http://www.pcengines.ch/apu.htm
apu platform The PC Engines apu system board is a big step up in performance and capacity from the popular ALIX series. Applications: Routers, firewalls, VOIP, dedicated servers, special purpose network plumbing, education tools... CPU: AMD G series T40N or T40E APU, 1 GHz dual core (Bobcat core) with 64 bit support, 32K data + 32K instruction + 512KB L2 cache per core DRAM: 2 GB DDR3-1066 DRAM Storage: Boot from SD card (connected through USB), external USB or m-SATA SSD. 1 SATA data + power connector. Power: About 6 to 12W of 12V DC power depending on CPU load. Expansion: 2 miniPCI express (one with SIM socket for 3G modem), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD/TXD). Connectivity: 3 Gigabit Ethernet (Realtek RTL8111E), 1 DB9 serial port (console). Firmware: CoreBoot open source system BIOS with support for iPXE and USB boot. Form factor: 6"x6" (152.4 x 152.4 mm), fits in our case1d2*u enclosures. Cooling: Conductive cooling from the CPU and south bridge to the enclosure using a 3 mm alu heat spreader. Please contact us for advice if you want to integrate this board in your own enclosure. Status: Prototypes alive and well. Pilot run / customer samples planned for fall 2013. Production expected for early 2014. OEM options: 4 GB DDR3 DRAM, various build options, different CPU speed grades. Roadmap: We will upgrade to the newer AMD Kabini / Jaguar core based SOCs, up to 2 GHz quad core (Opteron X1150), up to 4 GB ECC DRAM.