Dear LinuxBIOS readers!
This is the automated build check service of LinuxBIOS.
The developer "stepan" checked in revision 2776 to the LinuxBIOS source repository and caused the following changes:
Change Log: More range for HT_CHAIN_UNITID_BASE and HT_CHAIN_END_UNITID_BASE.
For example: in C51/MCP55 or C51/MCP51
Will allow 1. C51 at 0x10 to 0x14, and MCP at 0 to 4 2. C51 at 1 to 4, and MCP at 7 to 0x0a
The reason is c51/mcp51/mcp55 reported unitid is 0x0f (far beyond it needed), and will prevent us from putting them on bus 0.
Typical values for c51/mcp55 or c51/mcp51: HT_CHAIN_UNITID_BASE = 0x10 # for C51 HT_CHAIN_END_UNITID_BASE = 0 # for mcp
If only have mcp with c51, HT_CHAIN_UNITID_BASE = 0 # for MCP #HT_CHAIN_END_UNITID_BASE = 0 # default value 0x20
Signed-off-by: Yinghai Lu yinghai.lu@amd.com Acked-by: Stefan Reinauer stepan@coresystems.de
Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2776&device=hdama&... Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2776&device=e325&v... Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2776&device=e326&v... Compilation of iei:juki-511p is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2776&device=juki-511p&... Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2776&device=dk8s2&... Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2776&device=dk8x&v... Compilation of newisys:khepri has been broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2776&device=khepri&...
If something broke during this checkin please be a pain in stepan's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should be backed out.
Best regards, LinuxBIOS automatic build system