coreboot

coreboot@coreboot.org

10 participants
39711 discussions

13 May '04

Increase HEAP SIZE. YH -----邮件原件----- 发件人: Jay Miller [mailto:jmiller@actuality-systems.com] 发送时间: 2004年5月13日 12:49 收件人: YhLu; linuxbios(a)clustermatic.org 主题: RE: Making payloads I built tg3--filo.zelf with the latest patch from the link in your message. Getting the follow error message when loading: Loading Etherboot version: 5.2.4 Dropping non PT_LOAD segment New segment addr 0x20000 size 0x4aef5 offset 0xb0 filesize 0xa4b7 (cleaned up) New segment addr 0x20000 size 0x4aef5 offset 0xb0 filesize 0xa4b7 Loading Segment: addr: 0x000000001ffadfe8 memsz: 0x000000000001b00c filesz: 0x00 0000000000a4b7 Clearing Segment: addr: 0x000000001ffb849f memsz: 0x0000000000010b55 Loading Segment: addr: 0x000000000003b00c memsz: 0x000000000002fee9 filesz: 0x00 00000000000000 39:stream_skip() - overflowed source buffer ERROR: Skip of 68437 bytes skiped 23193 bytes Cannot Load ELF Image What am I doing wrong? -J -----Original Message----- From: YhLu [mailto:YhLu@tyan.com] Sent: Thursday, May 13, 2004 1:22 PM To: Jay Miller; linuxbios(a)clustermatic.org Subject: 答复: Making payloads http://sourceforge.net/tracker/index.php?func=detail&aid=943300&group_id=423 3&atid=304233 -----邮件原件----- 发件人: YhLu 发送时间: 2004年5月13日 10:05 收件人: Jay Miller; linuxbios(a)clustermatic.org 主题: 答复: Making payloads Jay, I have merged into FILO into Etherboot. You can get that patch from Etherboot group. So you can build tg3--filo.zelf. About the PCI scan in Etherboot has no problem to find IDE other than bus 0. Current it already supports serial IDE and normal IDE. I'm working on add usb boot into FILO in Etherboot. The AMD8111 is using OHCI, and I'm trying to make use steven code for USB boot, but it is only support UHCI. OHCI has hardware support for ED (QH) instead of SW QH. Maybe I need to get UHCI addon card at first. Please let me know if you has problem to get filo patch. And I would send you my tar ball about filo in Etherboot. Regards YH -----邮件原件----- 发件人: Jay Miller [mailto:jmiller@actuality-systems.com] 发送时间: 2004年5月13日 8:36 收件人: linuxbios(a)clustermatic.org 主题: Making payloads The reason why my S2885 image wasn't working is because my system only has 1 CPU populated. A little tweaking to remove the second processor and I can get FILO to come up. Unfortunately FILO does not detect the IDE disk. I noticed in the payloads section of Config.lb there are some multi-part payloads, like tg3--ide_disk.zelf, and tg3--filo.zelf. How do I create the multi-part payloads? Ideally I would be interested in a FILO that recognizes IDE. Alternatively I am also pursuing a tg3 payload that will load my kernel over the network. Thanks, Jay Miller Actuality Systems, Inc. jmiller(a)acutality-systems.com _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

1 0

RE: Making payloads
by Jay Miller 13 May '04

13 May '04

I built tg3--filo.zelf with the latest patch from the link in your message. Getting the follow error message when loading: Loading Etherboot version: 5.2.4 Dropping non PT_LOAD segment New segment addr 0x20000 size 0x4aef5 offset 0xb0 filesize 0xa4b7 (cleaned up) New segment addr 0x20000 size 0x4aef5 offset 0xb0 filesize 0xa4b7 Loading Segment: addr: 0x000000001ffadfe8 memsz: 0x000000000001b00c filesz: 0x00 0000000000a4b7 Clearing Segment: addr: 0x000000001ffb849f memsz: 0x0000000000010b55 Loading Segment: addr: 0x000000000003b00c memsz: 0x000000000002fee9 filesz: 0x00 00000000000000 39:stream_skip() - overflowed source buffer ERROR: Skip of 68437 bytes skiped 23193 bytes Cannot Load ELF Image What am I doing wrong? -J -----Original Message----- From: YhLu [mailto:YhLu@tyan.com] Sent: Thursday, May 13, 2004 1:22 PM To: Jay Miller; linuxbios(a)clustermatic.org Subject: 答复: Making payloads http://sourceforge.net/tracker/index.php?func=detail&aid=943300&group_id=423 3&atid=304233 -----邮件原件----- 发件人: YhLu 发送时间: 2004年5月13日 10:05 收件人: Jay Miller; linuxbios(a)clustermatic.org 主题: 答复: Making payloads Jay, I have merged into FILO into Etherboot. You can get that patch from Etherboot group. So you can build tg3--filo.zelf. About the PCI scan in Etherboot has no problem to find IDE other than bus 0. Current it already supports serial IDE and normal IDE. I'm working on add usb boot into FILO in Etherboot. The AMD8111 is using OHCI, and I'm trying to make use steven code for USB boot, but it is only support UHCI. OHCI has hardware support for ED (QH) instead of SW QH. Maybe I need to get UHCI addon card at first. Please let me know if you has problem to get filo patch. And I would send you my tar ball about filo in Etherboot. Regards YH -----邮件原件----- 发件人: Jay Miller [mailto:jmiller@actuality-systems.com] 发送时间: 2004年5月13日 8:36 收件人: linuxbios(a)clustermatic.org 主题: Making payloads The reason why my S2885 image wasn't working is because my system only has 1 CPU populated. A little tweaking to remove the second processor and I can get FILO to come up. Unfortunately FILO does not detect the IDE disk. I noticed in the payloads section of Config.lb there are some multi-part payloads, like tg3--ide_disk.zelf, and tg3--filo.zelf. How do I create the multi-part payloads? Ideally I would be interested in a FILO that recognizes IDE. Alternatively I am also pursuing a tg3 payload that will load my kernel over the network. Thanks, Jay Miller Actuality Systems, Inc. jmiller(a)acutality-systems.com _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

1 0

答复: flash_rom with exclude range
by YhLu 13 May '04

13 May '04

Try this one. There still is parameter input problem, I don't want to check it in. Regards YH -----邮件原件----- 发件人: Hendricks David W. [mailto:dwh@lanl.gov] 发送时间: 2004年5月13日 11:43 收件人: YhLu 抄送: Li-Ta Lo; LinuxBIOS 主题: Re: flash_rom with exclude range The attachment didn't go through. I'm recieving errors when decompressing it. Is 5c9827677b8ae1b8d5098d073a6d6758 the correct md5sum? I'd be happy to look at it, though I'm just a lowly student. PS. Don't forget that you can commit on Sourceforge now :) On Thu, 13 May 2004, YhLu wrote: > David, > > Can you check the code? > > Ollie is on vocation? > > Regards > > YH > > -----ÓÊ¼þÔ¼þ----- > ·¢¼þÈË: YhLu > ·¢ËÍÊ±¼ä: 2004Äê5ÔÂ12ÈÕ 11:46 > ÊÕ¼þÈË: Li-Ta Lo; LinuxBIOS > Ö÷Ìâ: flash_rom with exclude range > > Ollie, > > I add exclude range feature to the Pm49FL004, and it should apply to other > chip. > > But can not make getopt work with input parameter. Please check it. > I hardcode exclude_start_position to 0x60000, and exclude_end_postion to > 0x8000. > > Regards > > YH > > >

1 0

RE: S2885 Uni-processor image
by ron minnich 13 May '04

13 May '04

On Thu, 13 May 2004, Jay Miller wrote: > Also, once I get fully up to speed let me know if I can help in anyway. > I believe in giving back, so if I can write a newbie HOWTO or something, > let me know. we always love these ... :-) ron

1 0

RE: S2885 Uni-processor image
by Jay Miller 13 May '04

13 May '04

The changes I'm making are just part of my learning process, and I don't intend to submit them for inclusion. I'm waiting on a custom embedded board that has a lot of the same pieces as the Tyan board (that's why I got one to play with). Are there any embedded systems in the tree? Also, once I get fully up to speed let me know if I can help in anyway. I believe in giving back, so if I can write a newbie HOWTO or something, let me know. Jay -----Original Message----- From: ron minnich [mailto:rminnich@lanl.gov] Sent: Wednesday, May 12, 2004 4:31 PM To: Jay Miller Cc: linuxbios(a)clustermatic.org Subject: Re: S2885 Uni-processor image On Wed, 12 May 2004, Jay Miller wrote: > My S2885 board is only uni-processor, so I modified the follow options: > > option CONFIG_MAX_CPUS=1 > option CONFIG_LOGICAL_CPUS=0 > option CONFIG_MAX_PHYSICAL_CPUS=1 > > But the static.c that is generated still enumerates two CPUs. What else > do I need to do to force uni-processor? > It should not matter. I would be happier if you left it at 2 and we made it work with 1. ron

1 0

答复: Making payloads
by YhLu 13 May '04

13 May '04

http://sourceforge.net/tracker/index.php?func=detail&aid=943300&group_id=423 3&atid=304233 -----邮件原件----- 发件人: YhLu 发送时间: 2004年5月13日 10:05 收件人: Jay Miller; linuxbios(a)clustermatic.org 主题: 答复: Making payloads Jay, I have merged into FILO into Etherboot. You can get that patch from Etherboot group. So you can build tg3--filo.zelf. About the PCI scan in Etherboot has no problem to find IDE other than bus 0. Current it already supports serial IDE and normal IDE. I'm working on add usb boot into FILO in Etherboot. The AMD8111 is using OHCI, and I'm trying to make use steven code for USB boot, but it is only support UHCI. OHCI has hardware support for ED (QH) instead of SW QH. Maybe I need to get UHCI addon card at first. Please let me know if you has problem to get filo patch. And I would send you my tar ball about filo in Etherboot. Regards YH -----邮件原件----- 发件人: Jay Miller [mailto:jmiller@actuality-systems.com] 发送时间: 2004年5月13日 8:36 收件人: linuxbios(a)clustermatic.org 主题: Making payloads The reason why my S2885 image wasn't working is because my system only has 1 CPU populated. A little tweaking to remove the second processor and I can get FILO to come up. Unfortunately FILO does not detect the IDE disk. I noticed in the payloads section of Config.lb there are some multi-part payloads, like tg3--ide_disk.zelf, and tg3--filo.zelf. How do I create the multi-part payloads? Ideally I would be interested in a FILO that recognizes IDE. Alternatively I am also pursuing a tg3 payload that will load my kernel over the network. Thanks, Jay Miller Actuality Systems, Inc. jmiller(a)acutality-systems.com _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

1 0

Fix for multiple superios of same type
by ron minnich 13 May '04

13 May '04

I just committed the fix Richard Smith needed. ron

1 0

Re: About EPIA-M Frambuffer + VGA on V2 status
by YhLu 13 May '04

13 May '04

>It lets user choose between IDE HARD BOOT or CF BOOT or ETHER BOOT and >so on, and automatically add options, configure stuffs and lauches makes >logs strings, and point errors or dangereous warnings at the user. It >also gather video.bios and flashes the whole into a specified target >(for now ROM chip). What do you think of this ? Use FILO in Etherboot, and you 1. Control Boot sequence by CMOS setting. 2. input option after "boot:" Regards YH

1 0

答复: Making payloads
by YhLu 13 May '04

13 May '04

The problem is in FILO it only scan bus 0. For s2885, need force it scan bus 3. for the amd8111 ide is in 3:4.1 Other Opteron MB, need to scan bus 1, for the amd8111 ide is in 1:4.1 Regards YH -----邮件原件----- 发件人: ron minnich [mailto:rminnich@lanl.gov] 发送时间: 2004年5月13日 9:28 收件人: Hendricks David W. 抄送: Jay Miller; linuxbios(a)clustermatic.org 主题: Re: Making payloads On Thu, 13 May 2004, Hendricks David W. wrote: > Oops, I forgot to mention Stefan's patch for FILO to make IDE work on the > S2885. I think this is the one: > http://www.clustermatic.org/pipermail/linuxbios/2003-October/005753.html can we get this put back into filo? ron _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

1 0

答复: Making payloads
by YhLu 13 May '04

13 May '04

Jay, I have merged into FILO into Etherboot. You can get that patch from Etherboot group. So you can build tg3--filo.zelf. About the PCI scan in Etherboot has no problem to find IDE other than bus 0. Current it already supports serial IDE and normal IDE. I'm working on add usb boot into FILO in Etherboot. The AMD8111 is using OHCI, and I'm trying to make use steven code for USB boot, but it is only support UHCI. OHCI has hardware support for ED (QH) instead of SW QH. Maybe I need to get UHCI addon card at first. Please let me know if you has problem to get filo patch. And I would send you my tar ball about filo in Etherboot. Regards YH -----邮件原件----- 发件人: Jay Miller [mailto:jmiller@actuality-systems.com] 发送时间: 2004年5月13日 8:36 收件人: linuxbios(a)clustermatic.org 主题: Making payloads The reason why my S2885 image wasn't working is because my system only has 1 CPU populated. A little tweaking to remove the second processor and I can get FILO to come up. Unfortunately FILO does not detect the IDE disk. I noticed in the payloads section of Config.lb there are some multi-part payloads, like tg3--ide_disk.zelf, and tg3--filo.zelf. How do I create the multi-part payloads? Ideally I would be interested in a FILO that recognizes IDE. Alternatively I am also pursuing a tg3 payload that will load my kernel over the network. Thanks, Jay Miller Actuality Systems, Inc. jmiller(a)acutality-systems.com _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot