Other board has been fixed. Please have a test.
Add CONFIG_VGA_ROM_RUN to tim5690, tim8690, kt690, otherwise the VGA ROM can not run. After make, run
./cbfs/cbfstool ./coreboot.rom add ../vga_bios.rom pci1002,791f.rom
optionrom to make the final image with vga bios.
The macro vga_rom_address is out-of-date when CBFS starts play its role. it also should be eliminated from rs690/chip.h.
Zheng
Signed-off-by: Zheng Bao zheng.bao@amd.com
Index: src/southbridge/amd/rs690/chip.h =================================================================== --- src/southbridge/amd/rs690/chip.h (revision 4782) +++ src/southbridge/amd/rs690/chip.h (working copy) @@ -23,7 +23,6 @@ /* Member variables are defined in Config.lb. */ struct southbridge_amd_rs690_config { - u32 vga_rom_address; /* The location that the VGA rom has been appened. */ u8 gpp_configuration; /* The configuration of General Purpose Port, A/B/C/D/E. */ u8 port_enable; /* Which port is enabled? GFX(2,3), GPP(4,5,6,7) */ u8 gfx_dev2_dev3; /* for GFX Core initialization REFCLK_SEL */ Index: src/mainboard/kontron/kt690/Options.lb =================================================================== --- src/mainboard/kontron/kt690/Options.lb (revision 4782) +++ src/mainboard/kontron/kt690/Options.lb (working copy) @@ -91,6 +91,7 @@ uses CONFIG_VIDEO_MB uses CONFIG_GFXUMA uses CONFIG_HAVE_MAINBOARD_RESOURCES +uses CONFIG_VGA_ROM_RUN
### ### Build options @@ -161,6 +162,7 @@ #VGA Console default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 +default CONFIG_VGA_ROM_RUN=1
# BTDC: Only one HT device on Herring. #HT Unit ID offset Index: src/mainboard/kontron/kt690/Config.lb =================================================================== --- src/mainboard/kontron/kt690/Config.lb (revision 4782) +++ src/mainboard/kontron/kt690/Config.lb (working copy) @@ -136,7 +136,6 @@ #The variables belong to mainboard are defined here.
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define vga_rom_address = 0xfff0000 #Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) #Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, # 1: the system allows a PCIE link to be established on Dev2 or Dev3. @@ -170,7 +169,6 @@ device pci 6.0 on end # PCIE P2P bridge 0x7916 device pci 7.0 on end # PCIE P2P bridge 0x7917 device pci 8.0 off end # NB/SB Link P2P bridge - register "vga_rom_address" = "0xfff00000" register "gpp_configuration" = "4" register "port_enable" = "0xfc" register "gfx_dev2_dev3" = "1" Index: src/mainboard/kontron/kt690/devicetree.cb =================================================================== --- src/mainboard/kontron/kt690/devicetree.cb (revision 4782) +++ src/mainboard/kontron/kt690/devicetree.cb (working copy) @@ -1,5 +1,4 @@ #Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define vga_rom_address = 0xfff0000 #Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) #Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, # 1: the system allows a PCIE link to be established on Dev2 or Dev3. @@ -33,7 +32,6 @@ device pci 6.0 on end # PCIE P2P bridge 0x7916 device pci 7.0 on end # PCIE P2P bridge 0x7917 device pci 8.0 off end # NB/SB Link P2P bridge - register "vga_rom_address" = "0xfff00000" register "gpp_configuration" = "4" register "port_enable" = "0xfc" register "gfx_dev2_dev3" = "1" Index: src/mainboard/technexion/tim8690/Options.lb =================================================================== --- src/mainboard/technexion/tim8690/Options.lb (revision 4782) +++ src/mainboard/technexion/tim8690/Options.lb (working copy) @@ -90,6 +90,7 @@ uses CONFIG_VIDEO_MB uses CONFIG_GFXUMA uses CONFIG_HAVE_MAINBOARD_RESOURCES +uses CONFIG_VGA_ROM_RUN
### ### Build options @@ -159,6 +160,7 @@ #VGA Console default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 +default CONFIG_VGA_ROM_RUN=1
# BTDC: Only one HT device on Herring. #HT Unit ID offset Index: src/mainboard/technexion/tim8690/Config.lb =================================================================== --- src/mainboard/technexion/tim8690/Config.lb (revision 4782) +++ src/mainboard/technexion/tim8690/Config.lb (working copy) @@ -136,7 +136,6 @@ #The variables belong to mainboard are defined here.
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define vga_rom_address = 0xfff80000 #Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) #Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, # 1: the system allows a PCIE link to be established on Dev2 or Dev3. @@ -170,7 +169,6 @@ device pci 6.0 on end # PCIE P2P bridge 0x7916 device pci 7.0 on end # PCIE P2P bridge 0x7917 device pci 8.0 off end # NB/SB Link P2P bridge - register "vga_rom_address" = "0xfff80000" register "gpp_configuration" = "4" register "port_enable" = "0xfc" register "gfx_dev2_dev3" = "1" Index: src/mainboard/technexion/tim8690/devicetree.cb =================================================================== --- src/mainboard/technexion/tim8690/devicetree.cb (revision 4782) +++ src/mainboard/technexion/tim8690/devicetree.cb (working copy) @@ -1,5 +1,4 @@ #Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define vga_rom_address = 0xfff80000 #Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) #Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, # 1: the system allows a PCIE link to be established on Dev2 or Dev3. @@ -33,7 +32,6 @@ device pci 6.0 on end # PCIE P2P bridge 0x7916 device pci 7.0 on end # PCIE P2P bridge 0x7917 device pci 8.0 off end # NB/SB Link P2P bridge - register "vga_rom_address" = "0xfff80000" register "gpp_configuration" = "4" register "port_enable" = "0xfc" register "gfx_dev2_dev3" = "1" Index: src/mainboard/technexion/tim5690/Config.lb =================================================================== --- src/mainboard/technexion/tim5690/Config.lb (revision 4782) +++ src/mainboard/technexion/tim5690/Config.lb (working copy) @@ -136,7 +136,6 @@ #The variables belong to mainboard are defined here.
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define vga_rom_address = 0xfff80000 #Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) #Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, # 1: the system allows a PCIE link to be established on Dev2 or Dev3. @@ -173,10 +172,6 @@ device pci 6.0 on end # PCIE P2P bridge 0x7916 device pci 7.0 on end # PCIE P2P bridge 0x7917 device pci 8.0 off end # NB/SB Link P2P bridge - register "vga_rom_address" = "0xfff80000" - #register "vga_rom_address" = "0xfff00000" - #register "vga_rom_address" = "0xffe00000" - #register "vga_rom_address" = "0xffc00000" register "gpp_configuration" = "4" register "port_enable" = "0xfc" register "gfx_dev2_dev3" = "1" Index: src/mainboard/technexion/tim5690/devicetree.cb =================================================================== --- src/mainboard/technexion/tim5690/devicetree.cb (revision 4782) +++ src/mainboard/technexion/tim5690/devicetree.cb (working copy) @@ -1,5 +1,4 @@ #Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define vga_rom_address = 0xfff80000 #Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) #Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, # 1: the system allows a PCIE link to be established on Dev2 or Dev3. @@ -36,10 +35,6 @@ device pci 6.0 on end # PCIE P2P bridge 0x7916 device pci 7.0 on end # PCIE P2P bridge 0x7917 device pci 8.0 off end # NB/SB Link P2P bridge - register "vga_rom_address" = "0xfff80000" - #register "vga_rom_address" = "0xfff00000" - #register "vga_rom_address" = "0xffe00000" - #register "vga_rom_address" = "0xffc00000" register "gpp_configuration" = "4" register "port_enable" = "0xfc" register "gfx_dev2_dev3" = "1" Index: targets/kontron/kt690/Config.lb =================================================================== --- targets/kontron/kt690/Config.lb (revision 4783) +++ targets/kontron/kt690/Config.lb (working copy) @@ -4,14 +4,14 @@ mainboard kontron/kt690
romimage "normal" - option CONFIG_ROM_SIZE = 1024*1024 - 55808 + option CONFIG_ROM_SIZE = 1024*1024 option CONFIG_USE_FALLBACK_IMAGE=0 option CONFIG_ROM_IMAGE_SIZE=0x20000 option CONFIG_XIP_ROM_SIZE=0x20000 payload ../payload.elf end
-romimage "fallback" +romimage "fallback" option CONFIG_USE_FALLBACK_IMAGE=1 option CONFIG_ROM_IMAGE_SIZE=0x20000 option CONFIG_XIP_ROM_SIZE=0x20000 Index: targets/technexion/tim8690/Config.lb =================================================================== --- targets/technexion/tim8690/Config.lb (revision 4783) +++ targets/technexion/tim8690/Config.lb (working copy) @@ -3,17 +3,16 @@ target tim8690 mainboard technexion/tim8690
- romimage "normal" - option CONFIG_ROM_SIZE = 1024*512 - 55808 + option CONFIG_ROM_SIZE = 1024*512 option CONFIG_USE_FALLBACK_IMAGE=0 option CONFIG_ROM_IMAGE_SIZE=0x20000 option CONFIG_XIP_ROM_SIZE=0x20000 payload /home/daniel/mypayloads/link end
-romimage "fallback" - option CONFIG_FALLBACK_SIZE= 1024*512 - 55808 +romimage "fallback" + option CONFIG_FALLBACK_SIZE= 1024*512 option CONFIG_USE_FALLBACK_IMAGE=1 option CONFIG_ROM_IMAGE_SIZE=0x20000 option CONFIG_XIP_ROM_SIZE=0x20000 @@ -21,7 +20,7 @@
end
-buildrom ./coreboot.rom CONFIG_ROM_SIZE "fallback" +buildrom ./coreboot.rom CONFIG_ROM_SIZE "fallback"
Index: targets/technexion/tim5690/Config.lb =================================================================== --- targets/technexion/tim5690/Config.lb (revision 4783) +++ targets/technexion/tim5690/Config.lb (working copy) @@ -19,7 +19,7 @@ payload ../payload.elf end
-romimage "fallback" +romimage "fallback" option CONFIG_USE_FALLBACK_IMAGE=1 option CONFIG_ROM_IMAGE_SIZE=0x20000 option CONFIG_XIP_ROM_SIZE=0x20000 @@ -27,5 +27,5 @@ payload ../payload.elf end
-buildrom ./coreboot.rom CONFIG_ROM_SIZE "fallback" +buildrom ./coreboot.rom CONFIG_ROM_SIZE "fallback"