coreboot

coreboot@coreboot.org

12 participants
39716 discussions

Re: Geode GX1 and IRQ tables
by ramesh bios 02 Mar '05

02 Mar '05

Hi, Thanks for the hint. I see the BC_XMAP registers touched in nsc/gx1/gx_setup.inc. .long BC_XMAP_1, 0x60 .long BC_XMAP_2, 0 .long BC_XMAP_3, 0 And from the gx1 spec: --- GX_BASE+800Ch-800Fh BC_XMAP_3 Register (R/W) Default Value = 00000000h 19:16 F0 F0 Region: Region control field for address range F0000h to F3FFFh. Bit Position: Function 3 PCI Accessible: The PCI slave can access this memory if this bit is set high and if the appropriate Read or Write Enable bit is also set high. 2 Cache Enable1: Caching this region of memory is inhibited if this bit is cleared. 1 Write Enable1: Write operations to this region of memory are allowed if this bit is set high. If this bit is cleared, then write operations in this region are directed to the PCI master. 0 Read Enable: Read operations to this region of memory are allowed if this bit is set high. If this bit is cleared then read operations in this region are directed to the PCI master. --- So 3 looks like the right value to set to enable read and write. So at first I tried with 0x33333333 just to see what would happen if I made all those regions read/write. (I'm still not sure how the gx1 processor knows what part of SDRAM those regions are mapped to.) In any case, that results in a hang immediately after boot. You see just: "LinuxBIOS starting..." Meaning, you don't see even raminit occur. Then I tried just 0x00030000 and that had the same effect. I then tried moving the 3 across one by one to see if any would avoid the hang. But nope, a 3 in any of those nibbles causes the hang. I then tried to set write only, that is, a value of 0x2. That does boot. But then one can't readback the table. So, I'm stuck. I think I need to figure out how and where we tell the gx1 what address range maps to the SDRAM. --- Ian Smith <ian(a)abelon.com> wrote: > Ramesh, > > At 04:02 02/03/2005, ramesh bios wrote: > >1. Shadow RAM > > > >I guess I would need to find a way to tell the > >northbridge to enable shadow RAM for some range > around > >f0000. I looked through the CS5530A datasheet and > see > >shadow registers but no mention of shadowing RAM. > Nor > >in the GX1 datasheet either. I'm looking for some > >register in either the GX1 or the CS5530A that > would > >enable this. I am looking for some register that > would > >enable me to remap the C0000-F0000 address range to > >somewhere in sdram. Is that the right thing to be > >looking for? > > I think you may need to look at your settings for > the BC_XMAP_2 and > BC_XMAP_3 registers on the GX1 - these control read > and write access to the > BIOS shadow ram regions. > > >2. Uncompressed payload > >I'm not sure I understand what this means. Right > now, > >my payload is filo. In the build, I see: > > > >dd conv=sync bs=196608 if=/bios/filo-0.4.2/filo.elf > >of=payload.block > >cat payload.block > romimage > > > >Oh, I guess you must mean this stuff: > > > >objcopy -O binary linuxbios_c linuxbios_payload.bin > >./nrv2b e linuxbios_payload.bin > >linuxbios_payload.nrv2b > > > >So I guess there is some kind of compression going > on > >there. > > Not sure if you're using Linuxbios V1 or V2 but in > V1 there is an option in > your build config file to turn off compression - you > probably need > something like: > > option CONFIG_COMPRESS=0 > > If it's V2 then no doubt there is an equivalent > there too. > > >Which method would be the right thing to do? I'll > look > >at the shadow ram thing first then. > > > >Thanks. > > Nope this helps > > Ian > > >--- "Ronald G. Minnich" <rminnich(a)lanl.gov> wrote: > > > > > > > > > On Tue, 1 Mar 2005, ramesh bios wrote: > > > > > > > Strike that. The issue is somewhere with > > > > copy_pirq_routing_table. IE: why does the copy > to > > > > f0000 fail. I had assumed that the 500 address > was > > > an > > > > alternate location that the table was copied > to. > > > So > > > > now, I'm looking at that f000 failure. > > > > > > > > > the copy to f0000 fails because shadow ram is > not > > > set up. > > > > > > You can fix this one of two ways. One is to > figure > > > out how to enable > > > shadow ram. The second is to make the payload > > > uncompressed. The copy will > > > still fail but linux will find the PIRQ table > > > anyway. > > > > > > ron > > > _______________________________________________ > > > Linuxbios mailing list > > > Linuxbios(a)clustermatic.org > > > > >http://www.clustermatic.org/mailman/listinfo/linuxbios > > > > > > > > > > >__________________________________ > >Do you Yahoo!? > >Yahoo! Mail - 250MB free storage. Do more. Manage > less. > >http://info.mail.yahoo.com/mail_250 > >_______________________________________________ > >Linuxbios mailing list > >Linuxbios(a)clustermatic.org > >http://www.clustermatic.org/mailman/listinfo/linuxbios > > _______________________________________________ > Linuxbios mailing list > Linuxbios(a)clustermatic.org > http://www.clustermatic.org/mailman/listinfo/linuxbios > __________________________________ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web http://birthday.yahoo.com/netrospective/

