coreboot November 2007

coreboot@coreboot.org

75 participants
397 discussions

[LinuxBIOS] r2977 build service
by LinuxBIOS information 22 Nov '07

22 Nov '07

Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS. The developer "uwe" checked in revision 2977 to the LinuxBIOS source repository and caused the following changes: Change Log: Dump support for the SMSC LPC47B27x (trivial). Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Build Log: Compilation of amd:serengeti_cheetah is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2977&device=serengeti_che… Compilation of asus:a8v-e_se is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2977&device=a8v-e_se&vend… Compilation of iwill:dk8_htx is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2977&device=dk8_htx&vendo… Compilation of msi:ms9185 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2977&device=ms9185&vendor… Compilation of msi:ms9282 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2977&device=ms9282&vendor… Compilation of supermicro:h8dmr is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2977&device=h8dmr&vendor=… If something broke during this checkin please be a pain in uwe's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system

1 0

[LinuxBIOS] r2977 - trunk/util/superiotool
by svn＠openbios.org 22 Nov '07

22 Nov '07

Author: uwe Date: 2007-11-22 04:36:18 +0100 (Thu, 22 Nov 2007) New Revision: 2977 Modified: trunk/util/superiotool/smsc.c Log: Dump support for the SMSC LPC47B27x (trivial). Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/util/superiotool/smsc.c =================================================================== --- trunk/util/superiotool/smsc.c 2007-11-20 14:11:24 UTC (rev 2976) +++ trunk/util/superiotool/smsc.c 2007-11-22 03:36:18 UTC (rev 2977) @@ -206,6 +206,39 @@ RSVD,RSVD,RSVD,RSVD,EOT}}, {EOT}}}, {0x51, "LPC47B27x", { + {NOLDN, NULL, + {0x03,0x20,0x21,0x22,0x23,0x24,0x26,0x27,0x28, + 0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT}, + {RSVD,0x51,NANA,0x00,0x00,0x04,MISC,MISC,RSVD, + NANA,NANA,NANA,NANA,NANA,NANA,EOT}}, + {0x0, "Floppy", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,0xf5, + EOT}, + {0x00,0x03,0xf0,0x06,0x02,0x0e,0x00,0xff,0x00,0x00, + EOT}}, + {0x3, "Parallel port", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,EOT}, + {0x00,0x00,0x00,0x00,0x04,0x3c,0x00,EOT}}, + {0x4, "COM1", + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x00,0x00,0x00,0x00,0x00,EOT}}, + {0x5, "COM2", + {0x30,0x60,0x61,0x62,0x63,0x70,0x74,0xf0,0xf1,0xf2, + EOT}, + {NANA,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x02,0x03, + EOT}}, + {0x7, "Keyboard", + {0x30,0x70,0x72,0xf0,EOT}, + {0x00,0x00,0x00,0x00,EOT}}, + {0x9, "Game port", + {0x30,0x60,0x61,EOT}, + {0x00,0x00,0x00,EOT}}, + {0xa, "Power-management events (PME)", + {0x30,0x60,0x61,0xf0,0xf1,EOT}, + {0x00,0x00,0x00,NANA,NANA,EOT}}, + {0xb, "MIDI port (MPU-401)", + {0x30,0x60,0x61,0x70,EOT}, + {0x00,0x03,0x30,0x05,EOT}}, {EOT}}}, {0x52, "LPC47B37x", { {EOT}}},

1 0

[LinuxBIOS] Fwd: Could original VGA BIOS be responsible for long timeout before LinuxBIOS kicks in?
by Corey Osgood 22 Nov '07

22 Nov '07

Oops, forgot to CC the list. -Corey ---------- Forwarded message ---------- From: Corey Osgood <corey.osgood(a)gmail.com> Date: Nov 20, 2007 7:59 PM Subject: Re: [LinuxBIOS] Could original VGA BIOS be responsible for long timeout before LinuxBIOS kicks in? To: Coquelicot <coquelicot408(a)gmail.com> On 11/20/07, Coquelicot <coquelicot408(a)gmail.com> wrote: > > Hi all, > > what can be responsible for long delay before starting LinuxBIOS? I > have it on VIA EPIA M-II with LB preppended by original VGA bios > extracted from the original BIOS. The delay is ~20 seconds before I > get first message on serial console (..."In auto.c:main()" messages). > > Correct me if I am wrong: do I need VGA BIOS at all? I want my booting > Linux kernel to use framebuffer but I guess that original VGA BIOS is > not really needed for that, just to be able to "control" LB/FILO from > the local console, right? If I had to guess, I'd say your problem is not with the VGA bios, but with ram that doesn't work quite right with the current code for the cle266. Can you try a different ram stick (of a different size/timings) and see if you get the same results? -Corey

3 3

[LinuxBIOS] r58 - in buildrom-devel: . bin config/payloads config/platforms packages/busybox packages/kernel packages/linuxbios packages/linuxbios/patches packages/uclibc scripts skeleton
by svn＠openbios.org 22 Nov '07

22 Nov '07

Author: jcrouse Date: 2007-11-22 00:07:15 +0100 (Thu, 22 Nov 2007) New Revision: 58 Modified: buildrom-devel/Config.in buildrom-devel/bin/checkrom.sh buildrom-devel/config/payloads/Config.in buildrom-devel/config/platforms/Config.in buildrom-devel/config/platforms/alix1c.conf buildrom-devel/config/platforms/db800.conf buildrom-devel/config/platforms/dbe61.conf buildrom-devel/config/platforms/ga-2761gxdk.conf buildrom-devel/config/platforms/m57sli.conf buildrom-devel/config/platforms/msm800sev.conf buildrom-devel/config/platforms/norwich.conf buildrom-devel/config/platforms/platforms.conf buildrom-devel/config/platforms/serengeti_cheetah.conf buildrom-devel/config/platforms/tyan-s2882.conf buildrom-devel/config/platforms/tyan-s2891.conf buildrom-devel/packages/busybox/busybox.mk buildrom-devel/packages/kernel/kernel.inc buildrom-devel/packages/kernel/m57sli-kernel.mk buildrom-devel/packages/kernel/serengeti_cheetah-kernel.mk buildrom-devel/packages/kernel/tyan-s2882-kernel.mk buildrom-devel/packages/kernel/tyan-s2891-kernel.mk buildrom-devel/packages/linuxbios/generic-linuxbios.mk buildrom-devel/packages/linuxbios/linuxbios.inc buildrom-devel/packages/linuxbios/patches/s-c-buildrom-payload.patch buildrom-devel/packages/uclibc/uclibc.mk buildrom-devel/scripts/Build.settings buildrom-devel/scripts/Makefile.lab buildrom-devel/skeleton/device.txt Log: [BUILDROM]] 32/64 bit support Adds support for building both 32 and 64 bit LAB images from within buildrom. Many changes by Ward Vandewege, Myles Watson and Jordan Crouse. Signed-off-by: Myles Watson <myles(a)pel.cs.byu.edu> Acked-by: Jordan Crouse <jordan.crouse(a)amd.com> Acked-by: Ward Vandewege <ward(a)gnu.org> Modified: buildrom-devel/Config.in =================================================================== --- buildrom-devel/Config.in 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/Config.in 2007-11-21 23:07:15 UTC (rev 58) @@ -62,9 +62,22 @@ bool default n -config PAYLOAD +config PLATFORM_SUPPORT_64BIT bool default n +config PAYLOAD_64BIT + bool + default n + +config TARGET_32BIT + bool + depends !TARGET_64BIT + default y + +config TARGET_64BIT + bool + default n + source config/platforms/Config.in source config/payloads/Config.in Modified: buildrom-devel/bin/checkrom.sh =================================================================== --- buildrom-devel/bin/checkrom.sh 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/bin/checkrom.sh 2007-11-21 23:07:15 UTC (rev 58) @@ -1,13 +1,8 @@ #!/bin/sh size=`du -b $1 | cut -f1` -delta=`expr 884736 - $size` -echo "Bytes left in ROM: $delta" +echo "******************" +echo "Payload takes $size Bytes (`expr $size / 1024` KBytes) in ROM:" +echo "******************" -if [ $delta -lt 0 ]; then - echo "ERROR! ERROR! ERROR!" - echo "The ELF image $1 is too big!" - exit -1 -fi - exit 0 Modified: buildrom-devel/config/payloads/Config.in =================================================================== --- buildrom-devel/config/payloads/Config.in 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/config/payloads/Config.in 2007-11-21 23:07:15 UTC (rev 58) @@ -11,42 +11,54 @@ config PAYLOAD_CUSTOM bool "Custom Payload" - select PAYLOAD config PAYLOAD_ETHERBOOT depends !PLATFORM_M57SLI depends !PLATFORM_TYAN_S2891 bool "Etherboot" - select PAYLOAD config PAYLOAD_FILO bool "FILO" - select PAYLOAD config PAYLOAD_KERNEL depends !PLATFORM_GA_2761GXDK bool "Linux kernel payload" - select PAYLOAD + select PAYLOAD_64BIT config PAYLOAD_LAB depends !PLATFORM_GA_2761GXDK bool "Linux As Bootloader" - select PAYLOAD + select PAYLOAD_64BIT #config PAYLOAD_OFW # depends !PLATFORM_M57SLI # depends !PLATFORM_TYAN_S2891 # bool "OpenFirmware" -# select PAYLOAD config PAYLOAD_MEMTEST depends !PLATFORM_M57SLI depends !PLATFORM_TYAN_S2891 bool "Memtest86+" - select PAYLOAD endchoice +choice + prompt "Desired target architecture" + depends PLATFORM_SUPPORT_64BIT && PAYLOAD_64BIT + default CHOOSE_32BIT + help + Chose the target architecture for the payload. + +config CHOOSE_64BIT + bool "x86_64 (64 bit)" + select TARGET_64BIT + +config CHOOSE_32BIT + bool "x86 (32 bit)" + select TARGET_32BIT + +endchoice + menu "Custom Payload" depends PAYLOAD_CUSTOM config CUSTOM_PAYLOAD Modified: buildrom-devel/config/platforms/Config.in =================================================================== --- buildrom-devel/config/platforms/Config.in 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/config/platforms/Config.in 2007-11-21 23:07:15 UTC (rev 58) @@ -60,25 +60,31 @@ bool "GIGABYTE GA-M57SLI-S4" depends VENDOR_GIGABYTE select PLATFORM + select PLATFORM_SUPPORT_64BIT config PLATFORM_GA_2761GXDK bool "GIGABYTE GA-2761GXDK" depends VENDOR_GIGABYTE select PLATFORM + select PLATFORM_SUPPORT_64BIT config PLATFORM_TYAN_S2882 bool "Tyan S2882" depends VENDOR_TYAN select PLATFORM + select PLATFORM_SUPPORT_64BIT config PLATFORM_TYAN_S2891 bool "Tyan S2891" depends VENDOR_TYAN select PLATFORM + select PLATFORM_SUPPORT_64BIT config PLATFORM_SERENGETI_CHEETAH bool "AMD Serengeti-Cheetah" depends VENDOR_AMD select PLATFORM + select PLATFORM_SUPPORT_64BIT + endchoice endmenu Modified: buildrom-devel/config/platforms/alix1c.conf =================================================================== --- buildrom-devel/config/platforms/alix1c.conf 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/config/platforms/alix1c.conf 2007-11-21 23:07:15 UTC (rev 58) @@ -17,7 +17,7 @@ # kernel configuration (for LAB) KERNEL_VERSION=2.6.20.2 -KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/alix1c-defconfig +KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-alix1c UCLIBC_ARCH=i386 # Etherboot configuration Modified: buildrom-devel/config/platforms/db800.conf =================================================================== --- buildrom-devel/config/platforms/db800.conf 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/config/platforms/db800.conf 2007-11-21 23:07:15 UTC (rev 58) @@ -20,7 +20,7 @@ # Use the same settings as the Norwich platform KERNEL_VERSION=2.6.20.2 -KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/norwich-defconfig +KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-norwich UCLIBC_ARCH=i386 # Etherboot configuration Modified: buildrom-devel/config/platforms/dbe61.conf =================================================================== --- buildrom-devel/config/platforms/dbe61.conf 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/config/platforms/dbe61.conf 2007-11-21 23:07:15 UTC (rev 58) @@ -19,7 +19,7 @@ # kernel configuration (for LAB) KERNEL_VERSION=2.6.20.2 -KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/norwich-defconfig +KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-norwich UCLIBC_ARCH=i386 # Etherboot configuration Modified: buildrom-devel/config/platforms/ga-2761gxdk.conf =================================================================== --- buildrom-devel/config/platforms/ga-2761gxdk.conf 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/config/platforms/ga-2761gxdk.conf 2007-11-21 23:07:15 UTC (rev 58) @@ -6,8 +6,13 @@ STRIP=strip AS=as +ifeq ($(CONFIG_TARGET_64BIT),y) +TARGET_ARCH=x86_64 +CFLAGS_platform = +else TARGET_ARCH=i686 -CFLAGS_platform = -m32 +CFLAGS_platform = +endif # Targets @@ -20,7 +25,7 @@ # Disable for now - I don't know the right kernel for this platform #KERNEL_VERSION=2.6.22.2 #KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/ -UCLIBC_ARCH=i386 +#UCLIBC_ARCH=$(TARGET_ARCH) # Etherboot configuration ETHERBOOT_ARCH=i386 Modified: buildrom-devel/config/platforms/m57sli.conf =================================================================== --- buildrom-devel/config/platforms/m57sli.conf 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/config/platforms/m57sli.conf 2007-11-21 23:07:15 UTC (rev 58) @@ -6,8 +6,13 @@ STRIP=strip AS=as +ifeq ($(CONFIG_TARGET_64BIT),y) +TARGET_ARCH=x86_64 +CFLAGS_platform = +else TARGET_ARCH=i686 -CFLAGS_platform = -m32 +CFLAGS_platform = +endif # Targets @@ -17,9 +22,15 @@ # kernel configuration (for LAB) KERNEL_VERSION=2.6.22.2 -KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/m57sli-defconfig -UCLIBC_ARCH=i386 +ifeq ($(CONFIG_TARGET_64BIT),y) +$(error You must specify a kernel configuration for 64 bit) +else +KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-m57sli +endif + +#UCLIBC_ARCH=$(TARGET_ARCH) + # Etherboot configuration ETHERBOOT_ARCH=i386 Modified: buildrom-devel/config/platforms/msm800sev.conf =================================================================== --- buildrom-devel/config/platforms/msm800sev.conf 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/config/platforms/msm800sev.conf 2007-11-21 23:07:15 UTC (rev 58) @@ -18,7 +18,7 @@ # kernel configuration (for LAB) KERNEL_VERSION=2.6.20.2 -KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/msm800sev-defconfig +KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-msm800sev UCLIBC_ARCH=i386 # Etherboot configuration Modified: buildrom-devel/config/platforms/norwich.conf =================================================================== --- buildrom-devel/config/platforms/norwich.conf 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/config/platforms/norwich.conf 2007-11-21 23:07:15 UTC (rev 58) @@ -18,7 +18,7 @@ # kernel configuration (for LAB) KERNEL_VERSION=2.6.20.2 -KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/norwich-defconfig +KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-norwich UCLIBC_ARCH=i386 # Etherboot configuration Modified: buildrom-devel/config/platforms/platforms.conf =================================================================== --- buildrom-devel/config/platforms/platforms.conf 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/config/platforms/platforms.conf 2007-11-21 23:07:15 UTC (rev 58) @@ -15,6 +15,7 @@ PLATFORM-$(CONFIG_PLATFORM_TYAN_S2882) = tyan-s2882.conf PLATFORM-$(CONFIG_PLATFORM_TYAN_S2891) = tyan-s2891.conf PLATFORM-$(CONFIG_PLATFORM_SERENGETI_CHEETAH) = serengeti_cheetah.conf +PLATFORM-$(CONFIG_PLATFORM_SERENGETI_CHEETAH_64) = serengeti_cheetah-x86_64.conf PLATFORM-$(CONFIG_PLATFORM_GA_2761GXDK) = ga-2761gxdk.conf include $(CONFIG_DIR)/platforms/$(PLATFORM-y) Modified: buildrom-devel/config/platforms/serengeti_cheetah.conf =================================================================== --- buildrom-devel/config/platforms/serengeti_cheetah.conf 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/config/platforms/serengeti_cheetah.conf 2007-11-21 23:07:15 UTC (rev 58) @@ -7,20 +7,36 @@ STRIP=strip AS=as -TARGET_ARCH=i586 +ifeq ($(CONFIG_TARGET_64BIT),y) +TARGET_ARCH=x86_64 CFLAGS_platform = +else +TARGET_ARCH=i686 +CFLAGS_platform = +endif # Targets KERNEL_MK=$(PACKAGE_DIR)/kernel/serengeti_cheetah-kernel.mk -LINUXBIOS_MK=$(PACKAGE_DIR)/linuxbios/generic-linuxbios.mk +LINUXBIOS_MK=$(PACKAGE_DIR)/linuxbios/serengeti_cheetah.mk # kernel configuration (for LAB) +ifeq ($(CONFIG_TARGET_64BIT),y) +KERNEL_VERSION=2.6.22.2 +KERNEL_MK=$(PACKAGE_DIR)/kernel/serengeti_cheetah-kernel-x86_64.mk +KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-serengeti_cheetah-x86_64 +BUSYBOX_CONFIG=defconfig-serengeti_cheetah-x86_64 +UCLIBC_VER=0.9.29 +UCLIBC_CONFIG=defconfig-x86_64 +else KERNEL_VERSION=2.6.20.2 -KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/serengeti_cheetah-defconfig -UCLIBC_ARCH=i386 +KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-serengeti_cheetah +UCLIBC_VER=0.9.28 +endif +#UCLIBC_ARCH=$(TARGET_ARCH) + # Etherboot configuration ETHERBOOT_ARCH=i386 @@ -30,7 +46,7 @@ LINUXBIOS_BOARD=serengeti_cheetah LINUXBIOS_CONFIG=Config.lb LINUXBIOS_TDIR=serengeti_cheetah -LINUXBIOS_TAG=2880 +LINUXBIOS_TAG=2950 LINUXBIOS_ROM_NAME=serengeti_cheetah.rom # FILO configuration Modified: buildrom-devel/config/platforms/tyan-s2882.conf =================================================================== --- buildrom-devel/config/platforms/tyan-s2882.conf 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/config/platforms/tyan-s2882.conf 2007-11-21 23:07:15 UTC (rev 58) @@ -6,8 +6,13 @@ STRIP=strip AS=as +ifeq ($(CONFIG_TARGET_64BIT), y) +TARGET_ARCH=x86_64 +CFLAGS_platform = +else TARGET_ARCH=i686 -CFLAGS_platform = -m32 +CFLAGS_platform = +endif # Targets @@ -17,9 +22,15 @@ # kernel configuration (for LAB) KERNEL_VERSION=2.6.22.2 -KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/tyan-s2882-defconfig -UCLIBC_ARCH=i386 +ifeq ($(CONFIG_TARGET_64BIT), y) +$(error You must specify a kernel configuration for 64 bit) +else +KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-tyan-s2882 +endif + +#UCLIBC_ARCH=i386 + # Etherboot configuration ETHERBOOT_ARCH=i386 Modified: buildrom-devel/config/platforms/tyan-s2891.conf =================================================================== --- buildrom-devel/config/platforms/tyan-s2891.conf 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/config/platforms/tyan-s2891.conf 2007-11-21 23:07:15 UTC (rev 58) @@ -6,8 +6,13 @@ STRIP=strip AS=as +ifeq ($(CONFIG_TARGET_64BIT), y) +TARGET_ARCH=x86_64 +CFLAGS_platform = +else TARGET_ARCH=i686 -CFLAGS_platform = -m32 +CFLAGS_platform = +endif # Targets @@ -17,9 +22,15 @@ # kernel configuration (for LAB) KERNEL_VERSION=2.6.22.2 -KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/tyan-s2891-defconfig -UCLIBC_ARCH=i386 +ifeq ($(CONFIG_TARGET_64BIT),y) +$(error You must specify a kernel configuration for 64 bit) +else +KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-tyan-s2891 +endif + +#UCLIBC_ARCH=i386 + # Etherboot configuration ETHERBOOT_ARCH=i386 Modified: buildrom-devel/packages/busybox/busybox.mk =================================================================== --- buildrom-devel/packages/busybox/busybox.mk 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/packages/busybox/busybox.mk 2007-11-21 23:07:15 UTC (rev 58) @@ -15,6 +15,8 @@ BUSYBOX_INSTALL_LOG=$(BUSYBOX_LOG_DIR)/install.log endif +BUSYBOX_CONFIG ?= defconfig + $(SOURCE_DIR)/$(BUSYBOX_SOURCE): @ mkdir -p $(SOURCE_DIR) @ wget -P $(SOURCE_DIR) $(BUSYBOX_URL)/$(BUSYBOX_SOURCE) @@ -30,7 +32,7 @@ @ touch $@ $(BUSYBOX_SRC_DIR)/.config: $(BUSYBOX_STAMP_DIR)/.patched - @ cp $(PACKAGE_DIR)/busybox/conf/defconfig $@ + @ cp $(PACKAGE_DIR)/busybox/conf/$(BUSYBOX_CONFIG) $@ $(BUSYBOX_SRC_DIR)/busybox: $(BUSYBOX_SRC_DIR)/.config @ echo "Building busybox..." Modified: buildrom-devel/packages/kernel/kernel.inc =================================================================== --- buildrom-devel/packages/kernel/kernel.inc 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/packages/kernel/kernel.inc 2007-11-21 23:07:15 UTC (rev 58) @@ -7,6 +7,14 @@ KERNEL_STAMP_DIR=$(KERNEL_DIR)/stamps KERNEL_LOG_DIR=$(KERNEL_DIR)/logs +ifeq ($(CONFIG_TARGET_64BIT),y) +KERNEL_BZIMAGE=$(KERNEL_SRC_DIR)/arch/x86_64/boot/bzImage +KERNEL_BUILD_ARCH=x86_64 +else +KERNEL_BZIMAGE=$(KERNEL_SRC_DIR)/arch/i386/boot/bzImage +KERNEL_BUILD_ARCH=i386 +endif + ifeq ($(CONFIG_VERBOSE),y) KERNEL_FETCH_LOG=/dev/stdout KERNEL_BUILD_LOG=/dev/stdout @@ -42,23 +50,23 @@ $(KERNEL_SRC_DIR)/.config: $(KERNEL_STAMP_DIR)/.patched @ cat $(KERNEL_CONFIG) | sed -e s:^CONFIG_LOCALVERSION=.*:CONFIG_LOCALVERSION=\"$(ROM_VERSION)\": > $(KERNEL_SRC_DIR)/.config -$(KERNEL_SRC_DIR)/arch/i386/boot/bzImage: $(KERNEL_SRC_DIR)/.config +$(KERNEL_BZIMAGE): $(KERNEL_SRC_DIR)/.config @ echo "Building kernel..." - @ $(MAKE) -C $(KERNEL_SRC_DIR) ARCH=i386 \ + @ $(MAKE) -C $(KERNEL_SRC_DIR) ARCH=$(KERNEL_BUILD_ARCH) \ KERNEL_CC="$(CC)" KERNEL_LD="$(LD)" > $(KERNEL_BUILD_LOG) 2>&1 -$(OUTPUT_DIR)/bzImage: $(KERNEL_SRC_DIR)/arch/i386/boot/bzImage +$(OUTPUT_DIR)/bzImage: $(KERNEL_BZIMAGE) @ install -d $(OUTPUT_DIR) @ install -m 0644 $< $@ -$(OUTPUT_DIR)/vmlinux: $(KERNEL_SRC_DIR)/arch/i386/boot/bzImage +$(OUTPUT_DIR)/vmlinux: $(KERNEL_BZIMAGE) @ install -d $(OUTPUT_DIR) @ install -m 0644 $(KERNEL_SRC_DIR)/vmlinux $@ $(KERNEL_STAMP_DIR)/.headers: $(KERNEL_SRC_DIR)/.config $(STAGING_DIR)/host/bin/unifdef @ echo "Installing kernel headers..." @( export PATH=$(PATH):$(STAGING_DIR)/host/bin; \ - $(MAKE) -C $(KERNEL_SRC_DIR) ARCH=i386 \ + $(MAKE) -C $(KERNEL_SRC_DIR) ARCH=$(KERNEL_BUILD_ARCH) \ INSTALL_HDR_PATH=$(STAGING_DIR)/ headers_install > $(KERNEL_INSTALL_LOG) 2>&1) @ touch $@ Modified: buildrom-devel/packages/kernel/m57sli-kernel.mk =================================================================== --- buildrom-devel/packages/kernel/m57sli-kernel.mk 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/packages/kernel/m57sli-kernel.mk 2007-11-21 23:07:15 UTC (rev 58) @@ -2,8 +2,9 @@ KERNEL_URL=http://kernel.org/pub/linux/kernel/v2.6/ KERNEL_SOURCE=linux-$(KERNEL_VERSION).tar.bz2 -KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-m57sli +# KERNEL_CONFIG is defined in the platform configuration + TINY_URL=http://elinux.org/images/0/0e/ TINY_SOURCE=Tiny-quilt-2.6.22.1-1.tar.gz TINY_DIR=$(KERNEL_DIR)/tiny/patches Modified: buildrom-devel/packages/kernel/serengeti_cheetah-kernel.mk =================================================================== --- buildrom-devel/packages/kernel/serengeti_cheetah-kernel.mk 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/packages/kernel/serengeti_cheetah-kernel.mk 2007-11-21 23:07:15 UTC (rev 58) @@ -2,12 +2,9 @@ KERNEL_URL=http://kernel.org/pub/linux/kernel/v2.6/ KERNEL_SOURCE=linux-$(KERNEL_VERSION).tar.bz2 -KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-serengeti_cheetah -#TINY_DIR=$(PACKAGE_DIR)/kernel/patches/tiny -#KERNEL_PATCHES += $(shell ls $(TINY_DIR)/*.patch) +# Kernel config is set in the platform configuration - $(SOURCE_DIR)/$(KERNEL_SOURCE): @ mkdir -p $(SOURCE_DIR) @ wget -P $(SOURCE_DIR) $(KERNEL_URL)/$(KERNEL_SOURCE) Modified: buildrom-devel/packages/kernel/tyan-s2882-kernel.mk =================================================================== --- buildrom-devel/packages/kernel/tyan-s2882-kernel.mk 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/packages/kernel/tyan-s2882-kernel.mk 2007-11-21 23:07:15 UTC (rev 58) @@ -2,8 +2,9 @@ KERNEL_URL=http://kernel.org/pub/linux/kernel/v2.6/ KERNEL_SOURCE=linux-$(KERNEL_VERSION).tar.bz2 -KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-tyan-s2882 +# KERNEL_CONFIG is defined in the platform configuration + TINY_URL=http://elinux.org/images/0/0e/ TINY_SOURCE=Tiny-quilt-2.6.22.1-1.tar.gz TINY_DIR=$(KERNEL_DIR)/tiny/patches Modified: buildrom-devel/packages/kernel/tyan-s2891-kernel.mk =================================================================== --- buildrom-devel/packages/kernel/tyan-s2891-kernel.mk 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/packages/kernel/tyan-s2891-kernel.mk 2007-11-21 23:07:15 UTC (rev 58) @@ -2,8 +2,9 @@ KERNEL_URL=http://kernel.org/pub/linux/kernel/v2.6/ KERNEL_SOURCE=linux-$(KERNEL_VERSION).tar.bz2 -KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-tyan-s2891 +# KERNEL_CONFIG is defined in the platform configuration + TINY_URL=http://elinux.org/images/0/0e/ TINY_SOURCE=Tiny-quilt-2.6.22.1-1.tar.gz TINY_DIR=$(KERNEL_DIR)/tiny/patches Modified: buildrom-devel/packages/linuxbios/generic-linuxbios.mk =================================================================== --- buildrom-devel/packages/linuxbios/generic-linuxbios.mk 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/packages/linuxbios/generic-linuxbios.mk 2007-11-21 23:07:15 UTC (rev 58) @@ -7,20 +7,11 @@ endif LINUXBIOS_BASE_DIR=svn -LINUXBIOS_URL=svn://openbios.org/repos/trunk/LinuxBIOSv2 +LINUXBIOS_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2 LINUXBIOS_TARBALL=linuxbios-svn-$(LINUXBIOS_TAG).tar.gz LINUXBIOS_PAYLOAD_TARGET=$(LINUXBIOS_BUILD_DIR)/payload.elf TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom -# Make sure we have the tools we need to accomplish this -HAVE_IASL:=$(call find-tool,iasl) - -ifeq ($(HAVE_IASL),n) -$(error To build LinuxBIOS, you need to install the 'iasl' tool) -endif - -LINUXBIOS_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/s-c-buildrom-payload.patch - include $(PACKAGE_DIR)/linuxbios/linuxbios.inc $(SOURCE_DIR)/$(LINUXBIOS_TARBALL): Modified: buildrom-devel/packages/linuxbios/linuxbios.inc =================================================================== --- buildrom-devel/packages/linuxbios/linuxbios.inc 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/packages/linuxbios/linuxbios.inc 2007-11-21 23:07:15 UTC (rev 58) @@ -68,7 +68,7 @@ @ touch $@ $(LINUXBIOS_STAMP_DIR)/.configured: $(LINUXBIOS_STAMP_DIR)/.patched - @ echo "Building target config file..." + @ echo "Building target..." @( cd $(LINUXBIOS_TARGET_DIR); \ ./buildtarget $(LINUXBIOS_CONFIG_NAME) > $(LINUXBIOS_CONFIG_LOG) 2>&1) @ touch $@ Modified: buildrom-devel/packages/linuxbios/patches/s-c-buildrom-payload.patch =================================================================== --- buildrom-devel/packages/linuxbios/patches/s-c-buildrom-payload.patch 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/packages/linuxbios/patches/s-c-buildrom-payload.patch 2007-11-21 23:07:15 UTC (rev 58) @@ -1,45 +0,0 @@ -Index: svn/targets/amd/serengeti_cheetah/Config.lb -=================================================================== ---- svn.orig/targets/amd/serengeti_cheetah/Config.lb -+++ svn/targets/amd/serengeti_cheetah/Config.lb -@@ -29,7 +29,7 @@ romimage "normal" - # payload ../../../payloads/tg3.zelf - # payload ../../../../payloads/tg3_vga.zelf - # payload ../../../../payloads/tg3--filo_hda2_vga.zelf -- payload ../../../../payloads/tg3--filo_hda2_vga_5.4.1.zelf -+# payload ../../../../payloads/tg3--filo_hda2_vga_5.4.1.zelf - # payload ../../../../payloads/e1000_vga.zelf - # payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf - # payload ../../../payloads/tg3_com2.zelf -@@ -38,6 +38,7 @@ romimage "normal" - # payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf - # payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf - # payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf -+ payload ../payload.elf - end - - romimage "fallback" -@@ -62,7 +63,7 @@ romimage "fallback" - # payload ../../../../payloads/filo_hda.zelf - # payload ../../../../payloads/tg3--filo_hda2_vga.zelf - # payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf -- payload ../../../../payloads/tg3--filo_hda2_vga_5.4.1.zelf -+# payload ../../../../payloads/tg3--filo_hda2_vga_5.4.1.zelf - # payload ../../../../payloads/filo_hda2_novga.zelf - # payload ../../../payloads/tg3_com2.zelf - # payload ../../../payloads/e1000--filo.zelf -@@ -70,6 +71,7 @@ romimage "fallback" - # payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf - # payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf - # payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf -+ payload ../payload.elf - end - - romimage "failover" -@@ -81,5 +83,5 @@ romimage "failover" - end - - --buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" "failover" -+buildrom ./serengeti_cheetah.rom ROM_SIZE "normal" "fallback" "failover" - #buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" Modified: buildrom-devel/packages/uclibc/uclibc.mk =================================================================== --- buildrom-devel/packages/uclibc/uclibc.mk 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/packages/uclibc/uclibc.mk 2007-11-21 23:07:15 UTC (rev 58) @@ -1,7 +1,18 @@ +# Defaults, if not set in the platform config +ifeq ($(CONFIG_TARGET_64BIT),y) +UCLIBC_VER ?= 0.9.29 +UCLIBC_ARCH ?= x86_64 +UCLIBC_CONFIG ?= defconfig-x86_64 +else +UCLIBC_VER ?= 0.9.28 +UCLIBC_ARCH ?= i386 +UCLIBC_CONFIG ?= defconfig +endif + UCLIBC_URL=http://www.uclibc.org/downloads -UCLIBC_SOURCE=uClibc-0.9.28.tar.bz2 +UCLIBC_SOURCE=uClibc-$(UCLIBC_VER).tar.bz2 UCLIBC_DIR=$(BUILD_DIR)/uclibc -UCLIBC_SRC_DIR=$(UCLIBC_DIR)/uClibc-0.9.28 +UCLIBC_SRC_DIR=$(UCLIBC_DIR)/uClibc-$(UCLIBC_VER) UCLIBC_STAMP_DIR=$(UCLIBC_DIR)/stamps UCLIBC_LOG_DIR=$(UCLIBC_DIR)/logs @@ -13,9 +24,6 @@ UCLIBC_INSTALL_LOG=$(UCLIBC_LOG_DIR)/install.log endif -# Default, if its not set in the platform config -UCLIBC_ARCH ?= $(TARGET_ARCH) - $(SOURCE_DIR)/$(UCLIBC_SOURCE): @ mkdir -p $(SOURCE_DIR) @ wget -P $(SOURCE_DIR) $(UCLIBC_URL)/$(UCLIBC_SOURCE) @@ -26,7 +34,7 @@ @ touch $@ $(UCLIBC_SRC_DIR)/.config: $(UCLIBC_STAMP_DIR)/.unpacked - @ cp $(PACKAGE_DIR)/uclibc/conf/defconfig $(UCLIBC_SRC_DIR)/.config + @ cat $(PACKAGE_DIR)/uclibc/conf/$(UCLIBC_CONFIG) | sed -e s:^KERNEL_HEADERS=.*:KERNEL_HEADERS=\"$(KERNEL_SRC_DIR)/include\": > $(UCLIBC_SRC_DIR)/.config $(UCLIBC_SRC_DIR)/lib/libc.a: $(UCLIBC_SRC_DIR)/.config @ echo "Building uclibc..." Modified: buildrom-devel/scripts/Build.settings =================================================================== --- buildrom-devel/scripts/Build.settings 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/scripts/Build.settings 2007-11-21 23:07:15 UTC (rev 58) @@ -26,6 +26,7 @@ CROSS_CFLAGS= CROSS_ASFLAGS= CROSS_LDFLAGS= +UCLIBC_LOADER = /lib/ld-uClibc.so.0 ifeq ($(BUILD_ARCH),x86_64) ifneq ($(BUILD_ARCH), $(TARGET_ARCH)) @@ -34,6 +35,8 @@ CROSS_CFLAGS=-m32 CROSS_LDFLAGS=-melf_i386 +else +UCLIBC_LOADER = /lib/ld64-uClibc.so.0 endif endif @@ -63,7 +66,7 @@ # (without any cross flags) for at least busybox, and probably others too LDFLAGS_orig = -nostdlib -L$(STAGING_DIR)/lib \ --Wl,-rpath-link,$(STAGING_DIR)/lib -Wl,--dynamic-linker,/lib/ld-uClibc.so.0 \ +-Wl,-rpath-link,$(STAGING_DIR)/lib -Wl,--dynamic-linker,$(UCLIBC_LOADER) \ $(LDFLAGS_platform) LDFLAGS=$(CROSS_LDFLAGS) $(LDFLAGS_orig) Modified: buildrom-devel/scripts/Makefile.lab =================================================================== --- buildrom-devel/scripts/Makefile.lab 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/scripts/Makefile.lab 2007-11-21 23:07:15 UTC (rev 58) @@ -1,5 +1,11 @@ # Targets specifically for the LAB payload +ifeq ($(CONFIG_TARGET_64BIT), y) +MKELFIMAGE_KERNEL = bzImage +else +MKELFIMAGE_KERNEL = vmlinux +endif + $(OUTPUT_DIR)/initrd.uncompressed: $(PAYLOAD-y) @ cp -af $(SKELETON_DIR)/* $(INITRD_DIR) @ chmod 0755 $(INITRD_DIR)/linuxrc @@ -30,14 +36,14 @@ @ rm -f $@ @ $(STAGING_DIR)/sbin/mkelfImage --command-line="$(COMMAND_LINE)" \ --ramdisk=$(OUTPUT_DIR)/initrd.uncompressed \ - $(OUTPUT_DIR)/vmlinux $@ + $(OUTPUT_DIR)/$(MKELFIMAGE_KERNEL) $@ @ chmod 0644 $@ $(OUTPUT_DIR)/lab-payload.elf: $(OUTPUT_DIR)/initrd @ echo "Building the ELF payload..." @ rm -f $@ @ $(STAGING_DIR)/sbin/mkelfImage --command-line="$(COMMAND_LINE)" \ - --ramdisk=$(OUTPUT_DIR)/initrd $(OUTPUT_DIR)/bzImage $@ + --ramdisk=$(OUTPUT_DIR)/initrd $(OUTPUT_DIR)/$(MKELFIMAGE_KERNEL) $@ @ chmod 0644 $@ @ $(BIN_DIR)/checkrom.sh $@ Modified: buildrom-devel/skeleton/device.txt =================================================================== --- buildrom-devel/skeleton/device.txt 2007-11-13 22:22:30 UTC (rev 57) +++ buildrom-devel/skeleton/device.txt 2007-11-21 23:07:15 UTC (rev 58) @@ -1,17 +1,25 @@ -null c 640 0 0 1 3 -zero c 640 0 0 1 5 -tty c 640 0 0 5 0 -tty0 c 640 0 0 4 0 -tty1 c 640 0 0 4 1 -console c 640 0 0 5 1 -sda b 660 0 0 8 0 -sda1 b 660 0 0 8 1 -sda2 b 660 0 0 8 2 -sda3 b 660 0 0 8 3 -sda4 b 660 0 0 8 4 -sda5 b 660 0 0 8 5 -sda6 b 660 0 0 8 6 -sda7 b 660 0 0 8 7 -sda8 b 660 0 0 8 8 -mem c 640 0 0 1 1 -fb0 c 640 0 0 29 0 +null c 640 0 0 1 3 +zero c 640 0 0 1 5 +tty c 640 0 0 5 0 +tty0 c 640 0 0 4 0 +tty1 c 660 0 0 4 1 +hda b 660 0 0 3 0 +hda1 b 660 0 0 3 1 +hda2 b 660 0 0 3 2 +hdb b 660 0 0 3 64 +hdb1 b 660 0 0 3 65 +hdb2 b 660 0 0 3 66 +hdc b 660 0 0 22 0 +fd0 b 660 0 0 2 0 +console c 640 0 0 5 1 +sda b 660 0 0 8 0 +sda1 b 660 0 0 8 1 +sda2 b 660 0 0 8 2 +sda3 b 660 0 0 8 3 +sda4 b 660 0 0 8 4 +sda5 b 660 0 0 8 5 +sda6 b 660 0 0 8 6 +sda7 b 660 0 0 8 7 +sda8 b 660 0 0 8 8 +mem c 640 0 0 1 1 +fb0 c 640 0 0 29 0

1 0

[LinuxBIOS] [PATCH] v3: Add missing mkdir's
by Uwe Hermann 21 Nov '07

21 Nov '07

This patch brings us closer to a working v3 build. The remaining thing is the printk/post_code/SHARED issue. Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org

2 2

[LinuxBIOS] r515 - in LinuxBIOSv3/mainboard: adl/msm800sev amd/norwich artecgroup/dbe61
by svn＠openbios.org 21 Nov '07

21 Nov '07

Author: uwe Date: 2007-11-21 21:12:56 +0100 (Wed, 21 Nov 2007) New Revision: 515 Modified: LinuxBIOSv3/mainboard/adl/msm800sev/Makefile LinuxBIOSv3/mainboard/amd/norwich/Makefile LinuxBIOSv3/mainboard/artecgroup/dbe61/Makefile Log: Add mkdir calls to create the necessary directories. This should probably be factored out together with the rest of the lines in mainboard/* later, but for now it'll do. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Ronald G. Minnich <rminnich(a)gmail.com> Modified: LinuxBIOSv3/mainboard/adl/msm800sev/Makefile =================================================================== --- LinuxBIOSv3/mainboard/adl/msm800sev/Makefile 2007-11-21 18:25:20 UTC (rev 514) +++ LinuxBIOSv3/mainboard/adl/msm800sev/Makefile 2007-11-21 20:12:56 UTC (rev 515) @@ -36,10 +36,13 @@ $(obj)/mainboard/$(MAINBOARDDIR)/initram.o: $(src)/mainboard/$(MAINBOARDDIR)/initram.c $(Q)$(CC) $(INITCFLAGS) -D_SHARED -fPIE -c $< -o $@ $(obj)/northbridge/amd/geodelx/raminit.o: $(src)/northbridge/amd/geodelx/raminit.c + $(Q)mkdir -p $(dir $@) $(Q)$(CC) $(INITCFLAGS) -D_SHARED -fPIE -c $< -o $@ $(obj)/southbridge/amd/cs5536/smbus_initram.o: $(src)/southbridge/amd/cs5536/smbus_initram.c + $(Q)mkdir -p $(dir $@) $(Q)$(CC) $(INITCFLAGS) -D_SHARED -fPIE -c $< -o $@ $(obj)/arch/x86/geodelx/geodelx.o: $(src)/arch/x86/geodelx/geodelx.c + $(Q)mkdir -p $(dir $@) $(Q)$(CC) $(INITCFLAGS) -D_SHARED -fPIE -c $< -o $@ $(obj)/linuxbios.initram $(obj)/linuxbios.initram.map: $(obj)/stage0.init $(obj)/stage0-prefixed.o $(INITRAM_OBJ) Modified: LinuxBIOSv3/mainboard/amd/norwich/Makefile =================================================================== --- LinuxBIOSv3/mainboard/amd/norwich/Makefile 2007-11-21 18:25:20 UTC (rev 514) +++ LinuxBIOSv3/mainboard/amd/norwich/Makefile 2007-11-21 20:12:56 UTC (rev 515) @@ -30,10 +30,13 @@ $(obj)/mainboard/$(MAINBOARDDIR)/initram.o: $(src)/mainboard/$(MAINBOARDDIR)/initram.c $(Q)$(CC) $(INITCFLAGS) -D_SHARED -fPIE -c $< -o $@ $(obj)/northbridge/amd/geodelx/raminit.o: $(src)/northbridge/amd/geodelx/raminit.c + $(Q)mkdir -p $(dir $@) $(Q)$(CC) $(INITCFLAGS) -D_SHARED -fPIE -c $< -o $@ $(obj)/southbridge/amd/cs5536/smbus_initram.o: $(src)/southbridge/amd/cs5536/smbus_initram.c + $(Q)mkdir -p $(dir $@) $(Q)$(CC) $(INITCFLAGS) -D_SHARED -fPIE -c $< -o $@ $(obj)/arch/x86/geodelx/geodelx.o: $(src)/arch/x86/geodelx/geodelx.c + $(Q)mkdir -p $(dir $@) $(Q)$(CC) $(INITCFLAGS) -D_SHARED -fPIE -c $< -o $@ STAGE2_MAINBOARD_OBJ = Modified: LinuxBIOSv3/mainboard/artecgroup/dbe61/Makefile =================================================================== --- LinuxBIOSv3/mainboard/artecgroup/dbe61/Makefile 2007-11-21 18:25:20 UTC (rev 514) +++ LinuxBIOSv3/mainboard/artecgroup/dbe61/Makefile 2007-11-21 20:12:56 UTC (rev 515) @@ -34,10 +34,13 @@ $(obj)/mainboard/$(MAINBOARDDIR)/initram.o: $(src)/mainboard/$(MAINBOARDDIR)/initram.c $(Q)$(CC) $(INITCFLAGS) -D_SHARED -fPIE -c $< -o $@ $(obj)/northbridge/amd/geodelx/raminit.o: $(src)/northbridge/amd/geodelx/raminit.c + $(Q)mkdir -p $(dir $@) $(Q)$(CC) $(INITCFLAGS) -D_SHARED -fPIE -c $< -o $@ $(obj)/southbridge/amd/cs5536/smbus_initram.o: $(src)/southbridge/amd/cs5536/smbus_initram.c + $(Q)mkdir -p $(dir $@) $(Q)$(CC) $(INITCFLAGS) -D_SHARED -fPIE -c $< -o $@ $(obj)/arch/x86/geodelx/geodelx.o: $(src)/arch/x86/geodelx/geodelx.c + $(Q)mkdir -p $(dir $@) $(Q)$(CC) $(INITCFLAGS) -D_SHARED -fPIE -c $< -o $@ $(obj)/linuxbios.initram $(obj)/linuxbios.initram.map: $(obj)/stage0.init $(obj)/stage0-prefixed.o $(INITRAM_OBJ)

1 0

[LinuxBIOS] From slashdot - a company possibly using linuxbios.
by Janek Kozicki 21 Nov '07

21 Nov '07

Hi, I just wanted to let you know about Phoenix company (news from slashdot). My point is - we could check if they use LinuxBIOS and if so - do they respect the license? "Phoenix Technologies, a developer of BIOS software, is working on a new technology called Hyperspace that will allow you to instantly load certain applications like email, web browser and media player, without loading windows. It could even lead to tailoring of computers to even more specific demographics, like a student laptop preloaded with word processor, email and an IM all available at the press of a button." URL: http://www.phoenix.com/en/Home/default.htm best regards -- Janek Kozicki

8 11

[LinuxBIOS] r514 - in LinuxBIOSv3: arch/x86 include/arch/x86
by svn＠openbios.org 21 Nov '07

