Hi All,
I'm trying to build a coreboot-v3 ROM for an Acer L320 (ViiV) box based on Uwe's Kontron sources. Finally it's been built due some modifications on the sources (new target /w different superio etc.). But, unfortunately I'm a littlebit confused as the kontron's ROM is based on Core 2 Duo (C2D) CPU, but mine board just has 1 Core Duo (CD). An other thing I haven't created a proper static device tree for that config, so I have some more tasks left on this too. As I newbie I would like ask you guys what's the next step(s) to get it work. Unfortunately, that board doesn't have any serial port but USB, but the USB debug cable is a littlebit expensive for me. So,I want to be sure that the ROM should come up at least to drive the on-board VGA for debug output.
The brief details of the board:) ================================= CPU ================================= Socket: LGA 775 Supported CPUs (hopefully): Pentium 4, Pentium, D 820/920, Core Duo, Core 2 Duo Hyper-Threading ----------------------------------------------------------------- | 533/800 Mhz FSB | ================================= MCH Intel 946GZ ================================= 1 Analog VGA (Intel GMA 3000) 1 SDVO: Not Used (ADD2) 2 of 2 dual channel memory (DDR2) CHA & CHB 0 of 1 PCIex16 for graphics ----------------------------------------------------------------- | DMI (Direct Media Interface) | ================================= ICH (I/O Controller HUB) 82801DGH I/O Controller (ICH7) ================================= 1 x PCI Bus 1 x Ethernet LAN (82573L PRO PM (Vidalia) 10/100/1000) on the one PCI-ex1 Rev 1.0a or 1.1 6 of 8 USB 2 1 of 4 SATA 1 SMBUS 2.0/I2C 1 Power Mgmt (ACPI 2.0/1.1) 1 IDE (CD/DVD ROM) 1 AC'97 Audio 1 Intel HD Audio ----------------------------------------------------------------- | LPC Interface | ================================= Superio and FWH/LPC ================================= ITE8217F superio PLCC32 512KB flash -----------------------------------------------------------------
Cheers,
Pal