQS_READDIR? " R dqs_delay":" W dqs_delay", dqs_delay, 2); + SetDQSDelayCSR(ctrl, channel, ByteLane, Direction, dqs_delay); + save_dqs_delay(channel, ByteLane, Direction, dqs_delay_a, dqs_delay); + } + } +} + +static void train_DqsRcvrEn(const struct mem_controller *ctrl, unsigned Pass, struct sys_info *sysinfo) +{ + print_debug_dqs("\r\ntrain_DqsRcvrEn: begin ctrl ", ctrl->node_id, 0); + TrainRcvrEn(ctrl, Pass, sysinfo); + print_debug_dqs("\r\ntrain_DqsRcvrEn: end ctrl ", ctrl->node_id, 0); + +} +static void train_DqsPos(const struct mem_controller *ctrl, struct sys_info *sysinfo) +{ + print_debug_dqs("\r\ntrain_DqsPos: begin ctrl ", ctrl->node_id, 0); + if(TrainDQSRdWrPos(ctrl, sysinfo) != 0) { + print_err("\r\nDQS Training Rd Wr failed ctrl"); print_err_hex8(ctrl->node_id); print_err("\r\n"); + soft_reset(); + } + else { + SetEccDQSRdWrPos(ctrl, sysinfo); + } + print_debug_dqs("\r\ntrain_DqsPos: end ctrl ", ctrl->node_id, 0); + +} + +#if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 +static void f0_svm_workaround(int controllers, const struct mem_controller *ctrl, tsc_t *tsc0, struct sys_info *sysinfo) +{ + tsc_t tsc1[8]; + unsigned cpu_f0_f1[8]; + int i; + + print_debug_addr("dqs_timing: tsc1[8] :", tsc1); + + for(i = 0; i < controllers; i++) { + if (!sysinfo->ctrl_present[i]) + continue; + + /* Skip everything if I don't have any memory on this controller */ + if(sysinfo->meminfo[i].dimm_mask==0x00) continue; + + uint32_t dword; + + cpu_f0_f1[i] = is_cpu_pre_f2_in_bsp(i); + + if(!cpu_f0_f1[i]) continue; + + dword = pci_read_config32(ctrl[i].f2, DRAM_CTRL); + dword &= ~DC_DqsRcvEnTrain; + pci_write_config32(ctrl[i].f2, DRAM_CTRL, dword); + + dword = pci_read_config32(ctrl[i].f2, DRAM_INIT); + dword |= DI_EnDramInit; + pci_write_config32(ctrl[i].f2, DRAM_INIT, dword); + dword &= ~DI_EnDramInit; + pci_write_config32(ctrl[i].f2, DRAM_INIT, dword); + + tsc1[i] = rdtsc(); + print_debug_dqs_tsc("begin: tsc1", i, tsc1[i].hi, tsc1[i].lo, 2); + + dword = tsc1[i].lo + tsc0[i].lo; + if((dword<tsc1[i].lo) || (dword<tsc0[i].lo)) { + tsc1[i].hi++; + } + tsc1[i].lo = dword; + tsc1[i].hi+= tsc0[i].hi; + + print_debug_dqs_tsc("end : tsc1", i, tsc1[i].hi, tsc1[i].lo, 2); + + } + + for(i = 0; i < controllers; i++) { + if (!sysinfo->ctrl_present[i]) + continue; + + /* Skip everything if I don't have any memory on this controller */ + if(sysinfo->meminfo[i].dimm_mask==0x00) continue; + + if(!cpu_f0_f1[i]) continue; + + tsc_t tsc; + + do { + tsc = rdtsc(); + } while ((tsc1[i].hi>tsc.hi) || ((tsc1[i].hi==tsc.hi) && (tsc1[i].lo>tsc.lo))); + + print_debug_dqs_tsc("end : tsc ", i, tsc.hi, tsc.lo, 2); + } + +} + +#endif + + +/* setting variable mtrr, comes from linux kernel source */ +static void set_var_mtrr_dqs( + unsigned int reg, unsigned long basek, unsigned long sizek, + unsigned char type, unsigned address_bits) +{ + msr_t base, mask; + unsigned address_mask_high; + + address_mask_high = ((1u << (address_bits - 32u)) - 1u); + + base.hi = basek >> 22; + base.lo = basek << 10; + + if (sizek < 4*1024*1024) { + mask.hi = address_mask_high; + mask.lo = ~((sizek << 10) -1); + } + else { + mask.hi = address_mask_high & (~((sizek >> 22) -1)); + mask.lo = 0; + } + + if (reg >= 8) + return; + + if (sizek == 0) { + msr_t zero; + zero.lo = zero.hi = 0; + /* The invalid bit is kept in the mask, so we simply clear the + relevant mask register to disable a range. */ + wrmsr (MTRRphysMask_MSR(reg), zero); + } else { + /* Bit 32-35 of MTRRphysMask should be set to 1 */ + base.lo |= type; + mask.lo |= 0x800; + wrmsr (MTRRphysBase_MSR(reg), base); + wrmsr (MTRRphysMask_MSR(reg), mask); + } +} + + +/* fms: find most sigificant bit set, stolen from Linux Kernel Source. */ +static inline unsigned int fms(unsigned int x) +{ + int r; + + __asm__("bsrl %1,%0\n\t" + "jnz 1f\n\t" + "movl $0,%0\n" + "1:" : "=r" (r) : "g" (x)); + return r; +} + +/* fms: find least sigificant bit set */ +static inline unsigned int fls(unsigned int x) +{ + int r; + + __asm__("bsfl %1,%0\n\t" + "jnz 1f\n\t" + "movl $32,%0\n" + "1:" : "=r" (r) : "g" (x)); + return r; +} + +static unsigned int range_to_mtrr(unsigned int reg, + unsigned long range_startk, unsigned long range_sizek, + unsigned long next_range_startk, unsigned char type, unsigned address_bits) +{ + if (!range_sizek || (reg >= 8)) { + return reg; + } + while(range_sizek) { + unsigned long max_align, align; + unsigned long sizek; + /* Compute the maximum size I can make a range */ + max_align = fls(range_startk); + align = fms(range_sizek); + if (align > max_align) { + align = max_align; + } + sizek = 1 << align; +#if MEM_TRAIN_SEQ != 1 + #if CONFIG_USE_INIT == 1 + printk_debug("Setting variable MTRR %d, base: %4dMB, range: %4dMB, type %s\r\n", + reg, range_startk >>10, sizek >> 10, + (type==MTRR_TYPE_UNCACHEABLE)?"UC": + ((type==MTRR_TYPE_WRBACK)?"WB":"Other") + ); + #else + print_debug("Setting variable MTRR "); print_debug_hex8(reg); print_debug(", base: "); print_debug_hex16(range_startk>>10); + print_debug("MB, range: "); print_debug_hex16(sizek >> 10); print_debug("MB, type "); + print_debug( (type==MTRR_TYPE_UNCACHEABLE)?"UC\r\n": + ((type==MTRR_TYPE_WRBACK)?"WB\r\n":"Other\r\n") + ); + #endif +#endif + set_var_mtrr_dqs(reg++, range_startk, sizek, type, address_bits); + range_startk += sizek; + range_sizek -= sizek; + if (reg >= 8) + break; + } + return reg; +} + +static void set_top_mem_ap(unsigned tom_k, unsigned tom2_k) +{ + msr_t msr; + + /* Now set top of memory */ + msr.lo = (tom2_k & 0x003fffff) << 10; + msr.hi = (tom2_k & 0xffc00000) >> 22; + wrmsr(TOP_MEM2, msr); + + msr.lo = (tom_k & 0x003fffff) << 10; + msr.hi = (tom_k & 0xffc00000) >> 22; + wrmsr(TOP_MEM, msr); +} + +static void setup_mtrr_dqs(unsigned tom_k, unsigned tom2_k){ + unsigned reg; + msr_t msr; + +#if 0 + //still enable from cache_as_ram.inc + msr = rdmsr(SYSCFG_MSR); + msr.lo |= SYSCFG_MSR_MtrrFixDramModEn; + wrmsr(SYSCFG_MSR,msr); +#endif + + //[0,512k), [512k, 640k) + msr.hi = 0x1e1e1e1e; + msr.lo = msr.hi; + wrmsr(0x250, msr); + wrmsr(0x258, msr); + + //[1M, TOM) + reg = range_to_mtrr(2, 0, tom_k,4*1024*1024, MTRR_TYPE_WRBACK, 40); + + //[4G, TOM2) + if(tom2_k) { + //enable tom2 and type + msr = rdmsr(SYSCFG_MSR); + msr.lo |= (1<<21) | (1<<22); //MtrrTom2En and Tom2ForceMemTypeWB + wrmsr(SYSCFG_MSR, msr); + } + +} + +static void clear_mtrr_dqs(unsigned tom2_k){ + msr_t msr; + unsigned i; + + //still enable from cache_as_ram.inc + msr = rdmsr(SYSCFG_MSR); + msr.lo |= SYSCFG_MSR_MtrrFixDramModEn; + wrmsr(SYSCFG_MSR,msr); + + //[0,512k), [512k, 640k) + msr.hi = 0; + msr.lo = msr.hi; + wrmsr(0x250, msr); + wrmsr(0x258, msr); + + //[1M, TOM) + for(i=0x204;i<0x210;i++) { + wrmsr(i, msr); + } + + //[4G, TOM2) + if(tom2_k) { + //enable tom2 and type + msr = rdmsr(SYSCFG_MSR); + msr.lo &= ~((1<<21) | (1<<22)); //MtrrTom2En and Tom2ForceMemTypeWB + wrmsr(SYSCFG_MSR, msr); + } +} + +static void set_htic_bit(unsigned i, unsigned val, unsigned bit) +{ + uint32_t dword; + dword = pci_read_config32(PCI_DEV(0, 0x18+i, 0), HT_INIT_CONTROL); + dword &= ~(1<<bit); + dword |= ((val & 1) <<bit); + pci_write_config32(PCI_DEV(0, 0x18+i, 0), HT_INIT_CONTROL, dword); +} + + +static