coreboot

coreboot@coreboot.org

11 participants
39714 discussions

RE: boot linux from an ide
by YhLu 28 Dec '04

28 Dec '04

Just remind: His MB has E7501 .... So first step is make freebios2 work on that. He may need to copy Tyan S2735 to make his MB copy at first. Then he ..... Regards YH -----Original Message----- From: Ronald G. Minnich [mailto:rminnich@lanl.gov] Sent: Wednesday, October 27, 2004 12:11 PM To: Steve Kimball Cc: Gin; linuxbios(a)clustermatic.org Subject: Re: boot linux from an ide On Wed, 27 Oct 2004, Steve Kimball wrote: > To use FILO or Etherboot you change the payload. > So you need to change the > freebios2/targets/<vendor>/<board>/Config.lb > file to point to the FILO or Etherboot payload > and make linuxbios.rom. don't forget you can make your own! I have targets/arima/hdama/Config.filo.lb and I do this: ./buildtarget arima/hdama/Config.filo.lb File is this: # Sample config file for the Arima HDAMA target hdama.filo mainboard arima/hdama romimage "normal" option USE_FALLBACK_IMAGE=0 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Normal" payload /opt/filo/normal/filo.elf end romimage "fallback" option USE_FALLBACK_IMAGE=1 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Fallback" payload /opt/filo/fallback/filo.elf end buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" _______________________________________________ Linuxbios mailing list Linuxbios(a)clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios

6 9

vgabios.c and vgachip.h removed
by Li-Ta Lo 27 Dec '04

27 Dec '04

Hello, Is there any one actually using the pc80/vgabios.c and pc80/vgachip.h? The two files should not be in the pc80 directory because they have too much via/epia dependence. I just removed these two files and am working on porting the x86emu into LinuxBIOS. Ollie

3 2

Another LinuxBIOS Laptop Candidate?
by Bari Ari 25 Dec '04

25 Dec '04

<$500 Laptop at Walmart http://linux.slashdot.org/article.pl?sid=04/12/20/2314235&tid=163&tid=184&t… http://www.walmart.com/catalog/product.gsp?product_id=3504708&cat=179113&ty… -Bari

2 1

rtl8139 hangup
by zhu shi song 25 Dec '04

25 Dec '04

Now I'm testing my i845 based MB intensively. The box is running with linux 2.4.28, linuxbios v1 and my port supporting i845. I have met one problem. There is no packet on NIC after six hours rtl8139 hangup. I can't ping other machine from linux box and can't ping linux box from other machine either. I unplugged RJ45 from NIC and plugged it again. The rtl8139 returned to normal. Who know what cause the problem? Is it related with kernel, my linuxbios and i845 MB? tks zhu __________________________________ Do you Yahoo!? Jazz up your holiday email with celebrity designs. Learn more. http://celebrity.mail.yahoo.com

2 1

RE: Running with VGA
by Sagiv Yefet 24 Dec '04

24 Dec '04

I get 5.2.6 but the vga stack when reachs: Jumping to boot code at 0x20000 I enable btext. Sagiv -----Original Message----- From: YhLu [mailto:YhLu@tyan.com] Sent: Monday, December 20, 2004 8:34 PM To: Sagiv Yefet; linuxbios(a)clustermatic.org Subject: RE: Running with VGA Please get the Etherboot 5.2.6. You need to use patch for 2.4.22 and only enable ati rage xl framebuffer. Regards YH _____ From: Sagiv Yefet [mailto:sagivy@3vium.com] Sent: Sunday, December 19, 2004 2:27 AM To: YhLu; linuxbios(a)clustermatic.org Subject: RE: Running with VGA Great, It solved the problem. About the etherboot I try to run with 5.2.6 version as you said (enable BTEXT) and It is not working. It stack in: Jumping to LinuxBIOS When I use the 5.2.5 version that you sent me before It work. Command: Make bin/r8169.zelf Now the elf image is loading and there is no respond from the VGA.. The kernel parameter is: console=tty0. Maybe I didn't patch the kernel with the correct patch file. Where can I get the patch of the kernel supporting ATI Ragexl? I am using 2.4.24 kernel version. Thanks, Sagiv -----Original Message----- From: YhLu [mailto:YhLu@tyan.com] Sent: Friday, December 17, 2004 7:53 PM To: Sagiv Yefet; linuxbios(a)clustermatic.org Subject: RE: Running with VGA In the targest/tyan/s2850/Config.lb Change option ROM_IMAGE_SIZE=0x10000 to option ROM_IMAGE_SIZE=0x11800 option XIP_ROM_SIZE=0x20000 _____ From: Sagiv Yefet [mailto:sagivy@3vium.com] Sent: Friday, December 17, 2004 3:05 AM To: YhLu; linuxbios(a)clustermatic.org Subject: RE: Running with VGA I try to build freebios2-20041216-0400 And I get this compilation error: gcc -nostdlib -nostartfiles -static -o linuxbios -T ldscript.ld crt0.o /usr/local/lib/gcc-lib/i686-pc-linux-gnu/3.3.3/../../../../i686-pc-linux -gnu/bin/ld: section .reset [fffdfff0 -> fffdffff] overlaps section .rom [fffd88c1 -> fffe0d7f] /usr/local/lib/gcc-lib/i686-pc-linux-gnu/3.3.3/../../../../i686-pc-linux -gnu/bin/ld: section .id [fffdffd9 -> fffdffef] overlaps section .rom [fffd88c1 -> fffe0d7f] collect2: ld returned 1 exit status make: *** [linuxbios] Error 1 What do you think it is? Sagiv. -----Original Message----- From: YhLu [mailto:YhLu@tyan.com] Sent: Thursday, December 16, 2004 4:57 AM To: Sagiv Yefet; linuxbios(a)clustermatic.org Subject: RE: Running with VGA I commit the changes for you. Please check it out from http://snapshots.linuxbios.org/ one hour later. YH _____ From: Sagiv Yefet [mailto:sagivy@3vium.com] Sent: Wednesday, December 15, 2004 12:09 AM To: YhLu; linuxbios(a)clustermatic.org Subject: RE: Running with VGA I have this definition in targets/tyan/s2850/Config.lb: option CONFIG_CONSOLE_BTEXT=1 Not default as you wrote. Is it ok? Should I had the same thing in src/mainboard/tyan/s2850/Config.lb? Sagiv. -----Original Message----- From: Yinghai Lu [mailto:yhlu@tyan.com] Sent: Monday, December 13, 2004 4:01 AM To: Sagiv Yefet; linuxbios(a)clustermatic.org Subject: RE: Running with VGA You need to add uses CONFIG_CONSOLE_BTEXT default CONFIG_CONSOLE_BTEXT=1 dir /drivers/ati/ragexl after that you can get ouput in Linuxbios after vga init. You also need to enable the btext in Etherboot. You should use Etherboot 5.2.6. it includes filo and btext console. About kernel, you need to use kernel patch to enable ragexl frame buffer support. YH _____ From: linuxbios-admin(a)clustermatic.org [mailto:linuxbios-admin@clustermatic.org] On Behalf Of Sagiv Yefet Sent: Sunday, December 12, 2004 5:23 AM To: linuxbios(a)clustermatic.org Subject: Running with VGA Hello, I am using Linux Bios on Tyan 2850. The machine is running with console. I add to the command line: "console=ttyS0,115200" and I have linux which runs with console. How can I run with VGA? Should I add some code to the bios? The VGA driver is: ATI Rage XL. Sagiv

1 0

if in the chip/device block
by YhLu 23 Dec '04

23 Dec '04

Why followings can not pass the buildtarget .. end if CONFIG_MAX_PHYSICAL_CPUS>4 chip northbridge/amd/amdk8 device pci 1c.0 on end device pci 1c.0 on end device pci 1c.0 on end device pci 1c.1 on end device pci 1c.2 on end device pci 1c.3 on end end chip northbridge/amd/amdk8 device pci 1d.0 on end device pci 1d.0 on end device pci 1d.0 on end device pci 1d.1 on end device pci 1d.2 on end device pci 1d.3 on end end chip northbridge/amd/amdk8 device pci 1e.0 on end device pci 1e.0 on end device pci 1e.0 on end device pci 1e.1 on end device pci 1e.2 on end device pci 1e.3 on end end chip northbridge/amd/amdk8 device pci 1f.0 on end device pci 1f.0 on end device pci 1f.0 on end device pci 1f.1 on end device pci 1f.2 on end device pci 1f.3 on end end end end # pci_domain

1 0

How about using LinuxBIOS for WakeUp
by Juha Anon 23 Dec '04

23 Dec '04

I'm woundering if LinuxBIOS would be a good basis for a wakeup mechanism for a Home Theater PC (HTPC). The general idea is that the computer should be in standby until the time when a recording is scheduled. Then it would boot up and do it's job; and then go back to standby again. The reason for not having the PC running is partly because a HTPC is in the living room and we dont want to have the noice it makes when running. It is also nice to save all that power... Another use of this is to wake the PC up when something happens -- like a mail arrives. Then it would run a spam filter and turn on a notification of some kind if the message wasn't spam. Perhaps LinuxBIOS could be running and listen for the event and not boot up further until it's needed. I havn't been studing the LinuxBIOS yet, so I don't really know if this is a viable idea or not. Is it? -- Juha

3 2

Vga bios?
by Adam Talbot 22 Dec '04

22 Dec '04

If i have the rom image for the graphics card rom, can I load that into linuxbios? -Adam

3 3

No booting
by Adam Talbot 22 Dec '04

22 Dec '04

OK, Guys... I am stuck on this one. I have a Shuttle motherboard FV24 running a Via vt8604 chipset. I have the system booting linux and have been tring to install linuxbios. I can never get any output from the com port. I have console redirect running in grub, so I no that part is running and good test point. My current config is just the epia config with an updated irq_tables.c. I make the linuxbios.rom, clean compile, no errors. I flash the system I get nothing. No boot, no output from console, nothing.... What am I missing? http://www.dslwebserver.com/main/fr_index.html?/main/shuttle-sv24-2.html -Adam Talbot

3 4

Merry X'mas
by Gin 21 Dec '04

21 Dec '04

Thanks for everyone's help this year. Wish you guys a wonderful holiday. gin

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot