Dear Eli,
Am Montag, den 12.02.2018, 11:55 +0100 schrieb Elisenda Cuadros:
Sure, I will be happy to do it :-)
Thank you very much for uploading the data to the board status repository [1].
I noticed, that the serial console is enabled in your run, which causes the boot time to be quite slow as all messages have to be sent over the serial cable.
Could you please do another upload with the serial console disabled? You can just use latest commit from the master branch. That data would be nice to have to keep track of possible boot time regressions.
Also, RAM initialization took 1.7 seconds according to the time stamps.
``` 2:before ram initialization 178,042 (174,580) 3:after ram initialization 1,878,897 (1,700,855) ```
If it is really that long – I didn’t see any log messages, so it’s shouldn’t be the serial console –, could you do at least two reboots to see if it’s due to an empty cache of the RAM data?
Kind regards,
Paul
[1] asus/am1i-a/4.7-294-gac05cbdea4/2018-02-12T15_31_32Z