My MB is A6T based on vt8601 and vt82c686. When call
vgabios(at 0xc000:0003), it halted.
...
INSTALL REAL-MODE IDT
DO THE VGA BIOS
found VGA: vid=1023, did=8500
0x55 0xAA ...(16 bytes)
bus/devfn = 0x100
biosint: # 0x1a, eax 0xb109 ebx 0x100 ecx 0x100 edx
0xb29f
biosint: ebp 0x10fd8 esp 0xfc9 edi 0x2 esi 0x14040
biosint: ip 0x56e8 cs 0xc000 flags 0x16
0xb109: bus 1 devfn 0x0 reg 0x2 val 0x8500
biosint: # 0x58, eax 0xc000 ebx 0x100 ecx 0x8500 edx
0x3c2
biosint: ebp 0x10fd8 esp 0xfc7 edi 0x2 esi 0x14040
biosint: ip 0x2329 cs 0xc000 flags 0x246
biosint: Unsupport int #0x58
biosint: # 0xcd, eax 0xc000 ebx 0x100 ecx 0x8500 edx
0x3c2
biosint: ebp 0x10fd8 esp 0xfc7 edi 0x2 esi 0x14040
biosint: ip 0x2329 cs 0xc000 flags 0x246
biosint: Unsupport int #0xcd
(halted)
__________________________________
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
http://mobile.yahoo.com/maildemo
This question was there before on this list. Does anyone have a pointer
or some details?
* Sagiv Yefet <sagivy(a)3vium.com> [040901 11:23]:
> In the north bridge section of amd/serenade there are the following
> entries:
> northbridge amd/amdk8 "mc0"
> #pci 0:18.0
> #pci 0:18.0
> #pci 0:18.0
> #pci 0:18.1
> #pci 0:18.2
> #pci 0:18.3
> why is 0:18.0 repeated three times ?
>
> -----Original Message-----
> From: Stefan Reinauer [mailto:stepan@openbios.org]
> Sent: Monday, August 30, 2004 11:44 AM
> To: Sagiv Yefet
> Cc: linuxbios(a)clustermatic.org
> Subject: Re: Etherboot for AMD64
>
> * Sagiv Yefet <sagivy(a)3vium.com> [040830 11:59]:
> > What image suit AMD64 in the etherboot project ?
> > Thanks.
>
> You should try tg3--ide_disk.zelf. Or better use YhLu's patches to add
> filo and sata
>
> Stefan
>
>
>
>
