Eric,
Several Macro in console/console.h should be changed.
For example:
#define print_debug_hex8(HEX) printk_debug("0x08x", ((HEX))
#define print_debug_hex16(HEX) printk_debug("0x016x", ((HEX))
#define print_debug_hex32(HEX) printk_debug("0x032x", ((HEX))
to:
#define print_debug_hex8(HEX) printk_debug("0x02x", ((HEX))
#define print_debug_hex16(HEX) printk_debug("0x04x", ((HEX))
#define print_debug_hex32(HEX) printk_debug("0x08x", ((HEX))
regards
Yinghai Lu
-----邮件原件-----
发件人: YhLu
发送时间: 2003年7月31日 20:44
收件人: ebiederman(a)lnxi.com
抄送: ron minnich; Stefan Reinauer; linuxbios(a)clustermatic.org
主题: 答复: Fixes for Tyan s2880
Eric,
I see.
I move some code from raminit.c setup_top_ram to it and have a try.
Regards
Yinghai Lu
-----邮件原件-----
发件人: ebiederman(a)lnxi.com [mailto:ebiederman@lnxi.com]
发送时间: 2003年7月31日 20:40
收件人: YhLu
抄送: ron minnich; Stefan Reinauer; linuxbios(a)clustermatic.org
主题: Re: Fixes for Tyan s2880
YhLu <YhLu(a)tyan.com> writes:
> Eric,
>
> I have checked your old k8/cpufixup.c, and it already has TOM2 etc setup.
> and SYSCFG_TOM2_EN...etc...
I shift by 12 instead of 10 for the low half of TOP_MEM2...
Which tends to leave TOP_MEM2 at 4GB...
Eric
_______________________________________________
Linuxbios mailing list
Linuxbios(a)clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios
