Idwer Vollering (vidwer@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/416
-gerrit
commit 8c63d8f92ae4e63b2e8f8dcc2623e574d18acbab Author: Idwer Vollering vidwer@gmail.com Date: Mon Nov 7 17:48:33 2011 +0100
Make the installation section Makefile of inteltool and superiotool more flexible.
Change-Id: I0a85cb469bd1188fcd4e88df59380ffa5828496f Signed-off-by: Idwer Vollering vidwer@gmail.com --- src/southbridge/intel/i82801ex/chip.h | 1 - src/southbridge/intel/i82801ex/early_smbus.c | 32 ++++++++------ src/southbridge/intel/i82801ex/ehci.c | 8 ++- src/southbridge/intel/i82801ex/i82801ex.c | 12 +++--- src/southbridge/intel/i82801ex/i82801ex.h | 26 +++++++++--- src/southbridge/intel/i82801ex/ide.c | 15 +++---- src/southbridge/intel/i82801ex/lpc.c | 59 +++++++++++++------------- src/southbridge/intel/i82801ex/pci.c | 20 +++++---- src/southbridge/intel/i82801ex/sata.c | 35 +++++++++------- src/southbridge/intel/i82801ex/smbus.c | 3 +- src/southbridge/intel/i82801ex/smbus.h | 6 ++- src/southbridge/intel/i82801ex/uhci.c | 1 - src/southbridge/intel/i82801ex/watchdog.c | 10 +++-- src/superio/winbond/w83627thg/early_serial.c | 11 +++++ src/superio/winbond/w83627thg/w83627thg.h | 2 + util/inteltool/Makefile | 2 +- util/superiotool/Makefile | 2 +- 17 files changed, 143 insertions(+), 102 deletions(-)
diff --git a/src/southbridge/intel/i82801ex/chip.h b/src/southbridge/intel/i82801ex/chip.h index f04fc3f..544b6f7 100644 --- a/src/southbridge/intel/i82801ex/chip.h +++ b/src/southbridge/intel/i82801ex/chip.h @@ -33,4 +33,3 @@ struct southbridge_intel_i82801ex_config extern struct chip_operations southbridge_intel_i82801ex_ops;
#endif /* I82801EX_CHIP_H */ - diff --git a/src/southbridge/intel/i82801ex/early_smbus.c b/src/southbridge/intel/i82801ex/early_smbus.c index cdf1f62..b9c3849 100644 --- a/src/southbridge/intel/i82801ex/early_smbus.c +++ b/src/southbridge/intel/i82801ex/early_smbus.c @@ -1,21 +1,25 @@ +#include "i82801ex.h" #include "smbus.h"
-#define SMBUS_IO_BASE 0x0f00 - static void enable_smbus(void) { device_t dev = PCI_DEV(0x0, 0x1f, 0x3);
print_spew("SMBus controller enabled\n");
- pci_write_config32(dev, 0x20, SMBUS_IO_BASE | 1); - print_debug_hex32(pci_read_config32(dev, 0x20)); + /* bit 0 is read only and hardwired to 1 */ + pci_write_config32(dev, SMB_BASE, SMBUS_IO_BASE); + print_debug("SMB_BASE = 0x"); + /* don't show bit 0 */ + print_debug_hex32(pci_read_config32(dev, SMB_BASE) & 0xfffffffe); + print_debug("\n"); + /* Set smbus enable */ - pci_write_config8(dev, 0x40, 1); + pci_write_config8(dev, HOSTC, 1); /* Set smbus iospace enable */ - pci_write_config8(dev, 0x4, 1); + pci_write_config8(dev, PCICMD, 1); /* SMBALERT_DIS */ - pci_write_config8(dev, 0x11, 4); + pci_write_config8(dev, SLV_CMD, 4);
/* Disable interrupt generation */ outb(0, SMBUS_IO_BASE + SMBHSTCTL); @@ -81,7 +85,7 @@ static int smbus_write_block(unsigned device, unsigned length, unsigned cmd, /* setup transaction */ /* Obtain ownership */ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); - for(stat=0;(stat&0x40)==0;) { + for (stat = 0; (stat & 0x40) == 0;) { stat = inb(SMBUS_IO_BASE + SMBHSTSTAT); } /* clear the done bit */ @@ -99,13 +103,13 @@ static int smbus_write_block(unsigned device, unsigned length, unsigned cmd, outb(length & 0xFF, SMBUS_IO_BASE + SMBHSTDAT0);
/* try sending out the first byte of data here */ - byte=(data1>>(0))&0x0ff; - outb(byte,SMBUS_IO_BASE + SMBBLKDAT); + byte = (data1 >> (0) ) & 0x0ff; + outb(byte, SMBUS_IO_BASE + SMBBLKDAT); /* issue a block write command */ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x5 << 2) | 0x40, SMBUS_IO_BASE + SMBHSTCTL);
- for(i=0;i<length;i++) { + for(i = 0; i < length; i++) {
/* poll for transaction completion */ if (smbus_wait_until_blk_done(SMBUS_IO_BASE) < 0) { @@ -113,10 +117,10 @@ static int smbus_write_block(unsigned device, unsigned length, unsigned cmd, }
/* load the next byte */ - if(i>3) - byte=(data2>>(i%4))&0x0ff; + if(i > 3) + byte= (data2 >> (i % 4)) & 0x0ff; else - byte=(data1>>(i))&0x0ff; + byte=(data1 >> (i)) & 0x0ff; outb(byte,SMBUS_IO_BASE + SMBBLKDAT);
/* clear the done bit */ diff --git a/src/southbridge/intel/i82801ex/ehci.c b/src/southbridge/intel/i82801ex/ehci.c index 8ae921d..4117c4e 100644 --- a/src/southbridge/intel/i82801ex/ehci.c +++ b/src/southbridge/intel/i82801ex/ehci.c @@ -5,6 +5,8 @@ #include <device/pci_ops.h> #include "i82801ex.h"
+#define ACCESS_CNTL 0x80 + static void ehci_init(struct device *dev) { uint32_t cmd; @@ -20,14 +22,14 @@ static void ehci_init(struct device *dev) static void ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device) { uint8_t access_cntl; - access_cntl = pci_read_config8(dev, 0x80); + access_cntl = pci_read_config8(dev, ACCESS_CNTL); /* Enable writes to protected registers */ - pci_write_config8(dev, 0x80, access_cntl | 1); + pci_write_config8(dev, ACCESS_CNTL, access_cntl | 1); /* Write the subsystem vendor and device id */ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, ((device & 0xffff) << 16) | (vendor & 0xffff)); /* Restore protection */ - pci_write_config8(dev, 0x80, access_cntl); + pci_write_config8(dev, ACCESS_CNTL, access_cntl); }
static struct pci_operations lops_pci = { diff --git a/src/southbridge/intel/i82801ex/i82801ex.c b/src/southbridge/intel/i82801ex/i82801ex.c index fc41645..a30e887 100644 --- a/src/southbridge/intel/i82801ex/i82801ex.c +++ b/src/southbridge/intel/i82801ex/i82801ex.c @@ -12,13 +12,13 @@ void i82801ex_enable(device_t dev)
/* See if we are behind the i82801ex pci bridge */ lpc_dev = dev_find_slot(dev->bus->secondary, PCI_DEVFN(0x1f, 0)); - if((dev->path.pci.devfn &0xf8)== 0xf8) { + if((dev->path.pci.devfn & 0xf8) == 0xf8) { index = dev->path.pci.devfn & 7; } - else if((dev->path.pci.devfn &0xf8)== 0xe8) { - index = (dev->path.pci.devfn & 7) +8; + else if((dev->path.pci.devfn & 0xf8) == 0xe8) { + index = (dev->path.pci.devfn & 7) + 8; } - if ((!lpc_dev) || (index >= 16) || ((1<<index)&0x3091)) { + if ((!lpc_dev) || (index >= 16) || ((1 << index) & 0x3091)) { return; } if ((lpc_dev->vendor != PCI_VENDOR_ID_INTEL) || @@ -31,13 +31,13 @@ void i82801ex_enable(device_t dev) } }
- reg = reg_old = pci_read_config16(lpc_dev, 0xf2); + reg = reg_old = pci_read_config16(lpc_dev, FUNC_DIS); reg &= ~(1 << index); if (!dev->enabled) { reg |= (1 << index); } if (reg != reg_old) { - pci_write_config16(lpc_dev, 0xf2, reg); + pci_write_config16(lpc_dev, FUNC_DIS, reg); }
} diff --git a/src/southbridge/intel/i82801ex/i82801ex.h b/src/southbridge/intel/i82801ex/i82801ex.h index 67fecdd..137b346 100644 --- a/src/southbridge/intel/i82801ex/i82801ex.h +++ b/src/southbridge/intel/i82801ex/i82801ex.h @@ -5,11 +5,25 @@
extern void i82801ex_enable(device_t dev);
-#define PCI_DMA_CFG 0x90 -#define SERIRQ_CNTL 0x64 -#define GEN_CNTL 0xd0 -#define GEN_STS 0xd4 -#define RTC_CONF 0xd8 -#define GEN_PMCON_3 0xa4 +#define PCICMD 0x4 + +#define ACPI_CNTL 0x44 +#define SERIRQ_CNTL 0x64 +#define PCI_DMA_CFG 0x90 +#define GEN_PMCON_3 0xa4 +#define SATA_RD_CFG 0xae +#define GEN_CNTL 0xd0 +#define GEN_STA 0xd4 +#define RTC_CONF 0xd8 +#define GPIO_CNTL 0x5c +#define LPC_EN 0xe6 +#define FUNC_DIS 0xf2 + +/* IDE, SATA */ +#define IDE_TIMP 0x40 +#define IDE_TIMS 0x42 +#define SDMA_CNT 0x48 +#define SDMA_TIM 0x4a +#define IDE_CONFIG 0x54
#endif /* I82801EX_H */ diff --git a/src/southbridge/intel/i82801ex/ide.c b/src/southbridge/intel/i82801ex/ide.c index bbab6f1..b67ae7a 100644 --- a/src/southbridge/intel/i82801ex/ide.c +++ b/src/southbridge/intel/i82801ex/ide.c @@ -7,18 +7,18 @@
static void ide_init(struct device *dev) { - /* Enable IDE devices and timmings */ - pci_write_config16(dev, 0x40, 0x0a307); // IDE0 - pci_write_config16(dev, 0x42, 0x0a307); // IDE1 - pci_write_config8(dev, 0x48, 0x05); - pci_write_config16(dev, 0x4a, 0x0101); - pci_write_config16(dev, 0x54, 0x5055); + /* Enable IDE devices and timings */ + pci_write_config16(dev, IDE_TIMP, 0x0a307); + pci_write_config16(dev, IDE_TIMS, 0x0a307); + pci_write_config8(dev, SDMA_CNT, 0x05); + pci_write_config16(dev, SDMA_TIM, 0x0101); + pci_write_config16(dev, IDE_CONFIG, 0x5055); printk(BIOS_DEBUG, "IDE Enabled\n"); }
static void i82801ex_ide_set_subsystem(device_t dev, unsigned vendor, unsigned device) { - /* This value is also visible in uchi[0-2] and smbus functions */ + /* This value is also visible in uhci[0-2] and smbus functions */ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, ((device & 0xffff) << 16) | (vendor & 0xffff)); } @@ -40,4 +40,3 @@ static const struct pci_driver ide_driver __pci_driver = { .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_82801ER_IDE, }; - diff --git a/src/southbridge/intel/i82801ex/lpc.c b/src/southbridge/intel/i82801ex/lpc.c index 998360c..d57517f 100644 --- a/src/southbridge/intel/i82801ex/lpc.c +++ b/src/southbridge/intel/i82801ex/lpc.c @@ -12,33 +12,32 @@ #include <arch/ioapic.h> #include "i82801ex.h"
-#define ACPI_BAR 0x40 -#define GPIO_BAR 0x58 +#define ACPI_BAR 0x40 +#define GPIO_BAR 0x58 +#define PIRQ_ABCD_OUT 0x60 +#define PIRQ_EFGH_OUT 0x68
-#define NMI_OFF 0 -#define MAINBOARD_POWER_OFF 0 -#define MAINBOARD_POWER_ON 1 +#define NMI_OFF 0 +#define MAINBOARD_POWER_OFF 0 +#define MAINBOARD_POWER_ON 1
#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL #define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON #endif
-#define SERIRQ_CNTL 0x64 static void i82801ex_enable_serial_irqs(device_t dev) { /* set packet length and toggle silent mode bit */ - pci_write_config8(dev, SERIRQ_CNTL, (1 << 7)|(1 << 6)|((21 - 17) << 2)|(0 << 0)); - pci_write_config8(dev, SERIRQ_CNTL, (1 << 7)|(0 << 6)|((21 - 17) << 2)|(0 << 0)); + pci_write_config8(dev, SERIRQ_CNTL, (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0)); + pci_write_config8(dev, SERIRQ_CNTL, (1 << 7) | (0 << 6) | ((21 - 17) << 2) | (0 << 0)); }
-#define PCI_DMA_CFG 0x90 static void i82801ex_pci_dma_cfg(device_t dev) { /* Set PCI DMA CFG to lpc I/F DMA */ pci_write_config16(dev, PCI_DMA_CFG, 0xfcff); }
-#define LPC_EN 0xe6 static void i82801ex_enable_lpc(device_t dev) { /* lpc i/f enable */ @@ -169,10 +168,10 @@ static void i82801ex_pirq_init(device_t dev) config = dev->chip_info;
if(config->pirq_a_d) { - pci_write_config32(dev, 0x60, config->pirq_a_d); + pci_write_config32(dev, PIRQ_ABCD_OUT, config->pirq_a_d); } if(config->pirq_e_h) { - pci_write_config32(dev, 0x68, config->pirq_e_h); + pci_write_config32(dev, PIRQ_EFGH_OUT, config->pirq_e_h); } }
@@ -230,25 +229,25 @@ static void enable_hpet(struct device *dev) */
dword &= ~(3 << 15); /* clear it */ - dword |= (code<<15); + dword |= (code << 15); pci_write_config32(dev, GEN_CNTL, dword);
- printk(BIOS_DEBUG, "enabling HPET @0x%lx\n", hpet_address | (code <<12) ); + printk(BIOS_DEBUG, "enabling HPET @0x%lx\n", hpet_address | (code << 12) ); }
static void lpc_init(struct device *dev) { uint8_t byte; uint32_t value; - int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; + int pwr_on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
/* IO APIC initialization */ - value = pci_read_config32(dev, 0xd0); - value |= (1 << 8)|(1<<7)|(1<<1); - pci_write_config32(dev, 0xd0, value); - value = pci_read_config32(dev, 0xd4); - value |= (1<<1); - pci_write_config32(dev, 0xd4, value); + value = pci_read_config32(dev, GEN_CNTL); + value |= (1 << 8) | (1 << 7) | (1 << 1); + pci_write_config32(dev, GEN_CNTL, value); + value = pci_read_config32(dev, GEN_STA); + value |= (1 << 1); + pci_write_config32(dev, GEN_STA, value); setup_ioapic(IO_APIC_ADDR, 0); // Don't rename IO APIC ID.
i82801ex_enable_serial_irqs(dev); @@ -258,16 +257,16 @@ static void lpc_init(struct device *dev) i82801ex_enable_lpc(dev);
/* Clear SATA to non raid */ - pci_write_config8(dev, 0xae, 0x00); + pci_write_config8(dev, SATA_RD_CFG, 0x00);
get_option(&pwr_on, "power_on_after_fail"); - byte = pci_read_config8(dev, 0xa4); + byte = pci_read_config8(dev, GEN_PMCON_3); byte &= 0xfe; if (!pwr_on) { byte |= 1; } - pci_write_config8(dev, 0xa4, byte); - printk(BIOS_INFO, "set power %s after power fail\n", pwr_on?"on":"off"); + pci_write_config8(dev, GEN_PMCON_3, byte); + printk(BIOS_INFO, "set power %s after power fail\n", pwr_on ? "on" : "off");
/* Set up the PIRQ */ i82801ex_pirq_init(dev); @@ -282,7 +281,7 @@ static void lpc_init(struct device *dev) isa_dma_init();
/* Disable IDE (needed when sata is enabled) */ - pci_write_config8(dev, 0xf2, 0x60); + pci_write_config8(dev, FUNC_DIS, 0x60);
enable_hpet(dev); } @@ -327,14 +326,14 @@ static void i82801ex_lpc_enable_resources(device_t dev) pci_dev_enable_resources(dev);
/* Enable the ACPI bar */ - acpi_cntl = pci_read_config8(dev, 0x44); + acpi_cntl = pci_read_config8(dev, ACPI_CNTL); acpi_cntl |= (1 << 4); - pci_write_config8(dev, 0x44, acpi_cntl); + pci_write_config8(dev, ACPI_CNTL, acpi_cntl);
/* Enable the GPIO bar */ - gpio_cntl = pci_read_config8(dev, 0x5c); + gpio_cntl = pci_read_config8(dev, GPIO_CNTL); gpio_cntl |= (1 << 4); - pci_write_config8(dev, 0x5c, gpio_cntl); + pci_write_config8(dev, GPIO_CNTL, gpio_cntl); }
static struct pci_operations lops_pci = { diff --git a/src/southbridge/intel/i82801ex/pci.c b/src/southbridge/intel/i82801ex/pci.c index 80c6e49..4c8254e 100644 --- a/src/southbridge/intel/i82801ex/pci.c +++ b/src/southbridge/intel/i82801ex/pci.c @@ -5,27 +5,30 @@ #include <device/pci_ops.h> #include "i82801ex.h"
+#define PCISTS 0x6 +#define SECSTS 0x1e + static void pci_init(struct device *dev) { uint16_t word;
/* Clear system errors */ - word = pci_read_config16(dev, 0x06); + word = pci_read_config16(dev, PCISTS); word |= 0xf900; /* Clear possible errors */ - pci_write_config16(dev, 0x06, word); + pci_write_config16(dev, PCISTS, word);
#if 0 /* System error enable */ uint32_t dword; - dword = pci_read_config32(dev, 0x04); - dword |= (1<<8); /* SERR# Enable */ - dword |= (1<<6); /* Parity Error Response */ - pci_write_config32(dev, 0x04, dword); + dword = pci_read_config32(dev, PCICMD); + dword |= (1 << 8); /* SERR# Enable */ + dword |= (1 << 6); /* Parity Error Response */ + pci_write_config32(dev, PCICMD, dword); #endif
- word = pci_read_config16(dev, 0x1e); + word = pci_read_config16(dev, SECSTS); word |= 0xf800; /* Clear possible errors */ - pci_write_config16(dev, 0x1e, word); + pci_write_config16(dev, SECSTS, word); }
static struct device_operations pci_ops = { @@ -42,4 +45,3 @@ static const struct pci_driver pci_driver __pci_driver = { .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_82801ER_PCI, }; - diff --git a/src/southbridge/intel/i82801ex/sata.c b/src/southbridge/intel/i82801ex/sata.c index 9b340e9..0ac709f 100644 --- a/src/southbridge/intel/i82801ex/sata.c +++ b/src/southbridge/intel/i82801ex/sata.c @@ -5,35 +5,41 @@ #include <device/pci_ops.h> #include "i82801ex.h"
+#define SATA_PI 0x9 +#define SATA_MAP 0x90 +#define SATA_PCS 0x92 +#define SATA_SRI 0xa0 +#define SATA_SRD 0xa4 + static void sata_init(struct device *dev) { printk(BIOS_DEBUG, "SATA init\n"); /* SATA configuration */ - pci_write_config8(dev, 0x04, 0x07); - pci_write_config8(dev, 0x09, 0x8f); + pci_write_config8(dev, PCICMD, 0x07); + pci_write_config8(dev, SATA_PI, 0x8f);
- /* Set timmings */ - pci_write_config16(dev, 0x40, 0x0a307); - pci_write_config16(dev, 0x42, 0x0a307); + /* Set timings */ + pci_write_config16(dev, IDE_TIMP, 0x0a307); + pci_write_config16(dev, IDE_TIMS, 0x0a307);
/* Sync DMA */ - pci_write_config16(dev, 0x48, 0x000f); - pci_write_config16(dev, 0x4a, 0x1111); + pci_write_config16(dev, SDMA_CNT, 0x000f); + pci_write_config16(dev, SDMA_TIM, 0x1111);
/* 66 mhz */ - pci_write_config16(dev, 0x54, 0xf00f); + pci_write_config16(dev, IDE_CONFIG, 0xf00f);
/* Combine ide - sata configuration */ - pci_write_config8(dev, 0x90, 0x0); + pci_write_config8(dev, SATA_MAP, 0x0);
/* port 0 & 1 enable */ - pci_write_config8(dev, 0x92, 0x33); + pci_write_config8(dev, SATA_PCS, 0x33);
/* initialize SATA */ - pci_write_config16(dev, 0xa0, 0x0018); - pci_write_config32(dev, 0xa4, 0x00000264); - pci_write_config16(dev, 0xa0, 0x0040); - pci_write_config32(dev, 0xa4, 0x00220043); + pci_write_config16(dev, SATA_SRI, 0x0018); + pci_write_config32(dev, SATA_SRD, 0x00000264); + pci_write_config16(dev, SATA_SRI, 0x0040); + pci_write_config32(dev, SATA_SRD, 0x00220043);
}
@@ -57,4 +63,3 @@ static const struct pci_driver sata_driver_nr __pci_driver = { .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_82801EB_SATA, }; - diff --git a/src/southbridge/intel/i82801ex/smbus.c b/src/southbridge/intel/i82801ex/smbus.c index 6bb4899..eb2794c 100644 --- a/src/southbridge/intel/i82801ex/smbus.c +++ b/src/southbridge/intel/i82801ex/smbus.c @@ -16,7 +16,7 @@ static int lsmbus_read_byte(device_t dev, u8 address)
device = dev->path.i2c.device; pbus = get_pbus_smbus(dev); - res = find_resource(pbus->dev, 0x20); + res = find_resource(pbus->dev, SMB_BASE);
return do_smbus_read_byte(res->base, device, address); } @@ -46,4 +46,3 @@ static const struct pci_driver smbus_driver __pci_driver = { .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_82801ER_SMB, }; - diff --git a/src/southbridge/intel/i82801ex/smbus.h b/src/southbridge/intel/i82801ex/smbus.h index f330c0a..a9167d2 100644 --- a/src/southbridge/intel/i82801ex/smbus.h +++ b/src/southbridge/intel/i82801ex/smbus.h @@ -1,5 +1,10 @@ #include <device/smbus_def.h>
+#define SMBUS_IO_BASE 0xf00 +#define SMB_BASE 0x20 +#define SLV_CMD 0x11 +#define HOSTC 0x40 + #define SMBHSTSTAT 0x0 #define SMBHSTCTL 0x2 #define SMBHSTCMD 0x3 @@ -102,4 +107,3 @@ static int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned } return byte; } - diff --git a/src/southbridge/intel/i82801ex/uhci.c b/src/southbridge/intel/i82801ex/uhci.c index 56536b7..c9cf82e 100644 --- a/src/southbridge/intel/i82801ex/uhci.c +++ b/src/southbridge/intel/i82801ex/uhci.c @@ -53,4 +53,3 @@ static const struct pci_driver usb3_driver __pci_driver = { .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_82801ER_USB3, }; - diff --git a/src/southbridge/intel/i82801ex/watchdog.c b/src/southbridge/intel/i82801ex/watchdog.c index 26f6644..3f02f61 100644 --- a/src/southbridge/intel/i82801ex/watchdog.c +++ b/src/southbridge/intel/i82801ex/watchdog.c @@ -3,6 +3,9 @@ #include <arch/io.h> #include <device/device.h> #include <device/pci.h> +#include "i82801ex.h" + +#define PMBASE 0x40
void watchdog_off(void) { @@ -12,11 +15,11 @@ void watchdog_off(void) /* turn off the ICH5 watchdog */ dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); /* Enable I/O space */ - value = pci_read_config16(dev, 0x04); + value = pci_read_config16(dev, PCICMD); value |= (1 << 10); - pci_write_config16(dev, 0x04, value); + pci_write_config16(dev, PCICMD, value); /* Get TCO base */ - base = (pci_read_config32(dev, 0x40) & 0x0fffe) + 0x60; + base = (pci_read_config32(dev, PMBASE) & 0x0fffe) + 0x60; /* Disable the watchdog timer */ value = inw(base + 0x08); value |= 1 << 11; @@ -26,4 +29,3 @@ void watchdog_off(void) outw(0x0002, base + 0x06); printk(BIOS_DEBUG, "Watchdog ICH5 disabled\n"); } - diff --git a/src/superio/winbond/w83627thg/early_serial.c b/src/superio/winbond/w83627thg/early_serial.c index 559e982..b80e514 100644 --- a/src/superio/winbond/w83627thg/early_serial.c +++ b/src/superio/winbond/w83627thg/early_serial.c @@ -45,3 +45,14 @@ static void inline w83627thg_enable_serial(device_t dev, u16 iobase) pnp_set_enable(dev, 1); pnp_exit_ext_func_mode(dev); } + +#ifndef __ROMCC__ +void w83627thg_set_clksel_48(device_t dev) { + u8 reg8; + pnp_enter_ext_func_mode(dev); + reg8 = pnp_read_config(dev, 0x24); + reg8 |= (1 << 6); /* Set CLKSEL (clock input on pin 1) to 48MHz. */ + pnp_write_config(dev, 0x24, reg8); + pnp_exit_ext_func_mode(dev); +} +#endif diff --git a/src/superio/winbond/w83627thg/w83627thg.h b/src/superio/winbond/w83627thg/w83627thg.h index 73be544..99ff565 100644 --- a/src/superio/winbond/w83627thg/w83627thg.h +++ b/src/superio/winbond/w83627thg/w83627thg.h @@ -34,4 +34,6 @@ #define W83627THG_ACPI 10 #define W83627THG_HWM 11 /* Hardware monitor */
+void w83627thg_set_clksel_48(device_t dev); + #endif diff --git a/util/inteltool/Makefile b/util/inteltool/Makefile index db7fca0..0ba11d6 100644 --- a/util/inteltool/Makefile +++ b/util/inteltool/Makefile @@ -22,7 +22,7 @@ PROGRAM = inteltool
CC = gcc -INSTALL = /usr/bin/install +INSTALL = install PREFIX = /usr/local CFLAGS = -O2 -g -Wall -W LDFLAGS = -lpci -lz diff --git a/util/superiotool/Makefile b/util/superiotool/Makefile index 5cc7650..f485a50 100644 --- a/util/superiotool/Makefile +++ b/util/superiotool/Makefile @@ -21,7 +21,7 @@ PROGRAM = superiotool
CC = gcc -INSTALL = /usr/bin/install +INSTALL = install PREFIX = /usr/local
# Set the superiotool version string from the highest revision number