Hi Steve,
Nice to hear someone else in the northeast is using lb:) Methods we use to do linux bios debugging: 1. Serial 2. netconsole (same as serial but over ethernet) 3. Hardware Emulator with debugger 4. Toggling leds at certain places (i.e. like printfs for leds;)
-----Original Message----- From: linuxbios-admin@clustermatic.org [mailto:linuxbios-admin@clustermatic.org] On Behalf Of Stephen.Kimball@bench.com Sent: Wednesday, October 20, 2004 8:29 AM To: rminnich@lanl.gov Cc: linuxbios@clustermatic.org Subject: RE: Makefile changes for symbols
Ron,
Is LinuxBIOS development done with only serial port debug messages? You guys are good.
Steve
-----Original Message----- From: Ronald G. Minnich [mailto:rminnich@lanl.gov] Sent: Tuesday, October 19, 2004 5:25 PM To: Kimball, Stephen Cc: linuxbios@clustermatic.org Subject: Re: Makefile changes for symbols
On Tue, 19 Oct 2004 Stephen.Kimball@bench.com wrote:
Someone must have some experience with source code level debugging of LinuxBIOS with an American Arium ECM-50. Thanks.
wow! I want to hear about that when you get it going. Another FAQ entry.
ron _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios