On Mon, Jul 14, 2008 at 6:00 PM, Peter Stuge peter@stuge.se wrote:
Hi Star,
It is often considered quite unpolite to cross-post to several mailing lists, unless the issue genuinely requires all different list participants to be involved.
Yes, I agree with you, I won't do it in the future :)
On Mon, Jul 14, 2008 at 04:02:42PM +0800, Star Liu wrote:
I know from cpu manual that when machine starts, it executes instruction at FFFFFFF0, and then execute some code at FFFF0000-FFFFFFF0, i hope i can get these machine code directly from my memory, any tool to help me display the hexadecimal or binary content?
I suggest you use flashrom to read the contents of your system firmware flash chip into a file. Then you can use xxd or hexdump -C to print the contents of that file. See more about flashrom on: http://coreboot.org/Flashrom
thank you, but i'm the unlucky one whose PC is not supported by flashrom :)
//Peter
-- coreboot mailing list coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot