here's dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-12-generic (root@devel.trisquel.info) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #0trisquel1 SMP Tue Oct 25 15:17:30 UTC 2011 (Ubuntu 2.6.38-12.51+5.0trisquel1-generic 2.6.38.8-libre) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006ffee000 (usable) [ 0.000000] BIOS-e820: 000000006ffee000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI present. [ 0.000000] DMI: ASUS M4A785T-M, BIOS 4.0-1889-gac9f320 11/27/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x6ffee max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-back [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000070000000 mask FFFFF0000000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00fd980] fd980 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 35fd6000 - 36fe3000 [ 0.000000] ACPI: RSDP 000fd960 00014 (v00 CORE ) [ 0.000000] ACPI: RSDT 6fff2424 0003C (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: HPET 6fff24c8 00038 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: APIC 6fff2500 0005C (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: SRAT 6fff2560 000A0 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: SLIT 6fff2600 0002D (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: SSDT 6fff2630 00635 (v01 AMD-FA AMD-ACPI 06040000 INTL 20110922) [ 0.000000] ACPI: FACP 6fff56c0 000F4 (v03 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: DSDT 6fff2c68 02A18 (v02 ASUS M4A785-M 00010001 INTL 20110922) [ 0.000000] ACPI: FACS 6fff5680 00040 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 903MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0006ffee [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0006ffee [ 0.000000] On node 0 totalpages: 458621 [ 0.000000] free_area_init_node: node 0, pgdat c1770140, node_mem_map f51d6200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1808 pages used for memmap [ 0.000000] HighMem zone: 229600 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x818 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x102282a0 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f7000000 s28800 r0 d24448 u2097152 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 455037 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-12-generic root=/dev/mapper/root ro console=ttyS0,115200 console=tty0 modeset=1 pci=nocrs [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 9174360 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0006ffee) [ 0.000000] Memory: 1784528k/1834936k available (5190k kernel code, 49956k reserved, 2458k data, 700k init, 925632k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1779000 - 0xc1828000 ( 700 kB) [ 0.000000] .data : 0xc1511b51 - 0xc17784c0 (2458 kB) [ 0.000000] .text : 0xc1000000 - 0xc1511b51 (5190 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f4408000 soft=f440a000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3000.540 MHz processor. [ 0.012002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6001.08 BogoMIPS (lpj=12002160) [ 0.020006] pid_max: default: 32768 minimum: 301 [ 0.024023] Security Framework initialized [ 0.028018] AppArmor: AppArmor initialized [ 0.032005] Yama: becoming mindful. [ 0.036056] Mount-cache hash table entries: 512 [ 0.040107] Initializing cgroup subsys ns [ 0.044008] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.048007] Initializing cgroup subsys cpuacct [ 0.052008] Initializing cgroup subsys memory [ 0.056013] Initializing cgroup subsys devices [ 0.060010] Initializing cgroup subsys freezer [ 0.064007] Initializing cgroup subsys net_cls [ 0.068006] Initializing cgroup subsys blkio [ 0.072032] CPU: Physical Processor ID: 0 [ 0.076007] CPU: Processor Core ID: 0 [ 0.080009] mce: CPU supports 6 MCE banks [ 0.089049] ACPI: Core revision 20110112 [ 0.094004] ftrace: allocating 23652 entries in 47 pages [ 0.100066] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.108648] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.154477] CPU0: AMD Athlon(tm) II X2 250 Processor stepping 02 [ 0.164009] Performance Events: AMD PMU driver. [ 0.164012] ... version: 0 [ 0.168010] ... bit width: 48 [ 0.172010] ... generic registers: 4 [ 0.176011] ... value mask: 0000ffffffffffff [ 0.180011] ... max period: 00007fffffffffff [ 0.184011] ... fixed-purpose events: 0 [ 0.188012] ... event mask: 000000000000000f [ 0.192410] CPU 1 irqstacks, hard=f44aa000 soft=f44ac000 [ 0.192414] Booting Node 0, Processors #1 Ok. [ 0.012000] Initializing CPU#1 [ 0.292017] TSC synchronization [CPU#0 -> CPU#1]: [ 0.292017] Measured 37471011521 cycles TSC warp between CPUs, turning off TSC clock. [ 0.292017] Marking TSC unstable due to check_tsc_sync_source failed [ 0.292026] Brought up 2 CPUs [ 0.296019] Total of 2 processors activated (10001.42 BogoMIPS). [ 0.300851] devtmpfs: initialized [ 0.308517] print_constraints: dummy: [ 0.312055] Time: 4:11:53 Date: 11/28/11 [ 0.316071] NET: Registered protocol family 16 [ 0.320059] Trying to unpack rootfs image as initramfs... [ 0.320179] EISA bus registered [ 0.320187] node 0 link 0: io port [1000, 3fff] [ 0.320192] TOM: 0000000080000000 aka 2048M [ 0.320195] Fam 10h mmconf [e0000000, efffffff] [ 0.320200] node 0 link 0: mmio [d4000000, d84fffff] [ 0.320204] node 0 link 0: mmio [c0000000, d00fffff] [ 0.320209] bus: [00, 03] on node 0 link 0 [ 0.320213] bus: 00 index 0 [io 0x0000-0xffff] [ 0.320217] bus: 00 index 1 [mem 0xd0100000-0xdfffffff] [ 0.320221] bus: 00 index 2 [mem 0x80000000-0xd00fffff] [ 0.320224] bus: 00 index 3 [mem 0xf0000000-0xffffffff] [ 0.320253] Extended Config Space enabled on 1 nodes [ 0.320263] ACPI: bus type pci registered [ 0.320463] PCI: PCI BIOS revision 2.10 entry at 0xfc839, last bus=3 [ 0.320466] PCI: Using configuration type 1 for base access [ 0.320468] PCI: Using configuration type 1 for extended access [ 0.320492] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.320494] mtrr: probably your BIOS does not setup all CPUs. [ 0.320496] mtrr: corrected configuration. [ 0.320496] bio: create slab <bio-0> at 0 [ 0.321495] ACPI: EC: Look up EC in DSDT [ 0.321495] ACPI: Executed 2 blocks of module-level executable AML code [ 0.321495] ACPI: Interpreter enabled [ 0.328024] ACPI: (supports S0 S1 S2 S3 S4 S5) [ 0.333620] ACPI: BIOS offers _BFS [ 0.336023] ACPI: If "acpi.bfs=1" improves resume, please notify linux- acpi@vger.kernel.org [ 0.348024] ACPI: Using IOAPIC for interrupt routing [ 0.377796] ACPI: Power Resource [PFN0] (on) [ 0.412155] ACPI: No dock devices found. [ 0.416028] HEST: Table not found. [ 0.418382] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.428130] ACPI Error: [TOM2] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.437523] ACPI Error: Method parse/execution failed [_SB_.PCI0._CRS] (Node f4426e70), AE_NOT_FOUND (20110112/psparse-536) [ 0.448036] [Firmware Bug]: ACPI: no secondary bus range in _CRS [ 0.456041] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.464166] ACPI Error: [TOM2] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.469530] ACPI Error: Method parse/execution failed [_SB_.PCI0._CRS] (Node f4426e70), AE_NOT_FOUND (20110112/psparse-536) [ 0.482505] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600 [ 0.482652] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604 [ 0.484130] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604 [ 0.484219] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.484226] pci 0000:00:0a.0: PME# disabled [ 0.484280] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 [ 0.484314] pci 0000:00:11.0: reg 10: [io 0x3020-0x3027] [ 0.484331] pci 0000:00:11.0: reg 14: [io 0x3040-0x3043] [ 0.484347] pci 0000:00:11.0: reg 18: [io 0x3028-0x302f] [ 0.484363] pci 0000:00:11.0: reg 1c: [io 0x3044-0x3047] [ 0.484382] pci 0000:00:11.0: reg 20: [io 0x3000-0x300f] [ 0.484399] pci 0000:00:11.0: reg 24: [mem 0xd8409000-0xd84093ff] [ 0.484437] pci 0000:00:11.0: set SATA to AHCI mode [ 0.488090] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.488113] pci 0000:00:12.0: reg 10: [mem 0xd8404000-0xd8404fff] [ 0.488224] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.488252] pci 0000:00:12.1: reg 10: [mem 0xd8405000-0xd8405fff] [ 0.488370] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.488407] pci 0000:00:12.2: reg 10: [mem 0xd8409400-0xd84094ff] [ 0.488528] pci 0000:00:12.2: supports D1 D2 [ 0.488532] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.488538] pci 0000:00:12.2: PME# disabled [ 0.488576] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.488597] pci 0000:00:13.0: reg 10: [mem 0xd8406000-0xd8406fff] [ 0.488712] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.488736] pci 0000:00:13.1: reg 10: [mem 0xd8407000-0xd8407fff] [ 0.488855] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.488891] pci 0000:00:13.2: reg 10: [mem 0xd8409500-0xd84095ff] [ 0.489013] pci 0000:00:13.2: supports D1 D2 [ 0.489017] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.489024] pci 0000:00:13.2: PME# disabled [ 0.489067] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.489209] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.489227] pci 0000:00:14.1: reg 10: [io 0x3030-0x3037] [ 0.489245] pci 0000:00:14.1: reg 14: [io 0x3048-0x304b] [ 0.489258] pci 0000:00:14.1: reg 18: [io 0x3038-0x303f] [ 0.489271] pci 0000:00:14.1: reg 1c: [io 0x304c-0x304f] [ 0.489284] pci 0000:00:14.1: reg 20: [io 0x3010-0x301f] [ 0.489336] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.489371] pci 0000:00:14.2: reg 10: [mem 0xd8400000-0xd8403fff 64bit] [ 0.489449] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.489455] pci 0000:00:14.2: PME# disabled [ 0.489478] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.489584] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.492072] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.492090] pci 0000:00:14.5: reg 10: [mem 0xd8408000-0xd8408fff] [ 0.492184] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.492211] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.492234] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.492258] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.492284] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.492318] PCI: peer root bus 00 res updated from pci conf [ 0.492375] pci 0000:01:05.0: [1002:9710] type 0 class 0x000300 [ 0.492393] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref] [ 0.492403] pci 0000:01:05.0: reg 14: [io 0x1000-0x10ff] [ 0.492413] pci 0000:01:05.0: reg 18: [mem 0xd8100000-0xd810ffff] [ 0.492441] pci 0000:01:05.0: reg 24: [mem 0xd8000000-0xd80fffff] [ 0.492466] pci 0000:01:05.0: supports D1 D2 [ 0.492491] pci 0000:01:05.1: [1002:970f] type 0 class 0x000403 [ 0.492508] pci 0000:01:05.1: reg 10: [mem 0xd8110000-0xd8113fff] [ 0.492570] pci 0000:01:05.1: supports D1 D2 [ 0.492634] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.496038] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.496044] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xd81fffff] [ 0.496053] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.496152] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.496173] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff] [ 0.496217] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref] [ 0.496244] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref] [ 0.496260] pci 0000:02:00.0: reg 30: [mem 0xd8200000-0xd820ffff pref] [ 0.496312] pci 0000:02:00.0: supports D1 D2 [ 0.496316] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.496323] pci 0000:02:00.0: PME# disabled [ 0.496389] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.504044] pci 0000:00:0a.0: bridge window [io 0x2000-0x2fff] [ 0.504051] pci 0000:00:0a.0: bridge window [mem 0xd8200000-0xd82fffff] [ 0.504060] pci 0000:00:0a.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.504115] pci 0000:03:06.0: [168c:0029] type 0 class 0x000280 [ 0.504146] pci 0000:03:06.0: reg 10: [mem 0xd8300000-0xd830ffff] [ 0.504279] pci 0000:03:06.0: PME# supported from D0 D3hot [ 0.504287] pci 0000:03:06.0: PME# disabled [ 0.504355] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.512037] pci 0000:00:14.4: bridge window [io 0xf000-0xe000] (disabled) [ 0.512044] pci 0000:00:14.4: bridge window [mem 0xd8300000-0xd83fffff] [ 0.512052] pci 0000:00:14.4: bridge window [mem 0xdff00000-0xdfefffff pref] (disabled) [ 0.512057] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.512062] pci 0000:00:14.4: bridge window [mem 0xd0100000-0xdfffffff] (subtractive decode) [ 0.512067] pci 0000:00:14.4: bridge window [mem 0x80000000-0xd00fffff] (subtractive decode) [ 0.512072] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) [ 0.512090] pci_bus 0000:00: on NUMA node 0 [ 0.512095] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] [ 0.512095] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.AGPB._PRT] [ 0.512105] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PBRA._PRT] [ 0.512149] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PIBR._PRT] [ 0.512282] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.528310] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.537025] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.545785] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.556305] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.565026] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.573907] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. [ 0.581417] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.590178] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.600395] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.608043] vgaarb: loaded [ 0.612323] SCSI subsystem initialized [ 0.617817] Freeing initrd memory: 16436k freed [ 0.617817] libata version 3.00 loaded. [ 0.617817] usbcore: registered new interface driver usbfs [ 0.617817] usbcore: registered new interface driver hub [ 0.617817] usbcore: registered new device driver usb [ 0.617817] wmi: Mapper loaded [ 0.617817] PCI: Using ACPI for IRQ routing [ 0.617817] PCI: pci_cache_line_size set to 64 bytes [ 0.617817] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.617817] reserve RAM buffer: 000000006ffee000 - 000000006fffffff [ 0.617817] NetLabel: Initializing [ 0.617817] NetLabel: domain hash size = 128 [ 0.617817] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.617817] NetLabel: unlabeled traffic allowed by default [ 0.617817] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.617817] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.618190] Switching to clocksource hpet [ 0.626218] Switched to NOHz mode on CPU #0 [ 0.627160] Switched to NOHz mode on CPU #1 [ 0.637951] AppArmor: AppArmor Filesystem Enabled [ 0.643804] pnp: PnP ACPI init [ 0.647038] ACPI: bus type pnp registered [ 0.651436] ACPI Error: [TOM2] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) [ 0.660501] ACPI Error: Method parse/execution failed [_SB_.PCI0._CRS] (Node f4426e70), AE_NOT_FOUND (20110112/psparse-536) [ 0.672470] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.672640] pnp 00:01: [irq 8] [ 0.672645] pnp 00:01: [io 0x0070-0x0071] [ 0.672698] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.672714] pnp 00:02: [io 0x0061] [ 0.672767] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.672785] pnp 00:03: [dma 4] [ 0.672788] pnp 00:03: [io 0x0000-0x000f] [ 0.672793] pnp 00:03: [io 0x0081-0x0083] [ 0.672797] pnp 00:03: [io 0x0087] [ 0.672800] pnp 00:03: [io 0x0089-0x008b] [ 0.672803] pnp 00:03: [io 0x008f] [ 0.672807] pnp 00:03: [io 0x00c0-0x00df] [ 0.672862] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.672876] pnp 00:04: [io 0x00f0-0x00ff] [ 0.672887] pnp 00:04: [irq 13] [ 0.672941] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.672985] pnp 00:05: [mem 0xfed00000-0xfed003ff] [ 0.673039] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.673067] pnp: PnP ACPI: found 6 devices [ 0.677642] ACPI: ACPI bus type pnp unregistered [ 0.682414] PnPBIOS: Disabled by ACPI PNP [ 0.724847] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.730586] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.736784] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xd81fffff] [ 0.743719] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.751632] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.757013] pci 0000:00:0a.0: bridge window [io 0x2000-0x2fff] [ 0.763258] pci 0000:00:0a.0: bridge window [mem 0xd8200000-0xd82fffff] [ 0.770203] pci 0000:00:0a.