Selon Myles Watson mylesgw@gmail.com:
Note that I'm facing this on 3 boards. The 4th one is working
properly.
On each non working board, some bits are wrong, but they are not the
same, on
each board.
My best guess would be a timing issue. Is there a way that you can
lengthen
the default delays to something safer but not too painful (2x or 3x) and
try
again?
I can try, yes, but which timing to modify ? What variable to update ?
I don't know. I'm assuming that all 4 boards that you're talking about are the same, or at least have the same chipsets.
Exactly the same boards.
Given that I would look at the actual flash routines that get used and see if there are timing parameters that you can play with.
I checked the code, there is no timing...
From what I saw, flashrom just waits for the status returned by the flash
itself.
I'm just not that knowledgeable about flashrom. I was hoping I could point you in the right direction since you weren't getting other responses.
Thanks, Myles
Thx for the idea, anyway.
Stephan.