21 Nov '07

Author: uwe Date: 2007-11-21 19:25:20 +0100 (Wed, 21 Nov 2007) New Revision: 514 Modified: LinuxBIOSv3/arch/x86/post_code.c LinuxBIOSv3/arch/x86/speaker.c LinuxBIOSv3/include/arch/x86/legacy.h Log: Add comment, small style fixes (trivial). Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: LinuxBIOSv3/arch/x86/post_code.c =================================================================== --- LinuxBIOSv3/arch/x86/post_code.c 2007-11-20 19:06:03 UTC (rev 513) +++ LinuxBIOSv3/arch/x86/post_code.c 2007-11-21 18:25:20 UTC (rev 514) @@ -20,9 +20,16 @@ #include <types.h> #include <io.h> +/** + * Output a POST code (Power-on-self-test code) on port 0x80. + * + * We're hardcoding 0x80 as port where we output the POST code, as pretty + * much all of today's computers use that one. However, in the past (pre-486 + * era or so) other ports were sometimes used, too. + * + * @param value The 8 bit value to output as POST code. + */ void post_code(u8 value) { outb(value, 0x80); } - - Modified: LinuxBIOSv3/arch/x86/speaker.c =================================================================== --- LinuxBIOSv3/arch/x86/speaker.c 2007-11-20 19:06:03 UTC (rev 513) +++ LinuxBIOSv3/arch/x86/speaker.c 2007-11-21 18:25:20 UTC (rev 514) @@ -47,13 +47,15 @@ */ void speaker_enable(u16 freq) { - /* Select counter 2. Read/write LSB first, then MSB. Use mode 3 - (square wave generator). Use a 16bit binary counter. */ + /* + * Select counter 2. Read/write LSB first, then MSB. Use mode 3 + * (square wave generator). Use a 16bit binary counter. + */ outb(0xb6, I82C54_CONTROL_WORD_REGISTER); /* Set the desired tone frequency. */ - outb((u8)(freq & 0x00ff), I82C54_COUNTER2); /* LSB. */ - outb((u8)(freq >> 8), I82C54_COUNTER2); /* MSB. */ + outb((u8)(freq & 0x00ff), I82C54_COUNTER2); /* LSB */ + outb((u8)(freq >> 8), I82C54_COUNTER2); /* MSB */ /* Enable the PC speaker (set bits 0 and 1). */ outb(inb(PC_SPEAKER_PORT) | 0x03, PC_SPEAKER_PORT); @@ -105,4 +107,3 @@ speaker_tone(1760, 2000); /* 1760 == note A6. */ #endif } - Modified: LinuxBIOSv3/include/arch/x86/legacy.h =================================================================== --- LinuxBIOSv3/include/arch/x86/legacy.h 2007-11-20 19:06:03 UTC (rev 513) +++ LinuxBIOSv3/include/arch/x86/legacy.h 2007-11-21 18:25:20 UTC (rev 514) @@ -28,7 +28,7 @@ * - http://en.wikipedia.org/wiki/Intel_8253 */ -#define I82C54_CONTROL_WORD_REGISTER 0x43 /* Write-only. */ +#define I82C54_CONTROL_WORD_REGISTER 0x43 /* Write-only! */ #define I82C54_COUNTER0 0x40 #define I82C54_COUNTER1 0x41 #define I82C54_COUNTER2 0x42

1 0

[LinuxBIOS] Problems with elfboot
by Hanoi Santos Hung 21 Nov '07

21 Nov '07

Thanks, Peter I send you the full serial output . As you can see in rom_stream: 0xfffe0000 - 0xfffeffff there is only 0xFF ?? Best Regards Ing. Hanoi Santos Hung Instituto Central de Investigación Digital >On Mon, Nov 05, 2007 at 03:45:55PM -0500, Hanoi Santos Hung wrote: >> Hi : >> I'm working with this hardware configuration : >> North : vt8605 >> South : vt82C686B >> RAM : 128 MB SODIMM >> >> I begin modifying the code from vt8601 and LinuxBIOS V1.0 version >> of vt82c686 >Wow, 1.0 is really old. Was there no board in 2.0 that was similar to >your board? Perhaps one of the EPIA boards? >> and I have my system working until it tries to load the payload >> (filo). I think the problem was the memory, but >> ram_check(0x00000000, 0xA0000); >> ram_check(0x00100000, 0x8000000); >> >> works perfectly, >ram_check() is a _VERY_ simplistic memory test, RAM is not >neccessarily working properly just because it does not fail. >Please try to use memtest86 as payload before FILO or anything else. >> another symptom : when the board make a cold start it > >freeze at "Jumping to LinuxBIOS". > > >> I'll apreciate any help >Please send the full serial output you get from the board. //Peter

1 0

[LinuxBIOS] printk()/post_code(): Compile failure for all hardware targets in v3
by Carl-Daniel Hailfinger 21 Nov '07

21 Nov '07

Hi, I can't compile any of the hardware targets in v3. The qemu target builds just fine. Error for the AMD Norwich target: In file included from LinuxBIOSv3/mainboard/amd/norwich/initram.c:24: include/post_code.h:23: error: ‘post_code’ redeclared as different kind of symbol include/console.h:38: error: previous declaration of ‘post_code’ was here Error for the Advanced Digital Logic MSM800SEV: In file included from LinuxBIOSv3/mainboard/adl/msm800sev/initram.c:24: include/post_code.h:23: error: ‘post_code’ redeclared as different kind of symbol include/console.h:38: error: previous declaration of ‘post_code’ was here Error for the Artec Group DBE61: In file included from LinuxBIOSv3/mainboard/artecgroup/dbe61/initram.c:24: include/post_code.h:23: error: ‘post_code’ redeclared as different kind of symbol include/console.h:38: error: previous declaration of ‘post_code’ was here The reason is similar for all of them: include/console.h specifies > void post_code(u8 value); include/post_code.h specifies (because _SHARED is defined) > void stage0_post_code(u8 value) ; > void (*post_code)(u8 value) = stage0_post_code; Of course these definitions do conflict. While I appreciate the idea to use one printk()/post_code() implementation for all stages, it seems the current realization has a few aspects which give us various interesting problems to solve: * The conflicting post_code() definitions above are not alone, the same happens for printk. * If you remove post_code() from include/console.h everywhere post_code() is shared, you encounter the next problem: If two files with _SHARED are linked together, each of them will contain the assignment (*post_code)=stage0_post_code, resulting in linker errors because a symbol appears twice. * Even if you manage to avoid all the problems above, a new problem arises: We have to build a LAR archive in one continuous flow because we can't extract the location of the stage0 symbols from an existing bootblock in a LAR archive and thus can't link initram and stage2 against an existing bootblock. Because of that, we never can do partial BIOS updates, which defeats the whole purpose of LAR. Suggestions for solving the problems mentioned above: * Always wrap shared function definitions in SHARED macros. * Make sure the assignment "ret (*func)(args) attr= stage0_##func" happens only once per final linked object. * Include a .map file of shared stage0 functions in the LAR. Regards, Carl-Daniel

2 4

← Newer
1
...
16
17
18
19
20
21
22
...
40
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot November 2007