Kerry Sheh (shekairui@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/564
-gerrit
commit d1946d5dca690404bdde13f317f2fac862f7d88f Author: Kerry Sheh shekairui@gmail.com Date: Tue Feb 7 20:32:34 2012 +0800
Mainboard: Add AMD dinar mainboard.
Dinar mainboard is an AMD evaluation board for Orochi Platform family15 model 00-0f processor.
The mainbaord has dual G34 Socket, SR5690/SR5670/SR5650 and SP5100 chipsets. 16 cores InterLagos Opteron processor are supported. Windows 7 are verified on this platform.
Change-Id: Id97d35e7bca9f0d422841e23f4b762f1ed101ea0 Signed-off-by: Kerry Sheh kerry.she@amd.com Signed-off-by: Kerry Sheh shekairui@gmail.com --- src/mainboard/amd/Kconfig | 3 + src/mainboard/amd/dinar/BiosCallOuts.c | 563 ++++++++ src/mainboard/amd/dinar/BiosCallOuts.h | 79 + src/mainboard/amd/dinar/Kconfig | 203 +++ src/mainboard/amd/dinar/Makefile.inc | 38 + src/mainboard/amd/dinar/Oem.h | 79 + src/mainboard/amd/dinar/OptionsIds.h | 64 + src/mainboard/amd/dinar/acpi/cpstate.asl | 74 + src/mainboard/amd/dinar/acpi/ide.asl | 244 ++++ src/mainboard/amd/dinar/acpi/routing.asl | 311 ++++ src/mainboard/amd/dinar/acpi/sata.asl | 149 ++ src/mainboard/amd/dinar/acpi_tables.c | 320 ++++ src/mainboard/amd/dinar/agesawrapper.c | 624 ++++++++ src/mainboard/amd/dinar/agesawrapper.h | 136 ++ src/mainboard/amd/dinar/buildOpts.c | 483 +++++++ src/mainboard/amd/dinar/chip.h | 23 + src/mainboard/amd/dinar/cmos.layout | 118 ++ src/mainboard/amd/dinar/devicetree.cb | 104 ++ src/mainboard/amd/dinar/dimmSpd.c | 333 +++++ src/mainboard/amd/dinar/dsdt.asl | 1148 +++++++++++++++ src/mainboard/amd/dinar/fadt.c | 173 +++ src/mainboard/amd/dinar/get_bus_conf.c | 156 ++ src/mainboard/amd/dinar/gpio.c | 482 ++++++ src/mainboard/amd/dinar/gpio.h | 2329 ++++++++++++++++++++++++++++++ src/mainboard/amd/dinar/irq_tables.c | 122 ++ src/mainboard/amd/dinar/mainboard.c | 138 ++ src/mainboard/amd/dinar/mptable.c | 180 +++ src/mainboard/amd/dinar/platform_cfg.h | 54 + src/mainboard/amd/dinar/rd890_cfg.c | 274 ++++ src/mainboard/amd/dinar/rd890_cfg.h | 175 +++ src/mainboard/amd/dinar/reset.c | 66 + src/mainboard/amd/dinar/romstage.c | 162 +++ src/mainboard/amd/dinar/sb700_cfg.c | 142 ++ src/mainboard/amd/dinar/sb700_cfg.h | 237 +++ 34 files changed, 9786 insertions(+), 0 deletions(-)
diff --git a/src/mainboard/amd/Kconfig b/src/mainboard/amd/Kconfig index 62ae584..c6de048 100644 --- a/src/mainboard/amd/Kconfig +++ b/src/mainboard/amd/Kconfig @@ -7,6 +7,8 @@ config BOARD_AMD_DB800 bool "DB800 (Salsa)" config BOARD_AMD_DBM690T bool "DBM690T (Herring)" +config BOARD_AMD_DINAR + bool "Dinar" config BOARD_AMD_MAHOGANY bool "Mahogany" config BOARD_AMD_MAHOGANY_FAM10 @@ -39,6 +41,7 @@ endchoice
source "src/mainboard/amd/db800/Kconfig" source "src/mainboard/amd/dbm690t/Kconfig" +source "src/mainboard/amd/dinar/Kconfig" source "src/mainboard/amd/mahogany/Kconfig" source "src/mainboard/amd/mahogany_fam10/Kconfig" source "src/mainboard/amd/norwich/Kconfig" diff --git a/src/mainboard/amd/dinar/BiosCallOuts.c b/src/mainboard/amd/dinar/BiosCallOuts.c new file mode 100644 index 0000000..39e1d13 --- /dev/null +++ b/src/mainboard/amd/dinar/BiosCallOuts.c @@ -0,0 +1,563 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "agesawrapper.h" +#include "amdlib.h" +#include "BiosCallOuts.h" +#include "Ids.h" +#include "OptionsIds.h" +#include "heapManager.h" +#include "SB700.h" + +#ifndef SB_GPIO_REG01 +#define SB_GPIO_REG01 1 +#endif + +#ifndef SB_GPIO_REG24 +#define SB_GPIO_REG24 24 +#endif + +#ifndef SB_GPIO_REG27 +#define SB_GPIO_REG27 27 +#endif + +STATIC BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_ALLOCATE_BUFFER, + BiosAllocateBuffer + }, + + {AGESA_DEALLOCATE_BUFFER, + BiosDeallocateBuffer + }, + + {AGESA_DO_RESET, + BiosReset + }, + + {AGESA_LOCATE_BUFFER, + BiosLocateBuffer + }, + + {AGESA_READ_SPD, + BiosReadSpd + }, + + {AGESA_READ_SPD_RECOVERY, + BiosDefaultRet + }, + + {AGESA_RUNFUNC_ONAP, + BiosRunFuncOnAp + }, + + {AGESA_GNB_PCIE_SLOT_RESET, + BiosGnbPcieSlotReset + }, + + {AGESA_GET_IDS_INIT_DATA, + BiosGetIdsInitData + }, + + {AGESA_HOOKBEFORE_DRAM_INIT, + BiosHookBeforeDramInit + }, + + {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, + BiosHookBeforeDramInitRecovery + }, + + {AGESA_HOOKBEFORE_DQS_TRAINING, + BiosHookBeforeDQSTraining + }, + + {AGESA_HOOKBEFORE_EXIT_SELF_REF, + BiosHookBeforeExitSelfRefresh + }, +}; + +AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + UINTN i; + AGESA_STATUS CalloutStatus; + UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]); + + for (i = 0; i < CallOutCount; i++) + { + if (BiosCallouts[i].CalloutName == Func) + { + break; + } + } + + if(i >= CallOutCount) + { + return AGESA_UNSUPPORTED; + } + + CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr); + + return CalloutStatus; +} + + +CONST IDS_NV_ITEM IdsData[] = +{ + /*{ + AGESA_IDS_NV_MAIN_PLL_CON, + 0x1 + }, + { + AGESA_IDS_NV_MAIN_PLL_FID_EN, + 0x1 + }, + { + AGESA_IDS_NV_MAIN_PLL_FID, + 0x8 + }, + + { + AGESA_IDS_NV_CUSTOM_NB_PSTATE, + }, + { + AGESA_IDS_NV_CUSTOM_NB_P0_DIV_CTRL, + }, + { + AGESA_IDS_NV_CUSTOM_NB_P1_DIV_CTRL, + }, + { + AGESA_IDS_NV_FORCE_NB_PSTATE, + }, + */ + { + 0xFFFF, + 0xFFFF + } +}; + +#define NUM_IDS_ENTRIES (sizeof (IdsData) / sizeof (IDS_NV_ITEM)) + + +AGESA_STATUS BiosGetIdsInitData (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + UINTN i; + IDS_NV_ITEM *IdsPtr; + + IdsPtr = ((IDS_CALLOUT_STRUCT *) ConfigPtr)->IdsNvPtr; + + if (Data == IDS_CALLOUT_INIT) { + for (i = 0; i < NUM_IDS_ENTRIES; i++) { + IdsPtr[i].IdsNvValue = IdsData[i].IdsNvValue; + IdsPtr[i].IdsNvId = IdsData[i].IdsNvId; + } + } + return AGESA_SUCCESS; +} + + +AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + UINT32 AvailableHeapSize; + UINT8 *BiosHeapBaseAddr; + UINT32 CurrNodeOffset; + UINT32 PrevNodeOffset; + UINT32 FreedNodeOffset; + UINT32 BestFitNodeOffset; + UINT32 BestFitPrevNodeOffset; + UINT32 NextFreeOffset; + BIOS_BUFFER_NODE *CurrNodePtr; + BIOS_BUFFER_NODE *FreedNodePtr; + BIOS_BUFFER_NODE *BestFitNodePtr; + BIOS_BUFFER_NODE *BestFitPrevNodePtr; + BIOS_BUFFER_NODE *NextFreePtr; + BIOS_HEAP_MANAGER *BiosHeapBasePtr; + AGESA_BUFFER_PARAMS *AllocParams; + + AllocParams = ((AGESA_BUFFER_PARAMS *) ConfigPtr); + AllocParams->BufferPointer = NULL; + + AvailableHeapSize = BIOS_HEAP_SIZE - sizeof (BIOS_HEAP_MANAGER); + BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS; + BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS; + + if (BiosHeapBasePtr->StartOfAllocatedNodes == 0) { + /* First allocation */ + CurrNodeOffset = sizeof (BIOS_HEAP_MANAGER); + CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset); + CurrNodePtr->BufferHandle = AllocParams->BufferHandle; + CurrNodePtr->BufferSize = AllocParams->BufferLength; + CurrNodePtr->NextNodeOffset = 0; + AllocParams->BufferPointer = (UINT8 *) CurrNodePtr + sizeof (BIOS_BUFFER_NODE); + + /* Update the remaining free space */ + FreedNodeOffset = CurrNodeOffset + CurrNodePtr->BufferSize + sizeof (BIOS_BUFFER_NODE); + FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset); + FreedNodePtr->BufferSize = AvailableHeapSize - sizeof (BIOS_BUFFER_NODE) - CurrNodePtr->BufferSize; + FreedNodePtr->NextNodeOffset = 0; + + /* Update the offsets for Allocated and Freed nodes */ + BiosHeapBasePtr->StartOfAllocatedNodes = CurrNodeOffset; + BiosHeapBasePtr->StartOfFreedNodes = FreedNodeOffset; + } else { + /* Find out whether BufferHandle has been allocated on the heap. */ + /* If it has, return AGESA_BOUNDS_CHK */ + CurrNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes; + CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset); + + while (CurrNodeOffset != 0) { + CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset); + if (CurrNodePtr->BufferHandle == AllocParams->BufferHandle) { + return AGESA_BOUNDS_CHK; + } + CurrNodeOffset = CurrNodePtr->NextNodeOffset; + /* If BufferHandle has not been allocated on the heap, CurrNodePtr here points + to the end of the allocated nodes list. + */ + + } + /* Find the node that best fits the requested buffer size */ + FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes; + PrevNodeOffset = FreedNodeOffset; + BestFitNodeOffset = 0; + BestFitPrevNodeOffset = 0; + while (FreedNodeOffset != 0) { + FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset); + if (FreedNodePtr->BufferSize >= (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) { + if (BestFitNodeOffset == 0) { + /* First node that fits the requested buffer size */ + BestFitNodeOffset = FreedNodeOffset; + BestFitPrevNodeOffset = PrevNodeOffset; + } else { + /* Find out whether current node is a better fit than the previous nodes */ + BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset); + if (BestFitNodePtr->BufferSize > FreedNodePtr->BufferSize) { + BestFitNodeOffset = FreedNodeOffset; + BestFitPrevNodeOffset = PrevNodeOffset; + } + } + } + PrevNodeOffset = FreedNodeOffset; + FreedNodeOffset = FreedNodePtr->NextNodeOffset; + } /* end of while loop */ + + + if (BestFitNodeOffset == 0) { + /* If we could not find a node that fits the requested buffer */ + /* size, return AGESA_BOUNDS_CHK */ + return AGESA_BOUNDS_CHK; + } else { + BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset); + BestFitPrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitPrevNodeOffset); + + /* If BestFitNode is larger than the requested buffer, fragment the node further */ + if (BestFitNodePtr->BufferSize > (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) { + NextFreeOffset = BestFitNodeOffset + AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE); + + NextFreePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextFreeOffset); + NextFreePtr->BufferSize = BestFitNodePtr->BufferSize - (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE)); + NextFreePtr->NextNodeOffset = BestFitNodePtr->NextNodeOffset; + } else { + /* Otherwise, next free node is NextNodeOffset of BestFitNode */ + NextFreeOffset = BestFitNodePtr->NextNodeOffset; + } + + /* If BestFitNode is the first buffer in the list, then update + StartOfFreedNodes to reflect the new free node + */ + if (BestFitNodeOffset == BiosHeapBasePtr->StartOfFreedNodes) { + BiosHeapBasePtr->StartOfFreedNodes = NextFreeOffset; + } else { + BestFitPrevNodePtr->NextNodeOffset = NextFreeOffset; + } + + /* Add BestFitNode to the list of Allocated nodes */ + CurrNodePtr->NextNodeOffset = BestFitNodeOffset; + BestFitNodePtr->BufferSize = AllocParams->BufferLength; + BestFitNodePtr->BufferHandle = AllocParams->BufferHandle; + BestFitNodePtr->NextNodeOffset = 0; + + /* Remove BestFitNode from list of Freed nodes */ + AllocParams->BufferPointer = (UINT8 *) BestFitNodePtr + sizeof (BIOS_BUFFER_NODE); + } + } + + return AGESA_SUCCESS; +} + +AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + + UINT8 *BiosHeapBaseAddr; + UINT32 AllocNodeOffset; + UINT32 PrevNodeOffset; + UINT32 NextNodeOffset; + UINT32 FreedNodeOffset; + UINT32 EndNodeOffset; + BIOS_BUFFER_NODE *AllocNodePtr; + BIOS_BUFFER_NODE *PrevNodePtr; + BIOS_BUFFER_NODE *FreedNodePtr; + BIOS_BUFFER_NODE *NextNodePtr; + BIOS_HEAP_MANAGER *BiosHeapBasePtr; + AGESA_BUFFER_PARAMS *AllocParams; + + BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS; + BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS; + + AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr; + + /* Find target node to deallocate in list of allocated nodes. + Return AGESA_BOUNDS_CHK if the BufferHandle is not found + */ + AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes; + AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset); + PrevNodeOffset = AllocNodeOffset; + + while (AllocNodePtr->BufferHandle != AllocParams->BufferHandle) { + if (AllocNodePtr->NextNodeOffset == 0) { + return AGESA_BOUNDS_CHK; + } + PrevNodeOffset = AllocNodeOffset; + AllocNodeOffset = AllocNodePtr->NextNodeOffset; + AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset); + } + + /* Remove target node from list of allocated nodes */ + PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset); + PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset; + + /* Zero out the buffer, and clear the BufferHandle */ + LibAmdMemFill ((UINT8 *)AllocNodePtr + sizeof (BIOS_BUFFER_NODE), 0, AllocNodePtr->BufferSize, &(AllocParams->StdHeader)); + AllocNodePtr->BufferHandle = 0; + AllocNodePtr->BufferSize += sizeof (BIOS_BUFFER_NODE); + + /* Add deallocated node in order to the list of freed nodes */ + FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes; + FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset); + + EndNodeOffset = AllocNodeOffset + AllocNodePtr->BufferSize; + + if (AllocNodeOffset < FreedNodeOffset) { + /* Add to the start of the freed list */ + if (EndNodeOffset == FreedNodeOffset) { + /* If the freed node is adjacent to the first node in the list, concatenate both nodes */ + AllocNodePtr->BufferSize += FreedNodePtr->BufferSize; + AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset; + + /* Clear the BufferSize and NextNodeOffset of the previous first node */ + FreedNodePtr->BufferSize = 0; + FreedNodePtr->NextNodeOffset = 0; + + } else { + /* Otherwise, add freed node to the start of the list + Update NextNodeOffset and BufferSize to include the + size of BIOS_BUFFER_NODE + */ + AllocNodePtr->NextNodeOffset = FreedNodeOffset; + } + /* Update StartOfFreedNodes to the new first node */ + BiosHeapBasePtr->StartOfFreedNodes = AllocNodeOffset; + } else { + /* Traverse list of freed nodes to find where the deallocated node + should be place + */ + NextNodeOffset = FreedNodeOffset; + NextNodePtr = FreedNodePtr; + while (AllocNodeOffset > NextNodeOffset) { + PrevNodeOffset = NextNodeOffset; + if (NextNodePtr->NextNodeOffset == 0) { + break; + } + NextNodeOffset = NextNodePtr->NextNodeOffset; + NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset); + } + + /* If deallocated node is adjacent to the next node, + concatenate both nodes + */ + if (NextNodeOffset == EndNodeOffset) { + NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset); + AllocNodePtr->BufferSize += NextNodePtr->BufferSize; + AllocNodePtr->NextNodeOffset = NextNodePtr->NextNodeOffset; + + NextNodePtr->BufferSize = 0; + NextNodePtr->NextNodeOffset = 0; + } else { + /*AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset; */ + AllocNodePtr->NextNodeOffset = NextNodeOffset; + } + /* If deallocated node is adjacent to the previous node, + concatenate both nodes + */ + PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset); + EndNodeOffset = PrevNodeOffset + PrevNodePtr->BufferSize; + if (AllocNodeOffset == EndNodeOffset) { + PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset; + PrevNodePtr->BufferSize += AllocNodePtr->BufferSize; + + AllocNodePtr->BufferSize = 0; + AllocNodePtr->NextNodeOffset = 0; + } else { + PrevNodePtr->NextNodeOffset = AllocNodeOffset; + } + } + return AGESA_SUCCESS; +} + +AGESA_STATUS BiosLocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + UINT32 AllocNodeOffset; + UINT8 *BiosHeapBaseAddr; + BIOS_BUFFER_NODE *AllocNodePtr; + BIOS_HEAP_MANAGER *BiosHeapBasePtr; + AGESA_BUFFER_PARAMS *AllocParams; + + AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr; + + BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS; + BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS; + + AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes; + AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset); + + while (AllocParams->BufferHandle != AllocNodePtr->BufferHandle) { + if (AllocNodePtr->NextNodeOffset == 0) { + AllocParams->BufferPointer = NULL; + AllocParams->BufferLength = 0; + return AGESA_BOUNDS_CHK; + } else { + AllocNodeOffset = AllocNodePtr->NextNodeOffset; + AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset); + } + } + + AllocParams->BufferPointer = (UINT8 *) ((UINT8 *) AllocNodePtr + sizeof (BIOS_BUFFER_NODE)); + AllocParams->BufferLength = AllocNodePtr->BufferSize; + + return AGESA_SUCCESS; + +} + +AGESA_STATUS BiosRunFuncOnAp (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + AGESA_STATUS Status; + + Status = agesawrapper_amdlaterunaptask (Data, ConfigPtr); + return Status; +} + +AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + AGESA_STATUS Status; + UINT8 Value; + UINTN ResetType; + AMD_CONFIG_PARAMS *StdHeader; + + ResetType = Data; + StdHeader = ConfigPtr; + + // + // Perform the RESET based upon the ResetType. In case of + // WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to + // AmdResetManager. During the critical condition, where reset is required + // immediately, the reset will be invoked directly by writing 0x04 to port + // 0xCF9 (Reset Port). + // + switch (ResetType) { + case WARM_RESET_WHENEVER: + case COLD_RESET_WHENEVER: + break; + + case WARM_RESET_IMMEDIATELY: + case COLD_RESET_IMMEDIATELY: + Value = 0x06; + LibAmdIoWrite (AccessWidth8, 0xCf9, &Value, StdHeader); + break; + + default: + break; + } + + Status = 0; + return Status; +} + +AGESA_STATUS BiosReadSpd (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + AGESA_STATUS Status; + Status = AmdMemoryReadSPD (Func, Data, (AGESA_READ_SPD_PARAMS *)ConfigPtr); + + return Status; +} + +AGESA_STATUS BiosDefaultRet (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + return AGESA_UNSUPPORTED; +} +/* Call the host environment interface to provide a user hook opportunity. */ +AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + return AGESA_SUCCESS; +} +/* Call the host environment interface to provide a user hook opportunity. */ +AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + AGESA_STATUS Status; + UINTN FcnData; + MEM_DATA_STRUCT *MemData; + UINT32 AcpiMmioAddr; + UINT32 GpioMmioAddr; + UINT8 Data8; + UINT16 Data16; + UINT8 TempData8; + + FcnData = Data; + MemData = ConfigPtr; + + Status = AGESA_SUCCESS; + /* Get SB MMIO Base (AcpiMmioAddr) */ + WriteIo8 (0xCD6, 0x27); + Data8 = ReadIo8(0xCD7); + Data16 = Data8<<8; + WriteIo8 (0xCD6, 0x26); + Data8 = ReadIo8(0xCD7); + Data16 |= Data8; + AcpiMmioAddr = (UINT32)Data16 << 16; + GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; + Status = AGESA_SUCCESS; + return Status; +} + +/* Call the host environment interface to provide a user hook opportunity. */ +AGESA_STATUS BiosHookBeforeDramInitRecovery (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + return AGESA_SUCCESS; +} +/* Call the host environment interface to provide a user hook opportunity. */ +AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + return AGESA_SUCCESS; +} +/* PCIE slot reset control */ +AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + AGESA_STATUS Status; + + Status = AGESA_SUCCESS; + return Status; +} diff --git a/src/mainboard/amd/dinar/BiosCallOuts.h b/src/mainboard/amd/dinar/BiosCallOuts.h new file mode 100644 index 0000000..22451aa --- /dev/null +++ b/src/mainboard/amd/dinar/BiosCallOuts.h @@ -0,0 +1,79 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BIOS_CALLOUT_H_ +#define _BIOS_CALLOUT_H_ + +#include "Porting.h" +#include "AGESA.h" + +#define BIOS_HEAP_START_ADDRESS 0x00010000 +#define BIOS_HEAP_SIZE 0x20000 /* 64MB */ + +typedef struct _BIOS_HEAP_MANAGER { + //UINT32 AvailableSize; + UINT32 StartOfAllocatedNodes; + UINT32 StartOfFreedNodes; +} BIOS_HEAP_MANAGER; + +typedef struct _BIOS_BUFFER_NODE { + UINT32 BufferHandle; + UINT32 BufferSize; + UINT32 NextNodeOffset; +} BIOS_BUFFER_NODE; +/* + * CALLOUTS + */ +AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr); + +/* REQUIRED CALLOUTS + * AGESA ADVANCED CALLOUTS - CPU + */ +AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +AGESA_STATUS BiosLocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +AGESA_STATUS BiosRunFuncOnAp (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +AGESA_STATUS BiosGetIdsInitData (UINT32 Func, UINT32 Data, VOID *ConfigPtr); + +/* AGESA ADVANCED CALLOUTS - MEMORY */ +AGESA_STATUS BiosReadSpd (UINT32 Func,UINT32 Data,VOID *ConfigPtr); + +/* BIOS DEFAULT RET */ +AGESA_STATUS BiosDefaultRet (UINT32 Func, UINT32 Data, VOID *ConfigPtr); + +/* Call the host environment interface to provide a user hook opportunity. */ +AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +/* Call the host environment interface to provide a user hook opportunity. */ +AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +/* Call the host environment interface to provide a user hook opportunity. */ +AGESA_STATUS BiosHookBeforeDramInitRecovery (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +/* Call the host environment interface to provide a user hook opportunity. */ +AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +/* PCIE slot reset control */ +AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +#define SB_GPIO_REG02 2 +#define SB_GPIO_REG09 9 +#define SB_GPIO_REG10 10 +#define SB_GPIO_REG15 15 +#define SB_GPIO_REG17 17 +#define SB_GPIO_REG21 21 +#define SB_GPIO_REG25 25 +#define SB_GPIO_REG28 28 +#endif //_BIOS_CALLOUT_H_ diff --git a/src/mainboard/amd/dinar/Kconfig b/src/mainboard/amd/dinar/Kconfig new file mode 100644 index 0000000..d354a49 --- /dev/null +++ b/src/mainboard/amd/dinar/Kconfig @@ -0,0 +1,203 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +if BOARD_AMD_DINAR + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select ARCH_X86 + select CPU_AMD_AGESA_FAMILY15 + select CPU_AMD_SOCKET_G34 + select NORTHBRIDGE_AMD_AGESA_FAMILY15_ROOT_COMPLEX + select NORTHBRIDGE_AMD_AGESA_FAMILY15 + select NORTHBRIDGE_AMD_CIMX_RD890 + select SOUTHBRIDGE_AMD_CIMX_SB700 + select SUPERIO_SMSC_SCH4037 + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select LIFT_BSP_APIC_ID + select SERIAL_CPU_INIT + select BOARD_ROMSIZE_KB_2048 + select BOARD_HAS_FADT + select HAVE_BUS_CONFIG + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_MAINBOARD_RESOURCES + select HAVE_HARD_RESET + select HAVE_ACPI_TABLES + #TODO select HAVE_ACPI_RESUME + select ENABLE_APIC_EXT_ID + select TINY_BOOTBLOCK + select GFXUMA + +config MAINBOARD_DIR + string + default amd/dinar + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "Dinar" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 64 + +config MAX_PHYSICAL_CPUS + int + default 16 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config IRQ_SLOT_COUNT + int + default 11 + +config RAMTOP + hex + default 0x1000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config STACK_SIZE + hex + default 0x10000 + +config ACPI_SSDTX_NUM + int + default 0 + +config RAMBASE + hex + default 0x200000 + +config SIO_PORT + hex + default 0x2e + +config DRIVERS_PS2_KEYBOARD + bool + default y + +config WARNINGS_ARE_ERRORS + bool + default n + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config VGA_BIOS + bool + default n + +config VGA_BIOS_ID + depends on VGA_BIOS + default "1002,515e" + +config AHCI_BIOS + bool + default y + +config AHCI_BIOS_FILE + string "AHCI ROM path and filename" + depends on AHCI_BIOS + default "site-local/ahci/sb700.bin" + +config AHCI_BIOS_ID + string "AHCI device PCI IDs" + depends on AHCI_BIOS + default "1002,4391" + +config XHC_BIOS + bool + default n + +config XHC_BIOS_FILE + string "XHC BIOS path and filename" + depends on XHC_BIOS + default "site-local/xhc/Xhc.rom" + +config XHC_BIOS_ID + string "XHC device PCI IDs" + depends on XHC_BIOS + default "1022,7812" + +config CONSOLE_POST + bool + depends on !NO_POST + default n + +config SATA_CONTROLLER_MODE + hex + default 0x0 + depends on SOUTHBRIDGE_AMD_CIMX_SB700 + +config ONBOARD_LAN + bool + default y + +config ONBOARD_1394 + bool + default y + +config ONBOARD_USB30 + bool + default n + +config ONBOARD_BLUETOOTH + bool + default y + +config ONBOARD_WEBCAM + bool + default y + +config ONBOARD_TRAVIS + bool + default y + +config ONBOARD_LIGHTSENSOR + bool + default n + +config PCI_ROM_RUN + bool + default n + +config UDELAY_IO + bool + default n + +config REDIRECT_CIMX_TRACE_TO_SERIAL + bool "Redirect CIMX Trace to serial console" + default y + +endif # BOARD_AMD_DINAR diff --git a/src/mainboard/amd/dinar/Makefile.inc b/src/mainboard/amd/dinar/Makefile.inc new file mode 100644 index 0000000..e078df7 --- /dev/null +++ b/src/mainboard/amd/dinar/Makefile.inc @@ -0,0 +1,38 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +romstage-y += buildOpts.c +romstage-y += agesawrapper.c +romstage-y += dimmSpd.c +romstage-y += BiosCallOuts.c +romstage-y += sb700_cfg.c +romstage-y += rd890_cfg.c + +ramstage-y += buildOpts.c +ramstage-y += agesawrapper.c +ramstage-y += dimmSpd.c +ramstage-y += BiosCallOuts.c +ramstage-y += sb700_cfg.c +ramstage-y += rd890_cfg.c + +ramstage-y += reset.c + +AGESA_PREFIX ?= $(src)/vendorcode/amd/agesa +AGESA_ROOT ?= $(AGESA_PREFIX)/$(if $(CONFIG_CPU_AMD_AGESA_FAMILY15),f15,\ + echo `wrong configuration`) diff --git a/src/mainboard/amd/dinar/Oem.h b/src/mainboard/amd/dinar/Oem.h new file mode 100644 index 0000000..67b1314 --- /dev/null +++ b/src/mainboard/amd/dinar/Oem.h @@ -0,0 +1,79 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _AMD_SB_CIMx_OEM_H_ +#define _AMD_SB_CIMx_OEM_H_ + +#define MOVE_PCIEBAR_TO_F0000000 + +#define LEGACY_FREE 0x00 + +/** + * PCIEX_BASE_ADDRESS - Define PCIE base address + * + * @param[Option] MOVE_PCIEBAR_TO_F0000000 Set PCIe base address to 0xF7000000 + */ +#ifdef MOVE_PCIEBAR_TO_F0000000 +#define PCIEX_BASE_ADDRESS 0xF8000000 +#else +#define PCIEX_BASE_ADDRESS 0xE0000000 +#endif + + +#define SMBUS0_BASE_ADDRESS 0xB00 +#define SMBUS1_BASE_ADDRESS 0xB20 +#define SIO_PME_BASE_ADDRESS 0xE00 +#define SPI_BASE_ADDRESS 0xFEC10000 + +#define WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 // Watchdog Timer Base Address +#define HPET_BASE_ADDRESS 0xFED00000 // HPET Base address + +#define PM1_EVT_BLK_ADDRESS 0x800 // AcpiPm1EvtBlkAddr; +#define PM1_CNT_BLK_ADDRESS 0x804 // AcpiPm1CntBlkAddr; +#define PM1_TMR_BLK_ADDRESS 0x808 // AcpiPmTmrBlkAddr; +#define CPU_CNT_BLK_ADDRESS 0x810 // CpuControlBlkAddr; +#define GPE0_BLK_ADDRESS 0x820 // AcpiGpe0BlkAddr; +#define SMI_CMD_PORT 0xB0 // SmiCmdPortAddr; +#define ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 // AcpiPmaCntBlkAddr; + +#define EC_LDN5_MAILBOX_ADDRESS 0x550 +#define EC_LDN5_IRQ 0x05 +#define EC_LDN9_MAILBOX_ADDRESS 0x3E + +#define SATA_IDE_MODE_SSID 0x43901002 +#define SATA_RAID_MODE_SSID 0x43921002 +#define SATA_RAID5_MODE_SSID 0x43931002 +#define SATA_AHCI_SSID 0x43911002 +#define OHCI0_SSID 0x43971002 +#define OHCI1_SSID 0x43981002 +#define EHCI0_SSID 0x43961002 +#define OHCI2_SSID 0x43971002 +#define OHCI3_SSID 0x43981002 +#define EHCI1_SSID 0x43961002 +#define OHCI4_SSID 0x43991002 + +#define SMBUS_SSID 0x43851002 +#define IDE_SSID 0x439C1002 +#define AZALIA_SSID 0x43831002 +#define LPC_SSID 0x439D1002 +#define P2P_SSID 0x43841002 + +#define RESERVED_VALUE 0x00 + +#endif //ifndef _AMD_SB_CIMx_OEM_H_ diff --git a/src/mainboard/amd/dinar/OptionsIds.h b/src/mainboard/amd/dinar/OptionsIds.h new file mode 100644 index 0000000..e1d397e --- /dev/null +++ b/src/mainboard/amd/dinar/OptionsIds.h @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ + */ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * IDSOPT_TRACING_ENABLED + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * + **/ + +//#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_ASSERT_ENABLED TRUE + +//#define IDSOPT_DEBUG_ENABLED FALSE +//#undef IDSOPT_HOST_SIMNOW +//#define IDSOPT_HOST_SIMNOW FALSE +//#undef IDSOPT_HOST_HDT +//#define IDSOPT_HOST_HDT FALSE +//#define IDS_DEBUG_PORT 0x80 + +#endif diff --git a/src/mainboard/amd/dinar/acpi/cpstate.asl b/src/mainboard/amd/dinar/acpi/cpstate.asl new file mode 100644 index 0000000..64b3f16 --- /dev/null +++ b/src/mainboard/amd/dinar/acpi/cpstate.asl @@ -0,0 +1,74 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file defines the processor and performance state capability + * for each core in the system. It is included into the DSDT for each + * core. It assumes that each core of the system has the same performance + * characteristics. +*/ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) + { + Scope (_PR) { + Processor(CPU0,0,0x808,0x06) { + #include "cpstate.asl" + } + Processor(CPU1,1,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU2,2,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU3,3,0x0,0x0) { + #include "cpstate.asl" + } + } +*/ + /* P-state support: The maximum number of P-states supported by the */ + /* CPUs we'll use is 6. */ + Name(_PSS, Package(){ + Package () + { + 0x00000AF0, + 0x0000BF81, + 0x00000002, + 0x00000002, + 0x00000000, + 0x00000000 + }, + + Package () + { + 0x00000578, + 0x000076F2, + 0x00000002, + 0x00000002, + 0x00000001, + 0x00000001 + } + }) + + Name(_PCT, Package(){ + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} + }) + + Method(_PPC, 0){ + Return(0) + } diff --git a/src/mainboard/amd/dinar/acpi/ide.asl b/src/mainboard/amd/dinar/acpi/ide.asl new file mode 100644 index 0000000..765a67e --- /dev/null +++ b/src/mainboard/amd/dinar/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/amd/dinar/acpi/routing.asl b/src/mainboard/amd/dinar/acpi/routing.asl new file mode 100644 index 0000000..c7a9165 --- /dev/null +++ b/src/mainboard/amd/dinar/acpi/routing.asl @@ -0,0 +1,311 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, INTC, 0 }, + Package(){0x0001FFFF, 1, INTD, 0 }, + /* Bus 0, Dev 2 - */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - */ + Package(){0x0003FFFF, 0, INTD, 0 }, + Package(){0x0003FFFF, 1, INTA, 0 }, + Package(){0x0003FFFF, 2, INTB, 0 }, + Package(){0x0003FFFF, 3, INTC, 0 }, + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, INTB, 0 }, + Package(){0x0005FFFF, 1, INTC, 0 }, + Package(){0x0005FFFF, 2, INTD, 0 }, + Package(){0x0005FFFF, 3, INTA, 0 }, + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + + /* SB devices */ + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 18,19,22 - USB: OHCI,EHCI */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + Package(){0x0010FFFF, 0, INTC, 0 }, + Package(){0x0010FFFF, 1, INTB, 0 }, + /* Bus 0, Dev 17 - SATA controller #2 */ + Package(){0x0011FFFF, 0, INTD, 0 }, + /* Bus 0, Dev 21 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0015FFFF, 0, INTA, 0 }, + Package(){0x0015FFFF, 1, INTB, 0 }, + Package(){0x0015FFFF, 2, INTC, 0 }, + Package(){0x0015FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, 0, 18 }, + Package(){0x0001FFFF, 1, 0, 19 }, + /* Bus 0, Dev 2 */ + Package(){0x0002FFFF, 0, 0, 18 }, + Package(){0x0002FFFF, 1, 0, 19 }, + Package(){0x0002FFFF, 2, 0, 16 }, + Package(){0x0002FFFF, 3, 0, 17 }, + /* Bus 0, Dev 3 */ + Package(){0x0003FFFF, 0, 0, 19 }, + Package(){0x0003FFFF, 1, 0, 16 }, + Package(){0x0003FFFF, 2, 0, 17 }, + Package(){0x0003FFFF, 3, 0, 18 }, + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + Package(){0x0004FFFF, 1, 0, 17 }, + Package(){0x0004FFFF, 2, 0, 18 }, + Package(){0x0004FFFF, 3, 0, 19 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, 0, 17 }, + Package(){0x0005FFFF, 1, 0, 18 }, + Package(){0x0005FFFF, 2, 0, 19 }, + Package(){0x0005FFFF, 3, 0, 16 }, + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + Package(){0x0006FFFF, 0, 0, 18 }, + Package(){0x0006FFFF, 1, 0, 19 }, + Package(){0x0006FFFF, 2, 0, 16 }, + Package(){0x0006FFFF, 3, 0, 17 }, + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + Package(){0x0007FFFF, 0, 0, 19 }, + Package(){0x0007FFFF, 1, 0, 16 }, + Package(){0x0007FFFF, 2, 0, 17 }, + Package(){0x0007FFFF, 3, 0, 18 }, + + /* SB devices in APIC mode */ + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Bus 0, Dev 18,19,22 - USB: OHCI,EHCI*/ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + Package(){0x0010FFFF, 0, 0, 18 }, + Package(){0x0010FFFF, 1, 0, 17 }, + /* Bus 0, Dev 17 - SATA controller #2 */ + Package(){0x0011FFFF, 0, 0, 19 }, + /* Bus 0, Dev 21 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0015FFFF, 0, 0, 16 }, + Package(){0x0015FFFF, 1, 0, 17 }, + Package(){0x0015FFFF, 2, 0, 18 }, + Package(){0x0015FFFF, 3, 0, 19 }, + }) + + Name(PS2, Package(){ + /* For Device(PBR2) PIC mode*/ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS2, Package(){ + /* For Device(PBR2) APIC mode*/ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS3, Package(){ + /* For Device(PBR3) PIC mode*/ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS3, Package(){ + /* For Device(PBR3) APIC mode*/ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PS4, Package(){ + /* For Device(PBR4) PIC mode*/ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + + Name(APS4, Package(){ + /* For Device(PBR4) APIC mode*/ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* For Device(PBR5) PIC mode*/ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + + Name(APS5, Package(){ + /* For Device(PBR5) APIC mode*/ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* For Device(PBR6) PIC mode*/ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS6, Package(){ + /* For Device(PBR6) APIC mode*/ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* For Device(PBR7) PIC mode*/ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS7, Package(){ + /* For Device(PBR7) APIC mode*/ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PE0, Package(){ + /* For Device(PE20) PIC mode*/ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + + Name(APE0, Package(){ + /* For Device(PE20) APIC mode*/ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PE1, Package(){ + /* For Device(PE21) PIC mode*/ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + + Name(APE1, Package(){ + /* For Device(PE21) APIC mode*/ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PE2, Package(){ + /* For Device(PE22) PIC mode*/ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APE2, Package(){ + /* For Device(PE22) APIC mode*/ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE3, Package(){ + /* For Device(PE23) PIC mode*/ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APE3, Package(){ + /* For Device(PE23) APIC mode*/ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) +} diff --git a/src/mainboard/amd/dinar/acpi/sata.asl b/src/mainboard/amd/dinar/acpi/sata.asl new file mode 100644 index 0000000..32b9cd9 --- /dev/null +++ b/src/mainboard/amd/dinar/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/amd/dinar/acpi_tables.c b/src/mainboard/amd/dinar/acpi_tables.c new file mode 100644 index 0000000..ee00e81 --- /dev/null +++ b/src/mainboard/amd/dinar/acpi_tables.c @@ -0,0 +1,320 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <arch/io.