[coreboot] Re: Asrock e350m1: sata disks not recognized

[Peter Stuge]

Michal Zygowski wrote:
> Also by looking at latest board status, the SATA was working:
> https://review.coreboot.org/cgit/board-status.git/tree/asrock/e350m1/4.11-90...
>
> Line 1180:
>
> |AHCI/0: Set transfer mode to UDMA-6 Searching bios-geometry for:
> /pci@i0cf8/*@11/drive@0/disk@0 AHCI/0: registering: "AHCI/0: SanDisk
> SDSSDP064G ATA-9 Hard-Disk (61057 MiBytes)"|
>
> Don't know exactly what could cause it. I would try to build with the
> same config and repo revision as in the board status.

This is a very good suggestion. If it still doesn't work, then maybe
there is a difference between flash (SSD) and metal (HDD) SATA devices...

//Peter