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.778120] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.783494] pci 0000:00:14.4: bridge window [io disabled] [ 0.789268] pci 0000:00:14.4: bridge window [mem 0xd8300000-0xd83fffff] [ 0.796213] pci 0000:00:14.4: bridge window [mem pref disabled] [ 0.802489] pci 0000:00:0a.0: setting latency timer to 64 [ 0.802502] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.802507] pci_bus 0000:00: resource 5 [mem 0xd0100000-0xdfffffff] [ 0.802512] pci_bus 0000:00: resource 6 [mem 0x80000000-0xd00fffff] [ 0.802517] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xffffffff] [ 0.802521] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.802526] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd81fffff] [ 0.802530] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.802535] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.802540] pci_bus 0000:02: resource 1 [mem 0xd8200000-0xd82fffff] [ 0.802544] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.802549] pci_bus 0000:03: resource 1 [mem 0xd8300000-0xd83fffff] [ 0.802554] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] [ 0.802558] pci_bus 0000:03: resource 5 [mem 0xd0100000-0xdfffffff] [ 0.802562] pci_bus 0000:03: resource 6 [mem 0x80000000-0xd00fffff] [ 0.802567] pci_bus 0000:03: resource 7 [mem 0xf0000000-0xffffffff] [ 0.802617] NET: Registered protocol family 2 [ 0.807281] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.814922] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.823416] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.830997] TCP: Hash tables configured (established 131072 bind 65536) [ 0.837916] TCP reno registered [ 0.841201] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.847274] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.853854] NET: Registered protocol family 1 [ 0.858424] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.865582] pci 0000:01:05.0: Boot video device [ 0.865596] PCI: CLS 64 bytes, default 64 [ 0.865951] cpufreq-nforce2: No nForce2 chipset. [ 0.871126] audit: initializing netlink socket (disabled) [ 0.876776] type=2000 audit(1322453512.876:1): initialized [ 0.907042] highmem bounce pool size: 64 pages [ 0.911623] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.919507] VFS: Disk quotas dquot_6.5.2 [ 0.923670] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.931933] fuse init (API version 7.16) [ 0.936066] msgmni has been set to 1709 [ 0.940445] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.948030] io scheduler noop registered [ 0.952079] io scheduler deadline registered [ 0.956518] io scheduler cfq registered (default) [ 0.961563] pcieport 0000:00:0a.0: setting latency timer to 64 [ 0.961641] pcieport 0000:00:0a.0: irq 40 for MSI/MSI-X [ 0.961780] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.967721] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.974651] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.986284] ACPI: Power Button [PWRB] [ 0.990167] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.997773] ACPI: Power Button [PWRF] [ 1.001640] ACPI: Fan [FAN0] (on) [ 1.005350] ACPI: acpi_idle registered with cpuidle [ 1.028063] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.033845] ACPI: Thermal Zone [TZ00] (40 C) [ 1.038211] ERST: Table is not found! [ 1.042063] isapnp: Scanning for PnP cards... [ 1.042087] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.063191] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.436173] isapnp: No Plug & Play device found [ 1.548255] Linux agpgart interface v0.103 [ 1.553492] brd: module loaded [ 1.557070] loop: module loaded [ 1.560414] i2c-core: driver [adp5520] using legacy suspend method [ 1.566723] i2c-core: driver [adp5520] using legacy resume method [ 1.572993] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.580617] Fixed MDIO Bus: probed [ 1.584124] PPP generic driver version 2.4.2 [ 1.588529] tun: Universal TUN/TAP device driver, 1.6 [ 1.593714] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com [ 1.600084] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.606700] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.613971] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.619306] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.626899] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.635806] ehci_hcd 0000:00:12.2: debug port 1 [ 1.640539] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd8409400 [ 1.656029] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.662151] hub 1-0:1.0: USB hub found [ 1.666173] hub 1-0:1.0: 6 ports detected [ 1.670432] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.677812] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.683249] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.690853] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.699723] ehci_hcd 0000:00:13.2: debug port 1 [ 1.704388] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd8409500 [ 1.720025] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.725985] hub 2-0:1.0: USB hub found [ 1.729868] hub 2-0:1.0: 6 ports detected [ 1.734035] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.740326] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.747597] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.752933] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.760552] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd8404000 [ 1.824176] hub 3-0:1.0: USB hub found [ 1.828109] hub 3-0:1.0: 3 ports detected [ 1.832314] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.839609] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.845050] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.852700] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd8405000 [ 1.916086] hub 4-0:1.0: USB hub found [ 1.919909] hub 4-0:1.0: 3 ports detected [ 1.924150] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.931468] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.936798] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.944410] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd8406000 [ 2.008164] hub 5-0:1.0: USB hub found [ 2.012096] hub 5-0:1.0: 3 ports detected [ 2.016308] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.023615] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 2.029051] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.036810] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd8407000 [ 2.100076] hub 6-0:1.0: USB hub found [ 2.103886] hub 6-0:1.0: 3 ports detected [ 2.108100] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.115384] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.120715] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.132071] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd8408000 [ 2.196177] hub 7-0:1.0: USB hub found [ 2.200101] hub 7-0:1.0: 2 ports detected [ 2.204306] uhci_hcd: USB Universal Host Controller Interface driver [ 2.210948] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.218340] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.223674] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.229041] mousedev: PS/2 mouse device common for all mice [ 2.235052] rtc_cmos 00:01: RTC can wake from S4 [ 2.240023] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 2.246323] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 2.252648] device-mapper: uevent: version 1.0.3 [ 2.257447] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 2.266156] device-mapper: multipath: version 1.2.0 loaded [ 2.267928] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 2.280470] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.287144] EISA: Probing bus 0 at eisa.0 [ 2.291296] EISA: Cannot allocate resource for mainboard [ 2.296732] Cannot allocate resource for EISA slot 1 [ 2.301783] Cannot allocate resource for EISA slot 2 [ 2.306883] Cannot allocate resource for EISA slot 3 [ 2.311986] Cannot allocate resource for EISA slot 4 [ 2.317104] Cannot allocate resource for EISA slot 5 [ 2.322191] Cannot allocate resource for EISA slot 6 [ 2.327296] Cannot allocate resource for EISA slot 7 [ 2.332407] Cannot allocate resource for EISA slot 8 [ 2.337460] EISA: Detected 0 cards. [ 2.341224] cpuidle: using governor ladder [ 2.345457] cpuidle: using governor menu [ 2.349696] TCP cubic registered [ 2.353093] NET: Registered protocol family 10 [ 2.358068] NET: Registered protocol family 17 [ 2.362653] Registering the dns_resolver key type [ 2.364046] usb 4-3: new full speed USB device using ohci_hcd and address 2 [ 2.374578] powernow-k8: Found 1 AMD Athlon(tm) II X2 250 Processor (2 cpu cores) (version 2.20.00) [ 2.383791] powernow-k8: 0 : pstate 0 (3000 MHz) [ 2.388831] powernow-k8: 1 : pstate 1 (2300 MHz) [ 2.393841] powernow-k8: 2 : pstate 2 (1800 MHz) [ 2.398849] powernow-k8: 3 : pstate 3 (800 MHz) [ 2.403824] Using IPI No-Shortcut mode [ 2.407850] PM: Hibernation image not present or could not be loaded. [ 2.407865] registered taskstats version 1 [ 2.412545] Magic number: 3:174:162 [ 2.416560] rtc_cmos 00:01: setting system clock to 2011-11-28 04:11:55 UTC (1322453515) [ 2.424784] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.430930] EDD information not available. [ 2.435261] Freeing unused kernel memory: 700k freed [ 2.440730] Write protecting the kernel text: 5192k [ 2.445965] Write protecting the kernel read-only data: 2068k [ 2.480242] ramzswap: disk size not provided. You can use disksize_kb module param to specify size. [ 2.480246] Using default: (25% of RAM). [ 2.493428] ramzswap: disk size set to 450412 kB [ 2.503124] <30>udev[72]: starting version 167 [ 2.547042] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.554429] ahci 0000:00:11.0: version 3.0 [ 2.554453] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.563151] ahci 0000:00:11.0: irq 41 for MSI/MSI-X [ 2.563257] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.571480] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.580907] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.587899] scsi0 : ahci [ 2.590696] r8169 0000:02:00.0: setting latency timer to 64 [ 2.590779] r8169 0000:02:00.0: irq 42 for MSI/MSI-X [ 2.591123] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xf8006000, ed:0b:00:00:e0:00, XID 083000c0 IRQ 42 [ 2.600931] scsi1 : ahci [ 2.616971] scsi2 : ahci [ 2.622872] scsi3 : ahci [ 2.625879] ata1: SATA max UDMA/133 abar m1024@0xd8409000 port 0xd8409100 irq 41 [ 2.633457] ata2: SATA max UDMA/133 abar m1024@0xd8409000 port 0xd8409180 irq 41 [ 2.640928] ata3: SATA max UDMA/133 abar m1024@0xd8409000 port 0xd8409200 irq 41 [ 2.648461] ata4: SATA max UDMA/133 abar m1024@0xd8409000 port 0xd8409280 irq 41 [ 2.659527] scsi4 : pata_atiixp [ 2.663609] scsi5 : pata_atiixp [ 2.667554] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3010 irq 14 [ 2.674942] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3018 irq 15 [ 2.682108] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 2.878180] input: HID 0ccd:0077 as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.3/input/input3 [ 2.887658] generic-usb 0003:0CCD:0077.0001: input,hidraw0: USB HID v1.00 Device [HID 0ccd:0077] on usb-0000:00:12.1-3/input3 [ 2.909466] input: HID 04d9:1203 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input4 [ 2.918653] generic-usb 0003:04D9:1203.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-0000:00:12.0-1/input0 [ 2.947205] input: HID 04d9:1203 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input5 [ 2.956468] generic-usb 0003:04D9:1203.0003: input,hidraw2: USB HID v1.11 Device [HID 04d9:1203] on usb-0000:00:12.0-1/input1 [ 2.968128] usbcore: registered new interface driver usbhid [ 2.973907] usbhid: USB HID core driver [ 2.980069] ata3: SATA link down (SStatus 0 SControl 300) [ 2.985612] ata2: SATA link down (SStatus 0 SControl 300) [ 2.996029] usb 3-2: new low speed USB device using ohci_hcd and address 3 [ 3.006161] ata4: SATA link down (SStatus 0 SControl 300) [ 3.160050] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.167349] ata1.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133 [ 3.174467] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.181438] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input6 [ 3.181527] generic-usb 0003:046D:C024.0004: input,hidraw3: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:12.0-2/input0 [ 3.206421] ata1.00: configured for UDMA/133 [ 3.211028] scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5 [ 3.219437] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.224942] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.232665] sd 0:0:0:0: [sda] Write Protect is off [ 3.237575] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.237607] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.259506] sda: sda1 sda2 sda3 [ 3.263262] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.726054] Btrfs loaded [ 3.737570] xor: automatically using best checksumming function: pIII_sse [ 3.764019] pIII_sse : 3201.000 MB/sec [ 3.768509] xor: using function: pIII_sse (3201.000 MB/sec) [ 3.780889] device-mapper: dm-raid45: initialized v0.2594b [ 3.789674] md: linear personality registered for level -1 [ 3.801132] md: multipath personality registered for level -4 [ 3.810274] md: raid0 personality registered for level 0 [ 3.824589] md: raid1 personality registered for level 1 [ 3.832942] async_tx: api initialized (async) [ 3.904032] raid6: int32x1 1345 MB/s [ 3.972021] raid6: int32x2 1402 MB/s [ 4.040070] raid6: int32x4 1043 MB/s [ 4.108014] raid6: int32x8 803 MB/s [ 4.176023] raid6: mmxx1 2483 MB/s [ 4.244015] raid6: mmxx2 4697 MB/s [ 4.312034] raid6: sse1x1 2176 MB/s [ 4.380035] raid6: sse1x2 3592 MB/s [ 4.448024] raid6: sse2x1 4149 MB/s [ 4.520032] raid6: sse2x2 6885 MB/s [ 4.523959] raid6: using algorithm sse2x2 (6885 MB/s) [ 4.545270] md: raid6 personality registered for level 6 [ 4.551624] md: raid5 personality registered for level 5 [ 4.557329] md: raid4 personality registered for level 4 [ 4.572376] md: raid10 personality registered for level 10 [ 16.346420] EXT3-fs (dm-0): recovery required on readonly filesystem [ 16.353258] EXT3-fs (dm-0): write access will be enabled during recovery [ 16.382409] EXT3-fs: barriers not enabled [ 17.920337] kjournald starting. Commit interval 5 seconds [ 17.920476] EXT3-fs (dm-0): orphan cleanup on readonly fs [ 17.920482] ext3_orphan_cleanup: deleting unreferenced inode 26924626 [ 17.920511] EXT3-fs (dm-0): 1 orphan inode deleted [ 17.920512] EXT3-fs (dm-0): recovery complete [ 17.950387] EXT3-fs (dm-0): mounted filesystem with ordered data mode [ 41.807682] <30>udev[423]: starting version 167 [ 41.827903] lp: driver loaded but no devices found [ 41.885666] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602 [ 41.885670] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 41.893246] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 42.028134] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMB0 [io 0xb00-0xb0b] [ 42.028137] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 42.064040] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 42.072226] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 42.092417] <30>udev[513]: renamed network interface eth0 to eth5 [ 42.187984] type=1400 audit(1322453555.264:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=716 comm="apparmor_parser" [ 42.188312] type=1400 audit(1322453555.268:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=716 comm="apparmor_parser" [ 42.188483] type=1400 audit(1322453555.268:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=716 comm="apparmor_parser" [ 42.189192] type=1400 audit(1322453555.268:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=683 comm="apparmor_parser" [ 42.189842] type=1400 audit(1322453555.268:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp- client.action" pid=683 comm="apparmor_parser" [ 42.190262] type=1400 audit(1322453555.268:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=683 comm="apparmor_parser" [ 42.195769] cfg80211: Calling CRDA to update world regulatory domain [ 42.293006] cfg80211: World regulatory domain updated: [ 42.293009] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 42.293011] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 42.293013] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 