On 23.10.2015 21:15, Martin Roth wrote:
I like what I understand Nico's proposal to be: Store the SPD data as a c struct with all of the different JEDEC fields broken out. it would relatively trivial to compile this into an SPD binary, or it can be used in whatever other fashion is desired. A tool to convert from a binary SPD to the structure file would be desirable to help the transition, but it's out of the build path.
I believe this satisfies all the requirements:
- It's easy to review differences.
- It can be be built with no new tools.
- The fields are broken out, so you can actually tell what you're doing.
Now that would be a nice way to combine the benefits of diffable source and no-tool builds.
Ron, is that solution is acceptable to you?
Side note: There is a tool called decode-dimms which can be fed with binary SPD dumps. It decodes everything in the SPD and could serve as a nice way to verify the output of Ron's magic SPD tool.
Regards, Carl-Daniel
On Fri, Oct 23, 2015 at 12:44 PM, ron minnich rminnich@gmail.com wrote:
Aaron is my hero :-)
ron
On Fri, Oct 23, 2015 at 11:35 AM Aaron Durbin adurbin@google.com wrote:
This one's for Ron.
On Fri, Oct 23, 2015 at 10:32 AM, ron minnich rminnich@gmail.com wrote:
Build the tool in go. It's trivial. If you have an idea how it ought to work I can set it up in the playground in a few minutes.
ron
On Fri, Oct 23, 2015 at 8:24 AM Patrick Georgi pgeorgi@google.com wrote:
Hi,
Some mainboards come with soldered-on memory without SPD ROM. For these, we carry the SPD data in coreboot.
Currently, they're stored in a hexdump format that is then converted to binary at build time. The various mechanisms of doing so fail on some platform or another:
- "echo -e -n $stuff" isn't well-liked by some shells (emits "e -n
$stuff")
- "printf '\x42'" isn't well-liked by some shells (or /usr/bin/printf
tools) that don't support hexadecimal formats
- "printf '\0377'" isn't well-liked by some non-conforming, but
existing shells
- xxd -rg1 $file > $file.bin requires xxd, which comes with vim and
may just not exist
I see essentially two ways out of this, before we can start reducing duplication across the tree in that area: We could build our own tool to parse hex files and dump binary, or we could ship SPD data as binary from the start (and only have to concatenate them).
The second option has the appeal of being much simpler (and there isn't really a "preferred form" for editing SPD data that I'm aware of
- is there?), but looks icky at a glance because it's binary (but it's
really just as impenetrable as the equivalent hexdump).
So what do these files contain? Parameters (as in: facts) about the hardware's size, layout, and timing, and a bunch of vendor/model identifier strings.
So, is there a third option that I'm missing? Other opinions? Patrick