coreboot August 2003

coreboot@coreboot.org

53 participants
141 discussions

04 Aug '03

Eric, Thanks, it works. Regards Yinghai Lu ASSIGN RESOURCES, bus 0 PCI: 00:01.0 1c <- [0x00001000 - 0x00003fff] bus 1 io PCI: 00:01.0 24 <- [0xfe300000 - 0xfe2fffff] bus 1 prefmem PCI: 00:01.0 20 <- [0xfe100000 - 0xfe1fffff] bus 1 mem ASSIGN RESOURCES, bus 1 PCI: 01:07.0 10 <- [0x00001000 - 0x000010ff] io PCI: 01:07.0 14 <- [0xfe180000 - 0xfe181fff] mem PCI: 01:07.0 1c <- [0x00001400 - 0x000014ff] io PCI: 01:07.1 10 <- [0x00001800 - 0x000018ff] io PCI: 01:07.1 14 <- [0xfe182000 - 0xfe183fff] mem PCI: 01:07.1 1c <- [0x00001c00 - 0x00001cff] io PCI: 01:08.0 10 <- [0x00002000 - 0x000020ff] io PCI: 01:08.0 14 <- [0xfe184000 - 0xfe185fff] mem PCI: 01:08.0 1c <- [0x00002400 - 0x000024ff] io PCI: 01:08.1 10 <- [0x00002800 - 0x000028ff] io PCI: 01:08.1 14 <- [0xfe186000 - 0xfe187fff] mem PCI: 01:08.1 1c <- [0x00002c00 - 0x00002cff] io PCI: 01:09.0 10 <- [0xfe100000 - 0xfe10ffff] mem PCI: 01:09.0 18 <- [0xfe110000 - 0xfe11ffff] mem PCI: 01:09.1 10 <- [0xfe120000 - 0xfe12ffff] mem PCI: 01:09.1 18 <- [0xfe130000 - 0xfe13ffff] mem PCI: 01:0a.0 10 <- [0x00003000 - 0x000030ff] io PCI: 01:0a.0 14 <- [0xfe140000 - 0xfe14ffff] mem PCI: 01:0a.0 1c <- [0xfe150000 - 0xfe15ffff] mem PCI: 01:0a.1 10 <- [0x00003400 - 0x000034ff] io PCI: 01:0a.1 14 <- [0xfe160000 - 0xfe16ffff] mem PCI: 01:0a.1 1c <- [0xfe170000 - 0xfe17ffff] mem ASSIGNED RESOURCES, bus 1

1 0

IO ports assign
by YhLu 04 Aug '03

04 Aug '03

Eric, I have tested s2880 with all addon cards, and found interesting problem. When I plug Adaptec 29320 PCI X scsi card into slot 3 and 4. That share BUS_A of 8131 with LSI SCSI. Linux bios got IO port allocation problem on bus 1. BUS 1: 1000-2fff LSI will use 3000 later... Regards Yinghai Lu Allocating resources... ASSIGN RESOURCES, bus 0 PCI: 00:01.0 1c <- [0x00001000 - 0x00002fff] bus 1 io PCI: 00:01.0 24 <- [0xfe300000 - 0xfe2fffff] bus 1 prefmem PCI: 00:01.0 20 <- [0xfe100000 - 0xfe1fffff] bus 1 mem ASSIGN RESOURCES, bus 1 PCI: 01:07.0 10 <- [0x00001000 - 0x000010ff] io PCI: 01:07.0 14 <- [0xfe180000 - 0xfe181fff] mem PCI: 01:07.0 1c <- [0x00001400 - 0x000014ff] io PCI: 01:07.1 10 <- [0x00001800 - 0x000018ff] io PCI: 01:07.1 14 <- [0xfe182000 - 0xfe183fff] mem PCI: 01:07.1 1c <- [0x00001c00 - 0x00001cff] io PCI: 01:08.0 10 <- [0x00002000 - 0x000020ff] io PCI: 01:08.0 14 <- [0xfe184000 - 0xfe185fff] mem PCI: 01:08.0 1c <- [0x00002400 - 0x000024ff] io PCI: 01:08.1 10 <- [0x00002800 - 0x000028ff] io PCI: 01:08.1 14 <- [0xfe186000 - 0xfe187fff] mem PCI: 01:08.1 1c <- [0x00002c00 - 0x00002cff] io PCI: 01:09.0 10 <- [0xfe100000 - 0xfe10ffff] mem PCI: 01:09.0 18 <- [0xfe110000 - 0xfe11ffff] mem PCI: 01:09.1 10 <- [0xfe120000 - 0xfe12ffff] mem PCI: 01:09.1 18 <- [0xfe130000 - 0xfe13ffff] mem PCI: 01:0a.0 10 <- [0x00003000 - 0x000030ff] io PCI: 01:0a.0 14 <- [0xfe140000 - 0xfe14ffff] mem PCI: 01:0a.0 1c <- [0xfe150000 - 0xfe15ffff] mem PCI: 01:0a.1 10 <- [0x00003400 - 0x000034ff] io PCI: 01:0a.1 14 <- [0xfe160000 - 0xfe16ffff] mem PCI: 01:0a.1 1c <- [0xfe170000 - 0xfe17ffff] mem ASSIGNED RESOURCES, bus 1

2 1

Re: Weird behaviour with new config method
by ebiederman＠lnxi.com 04 Aug '03

04 Aug '03

Greg Watson <g.watson(a)computer.org> writes: > You need to provide a 'format' string for the option. This bit Ron too. I think > it needs to be made mandatory. If I was not using the stock hdama configuration I would not have a problem with that. It looks like Ron did not check in the fix or whatever. I don't know yet which option it is having a problem with. Eric

2 1

How can I transfer file to LinuxBIOS machine
by gimyung han 04 Aug '03

04 Aug '03

I'm trying to enable vgabios on my LinuxBIOS machine. Currently, my EPIA computer is not supporting vga bios and I didn't backup my original BIOS. Fortunately, I have another machine(EPIA-M), so I extract vgabios from BIOS on EPIA-M. I transfered vga bios to my host computer hooked up with EPIA machine. According to the HOWTO, EPIA machine is given a static IP address from host computer. (by its MAC address). so, I tried to connect to host computer via telnet, but I failed. I think network card on EPIA board is not detected. (I compiled kernel image on other computer) is there any way to connect to EPIA computer and transfer vga bios to it. Thanks for any help. >From poor beginner _________________________________________________________________ MSN Messenger를 통해 온라인상에 있는 친구와 대화를 나누세요. http://messenger.msn.co.kr

2 1

Open Firware for Laptop Keyboard Scan/Super I/O's
by Bari Ari 02 Aug '03

02 Aug '03

One of the final hurdles in open firmware for laptops is having support for the "super I/O keyboard scan controllers". Closed source offerings include: http://www.insydesw.com/solutions/pc/keyboard.htm http://www.phoenix.com/en/products/phoenix+cme+firstbios/system+firmware/te… Has anyone come across any open source projects that have started work on this? Bari

1 0

LinuxBIOS for SIS661FX Based Laptop
by Bari Ari 02 Aug '03

02 Aug '03

SiS just publicly announced a new chipset for laptops that supports 800 MHz FSB, DDR400, Ultra-AGPII and HyperStreaming. http://www.sis.com/news/press/661mfx.htm http://www.theregister.co.uk/content/3/32095.html http://www.theregister.co.uk/content/3/31504.html Any idea of the support from SiS (Ollie) on the docs and especially the graphic engine/VideoBIOS support we can expect for LinuxBIOS? -Bari

1 0

address
by John Praveen 01 Aug '03

01 Aug '03

Hello, At what address should the linuxbios.rom and the kernel image file should be kept in Flash memory? My linuxbios.rom is 256KB and kernel image is 1.1MB. --------------------------------- Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software

2 1

Question before buying hardware
by James Weir 01 Aug '03

01 Aug '03

Hi, I am hoping not to sound too stupid by asking these questions but before I spend money on hardware I wanted to ask a few questions... 1. Can linux bios be configured to boot from a local disk as well as using etherboot? 2. Is the EPIA M10000 supported by linux bios? Thanks, James.

2 1

Intel E7000 / 82801CA and SPD
by David Hendricks 01 Aug '03

01 Aug '03

I'm having problems detecting memory on a SuperMicro P4DP6 mainboard using the scanspd utility. Using the spd_82801.c file in the util/scanspd directory, it returns "smbus_devfn not found!" After a few small modifications ( http://www.flagen.com/~sc/linux/lb/p4dp6/spd_82801ca.c ), it finds the SMBus but still can't seem to find any of the memory modules. Any ideas?

1 0

Re: Fixes for Tyan s2880
by YhLu 01 Aug '03

01 Aug '03

Eric, Great. Then there should be no big issue on opteron any more. Can you send to the new raminit.c to me now? Regards Yinghai Lu

3 3

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot August 2003