Hi Michael,
On Wed, May 07, 2008 at 08:51:29PM +0000, Michael Rauscher wrote:
I ran into problems to enable VGA in coreboot on the ME6000.
The log:
coreboot-2.0.0.0Fallback So 4. Mai 10:09:40 CEST 2008 starting... Enabling mainboard devices Enabling shadow ram
[...]
PCI: 00:11.5 [1106/3059] enabled Error! malloc: free_mem_ptr >= free_mem_end_ptr
I ran into this problem also. I was able to get around it by modifying src/mainboard/via/epia-m/Options.lb and increasing HEAP_SIZE:
default HEAP_SIZE=0x5000
Unfortunately, I still can not get vga output on my epia-m9000.
device pci 0.0 on # PCI chip drivers/pci/onboard device pci 0.0 on end register "rom_address" = "0xfff80000" #512k image end end
I don't think adding this is right. Looking at the logs, this seems to cause vga to get initialized twice. (Unfortunately, I can't get vga output regardless of how many times it gets initialized.)
-Kevin