Please refer to bootlog for s2885.
I have to comment out the optimized link in coherent_ht.c, and soft_reset to get the pci_regs dump in auto.c stage.
You may find that the 0:5.0 and 0:6.0 are AMD8151 bridge and device. And 0:1.0 ,0:1.1, 0:2.0, 0:2.1 are amd8131. 0:3.0 and 0:4.x are amd8111 Regards
YH.
-----邮件原件----- 发件人: YhLu 发送时间: 2004年3月25日 9:52 收件人: 'ron minnich' 抄送: 'Stefan Reinauer'; 'ebiederman@lnxi.com'; 'linuxbios@clustermatic.org' 主题: 答复: S4882 Support Done
Ron/Ollie,
Can you verify it on S2885? Because at this time only s2885 has two incoherent links to AMD8151 and AMD8131 in CPU0.
Regards
YH
-----邮件原件----- 发件人: YhLu 发送时间: 2004年3月24日 23:04 收件人: YhLu; ron minnich 抄送: Stefan Reinauer; ebiederman@lnxi.com; linuxbios@clustermatic.org 主题: 答复: S4882 Support Done
Ron,
Please commit the s2885 support.
It make ht_reset in auto.c works with s2885.
Regards
YH
-----邮件原件----- 发件人: YhLu 发送时间: 2004年3月24日 13:19 收件人: ron minnich 抄送: Stefan Reinauer; ebiederman@lnxi.com; linuxbios@clustermatic.org 主题: S4882 Support Done
Ron,
Please commit the s4882 support code.
1. Add S4882 support. 2. Modify auto.c for s2881, s2885, s4880. 3. Add some optimize_link calling in set_smp.
Regards
YH