2 1

RE: FILO dependencies
by Stephen.Kimball＠bench.com 02 Mar '05

02 Mar '05

I'm using FILO 0.4.2 and have PCI_BRUTE_SCAN=1. I found it to be too brute, so I changed it to only scan buses 0,1,2. No need to scan 256 buses. FILO finds the IDE controller, but the IDE_BASE0 and IDE_BASE1 in FILO's ide.c point to the wrong place. These are PCI addresses? Does FILO assume 8111's PCI addresses for it's IDE? Steve -----Original Message----- From: Stefan Reinauer [mailto:stepan@openbios.org] Sent: Wednesday, March 02, 2005 2:07 PM To: Kimball, Stephen Cc: linuxbios(a)clustermatic.org Subject: Re: FILO dependencies * Stephen.Kimball(a)bench.com <Stephen.Kimball(a)bench.com> [050302 19:40]: > > I'm using FILO with nVidia reference board with a CK804. I've got > LinuxBIOS to load FILO and FILO sees the IDE controller but not the > drive. I thought FILO was device independent, but could the IDE > controllers on the CK804 require FILO changes? Thanks. You should be using 0.4.2 and be sure to set PCI_BRUTE_SCAN = 1 You probably end up with filo not looking at anything but bus 0. Common problem on amd64 boards. Stefan

1 0

FILO dependencies
by Stephen.Kimball＠bench.com 02 Mar '05

02 Mar '05

I'm using FILO with nVidia reference board with a CK804. I've got LinuxBIOS to load FILO and FILO sees the IDE controller but not the drive. I thought FILO was device independent, but could the IDE controllers on the CK804 require FILO changes? Thanks. Steve ----------------------- serial output ----------------------------------- Press <Enter> for default boot, or <Esc> for boot prompt... boot: hdc1:/boot/vmlinuz-2.6.9-1.667smp initrd=hdc1:/boot/initrd-2.6.9-1.667smp.img root=LABEL=/1 console=tty0 console=ttyS0,115200 desktop splash=silent showopts malloc_diag: alloc: 624 bytes (5 blocks), free: 15752 bytes (1 blocks) malloc_diag: alloc: 640 bytes (6 blocks), free: 15736 bytes (1 blocks) file_open: dev=hdc1, path=/boot/vmlinuz-2.6.9-1.667smp find_ide_controller: found PCI IDE controller 10de:0053 prog_if=0x8a find_ide_controller: secodary channel: compatibility mode find_ide_controller: cmd_base=0x170 ctrl_base=0x374 Detected floating bus No drive detected on IDE channel 1 devopen: failed to open ide malloc_diag: alloc: 624 bytes (5 blocks), free: 15752 bytes (1 blocks) malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) boot: hdc1:/boot/vmlinuz-2.6.9-1.667smp initrd=hdc1:/boot/initrd-2.6.9-1.667smp.img root=LABEL=/1 console=tty0 console=ttyS0,115200 desktop splash=silent showopts malloc_diag: alloc: 624 bytes (5 blocks), free: 15752 bytes (1 blocks) malloc_diag: alloc: 640 bytes (6 blocks), free: 15736 bytes (1 blocks) file_open: dev=hdc1, path=/boot/vmlinuz-2.6.9-1.667smp Drive 2 does not exist devopen: failed to open ide malloc_diag: alloc: 624 bytes (5 blocks), free: 15752 bytes (1 blocks) malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) boot: hdc1:/boot/vmlinuz-2.6.9-1.667smp initrd=hdc1:/boot/initrd-2.6.9-1.667smp.img root=LABEL=/1 console=tty0 console=ttyS0,115200 desktop splash=silent showopts

4 4

HP Pavillion ZV5000 (Laptop)
by David Hendricks 02 Mar '05

02 Mar '05

Here's the info on the ZV5000 I promised earlier (To Yhlu IIRC) in case you're still interested in K8 laptops. HP Pavillion ZV5000 0000:00:00.0 Host bridge: nVidia Corporation: Unknown device 00d1 (rev a4) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at e8000000 (32-bit, prefetchable) Capabilities: [44] #08 [0180] Capabilities: [c0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x1 0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00d0 (rev a6) Subsystem: nVidia Corporation: Unknown device 0c80 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 0000:00:01.1 SMBus: nVidia Corporation: Unknown device 00d4 (rev a4) Subsystem: Hewlett-Packard Company: Unknown device 006d Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at 2040 [size=64] Region 5: I/O ports at 2000 [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 00d7 (rev a5) (prog-if 10 [OHCI]) Subsystem: nVidia Corporation: Unknown device 0c80 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, non-prefetchable) Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 00d7 (rev a5) (prog-if 10 [OHCI]) Subsystem: nVidia Corporation: Unknown device 0c80 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 10 Region 0: Memory at e0001000 (32-bit, non-prefetchable) Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:02.2 USB Controller: nVidia Corporation: Unknown device 00d8 (rev a2) (prog-if 20 [EHCI]) Subsystem: nVidia Corporation: Unknown device 0c80 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin C routed to IRQ 10 Region 0: Memory at e0004000 (32-bit, non-prefetchable) Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:06.0 Multimedia audio controller: nVidia Corporation: Unknown device 00da (rev a2) Subsystem: Hewlett-Packard Company: Unknown device 006d Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 1400 Region 1: I/O ports at 1c00 [size=128] Region 2: Memory at e0002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:06.1 Modem: nVidia Corporation: Unknown device 00d9 (rev a2) (prog-if 00 [Generic]) Subsystem: Hewlett-Packard Company: Unknown device 006d Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at 1800 Region 1: I/O ports at 1c80 [size=128] Region 2: Memory at e0003000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:08.0 IDE interface: nVidia Corporation: Unknown device 00d5 (rev a5) (prog-if 8a [Master SecP PriP]) Subsystem: nVidia Corporation: Unknown device 0c80 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Region 4: I/O ports at 2080 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:0a.0 PCI bridge: nVidia Corporation: Unknown device 00dd (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=128 I/O behind bridge: 00003000-00007fff Memory behind bridge: e0100000-e17fffff Prefetchable memory behind bridge: fff00000-000fffff Expansion ROM at 00003000 [disabled] [size=20K] BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- 0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 00d2 (rev a4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 Bus: primary=00, secondary=01, subordinate=01, sec-latency=10 I/O behind bridge: 0000f000-00000fff Memory behind bridge: e2000000-e2ffffff Prefetchable memory behind bridge: f0000000-f80fffff BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] #08 [2101] 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 0000:01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 440 Go 64M] (rev a3) (prog-if 00 [VGA]) Subsystem: Hewlett-Packard Company: Unknown device 006d Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e2000000 (32-bit, non-prefetchable) Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 2: Memory at f8000000 (32-bit, prefetchable) [size=512K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 0000:02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company: Unknown device 006d Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 1000ns max), cache line size 10 Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0108000 (32-bit, non-prefetchable) Region 1: Memory at e0100000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 0000:02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Hewlett-Packard Company: Unknown device 006d Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 7000 Region 1: Memory at e0108800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:02:02.0 Network controller: Broadcom Corporation BCM94306 802.11g (rev 03) Subsystem: Hewlett-Packard Company: Unknown device 12f4 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0104000 (32-bit, non-prefetchable) 0000:02:04.0 CardBus bridge: Texas Instruments: Unknown device ac54 (rev 01) Subsystem: Hewlett-Packard Company: Unknown device 006d Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, cache line size 04 Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0106000 (32-bit, non-prefetchable) Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: e0200000-e03ff000 (prefetchable) Memory window 1: e0400000-e05ff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0000:02:04.1 CardBus bridge: Texas Instruments: Unknown device ac54 (rev 01) Subsystem: Hewlett-Packard Company: Unknown device 006d Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, cache line size 04 Interrupt: pin B routed to IRQ 10 Region 0: Memory at e0107000 (32-bit, non-prefetchable) Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: e1000000-e13ff000 (prefetchable) Memory window 1: e0c00000-e0fff000 I/O window 0: 00006000-00006fff I/O window 1: 00005000-00005fff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0000:02:04.2 System peripheral: Texas Instruments: Unknown device 8201 (rev 01) Subsystem: Hewlett-Packard Company: Unknown device 006d Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1750ns min, 1000ns max), cache line size 10 Region 0: I/O ports at 7400 Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:00.0 Host bridge: nVidia Corporation: Unknown device 00d1 (rev a4) 00: de 10 d1 00 06 01 b0 00 a4 00 00 06 00 00 00 00 10: 08 00 00 e8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 08 c0 80 01 20 00 01 01 d0 00 00 00 50: 23 04 07 00 03 00 00 00 00 00 00 00 00 00 00 00 60: 32 31 03 00 66 45 04 00 66 06 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 13 66 66 00 80: 13 66 66 00 c8 00 00 00 70 00 00 00 07 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 02 00 20 00 17 02 00 1f 01 00 00 00 ff ff ff ff d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00d0 (rev a6) 00: de 10 d0 00 0f 00 a0 00 a6 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 80 0c 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: de 10 80 0c 00 00 d0 fe fa 3e ff 00 fa 3e ff 00 50: fa 3e ff 00 7f b1 29 04 00 00 00 01 00 00 ff ff 60: 01 80 00 00 01 84 00 00 01 88 00 00 00 00 f9 ff 70: 10 00 ff ff 01 00 00 00 00 00 71 00 ab 0b 0b 00 80: 00 aa 00 00 ab 00 ab 00 b0 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 10 00 00 00 00 00 00 00 04 40 00 71 33 14 00 f0: 00 ff 5f bf 00 00 00 00 10 ff ff ff 00 00 30 07 0000:00:01.1 SMBus: nVidia Corporation: Unknown device 00d4 (rev a4) 00: de 10 d4 00 01 00 b0 00 a4 00 05 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 41 20 00 00 01 20 00 00 00 00 00 00 3c 10 6d 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01 40: 3c 10 6d 00 01 00 02 c0 00 00 00 00 00 00 00 00 50: 41 20 00 00 01 20 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 00d7 (rev a5) 00: de 10 d7 00 07 00 b0 00 a5 10 03 0c 00 00 80 00 10: 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 80 0c 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01 40: de 10 80 0c 01 00 02 fe 00 00 00 00 02 00 00 00 50: 00 00 00 00 1d 47 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 ff ff ff 04 14 30 07 0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 00d7 (rev a5) 00: de 10 d7 00 07 00 b0 00 a5 10 03 0c 00 00 80 00 10: 00 10 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 80 0c 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 03 01 40: de 10 80 0c 01 00 02 fe 00 00 00 00 03 00 00 00 50: 00 00 00 00 1d 47 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 ff ff ff 04 14 30 07 0000:00:02.2 USB Controller: nVidia Corporation: Unknown device 00d8 (rev a2) 00: de 10 d8 00 06 00 b0 00 a2 20 03 0c 00 00 80 00 10: 00 40 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 80 0c 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 03 03 01 40: de 10 80 0c 0a 80 80 20 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 01 00 00 60 98 01 c3 13 00 00 00 00 00 00 70: 00 00 00 04 00 10 30 80 89 3d 84 22 e7 25 04 80 80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 00 00 00 00 08 e0 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 ff ff ff 00 00 30 07 0000:00:06.0 Multimedia audio controller: nVidia Corporation: Unknown device 00da (rev a2) 00: de 10 da 00 07 00 b0 00 a2 00 01 04 00 00 80 00 10: 01 14 00 00 01 1c 00 00 00 20 00 e0 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6d 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 05 40: 3c 10 6d 00 01 00 02 06 00 00 00 00 06 01 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 ff ff ff 00 00 30 07 0000:00:06.1 Modem: nVidia Corporation: Unknown device 00d9 (rev a2) 00: de 10 d9 00 03 00 b0 00 a2 00 03 07 00 00 80 00 10: 01 18 00 00 81 1c 00 00 00 30 00 e0 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6d 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 02 05 40: 3c 10 6d 00 01 00 02 80 00 00 00 00 07 01 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 ff ff ff 00 00 30 07 0000:00:08.0 IDE interface: nVidia Corporation: Unknown device 00d5 (rev a5) 00: de 10 d5 00 05 00 b0 00 a5 8a 01 01 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 81 20 00 00 00 00 00 00 00 00 00 00 de 10 80 0c 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01 40: de 10 80 0c 01 00 02 00 00 00 00 00 00 09 00 00 50: 03 f0 00 00 00 00 00 00 a8 20 a8 20 22 00 20 20 60: 00 03 00 c6 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 88 1c 1e 00 00 02 2c 00 f0 2f 1e 90: 00 00 18 34 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 12 ff ff ff 08 11 30 07 0000:00:0a.0 PCI bridge: nVidia Corporation: Unknown device 00dd (rev a2) 00: de 10 dd 00 07 01 a0 00 a2 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 80 30 70 80 a2 20: 10 e0 70 e1 f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 02 40: 00 00 03 00 01 00 02 00 01 00 00 00 00 00 04 00 50: 00 00 fe 1f 00 00 00 00 ff 1f 00 00 03 00 80 00 60: 00 00 80 00 00 00 00 00 00 00 00 00 03 00 90 00 70: 00 00 90 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 00d2 (rev a4) 00: de 10 d2 00 07 01 20 02 a4 00 04 06 00 10 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 0a f0 00 20 22 20: 00 e2 f0 e2 00 f0 00 f8 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 0f 00 40: 01 00 00 00 00 00 f0 1f 20 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 10 ff ff ff ff ff ff ff ff 60: ff 40 ff 40 00 00 00 20 00 00 00 20 ff ff ff ff 70: ff ff ff ff 00 00 00 00 00 00 00 00 ff ff ff ff 80: ff ff ff ff 00 80 00 00 ea 01 00 00 ff ff ff ff 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff a0: 17 02 00 1f 00 00 00 00 0c 00 00 00 00 00 00 00 b0: 04 07 00 00 00 00 00 00 01 00 00 00 00 00 00 00 c0: 00 00 00 00 20 00 00 00 00 00 30 07 00 00 30 07 d0: 00 00 00 00 00 00 00 00 08 00 00 e8 ff ff ff 07 e0: 00 00 50 02 00 00 51 02 00 00 50 02 00 00 51 02 f0: 00 00 50 02 00 00 51 02 00 00 50 02 00 00 51 02 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 00 00 00 00 e4 00 00 00 0f cc 00 0f 4c 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 00 01 21 20 00 11 10 22 04 75 80 02 00 00 00 90: 56 04 51 02 00 00 ff 00 07 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 1f 00 00 00 20 00 01 00 00 00 50: 00 00 20 00 02 00 00 00 00 00 20 00 03 00 00 00 60: 00 00 20 00 04 00 00 00 00 00 20 00 05 00 00 00 70: 00 00 20 00 06 00 00 00 00 00 20 00 07 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 03 0a 00 00 00 0b 00 00 03 00 20 00 00 0b fe 00 c0: 00 00 00 00 00 00 00 00 13 10 00 00 00 f0 0f 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 00 00 00 01 04 00 00 01 08 00 00 01 0c 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 f2 e0 01 00 f2 e0 01 00 f2 e0 01 00 f2 e0 01 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 22 00 00 00 00 00 00 00 35 33 72 13 30 0a 00 00 90: 00 8c 0c 08 06 08 5b 0e 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 5a 62 bc 5f 21 00 00 00 ef 5f 02 9b 6a 39 ef 85 c0: 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 68 82 04 2a 24 10 80 0a 80 8a 00 c2 60 24 80 80 e0: 14 8b 60 84 34 08 42 0b a3 79 08 f0 20 01 00 1d f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 50: 48 08 00 00 00 00 00 00 00 00 00 00 c0 86 1a fd 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 11 01 02 51 11 80 00 50 00 38 00 08 1b 22 00 00 80: 61 63 07 63 13 41 13 61 00 00 00 00 00 00 00 00 90: 05 00 00 00 74 00 00 00 00 50 02 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 30 00 00 80 57 1c 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 01 07 0d 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 20 08 50 00 08 01 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 440 Go 64M] (rev a3) 00: de 10 79 01 07 00 b0 02 a3 00 00 03 00 40 00 00 10: 00 00 00 e2 08 00 00 f0 08 00 00 f8 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6d 00 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01 40: 3c 10 6d 00 02 00 20 00 17 00 00 1f 00 00 00 00 50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00 60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) 00: 4c 10 26 80 16 01 10 02 00 10 00 0c 10 40 00 00 10: 00 80 10 e0 00 00 10 e0 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6d 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 04 40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00 f0: 00 00 00 00 00 10 00 00 3c 10 6d 00 00 00 00 00 0000:02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00: ec 10 39 81 07 01 90 02 10 00 00 02 00 40 00 00 10: 01 70 00 00 00 88 10 e0 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6d 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 20 40 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 c2 f7 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:02:02.0 Network controller: Broadcom Corporation BCM94306 802.11g (rev 03) 00: e4 14 20 43 06 01 00 00 03 00 80 02 00 40 00 00 10: 00 40 10 e0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 f4 12 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 40: 01 00 c2 07 00 40 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 10 00 18 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:02:04.0 CardBus bridge: Texas Instruments: Unknown device ac54 (rev 01) 00: 4c 10 54 ac 07 00 10 02 01 00 07 06 04 a8 82 00 10: 00 60 10 e0 a0 00 00 02 02 03 06 b0 00 00 20 e0 20: 00 f0 3f e0 00 00 40 e0 00 f0 5f e0 00 40 00 00 30: fc 40 00 00 00 44 00 00 fc 44 00 00 0b 01 c0 05 40: 3c 10 6d 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 61 f0 44 08 19 00 00 10 07 00 03 00 22 1d 11 01 90: c0 22 64 60 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 12 fe 00 00 c0 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:02:04.1 CardBus bridge: Texas Instruments: Unknown device ac54 (rev 01) 00: 4c 10 54 ac 07 00 10 02 01 00 07 06 04 a8 82 00 10: 00 70 10 e0 a0 00 00 02 02 07 0a b0 00 00 00 e1 20: 00 f0 3f e1 00 00 c0 e0 00 f0 ff e0 00 60 00 00 30: fc 6f 00 00 00 50 00 00 fc 5f 00 00 0a 02 c0 05 40: 3c 10 6d 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 61 f1 44 08 19 00 00 10 07 00 03 00 22 1d 11 01 90: c0 22 64 60 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 12 fe 00 00 c0 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:02:04.2 System peripheral: Texas Instruments: Unknown device 8201 (rev 01) 00: 4c 10 01 82 07 01 10 02 01 00 80 08 10 40 00 00 10: 01 74 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6d 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 07 04 40: 00 00 00 00 01 00 02 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 02 00 00 00 fc 00 01 00 0a 00 0f 00 10 30 d3 1f

2 1

documentation page on wiki
by Jamie Rollins 01 Mar '05

01 Mar '05

So I'm trying to put together a Documentation page on the new site. However, since I don't actually know how to do any of this stuff myself (which is why I'm very excited about the new page), I'm just culling documentation from where ever I can find it. The only "official" things I'm finding right now are the old how-to's and the LinuxBIOS Configuration Tool paper from Ron Minnich in Jan 2001 that I pulled from the V1 CVS repository. There's also a very nice article that I found from Linux Magazine that is better than most other things that I've read about getting started: http://www.linuxbios.org/papers/linux-magazine/LinuxBIOS.pdf Does any one have any idea whether or not we can re-print this article, or at least link to it from the page? Also, I'm making a call for all documentation input. I think that the page should be organized with a general documentation applicable to all systems, and then how-to's for specific motherboards (which can be linked to from the Supported Motherboards page). jamie.

1 0

[wiki] v2 PC-Chips support
by Justin C. Darby 01 Mar '05

01 Mar '05

Hi all, I seem to remember LinuxBIOS having a few PC-Chips motherboards supported, but there is currently no mention of it on the page. Is this not in v2? Are any of the supported PC-Chips motherboards still in production or use that should be in the documentation? Thanks, Justin

2 1

error in making bios
by Ramesh Chhaba 01 Mar '05

01 Mar '05

Hi All , I was just trying to make a linuxBIOS for epic. at last step it gives error . ././buildrom linuxbios.strip linuxbios.rom ../../../../../lnxieepro100.ebi 0x10000 0x20000 ../../../../../lnxieepro100.ebi: No such file or directory make[1]: *** [linuxbios.rom] Error 2 make[1]: Leaving directory `/usr/downloads/freebios-20041019-1200/freebios2/targets/via/epia/epia/normal' make: *** [normal/linuxbios.rom] Error 1 [root@Linux3 epia]# Can anybody tell how this error can be removed Thanks Ramesh ________________________________________________________________________ Yahoo! India Matrimony: Find your life partner online Go to: http://yahoo.shaadi.com/india-matrimony

3 2

Re: Porting Linuxbios to Via P4m266A
by sherlock＠vsnl.com 01 Mar '05

01 Mar '05

Hi all, Just recieved the spec sheet for ProSavageDDR P4M266 VT8751 P4 DDR SMA North Bridge. Bad news is that I am not supposed to disclose it without permission (as per the Copyright notice). At this point I have recieved the manual without any NDA although the manual says "Confidential NDA Required". I have written back asking for permission to disclose the contents without NDA. I have pointed out the benefits they are going to derive. Let's see how it goes. I have a feeling that they may allow disclosure without NDA. rgds jtd

3 2

Re: Geode GX1 and IRQ tables
by ramesh bios 01 Mar '05

01 Mar '05

1. Shadow RAM I guess I would need to find a way to tell the northbridge to enable shadow RAM for some range around f0000. I looked through the CS5530A datasheet and see shadow registers but no mention of shadowing RAM. Nor in the GX1 datasheet either. I'm looking for some register in either the GX1 or the CS5530A that would enable this. I am looking for some register that would enable me to remap the C0000-F0000 address range to somewhere in sdram. Is that the right thing to be looking for? 2. Uncompressed payload I'm not sure I understand what this means. Right now, my payload is filo. In the build, I see: dd conv=sync bs=196608 if=/bios/filo-0.4.2/filo.elf of=payload.block cat payload.block > romimage Oh, I guess you must mean this stuff: objcopy -O binary linuxbios_c linuxbios_payload.bin ./nrv2b e linuxbios_payload.bin linuxbios_payload.nrv2b So I guess there is some kind of compression going on there. Which method would be the right thing to do? I'll look at the shadow ram thing first then. Thanks. --- "Ronald G. Minnich" <rminnich(a)lanl.gov> wrote: > > > On Tue, 1 Mar 2005, ramesh bios wrote: > > > Strike that. The issue is somewhere with > > copy_pirq_routing_table. IE: why does the copy to > > f0000 fail. I had assumed that the 500 address was > an > > alternate location that the table was copied to. > So > > now, I'm looking at that f000 failure. > > > the copy to f0000 fails because shadow ram is not > set up. > > You can fix this one of two ways. One is to figure > out how to enable > shadow ram. The second is to make the payload > uncompressed. The copy will > still fail but linux will find the PIRQ table > anyway. > > ron > _______________________________________________ > Linuxbios mailing list > Linuxbios(a)clustermatic.org > http://www.clustermatic.org/mailman/listinfo/linuxbios > __________________________________ Do you Yahoo!? Yahoo! Mail - 250MB free storage. Do more. Manage less. http://info.mail.yahoo.com/mail_250

3 2

Re: Porting Linuxbios to Via P4m266A
by sherlock＠vsnl.com 01 Mar '05

01 Mar '05

On Wednesday 23 February 2005 23:37, Adam Sulmicki wrote: > well if you are determined and/or have funding there might be two > other ways. > > 1) I recall Ron describing rom-as-ram trick to get the emu86 > running and get the memory setting this way. Slow as molasses I'm > told. Any pointers? my mail archive does not throw up aything. > 2) get a pci debugger card. around $5k i think. can watch the pci > traffic on it to see what it writes as ram config. It does not > always work but when works it is pretty good. Jeez. That is a whole lot of money. Perhaps a HP LA might do the job. I might be able to get hold of one. Or rig up a couple of PALs to snoop on the bus - presuming that the load dont screw up the timing. rgds jtd

6 9

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot