Hi Pietro,
thanks for testing my patch!
On 29.06.2008 18:25, Pietro wrote:
After applying the patch, here is the output of flashrom -V... I launched and forgot the terminal for a while... I saw it back after an hour...
Calibrating delay loop... 455M loops per second. OK. No coreboot table found. Found chipset "Intel ICH7M", enabling flash write... Root Complex Register Block address = 0xfed1c000 GCS address = 0xfed1f410 GCS = 0xaa0c64: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) [...]
SPI Read Configuration: prefetching disabled, caching enabled, BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 OK. Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff [...] Probing for Atmel AT25DF321, 4096 KB: Programming OPCODES... done timeout Transaction error! run OPCODE 0x9f failed Probing for AMIC Technology A25L40P, 512 KB: timeout Transaction error! run OPCODE 0x9f failed Probing for AMIC Technology A49LF040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e [...] No operations were specified.
OK, that confirms Stefan's suspicion that running the opcode is the problem.
Regards, Carl-Daniel