42.293015] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 42.293017] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 42.293019] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 42.385685] ath9k 0000:03:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 42.552877] usbcore: registered new interface driver snd-usb-audio [ 43.959786] ath: EEPROM regdomain: 0x30 [ 43.959788] ath: EEPROM indicates we should expect a direct regpair map [ 43.959790] ath: Country alpha2 being used: AM [ 43.959792] ath: Regpair used: 0x30 [ 43.959906] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 43.959908] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.959910] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 43.959912] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.959914] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 43.959916] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.959917] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 43.959919] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.959921] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 43.959923] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.959924] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 43.959926] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.959928] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 43.959930] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.959931] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 43.959933] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.959935] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 43.959937] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.959938] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 43.959940] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.959942] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 43.959943] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.959945] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 43.959947] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 43.959949] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 43.962455] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 43.962457] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 43.962459] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 43.962461] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 43.962463] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 43.962465] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 43.962467] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 43.962469] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 43.962470] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 43.962472] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 43.962474] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 43.962476] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 43.962478] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 43.962480] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 43.962482] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 43.962484] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 43.962485] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 43.962487] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 43.962489] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 43.962491] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 43.962493] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 43.962495] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 43.962497] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 43.962499] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 43.962500] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 43.962502] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 43.962504] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 43.962506] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 43.970787] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 43.971254] Registered led device: ath9k-phy0::radio [ 43.971268] Registered led device: ath9k-phy0::assoc [ 43.971281] Registered led device: ath9k-phy0::tx [ 43.971296] Registered led device: ath9k-phy0::rx [ 43.971299] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf8440000, irq=21 [ 43.971422] cfg80211: Calling CRDA for country: AM [ 43.985168] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 43.985171] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.985173] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 43.985176] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.985177] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 43.985179] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.985181] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 43.985183] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.985184] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 43.985186] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.985188] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 43.985189] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.985191] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 43.985193] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.985194] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 43.985196] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.985198] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 43.985200] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.985201] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 