Phani,
Phani Babu Giddi wrote:
Hello All,
I am trying to append VGA ROM that is extracted using dd and trying to include it as part of the final flash image. Now I reduce the ROM_SIZE by 36K for VSM and 32K for VGA ROM. As per the procedure I also edit src/mainboard/amd/db800/Options.lb and Config.lb http://Config.lb.
Now there seems to be some problem in finding VSA and thereafter the VGA also. Take a look at the log messages. I am using SST49LF008A which is a 1MB flash part.
Before VSA: do_vsmbios buf ilen 828 olen2606 buf 00060000 *buf 254 buf[256k] 0 buf[0x20] signature is 82:6a:ff:ff do_vsmbios: no vsainit.bin signature, skipping! After VSA: Graphics init... VRC_VG value: 0xffff Finding PCI configuration type. PCI: Sanity check failed pci_check_direct failed
Regards, Phani
You don't normally include the VGA ROM since there is a framebuffer driver. I think Artec dbe61 has some code that does it it you want to put that in your platform. It is not part of the normal db800 setup. If VSA doesn't work no Geode LX or 5536 PCI devices will work. That is why Graphics init fails. VSA has to be on the end. So, "cat vsa vga coreboot
romfile".
Marc