[coreboot] [commit] r6508 - in trunk/payloads/libpayload: drivers include

[repository service]

Author: stepan
Date: Sat Apr 16 02:13:17 2011
New Revision: 6508
URL: https://tracker.coreboot.org/trac/coreboot/changeset/6508

Log:
Allow libpayload to use an OXPCIe 952 card on systems without                                                                                                                                                                                                            
onboard serial port

Signed-off-by: Stefan Reinauer                                                                                                                                                                                                                      
Acked-by:  Marc Jones

Modified:
   trunk/payloads/libpayload/drivers/serial.c
   trunk/payloads/libpayload/include/libpayload.h
   trunk/payloads/libpayload/include/sysinfo.h

Modified: trunk/payloads/libpayload/drivers/serial.c
==============================================================================
--- trunk/payloads/libpayload/drivers/serial.c	Sat Apr 16 02:09:53 2011	(r6507)
+++ trunk/payloads/libpayload/drivers/serial.c	Sat Apr 16 02:13:17 2011	(r6508)
@@ -32,9 +32,11 @@
 #include <libpayload.h>

#define IOBASE lib_sysinfo.ser_ioport
+#define MEMBASE (phys_to_virt(lib_sysinfo.ser_base))
 #define DIVISOR(x) (115200 / x)

-void serial_hardware_init(int port, int speed, int word_bits, int parity, int stop_bits)
+#ifdef CONFIG_SERIAL_SET_SPEED
+static void serial_io_hardware_init(int port, int speed, int word_bits, int parity, int stop_bits)
 {
    unsigned char reg;

@@ -58,6 +60,31 @@
    outb(reg & ~0x80, port + 0x03);
 }

+static void serial_mem_hardware_init(int port, int speed, int word_bits, int parity, int stop_bits)
+{
+	unsigned char reg;
+
+	/* We will assume 8n1 for now. Does anyone use anything else these days? */
+
+	/* Disable interrupts. */
+	writeb(0, MEMBASE + 0x01);
+
+	/* Assert RTS and DTR. */
+	writeb(3, MEMBASE + 0x04);
+
+	/* Set the divisor latch. */
+	reg = readb(MEMBASE + 0x03);
+	writeb(reg | 0x80, MEMBASE + 0x03);
+
+	/* Write the divisor. */
+	writeb(DIVISOR(speed) & 0xFF, MEMBASE);
+	writeb(DIVISOR(speed) >> 8 & 0xFF, MEMBASE + 1);
+
+	/* Restore the previous value of the divisor. */
+	writeb(reg & ~0x80, MEMBASE + 0x03);
+}
+#endif
+
 static struct console_input_driver consin = {
    .havekey = serial_havechar,
    .getchar = serial_getchar
@@ -69,31 +96,84 @@

void serial_init(void)
 {
+	pcidev_t oxpcie_dev;
+	if (pci_find_device(0x1415, 0xc158, &oxpcie_dev)) {
+		lib_sysinfo.ser_base = pci_read_resource(oxpcie_dev, 0) + 0x1000;
+	} else {
+		lib_sysinfo.ser_base = 0;
+	}
+
 #ifdef CONFIG_SERIAL_SET_SPEED
-	serial_hardware_init(IOBASE, CONFIG_SERIAL_BAUD_RATE, 8, 0, 1);
+	if (lib_sysinfo.ser_base)
+		serial_mem_hardware_init(IOBASE, CONFIG_SERIAL_BAUD_RATE, 8, 0, 1);
+	else
+		serial_io_hardware_init(IOBASE, CONFIG_SERIAL_BAUD_RATE, 8, 0, 1);
 #endif
    console_add_input_driver(&consin);
    console_add_output_driver(&consout);
 }

-void serial_putchar(unsigned int c)
+static void serial_io_putchar(unsigned int c)
 {
    c &= 0xff;
    while ((inb(IOBASE + 0x05) & 0x20) == 0) ;
    outb(c, IOBASE);
 }

-int serial_havechar(void)
+static int serial_io_havechar(void)
 {
    return inb(IOBASE + 0x05) & 0x01;
 }

-int serial_getchar(void)
+static int serial_io_getchar(void)
 {
-	while (!serial_havechar()) ;
+	while (!serial_io_havechar()) ;
    return (int)inb(IOBASE);
 }

+static void serial_mem_putchar(unsigned int c)
+{
+	c &= 0xff;
+	while ((readb(MEMBASE + 0x05) & 0x20) == 0) ;
+	writeb(c, MEMBASE);
+}
+
+static int serial_mem_havechar(void)
+{
+	return readb(MEMBASE + 0x05) & 0x01;
+}
+
+static int serial_mem_getchar(void)
+{
+	while (!serial_mem_havechar()) ;
+	return (int)readb(MEMBASE);
+}
+
+
+void serial_putchar(unsigned int c)
+{
+	if (lib_sysinfo.ser_base)
+		serial_mem_putchar(c);
+	else
+		serial_io_putchar(c);
+}
+
+int serial_havechar(void)
+{
+	if (lib_sysinfo.ser_base)
+		return serial_mem_havechar();
+	else
+		return serial_io_havechar();
+}
+
+int serial_getchar(void)
+{
+	if (lib_sysinfo.ser_base)
+		return serial_mem_getchar();
+	else
+		return serial_io_getchar();
+}
+
 /*  These are thinly veiled vt100 functions used by curses */

#define VT100_CLEAR       "\e[H\e[J"

Modified: trunk/payloads/libpayload/include/libpayload.h
==============================================================================
--- trunk/payloads/libpayload/include/libpayload.h	Sat Apr 16 02:09:53 2011	(r6507)
+++ trunk/payloads/libpayload/include/libpayload.h	Sat Apr 16 02:13:17 2011	(r6508)
@@ -153,7 +153,6 @@
  * @{
  */
 void serial_init(void);
-void serial_hardware_init(int port, int speed, int word_bits, int parity, int stop_bits);
 void serial_putchar(unsigned int c);
 int serial_havechar(void);
 int serial_getchar(void);

Modified: trunk/payloads/libpayload/include/sysinfo.h
==============================================================================
--- trunk/payloads/libpayload/include/sysinfo.h	Sat Apr 16 02:09:53 2011	(r6507)
+++ trunk/payloads/libpayload/include/sysinfo.h	Sat Apr 16 02:13:17 2011	(r6508)
@@ -36,6 +36,7 @@
 struct sysinfo_t {
    unsigned int cpu_khz;
    unsigned short ser_ioport;
+	unsigned long ser_base; // for mmapped serial

int n_memranges;