coreboot July 2003

coreboot@coreboot.org

67 participants
150 discussions

document
by Xavier Pegenaute 16 Jul '03

16 Jul '03

Hi, i almost finnished the documentation that i collected about LinuxBios, you can see this in http://www-est-fib.upc.es/~e6058836/projecte.pdf, i'm open to critics, suggestions, etc ..., in this document only i put the information that for me was useful to understand LinuxBios. I think that it can be better if i put some information about PCI (i have no time for this at the moment), for the rest, i think it's enough. Thanks a lot. Xavi.

1 0

AMD64 & LinuxBIOS
by mmmooretx＠earthlink.net 15 Jul '03

15 Jul '03

I am interested in assembling a CAD/CAM & Gaming machine for my home LAN. The chip is due out mid Sept. I have no details on the motherboard yet. I run SuSE 8.2 Pro at home now. Any inputs would be appreciated, rumors too... If there was an Opteron motherboard with an AGP slot I'd go down that path...

2 1

Geode GX1 processor?
by Ferenc Engard 15 Jul '03

15 Jul '03

Hi all, A bit offtopic: I am looking for a forum/mailing list/people who are work with this processor, especially with its 2d video accel on linux. I have problems, NSC didn't respond, and I stucked... :-( Thanks: Circum

4 6

building HDAMA the old way and the new way:
by ron minnich 15 Jul '03

15 Jul '03

The jmp for fallback is wrong from what I can see. At 0xffff0 I have this: 0: e9 11 00 00 00 jmp 0x16 in other words, the segment is 0000, not f000. The 32-bit is ok: 0: e9 5b 00 ff ff jmp 0xffff0060 This is happening with both old and new config tools. the _start symbol is a T symbol at 0xffff0004 in linuxbios.map. The correct ldscript.ld files are being loaded. Any suggestions? thanks ron

1 0

VGA
by Xavier Pegenaute 15 Jul '03

15 Jul '03

Hi, i have some questions about VGA in LinuxBios. If we don't use ADLO, there is'nt VGA Bios, then the unique possibility to see something in in Linux with the VGA is that we have implemented a FrameBuffer driver for the specific VGA board, and ofcourse that this driver has to talk directly with the hardware. And what about the Xserver ? the X software talk directly with the hardware ? For example if i want to mount a little computer in my home to see DVDs and Divx, is it possible with LinuxBios? Thanks. Xavi.

4 8

LinuxBios-help!
by Devi Priya 15 Jul '03

15 Jul '03

Hi, I am unable to understand many things here. I am using sc1200. External devices include 32 MB SDRAM, 4 MB Flash ROM, Ethernet, PCI audio/video decoder, FI1216-Tuner, LM4550-Audio codec, hard disk. I probably want to load linux from hard disk. If i want to use linuxbios for my project what are the things should be done? I dont use Disk on chip. Plz I have very limited knowledge reg this linuxbios. Help me to understand. _________________________________________________________________ Astrology can be fun. Find out for yourself. http://www.msn.co.in/Astrology/Astromagic/ With just a click!

2 1

DDR problem
by Andrew Ip 15 Jul '03

15 Jul '03

Hi, I'm testing 2 DDR from Samsung on EPIA-M, M368L1713DTL-CB0 and M368L1624DTL-CB0. Both of them are DDR266 128MB. The main different is M368L1713DTL-CB0 has 8x16MB IC's and M368L1624DTL-CB0 has 4x32MB IC's. So far, LinuxBIOS can boot flawlessly with M368L1713DTL-CB0. However, it fails when running ram test. Here is the log dump northbridge: 00: 06 11 23 31 06 00 30 02 00 00 00 06 00 00 00 00 10: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 40: 00 18 88 80 82 44 00 00 18 99 88 80 82 44 00 00 50: c8 de cf 88 c0 04 00 00 6c 00 08 08 10 10 00 00 60: 0a 00 00 00 e6 32 01 20 c5 25 43 58 00 44 00 00 70: 82 48 00 01 01 08 50 00 01 00 00 00 00 00 02 02 80: 00 61 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 02 c0 20 00 01 02 00 1f 00 00 00 00 00 02 00 00 b0: 00 00 00 00 80 00 00 00 68 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 01 00 40 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 03 13 00 00 00 00 00 00 00 00 Done. Testing SDRAM : 00000000-0009ffff SDRAM fill: 0009ffff SDRAM verify: 00000000:00001000 00000004:00001004 00000008:00001008 0000000c:0000100c 00000010:00001010 00000014:00001014 00000018:00001018 0000001c:0000101c 00000020:00001020 00000024:00001024 00000028:00001028 0000002c:0000102c 00000030:00001030 00000034:00001034 00000038:00001038 0000003c:0000103c Too many errors. BTW, normal bios doesn't have this problem. And I have also compared settings between regular and LinuxBIOS bios, even double check with DDR init sequence. I haven't found anything strange yet. Have any seen this kind of strange behavior? -Andrew -- Andrew Ip Email: aip(a)cwlinux.com Tel: (852) 2542 2046 Fax: (852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax: (852)2542 2036 For public pgp key, please obtain it from http://www.keyserver.net/en.

1 0

Re: K8 + 2.4.21 + Tyan S2880
by YhLu 15 Jul '03

15 Jul '03

Eric, Thanks, I change 8k to 40k and it works. Because I put the elf in hda1. In the Config of Ehterboot, I have set BOOT_FIRST=BOOT_DISK and BOOT_SECOND=BOOT_NIC. In the fallback track, It works great and if HD is not there is will boot from Network. About the normal boot, it seems there some problems. After change the cmos.conf. boot_option=Normal boot_first=HDD boot_second=HDD boot_third=Network Then corresponding to BOOT_FIRST it says that "Wrong index" ??? When the HDD is present, it works as touch pci_ide (find one HD and print "Wrong index")/ isa_ide/ pci_ide and load image from ide. And When the HDD is not present , it works as touch pci_ide/isa_ide/pci_nic and load image from ide. Is it because boot_first should be set Network fixedly? In the main.c of Etherboot, it only at state=3 and index=0 and type mismatched can print such "Wrong index", It is a bug in Etherboot 5.1.8.? Regards Yinghai Lu -----邮件原件----- 发件人: ebiederman(a)lnxi.com [mailto:ebiederman@lnxi.com] 发送时间: 2003年7月14日 18:21 收件人: YhLu 抄送: ron minnich; linuxbios(a)clustermatic.org 主题: Re: K8 + 2.4.21 + SuSE 64-bit mode + Arima HDAMA + 49LF040 + MTD YhLu <YhLu(a)tyan.com> writes: > Eric, > > I have tried to build the tg3--ide_disk.zelf and use it in fallback and > normal but all failed. > > In fallback track: > It said: Searching for image...................................<abort> > > In Normal track: > It said: Wrong index > I have use to cmos_util to change boot track and BOOT_FIRST=HDD and > BOOT_SECOND=Network. Yes. It only pays attention to the variables in Normal mode. > When building tg3--ide_disk.zelf, I used BOOT_FIRST=IDE and BOOT_SECOND=NIC. > > What kind of image in HDD that eltherboot wound want? An ELF image within 8K from the start of the DISK. Imperfect but it works. Eric

2 1

ide-spinup.patch
by Devi Priya 15 Jul '03

15 Jul '03

Hello, I am using the kernel version 2.4.18-14. I guess the patch ide-spinup.patch is given for 2.4.7 . Can I apply the same patch to the kernel 2.4.18-14? Else what patch shall I apply for 2.4.18-14? Plzzz help me. Thanks in advance for any help! _________________________________________________________________ It's new, it's here! It's full of fun! http://server1.msn.co.in/sp03/messengerpromo/index.asp MSN Messenger V6.0

1 0

Re: K8 + 2.4.21 + SuSE 64-bit mode + Arima HDAMA + 49LF040 + MTD
by YhLu 14 Jul '03

14 Jul '03

Eric, I have tried to build the tg3--ide_disk.zelf and use it in fallback and normal but all failed. In fallback track: It said: Searching for image...................................<abort> In Normal track: It said: Wrong index I have use to cmos_util to change boot track and BOOT_FIRST=HDD and BOOT_SECOND=Network. When building tg3--ide_disk.zelf, I used BOOT_FIRST=IDE and BOOT_SECOND=NIC. What kind of image in HDD that eltherboot wound want? Regards Yinghai Lu Fallback: Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 Found ELF candiate at offset 0 Loading Etherboot version: 5.1.8 Dropping non PT_LOAD segment New segment addr 0x20000 size 0x3586f offset 0xb0 filesize 0x5d65 (cleaned up) New segment addr 0x20000 size 0x3586f offset 0xb0 filesize 0x5d65 Loading Segment: addr: 0x0000000000020000 memsz: 0x000000000003586f filesz: 0x00 00000000005d65 Clearing Segment: addr: 0x0000000000025d65 memsz: 0x000000000002fb0a Jumping to boot code at 0x20000 ROM segment 0x33cc length 0x9842 reloc 0x00020000 CPU 1859 Mhz Etherboot 5.1.8 (GPL) Tagged ELF (Multiboot) for [TG3][IDE] Relocating _text from: [00025d70,00056480) to [5ffcf8f0,60000000) Probing pci disk... [IDE]disk-1 80043264k cap: 2f00 Searching for image... ................................<abort> Probing pci disk... [IDE]Probing isa disk... Probing pci nic... [TG3]Cannot find PowerManagement capability, aborting. [TG3]Ethernet addr: 00:E0:81:52:6C:56 Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) Link is up at 100 Mbps, half duplex. Searching for server (DHCP)... ..Me: 192.168.1.200, Server: 192.168.1.1, Gateway 192.168.1.1 Loading 192.168.1.1:ram0_2.5_2.4.21_k8_lsi_mydisk4.elf ...(ELF).. Normal: Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 Found ELF candiate at offset 0 Loading Etherboot version: 5.1.8 Dropping non PT_LOAD segment New segment addr 0x20000 size 0x3586f offset 0xb0 filesize 0x5d65 (cleaned up) New segment addr 0x20000 size 0x3586f offset 0xb0 filesize 0x5d65 Loading Segment: addr: 0x0000000000020000 memsz: 0x000000000003586f filesz: 0x00 00000000005d65 Clearing Segment: addr: 0x0000000000025d65 memsz: 0x000000000002fb0a Jumping to boot code at 0x20000 ROM segment 0x0000 length 0x0000 reloc 0x00020000 CPU 1870 Mhz Etherboot 5.1.8 (GPL) Tagged ELF (Multiboot) for [TG3][IDE] Relocating _text from: [00025d70,00056480) to [5ffcf8f0,60000000) Probing pci disk... [IDE]disk-1 80043264k cap: 2f00 Wrong index Probing pci disk... [IDE]Probing isa disk... Probing pci nic... [TG3]Cannot find PowerManagement capability, aborting. [TG3]Ethernet addr: 00:E0:81:52:6C:56 Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) Link is up at 100 Mbps, half duplex. Searching for server (DHCP)... ..Me: 192.168.1.200, Server: 192.168.1.1, Gateway 192.168.1.1 Loading 192.168.1.1:ram0_2.5_2.4.21_k8_lsi_mydisk4.elf ...(ELF)... ............. ...........................................................................

2 1

← Newer
1
...
8
9
10
11
12
13
14
15
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot July 2003