43.985203] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.985205] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 43.985207] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.985208] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 43.985210] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.985212] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 43.985214] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 43.985215] cfg80211: Disabling freq 2484 MHz [ 43.985218] cfg80211: Regulatory domain changed to country: AM [ 43.985219] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 43.985221] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 43.985222] cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm) [ 43.985224] cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm) [ 44.068231] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 44.213372] EXT3-fs (dm-0): using internal journal [ 44.721119] EXT3-fs: barriers not enabled [ 44.721749] kjournald starting. Commit interval 5 seconds [ 44.775506] EXT3-fs (sda2): using internal journal [ 44.775515] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 44.824766] RPC: Registered udp transport module. [ 44.824769] RPC: Registered tcp transport module. [ 44.824770] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 44.834537] FS-Cache: Loaded [ 44.863058] FS-Cache: Netfs 'nfs' registered for caching [ 44.906194] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 44.963589] type=1400 audit(1322453558.040:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1047 comm="apparmor_parser" [ 44.963867] type=1400 audit(1322453558.040:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp- client.action" pid=1047 comm="apparmor_parser" [ 44.964245] type=1400 audit(1322453558.044:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1047 comm="apparmor_parser" [ 44.972367] type=1400 audit(1322453558.052:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1049 comm="apparmor_parser" [ 45.078531] wlan0: authenticate with 00:24:01:63:89:bd (try 1) [ 45.080800] wlan0: authenticated [ 45.080823] wlan0: associate with 00:24:01:63:89:bd (try 1) [ 45.083291] wlan0: RX AssocResp from 00:24:01:63:89:bd (capab=0x401 status=0 aid=2) [ 45.083294] wlan0: associated [ 45.083608] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 45.097598] ppdev: user-space parallel port driver [ 45.582849] kvm: Nested Virtualization enabled [ 45.809676] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 45.834999] [drm] Initialized drm 1.1.0 20060810 [ 45.864594] [drm] radeon defaulting to kernel modesetting. [ 45.864597] [drm] radeon kernel modesetting enabled. [ 45.864657] radeon 0000:01:05.0: setting latency timer to 64 [ 45.867133] [drm] initializing kernel modesetting (RS880 0x1002:0x9710). [ 45.867160] [drm] register mmio base: 0xD8100000 [ 45.867162] [drm] register mmio size: 65536 [ 45.867239] ATOM BIOS: B43106 [ 45.867270] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used) [ 45.867272] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 45.867628] [drm] Detected VRAM RAM=256M, BAR=256M [ 45.867631] [drm] RAM width 32bits DDR [ 45.875994] [TTM] Zone kernel: Available graphics memory: 438016 kiB. [ 45.875996] [TTM] Zone highmem: Available graphics memory: 900832 kiB. [ 45.876015] [TTM] Initializing pool allocator. [ 45.876088] [drm] radeon: 256M of VRAM memory ready [ 45.876089] [drm] radeon: 512M of GTT memory ready. [ 45.876105] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 45.876106] [drm] Driver supports precise vblank timestamp query. [ 45.876140] [drm] radeon: irq initialized. [ 45.876142] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 45.876988] [drm] Loading RS780 Microcode [ 45.876990] radeon_cp.0: Missing Free firmware [ 45.915550] [drm:r600_startup] *ERROR* Failed to load firmware! [ 45.921989] radeon 0000:01:05.0: disabling GPU acceleration [ 45.928744] radeon 0000:01:05.0: ef428800 unpin not necessary [ 45.928750] radeon 0000:01:05.0: ef428800 unpin not necessary [ 45.928757] [drm] Enabling audio support [ 45.928766] failed to evaluate ATIF got AE_BAD_PARAMETER [ 45.929090] [drm] Radeon Display Connectors [ 45.929094] [drm] Connector 0: [ 45.929097] [drm] VGA [ 45.929101] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 45.929104] [drm] Encoders: [ 45.929107] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 45.929110] [drm] Connector 1: [ 45.929112] [drm] HDMI-A [ 45.929114] [drm] HPD3 [ 45.929118] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 45.929121] [drm] Encoders: [ 45.929124] [drm] DFP3: INTERNAL_KLDSCP_LVTMA [ 45.993047] [drm] radeon: power management initialized [ 46.117232] [drm] fb mappable at 0xC0040000 [ 46.117237] [drm] vram apper at 0xC0000000 [ 46.117240] [drm] size 5324800 [ 46.117243] [drm] fb depth is 24 [ 46.117246] [drm] pitch is 5888 [ 46.119045] fbcon: radeondrmfb (fb0) is primary device [ 46.122246] Console: switching to colour frame buffer device 180x56 [ 46.122257] fb0: radeondrmfb frame buffer device [ 46.122261] drm: registered panic notifier [ 46.122271] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0 [ 55.584060] wlan0: no IPv6 routers present
This dmesg was made after booting from coreboot which contained the following commits: 2687844 M4A785T-M: fix ACPI's P-States Table 1eb55d0 Add ASUS M4A785T-M mainboard support e8d0122 RS780: print the vgainfo 0dbfb54 Remove unused code files and cosmetic changes (HEAD from master)
Denis.