20 Dec
2007
20 Dec
'07
8:15 p.m.
Myles Watson wrote:
Hey all - following on Marc's awesome Barcelona patches, here is the code to add the fam10 target to buildrom.
It works for me, but since you used the generic.mk instead of a specific one, it didn't catch that I didn't have iasl installed.
That said, it seems like it would be nicer to have a FAMILY_10 option and just take care of the three variables that change in Serengeti_cheetah.conf. That way you get 64-bit support and the iasl check for free.
If you still want to keep it separate, I'd like the name to be Serengeti_cheetah_fam_10.conf instead of cheetah_fam_10.conf, so it's easy to see what it is.
Myles
Myles,
I agree using the same serengeti_cheetah.conf is better so here is my attempt......
Marc
--
Marc Jones
Senior Firmware Engineer
(970) 226-9684 Office
mailto:Marc.Jones@amd.com
http://www.amd.com/embeddedprocessors
[BUILDROM] Add support for the Cheetah FAM10 target to buildrom
This adds support for the Cheetah FAM10 target in LinuxBIOS to
buildrom. Simple port, uses most of the existing S-C infrastructure.
Singed-off-by: Marc Jones marc.jones@amd.com
Index: buildrom/config/platforms/Config.in
===================================================================
--- buildrom.orig/config/platforms/Config.in 2007-12-20 11:24:57.000000000 -0700
+++ buildrom/config/platforms/Config.in 2007-12-19 09:50:31.000000000 -0700
@@ -104,6 +104,11 @@
select PLATFORM
select PLATFORM_SUPPORT_64BIT
+config PLATFORM_CHEETAH_FAM10
+ bool "AMD Serengeti-Cheetah with fam10 processor"
+ depends VENDOR_AMD
+ select PLATFORM
+ select PLATFORM_SUPPORT_64BIT
endchoice
config BUILD_QEMU
Index: buildrom/config/platforms/platforms.conf
===================================================================
--- buildrom.orig/config/platforms/platforms.conf 2007-12-20 11:24:53.000000000 -0700
+++ buildrom/config/platforms/platforms.conf 2007-12-20 11:30:06.000000000 -0700
@@ -16,6 +16,7 @@
PLATFORM-$(CONFIG_PLATFORM_TYAN_S2891) = tyan-s2891.conf
PLATFORM-$(CONFIG_PLATFORM_SUPERMICRO_H8DMR) = supermicro-h8dmr.conf
PLATFORM-$(CONFIG_PLATFORM_SERENGETI_CHEETAH) = serengeti_cheetah.conf
+PLATFORM-$(CONFIG_PLATFORM_CHEETAH_FAM10) = serengeti_cheetah.conf
PLATFORM-$(CONFIG_PLATFORM_GA_2761GXDK) = ga-2761gxdk.conf
PLATFORM-$(CONFIG_PLATFORM_QEMU-i386) = qemu.conf
Index: buildrom/config/platforms/serengeti_cheetah.conf
===================================================================
--- buildrom.orig/config/platforms/serengeti_cheetah.conf 2007-12-20 11:24:48.000000000 -0700
+++ buildrom/config/platforms/serengeti_cheetah.conf 2007-12-20 11:30:27.000000000 -0700
@@ -1,5 +1,5 @@
# Support for the AMD Serengeti_Cheetah Platform
-# This should work for most K8+8111 platforms
+# This should work for most K8/fam10+8111 platforms
#### Platform configuration
@@ -42,12 +42,21 @@
# LinuxBIOS configuration
+ifeq ($(CONFIG_PLATFORM_CHEETAH_FAM10),y)
+LINUXBIOS_VENDOR=amd
+LINUXBIOS_BOARD=serengeti_cheetah_fam10
+LINUXBIOS_CONFIG=Config.lb
+LINUXBIOS_TDIR=serengeti_cheetah_fam10
+LINUXBIOS_TAG=3018
+LINUXBIOS_ROM_NAME=amd-cheetah-fam10.rom
+else
LINUXBIOS_VENDOR=amd
LINUXBIOS_BOARD=serengeti_cheetah
LINUXBIOS_CONFIG=Config.lb
LINUXBIOS_TDIR=serengeti_cheetah
LINUXBIOS_TAG=2950
LINUXBIOS_ROM_NAME=serengeti_cheetah.rom
+endif
# FILO configuration