Modify the artecgroup/dbe61 dts to be equivalent to v2 Config.lb. The target does not yet compile due to initram breakage, but the breakage is really old.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Index: LinuxBIOSv3-dbe61/mainboard/artecgroup/dbe61/dts =================================================================== --- LinuxBIOSv3-dbe61/mainboard/artecgroup/dbe61/dts (revision 607) +++ LinuxBIOSv3-dbe61/mainboard/artecgroup/dbe61/dts (working copy) @@ -84,8 +84,26 @@ pci@1,0 { /config/("northbridge/amd/geodelx/pci"); }; - pci@1,1 { + pci@15,0 { /config/("southbridge/amd/cs5536/dts"); + /* Interrupt enables for LPC bus. + * Each bit is an IRQ 0-15. */ + lpc_serirq_enable = "0x00001002"; + /* LPC IRQ polarity. Each bit is an IRQ 0-15. */ + lpc_serirq_polarity = "0x0000effd"; + /* 0:continuous 1:quiet */ + lpc_serirq_mode = "1"; + /* GPIO(0-0x20) for INT D:C:B:A, 0xFF=none. + * See virtual PIC spec. */ + enable_gpio_int_route = "0x0D0C0700"; + /* COM1 settings */ + com1_enable = "0"; + com1_address = "0x2f8"; + com1_irq = "3"; + /* COM2 settings */ + com2_enable = "1"; + com2_address = "0x3f8"; + com2_irq = "4"; }; }; };