[coreboot] Booting Geode LX processor autonomously

[llandre]

I'm working with the LPC dongle by Artec to emulate boot flash. It works 
fine when controlling the processor via JTAG. That is when we debug the 
boot code under the JTAG control everything is ok (irq13=1 to stop the 
processor boot).
When I disconnect the JTAG debugger and set irq13 to 0 to let the 
processor to boot from the LPC dongle flash, it does not boot. Do I need 
to perform other operations to let it boot autonomously?

TIA,
llandre

DAVE Electronics System House - R&D Department
web:   http://www.dave.eu
email: r&[e-mail]