Hi,
It sounds like you may be having a similar issue to the one I had with the KGPE-D16 a month or so ago. Currently coreboot 4.8 doesn't boot for me if "Use CMOS for configuration values" is selected when coreboot is built. Coreboot 4.6 doesn't have this issue, so it may be worth a try building that version and seeing if you have better luck.
Kind regards,
Pete
Sent with ProtonMail Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Saturday, January 12, 2019 8:48 AM, espionage724@posteo.net wrote:
I have a KCMA-D8 motherboard with two Opteron 4226s, and 6x4GB (24GB) Hynix HMT151R7BFR4C-H9 RAM sticks. All my attempts of getting Coreboot to POST with this board so far haven't worked. I'm compiling Coreboot from Git (master branch), and can build it without issue. A pre-built Libreboot ROM (20160907) POSTs and boots fine.
For Coreboot's config, I've tried including/excluding CPU microcode updates, along with some less important-sounding options. For hardware, I've tried unplugging everything external (KB/mouse), my GPU (RX 580), and only had a single RAM stick in (slot A1). I've also tried a single CPU being powered (kept the 2nd CPU in but only had a single 4-pin CPU going to the 1st CPU).
Can anyone else confirm Git builds of Coreboot booting on this board, or provide any tips as to anything I could be missing?
I see this issue https://ticket.coreboot.org/issues/151 but there's a board status months after that that looks like it boots: https://review.coreboot.org/cgit/board-status.git/tree/asus/kcma-d8/4.7-789-...
coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org