coreboot September 2004

coreboot@coreboot.org

41 participants
123 discussions

RE: tyan-s2850
by YhLu 08 Sep '04

08 Sep '04

You need to include northbridge/amd/amdk8/resourcemap.c in the auto.c Someone split the function from raminit.c Regards Yinghai Lu _____ From: Sagiv Yefet [mailto:sagivy@3vium.com] Sent: Wednesday, September 08, 2004 2:35 AM To: linuxbios(a)clustermatic.org Subject: tyan-s2850 I am trying to build target to tyan-s2850 and there is a compilation error: setup_default_resource_map undeclared The problem is that there is no src/mainboard/tyan/s2850/resourcemap.c What should I do ? thanks

1 0

winbond 83782D
by Sagiv Yefet 08 Sep '04

08 Sep '04

I need to build rom for tyan2850 with superio - winbond 83782D. Where can I get sources ?

2 1

Windows over LinuxBIOS
by Dave Belt 08 Sep '04

08 Sep '04

I have a customer building a custom PC based board. I have been presenting LinuxBIOS as a viable BIOS option; however, they have a serious interest in running Windows, likely 2K & XP, on this board. Does anybody have experience in this area to share? I'm currently trying to get a grasp of the effort required beyond the LinuxBIOS port itself. Also, what kind of reliability are you getting with your implementation? Any info you could provide would be much appreciated. Thanks

1 0

elf for tyan s2850
by Sagiv Yefet 07 Sep '04

07 Sep '04

What elf file should I use for tyan s2850 ? thanks

1 0

tyan-s2850
by Sagiv Yefet 07 Sep '04

07 Sep '04

I am trying to build target to tyan-s2850 and there is a compilation error: setup_default_resource_map undeclared The problem is that there is no src/mainboard/tyan/s2850/resourcemap.c What should I do ? thanks

1 0

epia m vga + memcpy failed
by Trellix78＠aol.com 07 Sep '04

07 Sep '04

That message is from the original freebios. I was thinking that shadowing is not corretly set up and that maybe the segment is write-protected. After setting up shadowing, the chipset my turn on write protection by default, anyway. I don't know how to turn write protection off specifically for the C00000 segment. So far, the only reference that I can find about write protection is in the Pentium developer's manual. It says to have bit 16 of CR0 be zero to turn off write protection.

4 3

EPIA-M build problem for freebios2
by Dan Sully 07 Sep '04

07 Sep '04

So first of all, it's not clear from any of the outdated documentation whether one should be using freebios or freebios2. So, I'm jumping in and trying to use 2 - but getting this error: ar cr linuxbios.a malloc.o apic_timer.o pci_ops.o vt8235.o chip.o memset.o fallback_boot.o keyboard.o cpuid.o pnp_device.o printk.o irq_tables.o pgtbl.o tables.o pci_device.o console.o cpufixup.o elfboot.o hardwaremain.o boot.o linuxbios_table.o delay.o version.o memcmp.o isa-dma.o hypertransport.o vtxprintf.o root_device.o mtrr.o uart8250.o device_util.o ./option_table.o compute_ip_checksum.o device.o memcpy.o northbridge.o clog2.o pirq_routing.o memmove.o mc146818rtc.o rom_stream.o c_start.o vsprintf.o cpu.o static.o gcc -nostdlib -r -o linuxbios_c.o c_start.o mainboard.o uart8250_console.o linuxbios.a /usr/lib/gcc-lib/i486-linux/3.3.4/libgcc.a gcc -nostdlib -nostartfiles -static -o linuxbios_c -T /home/dsully/src/freebios2/src/config/linuxbios_c.ld linuxbios_c.o linuxbios_c.o(.data+0x1e4): undefined reference to `mainboard_via_epia_m_control' collect2: ld returned 1 exit status make: *** [linuxbios_c] Error 1 targets/via/epia-m/epia-m/normal/static.c which includes: src/mainboard/via/epia-m/chip.h where mainboard_via_epia_m_control is set as extern. Any thoughts? Thanks. -D -- <weezyl> Oh, I cook bacon naked all the time. You just have to keep the heat on med-low.

6 11

RE: [Etherboot-developers] lb+eb+filo in epia-5000
by elife elife 07 Sep '04

07 Sep '04

Hi Yinghai Lu, I don't know whether I am using the last patch. Where can I find the last patch? I browse the eb's cvs tree but seems filo not merge yet. My hardware is VIA EPIA-5000 board. The output of lspci just said 00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] 00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10) 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 1e) 00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 1e) 00:11.4 Non-VGA unclassified device: VIA Technologies, Inc. VT8235 ACPI (rev 10)00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40) 00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 20) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51) 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) And when I boot from lb, related boot info: usb.c: registered new driver usbdevfs usb.c: registered new driver hub host/usb-uhci.c: $Revision: 1.275 $ time 11:08:56 Sep 6 2004 host/usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:11.2 IRQ routing conflict for 00:11.2, have irq 12, want irq 11 IRQ routing conflict for 00:11.3, have irq 12, want irq 11 PCI: Sharing IRQ 11 with 00:12.0 host/usb-uhci.c: USB UHCI at I/O 0x1c00, IRQ 12 host/usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:11.3 IRQ routing conflict for 00:11.2, have irq 12, want irq 11 IRQ routing conflict for 00:11.3, have irq 12, want irq 11 PCI: Sharing IRQ 11 with 00:12.0 host/usb-uhci.c: USB UHCI at I/O 0x1c20, IRQ 12 host/usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Thanks a lot! >From: "Yinghai Lu" <yhlu(a)tyan.com> >To: "'elife elife'" <rimy2000(a)hotmail.com>, <etherboot-developers(a)lists.sourceforge.net> >CC: <linuxbios(a)clustermatic.org> >Subject: RE: [Etherboot-developers] lb+eb+filo in epia-5000 >Date: Tue, 7 Sep 2004 09:19:57 -0700 > >Are you using the last patch? > >What's your USB controller model and etc? > >Regards > >YH > _________________________________________________________________ 免费下载 MSN Explorer: http://explorer.msn.com/lccn/

1 0

lb+eb+filo in epia-5000
by elife elife 07 Sep '04

07 Sep '04

Hi, I am trying to use linuxbios+etherboot+filo to boot from usb stick. I use etherboot-5.2.4_btext_filo_usb.diff.bz2(Thanks, sjames). But the filo can't boot my kernel, below is th output: boot: uda1:/bzImage LinuxLabs USB bootloader New USB device, setting address 2 00000008:00000005:00000050 Manufacturor: USB Product: B�� Serial: ��~? boot: uda1:/bzImage Then I enable the debug info: [FILO]boot eax = 0xfbffffff boot ebx = 0xffffffff boot arg = 0xffffffff FILO version 0.4.1 (beatms@beatms) 2004Ä�� 09ÔÂ07ÈÕÐÇÆÚ¶þ Press <Enter> for default boot, or <Esc> for boot prompt... 2 1 timed out boot: uda1:/bzImage dev=uda1, path=/bzImage LinuxLabs USB bootloader Found UHCI at 00001c00 Resetting UHCI uhc_init setting framelist to: 036a5d10 Starting UHCI HCI at 00001c00 Found UHCI at 00001c20 Resetting UHCI uhc_init setting framelist to: 036a5d10 Starting UHCI HCI at 00001c20 frame_list is at ffffe2f0 frame_list_link: addr: 00058270 frame_list_link: raw addr: 036fdf80 frame_list_link: terminate: 00000000 frame_list_link: queue: 00000001 frame_list_link: depth: 00000000 frame_list is at ffffc2f0 frame_list_link: addr: 00058290 frame_list_link: raw addr: 036fdfa0 frame_list_link: terminate: 00000000 frame_list_link: queue: 00000001 frame_list_link: depth: 00000000 poll_usb1 i=0 poll_u_root_hub1 v=00000580 poll_u_root_hub1 v=00001493 poll_u_root_hub2 v=00001493 poll_u_root_hub21 v=00001493 Connection on port 00001c12 New USB device, setting address 2 uhci_control_msg: request_type = 00000000 request = 00000005 wLength=0 HCI at 00001c00 failed_transaction: TD(00050280): failed_transaction: type: SETUP failed_transaction: retries: 00000003 failed_transaction: IOC failed_transaction: active: 00000001 failed_transaction: device_addr: 00000000 failed_transaction: endpoint: 00000000 failed_transaction: data_toggle: 00000000 failed_transaction: max_transfer: 00000007 failed_transaction: actual: 00000000 failed_transaction: link: failed_transaction: ²ÿÿaddr: 000502a0 failed_transaction: ²ÿÿ raw addr: 036f5fb0 failed_transaction: ²ÿÿterminate: 00000000 failed_transaction: ²ÿÿqueue: 00000000 failed_transaction: ²ÿÿdepth: 00000000 failed_transaction: TD(000502a0): failed_transaction: type: IN failed_transaction: retries: 00000000 failed_transaction: active: 00000001 failed_transaction: device_addr: 00000000 failed_transaction: endpoint: 00000000 failed_transaction: data_toggle: 00000001 failed_transaction: max_transfer: 000007ff failed_transaction: actual: 00000000 failed_transaction: link: failed_transaction: addr: fc95a2f0 failed_transaction: raw addr: 00000000 failed_transaction: terminate: 00000001 failed_transaction: queue: 00000000 failed_transaction: depth: 00000000 configure_device: set_address failed! poll_usb1 i=1 poll_u_root_hub1 v=00000180 poll_u_root_hub1 v=00000080 poll_usb1 i=0 poll_u_root_hub1 v=00000580 poll_u_root_hub1 v=00000493 poll_u_root_hub2 v=00000493 poll_u_root_hub21 v=00000493 Connection on port 00001c12 The usb stick works properly in lb+eb. What do above info mean and what should I do? Thanks a lot! _________________________________________________________________ ��ѽ��н��ʹ�� MSN Messenger: http://messenger.msn.com/cn

2 1

epia m vga + memcpy failed
by Trellix78＠aol.com 07 Sep '04

07 Sep '04

I was trying to figure why VGA wasn't being properly set on my epia m when I found that the code in mainboard.c was looking for device id 0x3123 while my epia m has device id 0x3122 for the CLE266. After changing the id, memcpy is failing to copy the bios code. Anyone know why that could be? Here's a piece of the log: . . . setting ethernet Assigning IRQ 11 to 0:12.0 Readback = 11 setting vga Assigning IRQ 11 to 1:0.0 Readback = 11 setting pci slot setting vt8235 slot Assigning IRQ 5 to 0:11.1 Readback = 5 Assigning IRQ 12 to 0:11.5 Readback = 12 INSTALL REAL-MODE IDT DO THE VGA BIOS found VGA: vid=1106, did=3122 Setting up VGA, VGABIOS_START: 0xfffe0000 First 16 bytes of VGA_ROM: 0x55 0xaa 0x7d 0xe9 0x26 0x7f 0x5e 0x1b 0xfa 0xf9 0xf4 0x82 0x0 0x0 0x0 0x0 Failed to copy VGA BIOS to 0xc0000 First 16 bytes of 0xc0000: 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff setting VGA up anyway bus/devfn = 0x100 biosint: # 0x6, eax 0x100 ebx 0x100 ecx 0x100 edx 0x12 biosint: ebp 0x11a2c esp 0xff6 edi 0xda8c esi 0x12350 biosint: ip 0x3 cs 0xc000 flags 0x46 biosint: Oops, exception 6 Stack contents: 0x0003 0xc000 0x0046 0x4d75 0x0000 biosint: Bailing out Checking IRQ routing tables... . . .

2 1

← Newer
1
...
6
7
8
9
10
11
12
13
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot September 2004