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> + +#include "agesawrapper.h" + +#define DUMP_ACPI_TABLES 0 + +#if DUMP_ACPI_TABLES == 1 +static void dump_mem(u32 start, u32 end) +{ + + u32 i; + print_debug("dump_mem:"); + for (i = start; i < end; i++) { + if ((i & 0xf) == 0) { + printk(BIOS_DEBUG, "\n%08x:", i); + } + printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i)); + } + print_debug("\n"); +} +#endif + +extern const unsigned char AmlCode[]; + + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + device_t dev; + u32 dword; + u32 gsi_base = 0; + u32 apicid_sb700; + u32 apicid_rd890; + + /* + * AGESA v5 Apply apic enumeration rules + * For systems with >= 16 APICs, put the IO-APICs at 0..n and + * put the local-APICs at m..z + * For systems with < 16 APICs, put the Local-APICs at 0..n and + * put the IO-APICs at (n + 1)..z + */ +#if CONFIG_MAX_CPUS >= 16 + apicid_sb700 = 0x0; +#else + apicid_sb700 = CONFIG_MAX_CPUS + 1 +#endif + apicid_rd890 = apicid_sb700 + 1; + + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write sb700 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + apicid_sb700, + IO_APIC_ADDR, + 0 + ); + + /* IOAPIC on rs5690 */ + gsi_base += IO_APIC_INTERRUPTS; /* sb700 has 24 IOAPIC entries. */ + dev = dev_find_slot(0, PCI_DEVFN(0, 0)); + if (dev) { + pci_write_config32(dev, 0xF8, 0x1); + dword = pci_read_config32(dev, 0xFC) & 0xfffffff0; + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + apicid_rd890, + dword, + gsi_base + ); + } + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current, + 0, //BUS + 0, //SOURCE + 2, //gsirq + 0 //flags + ); + + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edige-triggered, Active high */ + + /* create all subtables for processors */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0, 5, 1); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 1, 5, 1); + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + int lens; + msr_t msr; + char pscope[] = "\_SB.PCI0"; + + lens = acpigen_write_scope(pscope); + msr = rdmsr(TOP_MEM); + lens += acpigen_write_name_dword("TOM1", msr.lo); + msr = rdmsr(TOP_MEM2); + /* + * Since XP only implements parts of ACPI 2.0, we can't use a qword + * here. + * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt + * slide 22ff. + * Shift value right by 20 bit to make it fit into 32bit, + * giving us 1MB granularity and a limit of almost 4Exabyte of memory. + */ + lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); + acpigen_patch_len(lens - 1); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + //acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + acpi_header_t *ssdt2; + acpi_header_t *alib; + + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ + + /* Align ACPI tables to 16 bytes */ + start = (start + 0x0f) & -0x10; + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* FACS */ + printk(BIOS_DEBUG, "ACPI: * FACS\n"); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* DSDT */ + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); + dsdt = (acpi_header_t *)current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); + /* FADT */ + printk(BIOS_DEBUG, "ACPI: * FADT\n"); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ +#ifdef UNUSED_CODE // Don't need HPET table. we have one in dsdt + current = ( current + 0x07) & -0x08; + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); +#endif + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ( current + 0x07) & -0x08; + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* SRAT */ + current = ( current + 0x07) & -0x08; + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); + if (srat != NULL) { + memcpy((void *)current, srat, srat->header.length); + srat = (acpi_srat_t *) current; + //acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); + } + + /* SLIT */ + current = ( current + 0x07) & -0x08; + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); + if (slit != NULL) { + memcpy((void *)current, slit, slit->header.length); + slit = (acpi_slit_t *) current; + //acpi_create_slit(slit); + current += slit->header.length; + acpi_add_table(rsdp, slit); + } + + /* SSDT */ + current = (current + 0x0f) & -0x10; + printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); + alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); + if (alib != NULL) { + memcpy((void *)current, alib, alib->length); + ssdt = (acpi_header_t *) current; + current += alib->length; + acpi_add_table(rsdp,alib); + } else { + printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); + } + +#if 0 // The DSDT needs additional work for the AGESA SSDT Pstate table + current = ( current + 0x0f) & -0x10; + printk(BIOS_DEBUG, "ACPI: * AGESA SSDT Pstate at %lx\n", current); + ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); + if (ssdt != NULL) { + memcpy((void *)current, ssdt, ssdt->length); + ssdt = (acpi_header_t *) current; + current += ssdt->length; + } else { + printk(BIOS_DEBUG, " AGESA SSDT table NULL. Skipping.\n"); + } + acpi_add_table(rsdp,ssdt); +#endif + + current = ( current + 0x0f) & -0x10; + printk(BIOS_DEBUG, "ACPI: * coreboot TOM SSDT2 at %lx\n", current); + ssdt2 = (acpi_header_t *) current; + acpi_create_ssdt_generator(ssdt2, ACPI_TABLE_CREATOR); + current += ssdt2->length; + acpi_add_table(rsdp,ssdt2); + +#if DUMP_ACPI_TABLES == 1 + printk(BIOS_DEBUG, "rsdp\n"); + dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); + + printk(BIOS_DEBUG, "rsdt\n"); + dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); + + printk(BIOS_DEBUG, "madt\n"); + dump_mem(madt, ((void *)madt) + madt->header.length); + + printk(BIOS_DEBUG, "srat\n"); + dump_mem(srat, ((void *)srat) + srat->header.length); + + printk(BIOS_DEBUG, "slit\n"); + dump_mem(slit, ((void *)slit) + slit->header.length); + + printk(BIOS_DEBUG, "ssdt\n"); + dump_mem(ssdt, ((void *)ssdt) + ssdt->length); + + printk(BIOS_DEBUG, "fadt\n"); + dump_mem(fadt, ((void *)fadt) + fadt->header.length); +#endif + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/amd/dinar/agesawrapper.c b/src/mainboard/amd/dinar/agesawrapper.c new file mode 100644 index 0000000..171deb8 --- /dev/null +++ b/src/mainboard/amd/dinar/agesawrapper.c @@ -0,0 +1,624 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ + +#include <stdint.h> +#include <string.h> +#include "agesawrapper.h" +#include "BiosCallOuts.h" +#include "cpuRegisters.h" +#include "cpuCacheInit.h" +#include "cpuApicUtilities.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "Dispatcher.h" +#include "cpuCacheInit.h" +#include "amdlib.h" +#include "heapManager.h" +#include "Filecode.h" +#include <arch/io.h> + +#define FILECODE UNASSIGNED_FILE_FILECODE + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ + +/* ACPI table pointers returned by AmdInitLate */ +VOID *DmiTable = NULL; +VOID *AcpiPstate = NULL; +VOID *AcpiSrat = NULL; +VOID *AcpiSlit = NULL; + +VOID *AcpiWheaMce = NULL; +VOID *AcpiWheaCmc = NULL; +VOID *AcpiAlib = NULL; + + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*--------------------------------------------------------------------------------------- + * L O C A L F U N C T I O N S + *--------------------------------------------------------------------------------------- + */ + +/*Get the Bus Number from CONFIG_MMCONF_BUS_NUMBER, Please reference AMD BIOS BKDG docuemt about it*/ +/* +BusRange: bus range identifier. Read-write. Reset: X. This specifies the number of buses in the +MMIO configuration space range. The size of the MMIO configuration space range varies with this +field as follows: the size is 1 Mbyte times the number of buses. This field is encoded as follows: +Bits Buses Bits Buses +0h 1 5h 32 +1h 2 6h 64 +2h 4 7h 128 +3h 8 8h 256 +4h 16 Fh-9h Reserved +*/ +UINT8 +GetEndBusNum ( + VOID + ) +{ + UINT64 BusNum; + UINT8 Index; + for (Index = 1; Index <= 8; Index ++ ) { + BusNum = CONFIG_MMCONF_BUS_NUMBER >> Index; + if (BusNum == 1 ) { + break; + } + } + return Index; +} + +static UINT32 amdinitcpuio(VOID) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + UINT32 TopMem; + UINT32 NodeCnt; + UINT32 Node; + UINT32 SbLink; + UINT32 Index; + + /* get the number of coherent nodes in the system */ + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 0, 0x60); + LibAmdPciRead(AccessWidth32, PciAddress, &PciData, &StdHeader); + NodeCnt = ((PciData >> 4) & 7) + 1; //NodeCnt[6:4] + /* Find out the Link ID of Node0 that connects to the + * Southbridge (system IO hub). e.g. family10 MCM Processor, + * SbLink is Processor0 Link2, internal Node0 Link3 + */ + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 0, 0x64); + LibAmdPciRead(AccessWidth32, PciAddress, &PciData, &StdHeader); + SbLink = (PciData >> 8) & 3; //assume ganged + /* Enable MMIO on AMD CPU Address Map Controller for all nodes */ + for (Node = 0; Node < NodeCnt; Node ++) { + /* clear all MMIO Mapped Base/Limit Registers */ + for (Index = 0; Index < 8; Index ++) { + PciData = 0x00000000; + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18 + Node, 1, 0x80 + Index * 8); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18 + Node, 1, 0x84 + Index * 8); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + } + /* clear all IO Space Base/Limit Registers */ + for (Index = 0; Index < 4; Index ++) { + PciData = 0x00000000; + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18 + Node, 1, 0xC0 + Index * 8); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18 + Node, 1, 0xC4 + Index * 8); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + } + + /* Enable MMIO on AMD CPU Address Map Controller */ + + /* Set VGA Ram MMIO 0000A0000-0000BFFFF to Node0 sbLink */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18 + Node, 1, 0x80); + PciData = (0xA0000 >> 8) |3; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18 + Node, 1, 0x84); + PciData = 0xB0000 >> 8; + PciData &= (~0xFF); + PciData |= SbLink << 4; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Set UMA MMIO. */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18 + Node, 1, 0x88); + LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); + TopMem = (UINT32)MsrReg; + MsrReg = (MsrReg >> 8) | 3; + PciData = (UINT32)MsrReg; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18 + Node, 1, 0x8c); + if (TopMem <= CONFIG_MMCONF_BASE_ADDRESS) { + PciData = (CONFIG_MMCONF_BASE_ADDRESS - 1) >> 8; + } + else { + PciData = (0x100000000ull - 1) >> 8; + } + PciData &= (~0xFF); + PciData |= SbLink << 4; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Set PCIE MMIO. */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18 + Node, 1, 0x90); + PciData = (CONFIG_MMCONF_BASE_ADDRESS >> 8) |3; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18 + Node, 1, 0x94); + PciData = (( CONFIG_MMCONF_BASE_ADDRESS + CONFIG_MMCONF_BUS_NUMBER * 4096 *256 - 1) >> 8) & (~0xFF); + PciData &= (~0xFF); + PciData |= MMIO_NP_BIT; + PciData |= SbLink << 4; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Set XAPIC MMIO. 24K */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18 + Node, 1, 0x98); + PciData = (0xFEC00000 >> 8) |3; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18 + Node, 1, 0x9c); + PciData = ((0xFEC00000 + 6 * 4096 - 1) >> 8); + PciData &= (~0xFF); + PciData |= MMIO_NP_BIT; + PciData |= SbLink << 4; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Set Local APIC MMIO. 4K*4= 16K, Llano CPU are 4 cores */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18 + Node, 1, 0xA0); + PciData = (0xFEE00000 >> 8) |3; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18 + Node, 1, 0xA8); + PciData = (0xFEE00000 + 4 * 4096 - 1) >> 8; + PciData &= (~0xFF); + PciData |= MMIO_NP_BIT; + PciData |= SbLink << 4; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Set PCIO: 0x0 - 0xFFF000 and enabled VGA IO*/ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18 + Node, 1, 0xC0); + PciData = 0x13; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18 + Node, 1, 0xC4); + PciData = 0x00FFF000; + PciData &= (~0x7F); + PciData |= SbLink << 4; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + } + Status = AGESA_SUCCESS; + return (UINT32)Status; +} + +UINT32 +agesawrapper_amdinitmmio ( + VOID + ) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* + Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base + Address MSR register. + */ + MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (GetEndBusNum () << 2) | 1; + LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); + + /* + Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. + */ + LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); + MsrReg = MsrReg | BIT46; + LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); + + /* Set PCIE MMIO. */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x90); + + PciData = (CONFIG_MMCONF_BASE_ADDRESS >> 8) |3; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x94); + PciData = (( CONFIG_MMCONF_BASE_ADDRESS + CONFIG_MMCONF_BUS_NUMBER * 4096 *256 - 1) >> 8) | MMIO_NP_BIT; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Enable memory access */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0x04); + LibAmdPciRead(AccessWidth8, PciAddress, &PciData, &StdHeader); + + PciData |= BIT1; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0x04); + LibAmdPciWrite(AccessWidth8, PciAddress, &PciData, &StdHeader); + + /* Set ROM cache onto WP to decrease post time */ + MsrReg = (0x0100000000 - CONFIG_ROM_SIZE) | 5; + LibAmdMsrWrite (0x20E, &MsrReg, &StdHeader); + MsrReg = (0x1000000000 - CONFIG_ROM_SIZE) | 0x800; + LibAmdMsrWrite (0x20F, &MsrReg, &StdHeader); + + Status = AGESA_SUCCESS; + return (UINT32)Status; +} + +UINT32 +agesawrapper_amdinitreset ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESET_PARAMS AmdResetParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + + LibAmdMemFill (&AmdResetParams, + 0, + sizeof (AMD_RESET_PARAMS), + &(AmdResetParams.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; + AmdParamStruct.AllocationMethod = ByHost; + AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); + AmdParamStruct.NewStructPtr = &AmdResetParams; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = NULL; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + AmdResetParams.HtConfig.Depth = 0; +#if (defined AGESA_ENTRY_INIT_RESET) && (AGESA_ENTRY_INIT_RESET == TRUE) + status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); +#endif + + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + return (UINT32)status; +} + +UINT32 +agesawrapper_amdinitearly ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_EARLY_PARAMS *AmdEarlyParamsPtr; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; + OemCustomizeInitEarly (AmdEarlyParamsPtr); + + status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return (UINT32)status; +} +/*---------------------------------------------------------------------------------------*/ +/** + * OemCustomizeInitEarly + * + * Description: + * This is the stub function will call the host environment through the binary block + * interface (call-out port) to provide a user hook opportunity + * + * Parameters: + * @param[in] **PeiServices + * @param[in] *InitEarly + * + * @retval VOID + * + **/ +/*---------------------------------------------------------------------------------------*/ +VOID OemCustomizeInitEarly(IN OUT AMD_EARLY_PARAMS *InitEarly) +{ + //InitEarly->PlatformConfig.CoreLevelingMode = CORE_LEVEL_TWO; +} + +VOID +OemCustomizeInitPost ( + IN AMD_POST_PARAMS *InitPost + ) +{ + InitPost->MemConfig.UmaMode = UMA_AUTO; + InitPost->MemConfig.BottomIo = 0xE0; + InitPost->MemConfig.UmaSize = 0xE0-0xC0; +} + +UINT32 +agesawrapper_amdinitpost ( + VOID + ) +{ + AGESA_STATUS status; + UINT16 i; + UINT32 *HeadPtr; + AMD_INTERFACE_PARAMS AmdParamStruct; + BIOS_HEAP_MANAGER *BiosManagerPtr; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + + /* OEM Should Customize the defaults through this hook */ + OemCustomizeInitPost ((AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr); + + status = AmdInitPost ((AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + /* Initialize heap space */ + BiosManagerPtr = (BIOS_HEAP_MANAGER *)BIOS_HEAP_START_ADDRESS; + + HeadPtr = (UINT32 *) ((UINT8 *) BiosManagerPtr + sizeof (BIOS_HEAP_MANAGER)); + for (i = 0; i < ((BIOS_HEAP_SIZE/4) - (sizeof (BIOS_HEAP_MANAGER)/4)); i++) + { + *HeadPtr = 0x00000000; + HeadPtr++; + } + BiosManagerPtr->StartOfAllocatedNodes = 0; + BiosManagerPtr->StartOfFreedNodes = 0; + + return (UINT32)status; +} + +UINT32 +agesawrapper_amdinitenv ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + PCI_ADDR PciAddress; + UINT32 PciValue; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + status = AmdInitEnv ((AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return (UINT32)status; +} + +VOID * +agesawrapper_getlateinitptr ( + int pick + ) +{ + switch (pick) { + case PICK_DMI: + return DmiTable; + + case PICK_PSTATE: + return AcpiPstate; + + case PICK_SRAT: + return AcpiSrat; + + case PICK_SLIT: + return AcpiSlit; + case PICK_WHEA_MCE: + return AcpiWheaMce; + case PICK_WHEA_CMC: + return AcpiWheaCmc; + case PICK_ALIB: + return AcpiAlib; + default: + return NULL; + } +} + +UINT32 +agesawrapper_amdinitmid ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + printk(BIOS_DEBUG, "file '%s',line %d, %s()\n", __FILE__, __LINE__, __func__); + /* Enable MMIO on AMD CPU Address Map Controller */ + amdinitcpuio (); + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + + status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return (UINT32)status; +} + +UINT32 +agesawrapper_amdinitlate(VOID) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_LATE_PARAMS *AmdLateParamsPtr; + + LibAmdMemFill(&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + + AmdCreateStruct (&AmdParamStruct); + AmdLateParamsPtr = (AMD_LATE_PARAMS *) AmdParamStruct.NewStructPtr; + + printk(BIOS_DEBUG, "agesawrapper_amdinitlate: AmdLateParamsPtr = %X\n", (u32)AmdLateParamsPtr); + + Status = AmdInitLate(AmdLateParamsPtr); + if (Status != AGESA_SUCCESS) { + //agesawrapper_amdreadeventlog(AmdLateParamsPtr->StdHeader.HeapStatus); + agesawrapper_amdreadeventlog(); + ASSERT(Status == AGESA_SUCCESS); + } + DmiTable = AmdLateParamsPtr->DmiTable; + AcpiPstate = AmdLateParamsPtr->AcpiPState; + AcpiSrat = AmdLateParamsPtr->AcpiSrat; + AcpiSlit = AmdLateParamsPtr->AcpiSlit; + AcpiWheaMce = AmdLateParamsPtr->AcpiWheaMce; + AcpiWheaCmc = AmdLateParamsPtr->AcpiWheaCmc; + AcpiAlib = AmdLateParamsPtr->AcpiAlib; + + printk(BIOS_DEBUG, "In %s, AGESA generated ACPI tables:\n" + " DmiTable:%p\n AcpiPstate: %p\n AcpiSrat:%p\n AcpiSlit:%p\n" + " Mce:%p\n Cmc:%p\n Alib:%p\n", + __func__, DmiTable, AcpiPstate, AcpiSrat, AcpiSlit, + AcpiWheaMce, AcpiWheaCmc, AcpiAlib); + + /* Don't release the structure until coreboot has copied the ACPI tables. + * AmdReleaseStruct (&AmdLateParams); + */ + + return (UINT32)Status; +} + +UINT32 +agesawrapper_amdlaterunaptask ( + UINT32 Data, + VOID *ConfigPtr + ) +{ + AGESA_STATUS Status; + AMD_LATE_PARAMS AmdLateParams; + + LibAmdMemFill (&AmdLateParams, + 0, + sizeof (AMD_LATE_PARAMS), + &(AmdLateParams.StdHeader)); + + AmdLateParams.StdHeader.AltImageBasePtr = 0; + AmdLateParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdLateParams.StdHeader.Func = 0; + AmdLateParams.StdHeader.ImageBasePtr = 0; + + Status = AmdLateRunApTask (&AmdLateParams); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(Status == AGESA_SUCCESS); + } + + return (UINT32)Status; +} + +UINT32 +agesawrapper_amdreadeventlog ( + VOID + ) +{ + AGESA_STATUS Status; + EVENT_PARAMS AmdEventParams; + + LibAmdMemFill (&AmdEventParams, + 0, + sizeof (EVENT_PARAMS), + &(AmdEventParams.StdHeader)); + + AmdEventParams.StdHeader.AltImageBasePtr = 0; + AmdEventParams.StdHeader.CalloutPtr = NULL; + AmdEventParams.StdHeader.Func = 0; + AmdEventParams.StdHeader.ImageBasePtr = 0; + Status = AmdReadEventLog (&AmdEventParams); + while (AmdEventParams.EventClass != 0) { + printk(BIOS_DEBUG,"\nEventLog: EventClass = %x, EventInfo = %x.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo); + printk(BIOS_DEBUG," Param1 = %x, Param2 = %x.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2); + printk(BIOS_DEBUG," Param3 = %x, Param4 = %x.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4); + Status = AmdReadEventLog (&AmdEventParams); + } + + return (UINT32)Status; +} diff --git a/src/mainboard/amd/dinar/agesawrapper.h b/src/mainboard/amd/dinar/agesawrapper.h new file mode 100644 index 0000000..6571525 --- /dev/null +++ b/src/mainboard/amd/dinar/agesawrapper.h @@ -0,0 +1,136 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ + + +#ifndef _AGESAWRAPPER_H_ +#define _AGESAWRAPPER_H_ + +#include <stdint.h> +#include "Porting.h" +#include "AGESA.h" + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ +/* Define AMD Ontario APPU SSID/SVID */ +#define AMD_APU_SVID 0x1022 +#define AMD_APU_SSID 0x1234 +#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS +#define MMIO_NP_BIT BIT7 + +/* Hudson-2 ACPI PmIO Space Define */ +#define SB_ACPI_BASE_ADDRESS 0x0400 +#define ACPI_MMIO_BASE 0xFED80000 +#define SB_CFG_BASE 0x000 // DWORD +#define GPIO_BASE 0x100 // BYTE +#define SMI_BASE 0x200 // DWORD +#define PMIO_BASE 0x300 // DWORD +#define PMIO2_BASE 0x400 // BYTE +#define BIOS_RAM_BASE 0x500 // BYTE +#define CMOS_RAM_BASE 0x600 // BYTE +#define CMOS_BASE 0x700 // BYTE +#define ASF_BASE 0x900 // DWORD +#define SMBUS_BASE 0xA00 // DWORD +#define WATCHDOG_BASE 0xB00 // ?? +#define HPET_BASE 0xC00 // DWORD +#define IOMUX_BASE 0xD00 // BYTE +#define MISC_BASE 0xE00 +#define SERIAL_DEBUG_BASE 0x1000 +#define GFX_DAC_BASE 0x1400 +#define CEC_BASE 0x1800 +#define XHCI_BASE 0x1C00 +#define ACPI_SMI_DATA_PORT 0xB1 +#define R_SB_ACPI_PM1_STATUS 0x00 +#define R_SB_ACPI_PM1_ENABLE 0x02 +#define R_SB_ACPI_PM_CONTROL 0x04 +#define R_SB_ACPI_EVENT_STATUS 0x20 +#define R_SB_ACPI_EVENT_ENABLE 0x24 +#define B_PWR_BTN_STATUS BIT8 +#define B_WAKEUP_STATUS BIT15 +#define B_SCI_EN BIT0 +#define SB_PM_INDEX_PORT 0xCD6 +#define SB_PM_DATA_PORT 0xCD7 +#define SB_PMIOA_REG24 0x24 // AcpiMmioEn +#define MmioAddress( BaseAddr, Register ) \ + ( (UINTN)BaseAddr + \ + (UINTN)(Register) \ + ) +#define Mmio32Ptr( BaseAddr, Register ) \ + ( (volatile UINT32 *)MmioAddress( BaseAddr, Register ) ) +#define Mmio32( BaseAddr, Register ) \ + *Mmio32Ptr( BaseAddr, Register ) + +enum { + PICK_DMI, /* DMI Interface */ + PICK_PSTATE, /* Acpi Pstate SSDT Table */ + PICK_SRAT, /* SRAT Table */ + PICK_SLIT, /* SLIT Table */ + PICK_WHEA_MCE, /* WHEA MCE table */ + PICK_WHEA_CMC, /* WHEA CMV table */ + PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ +}; + + + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + +typedef struct { + UINT32 CalloutName; + AGESA_STATUS (*CalloutPtr) (UINT32 Func, UINT32 Data, VOID* ConfigPtr); +} BIOS_CALLOUT_STRUCT; + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*--------------------------------------------------------------------------------------- + * L O C A L F U N C T I O N S + *--------------------------------------------------------------------------------------- + */ + +//void brazos_platform_stage(void); +UINT32 agesawrapper_amdinitreset (void); +UINT32 agesawrapper_amdinitearly (void); +UINT32 agesawrapper_amdinitenv (void); +UINT32 agesawrapper_amdinitlate (void); +UINT32 agesawrapper_amdinitpost (void); +UINT32 agesawrapper_amdinitmid (void); +void sb_After_Pci_Init (void); +void sb_Mid_Post_Init (void); +void sb_Late_Post (void); +UINT32 agesawrapper_amdreadeventlog (void); +UINT32 agesawrapper_amdinitmmio (void); +void *agesawrapper_getlateinitptr (int pick); + +#endif diff --git a/src/mainboard/amd/dinar/buildOpts.c b/src/mainboard/amd/dinar/buildOpts.c new file mode 100644 index 0000000..fd0464d --- /dev/null +++ b/src/mainboard/amd/dinar/buildOpts.c @@ -0,0 +1,483 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * AMD User options selection for a Sabine/Lynx platform solution system + * + * This file is placed in the user's platform directory and contains the + * build option selections desired for that platform. + * + * For Information about this file, see @ref platforminstall. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 6049 $ @e $Date: 2008-05-14 01:58:02 -0500 (Wed, 14 May 2008) $ + */ +#include "AGESA.h" +#include "CommonReturns.h" +#include "Filecode.h" +#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE + + +/* Select the cpu family. */ + + +/* Select the cpu socket type. */ +#define INSTALL_G34_SOCKET_SUPPORT TURE +#define INSTALL_C32_SOCKET_SUPPORT FALSE +#define INSTALL_S1G3_SOCKET_SUPPORT FALSE +#define INSTALL_S1G4_SOCKET_SUPPORT FALSE +#define INSTALL_ASB2_SOCKET_SUPPORT FALSE +#define INSTALL_FS1_SOCKET_SUPPORT FALSE +#define INSTALL_FM1_SOCKET_SUPPORT FALSE +#define INSTALL_FP1_SOCKET_SUPPORT FALSE +#define INSTALL_FT1_SOCKET_SUPPORT FALSE +#define INSTALL_AM3_SOCKET_SUPPORT FALSE + +/* + * Agesa optional capabilities selection. + * Uncomment and mark FALSE those features you wish to include in the build. + * Comment out or mark TRUE those features you want to REMOVE from the build. + */ + +/* User makes option selections here + * Comment out the items wanted to be included in the build. + * Uncomment those items you with to REMOVE from the build. + */ +//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE +//#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +//#define BLDOPT_REMOVE_ECC_SUPPORT TRUE +//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE +//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE +//#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE +#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE +//#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE +//#define BLDOPT_REMOVE_DDR3_SUPPORT TRUE +//#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE +//#define BLDOPT_REMOVE_ACPI_PSTATES TRUE +//#define BLDOPT_REMOVE_SRAT TRUE +//#define BLDOPT_REMOVE_SLIT TRUE +#define BLDOPT_REMOVE_WHEA TRUE +//#define BLDOPT_REMOVE_DMI TRUE +#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE +//#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE +/* Build configuration values here. +*/ +#define BLDCFG_VRM_CURRENT_LIMIT 120000 +#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 +#define BLDCFG_PLAT_NUM_IO_APICS 2 +#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST +#define BLDCFG_MEM_INIT_PSTATE 0 +#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 + +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_SERVER + +#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1600_FREQUENCY +#define BLDCFG_MEMORY_MODE_UNGANGED TRUE +#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE +#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_REGISTERED +#define BLDCFG_MEMORY_RDIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_SODIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE +#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING TRUE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE +#define BLDCFG_MEMORY_POWER_DOWN TRUE +#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT //FALSE +#define BLDCFG_ONLINE_SPARE TRUE +#define BLDCFG_MEMORY_PARITY_ENABLE TRUE +#define BLDCFG_BANK_SWIZZLE TRUE +#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO +#define BLDCFG_MEMORY_CLOCK_SELECT DDR800_FREQUENCY +#define BLDCFG_DQS_TRAINING_CONTROL TRUE +#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE +#define BLDCFG_USE_BURST_MODE FALSE +#define BLDCFG_MEMORY_ALL_CLOCKS_ON TRUE +#define BLDCFG_ENABLE_ECC_FEATURE TRUE +#define BLDCFG_ECC_REDIRECTION TRUE +#define BLDCFG_SCRUB_IC_RATE 0 +#define BLDCFG_ECC_SYNC_FLOOD TRUE +#define BLDCFG_ECC_SYMBOL_SIZE 0 +#define BLDCFG_1GB_ALIGN FALSE +#define BLDCFG_PLATFORM_C1E_MODE C1eModeMsgBased +#define BLDCFG_PLATFORM_C1E_OPDATA 0x2000 +//#define BLDCFG_USE_ATM_MODE TRUE + +#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 +#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0xCB0 +#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance //BatteryLife +//#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeMsgBasedC1e +//#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x2000 + +//#define IDSOPT_IDS_ENABLED TRUE +#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE +#define BLDOPT_REMOVE_LOW_PWR_PSTATE_FOR_PROCHOT TRUE +#define BLDCFG_PSTATE_HPC_MODE FALSE + +#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST &MaranelloOverrideDevCap +/* + * Agesa entry points used in this implementation. + */ +/* Process the options... + * This file include MUST occur AFTER the user option selection settings + */ +#define AGESA_ENTRY_INIT_RESET TRUE//FALSE +#define AGESA_ENTRY_INIT_RECOVERY FALSE +#define AGESA_ENTRY_INIT_EARLY TRUE +#define AGESA_ENTRY_INIT_POST TRUE +#define AGESA_ENTRY_INIT_ENV TRUE +#define AGESA_ENTRY_INIT_MID TRUE +#define AGESA_ENTRY_INIT_LATE TRUE +#define AGESA_ENTRY_INIT_S3SAVE TRUE +#define AGESA_ENTRY_INIT_RESUME TRUE +#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE +#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE +#define AGESA_ENTRY_LATE_RUN_AP_TASK TRUE + + +/***************************************************************************** + * Define the RELEASE VERSION string + * + * The Release Version string should identify the next planned release. + * When a branch is made in preparation for a release, the release manager + * should change/confirm that the branch version of this file contains the + * string matching the desired version for the release. The trunk version of + * the file should always contain a trailing 'X'. This will make sure that a + * development build from trunk will not be confused for a released version. + * The release manager will need to remove the trailing 'X' and update the + * version string as appropriate for the release. The trunk copy of this file + * should also be updated/incremented for the next expected version, + trailing 'X' + ****************************************************************************/ +// This is the delivery package title, "MarG34PI" +// This string MUST be exactly 8 characters long +#define AGESA_PACKAGE_STRING {'O', 'r', 'o', 'c', 'h', 'i', 'P', 'I'} + +// This is the release version number of the AGESA component +// This string MUST be exactly 12 characters long +#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '9', '.', '0', ' ', ' ', ' ', ' '} + +// The Maranello solution is defined to be families 0x10 and 0x15 models 0x0 - 0xF in the G34 socket. +#define INSTALL_G34_SOCKET_SUPPORT TRUE +#define INSTALL_FAMILY_10_SUPPORT TRUE +#define INSTALL_FAMILY_15_MODEL_0x_SUPPORT TRUE + +#ifdef BLDOPT_REMOVE_FAMILY_10_SUPPORT +#if BLDOPT_REMOVE_FAMILY_10_SUPPORT == TRUE +#undef INSTALL_FAMILY_10_SUPPORT +#define INSTALL_FAMILY_10_SUPPORT FALSE +#endif +#endif + +#ifdef BLDOPT_REMOVE_FAMILY_15_SUPPORT +#if BLDOPT_REMOVE_FAMILY_15_SUPPORT == TRUE +#undef INSTALL_FAMILY_15_MODEL_0x_SUPPORT +#define INSTALL_FAMILY_15_MODEL_0x_SUPPORT FALSE +#endif +#endif + +// The following definitions specify the default values for various parameters in which there are +// no clearly defined defaults to be used in the common file. The values below are based on product +// and BKDG content, please consult the AGESA Memory team for consultation. +#define DFLT_SCRUB_DRAM_RATE (0xFF) +#define DFLT_SCRUB_L2_RATE (0x10) +#define DFLT_SCRUB_L3_RATE (0x10) +#define DFLT_SCRUB_IC_RATE (0) +#define DFLT_SCRUB_DC_RATE (0x12) +#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_REGISTERED +#define DFLT_VRM_SLEW_RATE (2500) + +/* Process the options... + * This file include MUST occur + AFTER the user option selection settings + */ +CONST MANUAL_BUID_SWAP_LIST ROMDATA MaranelloManualBuidSwapList[2] = +{ + HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, + 0, 0, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF +}; + +#define BLDCFG_BUID_SWAP_LIST &MaranelloManualBuidSwapList + +// And another platform specific one ... +//CONST CPU_TO_CPU_PCB_LIMITS ROMDATA MaranelloCpuToCpuLimitList[2] = +//{ +// HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, +// HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_3200M, +// HT_LIST_TERMINAL +//}; + +CONST CPU_TO_CPU_PCB_LIMITS ROMDATA MaranelloCpuToCpuLimitList[] = +{ + HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, + HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_2600M, + HT_LIST_MATCH_ANY, HT_LIST_MATCH_INTERNAL_LINK, HT_LIST_MATCH_ANY, HT_LIST_MATCH_INTERNAL_LINK, + HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_2600M, + HT_LIST_TERMINAL +}; + +#define BLDCFG_HTFABRIC_LIMITS_LIST &MaranelloCpuToCpuLimitList + +// A performance-per-watt optimization. +CONST SKIP_REGANG ROMDATA PerfPerWatt[] = { + HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, POWERED_OFF, + HT_LIST_MATCH_ANY, HT_LIST_MATCH_INTERNAL_LINK, HT_LIST_MATCH_ANY, HT_LIST_MATCH_INTERNAL_LINK, POWERED_OFF, + HT_LIST_TERMINAL, +}; + +// uncomment the line below to make Perf-per-watt enabled by default. +#define BLDCFG_LINK_SKIP_REGANG_LIST &PerfPerWatt + + +CONST IO_PCB_LIMITS ROMDATA MaranelloIoLimitList[2] = +{ + HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_2600M, + HT_LIST_TERMINAL +}; + +#define BLDCFG_HTCHAIN_LIMITS_LIST &MaranelloIoLimitList + +CONST SYSTEM_PHYSICAL_SOCKET_MAP ROMDATA DinarPhysicalSocketMap[] = +{ + // Source Socket, Link (4-7 are sublink 1), Target Socket + {0, 0, 1}, + {0, 1, 1}, + {0, 3, 1}, + {0, 4, 1}, + {0, 5, 1}, + {0, 7, 1}, +}; + +#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP &DinarPhysicalSocketMap + +/* + * PCI Bus numbers for Drachma/Peso board + */ +CONST OVERRIDE_BUS_NUMBERS ROMDATA MaranelloOverrideBusNumbers[5] = +{ + // Socket, Link, SecBus, SubBus + 0, 2, 0x00, 0xBF, // RD890 of Dinar + 1, 0, 0xC0, 0xFF, // HTX + HT_LIST_TERMINAL +}; + +#define BLDCFG_BUS_NUMBERS_LIST &MaranelloOverrideBusNumbers + +CONST CPU_HT_DEEMPHASIS_LEVEL ROMDATA DinarDeemphasisList[] = +{ + { HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_200M, HT_FREQUENCY_1800M, DeemphasisLevelNone, DcvLevelNone}, + { HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2000M, HT_FREQUENCY_2600M, DeemphasisLevelMinus3, DcvLevelMinus3}, + { HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2800M, HT_FREQUENCY_MAX, DeemphasisLevelMinus6, DcvLevelMinus6}, + 0xFF +}; + +#define BLDCFG_PLATFORM_DEEMPHASIS_LIST DinarDeemphasisList +/* + CONST SKIP_REGANG ROMDATA DinarSkipRegangMap[] = + { +// {socketA, linkA, socketB, linkB} +{0, 0, 1, 1}, +}; + +#define BLDCFG_LINK_SKIP_REGANG_LIST &DinarSkipRegangMap +*/ + +/* + * Device Capabilities Override for disabling ID Clumping + */ +CONST DEVICE_CAP_OVERRIDE ROMDATA MaranelloOverrideDevCap[2] = +{ + HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, + 0, 0, HT_LIST_MATCH_ANY, {0, 0, 0, 0, 0, 1, 0}, 0, 0, 0, 0, {0}, + HT_LIST_TERMINAL +}; + +#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST &MaranelloOverrideDevCap + + +#include "cpuRegisters.h" +#include "cpuFamRegisters.h" +#include "cpuFamilyTranslation.h" +#include "AdvancedApi.h" +#include "heapManager.h" +#include "CreateStruct.h" +#include "cpuFeatures.h" +#include "Table.h" +#include "CommonReturns.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "GnbInterfaceStub.h" +#include "PlatformInstall.h" + +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + // + // The following macros are supported (use comma to separate macros): + // + // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) + // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. + // AGESA will base on this value to disable unused MemClk to save power. + // Example: + // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: + // Bit AM3/S1g3 pin name + // 0 M[B,A]_CLK_H/L[0] + // 1 M[B,A]_CLK_H/L[1] + // 2 M[B,A]_CLK_H/L[2] + // 3 M[B,A]_CLK_H/L[3] + // 4 M[B,A]_CLK_H/L[4] + // 5 M[B,A]_CLK_H/L[5] + // 6 M[B,A]_CLK_H/L[6] + // 7 M[B,A]_CLK_H/L[7] + // And platform has the following routing: + // CS0 M[B,A]_CLK_H/L[4] + // CS1 M[B,A]_CLK_H/L[2] + // CS2 M[B,A]_CLK_H/L[3] + // CS3 M[B,A]_CLK_H/L[5] + // Then platform can specify the following macro: + // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) + // + // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) + // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. + // AGESA will base on this value to tristate unused CKE to save power. + // + // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) + // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. + // AGESA will base on this value to tristate unused ODT pins to save power. + // + // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) + // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. + // AGESA will base on this value to tristate unused Chip select to save power. + // + // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) + // Specifies the number of DIMM slots per channel. + // + // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) + // Specifies the number of channels per socket. + // + + // Dinar has the following routing: + // CS0 M[B,A]_CLK_H/L[0] + // CS1 M[B,A]_CLK_H/L[2] + // CS2 M[B,A]_CLK_H/L[1] + // CS3 M[B,A]_CLK_H/L[3] + MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x01, 0x04, 0x02, 0x08, 0x00, 0x00), + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + PSO_END +}; + +/* + * These tables are optional and may be used to adjust memory timing settings + */ +#include "mm.h" +#include "mn.h" + +//HY Customer table +UINT8 AGESA_MEM_TABLE_HY[][sizeof(MEM_TABLE_ALIAS)] = +{ + // Hardcoded Memory Training Values + + // The following macro should be used to override training values for your platform + // + // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), + // + // NOTE: + // The following training hardcode values are example values that were taken from a tilapia motherboard + // with a particular DIMM configuration. To harcode your own values, uncomment the appropriate line in + // the table and replace the byte lane values with your own. + // + // ------------------ BYTE LANES ---------------------- + // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC + // Write Data Timing + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 + + // DQS Receiver Enable + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 + + // Write DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 + + // Read DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 + //-------------------------------------------------------------------------------------------------------------------------------------------------- + // TABLE END + NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table +}; +UINT8 SizeOfTableHy = sizeof (AGESA_MEM_TABLE_HY) / sizeof (AGESA_MEM_TABLE_HY[0]); +/* *************************************************************************** + * Optional User code to be included into the AGESA build + * These may be 32-bit call-out routines... + */ +//AGESA_STATUS +//AgesaReadSpd ( +// IN UINTN FcnData, +// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd +// ) +//{ +// /* platform code to read an SPD... */ +// return Status; +//} + +/* *************************************************************************** + * Optional User code to be included into the AGESA build + * These may be 32-bit call-out routines... + */ +//AGESA_STATUS +//AgesaReadSpd ( +// IN UINTN FcnData, +// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd +// ) +//{ +// /* platform code to read an SPD... */ +// return Status; +//} + + diff --git a/src/mainboard/amd/dinar/chip.h b/src/mainboard/amd/dinar/chip.h new file mode 100644 index 0000000..42630fa --- /dev/null +++ b/src/mainboard/amd/dinar/chip.h @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +extern struct chip_operations mainboard_ops; + +struct mainboard_config {}; diff --git a/src/mainboard/amd/dinar/cmos.layout b/src/mainboard/amd/dinar/cmos.layout new file mode 100644 index 0000000..f54529a --- /dev/null +++ b/src/mainboard/amd/dinar/cmos.layout @@ -0,0 +1,118 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#***************************************************************************** + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + + diff --git a/src/mainboard/amd/dinar/devicetree.cb b/src/mainboard/amd/dinar/devicetree.cb new file mode 100644 index 0000000..92fe521 --- /dev/null +++ b/src/mainboard/amd/dinar/devicetree.cb @@ -0,0 +1,104 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +chip northbridge/amd/agesa/family15/root_complex + device lapic_cluster 0 on + chip cpu/amd/agesa/family15 + device lapic 0x20 on end + end + end + device pci_domain 0 on + subsystemid 0x1022 0x1705 inherit + chip northbridge/amd/agesa/family15 # CPU side of HT root complex + device pci 18.0 on end # Link 0 + device pci 18.0 on # Link 1, IO-HUB on socket0 link 2(internal Node0 Link 1) + chip northbridge/amd/cimx/rd890 # North Bridge PCI side of HT Root complex + device pci 0.0 on end # HT Root Complex + device pci 0.1 off end # CLKCONFIG + device pci 2.0 on end # GPP1 Port0 + device pci 3.0 off end # GPP1 Port1 + device pci 4.0 off end # GPP3a Port0 + device pci 5.0 off end # GPP3a Port1 + device pci 6.0 off end # GPP3a Port2 + device pci 7.0 off end # GPP3a Port3 + device pci 8.0 off end # NB/SB Link P2P bridge, should be hidden at boot time + device pci 9.0 off end # GPP3a Port4 + device pci a.0 off end # GPP3a Port5 + device pci b.0 off end # GPP2 Port0 (Not for sr5650) + device pci c.0 off end # GPP2 Port1 (Not for sr5650/sr5670) + device pci d.0 on end # GPP3b Port0 (Not for sr5650/sr5670) 0x5A1E, Intel 82576 + register "gpp1_configuration" = "0" # Configuration 16:0 default + register "gpp2_configuration" = "1" # Configuration 8:8 + register "gpp3a_configuration" = "2" # 2 Configuration 4:1:1:0:0:0, 11 Configuration 1:1:1:1:1:1 + register "port_enable" = "0x2104" + end # northbridge/amd/cimx/rd890 + chip southbridge/amd/cimx/sb700 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB1 + device pci 12.1 on end # USB1 + device pci 12.2 on end # USB1 + device pci 13.0 on end # USB2 + device pci 13.1 on end # USB2 + device pci 13.2 on end # USB2 + device pci 14.0 on # SM + end # SM + device pci 14.1 off end # IDE 0x439c + device pci 14.2 off end # HDA 0x4383 + device pci 14.3 on # LPC + chip superio/smsc/sch4037 # SIO SMSC SCH4037 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + irq 0x74 = 2 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + irq 0x74 = 4 + end + device pnp 2e.4 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + end #SIO SMSC307 + end #LPC + device pci 14.4 on end # PCI bridge, 0x4384 + device pci 14.5 on end # USB 3 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/cimx/sb700 + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + end #chip northbridge/amd/agesa/family15 # CPU side of HT root complex + end #pci_domain +end #northbridge/amd/agesa/family15/root_complex + diff --git a/src/mainboard/amd/dinar/dimmSpd.c b/src/mainboard/amd/dinar/dimmSpd.c new file mode 100644 index 0000000..f26ec20 --- /dev/null +++ b/src/mainboard/amd/dinar/dimmSpd.c @@ -0,0 +1,333 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ + +#include "Porting.h" +#include "AGESA.h" +#include "amdlib.h" + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ +#define SMBUS_BASE_ADDR 0xB00 +#define DIMENSION(array)(sizeof (array)/ sizeof (array [0])) + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ +#define LTC4305_SMBUS_ADDR 0x94 + +typedef struct _DIMM_INFO_SMBUS{ + UINT8 SocketId; + UINT8 MemChannelId; + UINT8 DimmId; + UINT8 SmbusAddress; +} DIMM_INFO_SMBUS; +/* + * SPD address table - porting required + */ +STATIC CONST DIMM_INFO_SMBUS SpdAddrLookup [] = +{ + /* Socket, Channel, Dimm, Smbus */ + {0, 0, 0, 0xAC}, + {0, 0, 1, 0xAE}, + {0, 1, 0, 0xA8}, + {0, 1, 1, 0xAA}, + {0, 2, 0, 0xA4}, + {0, 2, 1, 0xA6}, + {0, 3, 0, 0xA0}, + {0, 3, 1, 0xA2}, + {1, 0, 0, 0xAC}, + {1, 0, 1, 0xAE}, + {1, 1, 0, 0xA8}, + {1, 1, 1, 0xAA}, + {1, 2, 0, 0xA4}, + {1, 2, 1, 0xA6}, + {1, 3, 0, 0xA0}, + {1, 3, 1, 0xA2} +}; + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +AGESA_STATUS +AmdMemoryReadSPD ( + IN UINT32 Func, + IN UINT32 Data, + IN OUT AGESA_READ_SPD_PARAMS *SpdData + ); + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + + +/*--------------------------------------------------------------------------------------- + * L O C A L F U N C T I O N S + *--------------------------------------------------------------------------------------- + */ + +STATIC +VOID +WritePmReg ( + IN UINT8 Reg, + IN UINT8 Data + ) +{ + __outbyte (0xCD6, Reg); + __outbyte (0xCD7, Data); +} +STATIC +VOID +SetupFch ( + IN UINT16 + IN IoBase + ) +{ + + AMD_CONFIG_PARAMS StdHeader; + UINT32 PciData32; + UINT8 PciData8; + PCI_ADDR PciAddress; + + /* Set SMBUS MMIO. */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 20, 0, 0x90); + PciData32 = (SMBUS_BASE_ADDR & 0xFFFFFFF0) | BIT0; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData32, &StdHeader); + + /* Enable SMBUS MMIO. */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 20, 0, 0xD2); + LibAmdPciRead(AccessWidth8, PciAddress, &PciData8, &StdHeader); ; + PciData8 |= BIT0; + LibAmdPciWrite(AccessWidth8, PciAddress, &PciData8, &StdHeader); + /* set SMBus clock to 400 KHz */ + __outbyte (IoBase + 0x0E, 66000000 / 400000 / 4); +} + +/* + * + * ReadSmbusByteData - read a single SPD byte from any offset + * + */ + +STATIC +AGESA_STATUS +ReadSmbusByteData ( + IN UINT16 Iobase, + IN UINT8 Address, + OUT UINT8 *ByteData, + IN UINTN Offset + ) +{ + UINTN Status; + UINT64 Limit; + + Address |= 1; // set read bit + + __outbyte (Iobase + 0, 0xFF); // clear error status + __outbyte (Iobase + 1, 0x1F); // clear error status + __outbyte (Iobase + 3, Offset); // offset in eeprom + __outbyte (Iobase + 4, Address); // slave address and read bit + __outbyte (Iobase + 2, 0x48); // read byte command + + /* time limit to avoid hanging for unexpected error status (should never happen) */ + Limit = __rdtsc () + 2000000000 / 10; + for (;;) { + Status = __inbyte (Iobase); + if (__rdtsc () > Limit) break; + if ((Status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting + if ((Status & 1) == 1) continue; // HostBusy set, keep waiting + break; + } + + *ByteData = __inbyte (Iobase + 5); + if (Status == 2) Status = 0; // check for done with no errors + return Status; +} +/* + * + * WriteSmbusByteData - Write a single SPD byte onto any offset + * + */ +STATIC +AGESA_STATUS +WriteSmbusByteData ( + IN UINT16 Iobase, + IN UINT8 Address, + IN UINT8 ByteData, + IN UINTN Offset + ) +{ + UINTN Status; + UINT64 Limit; + Address &= 0xFE; // set write bit + + __outbyte (Iobase + 0, 0xFF); // clear error status + __outbyte (Iobase + 1, 0x1F); // clear error status + __outbyte (Iobase + 3, Offset); // offset in eeprom + __outbyte (Iobase + 4, Address); // slave address and write bit + __outbyte (Iobase + 5, ByteData); // offset in byte data // + __outbyte (Iobase + 2, 0x48); // write byte command + /* time limit to avoid hanging for unexpected error status (should never happen) */ + Limit = __rdtsc () + 2000000000 / 10; + for (;;) { + Status = __inbyte (Iobase); + if (__rdtsc () > Limit) break; + if ((Status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting + if ((Status & 1) == 1) continue; // HostBusy set, keep waiting + break; + } + if (Status == 2) Status = 0; // check for done with no errors + return Status; +} + +/* + * + * ReadSmbusByte - read a single SPD byte from the default offset + * this function is faster function readSmbusByteData + * + */ + +STATIC +AGESA_STATUS +ReadSmbusByte ( + IN UINT16 Iobase, + IN UINT8 Address, + OUT UINT8 *Buffer + ) +{ + UINTN Status; + UINT64 Limit; + + __outbyte (Iobase + 0, 0xFF); // clear error status + __outbyte (Iobase + 1, 0x1F); // clear error status + __outbyte (Iobase + 2, 0x44); // read command + + // time limit to avoid hanging for unexpected error status + Limit = __rdtsc () + 2000000000 / 10; + for (;;) { + Status = __inbyte (Iobase); + if (__rdtsc () > Limit) break; + if ((Status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting + if ((Status & 1) == 1) continue; // HostBusy set, keep waiting + break; + } + + Buffer [0] = __inbyte (Iobase + 5); + if (Status == 2) Status = 0; // check for done with no errors + return Status; +} + +/* + * + * ReadSpd - Read one or more SPD bytes from a DIMM. + * Start with offset zero and read sequentially. + * Optimization relies on autoincrement to avoid + * sending offset for every byte. + * Reads 128 bytes in 7-8 ms at 400 KHz. + * + */ + +STATIC +AGESA_STATUS +ReadSpd ( + IN UINT16 IoBase, + IN UINT8 SmbusSlaveAddress, + OUT UINT8 *Buffer, + IN UINTN Count + ) +{ + UINTN Index, Status; + + /* read the first byte using offset zero */ + Status = ReadSmbusByteData (IoBase, SmbusSlaveAddress, Buffer, 0); + if (Status) return Status; + + /* read the remaining bytes using auto-increment for speed */ + for (Index = 1; Index < Count; Index++){ + Status = ReadSmbusByte (IoBase, SmbusSlaveAddress, &Buffer [Index]); + if (Status) return Status; + } + return 0; +} + +AGESA_STATUS +AmdMemoryReadSPD ( + IN UINT32 Func, + IN UINT32 Data, + IN OUT AGESA_READ_SPD_PARAMS *SpdData + ) +{ + AGESA_STATUS Status; + UINT8 SmBusAddress = 0; + UINTN Index; + UINTN MaxSocket = DIMENSION (SpdAddrLookup); + + for (Index = 0; Index < MaxSocket; Index ++){ + if ((SpdData->SocketId == SpdAddrLookup[Index].SocketId) && + (SpdData->MemChannelId == SpdAddrLookup[Index].MemChannelId) && + (SpdData->DimmId == SpdAddrLookup[Index].DimmId)) { + SmBusAddress = SpdAddrLookup[Index].SmbusAddress; + break; + } + } + + + if (SmBusAddress == 0) return AGESA_ERROR; + + SetupFch (SMBUS_BASE_ADDR); + + Status = WriteSmbusByteData (SMBUS_BASE_ADDR, LTC4305_SMBUS_ADDR, 0x80, 0x03); + + switch (SpdData->SocketId) { + case 0: + /* Switch onto the First CPU Socket SMBUS */ + WriteSmbusByteData (SMBUS_BASE_ADDR, LTC4305_SMBUS_ADDR, 0x80, 0x03); + break; + case 1: + /* Switch onto the Second CPU Socket SMBUS */ + WriteSmbusByteData (SMBUS_BASE_ADDR, LTC4305_SMBUS_ADDR, 0x40, 0x03); + break; + default: + /* Switch off two CPU Sockets SMBUS */ + WriteSmbusByteData (SMBUS_BASE_ADDR, LTC4305_SMBUS_ADDR, 0x00, 0x03); + break; + } + Status = ReadSpd (SMBUS_BASE_ADDR, SmBusAddress, SpdData->Buffer, 256); + + /*Output SPD Debug Message*/ + printk(BIOS_EMERG, "file '%s',line %d, %s()\n", __FILE__, __LINE__, __func__); + printk(BIOS_DEBUG, " Status = %d\n",Status); + printk(BIOS_DEBUG, "SocketId MemChannelId SpdData->DimmId SmBusAddress Buffer\n"); + printk(BIOS_DEBUG, "%x, %x, %x, %x, %x\n", SpdData->SocketId, SpdData->MemChannelId, SpdData->DimmId, SmBusAddress, SpdData->Buffer); + + /* Switch off two CPU Sockets SMBUS */ + WriteSmbusByteData (SMBUS_BASE_ADDR, LTC4305_SMBUS_ADDR, 0x00, 0x03); + return Status; +} diff --git a/src/mainboard/amd/dinar/dsdt.asl b/src/mainboard/amd/dinar/dsdt.asl new file mode 100644 index 0000000..1cbb05e --- /dev/null +++ b/src/mainboard/amd/dinar/dsdt.asl @@ -0,0 +1,1148 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "AMD ", /* OEMID */ + "DINAR ", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include "../../../arch/x86/acpi/debug.asl" */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* Some global data */ + Name(OSV, Ones) /* Assume nothing */ + Name(GPIC, 0x1) /* Assume PIC */ + + /* + * Processor Object + * + */ + Scope (_PR) { /* define processor scope */ + Processor( + CPU0, /* name space name */ + 0, /* Unique number for this processor */ + 0x810, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + Processor( + CPU1, /* name space name */ + 1, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + Processor( + CPU2, /* name space name */ + 2, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + Processor( + CPU3, /* name space name */ + 3, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + } /* End _PR scope */ + + /* PIC IRQ mapping registers, C00h-C01h. */ + OperationRegion(PIRQ, SystemIO, 0x00000C00, 0x00000002) + Field(PIRQ, ByteAcc, NoLock, Preserve) { + PIDX, 0x00000008, + PDAT, 0x00000008, /* Offset: 1h */ + } + IndexField(PIDX, PDAT, ByteAcc, NoLock, Preserve) { + PIRA, 0x00000008, /* Index 0 */ + PIRB, 0x00000008, /* Index 1 */ + PIRC, 0x00000008, /* Index 2 */ + PIRD, 0x00000008, /* Index 3 */ + PIRE, 0x00000008, /* Index 4 */ + PIRF, 0x00000008, /* Index 5 */ + PIRG, 0x00000008, /* Index 6 */ + PIRH, 0x00000008, /* Index 7 */ + Offset(0x10), + PIRS, 0x00000008, + Offset(0x13), + HDAD, 0x00000008, + , 0x00000008, + GEC, 0x00000008, + Offset(0x30), + USB1, 0x00000008, + USB2, 0x00000008, + USB3, 0x00000008, + USB4, 0x00000008, + USB5, 0x00000008, + USB6, 0x00000008, + USB7, 0x00000008, + Offset(0x40), + IDE, 0x00000008, + SATA, 0x00000008, + Offset(0x50), + GPP0, 0x00000008, + GPP1, 0x00000008, + GPP2, 0x00000008, + GPP3, 0x00000008 + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers, TODO:PMIO is quite different in SB700. */ + OperationRegion(PMRG, SystemIO, 0x00000CD6, 0x00000002) + Field(PMRG, ByteAcc, NoLock, Preserve) { + PMRI, 0x00000008, + PMRD, 0x00000008, + } + IndexField (PMRI, PMRD, ByteAcc, NoLock, Preserve) { + Offset(0x24), + MMSO,32, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x50), + HPAD,32, + Offset(0x60), + P1EB,16, + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xC8), + ,2, + SPRE,1, + TPDE,1, + Offset(0xF0), + ,3, + RSTU,1 + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1E0, SystemIO, P1EB, 0x04) + Field(P1E0, ByteAcc, NoLock, Preserve) { + ,14, + PEWS,1, + WSTA,1, + ,14, + PEWD,1 + } + + OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100) + Field (GRAM, ByteAcc, Lock, Preserve) + { + Offset (0x10), + FLG0, 8 + } + + Scope(_SB) { + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve){ + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + + #include "acpi/routing.asl" + + Scope(_SB) { + + /* Debug Port registers, 80h. */ + OperationRegion(DBBG, SystemIO, 0x00000080, 0x00000001) + Field(DBBG, ByteAcc, NoLock, Preserve) { + DBG8, 0x00000008, + } + + Method(_PIC, 1) { + Store(Arg0, GPIC) + If (GPIC) { + Store(0xAA, _SB.DBG8) + _SB.DSPI() + } else { + Store(0xAC, _SB.DBG8) + } + } + + Method(DSPI, 0) { + _SB.GRUA(0x1F) + _SB.GRUB(0x1F) + _SB.GRUC(0x1F) + _SB.GRUD(0x1F) + Store(0x1F, PIRE) + Store(0x1F, PIRF) + Store(0x1F, PIRG) + Store(0x1F, PIRH) + } + + Method(GRUA, 1) { + Store(Arg0, PIRA) + Store(Arg0, HDAD) + Store(Arg0, GEC) + Store(Arg0, GPP0) + Store(Arg0, GPP0) + } + + Method(GRUB, 1) { + Store(Arg0, PIRB) + Store(Arg0, USB2) + Store(Arg0, USB4) + Store(Arg0, USB6) + Store(Arg0, GPP1) + Store(Arg0, IDE) + } + + Method(GRUC, 1) { + Store(Arg0, PIRC) + Store(Arg0, USB1) + Store(Arg0, USB3) + Store(Arg0, USB5) + Store(Arg0, USB7) + Store(Arg0, GPP2) + } + + Method(GRUD, 1) { + Store(Arg0, PIRD) + Store(Arg0, SATA) + Store(Arg0, GPP3) + } + + Name(IRQB, ResourceTemplate() { + IRQ(Level, ActiveLow, Shared) { + 15 + }}) + + Name(IRQP, ResourceTemplate() { + IRQ(Level, ActiveLow, Shared) { + 3, 4, 5, 7, 10, 11, 12, 14, 15 + }}) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + Method(_STA, 0) { + if (PIRA) { + Return(0x0B) + } else { + Return(0x09) + } + } + Method(_DIS ,0) { + _SB.GRUA(0x1F) + } + Method(_PRS ,0) { + Return(IRQP) + } + Method(_CRS ,0) { + CreateWordField(IRQB, 1, IRQN) + ShiftLeft(1, PIRA, IRQN) + Return(IRQB) + } + Method(_SRS, 1) { + CreateWordField(Arg0, 1, IRQM) + FindSetRightBit(IRQM, Local0) + Decrement(Local0) + _SB.GRUA(Local0) + } + } + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + Method(_STA, 0) { + if (PIRB) { + Return(0x0B) + } else { + Return(0x09) + } + } + Method(_DIS ,0) { + _SB.GRUB(0x1F) + } + Method(_PRS ,0) { + Return(IRQP) + } + Method(_CRS ,0) { + CreateWordField(IRQB, 1, IRQN) + ShiftLeft(1, PIRB, IRQN) + Return(IRQB) + } + Method(_SRS, 1) { + CreateWordField(Arg0, 1, IRQM) + FindSetRightBit(IRQM, Local0) + Decrement(Local0) + _SB.GRUB(Local0) + } + } + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + Method(_STA, 0) { + if (PIRC) { + Return(0x0B) + } else { + Return(0x09) + } + } + Method(_DIS ,0) { + _SB.GRUC(0x1F) + } + Method(_PRS ,0) { + Return(IRQP) + } + Method(_CRS ,0) { + CreateWordField(IRQB, 1, IRQN) + ShiftLeft(1, PIRC, IRQN) + Return(IRQB) + } + Method(_SRS, 1) { + CreateWordField(Arg0, 1, IRQM) + FindSetRightBit(IRQM, Local0) + Decrement(Local0) + _SB.GRUC(Local0) + } + } + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + Method(_STA, 0) { + if (PIRD) { + Return(0x0B) + } else { + Return(0x09) + } + } + Method(_DIS ,0) { + _SB.GRUD(0x1F) + } + Method(_PRS ,0) { + Return(IRQP) + } + Method(_CRS ,0) { + CreateWordField(IRQB, 1, IRQN) + ShiftLeft(1, PIRD, IRQN) + Return(IRQB) + } + Method(_SRS, 1) { + CreateWordField(Arg0, 1, IRQM) + FindSetRightBit(IRQM, Local0) + Decrement(Local0) + _SB.GRUD(Local0) + } + } + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + Method(_STA, 0) { + if (PIRE) { + Return(0x0B) + } else { + Return(0x09) + } + } + Method(_DIS ,0) { + Store(0x1F, PIRE) + } + Method(_PRS ,0) { + Return(IRQP) + } + Method(_CRS ,0) { + CreateWordField(IRQB, 1, IRQN) + ShiftLeft(1, PIRE, IRQN) + Return(IRQB) + } + Method(_SRS, 1) { + CreateWordField(Arg0, 1, IRQM) + FindSetRightBit(IRQM, Local0) + Decrement(Local0) + Store(Local0, PIRE) + } + } + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + Method(_STA, 0) { + if (PIRF) { + Return(0x0B) + } else { + Return(0x09) + } + } + Method(_DIS ,0) { + Store(0x1F, PIRF) + } + Method(_PRS ,0) { + Return(IRQP) + } + Method(_CRS ,0) { + CreateWordField(IRQB, 1, IRQN) + ShiftLeft(1, PIRF, IRQN) + Return(IRQB) + } + Method(_SRS, 1) { + CreateWordField(Arg0, 1, IRQM) + FindSetRightBit(IRQM, Local0) + Decrement(Local0) + Store(Local0, PIRF) + } + } + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + Method(_STA, 0) { + if (PIRG) { + Return(0x0B) + } else { + Return(0x09) + } + } + Method(_DIS ,0) { + Store(0x1F, PIRG) + } + Method(_PRS ,0) { + Return(IRQP) + } + Method(_CRS ,0) { + CreateWordField(IRQB, 1, IRQN) + ShiftLeft(1, PIRG, IRQN) + Return(IRQB) + } + Method(_SRS, 1) { + CreateWordField(Arg0, 1, IRQM) + FindSetRightBit(IRQM, Local0) + Decrement(Local0) + Store(Local0, PIRG) + } + } + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + Method(_STA, 0) { + if (PIRH) { + Return(0x0B) + } else { + Return(0x09) + } + } + Method(_DIS ,0) { + Store(0x1F, PIRH) + } + Method(_PRS ,0) { + Return(IRQP) + } + Method(_CRS ,0) { + CreateWordField(IRQB, 1, IRQN) + ShiftLeft(1, PIRH, IRQN) + Return(IRQB) + } + Method(_SRS, 1) { + CreateWordField(Arg0, 1, IRQM) + FindSetRightBit(IRQM, Local0) + Decrement(Local0) + Store(Local0, PIRH) + } + } + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PEWS, PEWS) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + } /* End Scope GPE */ + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include "../../../arch/x86/acpi/globutil.asl" /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) + External (TOM3) + External (TOM4) + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + Method(_PRT,0) { + If(GPIC){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Method(_STA,0) { + Return(0x0F) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Method(_PRT,0) { + If(GPIC){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* The external GFX bridge */ + Device(PBR3) { + Name(_ADR, 0x00030000) + Method(_PRT,0) { + If(GPIC){ Return(APS3) } /* APIC mode */ + Return (PS3) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR3 */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Method(_PRT,0) { + If(GPIC){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Method(_PRT,0) { + If(GPIC){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Method(_PRT,0) { + If(GPIC){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Method(_PRT,0) { + If(GPIC){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + Device(PE20) { + Name(_ADR, 0x00150000) + Method(_PRT,0) { + If(GPIC){ Return(APE0) } /* APIC mode */ + Return (PE0) /* PIC Mode */ + } /* end _PRT */ + } /* end PE20 */ + Device(PE21) { + Name(_ADR, 0x00150001) + Method(_PRT,0) { + If(GPIC){ Return(APE1) } /* APIC mode */ + Return (PE1) /* PIC Mode */ + } /* end _PRT */ + } /* end PE21 */ + Device(PE22) { + Name(_ADR, 0x00150002) + Method(_PRT,0) { + If(GPIC){ Return(APE2) } /* APIC mode */ + Return (APE2) /* PIC Mode */ + } /* end _PRT */ + } /* end PE22 */ + Device(PE23) { + Name(_ADR, 0x00150003) + Method(_PRT,0) { + If(GPIC){ Return(APE3) } /* APIC mode */ + Return (PE3) /* PIC Mode */ + } /* end _PRT */ + } /* end PE23 */ + + /* Describe the Southbridge devices */ + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + } + } /* end AZHD */ + + Device(GEC) { + Name(_ADR, 0x00140006) + } /* end GEC */ + + Device(UOH1) { + Name(_ADR, 0x00120000) + } /* end UOH1 */ + + Device(UOH3) { + Name(_ADR, 0x00130000) + } /* end UOH3 */ + + Device(UOH5) { + Name(_ADR, 0x00160000) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00140005) + } /* end UEH1 */ + + Device(UOH2) { + Name(_ADR, 0x00120002) + } /* end UOH2 */ + + Device(UOH4) { + Name(_ADR, 0x00130002) + } /* end UOH4 */ + + Device(UOH6) { + Name(_ADR, 0x00160002) + } /* end UOH5 */ + + Device(XHC0) { + Name(_ADR, 0x00100000) + } /* end XHC0 */ + + Device(XHC1) { + Name(_ADR, 0x00100001) + } /* end XHC1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ + Name(BUF0, ResourceTemplate() { + IO(Decode16, 0x0070, 0x0070, 0x01, 0x02) + }) + Name(BUF1, ResourceTemplate() { + IRQNoFlags() {8} + IO(Decode16, 0x0070, 0x0070, 0x01, 0x02) + }) + Method(_CRS, 0) { + If(LAnd(HPAD, 0xFFFFFF00)) { + Return(BUF0) + } + Return(BUF1) + } + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(BUF0, ResourceTemplate() { + IO(Decode16, 0x0040, 0x0040, 0x01, 0x04) + }) + Name(BUF1, ResourceTemplate() { + IRQNoFlags() {0} + IO(Decode16, 0x0040, 0x0040, 0x01, 0x04) + }) + Method(_CRS, 0) { + If(LAnd(HPAD, 0xFFFFFF00)) { + Return(BUF0) + } + Return(BUF1) + } + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + + Device (PS2M) { + Name (_HID, EisaId ("PNP0F13")) + Name (_CRS, ResourceTemplate () { + IRQNoFlags () {12} + }) + Method (_STA, 0) { + And (FLG0, 0x04, Local0) + If (LEqual (Local0, 0x04)) { + Return (0x0F) + } Else { + Return (0x00) + } + } + } + + Device (PS2K) { + Name (_HID, EisaId ("PNP0303")) + Name (_CRS, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {1} + }) + } + } /* end LIBR */ + + Device(STCR) { + Name(_ADR, 0x00110000) + #include "acpi/sata.asl" + } /* end STCR */ + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + Device(HPET) { + Name(_HID,EISAID("PNP0103")) + Name(CRS, ResourceTemplate() { + IRQNoFlags() {0} + IRQNoFlags() {8} + Memory32Fixed(ReadOnly, 0xFED00000, 0x00000400) + }) + Method(_STA, 0) { + If(LAnd(HPAD, 0xFFFFFF00)) { + Return(0x0F) + } + Return(0x0) + } + Method(_CRS, 0) { + CreateDWordField(CRS, 0x0A, HPEB) + Store(HPAD, Local0) + And(Local0, 0xFFFFFFC0, HPEB) + Return(CRS) + } + } /* End Device(_SB.PCI0.HPET) */ + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + /* memory space for PCI BARs below 4GB */ + Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ + CreateDWordField(CRES, ^MMIO._BAS, MM1B) + CreateDWordField(CRES, ^MMIO._LEN, MM1L) + + Store(_SB.PCI0.TOM1, MM1B) + Subtract(PCBA, MM1B, MM1L) + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ +} +/* End of ASL file */ diff --git a/src/mainboard/amd/dinar/fadt.c b/src/mainboard/amd/dinar/fadt.c new file mode 100644 index 0000000..baf0328 --- /dev/null +++ b/src/mainboard/amd/dinar/fadt.c @@ -0,0 +1,173 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +/* + * ACPI - create the Fixed ACPI Description Tables (FADT) + */ + + +#include <string.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <device/device.h> +#include "Platform.h" /*sb700 platform header*/ + +#ifndef ACPI_BLK_BASE +#define ACPI_BLK_BASE PM1_EVT_BLK_ADDRESS +#endif +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + + printk(BIOS_DEBUG, "ACPI_BLK_BASE: 0x%04x\n", ACPI_BLK_BASE); + /* Prepare the header */ + memset((void *)fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = 244; + header->revision = 1; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 0; + + fadt->firmware_ctrl = (u32) facs; + fadt->dsdt = (u32) dsdt; + /* 3=Workstation,4=Enterprise Server, 7=Performance Server */ + fadt->preferred_pm_profile = 0x03; + fadt->sci_int = 9; + /* disable system management mode by setting to 0: */ + fadt->smi_cmd = 0; + fadt->acpi_enable = 0xf0; + fadt->acpi_disable = 0xf1; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0xe2; + + /* RTC_En_En, TMR_En_En, GBL_EN_EN */ + outl(0x1, PM1_CNT_BLK_ADDRESS); /* set SCI_EN */ + fadt->pm1a_evt_blk = PM1_EVT_BLK_ADDRESS; + fadt->pm1b_evt_blk = 0x0000; + fadt->pm1a_cnt_blk = PM1_CNT_BLK_ADDRESS; + fadt->pm1b_cnt_blk = 0x0000; + fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK_ADDRESS; + fadt->pm_tmr_blk = PM1_TMR_BLK_ADDRESS; + fadt->gpe0_blk = GPE0_BLK_ADDRESS; + fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 8; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + + fadt->cst_cnt = 0xe3; + fadt->p_lvl2_lat = 101; + fadt->p_lvl3_lat = 1001; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0; /* 0x7d these have to be */ + fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ + fadt->century = 0; /* 0x7f to make rtc alrm work */ + fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ + fadt->flags = 0x0001c1a5;/* 0x25; */ + + fadt->res2 = 0; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (u32) facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (u32) dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = PM1_EVT_BLK_ADDRESS; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 4; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = PM1_CNT_BLK_ADDRESS; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 2; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK_ADDRESS; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = PM1_TMR_BLK_ADDRESS; + fadt->x_pm_tmr_blk.addrh = 0x0; + + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 32; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = GPE0_BLK_ADDRESS; + fadt->x_gpe0_blk.addrh = 0x0; + + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); + +} diff --git a/src/mainboard/amd/dinar/get_bus_conf.c b/src/mainboard/amd/dinar/get_bus_conf.c new file mode 100644 index 0000000..f66e92c --- /dev/null +++ b/src/mainboard/amd/dinar/get_bus_conf.c @@ -0,0 +1,156 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#include <cpu/amd/amdfam15.h> +#include "agesawrapper.h" +#if CONFIG_AMD_SB_CIMX +#include <sb_cimx.h> +#endif + + +/* Global variables for MB layouts and these will be shared by irqtable mptable + * and acpi_tables busnum is default. + */ +u8 bus_isa; +u8 bus_sb700[2]; +u8 bus_rd890[14]; + +/* + * Here you only need to set value in pci1234 for HT-IO that could be installed or not + * You may need to preset pci1234 for HTIO board, + * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + */ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* + * HT Chain device num, actually it is unit id base of every ht device in chain, + * assume every chain only have 4 ht device at most + */ +u32 hcdnx[] = { + 0x20202020, +}; + +u32 bus_type[256]; + +u32 sbdn_sb700; +u32 sbdn_rd890; + +static u32 get_bus_conf_done = 0; + + + + +void get_bus_conf(void) +{ + u32 status; + + device_t dev; + int i, j; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + + get_bus_conf_done = 1; + + printk(BIOS_DEBUG, "Mainboard - Get_bus_conf.c - get_bus_conf - Start.\n"); + /* + * This is the call to AmdInitLate. It is really in the wrong place, conceptually, + * but functionally within the coreboot model, this is the best place to make the + * call. The logically correct place to call AmdInitLate is after PCI scan is done, + * after the decision about S3 resume is made, and before the system tables are + * written into RAM. The routine that is responsible for writing the tables is + * "write_tables", called near the end of "hardwaremain". There is no platform + * specific entry point between the S3 resume decision point and the call to + * "write_tables", and the next platform specific entry points are the calls to + * the ACPI table write functions. The first of ose would seem to be the right + * place, but other table write functions, e.g. the PIRQ table write function, are + * called before the ACPI tables are written. This routine is called at the beginning + * of each of the write functions called prior to the ACPI write functions, so this + * becomes the best place for this call. + */ + status = agesawrapper_amdinitlate(); + if(status) { + printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status); + } + printk(BIOS_DEBUG, "Got past agesawrapper_amdinitlate\n"); + + sbdn_sb700 = 0; + + for (i = 0; i < ARRAY_SIZE(bus_sb700); i++) { + bus_sb700[i] = 0; + } + for (i = 0; i < ARRAY_SIZE(bus_rd890); i++) { + bus_rd890[i] = 0; + } + + for (i = 0; i < 256; i++) { + bus_type[i] = 0; /* default ISA bus. */ + } + + + bus_type[0] = 1; /* pci */ + + bus_rd890[0] = (pci1234x[0] >> 16) & 0xff; + bus_sb700[0] = bus_rd890[0]; + + /* sb700 */ + dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); + + + + if (dev) { + bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + for (j = bus_sb700[1]; j < bus_isa; j++) + bus_type[j] = 1; + } + + /* rd890 */ + for (i = 1; i < ARRAY_SIZE(bus_rd890); i++) { + dev = dev_find_slot(bus_rd890[0], PCI_DEVFN(sbdn_rd890 + i, 0)); + if (dev) { + bus_rd890[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + if(255 != bus_rd890[i]) { + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + bus_type[bus_rd890[i]] = 1; /* PCI bus. */ + } + } + } + + + /* I/O APICs: APIC ID Version State Address */ + bus_isa = 10; + +#if CONFIG_AMD_SB_CIMX +// sb_After_Pci_Init(); +// sb_Late_Post(); +#endif + printk(BIOS_DEBUG, "Mainboard - Get_bus_conf.c - get_bus_conf - End.\n"); +} diff --git a/src/mainboard/amd/dinar/gpio.c b/src/mainboard/amd/dinar/gpio.c new file mode 100644 index 0000000..f18c09d --- /dev/null +++ b/src/mainboard/amd/dinar/gpio.c @@ -0,0 +1,482 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ + +#include "Filecode.h" +#include "Hudson-2.h" +#include "AmdSbLib.h" +#include "gpio.h" + +#define FILECODE UNASSIGNED_FILE_FILECODE + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ +#ifndef SB_GPIO_REG01 +#define SB_GPIO_REG01 1 +#endif + +#ifndef SB_GPIO_REG07 +#define SB_GPIO_REG07 7 +#endif + +#ifndef SB_GPIO_REG25 +#define SB_GPIO_REG25 25 +#endif + +#ifndef SB_GPIO_REG26 +#define SB_GPIO_REG26 26 +#endif + +#ifndef SB_GPIO_REG27 +#define SB_GPIO_REG27 27 +#endif + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ +void gpioEarlyInit (void); + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*--------------------------------------------------------------------------------------- + * L O C A L F U N C T I O N S + *--------------------------------------------------------------------------------------- + */ +void +gpioEarlyInit( + void + ) +{ + u8 Flags; + u8 Data8 = 0; + u8 StripInfo = 0; + u8 BoardType = 1; + u8 RegIndex8 = 0; + u8 boardRevC = 0x2; + u16 Data16 = 0; + u32 Index = 0; + u32 AcpiMmioAddr = 0; + u32 GpioMmioAddr = 0; + u32 IoMuxMmioAddr = 0; + u32 MiscMmioAddr = 0; + u32 SmiMmioAddr = 0; + u32 andMask32 = 0; + + // Enable HUDSON MMIO Base (AcpiMmioAddr) + ReadPMIO (SB_PMIOA_REG24, AccWidthUint8, &Data8); + Data8 |= BIT0; + WritePMIO (SB_PMIOA_REG24, AccWidthUint8, &Data8); + // Get HUDSON MMIO Base (AcpiMmioAddr) + ReadPMIO (SB_PMIOA_REG24 + 3, AccWidthUint8, &Data8); + Data16 = Data8 << 8; + ReadPMIO (SB_PMIOA_REG24 + 2, AccWidthUint8, &Data8); + Data16 |= Data8; + AcpiMmioAddr = (u32)Data16 << 16; + GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; + IoMuxMmioAddr = AcpiMmioAddr + IOMUX_BASE; + MiscMmioAddr = AcpiMmioAddr + MISC_BASE; + Data8 = Mmio8_G (MiscMmioAddr, SB_MISC_REG80); + if ((Data8 & BIT4) == 0) { + BoardType = 0; // external clock board + } + Data8 = Mmio8_G (GpioMmioAddr, GPIO_30); + StripInfo = (Data8 & BIT7) >> 7; + Data8 = Mmio8_G (GpioMmioAddr, GPIO_31); + StripInfo |= (Data8 & BIT7) >> 6; + if (StripInfo < boardRevC) { // for old board. Rev B + Mmio8_And_Or (IoMuxMmioAddr, GPIO_111, 0x00, 3); // function 3 + Mmio8_And_Or (IoMuxMmioAddr, GPIO_113, 0x00, 0); // function 0 + } + for (Index = 0; Index < MAX_GPIO_NO; Index++) { + if (!(((Index >= GPIO_RSVD_ZONE0_S) && (Index <= GPIO_RSVD_ZONE0_E)) || ((Index >= GPIO_RSVD_ZONE1_S) && (Index <= GPIO_RSVD_ZONE1_E)))) { + if ((StripInfo >= boardRevC) || ((Index != GPIO_111) && (Index != GPIO_113))) { + // Configure multi-funtion + Mmio8_And_Or (IoMuxMmioAddr, Index, 0x00, (gpio_table[Index].select & ~NonGpio)); + } + // Configure GPIO + if(!((gpio_table[Index].NonGpioGevent & NonGpio))) { + Mmio8_And_Or (GpioMmioAddr, Index, 0xDF, gpio_table[Index].type); + Mmio8_And_Or (GpioMmioAddr, Index, 0xA3, gpio_table[Index].value); + } + if (Index == GPIO_65) { + if ( BoardType == 0 ) { + Mmio8_And_Or (IoMuxMmioAddr, GPIO_65, 0x00, 3); // function 3 + } + } + } + // Configure GEVENT + if ((Index >= GEVENT_00) && (Index <= GEVENT_23) && ((gevent_table[Index - GEVENT_00].EventEnable))) { + SmiMmioAddr = AcpiMmioAddr + SMI_BASE; + + andMask32 = ~(1 << (Index - GEVENT_00)); + + //EventEnable: 0-Disable, 1-Enable + Mmio32_And_Or (SmiMmioAddr, SMIREG_EVENT_ENABLE, andMask32, (gevent_table[Index - GEVENT_00].EventEnable << (Index - GEVENT_00))); + + //SciTrig: 0-Falling Edge, 1-Rising Edge + Mmio32_And_Or (SmiMmioAddr, SMIREG_SCITRIG, andMask32, (gevent_table[Index - GEVENT_00].SciTrig << (Index - GEVENT_00))); + + //SciLevl: 0-Edge trigger, 1-Level Trigger + Mmio32_And_Or (SmiMmioAddr, SMIREG_SCILEVEL, andMask32, (gevent_table[Index - GEVENT_00].SciLevl << (Index - GEVENT_00))); + + //SmiSciEn: 0-Not send SMI, 1-Send SMI + Mmio32_And_Or (SmiMmioAddr, SMIREG_SMISCIEN, andMask32, (gevent_table[Index - GEVENT_00].SmiSciEn << (Index - GEVENT_00))); + + //SciS0En: 0-Disable, 1-Enable + Mmio32_And_Or (SmiMmioAddr, SMIREG_SCIS0EN, andMask32, (gevent_table[Index - GEVENT_00].SciS0En << (Index - GEVENT_00))); + + //SciMap: 00000b ~ 11111b + RegIndex8=(u8)((Index - GEVENT_00) >> 2); + Data8=(u8)(((Index - GEVENT_00) & 0x3) * 8); + Mmio32_And_Or (SmiMmioAddr, SMIREG_SCIMAP0+RegIndex8, ~(GEVENT_SCIMASK << Data8), (gevent_table[Index - GEVENT_00].SciMap << Data8)); + + //SmiTrig: 0-Active Low, 1-Active High + Mmio32_And_Or (SmiMmioAddr, SMIREG_SMITRIG, ~(gevent_table[Index - GEVENT_00].SmiTrig << (Index - GEVENT_00)), (gevent_table[Index - GEVENT_00].SmiTrig << (Index - GEVENT_00))); + + //SmiControl: 0-Disable, 1-SMI, 2-NMI, 3-IRQ13 + RegIndex8=(u8)((Index - GEVENT_00) >> 4); + Data8=(u8)(((Index - GEVENT_00) & 0xF) * 2); + Mmio32_And_Or (SmiMmioAddr, SMIREG_SMICONTROL0+RegIndex8, ~(SMICONTROL_MASK << Data8), (gevent_table[Index - GEVENT_00].SmiControl << Data8)); + } + } + + // + // config MXM + // GPIO9: Input for MXM_PRESENT2# + // GPIO10: Input for MXM_PRESENT1# + // GPIO28: Input for MXM_PWRGD + // GPIO35: Output for MXM Reset + // GPIO45: Output for MXM Power Enable, active HIGH + // GPIO55: Output for MXM_PWR_EN, 1 - Enable, 0 - Disable + // GPIO32: Output for PCIE_SW, 1 - MXM, 0 - LASSO + // + // set INTE#/GPIO32 as GPO for PCIE_SW + RWMEM (IoMuxMmioAddr + SB_GPIO_REG32, AccWidthUint8, 00, 0x1); // GPIO + RWMEM (GpioMmioAddr + SB_GPIO_REG32, AccWidthUint8, 0x03, 0); // GPO + RWMEM (GpioMmioAddr + SB_GPIO_REG32, AccWidthUint8, 0x23, BIT3+BIT6); + + // set SATA_IS4#/FANOUT3/GPIO55 as GPO for MXM_PWR_EN + RWMEM (IoMuxMmioAddr + SB_GPIO_REG55, AccWidthUint8, 00, 0x2); // GPIO + RWMEM (GpioMmioAddr + SB_GPIO_REG55, AccWidthUint8, 0x03, 0); // GPO + + // set AD9/GPIO9 as GPI for MXM_PRESENT2# + RWMEM (IoMuxMmioAddr + SB_GPIO_REG09, AccWidthUint8, 00, 0x1); // GPIO + RWMEM (GpioMmioAddr + SB_GPIO_REG09, AccWidthUint8, 0x03, BIT5); // GPI + + // set AD10/GPIO10 as GPI for MXM_PRESENT1# + RWMEM (IoMuxMmioAddr + SB_GPIO_REG10, AccWidthUint8, 00, 0x1); // GPIO + RWMEM (GpioMmioAddr + SB_GPIO_REG10, AccWidthUint8, 0x03, BIT5); // GPI + + // set GNT1#/GPIO44 as GPO for MXM Reset + RWMEM (IoMuxMmioAddr + SB_GPIO_REG44, AccWidthUint8, 00, 0x1); // GPIO + RWMEM (GpioMmioAddr + SB_GPIO_REG44, AccWidthUint8, 0x03, 0); // GPO + + // set GNT2#/SD_LED/GPO45 as GPO for MXM Power Enable + RWMEM (IoMuxMmioAddr + SB_GPIO_REG45, AccWidthUint8, 00, 0x2); // GPIO + RWMEM (GpioMmioAddr + SB_GPIO_REG45, AccWidthUint8, 0x03, 0); // GPO + + // set AD28/GPIO28 as GPI for MXM_PWRGD + RWMEM (IoMuxMmioAddr + SB_GPIO_REG28, AccWidthUint8, 00, 0x1); // GPIO + RWMEM (GpioMmioAddr + SB_GPIO_REG28, AccWidthUint8, 0x03, BIT5); // GPI + + // set BIT3=1 (PULLUP disable), BIT4=0 (PULLDOWN Disable), BIT6=0 (Output LOW) + RWMEM (GpioMmioAddr + SB_GPIO_REG55, AccWidthUint8, 0x23, BIT3); + RWMEM (GpioMmioAddr + SB_GPIO_REG09, AccWidthUint8, 0x23, BIT3); + RWMEM (GpioMmioAddr + SB_GPIO_REG10, AccWidthUint8, 0x23, BIT3); + RWMEM (GpioMmioAddr + SB_GPIO_REG44, AccWidthUint8, 0x23, BIT3); + RWMEM (GpioMmioAddr + SB_GPIO_REG45, AccWidthUint8, 0x23, BIT3); + RWMEM (GpioMmioAddr + SB_GPIO_REG28, AccWidthUint8, 0x23, BIT3); + + // + // [GPIO] STRP_DATA: 1->RS880M VCC_NB 1.0V. 0->RS880M VCC_NB 1.1V (Default). + // + //Fusion_Llano BLWriteNBMISC_Dword (ATI_MISC_REG42, (BLReadNBMISC_Dword (ATI_MISC_REG42) | BIT20)); + //Fusion_Llano BLWriteNBMISC_Dword (ATI_MISC_REG40, (BLReadNBMISC_Dword (ATI_MISC_REG40) & (~BIT20))); + + // check if there any GFX card + Flags = 0; + // Value32 = MmPci32 (0, SB_ISA_BUS, SB_ISA_DEV, SB_ISA_FUNC, R_SB_ISA_GPIO_CONTROL); + // Data8 = Mmio8 (GpioMmioAddr, SB_GPIO_REG09); + ReadMEM (GpioMmioAddr + SB_GPIO_REG09, AccWidthUint8, &Data8); + if (!(Data8 & BIT7)) + { + //Data8 = Mmio8 (GpioMmioAddr, SB_GPIO_REG10); + ReadMEM (GpioMmioAddr + SB_GPIO_REG10, AccWidthUint8, &Data8); + if (!(Data8 & BIT7)) + { + Flags = 1; + } + } + if ( Flags ) + { + // [GPIO] GPIO44: PE_GPIO0 MXM Reset set to 0 for reset, ENH164467 + RWMEM (GpioMmioAddr + SB_GPIO_REG44, AccWidthUint8, 0xBF, 0); + + // [GPIO] GPIO45: PE_GPIO1 MXM_POWER_ENABLE, SET HIGH + RWMEM (GpioMmioAddr + SB_GPIO_REG45, AccWidthUint8, 0xFF, BIT6); + + //PeiStall (PeiServices, NULL, 100); //delay 100 ms (should be >1ms) + SbStall (10000); + + // Write the GPIO55(MXM_PWR_EN) to enable the integrated power module + RWMEM (GpioMmioAddr + SB_GPIO_REG55, AccWidthUint8, 0xFF, BIT6); + + //PeiStall (PeiServices, NULL, 100); //delay 100 ms (should be >1ms) + // WAIT POWER READY: GPIO28 (MXM_PWRGD) + //while (!(Mmio8 (GpioMmioAddr, SB_GPIO_REG28) && BIT7)){} + ReadMEM (GpioMmioAddr + SB_GPIO_REG28, AccWidthUint8, &Data8); + while (!(Data8 && BIT7)) + { + ReadMEM (GpioMmioAddr + SB_GPIO_REG28, AccWidthUint8, &Data8); + } + // [GPIO] GPIO44: PE_GPIO0 MXM Reset set to 1 for reset + // RWMEM (GpioMmioAddr + SB_GPIO_REG44, AccWidthUint8, 0xBF, BIT6); + } + else + { + // Write the GPIO55(MXM_PWR_EN) to disable the integrated power module + RWMEM (GpioMmioAddr + SB_GPIO_REG55, AccWidthUint8, 0xBF, 0); + + //PeiStall (PeiServices, NULL, 100); //delay 100 ms (should be >1ms) + SbStall (10000); + + // [GPIO] GPIO45: PE_GPIO1 MXM_POWER_ENABLE down + RWMEM (GpioMmioAddr + SB_GPIO_REG45, AccWidthUint8, 0xBF, 0); + } + + // + // APU GPP0: On board LAN + // GPIO25: PCIE_RST#_LAN, LOW active + // GPIO63: LAN_CLKREQ# + // GPIO197: LOM_POWER, HIGH Active + // Clock: GPP_CLK3 + // + // Set EC_PWM0/EC_TIMER0/GPIO197 as GPO for LOM_POWER + RWMEM (IoMuxMmioAddr + SB_GPIO_REG197, AccWidthUint8, 00, 0x2); // GPIO + // RWMEM (GpioMmioAddr + SB_GPIO_REG197, AccWidthUint8, 0x03, 0); // GPO + RWMEM (GpioMmioAddr + SB_GPIO_REG197, AccWidthUint8, 0x03, BIT6); // output HIGH + RWMEM (GpioMmioAddr + SB_GPIO_REG197, AccWidthUint8, 0x63, BIT3); // pullup DISABLE + + // Setup AD25/GPIO25 as GPO for PCIE_RST#_LAN: + RWMEM (IoMuxMmioAddr + SB_GPIO_REG25, AccWidthUint8, 00, 0x1); // GPIO + // RWMEM (GpioMmioAddr + SB_GPIO_REG25, AccWidthUint8, 0x03, 0); // GPO + RWMEM (GpioMmioAddr + SB_GPIO_REG25, AccWidthUint8, 0x03, BIT6); // output HIGH + RWMEM (GpioMmioAddr + SB_GPIO_REG25, AccWidthUint8, 0x63, BIT3); // pullup DISABLE + + + // set CLK_REQ3#/SATA_IS1#/GPIO63 as CLK_REQ for LAN_CLKREQ# + RWMEM (IoMuxMmioAddr + SB_GPIO_REG63, AccWidthUint8, 00, 0x0); // CLK_REQ3# + RWMEM (MiscMmioAddr + SB_MISC_REG00+1, AccWidthUint8, 0x0F, 0xF0); // Enable GPP_CLK3 + + // + // APU GPP1: WUSB + // GPIO1: MPCIE_RST2#, LOW active + // GPIO13: WU_DISABLE#, LOW active + // GPIO177: MPICE_PD2, 1 - DISABLE, 0 - ENABLE (Default) + // + // Setup VIN2/SATA1_1/GPIO177 as GPO for MPCIE_PD2#: wireless disable + RWMEM (IoMuxMmioAddr + SB_GPIO_REG177, AccWidthUint8, 00, 0x2); // GPIO + // RWMEM (GpioMmioAddr + SB_GPIO_REG177, AccWidthUint8, 0x03, 0); // GPO + RWMEM (GpioMmioAddr + SB_GPIO_REG177, AccWidthUint8, 0x03, 0); // output LOW + RWMEM (GpioMmioAddr + SB_GPIO_REG177, AccWidthUint8, 0x63, BIT3); // pullup DISABLE + + // Setup AD01/GPIO01 as GPO for MPCIE_RST2# + RWMEM (IoMuxMmioAddr + SB_GPIO_REG01, AccWidthUint8, 00, 0x1); // GPIO + // RWMEM (GpioMmioAddr + SB_GPIO_REG01, AccWidthUint8, 0x03, 0); // GPO + RWMEM (GpioMmioAddr + SB_GPIO_REG01, AccWidthUint8, 0x03, BIT6); // output LOW + RWMEM (GpioMmioAddr + SB_GPIO_REG01, AccWidthUint8, 0x63, BIT3); // pullup DISABLE + + // Setup AD13/GPIO13 as GPO for WU_DISABLE#: disable WUSB + // RWMEM (IoMuxMmioAddr + SB_GPIO_REG13, AccWidthUint8, 00, 0x1); // GPIO + // RWMEM (GpioMmioAddr + SB_GPIO_REG13, AccWidthUint8, 0x03, 0); // GPO + // RWMEM (GpioMmioAddr + SB_GPIO_REG13, AccWidthUint8, 0x03, BIT6); // output HIGH + // RWMEM (GpioMmioAddr + SB_GPIO_REG13, AccWidthUint8, 0x63, BIT3); // pullup DISABLE + + // + // APU GPP2: WWAN + // GPIO0: MPCIE_RST1#, LOW active + // GPIO14: WP_DISABLE#, LOW active + // GPIO176: MPICE_PD1, 1 - DISABLE, 0 - ENABLE (Default) + // + // Set VIN1/GPIO176 as GPO for MPCIE_PD1# for wireless disable + RWMEM (IoMuxMmioAddr + SB_GPIO_REG176, AccWidthUint8, 00, 0x1); // GPIO + // RWMEM (GpioMmioAddr + SB_GPIO_REG176, AccWidthUint8, 0x03, 0); // GPO + RWMEM (GpioMmioAddr + SB_GPIO_REG176, AccWidthUint8, 0x03, 0); // output LOW + RWMEM (GpioMmioAddr + SB_GPIO_REG176, AccWidthUint8, 0x63, BIT3); // pullup DISABLE + + // Set AD00/GPIO00 as GPO for MPCIE_RST1# + RWMEM (IoMuxMmioAddr + SB_GPIO_REG00, AccWidthUint8, 00, 0x1); // GPIO + // RWMEM (GpioMmioAddr + SB_GPIO_REG00, AccWidthUint8, 0x03, 0); // GPO + // RWMEM (GpioMmioAddr + SB_GPIO_REG00, AccWidthUint8, 0x03, BIT6); // output LOW + RWMEM (GpioMmioAddr + SB_GPIO_REG00, AccWidthUint8, 0x63, BIT3); // pullup DISABLE + + // Set AD14/GPIO14 as GPO for WP_DISABLE#: disable WWAN + // RWMEM (IoMuxMmioAddr + SB_GPIO_REG14, AccWidthUint8, 00, 0x1); // GPIO + // RWMEM (GpioMmioAddr + SB_GPIO_REG14, AccWidthUint8, 0x03, 0); // GPO + // RWMEM (GpioMmioAddr + SB_GPIO_REG14, AccWidthUint8, 0x03, BIT6); + // RWMEM (GpioMmioAddr + SB_GPIO_REG14, AccWidthUint8, 0x63, BIT3); + + // + // APU GPP3: 1394 + // GPIO59: Power control, HIGH active + // GPIO27: PCIE_RST#_1394, LOW active + // GPIO41: CLKREQ# + // Clock: GPP_CLK8 + // + // Setup SATA_IS5#/FANIN3/GPIO59 as GPO for 1394_ON: + RWMEM (IoMuxMmioAddr + SB_GPIO_REG59, AccWidthUint8, 00, 0x2); // GPIO + // RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0x03, 0); // GPO + RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0x03, BIT6); // output HIGH + RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0x63, BIT3); // pullup DISABLE + + // Setup AD27/GPIO27 as GPO for MPCIE_RST#_1394 + RWMEM (IoMuxMmioAddr + SB_GPIO_REG27, AccWidthUint8, 00, 0x1); // GPIO + // RWMEM (GpioMmioAddr + SB_GPIO_REG27, AccWidthUint8, 0x03, 0); // GPO + RWMEM (GpioMmioAddr + SB_GPIO_REG27, AccWidthUint8, 0x03, BIT6); // output HIGH + RWMEM (GpioMmioAddr + SB_GPIO_REG27, AccWidthUint8, 0x63, BIT3); // pullup DISABLE + + // set REQ2#/CLK_REQ2#/GPIO41 as CLK_REQ# + RWMEM (IoMuxMmioAddr + SB_GPIO_REG41, AccWidthUint8, 00, 0x1); // CLK_REQ2# + + // set AZ_SDIN3/GPIO170 as GPO for GPIO_GATE_C + RWMEM (IoMuxMmioAddr + SB_GPIO_REG170, AccWidthUint8, 00, 0x1); // GPIO + RWMEM (GpioMmioAddr + SB_GPIO_REG170, AccWidthUint8, 0x03, 0); // GPO + RWMEM (GpioMmioAddr + SB_GPIO_REG170, AccWidthUint8, 0x03, BIT6); // output HIGH + RWMEM (GpioMmioAddr + SB_GPIO_REG170, AccWidthUint8, 0x63, BIT3); // pullup DISABLE + // To fix glitch issue + RWMEM (GpioMmioAddr + SB_GPIO_REG170, AccWidthUint8, 0xBF, 0); // set GPIO_GATE_C to LOW + // + // Enable/Disable OnBoard LAN + // + if (!CONFIG_ONBOARD_LAN) + { // 1 - DISABLED + RWMEM (GpioMmioAddr + SB_GPIO_REG197, AccWidthUint8, 0xBF, 0); // LOM_POWER off + RWMEM (GpioMmioAddr + SB_GPIO_REG25, AccWidthUint8, 0xBF, 0); + RWMEM (GpioMmioAddr + SB_GPIO_REG63, AccWidthUint8, 0xFF, BIT3); // PULL UP - DISABLED + RWMEM (MiscMmioAddr + SB_MISC_REG00+1, AccWidthUint8, 0x0F, 0); // Disable GPP_CLK3 + } + // else + // { // 0 - AUTO + // // set BIT3=1 (PULLUP disable), BIT4=0 (PULLDOWN Disable) + // RWMEM (GpioMmioAddr + SB_GPIO_REG197, AccWidthUint8, 0x23, BIT3); + // RWMEM (GpioMmioAddr + SB_GPIO_REG25, AccWidthUint8, 0x23, BIT3); + // } + + + // + // Enable/Disable 1394 + // + if (!CONFIG_ONBOARD_1394) + { // 1 - DISABLED + // RWMEM (GpioMmioAddr + SB_GPIO_REG170, AccWidthUint8, 0xBF, 0); // set GPIO_GATE_C to LOW + RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0xBF, 0); // 1394 power off + RWMEM (GpioMmioAddr + SB_GPIO_REG27, AccWidthUint8, 0xBF, 0); + RWMEM (GpioMmioAddr + SB_GPIO_REG41, AccWidthUint8, 0xFF, BIT3); // pullup DISABLE + RWMEM (MiscMmioAddr + SB_MISC_REG04, AccWidthUint8, 0xF0, 0); // DISABLE GPP_CLK8 + // RWMEM (GpioMmioAddr + SB_GPIO_REG170, AccWidthUint8, 0xBF, BIT6); // set GPIO_GATE_C to HIGH + } + // else + // { // 0 - AUTO + // // set BIT3=1 (PULLUP disable), BIT4=0 (PULLDOWN Disable), BIT6=1 (output HIGH) + // RWMEM (GpioMmioAddr + SB_GPIO_REG27, AccWidthUint8, 0x03, BIT6); + // RWMEM (GpioMmioAddr + SB_GPIO_REG27, AccWidthUint8, 0x63, BIT3); + // + // RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0x03, BIT6); + // RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0x63, BIT3); + // } + + // + // external USB 3.0 control: + // amdExternalUSBController: CMOS, 0 - AUTO, 1 - DISABLE + // GPIO26: PCIE_RST#_USB3.0 + // GPIO46: PCIE_USB30_CLKREQ# + // GPIO200: NEC_USB30_PWR_EN, 0 - OFF, 1 - ON + // Clock: GPP_CLK7 + // GPIO172 used as FCH_USB3.0PORT_EN# 0:ENABLE; 1:DISABLE + // if ((Amd_SystemConfiguration.XhciSwitch == 1) || (SystemConfiguration.amdExternalUSBController == 1)) { + // disable Onboard NEC USB3.0 controller + if (!CONFIG_ONBOARD_USB30) { + RWMEM (GpioMmioAddr + SB_GPIO_REG200, AccWidthUint8, 0xBF, 0); + RWMEM (GpioMmioAddr + SB_GPIO_REG26, AccWidthUint8, 0xBF, 0); + RWMEM (GpioMmioAddr + SB_GPIO_REG46, AccWidthUint8, 0xFF, BIT3); // PULL_UP DISABLE + RWMEM (MiscMmioAddr + SB_MISC_REG00+3, AccWidthUint8, 0x0F, 0); // DISABLE GPP_CLK7 + RWMEM (GpioMmioAddr + SB_GPIO_REG172, AccWidthUint8, 0xBF, 0); // FCH_USB3.0PORT_EN# 0:ENABLE; 1:DISABLE + } + // } + + // + // BlueTooth control: BT_ON + // amdBlueTooth: CMOS, 0 - AUTO, 1 - DISABLE + // GPIO07: BT_ON, 0 - OFF, 1 - ON + // + if (!CONFIG_ONBOARD_BLUETOOTH) { + //- if (SystemConfiguration.amdBlueTooth == 1) { + RWMEM (GpioMmioAddr + SB_GPIO_REG07, AccWidthUint8, 0xBF, 0); + //- } + } + + // + // WebCam control: + // amdWebCam: CMOS, 0 - AUTO, 1 - DISABLE + // GPIO34: WEBCAM_ON#, 0 - ON, 1 - OFF + // + if (!CONFIG_ONBOARD_WEBCAM) { + //- if (SystemConfiguration.amdWebCam == 1) { + RWMEM (GpioMmioAddr + SB_GPIO_REG34, AccWidthUint8, 0xBF, BIT6); + //- } + } + + // + // Travis enable: + // amdTravisCtrl: CMOS, 0 - DISABLE, 1 - ENABLE + // GPIO66: TRAVIS_EN#, 0 - ENABLE, 1 - DISABLE + // + if (!CONFIG_ONBOARD_TRAVIS) { + //- if (SystemConfiguration.amdTravisCtrl == 0) { + RWMEM (GpioMmioAddr + SB_GPIO_REG66, AccWidthUint8, 0xBF, BIT6); + //- } + } + + // + // Disable Light Sensor if needed + // + if (CONFIG_ONBOARD_LIGHTSENSOR) { + //- if (SystemConfiguration.amdLightSensor == 1) { + RWMEM (IoMuxMmioAddr + SB_GEVENT_REG12, AccWidthUint8, 0x00, 0x1); + //- } + } + +} + + diff --git a/src/mainboard/amd/dinar/gpio.h b/src/mainboard/amd/dinar/gpio.h new file mode 100644 index 0000000..c936e50 --- /dev/null +++ b/src/mainboard/amd/dinar/gpio.h @@ -0,0 +1,2329 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ + + +#ifndef _GPIO_H_ +#define _GPIO_H_ + +#include <stdint.h> +#include <cbtypes.h> + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ +#define Mmio_Address( BaseAddr, Register ) \ + ( (UINTN)BaseAddr + \ + (UINTN)(Register) \ + ) + +#define Mmio32_Ptr( BaseAddr, Register ) \ + ( (volatile u32 *)Mmio_Address( BaseAddr, Register ) ) + +#define Mmio32_G( BaseAddr, Register ) \ + *Mmio32_Ptr( BaseAddr, Register ) + +#define Mmio32_And_Or( BaseAddr, Register, AndData, OrData ) \ + Mmio32_G( BaseAddr, Register ) = \ +(u32) ( \ + ( Mmio32_G( BaseAddr, Register ) & \ + (u32)(AndData) \ + ) | \ + (u32)(OrData) \ + ) + +#define Mmio8_Ptr( BaseAddr, Register ) \ + ( (volatile u8 *)Mmio_Address( BaseAddr, Register ) ) + +#define Mmio8_G( BaseAddr, Register ) \ + *Mmio8_Ptr( BaseAddr, Register ) + +#define Mmio8_And_Or( BaseAddr, Register, AndData, OrData ) \ + Mmio8_G( BaseAddr, Register ) = \ +(u8) ( \ + ( Mmio8_G( BaseAddr, Register ) & \ + (u8)(AndData) \ + ) | \ + (u8)(OrData) \ + ) + +#define SMIREG_EVENT_ENABLE 0x04 +#define SMIREG_SCITRIG 0x08 +#define SMIREG_SCILEVEL 0x0C +#define SMIREG_SMISCIEN 0x14 +#define SMIREG_SCIS0EN 0x20 +#define SMIREG_SCIMAP0 0x40 +#define SMIREG_SCIMAP1 0x44 +#define SMIREG_SCIMAP2 0x48 +#define SMIREG_SCIMAP3 0x4C +#define SMIREG_SCIMAP4 0x50 +#define SMIREG_SCIMAP5 0x54 +#define SMIREG_SCIMAP6 0x58 +#define SMIREG_SCIMAP7 0x5C +#define SMIREG_SCIMAP8 0x60 +#define SMIREG_SCIMAP9 0x64 +#define SMIREG_SCIMAP10 0x68 +#define SMIREG_SCIMAP11 0x6C +#define SMIREG_SCIMAP12 0x70 +#define SMIREG_SCIMAP13 0x74 +#define SMIREG_SCIMAP14 0x78 +#define SMIREG_SCIMAP15 0x7C +#define SMIREG_SMITRIG 0x98 +#define SMIREG_SMICONTROL0 0xA0 +#define SMIREG_SMICONTROL1 0xA4 + +#define FUNCTION0 0 +#define FUNCTION1 1 +#define FUNCTION2 2 +#define FUNCTION3 3 +#define NonGpio 0x80 // BIT7 + +// S0-domain General Purpose I/O: GPIO 00~67 +#define GPIO_00_SELECT FUNCTION1+NonGpio // MPCIE_RST1# for J3703, LOW ACTIVE, HIGH DEFAULT +#define GPIO_01_SELECT FUNCTION1+NonGpio // MPCIE_RST2# for J3711, LOW ACTIVE, HIGH DEFAULT +#define GPIO_02_SELECT FUNCTION1 // MPCIE_RST0# for J3700, LOW ACTIVE, HIGH DEFAULT +#define GPIO_03_SELECT FUNCTION1+NonGpio // NOT USED +#define GPIO_04_SELECT FUNCTION1+NonGpio // x1 gpp reset, for J3701, low active, HIGH DEFAULT +#define GPIO_05_SELECT FUNCTION1+NonGpio // express card reset, for J2500, low active, HIGH DEFAULT +#define GPIO_06_SELECT FUNCTION0+NonGpio //NOT USED +#define GPIO_07_SELECT FUNCTION1 // BT_ON, 1: BT ON(DEFAULT); 0: BT OFF +#define GPIO_08_SELECT FUNCTION1 // PEX_STD_SW#, 1:Low Level Mode(default); 0:Standard(desktop) Swing Level +#define GPIO_09_SELECT FUNCTION1+NonGpio // MXM_PRESENT2#, INPUT, LOW MEANS MXM IS INSTALLED +#define GPIO_10_SELECT FUNCTION1+NonGpio // MXM_PRESENT1#, INPUT, LOW MEANS MXM IS INSTALLED +#define GPIO_11_SELECT FUNCTION0+NonGpio // NOT USED +#define GPIO_12_SELECT FUNCTION1 // WL_DISABLE#, DISABLE THE WALN IN J3702 +#define GPIO_13_SELECT FUNCTION1 // WU_DISABLE#, DISABLE THE WUSB IN J3711 +#define GPIO_14_SELECT FUNCTION1 // WP_DISABLE, DISABLE THE WWAN IN J3703 +#define GPIO_15_SELECT FUNCTION1+NonGpio // NOT USED, //FUNCTION1, Reset_CEC# Low Active, High default +#define GPIO_16_SELECT FUNCTION0+NonGpio // NOT USED +#define GPIO_17_SELECT FUNCTION0+NonGpio // NOT USED +#define GPIO_18_SELECT FUNCTION0+NonGpio // NOT USED +#define GPIO_19_SELECT FUNCTION1 // For LASSO_DET# detection when Gevent14# is asserted. +#define GPIO_20_SELECT FUNCTION1 // PX_MUX for DOCKING card, PX MUX selection in mux mode. dGPU enable with high(option) +#define GPIO_21_SELECT FUNCTION1 // DOCK_MUX for DCKING card, MUX selection output. Docking display enabled when high(option) +#define GPIO_22_SELECT FUNCTION1 // SB_PWR_LV, INDICATE TO THE MXM THE SYSTEM IS IN LOW BATTERY MODE +// 1:BATTERY IS FINE(DEFAULT) +// 0:BATTERY IS LOW +#define GPIO_23_SELECT FUNCTION1 // CODEC_ON.1: CODEC ON (default)0: CODEC OFF +#define GPIO_24_SELECT FUNCTION1 // Travis reset,Low active High default +#define GPIO_25_SELECT FUNCTION1+NonGpio // PCIE_RST# for LAN (AND gate with PCIE_RST#); default high +#define GPIO_26_SELECT FUNCTION1+NonGpio // PCIE_RST# for USB3.0 (AND gate with PCIE_RST#); default high +#define GPIO_27_SELECT FUNCTION1+NonGpio // PCIE_RST# for 1394 (AND gate with PCIE_RST#); default high +#define GPIO_28_SELECT FUNCTION1 // MXM PWRGD INDICATOR, INPUT +#define GPIO_29_SELECT FUNCTION1 // MEM HOT, LOW ACTIVE, OUTPUT +#define GPIO_30_SELECT FUNCTION1 // INPUT, DEFINE THE BOARD REVISION 0 +#define GPIO_31_SELECT FUNCTION1 // INPUT, DEFINE THE BOARD REVISION 1 +// 00 - REVA +// 01 - REVB +// 10 - REVC +// 11 - REVD +#define GPIO_32_SELECT FUNCTION1+NonGpio // PCIE_SW - HIGH:MXM; LOW:LASSO +#define GPIO_33_SELECT FUNCTION1 // USB3.0 DETECT of Express Card:USB3.0_DET#, Low active. +// 0:USB3.0 I/F in Express CARD +// 1:PCIE I/F in Express CARD detection +#define GPIO_34_SELECT FUNCTION1 // WEBCAM_ON#. 0: ON (default) 1: OFF +#define GPIO_35_SELECT FUNCTION1 // ODD_DA_INTH# +#define GPIO_36_SELECT FUNCTION0+NonGpio // PCICLK FOR KBC +#define GPIO_37_SELECT FUNCTION0+NonGpio // NOT USED +#define GPIO_38_SELECT FUNCTION0+NonGpio // NOT USED +#define GPIO_39_SELECT FUNCTION0+NonGpio // NOT USED +#define GPIO_40_SELECT FUNCTION1 // For DOCK# detection when Gevent14# is asserted. +#define GPIO_41_SELECT FUNCTION1+NonGpio // 1394 CLK REQ# +#define GPIO_42_SELECT FUNCTION1+NonGpio // X4 GPP CLK REQ# +#define GPIO_43_SELECT FUNCTION0+NonGpio // SMBUS0, CLOCK +#define GPIO_44_SELECT FUNCTION1+NonGpio // PEGPIO0, RESET THE MXM MODULE +#define GPIO_45_SELECT FUNCTION2+NonGpio // PEGPIO1, 1:MXM IS POWER ON; 0:MXM IS OFF +#define GPIO_46_SELECT FUNCTION1+NonGpio // USB3.0_CLKREQ# +#define GPIO_47_SELECT FUNCTION0+NonGpio // SMBUS0, DATA +#define GPIO_48_SELECT FUNCTION0+NonGpio // SERIRQ +#define GPIO_49_SELECT FUNCTION0+NonGpio // LDRQ#1 +#define GPIO_50_SELECT FUNCTION2 // SMARTVOLTAGE TO CONTROL THE 5V - 1:5V; 0:4.56V +#define GPIO_51_SELECT FUNCTION0+NonGpio // back-up for SMARTVOLTAGE1 +#define GPIO_52_SELECT FUNCTION0+NonGpio // CPU FAN OUT +#define GPIO_53_SELECT FUNCTION1 // ODD POWER ENABLE, HIGH ACTIVE +#define GPIO_54_SELECT FUNCTION0+NonGpio // SB_PROCHOT, OUTPUT, LOW ACTIVE +#define GPIO_55_SELECT FUNCTION2+NonGpio // MXM POWER ENABLE(POWER ON MODULE) +// 1:ENABLE; 0:DISABLE +// DEFAULT VALUE DEPENDS ON GPIO 9 AND 10 +#define GPIO_56_SELECT FUNCTION0+NonGpio //HDD2_POWER/HDD0_POWER/CPU FAN ;CPU FAN +#define GPIO_57_SELECT FUNCTION1 // HDD0_POWER +#define GPIO_58_SELECT FUNCTION1 // HDD2_POWER +#define GPIO_59_SELECT FUNCTION2+NonGpio // 1394 POWER, OUTPUT, HIGH ACTIVE +#define GPIO_60_SELECT FUNCTION0+NonGpio // EXPCARD_CLKREQ# +#define GPIO_61_SELECT FUNCTION0+NonGpio // PE0_CLKREQ#, FROM J3700 +#define GPIO_62_SELECT FUNCTION0+NonGpio // PE2_CLKREQ#, FROM J3711 +#define GPIO_63_SELECT FUNCTION0+NonGpio // LAN_CLKREQ# +#define GPIO_64_SELECT FUNCTION0+NonGpio // PE1_CLKREQ#, FROM J3703 +#define GPIO_65_SELECT FUNCTION0+NonGpio // MXM CLK REQ#, FROM MXM +#define GPIO_66_SELECT FUNCTION1 // USED AS TRAVIS_EN#; 0:ENABLE as default +#define GPIO_67_SELECT FUNCTION0+NonGpio // USED AS SATA_ACT# +#define GPIO_68_SELECT FUNCTION0+NonGpio +#define GPIO_69_SELECT FUNCTION0+NonGpio +#define GPIO_70_SELECT FUNCTION0+NonGpio +#define GPIO_71_SELECT FUNCTION0+NonGpio +#define GPIO_72_SELECT FUNCTION0+NonGpio +#define GPIO_73_SELECT FUNCTION0+NonGpio +#define GPIO_74_SELECT FUNCTION0+NonGpio +#define GPIO_75_SELECT FUNCTION0+NonGpio +#define GPIO_76_SELECT FUNCTION0+NonGpio +#define GPIO_77_SELECT FUNCTION0+NonGpio +#define GPIO_78_SELECT FUNCTION0+NonGpio +#define GPIO_79_SELECT FUNCTION0+NonGpio +#define GPIO_80_SELECT FUNCTION0+NonGpio +#define GPIO_81_SELECT FUNCTION0+NonGpio +#define GPIO_82_SELECT FUNCTION0+NonGpio +#define GPIO_83_SELECT FUNCTION0+NonGpio +#define GPIO_84_SELECT FUNCTION0+NonGpio +#define GPIO_85_SELECT FUNCTION0+NonGpio +#define GPIO_86_SELECT FUNCTION0+NonGpio +#define GPIO_87_SELECT FUNCTION0+NonGpio +#define GPIO_88_SELECT FUNCTION0+NonGpio +#define GPIO_89_SELECT FUNCTION0+NonGpio +#define GPIO_90_SELECT FUNCTION0+NonGpio +#define GPIO_91_SELECT FUNCTION0+NonGpio +#define GPIO_92_SELECT FUNCTION0+NonGpio +#define GPIO_93_SELECT FUNCTION0+NonGpio +#define GPIO_94_SELECT FUNCTION0+NonGpio +#define GPIO_95_SELECT FUNCTION0+NonGpio +// GEVENT 00~23 are mapped to GPIO 96~119 +#define GPIO_96_SELECT FUNCTION0 // GA20IN/GEVENT0# +#define GPIO_97_SELECT FUNCTION0 // KBRST#/GEVENT1# +#define GPIO_98_SELECT FUNCTION0 // THRMTRIP#/SMBALERT#/GEVENT2# -> APU_THERMTRIP +#define GPIO_99_SELECT FUNCTION1 // LPC_PME#/GEVENT3# -> EC_SCI# +#define GPIO_100_SELECT FUNCTION2 // PCIE_RST2#/PCI_PME#/GEVENT4# -> APU_MEMHOT# +#define GPIO_101_SELECT FUNCTION1 // LPC_PD#/GEVENT5# -> hotplug of express card, low active +#define GPIO_102_SELECT FUNCTION0+NonGpio // USB_OC6#/IR_TX1/ GEVENT6# -> NOT USED, +// there is a confliction to IR function when this pin is as a GEVENT. +#define GPIO_103_SELECT FUNCTION0+NonGpio // DDR3_RST#/GEVENT7#/VGA_PD -> VGA_PD, +// special pin difination for SB700 VGA OUTPUT, high active, +// VGA power for Hudson-M2 will be down when it was asserted. +#define GPIO_104_SELECT FUNCTION0 // WAKE#/GEVENT8# -> WAKEUP, low active +#define GPIO_105_SELECT FUNCTION2 // SPI_HOLD/GBE_LED1/GEVENT9# - WF_RADIO (wireless radio) +#define GPIO_106_SELECT FUNCTION0 // GBE_LED2/GEVENT10# -> GBE_LED2 +#define GPIO_107_SELECT FUNCTION0+NonGpio // GBE_STAT0/GEVENT11# -> GBE_STAT0 +#define GPIO_108_SELECT FUNCTION2 // USB_OC0#/TRST#/GEVENT12# -> SMBALERT# (Light Sensor), low active +// [option for SPI_TPM_CS# in Hudson-M2 A12)] +#define GPIO_109_SELECT FUNCTION0 // USB_OC1#/TDI/GEVENT13# - USB OC for 0, 1,2,3 & USB_OC expresscard (usb4) & +// USB3.0 PORT0,1:low active,disable all usb ports and new card power at a same time +#define GPIO_110_SELECT FUNCTION2 // USB_OC2#/TCK/GEVENT14# -> Lasso detect or Dock detect, +// plus judge GPIO40 and GPIO19 level,low is assert. +// LASSO_DET# :0 & GPIO19:0 -----> LASSO is present (default) +// DOCK#:0 & GPIO40:0 -----------> DOCK is present(option) +#define GPIO_111_SELECT FUNCTION1+NonGpio // USB_OC3#/AC_PRES/TDO/GEVENT15# -> AC_PRES, high active +#define GPIO_112_SELECT FUNCTION2 // USB_OC4#/IR_RX0/GEVENT16# -> ODD_DA, ODD device attention, +// low active, when it's low, BIOS will enbale ODD_PWR +#define GPIO_113_SELECT FUNCTION2 // USB_OC5#/IR_TX0/GEVENT17# -> use TWARN mapping to trigger GEVENT17# +#define GPIO_114_SELECT FUNCTION2 // BLINK/USB_OC7#/GEVENT18# -> BLINK +#define GPIO_115_SELECT FUNCTION0 // SYS_RESET#/GEVENT19# -> SYS_RST# +#define GPIO_116_SELECT FUNCTION0 // R_RX1/GEVENT20# -> IR INPUT +#define GPIO_117_SELECT FUNCTION1+NonGpio // SPI_CS3#/GBE_STAT1/GEVENT21# -> GBE_STAT1 +#define GPIO_118_SELECT FUNCTION1 // RI#/GEVENT22# -> LID_CLOSED# +#define GPIO_119_SELECT FUNCTION0 // LPC_SMI#/GEVENT23# -> EC_SMI +#define GPIO_120_SELECT FUNCTION0+NonGpio +#define GPIO_121_SELECT FUNCTION0+NonGpio +#define GPIO_122_SELECT FUNCTION0+NonGpio +#define GPIO_123_SELECT FUNCTION0+NonGpio +#define GPIO_124_SELECT FUNCTION0+NonGpio +#define GPIO_125_SELECT FUNCTION0+NonGpio +#define GPIO_126_SELECT FUNCTION0+NonGpio +#define GPIO_127_SELECT FUNCTION0+NonGpio +#define GPIO_128_SELECT FUNCTION0+NonGpio +#define GPIO_129_SELECT FUNCTION0+NonGpio +#define GPIO_130_SELECT FUNCTION0+NonGpio +#define GPIO_131_SELECT FUNCTION0+NonGpio +#define GPIO_132_SELECT FUNCTION0+NonGpio +#define GPIO_133_SELECT FUNCTION0+NonGpio +#define GPIO_134_SELECT FUNCTION0+NonGpio +#define GPIO_135_SELECT FUNCTION0+NonGpio +#define GPIO_136_SELECT FUNCTION0+NonGpio +#define GPIO_137_SELECT FUNCTION0+NonGpio +#define GPIO_138_SELECT FUNCTION0+NonGpio +#define GPIO_139_SELECT FUNCTION0+NonGpio +#define GPIO_140_SELECT FUNCTION0+NonGpio +#define GPIO_141_SELECT FUNCTION0+NonGpio +#define GPIO_142_SELECT FUNCTION0+NonGpio +#define GPIO_143_SELECT FUNCTION0+NonGpio +#define GPIO_144_SELECT FUNCTION0+NonGpio +#define GPIO_145_SELECT FUNCTION0+NonGpio +#define GPIO_146_SELECT FUNCTION0+NonGpio +#define GPIO_147_SELECT FUNCTION0+NonGpio +#define GPIO_148_SELECT FUNCTION0+NonGpio +#define GPIO_149_SELECT FUNCTION0+NonGpio +#define GPIO_150_SELECT FUNCTION0+NonGpio +#define GPIO_151_SELECT FUNCTION0+NonGpio +#define GPIO_152_SELECT FUNCTION0+NonGpio +#define GPIO_153_SELECT FUNCTION0+NonGpio +#define GPIO_154_SELECT FUNCTION0+NonGpio +#define GPIO_155_SELECT FUNCTION0+NonGpio +#define GPIO_156_SELECT FUNCTION0+NonGpio +#define GPIO_157_SELECT FUNCTION0+NonGpio +#define GPIO_158_SELECT FUNCTION0+NonGpio +#define GPIO_159_SELECT FUNCTION0+NonGpio +#define GPIO_160_SELECT FUNCTION0+NonGpio + +// S5-domain General Purpose I/O +#define GPIO_161_SELECT FUNCTION0+NonGpio // ROM_RST# +#define GPIO_162_SELECT FUNCTION0+NonGpio // SPI ROM +#define GPIO_163_SELECT FUNCTION0+NonGpio // SPI ROM +#define GPIO_164_SELECT FUNCTION0+NonGpio // SPI ROM +#define GPIO_165_SELECT FUNCTION0+NonGpio // SPI ROM +#define GPIO_166_SELECT FUNCTION1+NonGpio // GBE_STAT2 +#define GPIO_167_SELECT FUNCTION0+NonGpio // AZ_SDATA_IN0 +#define GPIO_168_SELECT FUNCTION0+NonGpio // AZ_SDATA_IN1 +#define GPIO_169_SELECT FUNCTION0+NonGpio // AZ_SDATA_IN2 +#define GPIO_170_SELECT FUNCTION1+NonGpio // gating the power control signal for ODD, see BIOS requirements doc for detail. +#define GPIO_171_SELECT FUNCTION0+NonGpio // TEMPIN0, +#define GPIO_172_SELECT FUNCTION1 // used as FCH_USB3.0PORT_EN# - 0:ENABLE; 1:DISABLE +#define GPIO_173_SELECT FUNCTION0+NonGpio // TEMPIN3 +#define GPIO_174_SELECT FUNCTION1+NonGpio // USED AS TALERT# +#define GPIO_175_SELECT FUNCTION1 // WLAN, WIRELESS DISABLE 1:DISABLE; 0:ENABLE +#define GPIO_176_SELECT FUNCTION1+NonGpio // WWAN, WIRELESS DISABLE 1:DISABLE; 0:ENABLE +#define GPIO_177_SELECT FUNCTION2+NonGpio // WUSB, WIRELESS DISABLE 1:DISABLE; 0:ENABLE +#define GPIO_178_SELECT FUNCTION2 // MEM_1V5 +#define GPIO_179_SELECT FUNCTION2 // MEM_1V35 +#define GPIO_180_SELECT FUNCTION0+NonGpio // Use as VIN VDDIO +#define GPIO_181_SELECT FUNCTION0+NonGpio // Use as VIN VDDR +#define GPIO_182_SELECT FUNCTION1+NonGpio // GBE_LED3 +#define GPIO_183_SELECT FUNCTION0+NonGpio // GBE_LED0 +#define GPIO_184_SELECT FUNCTION1+NonGpio // USED AS LLB# +#define GPIO_185_SELECT FUNCTION0+NonGpio // USED AS USB +#define GPIO_186_SELECT FUNCTION0+NonGpio // USED AS USB +#define GPIO_187_SELECT FUNCTION2 // USED AS AC LED INDICATOR, LOW ACTIVE +#define GPIO_188_SELECT FUNCTION2 // default used AS BATT LED INDICATOR, LOW ACTIVE +// option for HDMI CEC signal OW ACTIVE +#define GPIO_189_SELECT FUNCTION1 // USED AS AC_OK RECIEVER, INPUT, low active +#define GPIO_190_SELECT FUNCTION1 // USED TO MONITER INTERUPT FROM BATT CHARGER, INPUT +#define GPIO_191_SELECT FUNCTION0+NonGpio // TOUCH PAD, DATA +#define GPIO_192_SELECT FUNCTION0+NonGpio // TOUCH PAD, CLK +#define GPIO_193_SELECT FUNCTION0+NonGpio // SMBUS CLK, +#define GPIO_194_SELECT FUNCTION0+NonGpio // SMBUS, DATA +#define GPIO_195_SELECT FUNCTION0+NonGpio // SMBUS CLK, +#define GPIO_196_SELECT FUNCTION0+NonGpio // SMBUS, DATA +#define GPIO_197_SELECT FUNCTION2+NonGpio // Default GPIO for LOM_POWER, high active +// RESERVED FOR LCD BACKLIGHT PWM +#define GPIO_198_SELECT FUNCTION0+NonGpio // IMC SCROLL LED CONTROL +#define GPIO_199_SELECT FUNCTION3 // STRAP TO SELECT BOOT ROM - H:LPC ROM L: SPI ROM +#define GPIO_200_SELECT FUNCTION2 // NEC USB3.0 POWER CONTROL 1:ON(DEFAULT); 0:OFF +#define GPIO_201_SELECT FUNCTION0+NonGpio // KSI +#define GPIO_202_SELECT FUNCTION0+NonGpio // KSI +#define GPIO_203_SELECT FUNCTION0+NonGpio // KSI +#define GPIO_204_SELECT FUNCTION0+NonGpio // KSI +#define GPIO_205_SELECT FUNCTION0+NonGpio // KSI +#define GPIO_206_SELECT FUNCTION0+NonGpio // KSI +#define GPIO_207_SELECT FUNCTION0+NonGpio // KSI +#define GPIO_208_SELECT FUNCTION0+NonGpio // KSI +#define GPIO_209_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_210_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_211_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_212_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_213_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_214_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_215_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_216_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_217_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_218_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_219_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_220_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_221_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_222_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_223_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_224_SELECT FUNCTION0+NonGpio // KSO +#define GPIO_225_SELECT FUNCTION2+NonGpio // KSO +#define GPIO_226_SELECT FUNCTION2+NonGpio // KSO +#define GPIO_227_SELECT FUNCTION0+NonGpio // SMBUS CLK, +#define GPIO_228_SELECT FUNCTION0+NonGpio // SMBUS, DATA +#define GPIO_229_SELECT FUNCTION0+NonGpio // DP1_HPD + +#define TYPE_GPI (1<<5) +#define TYPE_GPO (0<<5) + +#define GPIO_00_TYPE TYPE_GPO +#define GPIO_01_TYPE TYPE_GPO +#define GPIO_02_TYPE TYPE_GPO +#define GPIO_03_TYPE TYPE_GPO +#define GPIO_04_TYPE TYPE_GPO +#define GPIO_05_TYPE TYPE_GPO +#define GPIO_06_TYPE TYPE_GPO +#define GPIO_07_TYPE TYPE_GPO +#define GPIO_08_TYPE TYPE_GPO +#define GPIO_09_TYPE TYPE_GPI +#define GPIO_10_TYPE TYPE_GPI +#define GPIO_11_TYPE TYPE_GPO +#define GPIO_12_TYPE TYPE_GPO +#define GPIO_13_TYPE TYPE_GPO +#define GPIO_14_TYPE TYPE_GPO +#define GPIO_15_TYPE TYPE_GPO +#define GPIO_16_TYPE TYPE_GPO +#define GPIO_17_TYPE TYPE_GPO +#define GPIO_18_TYPE TYPE_GPO +#define GPIO_19_TYPE TYPE_GPO +#define GPIO_20_TYPE TYPE_GPO +#define GPIO_21_TYPE TYPE_GPO +#define GPIO_22_TYPE TYPE_GPO +#define GPIO_23_TYPE TYPE_GPO +#define GPIO_24_TYPE TYPE_GPO +#define GPIO_25_TYPE TYPE_GPO +#define GPIO_26_TYPE TYPE_GPO +#define GPIO_27_TYPE TYPE_GPO +#define GPIO_28_TYPE TYPE_GPI +#define GPIO_29_TYPE TYPE_GPO +#define GPIO_30_TYPE TYPE_GPI +#define GPIO_31_TYPE TYPE_GPI +#define GPIO_32_TYPE TYPE_GPO +#define GPIO_33_TYPE TYPE_GPI +#define GPIO_34_TYPE TYPE_GPO +#define GPIO_35_TYPE TYPE_GPO +#define GPIO_36_TYPE TYPE_GPO +#define GPIO_37_TYPE TYPE_GPO +#define GPIO_38_TYPE TYPE_GPO +#define GPIO_39_TYPE TYPE_GPO +#define GPIO_40_TYPE TYPE_GPO +#define GPIO_41_TYPE TYPE_GPI +#define GPIO_42_TYPE TYPE_GPI +#define GPIO_43_TYPE TYPE_GPO +#define GPIO_44_TYPE TYPE_GPO +#define GPIO_45_TYPE TYPE_GPO +#define GPIO_46_TYPE TYPE_GPI +#define GPIO_47_TYPE TYPE_GPO +#define GPIO_48_TYPE TYPE_GPO +#define GPIO_49_TYPE TYPE_GPO +#define GPIO_50_TYPE TYPE_GPO +#define GPIO_51_TYPE TYPE_GPO +#define GPIO_52_TYPE TYPE_GPO +#define GPIO_53_TYPE TYPE_GPO +#define GPIO_54_TYPE TYPE_GPO +#define GPIO_55_TYPE TYPE_GPO +#define GPIO_56_TYPE TYPE_GPI +#define GPIO_57_TYPE TYPE_GPO +#define GPIO_58_TYPE TYPE_GPO +#define GPIO_59_TYPE TYPE_GPO +#define GPIO_60_TYPE TYPE_GPI +#define GPIO_61_TYPE TYPE_GPI +#define GPIO_62_TYPE TYPE_GPI +#define GPIO_63_TYPE TYPE_GPI +#define GPIO_64_TYPE TYPE_GPI +#define GPIO_65_TYPE TYPE_GPI +#define GPIO_66_TYPE TYPE_GPO +#define GPIO_67_TYPE TYPE_GPO +#define GPIO_68_TYPE TYPE_GPO +#define GPIO_69_TYPE TYPE_GPO +#define GPIO_70_TYPE TYPE_GPO +#define GPIO_71_TYPE TYPE_GPO +#define GPIO_72_TYPE TYPE_GPO +#define GPIO_73_TYPE TYPE_GPO +#define GPIO_74_TYPE TYPE_GPO +#define GPIO_75_TYPE TYPE_GPO +#define GPIO_76_TYPE TYPE_GPO +#define GPIO_77_TYPE TYPE_GPO +#define GPIO_78_TYPE TYPE_GPO +#define GPIO_79_TYPE TYPE_GPO +#define GPIO_80_TYPE TYPE_GPO +#define GPIO_81_TYPE TYPE_GPO +#define GPIO_82_TYPE TYPE_GPO +#define GPIO_83_TYPE TYPE_GPO +#define GPIO_84_TYPE TYPE_GPO +#define GPIO_85_TYPE TYPE_GPO +#define GPIO_86_TYPE TYPE_GPO +#define GPIO_87_TYPE TYPE_GPO +#define GPIO_88_TYPE TYPE_GPO +#define GPIO_89_TYPE TYPE_GPO +#define GPIO_90_TYPE TYPE_GPO +#define GPIO_91_TYPE TYPE_GPO +#define GPIO_92_TYPE TYPE_GPO +#define GPIO_93_TYPE TYPE_GPO +#define GPIO_94_TYPE TYPE_GPO +#define GPIO_95_TYPE TYPE_GPO + +// GEVENT 00 ~ 23 are mapped to GPIO 96 ~ 119 +#define GPIO_96_TYPE TYPE_GPI +#define GPIO_97_TYPE TYPE_GPI +#define GPIO_98_TYPE TYPE_GPI +#define GPIO_99_TYPE TYPE_GPI +#define GPIO_100_TYPE TYPE_GPI +#define GPIO_101_TYPE TYPE_GPI +#define GPIO_102_TYPE TYPE_GPO +#define GPIO_103_TYPE TYPE_GPO +#define GPIO_104_TYPE TYPE_GPI +#define GPIO_105_TYPE TYPE_GPI +#define GPIO_106_TYPE TYPE_GPO +#define GPIO_107_TYPE TYPE_GPI +#define GPIO_108_TYPE TYPE_GPI +#define GPIO_109_TYPE TYPE_GPI +#define GPIO_110_TYPE TYPE_GPI +#define GPIO_111_TYPE TYPE_GPI +#define GPIO_112_TYPE TYPE_GPI +#define GPIO_113_TYPE TYPE_GPI +#define GPIO_114_TYPE TYPE_GPO +#define GPIO_115_TYPE TYPE_GPI +#define GPIO_116_TYPE TYPE_GPI +#define GPIO_117_TYPE TYPE_GPI +#define GPIO_118_TYPE TYPE_GPI +#define GPIO_119_TYPE TYPE_GPI + +#define GPIO_120_TYPE TYPE_GPO +#define GPIO_121_TYPE TYPE_GPO +#define GPIO_122_TYPE TYPE_GPO +#define GPIO_123_TYPE TYPE_GPO +#define GPIO_124_TYPE TYPE_GPO +#define GPIO_125_TYPE TYPE_GPO +#define GPIO_126_TYPE TYPE_GPO +#define GPIO_127_TYPE TYPE_GPO +#define GPIO_128_TYPE TYPE_GPO +#define GPIO_129_TYPE TYPE_GPO +#define GPIO_130_TYPE TYPE_GPO +#define GPIO_131_TYPE TYPE_GPO +#define GPIO_132_TYPE TYPE_GPO +#define GPIO_133_TYPE TYPE_GPO +#define GPIO_134_TYPE TYPE_GPO +#define GPIO_135_TYPE TYPE_GPO +#define GPIO_136_TYPE TYPE_GPO +#define GPIO_137_TYPE TYPE_GPO +#define GPIO_138_TYPE TYPE_GPO +#define GPIO_139_TYPE TYPE_GPO +#define GPIO_140_TYPE TYPE_GPO +#define GPIO_141_TYPE TYPE_GPO +#define GPIO_142_TYPE TYPE_GPO +#define GPIO_143_TYPE TYPE_GPO +#define GPIO_144_TYPE TYPE_GPO +#define GPIO_145_TYPE TYPE_GPO +#define GPIO_146_TYPE TYPE_GPO +#define GPIO_147_TYPE TYPE_GPO +#define GPIO_148_TYPE TYPE_GPO +#define GPIO_149_TYPE TYPE_GPO +#define GPIO_150_TYPE TYPE_GPO +#define GPIO_151_TYPE TYPE_GPO +#define GPIO_152_TYPE TYPE_GPO +#define GPIO_153_TYPE TYPE_GPO +#define GPIO_154_TYPE TYPE_GPO +#define GPIO_155_TYPE TYPE_GPO +#define GPIO_156_TYPE TYPE_GPO +#define GPIO_157_TYPE TYPE_GPO +#define GPIO_158_TYPE TYPE_GPO +#define GPIO_159_TYPE TYPE_GPO +#define GPIO_160_TYPE TYPE_GPO +#define GPIO_161_TYPE TYPE_GPO +#define GPIO_162_TYPE TYPE_GPO +#define GPIO_163_TYPE TYPE_GPO +#define GPIO_164_TYPE TYPE_GPI +#define GPIO_165_TYPE TYPE_GPO +#define GPIO_166_TYPE TYPE_GPI +#define GPIO_167_TYPE TYPE_GPI +#define GPIO_168_TYPE TYPE_GPI +#define GPIO_169_TYPE TYPE_GPI +#define GPIO_170_TYPE TYPE_GPO +#define GPIO_171_TYPE TYPE_GPI +#define GPIO_172_TYPE TYPE_GPO +#define GPIO_173_TYPE TYPE_GPI +#define GPIO_174_TYPE TYPE_GPI +#define GPIO_175_TYPE TYPE_GPO +#define GPIO_176_TYPE TYPE_GPO +#define GPIO_177_TYPE TYPE_GPO +#define GPIO_178_TYPE TYPE_GPO +#define GPIO_179_TYPE TYPE_GPO +#define GPIO_180_TYPE TYPE_GPO +#define GPIO_181_TYPE TYPE_GPO +#define GPIO_182_TYPE TYPE_GPO +#define GPIO_183_TYPE TYPE_GPO +#define GPIO_184_TYPE TYPE_GPI +#define GPIO_185_TYPE TYPE_GPO +#define GPIO_186_TYPE TYPE_GPO +#define GPIO_187_TYPE TYPE_GPO +#define GPIO_188_TYPE TYPE_GPO +#define GPIO_189_TYPE TYPE_GPI +#define GPIO_190_TYPE TYPE_GPI +#define GPIO_191_TYPE TYPE_GPO +#define GPIO_192_TYPE TYPE_GPO +#define GPIO_193_TYPE TYPE_GPO +#define GPIO_194_TYPE TYPE_GPO +#define GPIO_195_TYPE TYPE_GPO +#define GPIO_196_TYPE TYPE_GPO +#define GPIO_197_TYPE TYPE_GPO +#define GPIO_198_TYPE TYPE_GPO +#define GPIO_199_TYPE TYPE_GPI +#define GPIO_200_TYPE TYPE_GPO +#define GPIO_201_TYPE TYPE_GPI +#define GPIO_202_TYPE TYPE_GPI +#define GPIO_203_TYPE TYPE_GPI +#define GPIO_204_TYPE TYPE_GPI +#define GPIO_205_TYPE TYPE_GPI +#define GPIO_206_TYPE TYPE_GPI +#define GPIO_207_TYPE TYPE_GPI +#define GPIO_208_TYPE TYPE_GPI +#define GPIO_209_TYPE TYPE_GPO +#define GPIO_210_TYPE TYPE_GPO +#define GPIO_211_TYPE TYPE_GPO +#define GPIO_212_TYPE TYPE_GPO +#define GPIO_213_TYPE TYPE_GPO +#define GPIO_214_TYPE TYPE_GPO +#define GPIO_215_TYPE TYPE_GPO +#define GPIO_216_TYPE TYPE_GPO +#define GPIO_217_TYPE TYPE_GPO +#define GPIO_218_TYPE TYPE_GPO +#define GPIO_219_TYPE TYPE_GPO +#define GPIO_220_TYPE TYPE_GPO +#define GPIO_221_TYPE TYPE_GPO +#define GPIO_222_TYPE TYPE_GPO +#define GPIO_223_TYPE TYPE_GPO +#define GPIO_224_TYPE TYPE_GPO +#define GPIO_225_TYPE TYPE_GPO +#define GPIO_226_TYPE TYPE_GPO +#define GPIO_227_TYPE TYPE_GPO +#define GPIO_228_TYPE TYPE_GPO +#define GPIO_229_TYPE TYPE_GPO + +#define GPO_LOW (0<<6) +#define GPO_HI (1<<6) + +#define GPO_00_LEVEL GPO_HI +#define GPO_01_LEVEL GPO_HI +#define GPO_02_LEVEL GPO_HI +#define GPO_03_LEVEL GPO_HI +#define GPO_04_LEVEL GPO_HI +#define GPO_05_LEVEL GPO_HI +#define GPO_06_LEVEL GPO_HI +#define GPO_07_LEVEL GPO_HI +#define GPO_08_LEVEL GPO_HI +#define GPO_09_LEVEL GPO_LOW +#define GPO_10_LEVEL GPO_LOW +#define GPO_11_LEVEL GPO_HI +#define GPO_12_LEVEL GPO_HI +#define GPO_13_LEVEL GPO_HI +#define GPO_14_LEVEL GPO_HI +#define GPO_15_LEVEL GPO_HI +#define GPO_16_LEVEL GPO_HI +#define GPO_17_LEVEL GPO_HI +#define GPO_18_LEVEL GPO_HI +#define GPO_19_LEVEL GPO_LOW +#define GPO_20_LEVEL GPO_LOW +#define GPO_21_LEVEL GPO_LOW +#define GPO_22_LEVEL GPO_HI +#define GPO_23_LEVEL GPO_HI +#define GPO_24_LEVEL GPO_HI +#define GPO_25_LEVEL GPO_HI +#define GPO_26_LEVEL GPO_HI +#define GPO_27_LEVEL GPO_HI +#define GPO_28_LEVEL GPO_LOW +#define GPO_29_LEVEL GPO_HI +#define GPO_30_LEVEL GPO_LOW +#define GPO_31_LEVEL GPO_LOW +#define GPO_32_LEVEL GPO_HI +#define GPO_33_LEVEL GPO_LOW +#define GPO_34_LEVEL GPO_LOW +#define GPO_35_LEVEL GPO_LOW +#define GPO_36_LEVEL GPO_LOW +#define GPO_37_LEVEL GPO_HI +#define GPO_38_LEVEL GPO_HI +#define GPO_39_LEVEL GPO_HI +#define GPO_40_LEVEL GPO_LOW +#define GPO_41_LEVEL GPO_LOW +#define GPO_42_LEVEL GPO_LOW +#define GPO_43_LEVEL GPO_LOW +#define GPO_44_LEVEL GPO_HI +#define GPO_45_LEVEL GPO_HI +#define GPO_46_LEVEL GPO_LOW +#define GPO_47_LEVEL GPO_LOW +#define GPO_48_LEVEL GPO_LOW +#define GPO_49_LEVEL GPO_HI +#define GPO_50_LEVEL GPO_HI +#define GPO_51_LEVEL GPO_LOW +#define GPO_52_LEVEL GPO_HI +#define GPO_53_LEVEL GPO_HI +#define GPO_54_LEVEL GPO_LOW +#define GPO_55_LEVEL GPO_LOW +#define GPO_56_LEVEL GPO_LOW +#define GPO_57_LEVEL GPO_HI +#define GPO_58_LEVEL GPO_HI +#define GPO_59_LEVEL GPO_HI +#define GPO_60_LEVEL GPO_LOW +#define GPO_61_LEVEL GPO_LOW +#define GPO_62_LEVEL GPO_LOW +#define GPO_63_LEVEL GPO_LOW +#define GPO_64_LEVEL GPO_LOW +#define GPO_65_LEVEL GPO_LOW +#define GPO_66_LEVEL GPO_LOW +#define GPO_67_LEVEL GPO_LOW +#define GPO_68_LEVEL GPO_LOW +#define GPO_69_LEVEL GPO_LOW +#define GPO_70_LEVEL GPO_LOW +#define GPO_71_LEVEL GPO_LOW +#define GPO_72_LEVEL GPO_LOW +#define GPO_73_LEVEL GPO_LOW +#define GPO_74_LEVEL GPO_LOW +#define GPO_75_LEVEL GPO_LOW +#define GPO_76_LEVEL GPO_LOW +#define GPO_77_LEVEL GPO_LOW +#define GPO_78_LEVEL GPO_LOW +#define GPO_79_LEVEL GPO_LOW +#define GPO_80_LEVEL GPO_LOW +#define GPO_81_LEVEL GPO_LOW +#define GPO_82_LEVEL GPO_LOW +#define GPO_83_LEVEL GPO_LOW +#define GPO_84_LEVEL GPO_LOW +#define GPO_85_LEVEL GPO_LOW +#define GPO_86_LEVEL GPO_LOW +#define GPO_87_LEVEL GPO_LOW +#define GPO_88_LEVEL GPO_LOW +#define GPO_89_LEVEL GPO_LOW +#define GPO_90_LEVEL GPO_LOW +#define GPO_91_LEVEL GPO_LOW +#define GPO_92_LEVEL GPO_LOW +#define GPO_93_LEVEL GPO_LOW +#define GPO_94_LEVEL GPO_LOW +#define GPO_95_LEVEL GPO_LOW +#define GPO_96_LEVEL GPO_LOW +#define GPO_97_LEVEL GPO_LOW +#define GPO_98_LEVEL GPO_LOW +#define GPO_99_LEVEL GPO_LOW +#define GPO_100_LEVEL GPO_LOW +#define GPO_101_LEVEL GPO_LOW +#define GPO_102_LEVEL GPO_LOW +#define GPO_103_LEVEL GPO_LOW +#define GPO_104_LEVEL GPO_LOW +#define GPO_105_LEVEL GPO_LOW +#define GPO_106_LEVEL GPO_LOW +#define GPO_107_LEVEL GPO_LOW +#define GPO_108_LEVEL GPO_HI +#define GPO_109_LEVEL GPO_LOW +#define GPO_110_LEVEL GPO_HI +#define GPO_111_LEVEL GPO_HI +#define GPO_112_LEVEL GPO_HI +#define GPO_113_LEVEL GPO_LOW +#define GPO_114_LEVEL GPO_LOW +#define GPO_115_LEVEL GPO_LOW +#define GPO_116_LEVEL GPO_LOW +#define GPO_117_LEVEL GPO_LOW +#define GPO_118_LEVEL GPO_LOW +#define GPO_119_LEVEL GPO_LOW +#define GPO_120_LEVEL GPO_LOW +#define GPO_121_LEVEL GPO_LOW +#define GPO_122_LEVEL GPO_LOW +#define GPO_123_LEVEL GPO_LOW +#define GPO_124_LEVEL GPO_LOW +#define GPO_125_LEVEL GPO_LOW +#define GPO_126_LEVEL GPO_LOW +#define GPO_127_LEVEL GPO_LOW +#define GPO_128_LEVEL GPO_LOW +#define GPO_129_LEVEL GPO_LOW +#define GPO_130_LEVEL GPO_LOW +#define GPO_131_LEVEL GPO_LOW +#define GPO_132_LEVEL GPO_LOW +#define GPO_133_LEVEL GPO_LOW +#define GPO_134_LEVEL GPO_LOW +#define GPO_135_LEVEL GPO_LOW +#define GPO_136_LEVEL GPO_LOW +#define GPO_137_LEVEL GPO_LOW +#define GPO_138_LEVEL GPO_LOW +#define GPO_139_LEVEL GPO_LOW +#define GPO_140_LEVEL GPO_LOW +#define GPO_141_LEVEL GPO_LOW +#define GPO_142_LEVEL GPO_LOW +#define GPO_143_LEVEL GPO_LOW +#define GPO_144_LEVEL GPO_LOW +#define GPO_145_LEVEL GPO_LOW +#define GPO_146_LEVEL GPO_LOW +#define GPO_147_LEVEL GPO_LOW +#define GPO_148_LEVEL GPO_LOW +#define GPO_149_LEVEL GPO_LOW +#define GPO_150_LEVEL GPO_LOW +#define GPO_151_LEVEL GPO_LOW +#define GPO_152_LEVEL GPO_LOW +#define GPO_153_LEVEL GPO_LOW +#define GPO_154_LEVEL GPO_LOW +#define GPO_155_LEVEL GPO_LOW +#define GPO_156_LEVEL GPO_LOW +#define GPO_157_LEVEL GPO_LOW +#define GPO_158_LEVEL GPO_LOW +#define GPO_159_LEVEL GPO_LOW +#define GPO_160_LEVEL GPO_LOW +#define GPO_161_LEVEL GPO_LOW +#define GPO_162_LEVEL GPO_LOW +#define GPO_163_LEVEL GPO_LOW +#define GPO_164_LEVEL GPO_LOW +#define GPO_165_LEVEL GPO_LOW +#define GPO_166_LEVEL GPO_LOW +#define GPO_167_LEVEL GPO_LOW +#define GPO_168_LEVEL GPO_LOW +#define GPO_169_LEVEL GPO_LOW +#define GPO_170_LEVEL GPO_HI +#define GPO_171_LEVEL GPO_LOW +#define GPO_172_LEVEL GPO_HI // FCH_USB3.0PORT_EN# 0:ENABLE; 1:DISABLE +#define GPO_173_LEVEL GPO_LOW +#define GPO_174_LEVEL GPO_LOW +#define GPO_175_LEVEL GPO_LOW +#define GPO_176_LEVEL GPO_LOW +#define GPO_177_LEVEL GPO_LOW +#define GPO_178_LEVEL GPO_HI // AMD.SR BU to set VDDIO level to 1.5V for Barb BU +#define GPO_179_LEVEL GPO_HI +#define GPO_180_LEVEL GPO_HI +#define GPO_181_LEVEL GPO_LOW +#define GPO_182_LEVEL GPO_HI +#define GPO_183_LEVEL GPO_LOW +#define GPO_184_LEVEL GPO_LOW +#define GPO_185_LEVEL GPO_LOW +#define GPO_186_LEVEL GPO_LOW +#define GPO_187_LEVEL GPO_LOW +#define GPO_188_LEVEL GPO_LOW +#define GPO_189_LEVEL GPO_LOW +#define GPO_190_LEVEL GPO_LOW +#define GPO_191_LEVEL GPO_LOW +#define GPO_192_LEVEL GPO_LOW +#define GPO_193_LEVEL GPO_LOW +#define GPO_194_LEVEL GPO_LOW +#define GPO_195_LEVEL GPO_LOW +#define GPO_196_LEVEL GPO_LOW +#define GPO_197_LEVEL GPO_LOW +#define GPO_198_LEVEL GPO_LOW +#define GPO_199_LEVEL GPO_LOW +#define GPO_200_LEVEL GPO_HI +#define GPO_201_LEVEL GPO_LOW +#define GPO_202_LEVEL GPO_LOW +#define GPO_203_LEVEL GPO_LOW +#define GPO_204_LEVEL GPO_LOW +#define GPO_205_LEVEL GPO_LOW +#define GPO_206_LEVEL GPO_LOW +#define GPO_207_LEVEL GPO_LOW +#define GPO_208_LEVEL GPO_LOW +#define GPO_209_LEVEL GPO_LOW +#define GPO_210_LEVEL GPO_LOW +#define GPO_211_LEVEL GPO_LOW +#define GPO_212_LEVEL GPO_LOW +#define GPO_213_LEVEL GPO_LOW +#define GPO_214_LEVEL GPO_LOW +#define GPO_215_LEVEL GPO_LOW +#define GPO_216_LEVEL GPO_LOW +#define GPO_217_LEVEL GPO_LOW +#define GPO_218_LEVEL GPO_LOW +#define GPO_219_LEVEL GPO_LOW +#define GPO_220_LEVEL GPO_LOW +#define GPO_221_LEVEL GPO_LOW +#define GPO_222_LEVEL GPO_LOW +#define GPO_223_LEVEL GPO_LOW +#define GPO_224_LEVEL GPO_LOW +#define GPO_225_LEVEL GPO_LOW +#define GPO_226_LEVEL GPO_LOW +#define GPO_227_LEVEL GPO_LOW +#define GPO_228_LEVEL GPO_LOW +#define GPO_229_LEVEL GPO_LOW + +#define GPIO_NONSTICKY (0<<2) +#define GPIO_STICKY (1<<2) + +#define GPIO_00_STICKY GPIO_NONSTICKY +#define GPIO_01_STICKY GPIO_NONSTICKY +#define GPIO_02_STICKY GPIO_NONSTICKY +#define GPIO_03_STICKY GPIO_NONSTICKY +#define GPIO_04_STICKY GPIO_NONSTICKY +#define GPIO_05_STICKY GPIO_NONSTICKY +#define GPIO_06_STICKY GPIO_NONSTICKY +#define GPIO_07_STICKY GPIO_NONSTICKY +#define GPIO_08_STICKY GPIO_NONSTICKY +#define GPIO_09_STICKY GPIO_NONSTICKY +#define GPIO_10_STICKY GPIO_NONSTICKY +#define GPIO_11_STICKY GPIO_NONSTICKY +#define GPIO_12_STICKY GPIO_NONSTICKY +#define GPIO_13_STICKY GPIO_NONSTICKY +#define GPIO_14_STICKY GPIO_NONSTICKY +#define GPIO_15_STICKY GPIO_NONSTICKY +#define GPIO_16_STICKY GPIO_NONSTICKY +#define GPIO_17_STICKY GPIO_STICKY +#define GPIO_18_STICKY GPIO_NONSTICKY +#define GPIO_19_STICKY GPIO_NONSTICKY +#define GPIO_20_STICKY GPIO_NONSTICKY +#define GPIO_21_STICKY GPIO_NONSTICKY +#define GPIO_22_STICKY GPIO_NONSTICKY +#define GPIO_23_STICKY GPIO_NONSTICKY +#define GPIO_24_STICKY GPIO_NONSTICKY +#define GPIO_25_STICKY GPIO_NONSTICKY +#define GPIO_26_STICKY GPIO_NONSTICKY +#define GPIO_27_STICKY GPIO_NONSTICKY +#define GPIO_28_STICKY GPIO_NONSTICKY +#define GPIO_29_STICKY GPIO_NONSTICKY +#define GPIO_30_STICKY GPIO_NONSTICKY +#define GPIO_31_STICKY GPIO_NONSTICKY +#define GPIO_32_STICKY GPIO_NONSTICKY +#define GPIO_33_STICKY GPIO_NONSTICKY +#define GPIO_34_STICKY GPIO_NONSTICKY +#define GPIO_35_STICKY GPIO_NONSTICKY +#define GPIO_36_STICKY GPIO_NONSTICKY +#define GPIO_37_STICKY GPIO_NONSTICKY +#define GPIO_38_STICKY GPIO_NONSTICKY +#define GPIO_39_STICKY GPIO_NONSTICKY +#define GPIO_40_STICKY GPIO_NONSTICKY +#define GPIO_41_STICKY GPIO_NONSTICKY +#define GPIO_42_STICKY GPIO_NONSTICKY +#define GPIO_43_STICKY GPIO_NONSTICKY +#define GPIO_44_STICKY GPIO_NONSTICKY +#define GPIO_45_STICKY GPIO_NONSTICKY +#define GPIO_46_STICKY GPIO_NONSTICKY +#define GPIO_47_STICKY GPIO_NONSTICKY +#define GPIO_48_STICKY GPIO_NONSTICKY +#define GPIO_49_STICKY GPIO_NONSTICKY +#define GPIO_50_STICKY GPIO_NONSTICKY +#define GPIO_51_STICKY GPIO_NONSTICKY +#define GPIO_52_STICKY GPIO_NONSTICKY +#define GPIO_53_STICKY GPIO_NONSTICKY +#define GPIO_54_STICKY GPIO_NONSTICKY +#define GPIO_55_STICKY GPIO_NONSTICKY +#define GPIO_56_STICKY GPIO_NONSTICKY +#define GPIO_57_STICKY GPIO_NONSTICKY +#define GPIO_58_STICKY GPIO_NONSTICKY +#define GPIO_59_STICKY GPIO_NONSTICKY +#define GPIO_60_STICKY GPIO_NONSTICKY +#define GPIO_61_STICKY GPIO_NONSTICKY +#define GPIO_62_STICKY GPIO_NONSTICKY +#define GPIO_63_STICKY GPIO_NONSTICKY +#define GPIO_64_STICKY GPIO_NONSTICKY +#define GPIO_65_STICKY GPIO_NONSTICKY +#define GPIO_66_STICKY GPIO_NONSTICKY +#define GPIO_67_STICKY GPIO_NONSTICKY +#define GPIO_68_STICKY GPIO_NONSTICKY +#define GPIO_69_STICKY GPIO_NONSTICKY +#define GPIO_70_STICKY GPIO_NONSTICKY +#define GPIO_71_STICKY GPIO_NONSTICKY +#define GPIO_72_STICKY GPIO_NONSTICKY +#define GPIO_73_STICKY GPIO_NONSTICKY +#define GPIO_74_STICKY GPIO_NONSTICKY +#define GPIO_75_STICKY GPIO_NONSTICKY +#define GPIO_76_STICKY GPIO_NONSTICKY +#define GPIO_77_STICKY GPIO_NONSTICKY +#define GPIO_78_STICKY GPIO_NONSTICKY +#define GPIO_79_STICKY GPIO_NONSTICKY +#define GPIO_80_STICKY GPIO_NONSTICKY +#define GPIO_81_STICKY GPIO_NONSTICKY +#define GPIO_82_STICKY GPIO_NONSTICKY +#define GPIO_83_STICKY GPIO_NONSTICKY +#define GPIO_84_STICKY GPIO_NONSTICKY +#define GPIO_85_STICKY GPIO_NONSTICKY +#define GPIO_86_STICKY GPIO_NONSTICKY +#define GPIO_87_STICKY GPIO_NONSTICKY +#define GPIO_88_STICKY GPIO_NONSTICKY +#define GPIO_89_STICKY GPIO_NONSTICKY +#define GPIO_90_STICKY GPIO_NONSTICKY +#define GPIO_91_STICKY GPIO_NONSTICKY +#define GPIO_92_STICKY GPIO_NONSTICKY +#define GPIO_93_STICKY GPIO_NONSTICKY +#define GPIO_94_STICKY GPIO_NONSTICKY +#define GPIO_95_STICKY GPIO_NONSTICKY +#define GPIO_96_STICKY GPIO_NONSTICKY +#define GPIO_97_STICKY GPIO_NONSTICKY +#define GPIO_98_STICKY GPIO_NONSTICKY +#define GPIO_99_STICKY GPIO_NONSTICKY +#define GPIO_100_STICKY GPIO_NONSTICKY +#define GPIO_101_STICKY GPIO_NONSTICKY +#define GPIO_102_STICKY GPIO_STICKY +#define GPIO_103_STICKY GPIO_STICKY +#define GPIO_104_STICKY GPIO_NONSTICKY +#define GPIO_105_STICKY GPIO_NONSTICKY +#define GPIO_106_STICKY GPIO_NONSTICKY +#define GPIO_107_STICKY GPIO_NONSTICKY +#define GPIO_108_STICKY GPIO_STICKY +#define GPIO_109_STICKY GPIO_NONSTICKY +#define GPIO_110_STICKY GPIO_NONSTICKY +#define GPIO_111_STICKY GPIO_NONSTICKY +#define GPIO_112_STICKY GPIO_NONSTICKY +#define GPIO_113_STICKY GPIO_NONSTICKY +#define GPIO_114_STICKY GPIO_NONSTICKY +#define GPIO_115_STICKY GPIO_NONSTICKY +#define GPIO_116_STICKY GPIO_NONSTICKY +#define GPIO_117_STICKY GPIO_NONSTICKY +#define GPIO_118_STICKY GPIO_NONSTICKY +#define GPIO_119_STICKY GPIO_NONSTICKY +#define GPIO_120_STICKY GPIO_NONSTICKY +#define GPIO_121_STICKY GPIO_NONSTICKY +#define GPIO_122_STICKY GPIO_NONSTICKY +#define GPIO_123_STICKY GPIO_NONSTICKY +#define GPIO_124_STICKY GPIO_NONSTICKY +#define GPIO_125_STICKY GPIO_NONSTICKY +#define GPIO_126_STICKY GPIO_NONSTICKY +#define GPIO_127_STICKY GPIO_NONSTICKY +#define GPIO_128_STICKY GPIO_NONSTICKY +#define GPIO_129_STICKY GPIO_NONSTICKY +#define GPIO_130_STICKY GPIO_NONSTICKY +#define GPIO_131_STICKY GPIO_NONSTICKY +#define GPIO_132_STICKY GPIO_NONSTICKY +#define GPIO_133_STICKY GPIO_NONSTICKY +#define GPIO_134_STICKY GPIO_NONSTICKY +#define GPIO_135_STICKY GPIO_NONSTICKY +#define GPIO_136_STICKY GPIO_NONSTICKY +#define GPIO_137_STICKY GPIO_NONSTICKY +#define GPIO_138_STICKY GPIO_NONSTICKY +#define GPIO_139_STICKY GPIO_NONSTICKY +#define GPIO_140_STICKY GPIO_NONSTICKY +#define GPIO_141_STICKY GPIO_NONSTICKY +#define GPIO_142_STICKY GPIO_NONSTICKY +#define GPIO_143_STICKY GPIO_NONSTICKY +#define GPIO_144_STICKY GPIO_NONSTICKY +#define GPIO_145_STICKY GPIO_NONSTICKY +#define GPIO_146_STICKY GPIO_NONSTICKY +#define GPIO_147_STICKY GPIO_NONSTICKY +#define GPIO_148_STICKY GPIO_NONSTICKY +#define GPIO_149_STICKY GPIO_NONSTICKY +#define GPIO_150_STICKY GPIO_NONSTICKY +#define GPIO_151_STICKY GPIO_NONSTICKY +#define GPIO_152_STICKY GPIO_NONSTICKY +#define GPIO_153_STICKY GPIO_NONSTICKY +#define GPIO_154_STICKY GPIO_NONSTICKY +#define GPIO_155_STICKY GPIO_NONSTICKY +#define GPIO_156_STICKY GPIO_NONSTICKY +#define GPIO_157_STICKY GPIO_NONSTICKY +#define GPIO_158_STICKY GPIO_NONSTICKY +#define GPIO_159_STICKY GPIO_NONSTICKY +#define GPIO_160_STICKY GPIO_NONSTICKY +#define GPIO_161_STICKY GPIO_NONSTICKY +#define GPIO_162_STICKY GPIO_NONSTICKY +#define GPIO_163_STICKY GPIO_NONSTICKY +#define GPIO_164_STICKY GPIO_NONSTICKY +#define GPIO_165_STICKY GPIO_NONSTICKY +#define GPIO_166_STICKY GPIO_NONSTICKY +#define GPIO_167_STICKY GPIO_NONSTICKY +#define GPIO_168_STICKY GPIO_NONSTICKY +#define GPIO_169_STICKY GPIO_NONSTICKY +#define GPIO_170_STICKY GPIO_STICKY +#define GPIO_171_STICKY GPIO_NONSTICKY +#define GPIO_172_STICKY GPIO_STICKY +#define GPIO_173_STICKY GPIO_NONSTICKY +#define GPIO_174_STICKY GPIO_NONSTICKY +#define GPIO_175_STICKY GPIO_NONSTICKY +#define GPIO_176_STICKY GPIO_NONSTICKY +#define GPIO_177_STICKY GPIO_NONSTICKY +#define GPIO_178_STICKY GPIO_NONSTICKY +#define GPIO_179_STICKY GPIO_NONSTICKY +#define GPIO_180_STICKY GPIO_NONSTICKY +#define GPIO_181_STICKY GPIO_NONSTICKY +#define GPIO_182_STICKY GPIO_NONSTICKY +#define GPIO_183_STICKY GPIO_NONSTICKY +#define GPIO_184_STICKY GPIO_NONSTICKY +#define GPIO_185_STICKY GPIO_NONSTICKY +#define GPIO_186_STICKY GPIO_NONSTICKY +#define GPIO_187_STICKY GPIO_NONSTICKY +#define GPIO_188_STICKY GPIO_NONSTICKY +#define GPIO_189_STICKY GPIO_NONSTICKY +#define GPIO_190_STICKY GPIO_NONSTICKY +#define GPIO_191_STICKY GPIO_NONSTICKY +#define GPIO_192_STICKY GPIO_NONSTICKY +#define GPIO_193_STICKY GPIO_NONSTICKY +#define GPIO_194_STICKY GPIO_NONSTICKY +#define GPIO_195_STICKY GPIO_NONSTICKY +#define GPIO_196_STICKY GPIO_NONSTICKY +#define GPIO_197_STICKY GPIO_NONSTICKY +#define GPIO_198_STICKY GPIO_NONSTICKY +#define GPIO_199_STICKY GPIO_NONSTICKY +#define GPIO_200_STICKY GPIO_NONSTICKY +#define GPIO_201_STICKY GPIO_NONSTICKY +#define GPIO_202_STICKY GPIO_NONSTICKY +#define GPIO_203_STICKY GPIO_NONSTICKY +#define GPIO_204_STICKY GPIO_NONSTICKY +#define GPIO_205_STICKY GPIO_NONSTICKY +#define GPIO_206_STICKY GPIO_NONSTICKY +#define GPIO_207_STICKY GPIO_NONSTICKY +#define GPIO_208_STICKY GPIO_NONSTICKY +#define GPIO_209_STICKY GPIO_NONSTICKY +#define GPIO_210_STICKY GPIO_NONSTICKY +#define GPIO_211_STICKY GPIO_NONSTICKY +#define GPIO_212_STICKY GPIO_NONSTICKY +#define GPIO_213_STICKY GPIO_NONSTICKY +#define GPIO_214_STICKY GPIO_NONSTICKY +#define GPIO_215_STICKY GPIO_NONSTICKY +#define GPIO_216_STICKY GPIO_NONSTICKY +#define GPIO_217_STICKY GPIO_NONSTICKY +#define GPIO_218_STICKY GPIO_NONSTICKY +#define GPIO_219_STICKY GPIO_NONSTICKY +#define GPIO_220_STICKY GPIO_NONSTICKY +#define GPIO_221_STICKY GPIO_NONSTICKY +#define GPIO_222_STICKY GPIO_NONSTICKY +#define GPIO_223_STICKY GPIO_NONSTICKY +#define GPIO_224_STICKY GPIO_NONSTICKY +#define GPIO_225_STICKY GPIO_NONSTICKY +#define GPIO_226_STICKY GPIO_NONSTICKY +#define GPIO_227_STICKY GPIO_NONSTICKY +#define GPIO_228_STICKY GPIO_NONSTICKY +#define GPIO_229_STICKY GPIO_NONSTICKY + +#define PULLUP_ENABLE (0<<3) +#define PULLUP_DISABLE (1<<3) + +#define GPIO_00_PULLUP PULLUP_DISABLE +#define GPIO_01_PULLUP PULLUP_DISABLE +#define GPIO_02_PULLUP PULLUP_DISABLE +#define GPIO_03_PULLUP PULLUP_DISABLE +#define GPIO_04_PULLUP PULLUP_DISABLE +#define GPIO_05_PULLUP PULLUP_DISABLE +#define GPIO_06_PULLUP PULLUP_DISABLE +#define GPIO_07_PULLUP PULLUP_DISABLE +#define GPIO_08_PULLUP PULLUP_DISABLE +#define GPIO_09_PULLUP PULLUP_DISABLE +#define GPIO_10_PULLUP PULLUP_DISABLE +#define GPIO_11_PULLUP PULLUP_DISABLE +#define GPIO_12_PULLUP PULLUP_DISABLE +#define GPIO_13_PULLUP PULLUP_DISABLE +#define GPIO_14_PULLUP PULLUP_DISABLE +#define GPIO_15_PULLUP PULLUP_DISABLE +#define GPIO_16_PULLUP PULLUP_DISABLE +#define GPIO_17_PULLUP PULLUP_DISABLE +#define GPIO_18_PULLUP PULLUP_DISABLE +#define GPIO_19_PULLUP PULLUP_DISABLE +#define GPIO_20_PULLUP PULLUP_DISABLE +#define GPIO_21_PULLUP PULLUP_DISABLE +#define GPIO_22_PULLUP PULLUP_DISABLE +#define GPIO_23_PULLUP PULLUP_DISABLE +#define GPIO_24_PULLUP PULLUP_DISABLE +#define GPIO_25_PULLUP PULLUP_DISABLE +#define GPIO_26_PULLUP PULLUP_DISABLE +#define GPIO_27_PULLUP PULLUP_DISABLE +#define GPIO_28_PULLUP PULLUP_DISABLE +#define GPIO_29_PULLUP PULLUP_DISABLE +#define GPIO_30_PULLUP PULLUP_DISABLE +#define GPIO_31_PULLUP PULLUP_DISABLE +#define GPIO_32_PULLUP PULLUP_DISABLE +#define GPIO_33_PULLUP PULLUP_DISABLE +#define GPIO_34_PULLUP PULLUP_DISABLE +#define GPIO_35_PULLUP PULLUP_DISABLE +#define GPIO_36_PULLUP PULLUP_DISABLE +#define GPIO_37_PULLUP PULLUP_DISABLE +#define GPIO_38_PULLUP PULLUP_DISABLE +#define GPIO_39_PULLUP PULLUP_DISABLE +#define GPIO_40_PULLUP PULLUP_DISABLE +#define GPIO_41_PULLUP PULLUP_DISABLE +#define GPIO_42_PULLUP PULLUP_DISABLE +#define GPIO_43_PULLUP PULLUP_DISABLE +#define GPIO_44_PULLUP PULLUP_DISABLE +#define GPIO_45_PULLUP PULLUP_DISABLE +#define GPIO_46_PULLUP PULLUP_DISABLE +#define GPIO_47_PULLUP PULLUP_DISABLE +#define GPIO_48_PULLUP PULLUP_DISABLE +#define GPIO_49_PULLUP PULLUP_DISABLE +#define GPIO_50_PULLUP PULLUP_DISABLE +#define GPIO_51_PULLUP PULLUP_DISABLE +#define GPIO_52_PULLUP PULLUP_DISABLE +#define GPIO_53_PULLUP PULLUP_DISABLE +#define GPIO_54_PULLUP PULLUP_DISABLE +#define GPIO_55_PULLUP PULLUP_DISABLE +#define GPIO_56_PULLUP PULLUP_DISABLE +#define GPIO_57_PULLUP PULLUP_DISABLE +#define GPIO_58_PULLUP PULLUP_DISABLE +#define GPIO_59_PULLUP PULLUP_DISABLE +#define GPIO_60_PULLUP PULLUP_DISABLE +#define GPIO_61_PULLUP PULLUP_DISABLE +#define GPIO_62_PULLUP PULLUP_DISABLE +#define GPIO_63_PULLUP PULLUP_DISABLE +#define GPIO_64_PULLUP PULLUP_DISABLE +#define GPIO_65_PULLUP PULLUP_DISABLE +#define GPIO_66_PULLUP PULLUP_DISABLE +#define GPIO_67_PULLUP PULLUP_DISABLE +#define GPIO_68_PULLUP PULLUP_DISABLE +#define GPIO_69_PULLUP PULLUP_DISABLE +#define GPIO_70_PULLUP PULLUP_DISABLE +#define GPIO_71_PULLUP PULLUP_DISABLE +#define GPIO_72_PULLUP PULLUP_DISABLE +#define GPIO_73_PULLUP PULLUP_DISABLE +#define GPIO_74_PULLUP PULLUP_DISABLE +#define GPIO_75_PULLUP PULLUP_DISABLE +#define GPIO_76_PULLUP PULLUP_DISABLE +#define GPIO_77_PULLUP PULLUP_DISABLE +#define GPIO_78_PULLUP PULLUP_DISABLE +#define GPIO_79_PULLUP PULLUP_DISABLE +#define GPIO_80_PULLUP PULLUP_DISABLE +#define GPIO_80_PULLUP PULLUP_DISABLE +#define GPIO_81_PULLUP PULLUP_DISABLE +#define GPIO_82_PULLUP PULLUP_DISABLE +#define GPIO_83_PULLUP PULLUP_DISABLE +#define GPIO_84_PULLUP PULLUP_DISABLE +#define GPIO_85_PULLUP PULLUP_DISABLE +#define GPIO_86_PULLUP PULLUP_DISABLE +#define GPIO_87_PULLUP PULLUP_DISABLE +#define GPIO_88_PULLUP PULLUP_DISABLE +#define GPIO_89_PULLUP PULLUP_DISABLE +#define GPIO_90_PULLUP PULLUP_DISABLE +#define GPIO_91_PULLUP PULLUP_DISABLE +#define GPIO_92_PULLUP PULLUP_DISABLE +#define GPIO_93_PULLUP PULLUP_DISABLE +#define GPIO_94_PULLUP PULLUP_DISABLE +#define GPIO_95_PULLUP PULLUP_DISABLE +#define GPIO_96_PULLUP PULLUP_DISABLE +#define GPIO_97_PULLUP PULLUP_DISABLE +#define GPIO_98_PULLUP PULLUP_DISABLE +#define GPIO_99_PULLUP PULLUP_DISABLE +#define GPIO_100_PULLUP PULLUP_DISABLE +#define GPIO_101_PULLUP PULLUP_DISABLE +#define GPIO_102_PULLUP PULLUP_DISABLE +#define GPIO_103_PULLUP PULLUP_DISABLE +#define GPIO_104_PULLUP PULLUP_DISABLE +#define GPIO_105_PULLUP PULLUP_DISABLE +#define GPIO_106_PULLUP PULLUP_DISABLE +#define GPIO_107_PULLUP PULLUP_DISABLE +#define GPIO_108_PULLUP PULLUP_DISABLE +#define GPIO_109_PULLUP PULLUP_DISABLE +#define GPIO_110_PULLUP PULLUP_DISABLE +#define GPIO_111_PULLUP PULLUP_DISABLE +#define GPIO_112_PULLUP PULLUP_DISABLE +#define GPIO_113_PULLUP PULLUP_DISABLE +#define GPIO_114_PULLUP PULLUP_DISABLE +#define GPIO_115_PULLUP PULLUP_DISABLE +#define GPIO_116_PULLUP PULLUP_DISABLE +#define GPIO_117_PULLUP PULLUP_DISABLE +#define GPIO_118_PULLUP PULLUP_ENABLE +#define GPIO_119_PULLUP PULLUP_DISABLE +#define GPIO_120_PULLUP PULLUP_DISABLE +#define GPIO_121_PULLUP PULLUP_DISABLE +#define GPIO_122_PULLUP PULLUP_DISABLE +#define GPIO_123_PULLUP PULLUP_DISABLE +#define GPIO_124_PULLUP PULLUP_DISABLE +#define GPIO_125_PULLUP PULLUP_DISABLE +#define GPIO_126_PULLUP PULLUP_DISABLE +#define GPIO_127_PULLUP PULLUP_DISABLE +#define GPIO_128_PULLUP PULLUP_DISABLE +#define GPIO_129_PULLUP PULLUP_DISABLE +#define GPIO_130_PULLUP PULLUP_DISABLE +#define GPIO_131_PULLUP PULLUP_DISABLE +#define GPIO_132_PULLUP PULLUP_DISABLE +#define GPIO_133_PULLUP PULLUP_DISABLE +#define GPIO_134_PULLUP PULLUP_DISABLE +#define GPIO_135_PULLUP PULLUP_DISABLE +#define GPIO_136_PULLUP PULLUP_DISABLE +#define GPIO_137_PULLUP PULLUP_DISABLE +#define GPIO_138_PULLUP PULLUP_DISABLE +#define GPIO_139_PULLUP PULLUP_DISABLE +#define GPIO_140_PULLUP PULLUP_DISABLE +#define GPIO_141_PULLUP PULLUP_DISABLE +#define GPIO_142_PULLUP PULLUP_DISABLE +#define GPIO_143_PULLUP PULLUP_DISABLE +#define GPIO_144_PULLUP PULLUP_DISABLE +#define GPIO_145_PULLUP PULLUP_DISABLE +#define GPIO_146_PULLUP PULLUP_DISABLE +#define GPIO_147_PULLUP PULLUP_DISABLE +#define GPIO_148_PULLUP PULLUP_DISABLE +#define GPIO_149_PULLUP PULLUP_DISABLE +#define GPIO_150_PULLUP PULLUP_DISABLE +#define GPIO_151_PULLUP PULLUP_DISABLE +#define GPIO_152_PULLUP PULLUP_DISABLE +#define GPIO_153_PULLUP PULLUP_DISABLE +#define GPIO_154_PULLUP PULLUP_DISABLE +#define GPIO_155_PULLUP PULLUP_DISABLE +#define GPIO_156_PULLUP PULLUP_DISABLE +#define GPIO_157_PULLUP PULLUP_DISABLE +#define GPIO_158_PULLUP PULLUP_DISABLE +#define GPIO_159_PULLUP PULLUP_DISABLE +#define GPIO_160_PULLUP PULLUP_DISABLE +#define GPIO_161_PULLUP PULLUP_DISABLE +#define GPIO_162_PULLUP PULLUP_DISABLE +#define GPIO_163_PULLUP PULLUP_DISABLE +#define GPIO_164_PULLUP PULLUP_DISABLE +#define GPIO_165_PULLUP PULLUP_DISABLE +#define GPIO_166_PULLUP PULLUP_DISABLE +#define GPIO_167_PULLUP PULLUP_DISABLE +#define GPIO_168_PULLUP PULLUP_DISABLE +#define GPIO_169_PULLUP PULLUP_DISABLE +#define GPIO_170_PULLUP PULLUP_DISABLE +#define GPIO_171_PULLUP PULLUP_DISABLE +#define GPIO_172_PULLUP PULLUP_DISABLE +#define GPIO_173_PULLUP PULLUP_DISABLE +#define GPIO_174_PULLUP PULLUP_DISABLE +#define GPIO_175_PULLUP PULLUP_DISABLE +#define GPIO_176_PULLUP PULLUP_DISABLE +#define GPIO_177_PULLUP PULLUP_DISABLE +#define GPIO_178_PULLUP PULLUP_DISABLE +#define GPIO_179_PULLUP PULLUP_DISABLE +#define GPIO_180_PULLUP PULLUP_DISABLE +#define GPIO_180_PULLUP PULLUP_DISABLE +#define GPIO_181_PULLUP PULLUP_DISABLE +#define GPIO_182_PULLUP PULLUP_DISABLE +#define GPIO_183_PULLUP PULLUP_DISABLE +#define GPIO_184_PULLUP PULLUP_DISABLE +#define GPIO_185_PULLUP PULLUP_DISABLE +#define GPIO_186_PULLUP PULLUP_DISABLE +#define GPIO_187_PULLUP PULLUP_DISABLE +#define GPIO_188_PULLUP PULLUP_DISABLE +#define GPIO_189_PULLUP PULLUP_DISABLE +#define GPIO_190_PULLUP PULLUP_DISABLE +#define GPIO_191_PULLUP PULLUP_DISABLE +#define GPIO_192_PULLUP PULLUP_DISABLE +#define GPIO_193_PULLUP PULLUP_DISABLE +#define GPIO_194_PULLUP PULLUP_DISABLE +#define GPIO_195_PULLUP PULLUP_DISABLE +#define GPIO_196_PULLUP PULLUP_DISABLE +#define GPIO_197_PULLUP PULLUP_DISABLE +#define GPIO_198_PULLUP PULLUP_DISABLE +#define GPIO_199_PULLUP PULLUP_DISABLE +#define GPIO_200_PULLUP PULLUP_DISABLE +#define GPIO_201_PULLUP PULLUP_DISABLE +#define GPIO_202_PULLUP PULLUP_DISABLE +#define GPIO_203_PULLUP PULLUP_DISABLE +#define GPIO_204_PULLUP PULLUP_DISABLE +#define GPIO_205_PULLUP PULLUP_DISABLE +#define GPIO_206_PULLUP PULLUP_DISABLE +#define GPIO_207_PULLUP PULLUP_DISABLE +#define GPIO_208_PULLUP PULLUP_DISABLE +#define GPIO_209_PULLUP PULLUP_DISABLE +#define GPIO_210_PULLUP PULLUP_DISABLE +#define GPIO_211_PULLUP PULLUP_DISABLE +#define GPIO_212_PULLUP PULLUP_DISABLE +#define GPIO_213_PULLUP PULLUP_DISABLE +#define GPIO_214_PULLUP PULLUP_DISABLE +#define GPIO_215_PULLUP PULLUP_DISABLE +#define GPIO_216_PULLUP PULLUP_DISABLE +#define GPIO_217_PULLUP PULLUP_DISABLE +#define GPIO_218_PULLUP PULLUP_DISABLE +#define GPIO_219_PULLUP PULLUP_DISABLE +#define GPIO_220_PULLUP PULLUP_DISABLE +#define GPIO_221_PULLUP PULLUP_DISABLE +#define GPIO_222_PULLUP PULLUP_DISABLE +#define GPIO_223_PULLUP PULLUP_DISABLE +#define GPIO_224_PULLUP PULLUP_DISABLE +#define GPIO_225_PULLUP PULLUP_DISABLE +#define GPIO_226_PULLUP PULLUP_DISABLE +#define GPIO_227_PULLUP PULLUP_DISABLE +#define GPIO_228_PULLUP PULLUP_DISABLE +#define GPIO_229_PULLUP PULLUP_DISABLE + +#define PULLDOWN_ENABLE (1<<4) +#define PULLDOWN_DISABLE (0<<4) + +#define GPIO_00_PULLDOWN PULLDOWN_DISABLE +#define GPIO_01_PULLDOWN PULLDOWN_DISABLE +#define GPIO_02_PULLDOWN PULLDOWN_DISABLE +#define GPIO_03_PULLDOWN PULLDOWN_DISABLE +#define GPIO_04_PULLDOWN PULLDOWN_DISABLE +#define GPIO_05_PULLDOWN PULLDOWN_DISABLE +#define GPIO_06_PULLDOWN PULLDOWN_DISABLE +#define GPIO_07_PULLDOWN PULLDOWN_DISABLE +#define GPIO_08_PULLDOWN PULLDOWN_DISABLE +#define GPIO_09_PULLDOWN PULLDOWN_DISABLE +#define GPIO_10_PULLDOWN PULLDOWN_DISABLE +#define GPIO_11_PULLDOWN PULLDOWN_DISABLE +#define GPIO_12_PULLDOWN PULLDOWN_DISABLE +#define GPIO_13_PULLDOWN PULLDOWN_DISABLE +#define GPIO_14_PULLDOWN PULLDOWN_DISABLE +#define GPIO_15_PULLDOWN PULLDOWN_DISABLE +#define GPIO_16_PULLDOWN PULLDOWN_DISABLE +#define GPIO_17_PULLDOWN PULLDOWN_DISABLE +#define GPIO_18_PULLDOWN PULLDOWN_DISABLE +#define GPIO_19_PULLDOWN PULLDOWN_DISABLE +#define GPIO_20_PULLDOWN PULLDOWN_DISABLE +#define GPIO_21_PULLDOWN PULLDOWN_DISABLE +#define GPIO_22_PULLDOWN PULLDOWN_DISABLE +#define GPIO_23_PULLDOWN PULLDOWN_DISABLE +#define GPIO_24_PULLDOWN PULLDOWN_DISABLE +#define GPIO_25_PULLDOWN PULLDOWN_DISABLE +#define GPIO_26_PULLDOWN PULLDOWN_DISABLE +#define GPIO_27_PULLDOWN PULLDOWN_DISABLE +#define GPIO_28_PULLDOWN PULLDOWN_DISABLE +#define GPIO_29_PULLDOWN PULLDOWN_DISABLE +#define GPIO_30_PULLDOWN PULLDOWN_DISABLE +#define GPIO_31_PULLDOWN PULLDOWN_DISABLE +#define GPIO_32_PULLDOWN PULLDOWN_DISABLE +#define GPIO_33_PULLDOWN PULLDOWN_DISABLE +#define GPIO_34_PULLDOWN PULLDOWN_DISABLE +#define GPIO_35_PULLDOWN PULLDOWN_DISABLE +#define GPIO_36_PULLDOWN PULLDOWN_DISABLE +#define GPIO_37_PULLDOWN PULLDOWN_DISABLE +#define GPIO_38_PULLDOWN PULLDOWN_DISABLE +#define GPIO_39_PULLDOWN PULLDOWN_DISABLE +#define GPIO_40_PULLDOWN PULLDOWN_DISABLE +#define GPIO_41_PULLDOWN PULLDOWN_DISABLE +#define GPIO_42_PULLDOWN PULLDOWN_DISABLE +#define GPIO_43_PULLDOWN PULLDOWN_DISABLE +#define GPIO_44_PULLDOWN PULLDOWN_DISABLE +#define GPIO_45_PULLDOWN PULLDOWN_DISABLE +#define GPIO_46_PULLDOWN PULLDOWN_DISABLE +#define GPIO_47_PULLDOWN PULLDOWN_DISABLE +#define GPIO_48_PULLDOWN PULLDOWN_DISABLE +#define GPIO_49_PULLDOWN PULLDOWN_DISABLE +#define GPIO_50_PULLDOWN PULLDOWN_DISABLE +#define GPIO_51_PULLDOWN PULLDOWN_DISABLE +#define GPIO_52_PULLDOWN PULLDOWN_DISABLE +#define GPIO_53_PULLDOWN PULLDOWN_DISABLE +#define GPIO_54_PULLDOWN PULLDOWN_DISABLE +#define GPIO_55_PULLDOWN PULLDOWN_DISABLE +#define GPIO_56_PULLDOWN PULLDOWN_DISABLE +#define GPIO_57_PULLDOWN PULLDOWN_DISABLE +#define GPIO_58_PULLDOWN PULLDOWN_DISABLE +#define GPIO_59_PULLDOWN PULLDOWN_DISABLE +#define GPIO_60_PULLDOWN PULLDOWN_DISABLE +#define GPIO_61_PULLDOWN PULLDOWN_DISABLE +#define GPIO_62_PULLDOWN PULLDOWN_DISABLE +#define GPIO_63_PULLDOWN PULLDOWN_DISABLE +#define GPIO_64_PULLDOWN PULLDOWN_DISABLE +#define GPIO_65_PULLDOWN PULLDOWN_DISABLE +#define GPIO_66_PULLDOWN PULLDOWN_DISABLE +#define GPIO_67_PULLDOWN PULLDOWN_DISABLE +#define GPIO_68_PULLDOWN PULLDOWN_DISABLE +#define GPIO_69_PULLDOWN PULLDOWN_DISABLE +#define GPIO_70_PULLDOWN PULLDOWN_DISABLE +#define GPIO_71_PULLDOWN PULLDOWN_DISABLE +#define GPIO_72_PULLDOWN PULLDOWN_DISABLE +#define GPIO_73_PULLDOWN PULLDOWN_DISABLE +#define GPIO_74_PULLDOWN PULLDOWN_DISABLE +#define GPIO_75_PULLDOWN PULLDOWN_DISABLE +#define GPIO_76_PULLDOWN PULLDOWN_DISABLE +#define GPIO_77_PULLDOWN PULLDOWN_DISABLE +#define GPIO_78_PULLDOWN PULLDOWN_DISABLE +#define GPIO_79_PULLDOWN PULLDOWN_DISABLE +#define GPIO_80_PULLDOWN PULLDOWN_DISABLE +#define GPIO_80_PULLDOWN PULLDOWN_DISABLE +#define GPIO_81_PULLDOWN PULLDOWN_DISABLE +#define GPIO_82_PULLDOWN PULLDOWN_DISABLE +#define GPIO_83_PULLDOWN PULLDOWN_DISABLE +#define GPIO_84_PULLDOWN PULLDOWN_DISABLE +#define GPIO_85_PULLDOWN PULLDOWN_DISABLE +#define GPIO_86_PULLDOWN PULLDOWN_DISABLE +#define GPIO_87_PULLDOWN PULLDOWN_DISABLE +#define GPIO_88_PULLDOWN PULLDOWN_DISABLE +#define GPIO_89_PULLDOWN PULLDOWN_DISABLE +#define GPIO_90_PULLDOWN PULLDOWN_DISABLE +#define GPIO_91_PULLDOWN PULLDOWN_DISABLE +#define GPIO_92_PULLDOWN PULLDOWN_DISABLE +#define GPIO_93_PULLDOWN PULLDOWN_DISABLE +#define GPIO_94_PULLDOWN PULLDOWN_DISABLE +#define GPIO_95_PULLDOWN PULLDOWN_DISABLE +#define GPIO_96_PULLDOWN PULLDOWN_DISABLE +#define GPIO_97_PULLDOWN PULLDOWN_DISABLE +#define GPIO_98_PULLDOWN PULLDOWN_DISABLE +#define GPIO_99_PULLDOWN PULLDOWN_DISABLE +#define GPIO_100_PULLDOWN PULLDOWN_DISABLE +#define GPIO_101_PULLDOWN PULLDOWN_DISABLE +#define GPIO_102_PULLDOWN PULLDOWN_DISABLE +#define GPIO_103_PULLDOWN PULLDOWN_DISABLE +#define GPIO_104_PULLDOWN PULLDOWN_DISABLE +#define GPIO_105_PULLDOWN PULLDOWN_DISABLE +#define GPIO_106_PULLDOWN PULLDOWN_DISABLE +#define GPIO_107_PULLDOWN PULLDOWN_DISABLE +#define GPIO_108_PULLDOWN PULLDOWN_DISABLE +#define GPIO_109_PULLDOWN PULLDOWN_DISABLE +#define GPIO_110_PULLDOWN PULLDOWN_DISABLE +#define GPIO_111_PULLDOWN PULLDOWN_DISABLE +#define GPIO_112_PULLDOWN PULLDOWN_DISABLE +#define GPIO_113_PULLDOWN PULLDOWN_DISABLE +#define GPIO_114_PULLDOWN PULLDOWN_DISABLE +#define GPIO_115_PULLDOWN PULLDOWN_DISABLE +#define GPIO_116_PULLDOWN PULLDOWN_DISABLE +#define GPIO_117_PULLDOWN PULLDOWN_DISABLE +#define GPIO_118_PULLDOWN PULLDOWN_DISABLE +#define GPIO_119_PULLDOWN PULLDOWN_DISABLE +#define GPIO_120_PULLDOWN PULLDOWN_DISABLE +#define GPIO_121_PULLDOWN PULLDOWN_DISABLE +#define GPIO_122_PULLDOWN PULLDOWN_DISABLE +#define GPIO_123_PULLDOWN PULLDOWN_DISABLE +#define GPIO_124_PULLDOWN PULLDOWN_DISABLE +#define GPIO_125_PULLDOWN PULLDOWN_DISABLE +#define GPIO_126_PULLDOWN PULLDOWN_DISABLE +#define GPIO_127_PULLDOWN PULLDOWN_DISABLE +#define GPIO_128_PULLDOWN PULLDOWN_DISABLE +#define GPIO_129_PULLDOWN PULLDOWN_DISABLE +#define GPIO_130_PULLDOWN PULLDOWN_DISABLE +#define GPIO_131_PULLDOWN PULLDOWN_DISABLE +#define GPIO_132_PULLDOWN PULLDOWN_DISABLE +#define GPIO_133_PULLDOWN PULLDOWN_DISABLE +#define GPIO_134_PULLDOWN PULLDOWN_DISABLE +#define GPIO_135_PULLDOWN PULLDOWN_DISABLE +#define GPIO_136_PULLDOWN PULLDOWN_DISABLE +#define GPIO_137_PULLDOWN PULLDOWN_DISABLE +#define GPIO_138_PULLDOWN PULLDOWN_DISABLE +#define GPIO_139_PULLDOWN PULLDOWN_DISABLE +#define GPIO_140_PULLDOWN PULLDOWN_DISABLE +#define GPIO_141_PULLDOWN PULLDOWN_DISABLE +#define GPIO_142_PULLDOWN PULLDOWN_DISABLE +#define GPIO_143_PULLDOWN PULLDOWN_DISABLE +#define GPIO_144_PULLDOWN PULLDOWN_DISABLE +#define GPIO_145_PULLDOWN PULLDOWN_DISABLE +#define GPIO_146_PULLDOWN PULLDOWN_DISABLE +#define GPIO_147_PULLDOWN PULLDOWN_DISABLE +#define GPIO_148_PULLDOWN PULLDOWN_DISABLE +#define GPIO_149_PULLDOWN PULLDOWN_DISABLE +#define GPIO_150_PULLDOWN PULLDOWN_DISABLE +#define GPIO_151_PULLDOWN PULLDOWN_DISABLE +#define GPIO_152_PULLDOWN PULLDOWN_DISABLE +#define GPIO_153_PULLDOWN PULLDOWN_DISABLE +#define GPIO_154_PULLDOWN PULLDOWN_DISABLE +#define GPIO_155_PULLDOWN PULLDOWN_DISABLE +#define GPIO_156_PULLDOWN PULLDOWN_DISABLE +#define GPIO_157_PULLDOWN PULLDOWN_DISABLE +#define GPIO_158_PULLDOWN PULLDOWN_DISABLE +#define GPIO_159_PULLDOWN PULLDOWN_DISABLE +#define GPIO_160_PULLDOWN PULLDOWN_DISABLE +#define GPIO_161_PULLDOWN PULLDOWN_DISABLE +#define GPIO_162_PULLDOWN PULLDOWN_ENABLE +#define GPIO_163_PULLDOWN PULLDOWN_ENABLE +#define GPIO_164_PULLDOWN PULLDOWN_ENABLE +#define GPIO_165_PULLDOWN PULLDOWN_DISABLE +#define GPIO_166_PULLDOWN PULLDOWN_DISABLE +#define GPIO_167_PULLDOWN PULLDOWN_ENABLE +#define GPIO_168_PULLDOWN PULLDOWN_DISABLE +#define GPIO_169_PULLDOWN PULLDOWN_DISABLE +#define GPIO_170_PULLDOWN PULLDOWN_DISABLE +#define GPIO_171_PULLDOWN PULLDOWN_DISABLE +#define GPIO_172_PULLDOWN PULLDOWN_DISABLE +#define GPIO_173_PULLDOWN PULLDOWN_DISABLE +#define GPIO_174_PULLDOWN PULLDOWN_DISABLE +#define GPIO_175_PULLDOWN PULLDOWN_DISABLE +#define GPIO_176_PULLDOWN PULLDOWN_DISABLE +#define GPIO_177_PULLDOWN PULLDOWN_DISABLE +#define GPIO_178_PULLDOWN PULLDOWN_DISABLE +#define GPIO_179_PULLDOWN PULLDOWN_DISABLE +#define GPIO_180_PULLDOWN PULLDOWN_DISABLE +#define GPIO_180_PULLDOWN PULLDOWN_DISABLE +#define GPIO_181_PULLDOWN PULLDOWN_DISABLE +#define GPIO_182_PULLDOWN PULLDOWN_DISABLE +#define GPIO_183_PULLDOWN PULLDOWN_DISABLE +#define GPIO_184_PULLDOWN PULLDOWN_DISABLE +#define GPIO_185_PULLDOWN PULLDOWN_ENABLE +#define GPIO_186_PULLDOWN PULLDOWN_ENABLE +#define GPIO_187_PULLDOWN PULLDOWN_DISABLE +#define GPIO_188_PULLDOWN PULLDOWN_DISABLE +#define GPIO_189_PULLDOWN PULLDOWN_DISABLE +#define GPIO_190_PULLDOWN PULLDOWN_DISABLE +#define GPIO_191_PULLDOWN PULLDOWN_DISABLE +#define GPIO_192_PULLDOWN PULLDOWN_DISABLE +#define GPIO_193_PULLDOWN PULLDOWN_DISABLE +#define GPIO_194_PULLDOWN PULLDOWN_DISABLE +#define GPIO_195_PULLDOWN PULLDOWN_DISABLE +#define GPIO_196_PULLDOWN PULLDOWN_DISABLE +#define GPIO_197_PULLDOWN PULLDOWN_DISABLE +#define GPIO_198_PULLDOWN PULLDOWN_DISABLE +#define GPIO_199_PULLDOWN PULLDOWN_DISABLE +#define GPIO_200_PULLDOWN PULLDOWN_DISABLE +#define GPIO_201_PULLDOWN PULLDOWN_DISABLE +#define GPIO_202_PULLDOWN PULLDOWN_DISABLE +#define GPIO_203_PULLDOWN PULLDOWN_DISABLE +#define GPIO_204_PULLDOWN PULLDOWN_DISABLE +#define GPIO_205_PULLDOWN PULLDOWN_DISABLE +#define GPIO_206_PULLDOWN PULLDOWN_DISABLE +#define GPIO_207_PULLDOWN PULLDOWN_DISABLE +#define GPIO_208_PULLDOWN PULLDOWN_DISABLE +#define GPIO_209_PULLDOWN PULLDOWN_DISABLE +#define GPIO_210_PULLDOWN PULLDOWN_DISABLE +#define GPIO_211_PULLDOWN PULLDOWN_DISABLE +#define GPIO_212_PULLDOWN PULLDOWN_DISABLE +#define GPIO_213_PULLDOWN PULLDOWN_DISABLE +#define GPIO_214_PULLDOWN PULLDOWN_DISABLE +#define GPIO_215_PULLDOWN PULLDOWN_DISABLE +#define GPIO_216_PULLDOWN PULLDOWN_DISABLE +#define GPIO_217_PULLDOWN PULLDOWN_DISABLE +#define GPIO_218_PULLDOWN PULLDOWN_DISABLE +#define GPIO_219_PULLDOWN PULLDOWN_DISABLE +#define GPIO_220_PULLDOWN PULLDOWN_DISABLE +#define GPIO_221_PULLDOWN PULLDOWN_DISABLE +#define GPIO_222_PULLDOWN PULLDOWN_DISABLE +#define GPIO_223_PULLDOWN PULLDOWN_DISABLE +#define GPIO_224_PULLDOWN PULLDOWN_DISABLE +#define GPIO_225_PULLDOWN PULLDOWN_DISABLE +#define GPIO_226_PULLDOWN PULLDOWN_DISABLE +#define GPIO_227_PULLDOWN PULLDOWN_DISABLE +#define GPIO_228_PULLDOWN PULLDOWN_DISABLE +#define GPIO_229_PULLDOWN PULLDOWN_DISABLE + +#define EVENT_DISABLE 0 +#define EVENT_ENABLE 1 + +#define GEVENT_00_EVENTENABLE EVENT_DISABLE +#define GEVENT_01_EVENTENABLE EVENT_DISABLE +#define GEVENT_02_EVENTENABLE EVENT_ENABLE // APU THERMTRIP# +#define GEVENT_03_EVENTENABLE EVENT_ENABLE // EC_SCI# +#define GEVENT_04_EVENTENABLE EVENT_ENABLE // APU_MEMHOT# +#define GEVENT_05_EVENTENABLE EVENT_ENABLE // PCIE_EXPCARD_PWREN# +#define GEVENT_06_EVENTENABLE EVENT_DISABLE +#define GEVENT_07_EVENTENABLE EVENT_DISABLE +#define GEVENT_08_EVENTENABLE EVENT_DISABLE +#define GEVENT_09_EVENTENABLE EVENT_ENABLE // WF_RADIO +#define GEVENT_10_EVENTENABLE EVENT_DISABLE +#define GEVENT_11_EVENTENABLE EVENT_DISABLE +#define GEVENT_12_EVENTENABLE EVENT_ENABLE // SMBALERT# +#define GEVENT_13_EVENTENABLE EVENT_DISABLE +#define GEVENT_14_EVENTENABLE EVENT_ENABLE // LASSO_DET#/DOCK# +#define GEVENT_15_EVENTENABLE EVENT_ENABLE // ODD_PLUGIN# +#define GEVENT_16_EVENTENABLE EVENT_ENABLE // ODD_DA +#define GEVENT_17_EVENTENABLE EVENT_ENABLE // TWARN +#define GEVENT_18_EVENTENABLE EVENT_DISABLE +#define GEVENT_19_EVENTENABLE EVENT_DISABLE +#define GEVENT_20_EVENTENABLE EVENT_DISABLE +#define GEVENT_21_EVENTENABLE EVENT_DISABLE +#define GEVENT_22_EVENTENABLE EVENT_ENABLE // LID_CLOSE# +#define GEVENT_23_EVENTENABLE EVENT_DISABLE // EC_SMI# + +#define SCITRIG_LOW 0 +#define SCITRIG_HI 1 + +#define GEVENT_00_SCITRIG SCITRIG_LOW +#define GEVENT_01_SCITRIG SCITRIG_LOW +#define GEVENT_02_SCITRIG SCITRIG_LOW +#define GEVENT_03_SCITRIG SCITRIG_LOW +#define GEVENT_04_SCITRIG SCITRIG_LOW +#define GEVENT_05_SCITRIG SCITRIG_LOW +#define GEVENT_06_SCITRIG SCITRIG_LOW +#define GEVENT_07_SCITRIG SCITRIG_LOW +#define GEVENT_08_SCITRIG SCITRIG_LOW +#define GEVENT_09_SCITRIG SCITRIG_LOW +#define GEVENT_10_SCITRIG SCITRIG_LOW +#define GEVENT_11_SCITRIG SCITRIG_LOW +#define GEVENT_12_SCITRIG SCITRIG_LOW +#define GEVENT_13_SCITRIG SCITRIG_LOW +#define GEVENT_14_SCITRIG SCITRIG_LOW +#define GEVENT_15_SCITRIG SCITRIG_LOW +#define GEVENT_16_SCITRIG SCITRIG_LOW +#define GEVENT_17_SCITRIG SCITRIG_HI +#define GEVENT_18_SCITRIG SCITRIG_LOW +#define GEVENT_19_SCITRIG SCITRIG_LOW +#define GEVENT_20_SCITRIG SCITRIG_LOW +#define GEVENT_21_SCITRIG SCITRIG_LOW +#define GEVENT_22_SCITRIG SCITRIG_LOW +#define GEVENT_23_SCITRIG SCITRIG_LOW + +#define SCILEVEL_EDGE 0 +#define SCILEVEL_LEVEL 1 + +#define GEVENT_00_SCILEVEL SCILEVEL_EDGE +#define GEVENT_01_SCILEVEL SCILEVEL_EDGE +#define GEVENT_02_SCILEVEL SCILEVEL_EDGE +#define GEVENT_03_SCILEVEL SCILEVEL_EDGE +#define GEVENT_04_SCILEVEL SCILEVEL_EDGE +#define GEVENT_05_SCILEVEL SCILEVEL_EDGE +#define GEVENT_06_SCILEVEL SCILEVEL_EDGE +#define GEVENT_07_SCILEVEL SCILEVEL_EDGE +#define GEVENT_08_SCILEVEL SCILEVEL_EDGE +#define GEVENT_09_SCILEVEL SCILEVEL_EDGE +#define GEVENT_10_SCILEVEL SCILEVEL_EDGE +#define GEVENT_11_SCILEVEL SCILEVEL_EDGE +#define GEVENT_12_SCILEVEL SCILEVEL_EDGE +#define GEVENT_13_SCILEVEL SCILEVEL_EDGE +#define GEVENT_14_SCILEVEL SCILEVEL_EDGE +#define GEVENT_15_SCILEVEL SCILEVEL_EDGE +#define GEVENT_16_SCILEVEL SCILEVEL_EDGE +#define GEVENT_17_SCILEVEL SCILEVEL_EDGE +#define GEVENT_18_SCILEVEL SCILEVEL_EDGE +#define GEVENT_19_SCILEVEL SCILEVEL_EDGE +#define GEVENT_20_SCILEVEL SCILEVEL_EDGE +#define GEVENT_21_SCILEVEL SCILEVEL_EDGE +#define GEVENT_22_SCILEVEL SCILEVEL_EDGE +#define GEVENT_23_SCILEVEL SCILEVEL_EDGE + +#define SMISCI_DISABLE 0 +#define SMISCI_ENABLE 1 + +#define GEVENT_00_SMISCIEN SMISCI_DISABLE +#define GEVENT_01_SMISCIEN SMISCI_DISABLE +#define GEVENT_02_SMISCIEN SMISCI_DISABLE +#define GEVENT_03_SMISCIEN SMISCI_DISABLE +#define GEVENT_04_SMISCIEN SMISCI_DISABLE +#define GEVENT_05_SMISCIEN SMISCI_DISABLE +#define GEVENT_06_SMISCIEN SMISCI_DISABLE +#define GEVENT_07_SMISCIEN SMISCI_DISABLE +#define GEVENT_08_SMISCIEN SMISCI_DISABLE +#define GEVENT_09_SMISCIEN SMISCI_DISABLE +#define GEVENT_10_SMISCIEN SMISCI_DISABLE +#define GEVENT_11_SMISCIEN SMISCI_DISABLE +#define GEVENT_12_SMISCIEN SMISCI_DISABLE +#define GEVENT_13_SMISCIEN SMISCI_DISABLE +#define GEVENT_14_SMISCIEN SMISCI_DISABLE +#define GEVENT_15_SMISCIEN SMISCI_DISABLE +#define GEVENT_16_SMISCIEN SMISCI_DISABLE +#define GEVENT_17_SMISCIEN SMISCI_DISABLE +#define GEVENT_18_SMISCIEN SMISCI_DISABLE +#define GEVENT_19_SMISCIEN SMISCI_DISABLE +#define GEVENT_20_SMISCIEN SMISCI_DISABLE +#define GEVENT_21_SMISCIEN SMISCI_DISABLE +#define GEVENT_22_SMISCIEN SMISCI_DISABLE +#define GEVENT_23_SMISCIEN SMISCI_DISABLE + +#define SCIS0_DISABLE 0 +#define SCIS0_ENABLE 1 + +#define GEVENT_00_SCIS0EN SCIS0_DISABLE +#define GEVENT_01_SCIS0EN SCIS0_DISABLE +#define GEVENT_02_SCIS0EN SCIS0_DISABLE +#define GEVENT_03_SCIS0EN SCIS0_DISABLE +#define GEVENT_04_SCIS0EN SCIS0_DISABLE +#define GEVENT_05_SCIS0EN SCIS0_DISABLE +#define GEVENT_06_SCIS0EN SCIS0_DISABLE +#define GEVENT_07_SCIS0EN SCIS0_DISABLE +#define GEVENT_08_SCIS0EN SCIS0_DISABLE +#define GEVENT_09_SCIS0EN SCIS0_DISABLE +#define GEVENT_10_SCIS0EN SCIS0_DISABLE +#define GEVENT_11_SCIS0EN SCIS0_DISABLE +#define GEVENT_12_SCIS0EN SCIS0_DISABLE +#define GEVENT_13_SCIS0EN SCIS0_DISABLE +#define GEVENT_14_SCIS0EN SCIS0_DISABLE +#define GEVENT_15_SCIS0EN SCIS0_DISABLE +#define GEVENT_16_SCIS0EN SCIS0_DISABLE +#define GEVENT_17_SCIS0EN SCIS0_DISABLE +#define GEVENT_18_SCIS0EN SCIS0_DISABLE +#define GEVENT_19_SCIS0EN SCIS0_DISABLE +#define GEVENT_20_SCIS0EN SCIS0_DISABLE +#define GEVENT_21_SCIS0EN SCIS0_DISABLE +#define GEVENT_22_SCIS0EN SCIS0_DISABLE +#define GEVENT_23_SCIS0EN SCIS0_DISABLE + +#define GEVENT_SCIMASK 0x1F +#define GEVENT_00_SCIMAP 0 +#define GEVENT_01_SCIMAP 1 +#define GEVENT_02_SCIMAP 2 +#define GEVENT_03_SCIMAP 3 +#define GEVENT_04_SCIMAP 4 +#define GEVENT_05_SCIMAP 5 +#define GEVENT_06_SCIMAP 6 +#define GEVENT_07_SCIMAP 7 +#define GEVENT_08_SCIMAP 8 +#define GEVENT_09_SCIMAP 9 +#define GEVENT_10_SCIMAP 10 +#define GEVENT_11_SCIMAP 11 +#define GEVENT_12_SCIMAP 12 +#define GEVENT_13_SCIMAP 13 +#define GEVENT_14_SCIMAP 14 +#define GEVENT_15_SCIMAP 15 +#define GEVENT_16_SCIMAP 16 +#define GEVENT_17_SCIMAP 17 +#define GEVENT_18_SCIMAP 18 +#define GEVENT_19_SCIMAP 19 +#define GEVENT_20_SCIMAP 20 +#define GEVENT_21_SCIMAP 21 +#define GEVENT_22_SCIMAP 22 +#define GEVENT_23_SCIMAP 23 + +#define SMITRIG_LOW 0 +#define SMITRIG_HI 1 + +#define GEVENT_00_SMITRIG SMITRIG_HI +#define GEVENT_01_SMITRIG SMITRIG_HI +#define GEVENT_02_SMITRIG SMITRIG_HI +#define GEVENT_03_SMITRIG SMITRIG_HI +#define GEVENT_04_SMITRIG SMITRIG_HI +#define GEVENT_05_SMITRIG SMITRIG_HI +#define GEVENT_06_SMITRIG SMITRIG_HI +#define GEVENT_07_SMITRIG SMITRIG_HI +#define GEVENT_08_SMITRIG SMITRIG_HI +#define GEVENT_09_SMITRIG SMITRIG_HI +#define GEVENT_10_SMITRIG SMITRIG_HI +#define GEVENT_11_SMITRIG SMITRIG_HI +#define GEVENT_12_SMITRIG SMITRIG_HI +#define GEVENT_13_SMITRIG SMITRIG_HI +#define GEVENT_14_SMITRIG SMITRIG_HI +#define GEVENT_15_SMITRIG SMITRIG_HI +#define GEVENT_16_SMITRIG SMITRIG_HI +#define GEVENT_17_SMITRIG SMITRIG_HI +#define GEVENT_18_SMITRIG SMITRIG_HI +#define GEVENT_19_SMITRIG SMITRIG_HI +#define GEVENT_20_SMITRIG SMITRIG_HI +#define GEVENT_21_SMITRIG SMITRIG_HI +#define GEVENT_22_SMITRIG SMITRIG_HI +#define GEVENT_23_SMITRIG SMITRIG_HI + +#define SMICONTROL_MASK 3 +#define SMICONTROL_DISABLE 0 +#define SMICONTROL_SMI 1 +#define SMICONTROL_NMI 2 +#define SMICONTROL_IRQ13 3 + +#define GEVENT_00_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_01_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_02_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_03_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_04_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_05_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_06_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_07_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_08_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_09_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_10_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_11_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_12_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_13_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_14_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_15_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_16_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_17_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_18_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_19_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_20_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_21_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_22_SMICONTROL SMICONTROL_DISABLE +#define GEVENT_23_SMICONTROL SMICONTROL_DISABLE + +#define GPIO_RSVD_ZONE0_S GPIO_81 +#define GPIO_RSVD_ZONE0_E GPIO_95 +#define GPIO_RSVD_ZONE1_S GPIO_120 +#define GPIO_RSVD_ZONE1_E GPIO_127 + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ +typedef enum _GPIO_COUNT +{ + GPIO_00=0, + GPIO_01, + GPIO_02, + GPIO_03, + GPIO_04, + GPIO_05, + GPIO_06, + GPIO_07, + GPIO_08, + GPIO_09, + GPIO_10, + GPIO_11, + GPIO_12, + GPIO_13, + GPIO_14, + GPIO_15, + GPIO_16, + GPIO_17, + GPIO_18, + GPIO_19, + GPIO_20, + GPIO_21, + GPIO_22, + GPIO_23, + GPIO_24, + GPIO_25, + GPIO_26, + GPIO_27, + GPIO_28, + GPIO_29, + GPIO_30, + GPIO_31, + GPIO_32, + GPIO_33, + GPIO_34, + GPIO_35, + GPIO_36, + GPIO_37, + GPIO_38, + GPIO_39, + GPIO_40, + GPIO_41, + GPIO_42, + GPIO_43, + GPIO_44, + GPIO_45, + GPIO_46, + GPIO_47, + GPIO_48, + GPIO_49, + GPIO_50, + GPIO_51, + GPIO_52, + GPIO_53, + GPIO_54, + GPIO_55, + GPIO_56, + GPIO_57, + GPIO_58, + GPIO_59, + GPIO_60, + GPIO_61, + GPIO_62, + GPIO_63, + GPIO_64, + GPIO_65, + GPIO_66, + GPIO_67, + GPIO_68, + GPIO_69, + GPIO_70, + GPIO_71, + GPIO_72, + GPIO_73, + GPIO_74, + GPIO_75, + GPIO_76, + GPIO_77, + GPIO_78, + GPIO_79, + GPIO_80, + GPIO_81, + GPIO_82, + GPIO_83, + GPIO_84, + GPIO_85, + GPIO_86, + GPIO_87, + GPIO_88, + GPIO_89, + GPIO_90, + GPIO_91, + GPIO_92, + GPIO_93, + GPIO_94, + GPIO_95, + GPIO_96, + GPIO_97, + GPIO_98, + GPIO_99, + GPIO_100, + GPIO_101, + GPIO_102, + GPIO_103, + GPIO_104, + GPIO_105, + GPIO_106, + GPIO_107, + GPIO_108, + GPIO_109, + GPIO_110, + GPIO_111, + GPIO_112, + GPIO_113, + GPIO_114, + GPIO_115, + GPIO_116, + GPIO_117, + GPIO_118, + GPIO_119, + GPIO_120, + GPIO_121, + GPIO_122, + GPIO_123, + GPIO_124, + GPIO_125, + GPIO_126, + GPIO_127, + GPIO_128, + GPIO_129, + GPIO_130, + GPIO_131, + GPIO_132, + GPIO_133, + GPIO_134, + GPIO_135, + GPIO_136, + GPIO_137, + GPIO_138, + GPIO_139, + GPIO_140, + GPIO_141, + GPIO_142, + GPIO_143, + GPIO_144, + GPIO_145, + GPIO_146, + GPIO_147, + GPIO_148, + GPIO_149, + GPIO_150, + GPIO_151, + GPIO_152, + GPIO_153, + GPIO_154, + GPIO_155, + GPIO_156, + GPIO_157, + GPIO_158, + GPIO_159, + GPIO_160, + GPIO_161, + GPIO_162, + GPIO_163, + GPIO_164, + GPIO_165, + GPIO_166, + GPIO_167, + GPIO_168, + GPIO_169, + GPIO_170, + GPIO_171, + GPIO_172, + GPIO_173, + GPIO_174, + GPIO_175, + GPIO_176, + GPIO_177, + GPIO_178, + GPIO_179, + GPIO_180, + GPIO_181, + GPIO_182, + GPIO_183, + GPIO_184, + GPIO_185, + GPIO_186, + GPIO_187, + GPIO_188, + GPIO_189, + GPIO_190, + GPIO_191, + GPIO_192, + GPIO_193, + GPIO_194, + GPIO_195, + GPIO_196, + GPIO_197, + GPIO_198, + GPIO_199, + GPIO_200, + GPIO_201, + GPIO_202, + GPIO_203, + GPIO_204, + GPIO_205, + GPIO_206, + GPIO_207, + GPIO_208, + GPIO_209, + GPIO_210, + GPIO_211, + GPIO_212, + GPIO_213, + GPIO_214, + GPIO_215, + GPIO_216, + GPIO_217, + GPIO_218, + GPIO_219, + GPIO_220, + GPIO_221, + GPIO_222, + GPIO_223, + GPIO_224, + GPIO_225, + GPIO_226, + GPIO_227, + GPIO_228, + GPIO_229, + MAX_GPIO_NO +} GPIO_COUNT; + +typedef struct _GPIO_SETTINGS +{ + u8 select; + u8 type; + u8 value; + u8 NonGpioGevent; +} GPIO_SETTINGS; + +GPIO_SETTINGS gpio_table[]= +{ + {GPIO_00_SELECT, GPIO_00_TYPE, GPO_00_LEVEL+GPIO_00_STICKY+GPIO_00_PULLUP+GPIO_00_PULLDOWN, GPIO_00_SELECT}, + {GPIO_01_SELECT, GPIO_01_TYPE, GPO_01_LEVEL+GPIO_01_STICKY+GPIO_01_PULLUP+GPIO_01_PULLDOWN, GPIO_01_SELECT}, + {GPIO_02_SELECT, GPIO_02_TYPE, GPO_02_LEVEL+GPIO_02_STICKY+GPIO_02_PULLUP+GPIO_02_PULLDOWN, GPIO_02_SELECT}, + {GPIO_03_SELECT, GPIO_03_TYPE, GPO_03_LEVEL+GPIO_03_STICKY+GPIO_03_PULLUP+GPIO_03_PULLDOWN, GPIO_03_SELECT}, + {GPIO_04_SELECT, GPIO_04_TYPE, GPO_04_LEVEL+GPIO_04_STICKY+GPIO_04_PULLUP+GPIO_04_PULLDOWN, GPIO_04_SELECT}, + {GPIO_05_SELECT, GPIO_05_TYPE, GPO_05_LEVEL+GPIO_05_STICKY+GPIO_05_PULLUP+GPIO_05_PULLDOWN, GPIO_05_SELECT}, + {GPIO_06_SELECT, GPIO_06_TYPE, GPO_06_LEVEL+GPIO_06_STICKY+GPIO_06_PULLUP+GPIO_06_PULLDOWN, GPIO_06_SELECT}, + {GPIO_07_SELECT, GPIO_07_TYPE, GPO_07_LEVEL+GPIO_07_STICKY+GPIO_07_PULLUP+GPIO_07_PULLDOWN, GPIO_07_SELECT}, + {GPIO_08_SELECT, GPIO_08_TYPE, GPO_08_LEVEL+GPIO_08_STICKY+GPIO_08_PULLUP+GPIO_08_PULLDOWN, GPIO_08_SELECT}, + {GPIO_09_SELECT, GPIO_09_TYPE, GPO_09_LEVEL+GPIO_09_STICKY+GPIO_09_PULLUP+GPIO_09_PULLDOWN, GPIO_09_SELECT}, + {GPIO_10_SELECT, GPIO_10_TYPE, GPO_10_LEVEL+GPIO_10_STICKY+GPIO_10_PULLUP+GPIO_10_PULLDOWN, GPIO_10_SELECT}, + {GPIO_11_SELECT, GPIO_11_TYPE, GPO_11_LEVEL+GPIO_11_STICKY+GPIO_11_PULLUP+GPIO_11_PULLDOWN, GPIO_11_SELECT}, + {GPIO_12_SELECT, GPIO_12_TYPE, GPO_12_LEVEL+GPIO_12_STICKY+GPIO_12_PULLUP+GPIO_12_PULLDOWN, GPIO_12_SELECT}, + {GPIO_13_SELECT, GPIO_13_TYPE, GPO_13_LEVEL+GPIO_13_STICKY+GPIO_13_PULLUP+GPIO_13_PULLDOWN, GPIO_13_SELECT}, + {GPIO_14_SELECT, GPIO_14_TYPE, GPO_14_LEVEL+GPIO_14_STICKY+GPIO_14_PULLUP+GPIO_14_PULLDOWN, GPIO_14_SELECT}, + {GPIO_15_SELECT, GPIO_15_TYPE, GPO_15_LEVEL+GPIO_15_STICKY+GPIO_15_PULLUP+GPIO_15_PULLDOWN, GPIO_15_SELECT}, + {GPIO_16_SELECT, GPIO_16_TYPE, GPO_16_LEVEL+GPIO_16_STICKY+GPIO_16_PULLUP+GPIO_16_PULLDOWN, GPIO_16_SELECT}, + {GPIO_17_SELECT, GPIO_17_TYPE, GPO_17_LEVEL+GPIO_17_STICKY+GPIO_17_PULLUP+GPIO_17_PULLDOWN, GPIO_17_SELECT}, + {GPIO_18_SELECT, GPIO_18_TYPE, GPO_18_LEVEL+GPIO_18_STICKY+GPIO_18_PULLUP+GPIO_18_PULLDOWN, GPIO_18_SELECT}, + {GPIO_19_SELECT, GPIO_19_TYPE, GPO_19_LEVEL+GPIO_19_STICKY+GPIO_19_PULLUP+GPIO_19_PULLDOWN, GPIO_19_SELECT}, + {GPIO_20_SELECT, GPIO_20_TYPE, GPO_20_LEVEL+GPIO_20_STICKY+GPIO_20_PULLUP+GPIO_20_PULLDOWN, GPIO_20_SELECT}, + {GPIO_21_SELECT, GPIO_21_TYPE, GPO_21_LEVEL+GPIO_21_STICKY+GPIO_21_PULLUP+GPIO_21_PULLDOWN, GPIO_21_SELECT}, + {GPIO_22_SELECT, GPIO_22_TYPE, GPO_22_LEVEL+GPIO_22_STICKY+GPIO_22_PULLUP+GPIO_22_PULLDOWN, GPIO_22_SELECT}, + {GPIO_23_SELECT, GPIO_23_TYPE, GPO_23_LEVEL+GPIO_23_STICKY+GPIO_23_PULLUP+GPIO_23_PULLDOWN, GPIO_23_SELECT}, + {GPIO_24_SELECT, GPIO_24_TYPE, GPO_24_LEVEL+GPIO_24_STICKY+GPIO_24_PULLUP+GPIO_24_PULLDOWN, GPIO_24_SELECT}, + {GPIO_25_SELECT, GPIO_25_TYPE, GPO_25_LEVEL+GPIO_25_STICKY+GPIO_25_PULLUP+GPIO_25_PULLDOWN, GPIO_25_SELECT}, + {GPIO_26_SELECT, GPIO_26_TYPE, GPO_26_LEVEL+GPIO_26_STICKY+GPIO_26_PULLUP+GPIO_26_PULLDOWN, GPIO_26_SELECT}, + {GPIO_27_SELECT, GPIO_27_TYPE, GPO_27_LEVEL+GPIO_27_STICKY+GPIO_27_PULLUP+GPIO_27_PULLDOWN, GPIO_27_SELECT}, + {GPIO_28_SELECT, GPIO_28_TYPE, GPO_28_LEVEL+GPIO_28_STICKY+GPIO_28_PULLUP+GPIO_28_PULLDOWN, GPIO_28_SELECT}, + {GPIO_29_SELECT, GPIO_29_TYPE, GPO_29_LEVEL+GPIO_29_STICKY+GPIO_29_PULLUP+GPIO_29_PULLDOWN, GPIO_29_SELECT}, + {GPIO_30_SELECT, GPIO_30_TYPE, GPO_30_LEVEL+GPIO_30_STICKY+GPIO_30_PULLUP+GPIO_30_PULLDOWN, GPIO_30_SELECT}, + {GPIO_31_SELECT, GPIO_31_TYPE, GPO_31_LEVEL+GPIO_31_STICKY+GPIO_31_PULLUP+GPIO_31_PULLDOWN, GPIO_31_SELECT}, + {GPIO_32_SELECT, GPIO_32_TYPE, GPO_32_LEVEL+GPIO_32_STICKY+GPIO_32_PULLUP+GPIO_32_PULLDOWN, GPIO_32_SELECT}, + {GPIO_33_SELECT, GPIO_33_TYPE, GPO_33_LEVEL+GPIO_33_STICKY+GPIO_33_PULLUP+GPIO_33_PULLDOWN, GPIO_33_SELECT}, + {GPIO_34_SELECT, GPIO_34_TYPE, GPO_34_LEVEL+GPIO_34_STICKY+GPIO_34_PULLUP+GPIO_34_PULLDOWN, GPIO_34_SELECT}, + {GPIO_35_SELECT, GPIO_35_TYPE, GPO_35_LEVEL+GPIO_35_STICKY+GPIO_35_PULLUP+GPIO_35_PULLDOWN, GPIO_35_SELECT}, + {GPIO_36_SELECT, GPIO_36_TYPE, GPO_36_LEVEL+GPIO_36_STICKY+GPIO_36_PULLUP+GPIO_36_PULLDOWN, GPIO_36_SELECT}, + {GPIO_37_SELECT, GPIO_37_TYPE, GPO_37_LEVEL+GPIO_37_STICKY+GPIO_37_PULLUP+GPIO_37_PULLDOWN, GPIO_37_SELECT}, + {GPIO_38_SELECT, GPIO_38_TYPE, GPO_38_LEVEL+GPIO_38_STICKY+GPIO_38_PULLUP+GPIO_38_PULLDOWN, GPIO_38_SELECT}, + {GPIO_39_SELECT, GPIO_39_TYPE, GPO_39_LEVEL+GPIO_39_STICKY+GPIO_39_PULLUP+GPIO_39_PULLDOWN, GPIO_39_SELECT}, + {GPIO_40_SELECT, GPIO_40_TYPE, GPO_40_LEVEL+GPIO_40_STICKY+GPIO_40_PULLUP+GPIO_40_PULLDOWN, GPIO_40_SELECT}, + {GPIO_41_SELECT, GPIO_41_TYPE, GPO_41_LEVEL+GPIO_41_STICKY+GPIO_41_PULLUP+GPIO_41_PULLDOWN, GPIO_41_SELECT}, + {GPIO_42_SELECT, GPIO_42_TYPE, GPO_42_LEVEL+GPIO_42_STICKY+GPIO_42_PULLUP+GPIO_42_PULLDOWN, GPIO_42_SELECT}, + {GPIO_43_SELECT, GPIO_43_TYPE, GPO_43_LEVEL+GPIO_43_STICKY+GPIO_43_PULLUP+GPIO_43_PULLDOWN, GPIO_43_SELECT}, + {GPIO_44_SELECT, GPIO_44_TYPE, GPO_44_LEVEL+GPIO_44_STICKY+GPIO_44_PULLUP+GPIO_44_PULLDOWN, GPIO_44_SELECT}, + {GPIO_45_SELECT, GPIO_45_TYPE, GPO_45_LEVEL+GPIO_45_STICKY+GPIO_45_PULLUP+GPIO_45_PULLDOWN, GPIO_45_SELECT}, + {GPIO_46_SELECT, GPIO_46_TYPE, GPO_46_LEVEL+GPIO_46_STICKY+GPIO_46_PULLUP+GPIO_46_PULLDOWN, GPIO_46_SELECT}, + {GPIO_47_SELECT, GPIO_47_TYPE, GPO_47_LEVEL+GPIO_47_STICKY+GPIO_47_PULLUP+GPIO_47_PULLDOWN, GPIO_47_SELECT}, + {GPIO_48_SELECT, GPIO_48_TYPE, GPO_48_LEVEL+GPIO_48_STICKY+GPIO_48_PULLUP+GPIO_48_PULLDOWN, GPIO_48_SELECT}, + {GPIO_49_SELECT, GPIO_49_TYPE, GPO_49_LEVEL+GPIO_49_STICKY+GPIO_49_PULLUP+GPIO_49_PULLDOWN, GPIO_49_SELECT}, + {GPIO_50_SELECT, GPIO_50_TYPE, GPO_50_LEVEL+GPIO_50_STICKY+GPIO_50_PULLUP+GPIO_50_PULLDOWN, GPIO_50_SELECT}, + {GPIO_51_SELECT, GPIO_51_TYPE, GPO_51_LEVEL+GPIO_51_STICKY+GPIO_51_PULLUP+GPIO_51_PULLDOWN, GPIO_51_SELECT}, + {GPIO_52_SELECT, GPIO_52_TYPE, GPO_52_LEVEL+GPIO_52_STICKY+GPIO_52_PULLUP+GPIO_52_PULLDOWN, GPIO_52_SELECT}, + {GPIO_53_SELECT, GPIO_53_TYPE, GPO_53_LEVEL+GPIO_53_STICKY+GPIO_53_PULLUP+GPIO_53_PULLDOWN, GPIO_53_SELECT}, + {GPIO_54_SELECT, GPIO_54_TYPE, GPO_54_LEVEL+GPIO_54_STICKY+GPIO_54_PULLUP+GPIO_54_PULLDOWN, GPIO_54_SELECT}, + {GPIO_55_SELECT, GPIO_55_TYPE, GPO_55_LEVEL+GPIO_55_STICKY+GPIO_55_PULLUP+GPIO_55_PULLDOWN, GPIO_55_SELECT}, + {GPIO_56_SELECT, GPIO_56_TYPE, GPO_56_LEVEL+GPIO_56_STICKY+GPIO_56_PULLUP+GPIO_56_PULLDOWN, GPIO_56_SELECT}, + {GPIO_57_SELECT, GPIO_57_TYPE, GPO_57_LEVEL+GPIO_57_STICKY+GPIO_57_PULLUP+GPIO_57_PULLDOWN, GPIO_57_SELECT}, + {GPIO_58_SELECT, GPIO_58_TYPE, GPO_58_LEVEL+GPIO_58_STICKY+GPIO_58_PULLUP+GPIO_58_PULLDOWN, GPIO_58_SELECT}, + {GPIO_59_SELECT, GPIO_59_TYPE, GPO_59_LEVEL+GPIO_59_STICKY+GPIO_59_PULLUP+GPIO_59_PULLDOWN, GPIO_59_SELECT}, + {GPIO_60_SELECT, GPIO_60_TYPE, GPO_60_LEVEL+GPIO_60_STICKY+GPIO_60_PULLUP+GPIO_60_PULLDOWN, GPIO_60_SELECT}, + {GPIO_61_SELECT, GPIO_61_TYPE, GPO_61_LEVEL+GPIO_61_STICKY+GPIO_61_PULLUP+GPIO_61_PULLDOWN, GPIO_61_SELECT}, + {GPIO_62_SELECT, GPIO_62_TYPE, GPO_62_LEVEL+GPIO_62_STICKY+GPIO_62_PULLUP+GPIO_62_PULLDOWN, GPIO_62_SELECT}, + {GPIO_63_SELECT, GPIO_63_TYPE, GPO_63_LEVEL+GPIO_63_STICKY+GPIO_63_PULLUP+GPIO_63_PULLDOWN, GPIO_63_SELECT}, + {GPIO_64_SELECT, GPIO_64_TYPE, GPO_64_LEVEL+GPIO_64_STICKY+GPIO_64_PULLUP+GPIO_64_PULLDOWN, GPIO_64_SELECT}, + {GPIO_65_SELECT, GPIO_65_TYPE, GPO_65_LEVEL+GPIO_65_STICKY+GPIO_65_PULLUP+GPIO_65_PULLDOWN, GPIO_65_SELECT}, + {GPIO_66_SELECT, GPIO_66_TYPE, GPO_66_LEVEL+GPIO_66_STICKY+GPIO_66_PULLUP+GPIO_66_PULLDOWN, GPIO_66_SELECT}, + {GPIO_67_SELECT, GPIO_67_TYPE, GPO_67_LEVEL+GPIO_67_STICKY+GPIO_67_PULLUP+GPIO_67_PULLDOWN, GPIO_67_SELECT}, + {GPIO_68_SELECT, GPIO_68_TYPE, GPO_68_LEVEL+GPIO_68_STICKY+GPIO_68_PULLUP+GPIO_68_PULLDOWN, GPIO_68_SELECT}, + {GPIO_69_SELECT, GPIO_69_TYPE, GPO_69_LEVEL+GPIO_69_STICKY+GPIO_69_PULLUP+GPIO_69_PULLDOWN, GPIO_69_SELECT}, + {GPIO_70_SELECT, GPIO_70_TYPE, GPO_70_LEVEL+GPIO_70_STICKY+GPIO_70_PULLUP+GPIO_70_PULLDOWN, GPIO_70_SELECT}, + {GPIO_71_SELECT, GPIO_71_TYPE, GPO_71_LEVEL+GPIO_71_STICKY+GPIO_71_PULLUP+GPIO_71_PULLDOWN, GPIO_71_SELECT}, + {GPIO_72_SELECT, GPIO_72_TYPE, GPO_72_LEVEL+GPIO_72_STICKY+GPIO_72_PULLUP+GPIO_72_PULLDOWN, GPIO_72_SELECT}, + {GPIO_73_SELECT, GPIO_73_TYPE, GPO_73_LEVEL+GPIO_73_STICKY+GPIO_73_PULLUP+GPIO_73_PULLDOWN, GPIO_73_SELECT}, + {GPIO_74_SELECT, GPIO_74_TYPE, GPO_74_LEVEL+GPIO_74_STICKY+GPIO_74_PULLUP+GPIO_74_PULLDOWN, GPIO_74_SELECT}, + {GPIO_75_SELECT, GPIO_75_TYPE, GPO_75_LEVEL+GPIO_75_STICKY+GPIO_75_PULLUP+GPIO_75_PULLDOWN, GPIO_75_SELECT}, + {GPIO_76_SELECT, GPIO_76_TYPE, GPO_76_LEVEL+GPIO_76_STICKY+GPIO_76_PULLUP+GPIO_76_PULLDOWN, GPIO_76_SELECT}, + {GPIO_77_SELECT, GPIO_77_TYPE, GPO_77_LEVEL+GPIO_77_STICKY+GPIO_77_PULLUP+GPIO_77_PULLDOWN, GPIO_77_SELECT}, + {GPIO_78_SELECT, GPIO_78_TYPE, GPO_78_LEVEL+GPIO_78_STICKY+GPIO_78_PULLUP+GPIO_78_PULLDOWN, GPIO_78_SELECT}, + {GPIO_79_SELECT, GPIO_79_TYPE, GPO_79_LEVEL+GPIO_79_STICKY+GPIO_79_PULLUP+GPIO_79_PULLDOWN, GPIO_79_SELECT}, + {GPIO_80_SELECT, GPIO_80_TYPE, GPO_80_LEVEL+GPIO_80_STICKY+GPIO_80_PULLUP+GPIO_80_PULLDOWN, GPIO_80_SELECT}, + {GPIO_81_SELECT, GPIO_81_TYPE, GPO_81_LEVEL+GPIO_81_STICKY+GPIO_81_PULLUP+GPIO_81_PULLDOWN, GPIO_81_SELECT}, + {GPIO_82_SELECT, GPIO_82_TYPE, GPO_82_LEVEL+GPIO_82_STICKY+GPIO_82_PULLUP+GPIO_82_PULLDOWN, GPIO_82_SELECT}, + {GPIO_83_SELECT, GPIO_83_TYPE, GPO_83_LEVEL+GPIO_83_STICKY+GPIO_83_PULLUP+GPIO_83_PULLDOWN, GPIO_83_SELECT}, + {GPIO_84_SELECT, GPIO_84_TYPE, GPO_84_LEVEL+GPIO_84_STICKY+GPIO_84_PULLUP+GPIO_84_PULLDOWN, GPIO_84_SELECT}, + {GPIO_85_SELECT, GPIO_85_TYPE, GPO_85_LEVEL+GPIO_85_STICKY+GPIO_85_PULLUP+GPIO_85_PULLDOWN, GPIO_85_SELECT}, + {GPIO_86_SELECT, GPIO_86_TYPE, GPO_86_LEVEL+GPIO_86_STICKY+GPIO_86_PULLUP+GPIO_86_PULLDOWN, GPIO_86_SELECT}, + {GPIO_87_SELECT, GPIO_87_TYPE, GPO_87_LEVEL+GPIO_87_STICKY+GPIO_87_PULLUP+GPIO_87_PULLDOWN, GPIO_87_SELECT}, + {GPIO_88_SELECT, GPIO_88_TYPE, GPO_88_LEVEL+GPIO_88_STICKY+GPIO_88_PULLUP+GPIO_88_PULLDOWN, GPIO_88_SELECT}, + {GPIO_89_SELECT, GPIO_89_TYPE, GPO_89_LEVEL+GPIO_89_STICKY+GPIO_89_PULLUP+GPIO_89_PULLDOWN, GPIO_89_SELECT}, + {GPIO_90_SELECT, GPIO_90_TYPE, GPO_90_LEVEL+GPIO_90_STICKY+GPIO_90_PULLUP+GPIO_90_PULLDOWN, GPIO_90_SELECT}, + {GPIO_91_SELECT, GPIO_91_TYPE, GPO_91_LEVEL+GPIO_91_STICKY+GPIO_91_PULLUP+GPIO_91_PULLDOWN, GPIO_91_SELECT}, + {GPIO_92_SELECT, GPIO_92_TYPE, GPO_92_LEVEL+GPIO_92_STICKY+GPIO_92_PULLUP+GPIO_92_PULLDOWN, GPIO_92_SELECT}, + {GPIO_93_SELECT, GPIO_93_TYPE, GPO_93_LEVEL+GPIO_93_STICKY+GPIO_93_PULLUP+GPIO_93_PULLDOWN, GPIO_93_SELECT}, + {GPIO_94_SELECT, GPIO_94_TYPE, GPO_94_LEVEL+GPIO_94_STICKY+GPIO_94_PULLUP+GPIO_94_PULLDOWN, GPIO_94_SELECT}, + {GPIO_95_SELECT, GPIO_95_TYPE, GPO_95_LEVEL+GPIO_95_STICKY+GPIO_95_PULLUP+GPIO_95_PULLDOWN, GPIO_95_SELECT}, + {GPIO_96_SELECT, GPIO_96_TYPE, GPO_96_LEVEL+GPIO_96_STICKY+GPIO_96_PULLUP+GPIO_96_PULLDOWN, GPIO_96_SELECT}, + {GPIO_97_SELECT, GPIO_97_TYPE, GPO_97_LEVEL+GPIO_97_STICKY+GPIO_97_PULLUP+GPIO_97_PULLDOWN, GPIO_97_SELECT}, + {GPIO_98_SELECT, GPIO_98_TYPE, GPO_98_LEVEL+GPIO_98_STICKY+GPIO_98_PULLUP+GPIO_98_PULLDOWN, GPIO_98_SELECT}, + {GPIO_99_SELECT, GPIO_99_TYPE, GPO_99_LEVEL+GPIO_99_STICKY+GPIO_99_PULLUP+GPIO_99_PULLDOWN, GPIO_99_SELECT}, + {GPIO_100_SELECT, GPIO_100_TYPE, GPO_100_LEVEL+GPIO_100_STICKY+GPIO_100_PULLUP+GPIO_100_PULLDOWN, GPIO_100_SELECT}, + {GPIO_101_SELECT, GPIO_101_TYPE, GPO_101_LEVEL+GPIO_101_STICKY+GPIO_101_PULLUP+GPIO_101_PULLDOWN, GPIO_101_SELECT}, + {GPIO_102_SELECT, GPIO_102_TYPE, GPO_102_LEVEL+GPIO_102_STICKY+GPIO_102_PULLUP+GPIO_102_PULLDOWN, GPIO_102_SELECT}, + {GPIO_103_SELECT, GPIO_103_TYPE, GPO_103_LEVEL+GPIO_103_STICKY+GPIO_103_PULLUP+GPIO_103_PULLDOWN, GPIO_103_SELECT}, + {GPIO_104_SELECT, GPIO_104_TYPE, GPO_104_LEVEL+GPIO_104_STICKY+GPIO_104_PULLUP+GPIO_104_PULLDOWN, GPIO_104_SELECT}, + {GPIO_105_SELECT, GPIO_105_TYPE, GPO_105_LEVEL+GPIO_105_STICKY+GPIO_105_PULLUP+GPIO_105_PULLDOWN, GPIO_105_SELECT}, + {GPIO_106_SELECT, GPIO_106_TYPE, GPO_106_LEVEL+GPIO_106_STICKY+GPIO_106_PULLUP+GPIO_106_PULLDOWN, GPIO_106_SELECT}, + {GPIO_107_SELECT, GPIO_107_TYPE, GPO_107_LEVEL+GPIO_107_STICKY+GPIO_107_PULLUP+GPIO_107_PULLDOWN, GPIO_107_SELECT}, + {GPIO_108_SELECT, GPIO_108_TYPE, GPO_108_LEVEL+GPIO_108_STICKY+GPIO_108_PULLUP+GPIO_108_PULLDOWN, GPIO_108_SELECT}, + {GPIO_109_SELECT, GPIO_109_TYPE, GPO_109_LEVEL+GPIO_109_STICKY+GPIO_109_PULLUP+GPIO_109_PULLDOWN, GPIO_109_SELECT}, + {GPIO_110_SELECT, GPIO_110_TYPE, GPO_110_LEVEL+GPIO_110_STICKY+GPIO_110_PULLUP+GPIO_110_PULLDOWN, GPIO_110_SELECT}, + {GPIO_111_SELECT, GPIO_111_TYPE, GPO_111_LEVEL+GPIO_111_STICKY+GPIO_111_PULLUP+GPIO_111_PULLDOWN, GPIO_111_SELECT}, + {GPIO_112_SELECT, GPIO_112_TYPE, GPO_112_LEVEL+GPIO_112_STICKY+GPIO_112_PULLUP+GPIO_112_PULLDOWN, GPIO_112_SELECT}, + {GPIO_113_SELECT, GPIO_113_TYPE, GPO_113_LEVEL+GPIO_113_STICKY+GPIO_113_PULLUP+GPIO_113_PULLDOWN, GPIO_113_SELECT}, + {GPIO_114_SELECT, GPIO_114_TYPE, GPO_114_LEVEL+GPIO_114_STICKY+GPIO_114_PULLUP+GPIO_114_PULLDOWN, GPIO_114_SELECT}, + {GPIO_115_SELECT, GPIO_115_TYPE, GPO_115_LEVEL+GPIO_115_STICKY+GPIO_115_PULLUP+GPIO_115_PULLDOWN, GPIO_115_SELECT}, + {GPIO_116_SELECT, GPIO_116_TYPE, GPO_116_LEVEL+GPIO_116_STICKY+GPIO_116_PULLUP+GPIO_116_PULLDOWN, GPIO_116_SELECT}, + {GPIO_117_SELECT, GPIO_117_TYPE, GPO_117_LEVEL+GPIO_117_STICKY+GPIO_117_PULLUP+GPIO_117_PULLDOWN, GPIO_117_SELECT}, + {GPIO_118_SELECT, GPIO_118_TYPE, GPO_118_LEVEL+GPIO_118_STICKY+GPIO_118_PULLUP+GPIO_118_PULLDOWN, GPIO_118_SELECT}, + {GPIO_119_SELECT, GPIO_119_TYPE, GPO_119_LEVEL+GPIO_119_STICKY+GPIO_119_PULLUP+GPIO_119_PULLDOWN, GPIO_119_SELECT}, + {GPIO_120_SELECT, GPIO_120_TYPE, GPO_120_LEVEL+GPIO_120_STICKY+GPIO_120_PULLUP+GPIO_120_PULLDOWN, GPIO_120_SELECT}, + {GPIO_121_SELECT, GPIO_121_TYPE, GPO_121_LEVEL+GPIO_121_STICKY+GPIO_121_PULLUP+GPIO_121_PULLDOWN, GPIO_121_SELECT}, + {GPIO_122_SELECT, GPIO_122_TYPE, GPO_122_LEVEL+GPIO_122_STICKY+GPIO_122_PULLUP+GPIO_122_PULLDOWN, GPIO_122_SELECT}, + {GPIO_123_SELECT, GPIO_123_TYPE, GPO_123_LEVEL+GPIO_123_STICKY+GPIO_123_PULLUP+GPIO_123_PULLDOWN, GPIO_123_SELECT}, + {GPIO_124_SELECT, GPIO_124_TYPE, GPO_124_LEVEL+GPIO_124_STICKY+GPIO_124_PULLUP+GPIO_124_PULLDOWN, GPIO_124_SELECT}, + {GPIO_125_SELECT, GPIO_125_TYPE, GPO_125_LEVEL+GPIO_125_STICKY+GPIO_125_PULLUP+GPIO_125_PULLDOWN, GPIO_125_SELECT}, + {GPIO_126_SELECT, GPIO_126_TYPE, GPO_126_LEVEL+GPIO_126_STICKY+GPIO_126_PULLUP+GPIO_126_PULLDOWN, GPIO_126_SELECT}, + {GPIO_127_SELECT, GPIO_127_TYPE, GPO_127_LEVEL+GPIO_127_STICKY+GPIO_127_PULLUP+GPIO_127_PULLDOWN, GPIO_127_SELECT}, + {GPIO_128_SELECT, GPIO_128_TYPE, GPO_128_LEVEL+GPIO_128_STICKY+GPIO_128_PULLUP+GPIO_128_PULLDOWN, GPIO_128_SELECT}, + {GPIO_129_SELECT, GPIO_129_TYPE, GPO_129_LEVEL+GPIO_129_STICKY+GPIO_129_PULLUP+GPIO_129_PULLDOWN, GPIO_129_SELECT}, + {GPIO_130_SELECT, GPIO_130_TYPE, GPO_130_LEVEL+GPIO_130_STICKY+GPIO_130_PULLUP+GPIO_130_PULLDOWN, GPIO_130_SELECT}, + {GPIO_131_SELECT, GPIO_131_TYPE, GPO_131_LEVEL+GPIO_131_STICKY+GPIO_131_PULLUP+GPIO_131_PULLDOWN, GPIO_131_SELECT}, + {GPIO_132_SELECT, GPIO_132_TYPE, GPO_132_LEVEL+GPIO_132_STICKY+GPIO_132_PULLUP+GPIO_132_PULLDOWN, GPIO_132_SELECT}, + {GPIO_133_SELECT, GPIO_133_TYPE, GPO_133_LEVEL+GPIO_133_STICKY+GPIO_133_PULLUP+GPIO_133_PULLDOWN, GPIO_133_SELECT}, + {GPIO_134_SELECT, GPIO_134_TYPE, GPO_134_LEVEL+GPIO_134_STICKY+GPIO_134_PULLUP+GPIO_134_PULLDOWN, GPIO_134_SELECT}, + {GPIO_135_SELECT, GPIO_135_TYPE, GPO_135_LEVEL+GPIO_135_STICKY+GPIO_135_PULLUP+GPIO_135_PULLDOWN, GPIO_135_SELECT}, + {GPIO_136_SELECT, GPIO_136_TYPE, GPO_136_LEVEL+GPIO_136_STICKY+GPIO_136_PULLUP+GPIO_136_PULLDOWN, GPIO_136_SELECT}, + {GPIO_137_SELECT, GPIO_137_TYPE, GPO_137_LEVEL+GPIO_137_STICKY+GPIO_137_PULLUP+GPIO_137_PULLDOWN, GPIO_137_SELECT}, + {GPIO_138_SELECT, GPIO_138_TYPE, GPO_138_LEVEL+GPIO_138_STICKY+GPIO_138_PULLUP+GPIO_138_PULLDOWN, GPIO_138_SELECT}, + {GPIO_139_SELECT, GPIO_139_TYPE, GPO_139_LEVEL+GPIO_139_STICKY+GPIO_139_PULLUP+GPIO_139_PULLDOWN, GPIO_139_SELECT}, + {GPIO_140_SELECT, GPIO_140_TYPE, GPO_140_LEVEL+GPIO_140_STICKY+GPIO_140_PULLUP+GPIO_140_PULLDOWN, GPIO_140_SELECT}, + {GPIO_141_SELECT, GPIO_141_TYPE, GPO_141_LEVEL+GPIO_141_STICKY+GPIO_141_PULLUP+GPIO_141_PULLDOWN, GPIO_141_SELECT}, + {GPIO_142_SELECT, GPIO_142_TYPE, GPO_142_LEVEL+GPIO_142_STICKY+GPIO_142_PULLUP+GPIO_142_PULLDOWN, GPIO_142_SELECT}, + {GPIO_143_SELECT, GPIO_143_TYPE, GPO_143_LEVEL+GPIO_143_STICKY+GPIO_143_PULLUP+GPIO_143_PULLDOWN, GPIO_143_SELECT}, + {GPIO_144_SELECT, GPIO_144_TYPE, GPO_144_LEVEL+GPIO_144_STICKY+GPIO_144_PULLUP+GPIO_144_PULLDOWN, GPIO_144_SELECT}, + {GPIO_145_SELECT, GPIO_145_TYPE, GPO_145_LEVEL+GPIO_145_STICKY+GPIO_145_PULLUP+GPIO_145_PULLDOWN, GPIO_145_SELECT}, + {GPIO_146_SELECT, GPIO_146_TYPE, GPO_146_LEVEL+GPIO_146_STICKY+GPIO_146_PULLUP+GPIO_146_PULLDOWN, GPIO_146_SELECT}, + {GPIO_147_SELECT, GPIO_147_TYPE, GPO_147_LEVEL+GPIO_147_STICKY+GPIO_147_PULLUP+GPIO_147_PULLDOWN, GPIO_147_SELECT}, + {GPIO_148_SELECT, GPIO_148_TYPE, GPO_148_LEVEL+GPIO_148_STICKY+GPIO_148_PULLUP+GPIO_148_PULLDOWN, GPIO_148_SELECT}, + {GPIO_149_SELECT, GPIO_149_TYPE, GPO_149_LEVEL+GPIO_149_STICKY+GPIO_149_PULLUP+GPIO_149_PULLDOWN, GPIO_149_SELECT}, + {GPIO_150_SELECT, GPIO_150_TYPE, GPO_150_LEVEL+GPIO_150_STICKY+GPIO_150_PULLUP+GPIO_150_PULLDOWN, GPIO_150_SELECT}, + {GPIO_151_SELECT, GPIO_151_TYPE, GPO_151_LEVEL+GPIO_151_STICKY+GPIO_151_PULLUP+GPIO_151_PULLDOWN, GPIO_151_SELECT}, + {GPIO_152_SELECT, GPIO_152_TYPE, GPO_152_LEVEL+GPIO_152_STICKY+GPIO_152_PULLUP+GPIO_152_PULLDOWN, GPIO_152_SELECT}, + {GPIO_153_SELECT, GPIO_153_TYPE, GPO_153_LEVEL+GPIO_153_STICKY+GPIO_153_PULLUP+GPIO_153_PULLDOWN, GPIO_153_SELECT}, + {GPIO_154_SELECT, GPIO_154_TYPE, GPO_154_LEVEL+GPIO_154_STICKY+GPIO_154_PULLUP+GPIO_154_PULLDOWN, GPIO_154_SELECT}, + {GPIO_155_SELECT, GPIO_155_TYPE, GPO_155_LEVEL+GPIO_155_STICKY+GPIO_155_PULLUP+GPIO_155_PULLDOWN, GPIO_155_SELECT}, + {GPIO_156_SELECT, GPIO_156_TYPE, GPO_156_LEVEL+GPIO_156_STICKY+GPIO_156_PULLUP+GPIO_156_PULLDOWN, GPIO_156_SELECT}, + {GPIO_157_SELECT, GPIO_157_TYPE, GPO_157_LEVEL+GPIO_157_STICKY+GPIO_157_PULLUP+GPIO_157_PULLDOWN, GPIO_157_SELECT}, + {GPIO_158_SELECT, GPIO_158_TYPE, GPO_158_LEVEL+GPIO_158_STICKY+GPIO_158_PULLUP+GPIO_158_PULLDOWN, GPIO_158_SELECT}, + {GPIO_159_SELECT, GPIO_159_TYPE, GPO_159_LEVEL+GPIO_159_STICKY+GPIO_159_PULLUP+GPIO_159_PULLDOWN, GPIO_159_SELECT}, + {GPIO_160_SELECT, GPIO_160_TYPE, GPO_160_LEVEL+GPIO_160_STICKY+GPIO_160_PULLUP+GPIO_160_PULLDOWN, GPIO_160_SELECT}, + {GPIO_161_SELECT, GPIO_161_TYPE, GPO_161_LEVEL+GPIO_161_STICKY+GPIO_161_PULLUP+GPIO_161_PULLDOWN, GPIO_161_SELECT}, + {GPIO_162_SELECT, GPIO_162_TYPE, GPO_162_LEVEL+GPIO_162_STICKY+GPIO_162_PULLUP+GPIO_162_PULLDOWN, GPIO_162_SELECT}, + {GPIO_163_SELECT, GPIO_163_TYPE, GPO_163_LEVEL+GPIO_163_STICKY+GPIO_163_PULLUP+GPIO_163_PULLDOWN, GPIO_163_SELECT}, + {GPIO_164_SELECT, GPIO_164_TYPE, GPO_164_LEVEL+GPIO_164_STICKY+GPIO_164_PULLUP+GPIO_164_PULLDOWN, GPIO_164_SELECT}, + {GPIO_165_SELECT, GPIO_165_TYPE, GPO_165_LEVEL+GPIO_165_STICKY+GPIO_165_PULLUP+GPIO_165_PULLDOWN, GPIO_165_SELECT}, + {GPIO_166_SELECT, GPIO_166_TYPE, GPO_166_LEVEL+GPIO_166_STICKY+GPIO_166_PULLUP+GPIO_166_PULLDOWN, GPIO_166_SELECT}, + {GPIO_167_SELECT, GPIO_167_TYPE, GPO_167_LEVEL+GPIO_167_STICKY+GPIO_167_PULLUP+GPIO_167_PULLDOWN, GPIO_167_SELECT}, + {GPIO_168_SELECT, GPIO_168_TYPE, GPO_168_LEVEL+GPIO_168_STICKY+GPIO_168_PULLUP+GPIO_168_PULLDOWN, GPIO_168_SELECT}, + {GPIO_169_SELECT, GPIO_169_TYPE, GPO_169_LEVEL+GPIO_169_STICKY+GPIO_169_PULLUP+GPIO_169_PULLDOWN, GPIO_169_SELECT}, + {GPIO_170_SELECT, GPIO_170_TYPE, GPO_170_LEVEL+GPIO_170_STICKY+GPIO_170_PULLUP+GPIO_170_PULLDOWN, GPIO_170_SELECT}, + {GPIO_171_SELECT, GPIO_171_TYPE, GPO_171_LEVEL+GPIO_171_STICKY+GPIO_171_PULLUP+GPIO_171_PULLDOWN, GPIO_171_SELECT}, + {GPIO_172_SELECT, GPIO_172_TYPE, GPO_172_LEVEL+GPIO_172_STICKY+GPIO_172_PULLUP+GPIO_172_PULLDOWN, GPIO_172_SELECT}, + {GPIO_173_SELECT, GPIO_173_TYPE, GPO_173_LEVEL+GPIO_173_STICKY+GPIO_173_PULLUP+GPIO_173_PULLDOWN, GPIO_173_SELECT}, + {GPIO_174_SELECT, GPIO_174_TYPE, GPO_174_LEVEL+GPIO_174_STICKY+GPIO_174_PULLUP+GPIO_174_PULLDOWN, GPIO_174_SELECT}, + {GPIO_175_SELECT, GPIO_175_TYPE, GPO_175_LEVEL+GPIO_175_STICKY+GPIO_175_PULLUP+GPIO_175_PULLDOWN, GPIO_175_SELECT}, + {GPIO_176_SELECT, GPIO_176_TYPE, GPO_176_LEVEL+GPIO_176_STICKY+GPIO_176_PULLUP+GPIO_176_PULLDOWN, GPIO_176_SELECT}, + {GPIO_177_SELECT, GPIO_177_TYPE, GPO_177_LEVEL+GPIO_177_STICKY+GPIO_177_PULLUP+GPIO_177_PULLDOWN, GPIO_177_SELECT}, + {GPIO_178_SELECT, GPIO_178_TYPE, GPO_178_LEVEL+GPIO_178_STICKY+GPIO_178_PULLUP+GPIO_178_PULLDOWN, GPIO_178_SELECT}, + {GPIO_179_SELECT, GPIO_179_TYPE, GPO_179_LEVEL+GPIO_179_STICKY+GPIO_179_PULLUP+GPIO_179_PULLDOWN, GPIO_179_SELECT}, + {GPIO_180_SELECT, GPIO_180_TYPE, GPO_180_LEVEL+GPIO_180_STICKY+GPIO_180_PULLUP+GPIO_180_PULLDOWN, GPIO_180_SELECT}, + {GPIO_181_SELECT, GPIO_181_TYPE, GPO_181_LEVEL+GPIO_181_STICKY+GPIO_181_PULLUP+GPIO_181_PULLDOWN, GPIO_181_SELECT}, + {GPIO_182_SELECT, GPIO_182_TYPE, GPO_182_LEVEL+GPIO_182_STICKY+GPIO_182_PULLUP+GPIO_182_PULLDOWN, GPIO_182_SELECT}, + {GPIO_183_SELECT, GPIO_183_TYPE, GPO_183_LEVEL+GPIO_183_STICKY+GPIO_183_PULLUP+GPIO_183_PULLDOWN, GPIO_183_SELECT}, + {GPIO_184_SELECT, GPIO_184_TYPE, GPO_184_LEVEL+GPIO_184_STICKY+GPIO_184_PULLUP+GPIO_184_PULLDOWN, GPIO_184_SELECT}, + {GPIO_185_SELECT, GPIO_185_TYPE, GPO_185_LEVEL+GPIO_185_STICKY+GPIO_185_PULLUP+GPIO_185_PULLDOWN, GPIO_185_SELECT}, + {GPIO_186_SELECT, GPIO_186_TYPE, GPO_186_LEVEL+GPIO_186_STICKY+GPIO_186_PULLUP+GPIO_186_PULLDOWN, GPIO_186_SELECT}, + {GPIO_187_SELECT, GPIO_187_TYPE, GPO_187_LEVEL+GPIO_187_STICKY+GPIO_187_PULLUP+GPIO_187_PULLDOWN, GPIO_187_SELECT}, + {GPIO_188_SELECT, GPIO_188_TYPE, GPO_188_LEVEL+GPIO_188_STICKY+GPIO_188_PULLUP+GPIO_188_PULLDOWN, GPIO_188_SELECT}, + {GPIO_189_SELECT, GPIO_189_TYPE, GPO_189_LEVEL+GPIO_189_STICKY+GPIO_189_PULLUP+GPIO_189_PULLDOWN, GPIO_189_SELECT}, + {GPIO_190_SELECT, GPIO_190_TYPE, GPO_190_LEVEL+GPIO_190_STICKY+GPIO_190_PULLUP+GPIO_190_PULLDOWN, GPIO_190_SELECT}, + {GPIO_191_SELECT, GPIO_191_TYPE, GPO_191_LEVEL+GPIO_191_STICKY+GPIO_191_PULLUP+GPIO_191_PULLDOWN, GPIO_191_SELECT}, + {GPIO_192_SELECT, GPIO_192_TYPE, GPO_192_LEVEL+GPIO_192_STICKY+GPIO_192_PULLUP+GPIO_192_PULLDOWN, GPIO_192_SELECT}, + {GPIO_193_SELECT, GPIO_193_TYPE, GPO_193_LEVEL+GPIO_193_STICKY+GPIO_193_PULLUP+GPIO_193_PULLDOWN, GPIO_193_SELECT}, + {GPIO_194_SELECT, GPIO_194_TYPE, GPO_194_LEVEL+GPIO_194_STICKY+GPIO_194_PULLUP+GPIO_194_PULLDOWN, GPIO_194_SELECT}, + {GPIO_195_SELECT, GPIO_195_TYPE, GPO_195_LEVEL+GPIO_195_STICKY+GPIO_195_PULLUP+GPIO_195_PULLDOWN, GPIO_195_SELECT}, + {GPIO_196_SELECT, GPIO_196_TYPE, GPO_196_LEVEL+GPIO_196_STICKY+GPIO_196_PULLUP+GPIO_196_PULLDOWN, GPIO_196_SELECT}, + {GPIO_197_SELECT, GPIO_197_TYPE, GPO_197_LEVEL+GPIO_197_STICKY+GPIO_197_PULLUP+GPIO_197_PULLDOWN, GPIO_197_SELECT}, + {GPIO_198_SELECT, GPIO_198_TYPE, GPO_198_LEVEL+GPIO_198_STICKY+GPIO_198_PULLUP+GPIO_198_PULLDOWN, GPIO_198_SELECT}, + {GPIO_199_SELECT, GPIO_199_TYPE, GPO_199_LEVEL+GPIO_199_STICKY+GPIO_199_PULLUP+GPIO_199_PULLDOWN, GPIO_199_SELECT}, + {GPIO_200_SELECT, GPIO_200_TYPE, GPO_200_LEVEL+GPIO_200_STICKY+GPIO_200_PULLUP+GPIO_200_PULLDOWN, GPIO_200_SELECT}, + {GPIO_201_SELECT, GPIO_201_TYPE, GPO_201_LEVEL+GPIO_201_STICKY+GPIO_201_PULLUP+GPIO_201_PULLDOWN, GPIO_201_SELECT}, + {GPIO_202_SELECT, GPIO_202_TYPE, GPO_202_LEVEL+GPIO_202_STICKY+GPIO_202_PULLUP+GPIO_202_PULLDOWN, GPIO_202_SELECT}, + {GPIO_203_SELECT, GPIO_203_TYPE, GPO_203_LEVEL+GPIO_203_STICKY+GPIO_203_PULLUP+GPIO_203_PULLDOWN, GPIO_203_SELECT}, + {GPIO_204_SELECT, GPIO_204_TYPE, GPO_204_LEVEL+GPIO_204_STICKY+GPIO_204_PULLUP+GPIO_204_PULLDOWN, GPIO_204_SELECT}, + {GPIO_205_SELECT, GPIO_205_TYPE, GPO_205_LEVEL+GPIO_205_STICKY+GPIO_205_PULLUP+GPIO_205_PULLDOWN, GPIO_205_SELECT}, + {GPIO_206_SELECT, GPIO_206_TYPE, GPO_206_LEVEL+GPIO_206_STICKY+GPIO_206_PULLUP+GPIO_206_PULLDOWN, GPIO_206_SELECT}, + {GPIO_207_SELECT, GPIO_207_TYPE, GPO_207_LEVEL+GPIO_207_STICKY+GPIO_207_PULLUP+GPIO_207_PULLDOWN, GPIO_207_SELECT}, + {GPIO_208_SELECT, GPIO_208_TYPE, GPO_208_LEVEL+GPIO_208_STICKY+GPIO_208_PULLUP+GPIO_208_PULLDOWN, GPIO_208_SELECT}, + {GPIO_209_SELECT, GPIO_209_TYPE, GPO_209_LEVEL+GPIO_209_STICKY+GPIO_209_PULLUP+GPIO_209_PULLDOWN, GPIO_209_SELECT}, + {GPIO_210_SELECT, GPIO_210_TYPE, GPO_210_LEVEL+GPIO_210_STICKY+GPIO_210_PULLUP+GPIO_210_PULLDOWN, GPIO_210_SELECT}, + {GPIO_211_SELECT, GPIO_211_TYPE, GPO_211_LEVEL+GPIO_211_STICKY+GPIO_211_PULLUP+GPIO_211_PULLDOWN, GPIO_211_SELECT}, + {GPIO_212_SELECT, GPIO_212_TYPE, GPO_212_LEVEL+GPIO_212_STICKY+GPIO_212_PULLUP+GPIO_212_PULLDOWN, GPIO_212_SELECT}, + {GPIO_213_SELECT, GPIO_213_TYPE, GPO_213_LEVEL+GPIO_213_STICKY+GPIO_213_PULLUP+GPIO_213_PULLDOWN, GPIO_213_SELECT}, + {GPIO_214_SELECT, GPIO_214_TYPE, GPO_214_LEVEL+GPIO_214_STICKY+GPIO_214_PULLUP+GPIO_214_PULLDOWN, GPIO_214_SELECT}, + {GPIO_215_SELECT, GPIO_215_TYPE, GPO_215_LEVEL+GPIO_215_STICKY+GPIO_215_PULLUP+GPIO_215_PULLDOWN, GPIO_215_SELECT}, + {GPIO_216_SELECT, GPIO_216_TYPE, GPO_216_LEVEL+GPIO_216_STICKY+GPIO_216_PULLUP+GPIO_216_PULLDOWN, GPIO_216_SELECT}, + {GPIO_217_SELECT, GPIO_217_TYPE, GPO_217_LEVEL+GPIO_217_STICKY+GPIO_217_PULLUP+GPIO_217_PULLDOWN, GPIO_217_SELECT}, + {GPIO_218_SELECT, GPIO_218_TYPE, GPO_218_LEVEL+GPIO_218_STICKY+GPIO_218_PULLUP+GPIO_218_PULLDOWN, GPIO_218_SELECT}, + {GPIO_219_SELECT, GPIO_219_TYPE, GPO_219_LEVEL+GPIO_219_STICKY+GPIO_219_PULLUP+GPIO_219_PULLDOWN, GPIO_219_SELECT}, + {GPIO_220_SELECT, GPIO_220_TYPE, GPO_220_LEVEL+GPIO_220_STICKY+GPIO_220_PULLUP+GPIO_220_PULLDOWN, GPIO_220_SELECT}, + {GPIO_221_SELECT, GPIO_221_TYPE, GPO_221_LEVEL+GPIO_221_STICKY+GPIO_221_PULLUP+GPIO_221_PULLDOWN, GPIO_221_SELECT}, + {GPIO_222_SELECT, GPIO_222_TYPE, GPO_222_LEVEL+GPIO_222_STICKY+GPIO_222_PULLUP+GPIO_222_PULLDOWN, GPIO_222_SELECT}, + {GPIO_223_SELECT, GPIO_223_TYPE, GPO_223_LEVEL+GPIO_223_STICKY+GPIO_223_PULLUP+GPIO_223_PULLDOWN, GPIO_223_SELECT}, + {GPIO_224_SELECT, GPIO_224_TYPE, GPO_224_LEVEL+GPIO_224_STICKY+GPIO_224_PULLUP+GPIO_224_PULLDOWN, GPIO_224_SELECT}, + {GPIO_225_SELECT, GPIO_225_TYPE, GPO_225_LEVEL+GPIO_225_STICKY+GPIO_225_PULLUP+GPIO_225_PULLDOWN, GPIO_225_SELECT}, + {GPIO_226_SELECT, GPIO_226_TYPE, GPO_226_LEVEL+GPIO_226_STICKY+GPIO_226_PULLUP+GPIO_226_PULLDOWN, GPIO_226_SELECT}, + {GPIO_227_SELECT, GPIO_227_TYPE, GPO_227_LEVEL+GPIO_227_STICKY+GPIO_227_PULLUP+GPIO_227_PULLDOWN, GPIO_227_SELECT}, + {GPIO_228_SELECT, GPIO_228_TYPE, GPO_228_LEVEL+GPIO_228_STICKY+GPIO_228_PULLUP+GPIO_228_PULLDOWN, GPIO_228_SELECT}, + {GPIO_229_SELECT, GPIO_229_TYPE, GPO_229_LEVEL+GPIO_229_STICKY+GPIO_229_PULLUP+GPIO_229_PULLDOWN, GPIO_229_SELECT}, +}; + +typedef enum _GEVENT_COUNT +{ + GEVENT_00=0x60, + GEVENT_01, + GEVENT_02, + GEVENT_03, + GEVENT_04, + GEVENT_05, + GEVENT_06, + GEVENT_07, + GEVENT_08, + GEVENT_09, + GEVENT_10, + GEVENT_11, + GEVENT_12, + GEVENT_13, + GEVENT_14, + GEVENT_15, + GEVENT_16, + GEVENT_17, + GEVENT_18, + GEVENT_19, + GEVENT_20, + GEVENT_21, + GEVENT_22, + GEVENT_23 +} GEVENT_COUNT; + +typedef struct _GEVENT_SETTINGS +{ + u8 EventEnable; // 0: Disable, 1: Enable + u8 SciTrig; // 0: Falling Edge, 1: Rising Edge + u8 SciLevl; // 0: Edge trigger, 1: Level Trigger + u8 SmiSciEn; // 0: Not send SMI, 1: Send SMI + u8 SciS0En; // 0: Disable, 1: Enable + u8 SciMap; // 0000b->1111b + u8 SmiTrig; // 0: Active Low, 1: Active High + u8 SmiControl; // 0: Disable, 1: SMI 2: NMI 3: IRQ13 +} GEVENT_SETTINGS; + +GEVENT_SETTINGS gevent_table[] = +{ + {GEVENT_00_EVENTENABLE, GEVENT_00_SCITRIG, GEVENT_00_SCILEVEL, GEVENT_00_SMISCIEN, GEVENT_00_SCIS0EN, GEVENT_00_SCIMAP, GEVENT_00_SMITRIG, GEVENT_00_SMICONTROL}, + {GEVENT_01_EVENTENABLE, GEVENT_01_SCITRIG, GEVENT_01_SCILEVEL, GEVENT_01_SMISCIEN, GEVENT_01_SCIS0EN, GEVENT_01_SCIMAP, GEVENT_01_SMITRIG, GEVENT_01_SMICONTROL}, + {GEVENT_02_EVENTENABLE, GEVENT_02_SCITRIG, GEVENT_02_SCILEVEL, GEVENT_02_SMISCIEN, GEVENT_02_SCIS0EN, GEVENT_02_SCIMAP, GEVENT_02_SMITRIG, GEVENT_02_SMICONTROL}, + {GEVENT_03_EVENTENABLE, GEVENT_03_SCITRIG, GEVENT_03_SCILEVEL, GEVENT_03_SMISCIEN, GEVENT_03_SCIS0EN, GEVENT_03_SCIMAP, GEVENT_03_SMITRIG, GEVENT_03_SMICONTROL}, + {GEVENT_04_EVENTENABLE, GEVENT_04_SCITRIG, GEVENT_04_SCILEVEL, GEVENT_04_SMISCIEN, GEVENT_04_SCIS0EN, GEVENT_04_SCIMAP, GEVENT_04_SMITRIG, GEVENT_04_SMICONTROL}, + {GEVENT_05_EVENTENABLE, GEVENT_05_SCITRIG, GEVENT_05_SCILEVEL, GEVENT_05_SMISCIEN, GEVENT_05_SCIS0EN, GEVENT_05_SCIMAP, GEVENT_05_SMITRIG, GEVENT_05_SMICONTROL}, + {GEVENT_06_EVENTENABLE, GEVENT_06_SCITRIG, GEVENT_06_SCILEVEL, GEVENT_06_SMISCIEN, GEVENT_06_SCIS0EN, GEVENT_06_SCIMAP, GEVENT_06_SMITRIG, GEVENT_06_SMICONTROL}, + {GEVENT_07_EVENTENABLE, GEVENT_07_SCITRIG, GEVENT_07_SCILEVEL, GEVENT_07_SMISCIEN, GEVENT_07_SCIS0EN, GEVENT_07_SCIMAP, GEVENT_07_SMITRIG, GEVENT_07_SMICONTROL}, + {GEVENT_08_EVENTENABLE, GEVENT_08_SCITRIG, GEVENT_08_SCILEVEL, GEVENT_08_SMISCIEN, GEVENT_08_SCIS0EN, GEVENT_08_SCIMAP, GEVENT_08_SMITRIG, GEVENT_08_SMICONTROL}, + {GEVENT_09_EVENTENABLE, GEVENT_09_SCITRIG, GEVENT_09_SCILEVEL, GEVENT_09_SMISCIEN, GEVENT_09_SCIS0EN, GEVENT_09_SCIMAP, GEVENT_09_SMITRIG, GEVENT_09_SMICONTROL}, + {GEVENT_10_EVENTENABLE, GEVENT_10_SCITRIG, GEVENT_10_SCILEVEL, GEVENT_10_SMISCIEN, GEVENT_10_SCIS0EN, GEVENT_10_SCIMAP, GEVENT_10_SMITRIG, GEVENT_10_SMICONTROL}, + {GEVENT_11_EVENTENABLE, GEVENT_11_SCITRIG, GEVENT_11_SCILEVEL, GEVENT_11_SMISCIEN, GEVENT_11_SCIS0EN, GEVENT_11_SCIMAP, GEVENT_11_SMITRIG, GEVENT_11_SMICONTROL}, + {GEVENT_12_EVENTENABLE, GEVENT_12_SCITRIG, GEVENT_12_SCILEVEL, GEVENT_12_SMISCIEN, GEVENT_12_SCIS0EN, GEVENT_12_SCIMAP, GEVENT_12_SMITRIG, GEVENT_12_SMICONTROL}, + {GEVENT_13_EVENTENABLE, GEVENT_13_SCITRIG, GEVENT_13_SCILEVEL, GEVENT_13_SMISCIEN, GEVENT_13_SCIS0EN, GEVENT_13_SCIMAP, GEVENT_13_SMITRIG, GEVENT_13_SMICONTROL}, + {GEVENT_14_EVENTENABLE, GEVENT_14_SCITRIG, GEVENT_14_SCILEVEL, GEVENT_14_SMISCIEN, GEVENT_14_SCIS0EN, GEVENT_14_SCIMAP, GEVENT_14_SMITRIG, GEVENT_14_SMICONTROL}, + {GEVENT_15_EVENTENABLE, GEVENT_15_SCITRIG, GEVENT_15_SCILEVEL, GEVENT_15_SMISCIEN, GEVENT_15_SCIS0EN, GEVENT_15_SCIMAP, GEVENT_15_SMITRIG, GEVENT_15_SMICONTROL}, + {GEVENT_16_EVENTENABLE, GEVENT_16_SCITRIG, GEVENT_16_SCILEVEL, GEVENT_16_SMISCIEN, GEVENT_16_SCIS0EN, GEVENT_16_SCIMAP, GEVENT_16_SMITRIG, GEVENT_16_SMICONTROL}, + {GEVENT_17_EVENTENABLE, GEVENT_17_SCITRIG, GEVENT_17_SCILEVEL, GEVENT_17_SMISCIEN, GEVENT_17_SCIS0EN, GEVENT_17_SCIMAP, GEVENT_17_SMITRIG, GEVENT_17_SMICONTROL}, + {GEVENT_18_EVENTENABLE, GEVENT_18_SCITRIG, GEVENT_18_SCILEVEL, GEVENT_18_SMISCIEN, GEVENT_18_SCIS0EN, GEVENT_18_SCIMAP, GEVENT_18_SMITRIG, GEVENT_18_SMICONTROL}, + {GEVENT_19_EVENTENABLE, GEVENT_19_SCITRIG, GEVENT_19_SCILEVEL, GEVENT_19_SMISCIEN, GEVENT_19_SCIS0EN, GEVENT_19_SCIMAP, GEVENT_19_SMITRIG, GEVENT_19_SMICONTROL}, + {GEVENT_20_EVENTENABLE, GEVENT_20_SCITRIG, GEVENT_20_SCILEVEL, GEVENT_20_SMISCIEN, GEVENT_20_SCIS0EN, GEVENT_20_SCIMAP, GEVENT_20_SMITRIG, GEVENT_20_SMICONTROL}, + {GEVENT_21_EVENTENABLE, GEVENT_21_SCITRIG, GEVENT_21_SCILEVEL, GEVENT_21_SMISCIEN, GEVENT_21_SCIS0EN, GEVENT_21_SCIMAP, GEVENT_21_SMITRIG, GEVENT_21_SMICONTROL}, + {GEVENT_22_EVENTENABLE, GEVENT_22_SCITRIG, GEVENT_22_SCILEVEL, GEVENT_22_SMISCIEN, GEVENT_22_SCIS0EN, GEVENT_22_SCIMAP, GEVENT_22_SMITRIG, GEVENT_22_SMICONTROL}, + {GEVENT_23_EVENTENABLE, GEVENT_23_SCITRIG, GEVENT_23_SCILEVEL, GEVENT_23_SMISCIEN, GEVENT_23_SCIS0EN, GEVENT_23_SCIMAP, GEVENT_23_SMITRIG, GEVENT_23_SMICONTROL}, +}; + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*--------------------------------------------------------------------------------------- + * L O C A L F U N C T I O N S + *--------------------------------------------------------------------------------------- + */ + +#endif diff --git a/src/mainboard/amd/dinar/irq_tables.c b/src/mainboard/amd/dinar/irq_tables.c new file mode 100644 index 0000000..afd8c67 --- /dev/null +++ b/src/mainboard/amd/dinar/irq_tables.c @@ -0,0 +1,122 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + + + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} +extern u8 bus_isa; +extern u8 bus_sb700[2]; +extern unsigned long sbdn_sb700; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_sb700[0]; + pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + + /* pci bridge */ + write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + + + + slot_num++; + + + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; + +} diff --git a/src/mainboard/amd/dinar/mainboard.c b/src/mainboard/amd/dinar/mainboard.c new file mode 100644 index 0000000..9d10390 --- /dev/null +++ b/src/mainboard/amd/dinar/mainboard.c @@ -0,0 +1,138 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <boot/tables.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include <NbPlatform.h> +#include "chip.h" + +#define ONE_MB 0x100000 +//#define SMBUS_IO_BASE 0x6000 + +void set_pcie_reset(void *nbconfig); +void set_pcie_dereset(void *nbconfig); + +/** + * TODO + * SB CIMx callback + */ +void set_pcie_reset(void *nbconfig) +{ +} + +/** + * Mainboard specific RD890 CIMx callback + * Release Resets to PCIe Links + * SR5690 PCIE_RESET_GPIO1,2,3,4 to reset pcie + */ +void set_pcie_dereset(void *nbconfig) +{ + //u32 nb_dev = MAKE_SBDFO(0, 0x0, 0x0, 0x0, 0x0); + u32 i; + u32 val; + u32 nb_addr; + + val = 0x00000007UL; + AMD_NB_CONFIG_BLOCK *pConfig = (AMD_NB_CONFIG_BLOCK*)nbconfig; + for (i = 0; i < MAX_NB_COUNT; i ++) { + nb_addr = pConfig->Northbridges[i].NbPciAddress.AddressValue | NB_HTIU_INDEX; + LibNbPciIndexRMW(nb_addr, + NB_HTIU_REGA8, + AccessS3SaveWidth32, + ~val, + val, + &(pConfig->Northbridges[i])); + } +} + +uint64_t uma_memory_base, uma_memory_size; + +/************************************************* + * enable the dedicated function in dinar board. + *************************************************/ +static void dinar_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard Dinar Enable. dev=0x%p\n", dev); +#if (CONFIG_GFXUMA == 1) + msr_t msr, msr2; + uint32_t sys_mem; + + /* TOP_MEM: the top of DRAM below 4G */ + msr = rdmsr(TOP_MEM); + printk + (BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", + __func__, msr.lo, msr.hi); + + /* TOP_MEM2: the top of DRAM above 4G */ + msr2 = rdmsr(TOP_MEM2); + printk (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", + __func__, msr2.lo, msr2.hi); + + /* refer to UMA Size Consideration in Family15h BKDG. */ + /* Please reference MemNGetUmaSizeOR () */ + /* + * Total system memory UMASize + * >= 2G 512M + * >=1G 256M + * <1G 64M + */ + sys_mem = msr.lo + 16 * ONE_MB; // Ignore 16MB allocated for C6 when finding UMA size + if ((msr2.hi & 0x0000000F) || (sys_mem >= 2048 * ONE_MB)) { + uma_memory_size = 512 * ONE_MB; + } else if (sys_mem >= 1024 * ONE_MB) { + uma_memory_size = 256 * ONE_MB; + } else { + uma_memory_size = 64 * ONE_MB; + } + uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ + + printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", + __func__, uma_memory_size, uma_memory_base); + + /* TODO: TOP_MEM2 */ +#else + uma_memory_size = 256 * ONE_MB; /* 256M recommended UMA */ + uma_memory_base = 768 * ONE_MB; /* 1GB system memory supported */ +#endif + +} + +int add_mainboard_resources(struct lb_memory *mem) +{ + /* UMA is removed from system memory in the northbridge code, but + * in some circumstances we want the memory mentioned as reserved. + */ +#if (CONFIG_GFXUMA == 1) + printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", + uma_memory_base, uma_memory_size); + lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, + uma_memory_size); +#endif + return 0; +} +struct chip_operations mainboard_ops = { + CHIP_NAME("AMD DINAR Mainboard") + .enable_dev = dinar_enable, +}; diff --git a/src/mainboard/amd/dinar/mptable.c b/src/mainboard/amd/dinar/mptable.c new file mode 100644 index 0000000..b43080d --- /dev/null +++ b/src/mainboard/amd/dinar/mptable.c @@ -0,0 +1,180 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> + +extern u8 bus_rd890[14]; +extern u8 bus_sb700[2]; +extern u32 bus_type[256]; +extern u32 sbdn_rd890; +extern u32 sbdn_sb700; + + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + u32 apicid_sb700; + u32 apicid_rd890; + device_t dev; + u32 dword; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + mptable_init(mc, LAPIC_ADDR); + + smp_write_processors(mc); + get_bus_conf(); + mptable_write_buses(mc, NULL, &bus_isa); + + /* + * AGESA v5 Apply apic enumeration rules + * For systems with >= 16 APICs, put the IO-APICs at 0..n and + * put the local-APICs at m..z + * For systems with < 16 APICs, put the Local-APICs at 0..n and + * put the IO-APICs at (n + 1)..z + */ +#if CONFIG_MAX_CPUS >= 16 + apicid_sb700 = 0x0; +#else + apicid_sb700 = CONFIG_MAX_CPUS + 1 +#endif + apicid_rd890 = apicid_sb700 + 1; + + //bus_sb700[0], TODO: why bus_sb700[0] use same value of bus_rd890[0] assigned by get_pci1234(), instead of 0. + dev = dev_find_slot(0, PCI_DEVFN(sbdn_sb700 + 0x14, 0)); + if (dev) { + /* Set sb700 IOAPIC ID */ + dword = pci_read_config32(dev, 0x74) & 0xfffffff0; + smp_write_ioapic(mc, apicid_sb700, 0x20, dword); + + /* + * 00:12.0: PROG SATA : INT F + * 00:13.0: INTA USB_0 + * 00:13.1: INTB USB_1 + * 00:13.2: INTC USB_2 + * 00:13.3: INTD USB_3 + * 00:13.4: INTC USB_4 + * 00:13.5: INTD USB2 + * 00:14.1: INTA IDE + * 00:14.2: Prog HDA : INT E + * 00:14.5: INTB ACI + * 00:14.6: INTB MCI + */ + + /* Set RS5650 IOAPIC ID */ + dev = dev_find_slot(0, PCI_DEVFN(0, 0)); + if (dev) { + pci_write_config32(dev, 0xF8, 0x1); + dword = pci_read_config32(dev, 0xFC) & 0xfffffff0; + smp_write_ioapic(mc, apicid_rd890, 0x20, dword); + } + + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, int_sign, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), apicid_sb700, (pin)) + + /* SMBUS */ + //PCI_INT(0x0, 0x14, 0x0, 0x10); //not generate interrupt, 3Ch hardcoded to 0 + + /* HD Audio */ + PCI_INT(0x0, 0x14, 0x2, 0x10); + + /* USB */ + /* OHCI0, OHCI1 hard-wired to 01h, corresponding to using INTA# */ + /* EHCI hard-wired to 02h, corresponding to using INTB# */ + /* USB1 */ + PCI_INT(0x0, 0x12, 0x0, 0x10); /* OHCI0 Port 0~2 */ + PCI_INT(0x0, 0x12, 0x1, 0x10); /* OHCI1 Port 3~5 */ + PCI_INT(0x0, 0x12, 0x2, 0x11); /* EHCI Port 0~5 */ + + /* USB2 */ + PCI_INT(0x0, 0x13, 0x0, 0x10); /* OHCI0 Port 6~8 */ + PCI_INT(0x0, 0x13, 0x1, 0x10); /* OHCI1 Port 9~11 */ + PCI_INT(0x0, 0x13, 0x2, 0x11); /* EHCI Port 6~11 */ + + /* USB3 EHCI hard-wired to 03h, corresponding to using INTC# */ + PCI_INT(0x0, 0x14, 0x5, 0x12); /* OHCI0 Port 12~13 */ + + /* SATA */ + PCI_INT(0x0, 0x11, 0x0, 0x16); //6, INTG + + /* on board NIC & Slot PCIE. */ + /* configuration B doesnt need dev 5,6,7 */ + /* + * PCI_INT(bus_rd890[0x5], 0x0, 0x0, 0x11); + * PCI_INT(bus_rd890[0x6], 0x0, 0x0, 0x12); + * PCI_INT(bus_rd890[0x7], 0x0, 0x0, 0x13); + */ + + //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0, (((13)<<2)|(0)), apicid_rd890, 28); /* dev d */ + //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_rd890[13], (((0)<<2)|(1)), apicid_rd890, 0); /* card behind dev13 */ + + /* PCI slots */ + /* PCI_SLOT 0. */ + PCI_INT(bus_sb700[1], 0x5, 0x0, 0x14); + PCI_INT(bus_sb700[1], 0x5, 0x1, 0x15); + PCI_INT(bus_sb700[1], 0x5, 0x2, 0x16); + PCI_INT(bus_sb700[1], 0x5, 0x3, 0x17); + + /* PCI_SLOT 1. */ + PCI_INT(bus_sb700[1], 0x6, 0x0, 0x15); + PCI_INT(bus_sb700[1], 0x6, 0x1, 0x16); + PCI_INT(bus_sb700[1], 0x6, 0x2, 0x17); + PCI_INT(bus_sb700[1], 0x6, 0x3, 0x14); + + /* PCI_SLOT 2. */ + PCI_INT(bus_sb700[1], 0x7, 0x0, 0x16); + PCI_INT(bus_sb700[1], 0x7, 0x1, 0x17); + PCI_INT(bus_sb700[1], 0x7, 0x2, 0x14); + PCI_INT(bus_sb700[1], 0x7, 0x3, 0x15); + + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/amd/dinar/platform_cfg.h b/src/mainboard/amd/dinar/platform_cfg.h new file mode 100644 index 0000000..8265f87 --- /dev/null +++ b/src/mainboard/amd/dinar/platform_cfg.h @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _PLATFORM_CFG_H_ +#define _PLATFORM_CFG_H_ + + +/* northbridge customize options */ +/** + * Max number of northbridges in the system + */ +#define MAX_NB_COUNT 1 //TODO: only 1 NB tested + +/** + * Enable check for PCIe endpoint to be ready for PCI enumeration. + * + */ +//#define EPREADY_WORKAROUND_DISABLED + +/** + * Enable IOMMU support. Initialize IOMMU subsystem, generate IVRS ACPI table. + * + */ +#define IOMMU_SUPPORT_DISABLE //TODO: enable it + +/** + * Disable server PCIe hotplug support. + */ + +//#define HOTPLUG_SUPPORT_DISABLED + +/** + * Disable support for device number remapping for PCIe portsserver PCIe hotplug support. + */ + +//#define DEVICE_REMAP_DISABLE + +#endif //_PLATFORM_CFG_H_ diff --git a/src/mainboard/amd/dinar/rd890_cfg.c b/src/mainboard/amd/dinar/rd890_cfg.c new file mode 100644 index 0000000..9518691 --- /dev/null +++ b/src/mainboard/amd/dinar/rd890_cfg.c @@ -0,0 +1,274 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "NbPlatform.h" +#include "rd890_cfg.h" +#include "northbridge/amd/cimx/rd890/chip.h" +#include "nbInitializer.h" +#include <string.h> +#include <arch/ioapic.h> + +#ifndef __PRE_RAM__ +#include <device/device.h> +extern void set_pcie_reset(void *config); +extern void set_pcie_dereset(void *config); + +/** + * Platform dependent configuration at ramstage + */ +static void nb_platform_config(device_t nb_dev, AMD_NB_CONFIG *NbConfigPtr) +{ + u16 i; + PCIE_CONFIG *pPcieConfig = NbConfigPtr->pPcieConfig; + //AMD_NB_CONFIG_BLOCK *ConfigPtr = GET_BLOCK_CONFIG_PTR(NbConfigPtr); + struct northbridge_amd_cimx_rd890_config *rd890_info = NULL; + DEFAULT_PLATFORM_CONFIG(platform_config); + + /* update the platform depentent configuration by devicetree */ + rd890_info = nb_dev->chip_info; + platform_config.PortEnableMap = rd890_info->port_enable; + if (rd890_info->gpp1_configuration == 0) { + platform_config.Gpp1Config = GFX_CONFIG_AAAA; + } else if (rd890_info->gpp1_configuration == 1) { + platform_config.Gpp1Config = GFX_CONFIG_AABB; + } + if (rd890_info->gpp2_configuration == 0) { + platform_config.Gpp2Config = GFX_CONFIG_AAAA; + } else if (rd890_info->gpp2_configuration == 1) { + platform_config.Gpp2Config = GFX_CONFIG_AABB; + } + platform_config.Gpp3aConfig = rd890_info->gpp3a_configuration; + + if (platform_config.Gpp1Config != 0) { + pPcieConfig->CoreConfiguration[0] = platform_config.Gpp1Config; + } + if (platform_config.Gpp2Config != 0) { + pPcieConfig->CoreConfiguration[1] = platform_config.Gpp2Config; + } + if (platform_config.Gpp3aConfig != 0) { + pPcieConfig->CoreConfiguration[2] = platform_config.Gpp3aConfig; + } + + pPcieConfig->TempMmioBaseAddress = (UINT16)(platform_config.TemporaryMmio >> 20); + for (i = 0; i <= MAX_CORE_ID; i++) { + NbConfigPtr->pPcieConfig->CoreSetting[i].SkipConfiguration = OFF; + NbConfigPtr->pPcieConfig->CoreSetting[i].PerformanceMode = OFF; + } + for (i = MIN_PORT_ID; i <= MAX_PORT_ID; i++) { + NbConfigPtr->pPcieConfig->PortConfiguration[i].PortLinkMode = PcieLinkModeGen2; + } + + for (i = MIN_PORT_ID; i <= MAX_PORT_ID; i++) { + if ((platform_config.PortEnableMap & (1 << i)) != 0) { + pPcieConfig->PortConfiguration[i].PortPresent = ON; + if ((platform_config.PortGen1Map & (1 << i)) != 0) { + pPcieConfig->PortConfiguration[i].PortLinkMode = PcieLinkModeGen1; + } + if ((platform_config.PortHotplugMap & (1 << i)) != 0) { + u16 j; + pPcieConfig->PortConfiguration[j].PortHotplug = ON; /* Enable Hotplug */ + /* Set Hotplug descriptor info */ + for (j = 0; j < 8; j++) { + u32 PortDescriptor; + PortDescriptor = platform_config.PortHotplugDescriptors[j]; + if ((PortDescriptor & 0xF) == j) { + pPcieConfig->ExtPortConfiguration[j].PortHotplugDevMap = (PortDescriptor >> 4) & 3; + pPcieConfig->ExtPortConfiguration[j].PortHotplugByteMap = (PortDescriptor >> 6) & 1; + break; + } + } + } + } + } +} +#endif // __PRE_RAM__ + +/** + * @brief Entry point of Northbridge CIMx callout/CallBack + * + * prototype AGESA_STATUS (*CALLOUT_ENTRY) (UINT32 Param1, UINTN Param2, VOID* ConfigPtr); + * + * @param[in] u32 func Northbridge CIMx CallBackId + * @param[in] u32 data Northbridge Input Data. + * @param[in] AMD_NB_CONFIG *config Northbridge configuration structure pointer. + * + */ +static u32 rd890_callout_entry(u32 func, u32 data, void *config) +{ + u32 ret = 0; +#ifndef __PRE_RAM__ + device_t nb_dev = (device_t)data; +#endif + AMD_NB_CONFIG *nbConfigPtr = (AMD_NB_CONFIG*)config; + + switch (func) { + case PHCB_AmdPortTrainingCompleted: + break; + + case PHCB_AmdPortResetDeassert: +#ifndef __PRE_RAM__ + set_pcie_dereset(config); +#endif + break; + + case PHCB_AmdPortResetAssert: +#ifndef __PRE_RAM__ + set_pcie_reset(config); +#endif + break; + + case PHCB_AmdPortResetSupported: + break; + case PHCB_AmdGeneratePciReset: + break; + case PHCB_AmdGetExclusionTable: + break; + case PHCB_AmdAllocateBuffer: + break; + case PHCB_AmdUpdateApicInterruptMapping: + break; + case PHCB_AmdFreeBuffer: + break; + case PHCB_AmdLocateBuffer: + break; + case PHCB_AmdReportEvent: + break; + case PHCB_AmdPcieAsmpInfo: + break; + + case CB_AmdSetNbPorConfig: + break; + case CB_AmdSetHtConfig: + /*TODO: different HT path and deempasis for each NB */ + nbConfigPtr->pHtConfig->NbTransmitterDeemphasis = DEFAULT_HT_DEEMPASIES; + + break; + case CB_AmdSetPcieEarlyConfig: +#ifndef __PRE_RAM__ + nb_platform_config(nb_dev, nbConfigPtr); +#endif + break; + + case CB_AmdSetEarlyPostConfig: + break; + + case CB_AmdSetMidPostConfig: + nbConfigPtr->pNbConfig->IoApicBaseAddress = RD890_IOAPIC_ADDR; +#ifndef IOMMU_SUPPORT_DISABLE //TODO enable iommu + /* SBIOS must alloc 16K memory for IOMMU MMIO */ + UINT32 MmcfgBarAddress; //using default IOmmuBaseAddress + LibNbPciRead(nbConfigPtr->NbPciAddress.AddressValue | 0x1C, + AccessWidth32, + &MmcfgBarAddress, + nbConfigPtr); + MmcfgBarAddress &= ~0xf; + if (MmcfgBarAddress != 0) { + nbConfigPtr->IommuBaseAddress = MmcfgBarAddress; + } + nbConfigPtr->IommuBaseAddress = 0; //disable iommu +#endif + break; + + case CB_AmdSetLatePostConfig: + break; + + case CB_AmdSetRecoveryConfig: + break; + } + + return ret; +} + + +/** + * @brief North Bridge CIMx configuration + * + * should be called before exeucte CIMx function. + * this function will be called in romstage and ramstage. + */ +void rd890_cimx_config(AMD_NB_CONFIG_BLOCK *pConfig, NB_CONFIG *nbConfig, HT_CONFIG *htConfig, PCIE_CONFIG *pcieConfig) +{ + u16 i = 0; + PCI_ADDR PciAddress; + u32 val, sbNode, sbLink; + + if (!pConfig) { + return; + } + + memset(pConfig, 0, sizeof(AMD_NB_CONFIG_BLOCK)); + for (i = 0; i < MAX_NB_COUNT; i++) { + pConfig->Northbridges[i].pNbConfig = &nbConfig[i]; + pConfig->Northbridges[i].pHtConfig = &htConfig[i]; + pConfig->Northbridges[i].pPcieConfig = &pcieConfig[i]; + pConfig->Northbridges[i].ConfigPtr = &pConfig; + } + + /* Initialize all NB structures */ + AmdInitializer(pConfig); + + pConfig->NumberOfNorthbridges = MAX_NB_COUNT - 1; /* Support limited to primary NB only located at 0:0:0 */ + //pConfig->StandardHeader.ImageBasePtr = CIMX_B2_IMAGE_BASE_ADDRESS; + pConfig->StandardHeader.PcieBasePtr = (VOID *)PCIEX_BASE_ADDRESS; + pConfig->StandardHeader.CalloutPtr = &rd890_callout_entry; + + /* + * PCI Address to Access NB. Depends on HT topology and configuration for multi NB platform. + * Always 0:0:0 on single NB platform. + */ + pConfig->Northbridges[0].NbPciAddress.AddressValue = MAKE_SBDFO(0, 0x0, 0x0, 0x0, 0x0); + + /* Set HT path to NB by SbNode and SbLink */ + PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x60); + LibNbPciRead(PciAddress.AddressValue, AccessWidth32, &val, &(pConfig->Northbridges[0])); + sbNode = (val >> 8) & 0x07; + PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x64); + LibNbPciRead(PciAddress.AddressValue, AccessWidth32, &val, &(pConfig->Northbridges[0])); + sbLink = (val >> 8) & 0x07; //assum ganged + pConfig->Northbridges[0].NbHtPath.NodeID = sbNode; + pConfig->Northbridges[0].NbHtPath.LinkID = sbLink; + //TODO: other NBs + +#ifndef __PRE_RAM__ + /* If temporrary MMIO enable set up CPU MMIO */ + for (i = 0; i <= pConfig->NumberOfNorthbridges; i++) { + UINT32 MmioBase; + UINT32 LinkId; + UINT32 SubLinkId; + MmioBase = pConfig->Northbridges[i].pPcieConfig->TempMmioBaseAddress; + if (MmioBase != 0) { + LinkId = pConfig->Northbridges[i].NbHtPath.LinkID & 0xf; + SubLinkId = ((pConfig->Northbridges[i].NbHtPath.LinkID & 0xF0) == 0x20) ? 1 : 0; + /* Set Limit */ + LibNbPciRMW(MAKE_SBDFO (0, 0, 0x18, 0x1, (i * 4) + 0x84), + AccessWidth32, + 0x0, + ((MmioBase << 12) + 0xF00) | (LinkId << 4) | (SubLinkId << 6), + &(pConfig->Northbridges[i])); + /* Set Base */ + LibNbPciRMW(MAKE_SBDFO (0, 0, 0x18, 0x1, (i * 4) + 0x80), + AccessWidth32, + 0x0, + (MmioBase << 12) | 0x3, + &(pConfig->Northbridges[i])); + } + } +#endif +} + diff --git a/src/mainboard/amd/dinar/rd890_cfg.h b/src/mainboard/amd/dinar/rd890_cfg.h new file mode 100644 index 0000000..a4f4e1a --- /dev/null +++ b/src/mainboard/amd/dinar/rd890_cfg.h @@ -0,0 +1,175 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _RD890_CFG_H_ +#define _RD890_CFG_H_ + +#include "NbPlatform.h" + +#define RD890_IOAPIC_ADDR 0xC8000000 +/* platform dependent configuration default value */ + +/** + * Path from CPU to NB + * [0..7] - Node (0..8) + * [8..11] - Link (0..3) + * [12..15] - Sublink (1..2), If NB connected to full link than Sublink should be set to 0. + */ +#ifndef DEFAULT_HT_PATH +#if CONFIG_CPU_AMD_AGESA_FAMILY10 == 1 +#define DEFAULT_HT_PATH {0x0, 0x3} +#endif +#if CONFIG_CPU_AMD_AGESA_FAMILY15 == 1 +#define DEFAULT_HT_PATH {0x0, 0x1} +#endif +#endif + +/** + * Bitmap of enabled ports on NB #0/1/2/3 + * Bit[0] - Reserved + * Bit[1] - Reserved + * Bit[2] - Enable PCIe port 2 + * Bit[3] - Enable PCIe port 3 + * Bit[4] - Enable PCIe port 4 + * Bit[5] - Enable PCIe port 5 + * Bit[6] - Enable PCIe port 2 + * Bit[7] - Enable PCIe port 7 + * Bit[8] - Reserved + * Bit[9] - Enable PCIe port 9 + * Bit[10]- Enable PCIe port 10 + * Bit[11]- Enable PCIe port 11 + * Bit[12]- Enable PCIe port 12 + * Bit[13]- Enable PCIe port 13 + * Example: + * port_enable = 0x14 + * Port 2 and 4 enabled for training/initialization + */ +#ifndef DEFAULT_PORT_ENABLE_MAP +#define DEFAULT_PORT_ENABLE_MAP 0x0014 +#endif + +/** + * Bitmap of ports that have slot or onboard device connected. + * Example force PCIe Gen1 supporton port 2 and 4 (DEFAULT_PORT_ENABLE_MAP = BIT2 | BIT4) + * #define DEFAULT_PORT_FORCE_GEN1 0x604 + */ +#ifndef DEFAULT_PORT_FORCE_GEN1 +#define DEFAULT_PORT_FORCE_GEN1 0x0 +#endif + +/** + * Bitmap of ports that have server hotplug support + */ +#ifndef DEFAULT_HOTPLUG_SUPPORT +#define DEFAULT_HOTPLUG_SUPPORT 0x0 +#endif + +#ifndef DEFAULT_HOTPLUG_DESCRIPTOR +#define DEFAULT_HOTPLUG_DESCRIPTOR {0, 0, 0, 0, 0, 0, 0, 0} +#endif + +#ifndef DEFAULT_TEMPMMIO_BASE_ADDRESS +#define DEFAULT_TEMPMMIO_BASE_ADDRESS 0xD0000000 +#endif + +/** + * Default GPP1 core configuraton on NB #0/1/2/3. + * 2 x8 slot, GFX_CONFIG_AABB + * 1 x16 slot, GFX_CONFIG_AAAA + */ +#ifndef DEFAULT_GPP1_CONFIG +#define DEFAULT_GPP1_CONFIG GFX_CONFIG_AABB +#endif + +/** + * Default GPP2 core configuraton on NB #0/1/2/3. + * 2 x8 slot, GFX_CONFIG_AABB + * 1 x16 slot, GFX_CONFIG_AAAA + */ +#ifndef DEFAULT_GPP2_CONFIG +#define DEFAULT_GPP2_CONFIG GFX_CONFIG_AABB +#endif + +/** + * Default GPP3a core configuraton on NB #0/1/2/3. + * 4:2:0:0:0:0 - GPP_CONFIG_GPP420000, 0x1 + * 4:1:1:0:0:0 - GPP_CONFIG_GPP411000, 0x2 + * 2:2:2:0:0:0 - GPP_CONFIG_GPP222000, 0x3 + * 2:2:1:1:0:0 - GPP_CONFIG_GPP221100, 0x4 + * 2:1:1:1:1:0 - GPP_CONFIG_GPP211110, 0x5 + * 1:1:1:1:1:1 - GPP_CONFIG_GPP111111, 0x6 + */ +#ifndef DEFAULT_GPP3A_CONFIG +#define DEFAULT_GPP3A_CONFIG GPP_CONFIG_GPP111111 +#endif + + +/** + * Default HT Transmitter de-emphasis setting + */ +#ifndef DEFAULT_HT_DEEMPASIES +#define DEFAULT_HT_DEEMPASIES 0x3 +#endif + +/** + * Default APIC nterrupt base for IOAPIC + */ +#ifndef DEFAULT_APIC_INTERRUPT_BASE +#define DEFAULT_APIC_INTERRUPT_BASE 24 +#endif + + +#define DEFAULT_PLATFORM_CONFIG(name) \ + NB_PLATFORM_CONFIG name = { \ + DEFAULT_PORT_ENABLE_MAP, \ + DEFAULT_PORT_FORCE_GEN1, \ + DEFAULT_HOTPLUG_SUPPORT, \ + DEFAULT_HOTPLUG_DESCRIPTOR, \ + DEFAULT_TEMPMMIO_BASE_ADDRESS, \ + DEFAULT_GPP1_CONFIG, \ + DEFAULT_GPP2_CONFIG, \ + DEFAULT_GPP3A_CONFIG, \ + DEFAULT_HT_DEEMPASIES, \ + /*DEFAULT_HT_PATH,*/ \ + DEFAULT_APIC_INTERRUPT_BASE, \ + } + +/** + * Platform configuration + */ +typedef struct { + UINT16 PortEnableMap; ///< Bitmap of enabled ports + UINT16 PortGen1Map; ///< Bitmap of ports to disable Gen2 + UINT16 PortHotplugMap; ///< Bitmap of ports support hotplug + UINT8 PortHotplugDescriptors[8];///< Ports Hotplug descriptors + UINT32 TemporaryMmio; ///< Temporary MMIO + UINT32 Gpp1Config; ///< Default PCIe GFX core configuration + UINT32 Gpp2Config; ///< Default PCIe GPP2 core configuration + UINT32 Gpp3aConfig; ///< Default PCIe GPP3a core configuration + UINT8 NbTransmitterDeemphasis; ///< HT transmitter de-emphasis level + // HT_PATH NbHtPath; ///< HT path to NB + UINT8 GlobalApicInterruptBase; ///< Global APIC interrupt base that is used in MADT table for IO APIC. +} NB_PLATFORM_CONFIG; + +/** + * Bridge CIMx configuration + */ +void rd890_cimx_config(AMD_NB_CONFIG_BLOCK *pConfig, NB_CONFIG *nbConfig, HT_CONFIG *htConfig, PCIE_CONFIG *pcieConfig); + +#endif //_RD890_CFG_H_ diff --git a/src/mainboard/amd/dinar/reset.c b/src/mainboard/amd/dinar/reset.c new file mode 100644 index 0000000..4cc1efd --- /dev/null +++ b/src/mainboard/amd/dinar/reset.c @@ -0,0 +1,66 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <reset.h> +#include <arch/io.h> /*inb, outb*/ +#include <arch/romcc_io.h> /*pci_read_config32, device_t, PCI_DEV*/ + +#define HT_INIT_CONTROL 0x6C +#define HTIC_BIOSR_Detect (1<<5) + +#if CONFIG_MAX_PHYSICAL_CPUS > 32 +#define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn))) +#else +#define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn) +#endif + +static inline void set_bios_reset(void) +{ + u32 nodes; + u32 htic; + device_t dev; + int i; + + nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1; + for(i = 0; i < nodes; i++) { + dev = NODE_PCI(i, 0); + htic = pci_read_config32(dev, HT_INIT_CONTROL); + htic &= ~HTIC_BIOSR_Detect; + pci_write_config32(dev, HT_INIT_CONTROL, htic); + } +} + +void hard_reset(void) +{ + set_bios_reset(); + /* Try rebooting through port 0xcf9 */ + /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */ + outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9); + outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9); +} + +//SbReset(); +void soft_reset(void) +{ + set_bios_reset(); + /* link reset */ + outb(0x06, 0x0cf9); +} + diff --git a/src/mainboard/amd/dinar/romstage.c b/src/mainboard/amd/dinar/romstage.c new file mode 100644 index 0000000..6f3911a --- /dev/null +++ b/src/mainboard/amd/dinar/romstage.c @@ -0,0 +1,162 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <console/loglevel.h> +#include "cpu/x86/bist.h" +#include "superio/smsc/sch4037/sch4037_early_init.c" +#include "superio/smsc/sio1036/sio1036_early_init.c" +#include "cpu/x86/lapic/boot_cpu.c" +#include "pc80/i8254.c" +#include "pc80/i8259.c" +#include "nb_cimx.h" +#include "sb_cimx.h" +#include "Platform.h" +#include <arch/cpu.h> + +#define SERIAL_DEV PNP_DEV(CONFIG_SIO_PORT, SMSCSUPERIO_SP1) + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx); +u32 agesawrapper_amdinitmmio (void); +u32 agesawrapper_amdinitreset (void); +u32 agesawrapper_amdinitearly (void); +u32 agesawrapper_amdinitenv (void); +u32 agesawrapper_amdinitlate (void); +u32 agesawrapper_amdinitpost (void); +u32 agesawrapper_amdinitmid (void); + + + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val; + + if (!cpu_init_detectedx && boot_cpu()) { + + post_code(0x30); + + sch4037_early_init (CONFIG_SIO_PORT); + + /* Detect SMSC SIO1036 LPC Debug Card status */ + if (detect_sio1036_chip(0x4E)) { + /* Found SMSC SIO1036 LPC Debug Card */ + sio1036_early_init(0x4E); + } + + post_code(0x31); + uart_init(); + console_init(); + + /* + * SR5650/5670/5690 RD890 chipset, read pci config space hang at POR, + * Disable all Pcie Bridges to work around It. + */ + sr56x0_rd890_disable_pcie_bridge(); + + } + + post_code(0x32); + val = agesawrapper_amdinitmmio(); + if (val) { + printk(BIOS_DEBUG, "agesawrapper_amdinitmmio failed: %x \n", val); + } else { + printk(BIOS_DEBUG, "agesawrapper_amdinitmmio passed\n"); + } + + /* Halt if there was a built in self test failure */ + post_code(0x33); + report_bist_failure(bist); + + // Load MPB + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx); + + if(boot_cpu()) { + post_code(0x34); + sb_Poweron_Init(); + } + + post_code(0x35); + val = agesawrapper_amdinitreset(); + if (val) { + printk(BIOS_DEBUG, "agesawrapper_amdinitreset failed: %x \n", val); + } else { + printk(BIOS_DEBUG, "agesawrapper_amdinitreset passed\n"); + } + + post_code(0x36); + val = agesawrapper_amdinitearly (); + if (val) { + printk(BIOS_DEBUG, "agesawrapper_amdinitearly failed: %x \n", val); + } else { + printk(BIOS_DEBUG, "agesawrapper_amdinitearly passed\n"); + } + + post_code(0x37); + nb_Poweron_Init(); + post_code(0x38); + nb_Ht_Init(); + + + post_code(0x39); + val = agesawrapper_amdinitpost (); + if (val) { + printk(BIOS_DEBUG, "agesawrapper_amdinitpost failed: %x \n", val); + } else { + printk(BIOS_DEBUG, "agesawrapper_amdinitpost passed\n"); + } + + post_code(0x40); + val = agesawrapper_amdinitenv (); + if (val) { + printk(BIOS_DEBUG, "agesawrapper_amdinitenv failed: %x \n", val); + } else { + printk(BIOS_DEBUG, "agesawrapper_amdinitenv passed\n"); + } + + + /* Initialize i8259 pic */ + post_code(0x41); + setup_i8259 (); + + /* Initialize i8254 timers */ + post_code(0x42); + setup_i8254 (); + + post_code(0x43); + print_debug("Disabling cache as ram "); + disable_cache_as_ram(); + print_debug("done\n"); + + post_code(0x44); + copy_and_run(0); + + post_code(0x45); // Should never see this post code. +} + diff --git a/src/mainboard/amd/dinar/sb700_cfg.c b/src/mainboard/amd/dinar/sb700_cfg.c new file mode 100644 index 0000000..b2f3d17 --- /dev/null +++ b/src/mainboard/amd/dinar/sb700_cfg.c @@ -0,0 +1,142 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <string.h> +#include <console/console.h> /* printk */ +#include "Platform.h" +#include "sb700_cfg.h" + + +/** + * @brief South Bridge CIMx configuration + * + * should be called before exeucte CIMx function. + * this function will be called in romstage and ramstage. + */ +void sb700_cimx_config(AMDSBCFG *sb_config) +{ + if (!sb_config) { + printk(BIOS_DEBUG, "SB700 - Cfg.c - %s - No sb_config.\n", __func__); + return; + } + printk(BIOS_DEBUG, "SB700 - Cfg.c - %s - Start.\n", __func__); + memset(sb_config, 0, sizeof(AMDSBCFG)); + + /* SB_POWERON_INIT */ + sb_config->StdHeader.Func = SB_POWERON_INIT; + + /* header */ + sb_config->StdHeader.pPcieBase = PCIEX_BASE_ADDRESS; + + /* static Build Parameters */ + sb_config->BuildParameters.BiosSize = BIOS_SIZE; + sb_config->BuildParameters.LegacyFree = LEGACY_FREE; + sb_config->BuildParameters.EcKbd = 0; + sb_config->BuildParameters.EcChannel0 = 0; + sb_config->BuildParameters.Smbus0BaseAddress = SMBUS0_BASE_ADDRESS; + sb_config->BuildParameters.Smbus1BaseAddress = SMBUS1_BASE_ADDRESS; + sb_config->BuildParameters.SioPmeBaseAddress = SIO_PME_BASE_ADDRESS; + sb_config->BuildParameters.WatchDogTimerBase = WATCHDOG_TIMER_BASE_ADDRESS; + sb_config->BuildParameters.SpiRomBaseAddress = SPI_BASE_ADDRESS; + + sb_config->BuildParameters.AcpiPm1EvtBlkAddr = PM1_EVT_BLK_ADDRESS; + sb_config->BuildParameters.AcpiPm1CntBlkAddr = PM1_CNT_BLK_ADDRESS; + sb_config->BuildParameters.AcpiPmTmrBlkAddr = PM1_TMR_BLK_ADDRESS; + sb_config->BuildParameters.CpuControlBlkAddr = CPU_CNT_BLK_ADDRESS; + sb_config->BuildParameters.AcpiGpe0BlkAddr = GPE0_BLK_ADDRESS; + sb_config->BuildParameters.SmiCmdPortAddr = SMI_CMD_PORT; + sb_config->BuildParameters.AcpiPmaCntBlkAddr = ACPI_PMA_CNT_BLK_ADDRESS; + + sb_config->BuildParameters.SataIDESsid = SATA_IDE_MODE_SSID; + sb_config->BuildParameters.SataRAIDSsid = SATA_RAID_MODE_SSID; + sb_config->BuildParameters.SataRAID5Ssid = SATA_RAID5_MODE_SSID; + sb_config->BuildParameters.SataAHCISsid = SATA_AHCI_SSID; + sb_config->BuildParameters.Ohci0Ssid = OHCI0_SSID; + sb_config->BuildParameters.Ohci1Ssid = OHCI1_SSID; + sb_config->BuildParameters.Ohci2Ssid = OHCI2_SSID; + sb_config->BuildParameters.Ohci3Ssid = OHCI3_SSID; + sb_config->BuildParameters.Ohci4Ssid = OHCI4_SSID; + sb_config->BuildParameters.Ehci0Ssid = EHCI0_SSID; + sb_config->BuildParameters.Ehci1Ssid = EHCI1_SSID; + sb_config->BuildParameters.SmbusSsid = SMBUS_SSID; + sb_config->BuildParameters.IdeSsid = IDE_SSID; + sb_config->BuildParameters.AzaliaSsid = AZALIA_SSID; + sb_config->BuildParameters.LpcSsid = LPC_SSID; + + sb_config->BuildParameters.HpetBase = HPET_BASE_ADDRESS; + + /* General */ + sb_config->Spi33Mhz = 1; + sb_config->SpreadSpectrum = 0; + sb_config->PciClk5 = 0; + sb_config->PciClks = 0x1F; + sb_config->ResetCpuOnSyncFlood = 1; // Do not reset CPU on sync flood + sb_config->TimerClockSource = 2; // Auto + sb_config->S3Resume = 0; + sb_config->RebootRequired = 0; + + /* HPET */ + sb_config->HpetTimer = HPET_TIMER; + + /* USB */ + sb_config->UsbIntClock = 0; // Use external clock + sb_config->Usb1Ohci0 = 1; //0:disable 1:enable Bus 0 Dev 18 Func0 + sb_config->Usb1Ohci1 = 1; //0:disable 1:enable Bus 0 Dev 18 Func1 + sb_config->Usb1Ehci = 1; //0:disable 1:enable Bus 0 Dev 18 Func2 + sb_config->Usb2Ohci0 = 1; //0:disable 1:enable Bus 0 Dev 19 Func0 + sb_config->Usb2Ohci1 = 1; //0:disable 1:enable Bus 0 Dev 19 Func1 + sb_config->Usb2Ehci = 1; //0:disable 1:enable Bus 0 Dev 19 Func2 + sb_config->Usb3Ohci = 1; //0:disable 1:enable Bus 0 Dev 20 Func5 + sb_config->UsbOhciLegacyEmulation = 1; //0:Enable 1:Disable + + sb_config->AcpiS1Supported = 1; + + /* SATA */ + sb_config->SataController = 1; + sb_config->SataClass = CONFIG_SATA_CONTROLLER_MODE; //0 native, 1 raid, 2 ahci + sb_config->SataSmbus = 0; + sb_config->SataAggrLinkPmCap = 1; + sb_config->SataPortMultCap = 1; + sb_config->SataClkAutoOff = 1; + sb_config->SataIdeCombMdPriSecOpt = 0; //0 -IDE as primary, 1 -IDE as secondary. + //TODO: set to secondary not take effect. + sb_config->SataIdeCombinedMode = 0; //1 IDE controlor exposed and combined mode enabled, 0 disabled + sb_config->SataEspPort = 0; + sb_config->SataClkAutoOffAhciMode = 1; + sb_config->SataHpcpButNonESP = 0; + sb_config->SataHideUnusedPort = 0; + + /* Azalia HDA */ + sb_config->AzaliaController = AZALIA_CONTROLLER; + sb_config->AzaliaPinCfg = AZALIA_PIN_CONFIG; + sb_config->AzaliaSdin0 = AZALIA_SDIN_PIN; + sb_config->pAzaliaOemCodecTablePtr = NULL; + +#ifndef __PRE_RAM__ + /* ramstage cimx config here */ + if (!sb_config->StdHeader.pCallBack) { + sb_config->StdHeader.pCallBack = sb700_callout_entry; + } + + //sb_config-> +#endif //!__PRE_RAM__ + printk(BIOS_DEBUG, "SB700 - Cfg.c - %s - End.\n", __func__); +} + diff --git a/src/mainboard/amd/dinar/sb700_cfg.h b/src/mainboard/amd/dinar/sb700_cfg.h new file mode 100644 index 0000000..b405f0e --- /dev/null +++ b/src/mainboard/amd/dinar/sb700_cfg.h @@ -0,0 +1,237 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#ifndef _SB700_CFG_H_ +#define _SB700_CFG_H_ + +#include <stdint.h> + + +/** + * @def BIOS_SIZE_1M + * @def BIOS_SIZE_2M + * @def BIOS_SIZE_4M + * @def BIOS_SIZE_8M + */ +#define BIOS_SIZE_1M 0 +#define BIOS_SIZE_2M 1 +#define BIOS_SIZE_4M 3 +#define BIOS_SIZE_8M 7 + +/* In SB700, default ROM size is 1M Bytes, if your platform ROM + * bigger than 1M you have to set the ROM size outside CIMx module and + * before AGESA module get call. + */ +#ifndef BIOS_SIZE +#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1 +#define BIOS_SIZE BIOS_SIZE_1M +#elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 +#define BIOS_SIZE BIOS_SIZE_2M +#elif CONFIG_COREBOOT_ROMSIZE_KB_4096 == 1 +#define BIOS_SIZE BIOS_SIZE_4M +#elif CONFIG_COREBOOT_ROMSIZE_KB_8192 == 1 +#define BIOS_SIZE BIOS_SIZE_8M +#endif +#endif + +/** + * @def SPREAD_SPECTRUM + * @brief + * 0 - Disable Spread Spectrum function + * 1 - Enable Spread Spectrum function + */ +#define SPREAD_SPECTRUM 0 + +/** + * @def SB_HPET_TIMER + * @breif + * 0 - Disable hpet + * 1 - Enable hpet + */ +#define HPET_TIMER 1 + +/** + * @def USB_CONFIG + * @brief bit[0-6] used to control USB + * 0 - Disable + * 1 - Enable + * Usb Ohci1 Contoller (Bus 0 Dev 18 Func0) is define at BIT0 + * Usb Ehci1 Contoller (Bus 0 Dev 18 Func2) is define at BIT1 + * Usb Ohci2 Contoller (Bus 0 Dev 19 Func0) is define at BIT2 + * Usb Ehci2 Contoller (Bus 0 Dev 19 Func2) is define at BIT3 + * Usb Ohci3 Contoller (Bus 0 Dev 22 Func0) is define at BIT4 + * Usb Ehci3 Contoller (Bus 0 Dev 22 Func2) is define at BIT5 + * Usb Ohci4 Contoller (Bus 0 Dev 20 Func5) is define at BIT6 + */ +#define USB_CINFIG 0x7F + +/** + * @def PCI_CLOCK_CTRL + * @breif bit[0-4] used for PCI Slots Clock Control, + * 0 - disable + * 1 - enable + * PCI SLOT 0 define at BIT0 + * PCI SLOT 1 define at BIT1 + * PCI SLOT 2 define at BIT2 + * PCI SLOT 3 define at BIT3 + * PCI SLOT 4 define at BIT4 + */ +#define PCI_CLOCK_CTRL 0x1F + +/** + * @def SATA_CONTROLLER + * @breif INCHIP Sata Controller + */ +#ifndef SATA_CONTROLLER +#define SATA_CONTROLLER 1 +#endif + +/** + * @def SATA_MODE + * @breif INCHIP Sata Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#ifndef SATA_MODE +#define SATA_MODE NATIVE_IDE_MODE +#endif + +/** + * @breif INCHIP Sata IDE Controller Mode + */ +#define IDE_LEGACY_MODE 0 +#define IDE_NATIVE_MODE 1 + +/** + * @def SATA_IDE_MODE + * @breif INCHIP Sata IDE Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#ifndef SATA_IDE_MODE +#define SATA_IDE_MODE IDE_LEGACY_MODE +#endif + +/** + * @def EXTERNAL_CLOCK + * @brief 00/10: Reference clock from crystal oscillator via + * PAD_XTALI and PAD_XTALO + * + * @def INTERNAL_CLOCK + * @brief 01/11: Reference clock from internal clock through + * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL + */ +#define EXTERNAL_CLOCK 0x00 +#define INTERNAL_CLOCK 0x01 + +#define SATA_CLOCK_SOURCE EXTERNAL_CLOCK + +/** + * @def SATA_PORT_MULT_CAP_RESERVED + * @brief 1 ON, 0 0FF + */ +#define SATA_PORT_MULT_CAP_RESERVED 1 + + +/** + * @def AZALIA_AUTO + * @brief Detect Azalia controller automatically. + * + * @def AZALIA_DISABLE + * @brief Disable Azalia controller. + + * @def AZALIA_ENABLE + * @brief Enable Azalia controller. + */ +#define AZALIA_AUTO 0 +#define AZALIA_DISABLE 1 +#define AZALIA_ENABLE 2 + +/** + * @breif INCHIP HDA controller + */ +#ifndef AZALIA_CONTROLLER +#define AZALIA_CONTROLLER AZALIA_AUTO +#endif + +/** + * @def AZALIA_PIN_CONFIG + * @brief + * 0 - disable + * 1 - enable + */ +#ifndef AZALIA_PIN_CONFIG +#define AZALIA_PIN_CONFIG 1 +#endif + +/** + * @def AZALIA_SDIN_PIN + * @brief + * SDIN0 is define at BIT0 & BIT1 + * 00 - GPIO PIN + * 01 - Reserved + * 10 - As a Azalia SDIN pin + * SDIN1 is define at BIT2 & BIT3 + * SDIN2 is define at BIT4 & BIT5 + * SDIN3 is define at BIT6 & BIT7 + */ +#ifndef AZALIA_SDIN_PIN +//#define AZALIA_SDIN_PIN 0xAA +#define AZALIA_SDIN_PIN 0x2A +#endif + +/** + * @def GPP_CONTROLLER + */ +#ifndef GPP_CONTROLLER +#define GPP_CONTROLLER 1 +#endif + +/** + * @def GPP_CFGMODE + * @brief GPP Link Configuration + * four possible configuration: + * GPP_CFGMODE_X4000 + * GPP_CFGMODE_X2200 + * GPP_CFGMODE_X2110 + * GPP_CFGMODE_X1111 + */ +#ifndef GPP_CFGMODE +#define GPP_CFGMODE GPP_CFGMODE_X1111 +#endif + + +/** + * @brief South Bridge CIMx configuration + * + */ +void sb700_cimx_config(AMDSBCFG *sb_cfg); + +/** + * @brief Entry point of Southbridge CIMx callout + * + * prototype UINT32 (*SBCIM_HOOK_ENTRY)(UINT32 Param1, UINT32 Param2, void* pConfig) + * + * @param[in] func Southbridge CIMx Function ID. + * @param[in] data Southbridge Input Data. + * @param[in] sb_cfg Southbridge configuration structure pointer. + * + */ +u32 sb700_callout_entry(u32 func, u32 data, void* sb_cfg); + +#endif //_SB700_CFG_H_