Hi,
the HP XW9300 with coreboot failed. I have before flashing the coreboot.rom, a backup from the bios
OUTPUT:
sudo flashrom -w coreboot.rom flashrom v0.9.4-r1394 on Linux 3.0.0-12-generic (i686), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK. Found chipset "NVIDIA CK804". Enabling flash write... OK. WARNING: unexpected second chipset match: "NVIDIA CK804" ignoring, please report lspci and board URL to flashrom@flashrom.org with 'CHIPSET: your board name' in the subject line. This chipset supports the following protocols: Non-SPI. Found SST flash chip "SST49LF080A" (1024 kB, LPC) at physical address 0xfff00000. Note: If the following flash access fails, try -m <vendor>:<mainboard>. Reading old flash chip contents... done. Erasing and writing flash chip... ERASE FAILED at 0x00000000! Expected=0xff, Read=0x48, failed byte count from 0x00000000-0x00000fff: 0x100 ERASE FAILED! Reading current flash chip contents... done. ERASE FAILED at 0x00000000! Expected=0xff, Read=0x48, failed byte count from 0x00000000-0x0000ffff: 0x100 ERASE FAILED! FAILED! Uh oh. Erase/write failed. Checking if anything changed. Good. It seems nothing was changed. Writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at irc.freenode.net (channel #flashrom) or mail flashrom@flashrom.org! ------------------------------------------------------------------------------- You may now reboot or simply leave the machine running.
sudo flashrom -w hp.rom flashrom v0.9.4-r1394 on Linux 3.0.0-12-generic (i686), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK. Found chipset "NVIDIA CK804". Enabling flash write... OK. WARNING: unexpected second chipset match: "NVIDIA CK804" ignoring, please report lspci and board URL to flashrom@flashrom.org with 'CHIPSET: your board name' in the subject line. This chipset supports the following protocols: Non-SPI. Found SST flash chip "SST49LF080A" (1024 kB, LPC) at physical address 0xfff00000. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED.