coreboot

coreboot@coreboot.org

11 participants
39714 discussions

Start a nNew thread

Re: Hi
by Ronald G. Minnich 21 Dec '04

21 Dec '04

Sorry about the spam from the jackass guys, I will try to see how this happened tomorrow. ron

1 0

RE: K8 Routing Table.
by YhLu 21 Dec '04

21 Dec '04

Committed change with broadcast and response table for 4p above system. -----Original Message----- From: YhLu Sent: Tuesday, December 21, 2004 2:25 PM To: Stefan Reinauer Cc: 'Eric W. Biederman'; linuxbios(a)clustermatic.org Subject: RE: K8 Routing Table. Committed. -----Original Message----- From: Stefan Reinauer [mailto:stepan@openbios.org] Sent: Tuesday, December 21, 2004 10:29 AM To: YhLu Cc: 'Eric W. Biederman'; linuxbios(a)clustermatic.org Subject: Re: K8 Routing Table. * YhLu <YhLu(a)tyan.com> [041221 19:36]: > FYI. > > I made some changes to coherent_ht.c to make it create RT dynamically. > > If you like to check it, please let me know, and I would check it in. Sounds wonderful! Please go ahead! _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

1 0

RE: K8 Routing Table.
by YhLu 21 Dec '04

21 Dec '04

Committed. -----Original Message----- From: Stefan Reinauer [mailto:stepan@openbios.org] Sent: Tuesday, December 21, 2004 10:29 AM To: YhLu Cc: 'Eric W. Biederman'; linuxbios(a)clustermatic.org Subject: Re: K8 Routing Table. * YhLu <YhLu(a)tyan.com> [041221 19:36]: > FYI. > > I made some changes to coherent_ht.c to make it create RT dynamically. > > If you like to check it, please let me know, and I would check it in. Sounds wonderful! Please go ahead!

1 0

K8 Routing Table.
by YhLu 21 Dec '04

21 Dec '04

FYI. I made some changes to coherent_ht.c to make it create RT dynamically. If you like to check it, please let me know, and I would check it in. YH

2 1

RE: Running with VGA
by YhLu 20 Dec '04

20 Dec '04

Please get the Etherboot 5.2.6. You need to use patch for 2.4.22 and only enable ati rage xl framebuffer. Regards YH _____ From: Sagiv Yefet [mailto:sagivy@3vium.com] Sent: Sunday, December 19, 2004 2:27 AM To: YhLu; linuxbios(a)clustermatic.org Subject: RE: Running with VGA Great, It solved the problem. About the etherboot I try to run with 5.2.6 version as you said (enable BTEXT) and It is not working. It stack in: Jumping to LinuxBIOS When I use the 5.2.5 version that you sent me before It work. Command: Make bin/r8169.zelf Now the elf image is loading and there is no respond from the VGA.. The kernel parameter is: console=tty0. Maybe I didn't patch the kernel with the correct patch file. Where can I get the patch of the kernel supporting ATI Ragexl? I am using 2.4.24 kernel version. Thanks, Sagiv -----Original Message----- From: YhLu [mailto:YhLu@tyan.com] Sent: Friday, December 17, 2004 7:53 PM To: Sagiv Yefet; linuxbios(a)clustermatic.org Subject: RE: Running with VGA In the targest/tyan/s2850/Config.lb Change option ROM_IMAGE_SIZE=0x10000 to option ROM_IMAGE_SIZE=0x11800 option XIP_ROM_SIZE=0x20000 _____ From: Sagiv Yefet [mailto:sagivy@3vium.com] Sent: Friday, December 17, 2004 3:05 AM To: YhLu; linuxbios(a)clustermatic.org Subject: RE: Running with VGA I try to build freebios2-20041216-0400 And I get this compilation error: gcc -nostdlib -nostartfiles -static -o linuxbios -T ldscript.ld crt0.o /usr/local/lib/gcc-lib/i686-pc-linux-gnu/3.3.3/../../../../i686-pc-linux-gnu /bin/ld: section .reset [fffdfff0 -> fffdffff] overlaps section .rom [fffd88c1 -> fffe0d7f] /usr/local/lib/gcc-lib/i686-pc-linux-gnu/3.3.3/../../../../i686-pc-linux-gnu /bin/ld: section .id [fffdffd9 -> fffdffef] overlaps section .rom [fffd88c1 -> fffe0d7f] collect2: ld returned 1 exit status make: *** [linuxbios] Error 1 What do you think it is? Sagiv. -----Original Message----- From: YhLu [mailto:YhLu@tyan.com] Sent: Thursday, December 16, 2004 4:57 AM To: Sagiv Yefet; linuxbios(a)clustermatic.org Subject: RE: Running with VGA I commit the changes for you. Please check it out from http://snapshots.linuxbios.org/ <http://snapshots.linuxbios.org/> one hour later. YH _____ From: Sagiv Yefet [mailto:sagivy@3vium.com] Sent: Wednesday, December 15, 2004 12:09 AM To: YhLu; linuxbios(a)clustermatic.org Subject: RE: Running with VGA I have this definition in targets/tyan/s2850/Config.lb: option CONFIG_CONSOLE_BTEXT=1 Not default as you wrote. Is it ok? Should I had the same thing in src/mainboard/tyan/s2850/Config.lb? Sagiv. -----Original Message----- From: Yinghai Lu [mailto:yhlu@tyan.com] Sent: Monday, December 13, 2004 4:01 AM To: Sagiv Yefet; linuxbios(a)clustermatic.org Subject: RE: Running with VGA You need to add uses CONFIG_CONSOLE_BTEXT default CONFIG_CONSOLE_BTEXT=1 dir /drivers/ati/ragexl after that you can get ouput in Linuxbios after vga init. You also need to enable the btext in Etherboot. You should use Etherboot 5.2.6. it includes filo and btext console. About kernel, you need to use kernel patch to enable ragexl frame buffer support. YH _____ From: linuxbios-admin(a)clustermatic.org [mailto:linuxbios-admin@clustermatic.org] On Behalf Of Sagiv Yefet Sent: Sunday, December 12, 2004 5:23 AM To: linuxbios(a)clustermatic.org Subject: Running with VGA Hello, I am using Linux Bios on Tyan 2850. The machine is running with console. I add to the command line: "console=ttyS0,115200" and I have linux which runs with console. How can I run with VGA? Should I add some code to the bios? The VGA driver is: ATI Rage XL. Sagiv

1 0

irq_tables.c
by Gin 19 Dec '04

19 Dec '04

>You can only use getpir if you have a working bios. Otherwise you >Will get junk. Oh..i got it. I do have a working bios. Thank God. And I generated the irq_tables.c using getpir. It still doesn't help. One thing I did notice, it starts getting slow after mounting file system. gin

3 4

RE: Running with VGA
by Sagiv Yefet 19 Dec '04

19 Dec '04

Great, It solved the problem. About the etherboot I try to run with 5.2.6 version as you said (enable BTEXT) and It is not working. It stack in: Jumping to LinuxBIOS When I use the 5.2.5 version that you sent me before It work. Command: Make bin/r8169.zelf Now the elf image is loading and there is no respond from the VGA.. The kernel parameter is: console=tty0. Maybe I didn't patch the kernel with the correct patch file. Where can I get the patch of the kernel supporting ATI Ragexl? I am using 2.4.24 kernel version. Thanks, Sagiv -----Original Message----- From: YhLu [mailto:YhLu@tyan.com] Sent: Friday, December 17, 2004 7:53 PM To: Sagiv Yefet; linuxbios(a)clustermatic.org Subject: RE: Running with VGA In the targest/tyan/s2850/Config.lb Change option ROM_IMAGE_SIZE=0x10000 to option ROM_IMAGE_SIZE=0x11800 option XIP_ROM_SIZE=0x20000 _____ From: Sagiv Yefet [mailto:sagivy@3vium.com] Sent: Friday, December 17, 2004 3:05 AM To: YhLu; linuxbios(a)clustermatic.org Subject: RE: Running with VGA I try to build freebios2-20041216-0400 And I get this compilation error: gcc -nostdlib -nostartfiles -static -o linuxbios -T ldscript.ld crt0.o /usr/local/lib/gcc-lib/i686-pc-linux-gnu/3.3.3/../../../../i686-pc-linux -gnu/bin/ld: section .reset [fffdfff0 -> fffdffff] overlaps section .rom [fffd88c1 -> fffe0d7f] /usr/local/lib/gcc-lib/i686-pc-linux-gnu/3.3.3/../../../../i686-pc-linux -gnu/bin/ld: section .id [fffdffd9 -> fffdffef] overlaps section .rom [fffd88c1 -> fffe0d7f] collect2: ld returned 1 exit status make: *** [linuxbios] Error 1 What do you think it is? Sagiv. -----Original Message----- From: YhLu [mailto:YhLu@tyan.com] Sent: Thursday, December 16, 2004 4:57 AM To: Sagiv Yefet; linuxbios(a)clustermatic.org Subject: RE: Running with VGA I commit the changes for you. Please check it out from http://snapshots.linuxbios.org/ one hour later. YH _____ From: Sagiv Yefet [mailto:sagivy@3vium.com] Sent: Wednesday, December 15, 2004 12:09 AM To: YhLu; linuxbios(a)clustermatic.org Subject: RE: Running with VGA I have this definition in targets/tyan/s2850/Config.lb: option CONFIG_CONSOLE_BTEXT=1 Not default as you wrote. Is it ok? Should I had the same thing in src/mainboard/tyan/s2850/Config.lb? Sagiv. -----Original Message----- From: Yinghai Lu [mailto:yhlu@tyan.com] Sent: Monday, December 13, 2004 4:01 AM To: Sagiv Yefet; linuxbios(a)clustermatic.org Subject: RE: Running with VGA You need to add uses CONFIG_CONSOLE_BTEXT default CONFIG_CONSOLE_BTEXT=1 dir /drivers/ati/ragexl after that you can get ouput in Linuxbios after vga init. You also need to enable the btext in Etherboot. You should use Etherboot 5.2.6. it includes filo and btext console. About kernel, you need to use kernel patch to enable ragexl frame buffer support. YH _____ From: linuxbios-admin(a)clustermatic.org [mailto:linuxbios-admin@clustermatic.org] On Behalf Of Sagiv Yefet Sent: Sunday, December 12, 2004 5:23 AM To: linuxbios(a)clustermatic.org Subject: Running with VGA Hello, I am using Linux Bios on Tyan 2850. The machine is running with console. I add to the command line: "console=ttyS0,115200" and I have linux which runs with console. How can I run with VGA? Should I add some code to the bios? The VGA driver is: ATI Rage XL. Sagiv

1 0

i845GB MB progress
by zhu shi song 18 Dec '04

18 Dec '04

rtl8139 on my i845GV MB still can't work. Who know the meaning of post code of linux? I saw linux last post code was 99, using vendor's bios linux last post code was 97. I want to know the difference. tks zhu __________________________________ Do you Yahoo!? The all-new My Yahoo! - Get yours free! http://my.yahoo.com

4 6

RE: collapsing devices.
by YhLu 17 Dec '04

17 Dec '04

Just commit. Two ways calling In auto.c #if 0 // You need to preset bus num in PCI_DEV(0, 0x18,1) 0xe0, 0xe4, 0xe8, 0xec needs_reset |= ht_setup_chains(2); #else // automatically set that for you, but you might meet tight space needs_reset |= ht_setup_chains_x(); #endif YH non coherent ht chain setup automatically CVS: ---------------------------------------------------------------------- CVS: Enter Log. Lines beginning with `CVS:' are removed automatically CVS: CVS: Committing in . CVS: CVS: Modified Files: CVS: incoherent_ht.c CVS: ----------------------------------------------------------------------

1 0

RE: Running with VGA
by YhLu 17 Dec '04

17 Dec '04

In the targest/tyan/s2850/Config.lb Change option ROM_IMAGE_SIZE=0x10000 to option ROM_IMAGE_SIZE=0x11800 option XIP_ROM_SIZE=0x20000 _____ From: Sagiv Yefet [mailto:sagivy@3vium.com] Sent: Friday, December 17, 2004 3:05 AM To: YhLu; linuxbios(a)clustermatic.org Subject: RE: Running with VGA I try to build freebios2-20041216-0400 And I get this compilation error: gcc -nostdlib -nostartfiles -static -o linuxbios -T ldscript.ld crt0.o /usr/local/lib/gcc-lib/i686-pc-linux-gnu/3.3.3/../../../../i686-pc-linux-gnu /bin/ld: section .reset [fffdfff0 -> fffdffff] overlaps section .rom [fffd88c1 -> fffe0d7f] /usr/local/lib/gcc-lib/i686-pc-linux-gnu/3.3.3/../../../../i686-pc-linux-gnu /bin/ld: section .id [fffdffd9 -> fffdffef] overlaps section .rom [fffd88c1 -> fffe0d7f] collect2: ld returned 1 exit status make: *** [linuxbios] Error 1 What do you think it is? Sagiv. -----Original Message----- From: YhLu [mailto:YhLu@tyan.com] Sent: Thursday, December 16, 2004 4:57 AM To: Sagiv Yefet; linuxbios(a)clustermatic.org Subject: RE: Running with VGA I commit the changes for you. Please check it out from http://snapshots.linuxbios.org/ <http://snapshots.linuxbios.org/> one hour later. YH _____ From: Sagiv Yefet [mailto:sagivy@3vium.com] Sent: Wednesday, December 15, 2004 12:09 AM To: YhLu; linuxbios(a)clustermatic.org Subject: RE: Running with VGA I have this definition in targets/tyan/s2850/Config.lb: option CONFIG_CONSOLE_BTEXT=1 Not default as you wrote. Is it ok? Should I had the same thing in src/mainboard/tyan/s2850/Config.lb? Sagiv. -----Original Message----- From: Yinghai Lu [mailto:yhlu@tyan.com] Sent: Monday, December 13, 2004 4:01 AM To: Sagiv Yefet; linuxbios(a)clustermatic.org Subject: RE: Running with VGA You need to add uses CONFIG_CONSOLE_BTEXT default CONFIG_CONSOLE_BTEXT=1 dir /drivers/ati/ragexl after that you can get ouput in Linuxbios after vga init. You also need to enable the btext in Etherboot. You should use Etherboot 5.2.6. it includes filo and btext console. About kernel, you need to use kernel patch to enable ragexl frame buffer support. YH _____ From: linuxbios-admin(a)clustermatic.org [mailto:linuxbios-admin@clustermatic.org] On Behalf Of Sagiv Yefet Sent: Sunday, December 12, 2004 5:23 AM To: linuxbios(a)clustermatic.org Subject: Running with VGA Hello, I am using Linux Bios on Tyan 2850. The machine is running with console. I add to the command line: "console=ttyS0,115200" and I have linux which runs with console. How can I run with VGA? Should I add some code to the bios? The VGA driver is: ATI Rage XL. Sagiv

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot