coreboot November 2013

coreboot@coreboot.org

53 participants
117 discussions

autoconf warning while make crossgcc on debian 6.0.5 and 7.2.0
by Gelip 30 Nov '13

30 Nov '13

Hi. I tray use two debian version for coreboot project. While make crossgcc have some warnings in crossgcc-build.log (binutils): debian 6.0.5 binutils crossgcc-build.log: ------------------------------------------------------------------------- configure.ac:33: error: Please use exactly Autoconf 2.64 instead of 2.67. config/override.m4:12: _GCC_AUTOCONF_VERSION_CHECK is expanded from... configure.ac:33: the top level autom4te: /usr/bin/m4 failed with exit status: 1 ------------------------------------------------------------------------- debian 7.2.0 binutils crossgcc-build.log: ------------------------------------------------------------------------- ./buildgcc: line 453: autoconf: command not found ------------------------------------------------------------------------- but in both operating systems build ends success. Commands make menuconfig and make working OK and build coreboot.rom Does this have any impact on the project coreboot? Can this just to ignore?

1 0

Re: [coreboot] looking for a good, small, low power, portable board
by James Cloos 30 Nov '13

30 Nov '13

>>>>> "rm" == ron minnich <rminnich(a)gmail.com> writes: rm> The hudson chip has an rtl8139? That is surprising. That's a very old part. Sorry; I misread you post. Not a 39, no. I thought I read 8169, which is the gigabit chip. My understanding is that the ethernet IP on all of the AMD's APUs and SoCs should use linux's r8169 driver. -JimC -- James Cloos <cloos(a)jhcloos.com> OpenPGP: 1024D/ED7DAEA6

2 1

Re: [coreboot] Win9x on Abit BF6 with coreboot v4 (SeaBIOS master)
by Gelip 29 Nov '13

29 Nov '13

Yes, I use a PS2 keyboard and PS2 mouse.

1 0

Win9x on Abit BF6 with coreboot v4 (SeaBIOS master) working
by Gelip 29 Nov '13

29 Nov '13

Hi. I want report that possible boot/install Win9x OS's on motherboard Abit BF6 with coreboot v4 + SeaBIOS master. After first reboot need boot PC from other OS e.g MS-DOS without AUTOEXEC.BAT and CONFIG.SYS and delete one line from file C:\AUTOEXEC.BAT on Windows partition (default FAT32 C:) like this: ---------------------------------------------------- mode con cp prepare=((852) ega.cpi) mode con cp select=852 keyb pl,,keybrd4.sys <----------- DELETE THIS LINE MSCDEX.EXE /D:MSCD001 ---------------------------------------------------- This is keyboard driver. On Abit BF6 with coreboot v4 this causes PC hang. After delete this line OS's boot OK :-). On Win95 working driver GPU S3 Savage 3D (Fachman). On Win98SE working Reboot from menu Start. On both OS's some problems with install device drivers e.g. PCI or ISA.

2 1

Re: [coreboot] can I get this with coreboot?
by Laurent Lesage 29 Nov '13

29 Nov '13

Hi Andrew, no, I need the PCIe x16 slot, for a PCIe FPGA ArriaV board. Thanks Laurent On 29/11/13 18:05, Andrew Wu wrote: > Hi Laurent, > > 86Duino ONE has a PCIe slot, but it is a PCIe x1 slot, so maybe it > doesn't suit your needs. > > 2013/11/29 Laurent Lesage <laurent(a)2lconsult.be>: >> Hi all, >> >> Are there boards with coreboot pre-installed and PCIe available (I mean >> PCIe connector to connect a real PCIe board)? >> I know there are references on the coreboot web site, but if someone has >> some experience or an information which is not there, I'm interested. >> Sorry if it's a bit off topic. >> >> Laurent >> >> >> On 29/11/13 08:27, Andrew Wu wrote: >>> Hi Ron, >>> >>> Sorry for my late reply. >>> >>> Yes, 86Duino (both ZERO and ONE) is coreboot pre-installed. :D >>> >>> >>> 2013/11/29 ron minnich <rminnich(a)gmail.com>: >>>> change of question: if I buy this board, is coreboot the firmware that >>>> comes pre-installed? Given the price and the commits from DM&P I was >>>> hoping that was the case. >>>> >>>> ron >>>> >>>> On Thu, Nov 28, 2013 at 1:03 PM, Carl-Daniel Hailfinger >>>> <c-d.hailfinger.devel.2006(a)gmx.net> wrote: >>>>> Am 28.11.2013 02:00 schrieb ron minnich: >>>>>> http://www.cnx-software.com/2013/11/27/39-86duino-zero-is-an-x86-arduino-co… >>>>> AFAIK Rudolf Marek ported coreboot to that CPU. >>>>> >>>>> Regards, >>>>> Carl-Daniel >>>>> >>>>> -- >>>>> http://www.hailfinger.org/ >>>>> >>>>> >>>>> -- >>>>> coreboot mailing list: coreboot(a)coreboot.org >>>>> http://www.coreboot.org/mailman/listinfo/coreboot >>>> -- >>>> coreboot mailing list: coreboot(a)coreboot.org >>>> http://www.coreboot.org/mailman/listinfo/coreboot >> >> -- >> coreboot mailing list: coreboot(a)coreboot.org >> http://www.coreboot.org/mailman/listinfo/coreboot

