I already run coreboot on my system. The problem is that my linux started from coreboot i very slow (comparing to the original BIOS)
I have no idea where might be the problem.
I'm attaching the irq_tables.c and output.txt you requested. (all generated with the original BIOS)
the superio is a NSC PC87364 but coreboot works with your PC87360 implementation. it is a uniprocessor PIII platform.
I tried to boot the system with a: Pentium 3 733MHz, and Celeron 400MHz
the coreboot booted linux works slow with both processors.
Best regards. Paweł Stawicki
2009/10/18 Uwe Hermann uwe@hermann-uwe.de
Hi,
On Wed, Oct 14, 2009 at 11:38:44PM +0200, Paweł Stawicki wrote:
I'm very new to coreboot. I'm trying to boot my old hp eVectra with coreboot (because my old bios don't support VIA c3 processor)
It took me some time to understand why my onboard VGA card don't starts, but now it works :-)
Now I have a new problem. My linux distribution boots very slow (approximately 30 minutes - to the login prompt). I found this mail: [PATCH] Initial support for the MSI MS-6178 (i810-based)<
http://news.gmane.org/find-root.php?message_id=%3c20070831091956.GA9039%40gr...
From: Uwe Hermann with the same problem but I could not find the solution in the mailing thread.
Do you already run coreboot on the board? Or do you want to add support?
Either way, please send the following information so we can support it:
- lspci -tvnn
- superiotool -dV
- getpir output (a file named irq_table.c)
- mptable output
You can get the utilities via:
svn co svn://coreboot.org/repos/trunk/util
Thanks, Uwe.
http://www.hermann-uwe.de | http://www.randomprojects.org http://www.crazy-hacks.org | http://www.unmaintained-free-software.org