Re: [coreboot] [PATCH] artecgroup/dbe61: Set up 4MB mode for LPC dongle

[Carl-Daniel Hailfinger]

On 28.05.2008 02:30, Mart Raudsepp wrote:
> artecgroup/dbe61: Set up 4MB mode for LPC dongle
>
> This way we can fit a kernel and initramfs on the dongle's free ~3.75MB space
> and have a debug system bootable right from inside the dongle. The start
> address of the dongle is mem@0xffc00000 for FILO with 4MB minus ROM area
> available.
>
> This should be a no-op when not booting from the dongle.
>
> The same change was done to artecgroup/dbe62/stage1.c in rev660.
>
> Signed-off-by: Mart Raudsepp

I don't like it that much, but then again, nothing else on this board
will ever listen to port 0x88.

Acked-by: Carl-Daniel Hailfinger

Regards,
Carl-Daniel