1 0

Re: [coreboot] can I get this with coreboot?
by Laurent Lesage 29 Nov '13

29 Nov '13

Hi all, Are there boards with coreboot pre-installed and PCIe available (I mean PCIe connector to connect a real PCIe board)? I know there are references on the coreboot web site, but if someone has some experience or an information which is not there, I'm interested. Sorry if it's a bit off topic. Laurent On 29/11/13 08:27, Andrew Wu wrote: > Hi Ron, > > Sorry for my late reply. > > Yes, 86Duino (both ZERO and ONE) is coreboot pre-installed. :D > > > 2013/11/29 ron minnich <rminnich(a)gmail.com>: >> change of question: if I buy this board, is coreboot the firmware that >> comes pre-installed? Given the price and the commits from DM&P I was >> hoping that was the case. >> >> ron >> >> On Thu, Nov 28, 2013 at 1:03 PM, Carl-Daniel Hailfinger >> <c-d.hailfinger.devel.2006(a)gmx.net> wrote: >>> Am 28.11.2013 02:00 schrieb ron minnich: >>>> http://www.cnx-software.com/2013/11/27/39-86duino-zero-is-an-x86-arduino-co… >>> AFAIK Rudolf Marek ported coreboot to that CPU. >>> >>> Regards, >>> Carl-Daniel >>> >>> -- >>> http://www.hailfinger.org/ >>> >>> >>> -- >>> coreboot mailing list: coreboot(a)coreboot.org >>> http://www.coreboot.org/mailman/listinfo/coreboot >> -- >> coreboot mailing list: coreboot(a)coreboot.org >> http://www.coreboot.org/mailman/listinfo/coreboot

2 1

Re: [coreboot] looking for a good, small, low power, portable board
by Eugen Leitl 29 Nov '13

29 Nov '13

On Thu, Nov 28, 2013 at 09:58:54PM -0800, ron minnich wrote: > The hudson chip has an rtl8139? That is surprising. That's a very old > part. But I'll do some looking. I'm quite unfamiliar with those parts > :-) Does anyone know how Realtek RTL8111E hold up under load? I'm speculating on http://www.pcengines.ch/apu.htm for router purposes (notice it will run CoreBoot out of the box). Given it's an APU, one might achieve comparable to superior packet per second rates than Cavium, which is cheap and good http://www.ubnt.com/edgemax but full of proprietary blobs. > ron > > On Thu, Nov 28, 2013 at 10:26 AM, James Cloos <cloos(a)jhcloos.com> wrote: > >>>>>> "rm" == ron minnich <rminnich(a)gmail.com> writes: > > > > rm> does it have a pcie slot so I can put an e1000 in it? I can't figure > > rm> out it I can. > > > > If that is in reference to the new zotac aq01, the hudson chip thereon > > (part of amd's apu platform) has a realtek gig-ethernet. Should be the > > one you mentioned in the initial post. > > > > I eventually found: > > > > http://www.zotac.com/en/products/mini-pcs/zbox-nano-series/zbox-nano/produc… > > http://www.zotac.com/en/products/mini-pcs/zbox-nano-series/zbox-nano/produc… > > > > -JimC > > -- > > James Cloos <cloos(a)jhcloos.com> OpenPGP: 1024D/ED7DAEA6 > > -- > coreboot mailing list: coreboot(a)coreboot.org > http://www.coreboot.org/mailman/listinfo/coreboot

2 1

Re: [coreboot] can I get this with coreboot?
by Andrew Wu 29 Nov '13

29 Nov '13

Hi Ron, Sorry for my late reply. Yes, 86Duino (both ZERO and ONE) is coreboot pre-installed. :D 2013/11/29 ron minnich <rminnich(a)gmail.com>: > change of question: if I buy this board, is coreboot the firmware that > comes pre-installed? Given the price and the commits from DM&P I was > hoping that was the case. > > ron > > On Thu, Nov 28, 2013 at 1:03 PM, Carl-Daniel Hailfinger > <c-d.hailfinger.devel.2006(a)gmx.net> wrote: >> Am 28.11.2013 02:00 schrieb ron minnich: >>> http://www.cnx-software.com/2013/11/27/39-86duino-zero-is-an-x86-arduino-co… >> >> AFAIK Rudolf Marek ported coreboot to that CPU. >> >> Regards, >> Carl-Daniel >> >> -- >> http://www.hailfinger.org/ >> >> >> -- >> coreboot mailing list: coreboot(a)coreboot.org >> http://www.coreboot.org/mailman/listinfo/coreboot > > -- > coreboot mailing list: coreboot(a)coreboot.org > http://www.coreboot.org/mailman/listinfo/coreboot

1 0

Re: [coreboot] looking for a good, small, low power, portable board
by James Cloos 29 Nov '13

29 Nov '13

>>>>> "rm" == ron minnich <rminnich(a)gmail.com> writes: rm> does it have a pcie slot so I can put an e1000 in it? I can't figure rm> out it I can. If that is in reference to the new zotac aq01, the hudson chip thereon (part of amd's apu platform) has a realtek gig-ethernet. Should be the one you mentioned in the initial post. I eventually found: http://www.zotac.com/en/products/mini-pcs/zbox-nano-series/zbox-nano/produc… http://www.zotac.com/en/products/mini-pcs/zbox-nano-series/zbox-nano/produc… -JimC -- James Cloos <cloos(a)jhcloos.com> OpenPGP: 1024D/ED7DAEA6

2 1

Re: [coreboot] can I get this with coreboot?
by Carl-Daniel Hailfinger 29 Nov '13

29 Nov '13

Am 28.11.2013 02:00 schrieb ron minnich: > http://www.cnx-software.com/2013/11/27/39-86duino-zero-is-an-x86-arduino-co… AFAIK Rudolf Marek ported coreboot to that CPU. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot November 2013