unsigned get_htic_bit(unsigned i, unsigned bit) +{ + uint32_t dword; + dword = pci_read_config32(PCI_DEV(0, 0x18+i, 0), HT_INIT_CONTROL); + dword &= (1<<bit); + return dword; +} + +static void wait_till_sysinfo_in_ram(void) +{ + while(1) { + if(get_htic_bit(0, 9)) return; + } +} + +static void set_sysinfo_in_ram(unsigned val) +{ + set_htic_bit(0, val, 9); +} + + +#if MEM_TRAIN_SEQ == 0 + + +#if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 +static void dqs_timing(int controllers, const struct mem_controller *ctrl, tsc_t *tsc0, struct sys_info *sysinfo) +#else +static void dqs_timing(int controllers, const struct mem_controller *ctrl, struct sys_info *sysinfo) +#endif +{ + int i; + + tsc_t tsc[5]; + + //need to enable mtrr, so dqs training could access the test address + setup_mtrr_dqs(sysinfo->tom_k, sysinfo->tom2_k); + + for(i = 0; i < controllers; i++) { + if (!sysinfo->ctrl_present[ i ]) + continue; + + /* Skip everything if I don't have any memory on this controller */ + if(sysinfo->meminfo[i].dimm_mask==0x00) continue; + + fill_mem_cs_sysinfo(i, ctrl+i, sysinfo); + } + + tsc[0] = rdtsc(); + for(i = 0; i < controllers; i++) { + if (!sysinfo->ctrl_present[ i ]) + continue; + + /* Skip everything if I don't have any memory on this controller */ + if(sysinfo->meminfo[i].dimm_mask==0x00) continue; + + print_debug("DQS Training:RcvrEn:Pass1: "); + print_debug_hex8(i); + train_DqsRcvrEn(ctrl+i, 1, sysinfo); + print_debug(" done\r\n"); + } + + tsc[1] = rdtsc(); +#if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 + f0_svm_workaround(controllers, ctrl, tsc0, sysinfo); +#endif + + tsc[2] = rdtsc(); + for(i = 0; i < controllers; i++) { + if (!sysinfo->ctrl_present[i]) + continue; + + /* Skip everything if I don't have any memory on this controller */ + if(sysinfo->meminfo[i].dimm_mask==0x00) continue; + + print_debug("DQS Training:DQSPos: "); + print_debug_hex8(i); + train_DqsPos(ctrl+i, sysinfo); + print_debug(" done\r\n"); + } + + tsc[3] = rdtsc(); + for(i = 0; i < controllers; i++) { + if (!sysinfo->ctrl_present[i]) + continue; + + /* Skip everything if I don't have any memory on this controller */ + if(sysinfo->meminfo[i].dimm_mask==0x00) continue; + + print_debug("DQS Training:RcvrEn:Pass2: "); + print_debug_hex8(i); + train_DqsRcvrEn(ctrl+i, 2, sysinfo); + print_debug(" done\r\n"); + sysinfo->mem_trained[i]=1; + } + + tsc[4] = rdtsc(); + clear_mtrr_dqs(sysinfo->tom2_k); + + + for(i=0;i<5;i++) { + print_debug_dqs_tsc_x("DQS Training:tsc", i, tsc[i].hi, tsc[i].lo); + } + + + +} + +#endif + + +#if MEM_TRAIN_SEQ > 0 + +static void dqs_timing(int i, const struct mem_controller *ctrl, struct sys_info *sysinfo, unsigned v) +{ + + int ii; + + tsc_t tsc[4]; + + +#if MEM_TRAIN_SEQ == 1 + if(sysinfo->mem_trained[i]) return; + //need to enable mtrr, so dqs training could access the test address + setup_mtrr_dqs(sysinfo->tom_k, sysinfo->tom2_k); +#endif + + fill_mem_cs_sysinfo(i, ctrl+i, sysinfo); + + if(v) { + tsc[0] = rdtsc(); + + print_debug("set DQS timing:RcvrEn:Pass1: "); + print_debug_hex8(i); + } + train_DqsRcvrEn(ctrl+i, 1, sysinfo); + + if(v) { + print_debug(" done\r\n"); + tsc[1] = rdtsc(); + print_debug("set DQS timing:DQSPos: "); + print_debug_hex8(i); + } + + train_DqsPos(ctrl+i, sysinfo); + + if(v) { + print_debug(" done\r\n"); + tsc[2] = rdtsc(); + + print_debug("set DQS timing:RcvrEn:Pass2: "); + print_debug_hex8(i); + } + train_DqsRcvrEn(ctrl+i, 2, sysinfo); + + if(v) { + print_debug(" done\r\n"); + + tsc[3] = rdtsc(); + } + +#if MEM_TRAIN_SEQ == 1 + clear_mtrr_dqs(sysinfo->tom2_k); +#endif + + if(v) { + for(ii=0;ii<4;ii++) { + print_debug_dqs_tsc_x("Total DQS Training : tsc ", ii, tsc[ii].hi, tsc[ii].lo); + } + } + + sysinfo->mem_trained[i]=1; + +} +#endif + +#if MEM_TRAIN_SEQ == 1 +static void train_ram(unsigned nodeid, struct sys_info *sysinfo, struct sys_info *sysinfox) +{ + dqs_timing(nodeid, sysinfo->ctrl,sysinfo, 0); // keep the output tidy +// memcpy(&sysinfox->dqs_rcvr_dly_a[nodeid * 2 * 8],&sysinfo->dqs_rcvr_dly_a[nodeid * 2 * 8], 2*8); +// memcpy(&sysinfox->dqs_delay_a[nodeid * 2 * 2 * 9], &sysinfo->dqs_delay_a[nodeid * 2 * 2 * 9], 2 * 2 * 9); + sysinfox->mem_trained[nodeid] = sysinfo->mem_trained[nodeid]; + +} +static void copy_and_run_ap_code_in_car(unsigned ret_addr); +static inline void train_ram_on_node(unsigned nodeid, unsigned coreid, struct sys_info *sysinfo, unsigned retcall) +{ + if(coreid) return; // only do it on core0 + struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); + wait_till_sysinfo_in_ram(); // use pci to get it + + if(sysinfox->mem_trained[nodeid] == 0) { + if (sysinfox->ctrl_present[ nodeid ] && sysinfox->meminfo[nodeid].dimm_mask) { + sysinfo->tom_k = sysinfox->tom_k; + sysinfo->tom2_k = sysinfox->tom2_k; + sysinfo->meminfo[nodeid].is_Width128 = sysinfox->meminfo[nodeid].is_Width128; + set_top_mem_ap(sysinfo->tom_k, sysinfo->tom2_k); // keep the ap's tom consistent with bsp's + #if CONFIG_AP_CODE_IN_CAR == 0 + print_debug("CODE IN ROM AND RUN ON NODE:"); print_debug_hex8(nodeid); print_debug("\r\n"); + train_ram(nodeid, sysinfo, sysinfox); + #else + /* Can copy dqs_timing to ap cache and run from cache? + * we need linuxbios_ap_car.rom? and treat it as linuxbios_ram.rom for ap ? + */ + copy_and_run_ap_code_in_car(retcall); + // will go back by jump + #endif + } + } +} +#endif
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/setup_resource_map.c =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/setup_resource_map.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/setup_resource_map.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -21,8 +21,8 @@ print_debug("\r\n"); #endif #endif - dev = (register_values[i] & ~0xff) + offset_pci_dev; - where = register_values[i] & 0xff; + dev = (register_values[i] & ~0xfff) + offset_pci_dev; + where = register_values[i] & 0xfff; reg = pci_read_config32(dev, where); reg &= register_values[i+1]; reg |= register_values[i+2] + offset_io_base; @@ -58,13 +58,13 @@ #if RES_DEBUG #if CONFIG_USE_INIT printk_debug("%04x: %02x %08x <- & %08x | %08x\r\n", - i/4, register_values[i], + i>>2, register_values[i], register_values[i+1] + ( (register_values[i]==RES_PCI_IO) ? offset_pci_dev : 0), register_values[i+2], register_values[i+3] + ( ( (register_values[i] & RES_PORT_IO_32) == RES_PORT_IO_32) ? offset_io_base : 0) ); #else - print_debug_hex16(i/4); + print_debug_hex16(i>>2); print_debug(": "); print_debug_hex8(register_values[i]); print_debug(" "); @@ -84,8 +84,8 @@ device_t dev; unsigned where; unsigned long reg; - dev = (register_values[i+1] & ~0xff) + offset_pci_dev; - where = register_values[i+1] & 0xff; + dev = (register_values[i+1] & ~0xfff) + offset_pci_dev; + where = register_values[i+1] & 0xfff; reg = pci_read_config32(dev, where); reg &= register_values[i+2]; reg |= register_values[i+3]; @@ -173,8 +173,8 @@ device_t dev; unsigned where; unsigned long reg; - dev = register_values[i+1] & ~0xff; - where = register_values[i+1] & 0xff; + dev = register_values[i+1] & ~0xfff; + where = register_values[i+1] & 0xfff; reg = pci_read_config32(dev, where); reg &= register_values[i+2]; reg |= register_values[i+3];
Added: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/spd_ddr2.h =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/spd_ddr2.h (rev 0) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/spd_ddr2.h 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,66 @@ +/* SPDs for DDR2 SDRAM */ +#define SPD_MEM_TYPE 2 + #define SPD_MEM_TYPE_SDRAM_DDR 0x07 + #define SPD_MEM_TYPE_SDRAM_DDR2 0x08 + +#define SPD_DIMM_TYPE 20 /* x bit0 or bit4 =1 mean registered*/ + #define SPD_DIMM_TYPE_RDIMM (1<<0) + #define SPD_DIMM_TYPE_UDIMM (1<<1) + #define SPD_DIMM_TYPE_SODIMM (1<<2) + #define SPD_DIMM_TYPE_uDIMM (1<<3) + #define SPD_DIMM_TYPE_mRDIMM (1<<4) + #define SPD_DIMM_TYPE_mUDIMM (1<<5) +#define SPD_MOD_ATTRIB 21 + #define SPD_MOD_ATTRIB_DIFCK 0x20 + #define SPD_MOD_ATTRIB_REGADC 0x11 /* x */ + #define SPD_MOD_ATTRIB_PROBE 0x40 + +#define SPD_DEV_ATTRIB 22 /* Device attributes --- general */ +#define SPD_DIMM_CONF_TYPE 11 + #define SPD_DIMM_CONF_TYPE_ECC 0x02 + #define SPD_DIMM_CONF_TYPE_ADDR_PARITY 0x04 /* ? */ + +#define SPD_ROW_NUM 3 /* Number of Row addresses */ +#define SPD_COL_NUM 4 /* Number of Column addresses */ +#define SPD_BANK_NUM 17 /* SDRAM Device attributes - Number of Banks on SDRAM device, it could be 0x4, 0x8, so address lines for that would be 2, and 3 */ + +#define SPD_MOD_ATTRIB_RANK 5 /* include Number of Ranks bit [2:0], Package (bit4, 1=stack, 0=planr), Height bit[7:5] */ + #define SPD_MOD_ATTRIB_RANK_NUM_SHIFT 0 + #define SPD_MOD_ATTRIB_RANK_NUM_MASK 0x07 + #define SPD_MOD_ATTRIB_RANK_NUM_BASE 1 + #define SPD_MOD_ATTRIB_RANK_NUM_MIN 1 + #define SPD_MOD_ATTRIB_RANK_NUM_MAX 8 + +#define SPD_RANK_SIZE 31 /* Only one bit is set */ + #define SPD_RANK_SIZE_1GB (1<<0) + #define SPD_RANK_SIZE_2GB (1<<1) + #define SPD_RANK_SIZE_4GB (1<<2) + #define SPD_RANK_SIZE_8GB (1<<3) + #define SPD_RANK_SIZE_16GB (1<<4) + #define SPD_RANK_SIZE_128MB (1<<5) + #define SPD_RANK_SIZE_256MB (1<<6) + #define SPD_RANK_SIZE_512MB (1<<7) + +#define SPD_DATA_WIDTH 6 /* valid value 0, 32, 33, 36, 64, 72, 80, 128, 144, 254, 255 */ +#define SPD_PRI_WIDTH 13 /* Primary SDRAM Width, it could be 0x08 or 0x10 */ +#define SPD_ERR_WIDTH 14 /* Error Checking SDRAM Width, it could be 0x08 or 0x10 */ + +#define SPD_CAS_LAT 18 /* SDRAM Device Attributes -- CAS Latency */ + #define SPD_CAS_LAT_2 (1<<2) + #define SPD_CAS_LAT_3 (1<<3) + #define SPD_CAS_LAT_4 (1<<4) + #define SPD_CAS_LAT_5 (1<<5) + #define SPD_CAS_LAT_6 (1<<6) + +#define SPD_TRP 27 /* bit [7:2] = 1-63 ns, bit [1:0] 0.25ns+, final value ((val>>2) + (val & 3) * 0.25)ns */ +#define SPD_TRRD 28 +#define SPD_TRCD 29 +#define SPD_TRAS 30 +#define SPD_TWR 36 /* x */ +#define SPD_TWTR 37 /* x */ +#define SPD_TRTP 38 /* x */ + +#define SPD_TRC 41 /* add byte 0x40 bit [3:1] , so final val41+ table[((val40>>1) & 0x7)] ... table[]={0, 0.25, 0.33, 0.5, 0.75, 0, 0}*/ +#define SPD_TRFC 42 /* add byte 0x40 bit [6:4] , so final val42+ table[((val40>>4) & 0x7)] + (val40 & 1)*256*/ + +#define SPD_TREF 12
Added: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/ssdt.dsl =================================================================== --- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/ssdt.dsl (rev 0) +++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/ssdt.dsl 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,78 @@ +/* + * Copyright 2005 AMD + */ +DefinitionBlock ("SSDT.aml", "SSDT", 1, "AMD-K8", "AMD-ACPI", 100925440) +{ + /* + * These objects were referenced but not defined in this table + */ + External (_SB_.PCI0, DeviceObj) + + Scope (_SB.PCI0) + { + Name (BUSN, Package (0x04) + { + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444 + }) + Name (MMIO, Package (0x10) + { + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0xbbbbbbbb, + 0xcccccccc, + 0xdddddddd, + 0xeeeeeeee, + 0x11111111, + 0x22222222 + }) + Name (PCIO, Package (0x08) + { + 0x77777777, + 0x88888888, + 0x99999999, + 0xaaaaaaaa, + 0xbbbbbbbb, + 0xcccccccc, + 0xdddddddd, + 0xeeeeeeee + }) + Name (SBLK, 0x11) + Name (TOM1, 0xaaaaaaaa) + Name (SBDN, 0xbbbbbbbb) + Name (HCLK, Package (0x08) + { + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888 + }) + Name (HCDN, Package (0x08) + { + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + 0x55555555, + 0x66666666, + 0x77777777, + 0x88888888 + }) + Name (CBST, 0x88) + } +} +
Modified: trunk/LinuxBIOSv2/src/southbridge/amd/amd8111/amd8111_early_ctrl.c =================================================================== --- trunk/LinuxBIOSv2/src/southbridge/amd/amd8111/amd8111_early_ctrl.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/southbridge/amd/amd8111/amd8111_early_ctrl.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -10,7 +10,7 @@ PCI_ID(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_PCI), bus);
- return (dev>>11) & 0x1f; + return (dev>>15) & 0x1f;
}
Modified: trunk/LinuxBIOSv2/src/southbridge/amd/amd8111/amd8111_enable_rom.c =================================================================== --- trunk/LinuxBIOSv2/src/southbridge/amd/amd8111/amd8111_enable_rom.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/southbridge/amd/amd8111/amd8111_enable_rom.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -6,10 +6,10 @@
/* Enable 5MB rom access at 0xFFB00000 - 0xFFFFFFFF */ /* Locate the amd8111 */ - dev = pci_locate_device(PCI_ID(0x1022, 0x7468), 0); + dev = pci_io_locate_device(PCI_ID(0x1022, 0x7468), 0);
/* Set the 5MB enable bits */ - byte = pci_read_config8(dev, 0x43); + byte = pci_io_read_config8(dev, 0x43); byte |= 0xC0; - pci_write_config8(dev, 0x43, byte); + pci_io_write_config8(dev, 0x43, byte); }
Modified: trunk/LinuxBIOSv2/src/southbridge/amd/amd8111/amd8111_reset.c =================================================================== --- trunk/LinuxBIOSv2/src/southbridge/amd/amd8111/amd8111_reset.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/southbridge/amd/amd8111/amd8111_reset.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -2,9 +2,9 @@ #include <device/pci_ids.h>
#define PCI_DEV(BUS, DEV, FN) ( \ - (((BUS) & 0xFF) << 16) | \ - (((DEV) & 0x1f) << 11) | \ - (((FN) & 0x7) << 8)) + (((BUS) & 0xFFF) << 20) | \ + (((DEV) & 0x1F) << 15) | \ + (((FN) & 0x7) << 12))
#define PCI_ID(VENDOR_ID, DEVICE_ID) \ ((((DEVICE_ID) & 0xFFFF) << 16) | ((VENDOR_ID) & 0xFFFF)) @@ -14,7 +14,7 @@ static void pci_write_config8(device_t dev, unsigned where, unsigned char value) { unsigned addr; - addr = dev | where; + addr = (dev>>4) | where; outl(0x80000000 | (addr & ~3), 0xCF8); outb(value, 0xCFC + (addr & 3)); } @@ -22,7 +22,7 @@ static void pci_write_config32(device_t dev, unsigned where, unsigned value) { unsigned addr; - addr = dev | where; + addr = (dev>>4) | where; outl(0x80000000 | (addr & ~3), 0xCF8); outl(value, 0xCFC); } @@ -30,7 +30,7 @@ static unsigned pci_read_config32(device_t dev, unsigned where) { unsigned addr; - addr = dev | where; + addr = (dev>>4) | where; outl(0x80000000 | (addr & ~3), 0xCF8); return inl(0xCFC); } @@ -58,8 +58,8 @@ { device_t dev; unsigned bus; - unsigned node = 0; - unsigned link = get_sblk(); + unsigned node = 0; + unsigned link = get_sblk();
/* Find the device. * There can only be one 8111 on a hypertransport chain/bus.
Modified: trunk/LinuxBIOSv2/src/southbridge/broadcom/bcm5785/bcm5785_early_setup.c =================================================================== --- trunk/LinuxBIOSv2/src/southbridge/broadcom/bcm5785/bcm5785_early_setup.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/southbridge/broadcom/bcm5785/bcm5785_early_setup.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -71,6 +71,48 @@ pci_write_config8(dev, 0x40, (1<<2)); }
+static unsigned get_sbdn(unsigned bus) +{ + device_t dev; + + /* Find the device. + * There can only be one 8111 on a hypertransport chain/bus. + */ + dev = pci_locate_device_on_bus( + PCI_ID(0x1166, 0x0036), + bus); + + return (dev>>15) & 0x1f; + +} + +#define SB_VFSMAF 0 + +static void enable_fid_change_on_sb(unsigned sbbusn, unsigned sbdn) +{ + //ACPI Decode Enable + outb(0x0e, 0xcd6); + outb((1<<3), 0xcd7); + + // set port to 0x2060 + outb(0x67, 0xcd6); + outb(0x60, 0xcd7); + outb(0x68, 0xcd6); + outb(0x20, 0xcd7); + + outb(0x69, 0xcd6); + outb(7, 0xcd7); + + outb(0x64, 0xcd6); + outb(9, 0xcd7); +} + +static void ldtstop_sb(void) +{ + outb(1, 0x2060); +} + + static void hard_reset(void) { bcm5785_enable_wdt_port_cf9();
Modified: trunk/LinuxBIOSv2/src/southbridge/nvidia/ck804/ck804_early_setup.c =================================================================== --- trunk/LinuxBIOSv2/src/southbridge/nvidia/ck804/ck804_early_setup.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/southbridge/nvidia/ck804/ck804_early_setup.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -2,58 +2,13 @@ * Copyright 2004 Tyan Computer * by yhlu@tyan.com */ -static int set_ht_link_buffer_count(uint8_t node, uint8_t linkn, uint8_t linkt, unsigned val) -{ - uint32_t dword, dword_old; - uint8_t link_type; - - dword = pci_read_config32(PCI_DEV(0,0x18+node,0), 0x98 + (linkn * 0x20)); - link_type = dword & 0xff; - - dword_old = dword = pci_read_config32(PCI_DEV(0,0x18+node,0), 0x90 + (linkn * 0x20) ); - - if ( (link_type & 0x7) == linkt ) { - dword = val; - } - - if (dword != dword_old) { - pci_write_config32(PCI_DEV(0,0x18+node,0), 0x90 + (linkn * 0x20), dword); - return 1; - } - - return 0; -} static int set_ht_link_ck804(uint8_t ht_c_num) { - int reset_needed; - uint8_t i; - - reset_needed = 0; - - for (i = 0; i < ht_c_num; i++) { - uint32_t reg; - uint8_t nodeid, linkn; - uint8_t busn; - unsigned val; - - reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4); - if((reg & 3) != 3) continue; - - nodeid = ((reg & 0xf0)>>4); - linkn = ((reg & 0xf00)>>8); - busn = (reg & 0xff0000)>>16; - - reg = pci_read_config32( PCI_DEV(busn, 1, 0), PCI_VENDOR_ID); - if ( (reg & 0xffff) == 0x10de ) { - val = 0x01610169; - reset_needed |= set_ht_link_buffer_count(nodeid, linkn, 0x07,val); - } - } - - return reset_needed; + unsigned vendorid = 0x10de; + unsigned val = 0x01610169; + set_ht_link_buffer_counts_chain(ht_c_num, vendorid, val); }
- static void setup_ss_table(unsigned index, unsigned where, unsigned control, const unsigned int *register_values, int max) { int i;
Modified: trunk/LinuxBIOSv2/src/southbridge/nvidia/ck804/ck804_early_setup_car.c =================================================================== --- trunk/LinuxBIOSv2/src/southbridge/nvidia/ck804/ck804_early_setup_car.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/southbridge/nvidia/ck804/ck804_early_setup_car.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -3,59 +3,14 @@ * by yhlu@tyan.com * 2005.12 yhlu make it for car so it could support more ck804s */ -static int set_ht_link_buffer_count(uint8_t node, uint8_t linkn, uint8_t linkt, unsigned val) -{ - uint32_t dword, dword_old; - uint8_t link_type; - - /* This works on an Athlon64 because unimplemented links return 0 */ - dword = pci_read_config32(PCI_DEV(0,0x18+node,0), 0x98 + (linkn * 0x20)); - link_type = dword & 0xff; - - dword_old = dword = pci_read_config32(PCI_DEV(0,0x18+node,0), 0x90 + (linkn * 0x20) ); - - if ( (link_type & 0x7) == linkt ) { /* Coherent Link only linkt = 3, ncoherent = 7*/ - dword = val; - } - - if (dword != dword_old) { - pci_write_config32(PCI_DEV(0,0x18+node,0), 0x90 + (linkn * 0x20), dword); - return 1; - } - - return 0; -} + static int set_ht_link_ck804(uint8_t ht_c_num) { - int reset_needed; - uint8_t i; - - reset_needed = 0; - - for (i = 0; i < ht_c_num; i++) { - uint32_t reg; - uint8_t nodeid, linkn; - uint8_t busn; - unsigned val; - - reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4); - if((reg & 3) != 3) continue; - - nodeid = ((reg & 0xf0)>>4); - linkn = ((reg & 0xf00)>>8); - busn = (reg & 0xff0000)>>16; - - reg = pci_read_config32( PCI_DEV(busn, 1, 0), PCI_VENDOR_ID); - if ( (reg & 0xffff) == 0x10de ) { - val = 0x01610169; - reset_needed |= set_ht_link_buffer_count(nodeid, linkn, 0x07,val); - } - } - - return reset_needed; + unsigned vendorid = 0x10de; + unsigned val = 0x01610169; + set_ht_link_buffer_counts_chain(ht_c_num, vendorid, val); }
- static void setup_ss_table(unsigned index, unsigned where, unsigned control, const unsigned int *register_values, int max) { int i;
Modified: trunk/LinuxBIOSv2/src/stream/rom_stream.c =================================================================== --- trunk/LinuxBIOSv2/src/stream/rom_stream.c 2006-09-25 09:15:52 UTC (rev 2434) +++ trunk/LinuxBIOSv2/src/stream/rom_stream.c 2006-10-04 20:46:15 UTC (rev 2435) @@ -54,7 +54,8 @@ uncompress(uint8_t * rom_start, uint8_t *dest ) { #if (CONFIG_COMPRESSED_ROM_STREAM) || (CONFIG_COMPRESSED_ROM_STREAM_NRV2B) - return unrv2b(rom_start, dest); + unsigned long ilen; // used compressed stream length + return unrv2b(rom_start, dest, &ilen); #endif #if (CONFIG_COMPRESSED_ROM_STREAM_LZMA) return ulzma(rom_start, dest);
Added: trunk/LinuxBIOSv2/targets/amd/serengeti_cheetah/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/amd/serengeti_cheetah/Config.lb (rev 0) +++ trunk/LinuxBIOSv2/targets/amd/serengeti_cheetah/Config.lb 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1,85 @@ +# Sample config file for +# the amd serengeti_cheetah +# This will make a target directory of ./serengeti_cheetah + +target serengeti_cheetah +mainboard amd/serengeti_cheetah + +# serengeti_leopard +romimage "normal" +# 48K for SCSI FW +# option ROM_SIZE = 475136 +# 48K for SCSI FW and 48K for ATI ROM +# option ROM_SIZE = 425984 +# 64K for Etherboot +# option ROM_SIZE = 458752 + option USE_FAILOVER_IMAGE=0 + option USE_FALLBACK_IMAGE=0 +# option ROM_IMAGE_SIZE=0x13800 +# option ROM_IMAGE_SIZE=0x18800 + option ROM_IMAGE_SIZE=0x20000 +# option ROM_IMAGE_SIZE=0x15800 + option XIP_ROM_SIZE=0x40000 + option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" +# payload ../../../payloads/tg3--ide_disk.zelf +# payload ../../../payloads/filo.elf +# payload ../../../payloads/filo_mem.elf +# payload ../../../payloads/filo.zelf +# payload ../../../payloads/tg3--filo_hda2.zelf +# payload ../../../payloads/tg3.zelf +# payload ../../../../payloads/tg3_vga.zelf +# payload ../../../../payloads/tg3--filo_hda2_vga.zelf + payload ../../../../payloads/tg3--filo_hda2_vga_5.4.1.zelf +# payload ../../../../payloads/e1000_vga.zelf +# payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf +# payload ../../../payloads/tg3_com2.zelf +# payload ../../../payloads/e1000--filo.zelf +# payload ../../../payloads/tg3--e1000--filo.zelf +# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf +# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf +# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf +end + +romimage "fallback" + option USE_FAILOVER_IMAGE=0 + option USE_FALLBACK_IMAGE=1 +# option ROM_IMAGE_SIZE=0x13800 +# option ROM_IMAGE_SIZE=0x19800 + option ROM_IMAGE_SIZE=0x20000 +# option ROM_IMAGE_SIZE=0x15800 + option XIP_ROM_SIZE=0x40000 + option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback" +# payload ../../../payloads/tg3--ide_disk.zelf +# payload ../../../payloads/filo.elf +# payload ../../../payloads/filo_mem.elf +# payload ../../../payloads/filo.zelf +# payload ../../../payloads/tg3--filo_hda2.zelf +# payload ../../../payloads/tg3.zelf +# payload ../../../../payloads/tg3_vga.zelf +# payload ../../../../payloads/memtest +# payload ../../../../payloads/adlo.elf +# payload ../../../../payloads/e1000_vga.zelf +# payload ../../../../payloads/filo_hda.zelf +# payload ../../../../payloads/tg3--filo_hda2_vga.zelf +# payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf + payload ../../../../payloads/tg3--filo_hda2_vga_5.4.1.zelf +# payload ../../../../payloads/filo_hda2_novga.zelf +# payload ../../../payloads/tg3_com2.zelf +# payload ../../../payloads/e1000--filo.zelf +# payload ../../../payloads/tg3--e1000--filo.zelf +# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf +# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf +# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf +end + +romimage "failover" + option USE_FAILOVER_IMAGE=1 + option USE_FALLBACK_IMAGE=0 + option ROM_IMAGE_SIZE=FAILOVER_SIZE + option XIP_ROM_SIZE=FAILOVER_SIZE + option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover" +end + + +buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" "failover" +#buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
Added: trunk/LinuxBIOSv2/targets/amd/serengeti_cheetah/VERSION =================================================================== --- trunk/LinuxBIOSv2/targets/amd/serengeti_cheetah/VERSION (rev 0) +++ trunk/LinuxBIOSv2/targets/amd/serengeti_cheetah/VERSION 2006-10-04 20:46:15 UTC (rev 2435) @@ -0,0 +1 @@ +_serengenti_cheetah