On Thu, Dec 20, 2007 at 10:34:15PM +0800, aaron lwe wrote:
//Until you can successfully run memtest86 as a payload and it reports //zero errors, RAM has not yet been configured correctly.
OK, I get it. Thanks. Memtest86 reports errors at memory address 1MB, 5MB, 9MB, 13MB, 17MB, ... not sure what's wrong.
Many addresses around there or only exactly 1MB, 5MB etc?
corey's original patch couldn't pass ram_check, and I have no idea why.
Probably some small differences between your board and his, which is causing timing problems between the memory controller and RAM. :(
//Peter